Lenovo YUM Repository
Release and Change History








Bundle Release Information:
Targeted Server Family (Machine Type): ThinkSystem SR590 (7X98, 7X99)
Targeted Operating System: RHEL7.5
YUM Repository Build Date: 2019_04_23

YUM Repository Release Version: 19A

Device:
ThinkSystem RAID 930-16i 8GB Flash PCIe 12Gb Adapter

Device Product Guide

Part Number: 4Y37A09721
Feature Code: AUNH
PCIe Sub Vendor ID: 0x1D49
PCIe Sub Device ID: 0x0607


Release History:
Release: 19A
Change History Documents
Firmware Firmware Name Version
ThinkSystem RAID 930-x xGB Flash PCIe 12Gb Adapters2Gb Adapters update BIOS and Firmware 930-50.7.0-2054
Drivers Driver Name Discreate Package Download Version
megaraid_sas
  kernel driver
kmod-megaraid_sas- 07.707.04.00_el7.5-1.x86_64.rpm 07.707.04.00_el7.5
Utilities Utility Name Version
LSI Storage Authority Software for windows and linux 004.189.000.000
StorCLI command line tool for anyos storcli-007.0713.0000.0000

Release: 18D
Firmware Firmware Name Version
ThinkSystem RAID 930-x xGB Flash PCIe 12Gb Adapters2Gb Adapters update BIOS and Firmware for windows and linux 930-50.5.0-1678
Drivers Driver Name Discreate Package Download Version
megaraid_sas
  kernel driver
kmod-megaraid_sas- 07.705.05.00_el7.5-1.x86_64.rpm 07.705.05.00_el7.5

Release: 18B
Drivers Driver Name Discreate Package Download Version
megaraid_sas
  kernel driver
kmod-megaraid_sas- 07.705.04.00_el7.5-21.x86_64.rpm 07.705.04.00_el7.5


Release 19A Change History Documents

ThinkSystem RAID 930-x xGB Flash PCIe 12Gb Adapters2Gb Adapters update BIOS and Firmware



BIOS and Firmware Update for ThinkSystem RAID 930-x xGB Flash PCIe 12Gb Adapters

Supported Adapters:  
	ThinkSystem RAID 930-8i 2GB Flash PCIe 12Gb Adapter
	ThinkSystem RAID 930-16i 4GB Flash PCIe 12Gb Adapter
	ThinkSystem RAID 930-16i 8GB Flash PCIe 12Gb Adapter
	ThinkSystem RAID 930-24i 4GB Flash PCIe 12Gb Adapter
	ThinkSystem RAID 930-8e 4GB Flash PCIe 12Gb Adapter
	ThinkSystem RAID 930-4i 2GB Flash Flex Adapter

NOTE TO SERVICE - Reference RETAIN #N/A

Version 50.7.0-2054- Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS: 7.07.00.1
	UEFI Driver: 0x07070301
	HII:  07.07.05.02
	MR FW: 5.070.00-1916
    package 50.7.0-2054

MR 7.7
	
Defects:
 - Marlin RMC: Fix checking of cores in reset during ChipReset sequence.(SCGCQ01197528) 
 - (SATA Only) Security Protocol In command complete without data transfer for allocation length not a multiple of 512.(SCGCQ01275335) 
 - Charlotte DVT (3616) - Fails PCI Express Compliance Configuration Test.(SCGCQ01320438) 
 - Enable WB support via API.(SCGCQ01405242) 
 - Aero : Assertion failure in fw\raid\mpthostcmd.c at line 2106: when run I/O overnight with NVMe drive.(SCGCQ01453837) 
 - Aero : Assertion failure in fw\cpu\arm\exceptions.c at line 938 when boot to OS with large config.(SCGCQ01455668) 
 - Ventura scatter file loads wrong via file(SCGCQ01471160) 
 - Correct preinclude dependencies.(SCGCQ01472945) 
 - Aero (Talladega) PA1: Assertion failure in fw\raid\taskman.c at line 328 during IO, consistency check.(SCGCQ01473856) 
 - Revert changes from SCGCQ01458368.(SCGCQ01484285) 
 - Ventura: MCTP PCIe VDM: Discovered flag is set in Endpoint Discovery command.(SCGCQ01486410) 
 - The soft FIFO size calculations don't take into account the data descriptor sf threshold.(SCGCQ01488633) 
 - Controller is not detecting in the storelib, after changing the mode from "set mode oob" command.(SCGCQ01494018) 
 - Correct Aero dependency issue(SCGCQ01495441) 
 - pce.c warnings.(SCGCQ01497808) 
 - Check the use of the LD BBM already tried flag.(SCGCQ01497811) 
 - TOOD AS - For Skinny running out of memory need some optimization to be done.(SCGCQ01497817) 
 - 2nd arg passed in is not what the function is expecting, fix it.(SCGCQ01497819) 
 - Reevaluate commented cache code.(SCGCQ01497856) 
 - Move RDM buffer functions to DM layer.(SCGCQ01497876) 
 - PL: Update internal macros.(SCGCQ01503214) 
 - Ventura build failure.(SCGCQ01505238) 
 - Error if PERL_DIR environment variable is set(SCGCQ01506708) 
 - FW to return the MFI_STAT_OPERATION_NOT_POSSIBLE, when RAID Level change is not supported by FW(SCGCQ01507208) 
 - Fix MPT_BuildNVMePRPfromSGL(SCGCQ01507527) 
 - RMC: Prevent leakage of P credits during SoftReset(SCGCQ01507699) 
 - Fixed IOP coverity defect for intruder(SCGCQ01508917) 
 - PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB.(SCGCQ01509770) 
 - Merge error in pceErrorInt(SCGCQ01509973) 
 - Fault 0xC00C is occurred in random read running test(SCGCQ01511237) 
 - Check if PrpDmRecoveryCheckIsPrp/DmRecoveryCheckIsPrp needs to be fixed(SCGCQ01511911) 
 - pl: backend PCIe: 4311 fault with NVMe enabled(SCGCQ01514521) 
 - Ventura hardware does not like the IOP enable method used here.(SCGCQ01514880) 
 - (SATA Only) LBPRZ bit in VPD page 0xB2 is never set for SATA devices(SCGCQ01516277) 
 - stack overflow during I2C read operation(SCGCQ01516908) 
 - pl: backend PCIe: non-NVMe endpoint not cleaned up on removal(SCGCQ01516968) 
 - Fault(0x4330) is occurred during checking MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA.(SCGCQ01518952) 
 - Hex dump of RMC ring buffer is only showing one entry.(SCGCQ01519272) 
 - [OOB]RMC/MR Crash Due to PCE Core Register Access Errata during vSAN certification Test.(SCGCQ01521255) 
 - Fixing the issues during bringup of the universal backplane.(SCGCQ01522148) 
 - pl: backend PCIe: switch attached discovery takes too long.(SCGCQ01522343) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2)(SCGCQ01523531) 
 - Ventura: Add early notification to new I2C-DMA-Less algorithm in case hardware doesn't interrupt.(SCGCQ01524953) 
 - MR 7.6: Opal: Fix compilation error (SCGCQ01525448) 
 - pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset (SCGCQ01526236) 
 - gas gauge device chemistry check(SCGCQ01526260) 
 - Handling of host PCI BAR programming changes after port enable(SCGCQ01530295) 
 - pl: NVMe: EC0D fault(SCGCQ01530402) 
 - PL Fault 0000ecdd LR 01403837 during initial discovery(SCGCQ01531770) 
 - Secure erase failure	(SCGCQ01531846) 
 - To fix issues for back plane configuration validation and LED control for the UBM backplane.(SCGCQ01533852) 
 - Ventura: Some toplevel PCE interrupts have a priority that is too low(SCGCQ01534773) 
 - pl: backend PCIe: 4311 fault (part 3)(SCGCQ01537791) 
 - After setting DGs to TR storCLI does not show DG status as TR.(SCGCQ01537949) 
 - pl: NVMe: unexpected task management halt when a device goes missing.(SCGCQ01538012) 
 - Fault 5850 occurred in random read test with Task management.(SCGCQ01538680) 
 - MR 7.6 - NVMe drive reported "Unable to access device PD xx" after reinserting.(SCGCQ01538713) 
 - pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment(SCGCQ01540226) 
 - Aero : Continous error( MptHostCmdDone cmdId=fe lmid=8a2:1851b400 tid 04 devH ..	.(SCGCQ01540433) 
 - Ventura B0: FW blocking SATA devices behind enclosures(SCGCQ01552996) 
 - (SATA Only) Incorrect sense data may be returned when a NCQ Queued Error Log data page is returned.(SCGCQ01553853) 
 - pl: backend PCIe: tweaks to the backend PCIe link configurations API.(SCGCQ01556422) 
 - Correct minimum voltage calculation of Supercap.(SCGCQ01558901) 
 - MR7.6: Enclosure no longer seen on OS level after cable pull.(SCGCQ01562109) 
 - TUR and SSU was being issued to the drive when Task Management is underway.(SCGCQ01562717) 
 - IT/PL FW Compliance to use of NO FLUSH bit in START STOP UNIT based on SAT3.(SCGCQ01563244) 
 - pl: verify that RAID context Timeout value is nonzero before adding a timer.(SCGCQ01564757) 
 - LED won't blink after setting DGs to TR in OEM system; other OEM system work(SCGCQ01565718) 
 - The timer values used in case of PD firmware download is not as per design. (SCGCQ01565780) 
 - pl: NVMe: admin command Abort Task reset type(SCGCQ01565972) 
 - Issue: JBOD devices were dropped after unloading driver and reloading driver in linux(SCGCQ01566087) 
 - pl: backend PCIe: 'pl pci swregs' debug command is broken(SCGCQ01566859) 
 - MR 7.6 PA2: Creating RAID 1 or RAID 6 array with Dedicated Hotspare bails out at line 2457 cmdStat=4e(SCGCQ01570697) 
 - MR 7.5 Alpha-Beta_Ventura:Perf drop of R0,R1,- 5% to 7% is seen in SW IO Size-4K-32K,QDs (1,4,16,64)(SCGCQ01571858) 
 - Ventura B0 Phase 7 - Fault 2805 hit after enabling auto port feature(SCGCQ01572362) 
 - To fix the LED issue, VPP data and moving to change detect poll state (SCGCQ01576165) 
 - (SATA Only) SCSI Write Long command send with out of range block address does not fail.(SCGCQ01577907) 
 - Fix OCM copy when no dirty cache	(SCGCQ01586776) 
 - ignore64ldRestriction set incorrectly causes MR_DCMD_CFG_READ to fail(SCGCQ01587700) 
 - Aero PA4.5: FW waiting for BAR Init to complete indefinitely after each OS reboot. (Proprietary PCI-E riser(SCGCQ01588734) 
 - MR7.6 storelibtest see incorrect enclosure slots count plus show device id0 twice(SCGCQ01589027) 
 - Assert when the Nvdata connector names mismatch from the MfgPage0 and ManPage7 (SCGCQ01590427) 
 - pl: vSES - Enable Swap bit support in SES page 2 (SCGCQ01590780) 
 - OEM card running 7.6 code had two regions of flash defined did not bootup after FW upgrade and powercycle(SCGCQ01592585) 
 - MR7.6:Assertion failure in ../../dma/dmaxor.c at line 1190:(retVal == SYS_DMA_STATUS_SUCCESS(SCGCQ01593643) 
 - MR7.6: Rolling message MemPoolAlloc() failed - tag="LDRMAP", size=0x17f10 (98064) failed count in last 5 seconds (0)(SCGCQ01593740) 
 - Several firmware build utilities don't compile anymore(SCGCQ01594270) 
 - iMR6.7-9440-16i: Hit Assertion failure in ../../cpu/arm/exceptions.c at line 938: 0 After loading the driver & reboot system.(SCGCQ01594719) 
 - while creating filesystem on UNMAP supported vd's and running CC in back ground will result in montask in rhel6.9.(SCGCQ01598653) 
 - NVDATA for iMR has maxChainedEnclosures set to 10; should be set to 2.(SCGCQ01598760) 
 - FW should block EPD-PT devices in JBOD to RAID personality if MFCD.enableJBOD is 0 to avoid data loss.(SCGCQ01599680) 
 - Enclosures is not exposed to Host even if exposeEnclosureToHost is set.(SCGCQ01599832) 
 - Observed Exception during Test run: IocStatus: Insufficient Resources (0006)(SCGCQ01600177) 
 - Task Management due to SATA init failure results in resource error message(SCGCQ01605610) 
 - CfgDumpAutoConfigInfo build failure(SCGCQ01614684) 
 - Fixing skinny compilation error(SCGCQ01614967) 
 - Aero - C0:Assertion failure in fw\cpu\arm\exceptions.c at line 940: 0(SCGCQ01618680) 
 - isValidSnapDumpPresent() was in VIRTUALADDR_DDR_CODE and was being called before code sections was loaded.(SCGCQ01618950) 
 - Firmware Build Utilities: AddImage utility gets flagged and removed by anti-virus software(SCGCQ01619096) 
 - Fault 0000d075 LR 043e158d during 48 hours Controller resets with and without Battery(SCGCQ01620516) 
 - Aero PA 0.45: PD went from ONLINE to SHIELD state During Multiple path cable push pull.(SCGCQ01620847) 
 - pDevInfoExt->dismCmdFailDone always stays on.(SCGCQ01623890) 
 - Aero - PL Fault 00006001 LinkRegister 04330b07(SCGCQ01627081) 
 - Ventura: Build time duration started displaying negative time.(SCGCQ01630393) 
 - MR7.7 FW returns error if StorCLIO/StorCLIF changes default value of parameter enable FDE type mix.(SCGCQ01630843) 
 - [MR7.5] Rebuild Progress 0 % logged just after OS reboot during rebuild running.(SCGCQ01631496) 
 - Controller level bit for unmap should be always enabled for 7.6.(SCGCQ01631828) 
 - DHSP are not spun down when Disk Group is set to TR.(SCGCQ01634034) 
 - Revertible HSP is not reverted back on Clear TR.(SCGCQ01634752) 
 - MR 7.6 - "NVCache has gone bad" during POST after flashing the latest package 1226 and rebooted.(SCGCQ01635062) 
 - : FW asserts when invalid parameters to set excluded ld for CC is sent to firmware.(SCGCQ01635729) 
 - Remove redundant defines.(SCGCQ01635739) 
 - After FW update, controller was not reset by the OCR command, and if user retries the command, then FW hits the exception.(SCGCQ01639394) 
 - ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA.(SCGCQ01639482) 
 - Firmware downgrade policy with secured OPAL FDE Drives.(SCGCQ01639904) 
 - MR7.6 Fix up NAND Flash Chip Model Number read from device has bad crc.(SCGCQ01640081) 
 - Disable the iMR FP IO Fine tuning changes.(SCGCQ01641453) 
 - pd.c: Correct logical error in deciding whether to allow (or not)(SCGCQ01665122) 
 - Data Corruption seen on NVME drives with Medium Errors.(SCGCQ01665227) 
 - Not to do all drives reset at the start of the boot up on each port of the controller.(SCGCQ01670965) 
 - Not able to set max no of PD using set patrol read properties in LSA/Storcli.(SCGCQ01671189) 
 - Can't instant secure erase drive vendor specific SATA OPAL drives.(SCGCQ01675808) 
 - Missing code to handle no response in MCTP transmit buffer and send busy retry.(SCGCQ01676010) 
 - ONFI initialization failure on some DVT boards.(SCGCQ01676782) 
 - Inconsistent CC progress % is logged after reboot during CC.(SCGCQ01683057) 
 - Aero RMC: Fix non-secure boot mode.(SCGCQ01683135) 
 - MR7.7: Locate PD/LD on SGPIO, is not working.(SCGCQ01683164) 
 - Ensure that chip specific code is included.(SCGCQ01683240) 
 - pl: NVMe: unnecessary SATA cleanup attempted during NVMe TM.(SCGCQ01683245) 
 - ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA.(SCGCQ01684262) 
 - Mercator: AHR failure when using workaround for SCGCQ01318807.(SCGCQ01685001) 
 - Assertion failure in pceBarUpdateIsr (ISR where FW samples the BAR addresses. (SCGCQ01685126) 
 - Ctrl fail to response when OCR occur during R6 reconstruction.(SCGCQ01686659) 
 - Enable debugDynamicmemory until Beta.(SCGCQ01697591) 
 - [iMR7.5] Memory allocation failure during RAID operation cycles under high loading.(SCGCQ01697700) 
 - vSES not handled correctly for auto rebuild.(SCGCQ01698371) 
 - Too many Unexpected Sense : "1/0/1d " logged for SATA drives.(SCGCQ01714261) 
 - Continuous firmware event when run I/O on EPD NVMe ( MptHostCmdDone cmdId=86 lmid=42d:1859a000 tid 04.(SCGCQ01714573) 
 - Eliminate SGPIO add in presence of VSES.(SCGCQ01714777) 
 - MR7.7: Firmware does not allows user to import VDs created in MR 7.5.(SCGCQ01715014) 
 - PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0.(SCGCQ01715509) 
 - Cannot stop patrol read on PD with medium errors by the stop cmd.(SCGCQ01715992) 
 - Patrol read restarts on PDs after completion on reboot.(SCGCQ01718200) 
 - Aero PA0.5: FW auto configure EPD drives to ONLINE upon insertion when FW is in Safe Mode.(SCGCQ01718871) 
 - Write journal failure wjProcessJournalEntries: failing the entry: Index: 4f53, cacheline: 46a7.(SCGCQ01718922) 
 - MR7.7: Firmware does not convert WT-CIO VDs to WT-DIO VDs when upgrade to MR 7.7 firmware.(SCGCQ01719309) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted (part 2	.(SCGCQ01727593) 
 - pl: backend PCIe: notification events for switches with no devices attached(SCGCQ01729831) 
 - When patrol read completed with Talladega 9460-8i and MR7.5 components, the customer saw Patrol read complete events were log(SCGCQ01732235) 
 - Ventura: CFGI fails if the largest MPI defined config page is not included(SCGCQ01737603) 
 - Invalidate pd slot at SOD(SCGCQ01747219) 
 - Aero build fails(SCGCQ01748072) 
 - Fatal firmware error: Line 144 in fw\raid\utils.c (SCGCQ01753351) 
 - Import config failed ( DDF_ConfigReadPd: pdCOD->cfgErrStatus 16(SCGCQ01753383) 
 -(SCGCQ01753405) 
 - Aero PA0.5: Assertion failure in fw\cfg\cfgisup.c at line 3885: wIndex==0(SCGCQ01762118) 
 - BMC emulator does not load storelibTest(SCGCQ01762267) 
 - Updated behavior as requested(SCGCQ01762855) 
 - Flashing AERO Package on Brand new controller and observed Assertion in gpio_get_output_mode on Reboot.(SCGCQ01763311) 
 - MR7.7: FW hit Assertion failure in fw\raid\mpthostcmd.c at line 1951: DMGetSpanFromDevhandle(pMpt->DevHandle(SCGCQ01763331) 
 - pl: NVMe: unexpected switch attached task management timeouts(SCGCQ01763332) 
 - iMR controller with direct attach SATA drives did not show enclosure ID ( 7.6 is OK )(SCGCQ01764496) 
 - EPD JBOD became foreign after it was locked by third party security software	(SCGCQ01765156) 
 - SGL frame resource leak during handling of NVMe R/W cmds diverted to FW(SCGCQ01767166) 
 - Check PRP functions for 1 MB IOs and make sure prpCount variable size is good enough(SCGCQ01776107) 
 - Ventura B0: 0x5842 fault while running IOs and error injection tests(SCGCQ01780777) 
 - (SATA Only) Sense descriptor not filled properly for SCSI ATA Passthrough command failed by drive with SDA bit set.(SCGCQ01784132) 
 - In the Ld snapdump, LdDumpTgtIdInfo using ld as index, which should be tgtid.(SCGCQ01786599) 
 - MR 7.7 - AddConfig : ProcessLibCommandCall failed ; rval = 0x1 while creating/adding a config(SCGCQ01788489) 
 - fix the snapdump zip file which has mismatched filenames and content.(SCGCQ01789699) 
 - pl: NVMe: ED8D fault related improvements (SCGCQ01789903) 
 - Ventura B0: Controller fault 0x7C41 observed during IO+System power cycle test(SCGCQ01790305) 
 - snapdump files are generated regardless of snapdump state(SCGCQ01790857) 
 - pl: NVMe: ECF0 fault(SCGCQ01790929) 
 - Kill adaptor during heavy IO run(SCGCQ01792088) 
 - Can't import foreign configuration with Enterprise and Opal secured VD (R0)(SCGCQ01792749) 
 - Add validData variable in to NVRAM.h	(SCGCQ01793953) 
 - remove unnecessary code and comments starting with developer's name(SCGCQ01799276) 
 - PL SATL: SANITIZE Command failing for SATA SMR drives with ZNR bit set(SCGCQ01800567) 
 - fw hit ddfconfig.c when insert the cable back enclosure.(SCGCQ01802513) 
 - Aero PA0.6: OCR occurred during copyback on a bad SATA SSD EPD(SCGCQ01804216) 
 - MR FW may return successful completion on host Rd cmd to EPD when the device is removed.(SCGCQ01804389) 
 - pl: NVMe: SCSI log page temperature may be incorrect in some cases(SCGCQ01804437) 
 - Too many lines of type "msixIdx:1f replyDescConsPtr =10-3190dfe8 replyIdx ..." in FW log when forcing a KA(SCGCQ01807325) 
 - fixed exception at medium error recovery caused by a bad drive.(SCGCQ01807457) 
 - pl: NVMe: Reference Temperature in the Temperature log page is incorrect(SCGCQ01807465) 
 - Controller hits KA because cmdblock does not complete due to pending flush.(SCGCQ01807618) 
 - Fixed merge issues.(SCGCQ01813889) 
 - Change the reserve field in structure mode param to follow spc4 spec(SCGCQ01816426) 
 - Firmware hit mem.c monstak when change from RAID mix mode profile 13 to JBOD personality(SCGCQ01817505) 
 - Disallow unmap operations for EPDs(SCGCQ01817555) 
 - pl: backend PCIe: debug info for port enable subsystem integration(SCGCQ01817645) 
 - Incorrect Element status reported in SES Page 2 by vSES when connected to an expander(SCGCQ01822333) 
 - dirty led not set on in case of supercap not present even though dirty cache is present(SCGCQ01825031) 
 - PL needs to check if we have a path to the end device before issuing a device reset to an NVMe drive as a part of TM	(SCGCQ01826234) 
 - CIT: Same EID assigned to 2 930-8i controllers(SCGCQ01830180) 
 - pl: NVMe: TransferCount in the SCSI IO error reply message may be invalid(SCGCQ01830303) 
 - 9440-8i / 9460-16i cards BCA_S LED state doesn't match with BCA-S LED Behavior Rule.(SCGCQ01832279) 
 - pl: NVMe: unexpected read/write IO failure with SkipCount error.(SCGCQ01835109) 
 - Fix to CSET SCGCQ01605489.(SCGCQ01837880) 
 - Red/Amber LED Says On Solid During NVMe SSD Rebuilds & Does Not Turn Off When Rebuild is Completed.(SCGCQ01837894) 
 - Issue: Megamon commands from MEGAMON_DCMD were not executed properly by firmware.(SCGCQ01838863) 
 - Ventura PL: New HW Workaround for 0x670A Fault(SCGCQ01841683) 
 - Incorrect target ID allocation in JBOD personality(SCGCQ01845282) 
 - MR7.6 and MR7.7 Latest ROPs failed to Flash on OEM board results in "CRC of the copied (SBR)(SCGCQ01849017) 
 - Block firmware downgrade from MR 7.7 to older ROP if users are using NVMe switch since the feature only support 7.7 and up (SCGCQ01851533) 
 - Ventura: Attaching multiple PCIe switches may cause IOP memory corruption (SCGCQ01853893) 
 - 77: FW can not inject Medium error into customer NVMes drive with big size of 4.0Tb(SCGCQ01905236) 
 - MR7.7: Missing diagnostic failed in event log when PD state goes ONLINE to SHIELD and then to FAILED(SCGCQ01927550) 
 - FW crashes when pinned cache is generated with multiple VDs.(SCGCQ01936690) 
 - During drive spin up, drives come up as 0 bytes.(SCGCQ01944951) 
 - RMC: Add full interrupt disable to SBR Reload code.(SCGCQ01212765) 
 - SCSI format command send to NVMe drives fails with CMPLIST flag set in addition to FMTDATA flag.(SCGCQ01229799) 
 - SPI reset delay needs to be enabled in B0 revs.(SCGCQ01241767) 
 - Correct merge issues.(SCGCQ01437127) 
 - FW halts when attempting to set offline PD back to Online after Pinned Cache was generated.(SCGCQ01473162) 
 - pl: NVMe: rapid device removal/add with a specific vendor backplane.(SCGCQ01487423) 
 - Ensure COL descriptor alignment.(SCGCQ01487873) 
 - This looks like a merge issue. This code is a duplicate of the same lines above.(SCGCQ01497809) 
 - Check duplicate buffer init code.(SCGCQ01497815) 
 - Unaligned fields in raid.h.(SCGCQ01497871) 
 - calculate the correct memSize for EnclDcmdGetListExt to filter out the empty sgpio enclosure when there is an external enclosure.(SCGCQ01507541) 
 - pl: backend PCIe: workaround timer may trigger after too short of an interval(SCGCQ01518343) 
 - Controller crash when doing PD erase(SCGCQ01519099) 
 - MR 7.6 - HSP failed to kick in OPAL array(SCGCQ01523568) 
 - Move the BIOS reset under a workaround bit(SCGCQ01526980) 
 - OPAL: security password change does not work(SCGCQ01531842) 
 - Aero : Assertion failure in fw\cpu\arm\exceptions.c at line 938 after COL glitch test when boot to OS(SCGCQ01538897) 
 - To fix the phy to slot mapping issue for the UBM backplane(SCGCQ01542497) 
 - MR 7.6 - FW got stuck in loop while clearing OPAL foreign PDs(SCGCQ01553035) 
 - PL: Implemented HW workaround to solve 6G SATA link fail problem(SCGCQ01554661) 
 - Ventura: If firmware download is done in small pieces, firmware download fails with logInfo 30010402(SCGCQ01558208) 
 - MR 7.6 Assertion failure in ../../dm/src/dm.c at line 1540: 0" after pwr off the enclosure to generate pinned_cache(SCGCQ01561611) 
 - After flashing GPMR2 code 50.1.0-1048 on top of MR7.6 50.6.0-1029 code a critical error message seen(SCGCQ01562108) 
 - pl: backend PCIe: EC52 fault(SCGCQ01565749) 
 - 9460-16i Montask when running SMART polling on a Toshiba SSD drive(SCGCQ01568381) 
 - SED compatibility checks(SCGCQ01570655) 
 - Performance optimizations AI(SCGCQ01571030) 
 - compile error for IMR build(SCGCQ01572902) 
 - Change CCR preprocessor(SCGCQ01573815) 
 - Flow control can miss control characters(SCGCQ01573909) 
 - Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail(SCGCQ01574224) 
 - Transport Ready On/Off test sometimes fails after 12 hours.(SCGCQ01578489) 
 - MR7.6: iMR controller unresponsive after deleting foreign config(SCGCQ01586340) 
 - MR7.6 Drive Locate Not Working for all NVMe drives on OEM system(SCGCQ01586434) 
 -(SCGCQ01587330) 
 - Remove and Truncate command handler: IO was not failed with check condition(SCGCQ01594602) 
 - MR7.6 Vmware6.5 - Incorrect fatal error EVT after PassThrough enabled followed by Guest OS power on(SCGCQ01599329) 
 - Handling review comments rearranging the logic of SGL chain pull(SCGCQ01601099) 
 - Incorrect BAY Number assigned by the FW when the Invalid bit was set in SES_SAS_ADTNL_ELMT_STS_DSRPT_EIP1(SCGCQ01601131) 
 - Ventura BST 7.6 NVMe==> (Montask: Assertion failure in ../../hw/inc/3516_inc/memory.h at line 443(SCGCQ01602556) 
 - Aero-3: make aero doesn't compile(SCGCQ01614670) 
 - Correct build issues(SCGCQ01615843) 
 - Copyback drive becomes foreign after removing/insertting drives when DG is in TR state(SCGCQ01619840) 
 - AULBA divert bitmap not enabled on R5/R6 WT Vds(SCGCQ01619858) 
 -(SCGCQ01620250) 
 - internal megamon command hangs(SCGCQ01620952) 
 - Aero3: Signed CBB hangs(SCGCQ01624857) 
 - Use LdIsValid(SCGCQ01632088) 
 - Few TR PDs are not marked foreign after DG removal and insertion(SCGCQ01638673) 
 - After removing TR DHSP and rebooting the system inserting DHSP drive becomes foreign(SCGCQ01640026) 
 - Upon inserting TR SDHSP drive import fails(SCGCQ01641758) 
 - MR7.5 18B CIT : if connection to EKMS is lost while online, drives are not in proper state after reboot(SCGCQ01670320) 
 - FW stated number of disks exceeded the max supported count with 14 PD(SCGCQ01680522) 
 - Exessive GetConnectorIndex(phyNum(SCGCQ01681563) 
 - Drive goes unexpectedly unconfigured good after escrow process(SCGCQ01682240) 
 - Continue monitoring parts capable of functioning following a code download(SCGCQ01683212) 
 - Aero DDR: DDR fails after issuing MSS reset(SCGCQ01685637) 
 - An interrupted code download could force VDs to be in write-thru mode until the next successful code download.(SCGCQ01685900) 
 - Ventura: OEM ID66 PCIe Switch backplane Slots Status Amber LEDs stay blinking(SCGCQ01687610) 
 - MR7.7: Secured JBOD FDE drive migrate from iMR (secured(SCGCQ01687761) 
 - Core 1 Execution Locks(SCGCQ01698188) 
 - Unable to recover config when changing security password before re-inserting drives(SCGCQ01715058) 
 - Aero PA0.5: PL Fault 0xD075 during preboot OCR test(SCGCQ01715535) 
 - LD Allowed Op Secure bit was set for non-secured LD(SCGCQ01718177) 
 - RMC: Need to use AHB path to write to Reset Status Register(SCGCQ01718319) 
 - Event with invalid slot # during pd insertion when a command is timed out(SCGCQ01721492) 
 - update custom3516.h changes from SCGCQ01608027 to custom3916.h(SCGCQ01733052) 
 - Aero PA0.5:FW fails to boot to SafeMode. SafeMode behavior changed from previous FW.(SCGCQ01733068) 
 - Intermittent failures in CPU trace capture FSM initialization across OCR, host restart(SCGCQ01747998) 
 - [Ventura 7.7] Coverity Fixes(SCGCQ01753268) 
 - [iMR7.5][Bristol] Amber LED doesn't turn on with PD offline(SCGCQ01767172) 
 - PD SCSI passthru (READ/WRITE commands(SCGCQ01787981) 
 - Ventura: OEM PCIe dual switch attached backplane slot status LED stays Amber on partial slots(SCGCQ01788989) 
 - Added capability to blink LED for Hotspare drive(SCGCQ01789741) 
 - MCTP: 0x265D fault occurs when running high MCTP PCIe VDM load with MCTP Discovery commands(SCGCQ01790303) 
 - Update combo serdes library version(SCGCQ01791178) 
 - Data Store creation does not complete(SCGCQ01792710) 
 - The Wrap around condition for snap-dump does not take care of few scenarios. Also add the time stamp for each snapdump in F/W(SCGCQ01798249) 
 - Aero PA0.6: Max Resets per boot cycle reached after 2 OCR cycles and controller stuck(SCGCQ01800508) 
 - Aero PA0.6: Problem = Firmware lock up while booting. Attempt to force FW into SafeMode with pinned cache present.(SCGCQ01800574) 
 - Interrupts not handled in fault state if a high priority interrupt handler faults(SCGCQ01802508) 
 - SGPIO - backplane LED does not show amber when PD is offlined.(SCGCQ01809027) 
 - HDDs spin up failed during boot time and then cause ac cycle failed after around 70 power cycles(SCGCQ01813023) 
 - Fix unsecure/rollback security on LD(SCGCQ01816643) 
 - Error message "Disabling writes to flash due to a critical error" seen during FW upgrade/downgrade MR 7.7 to MR 7.1(SCGCQ01816659) 
 - FW assertion during boot(SCGCQ01818283) 
 - Legacy BIOS Prints "This firmware is a TEST version"(SCGCQ01825992) 
 - Issue: "Overflow -- Text Discarded" messages seen in termlog.(SCGCQ01830664) 
 - Ventura PL: 0x670A Fault During Destructive Domain Testing(SCGCQ01831332) 
 - Firmware hit exception monstak when trigger BBU retention test ( /cx/bbu start retentiontest(SCGCQ01832979) 
 - Amber Drive Enclosure LED Does Not Turn On to Indicate a Failed SAS or SATA Drive(SCGCQ01840037) 
 - Unwanted prints removed(SCGCQ01873256) 
 - Data Abort Exception observed while running reboot test with a bad drive.(SCGCQ01985789) 
 - Correct defines section(SCGCQ01390738) 
 - Aero: I/O drop on NVMe partition when trigger OCR overnight with rebuild in mix mode profile 13(SCGCQ01460586) 
 - Add zlib to the build(SCGCQ01461126) 
 - Rename after merge completes as per coding standards(SCGCQ01497806) 
 - consolidate ReconInProgress using IoPathFlagReconActiveGet/Update(SCGCQ01497831) 
 - Invalid SenseBufferLowAddress in iMR(SCGCQ01509909) 
 - Correct iMR linking(SCGCQ01510048) 
 - FW hit montask intermittently and fails to flash PD FW using storeCLI(SCGCQ01523586) 
 - MR-7.6: RAID0 Volumes go to in-consistent after importing with pinned Cache.(SCGCQ01524665) 
 - MR 7.6 - FW hangs during POST while rebooting in loop(SCGCQ01545245) 
 - Merge Errors(SCGCQ01556741) 
 - Dev: Remove LD_DEALLOCATION_SUPPORT macro for unmap feature(SCGCQ01558830) 
 - MR 7.6 - FW hit mon_task while running cablepull failover in JBOD environment(SCGCQ01566599) 
 - Merge board fixes(SCGCQ01571587) 
 - Ventura B0: Slot status updates to certain slot on NVMe backplane may not update the LED status(SCGCQ01573106) 
 - FW hits assertion failure in fw\mros\mem.c at line 629 : mb->tag==tag while using OOB storelibtest creates R50(SCGCQ01577504) 
 - Replace drive failed on secured array with OPAL drives(SCGCQ01582713) 
 - 7.6--9460-16 controller: JBOD mode created raid LD tgtId is reset to 0 after changing back to RAID mode.(SCGCQ01587151) 
 - on enabling/disabling the UNMAP feature, storcli doesn't print any message asking to reboot the server(SCGCQ01595432) 
 - Unmap/Write command gets executed on EPD's when controller is in JBOD mode.(SCGCQ01607475) 
 - DISM - Assertion failure in ../../dm/src/devRemoval.c for breaking multipath during bootup(SCGCQ01618628) 
 - Many prints "T35: C0:MPT_SASPhyPage: Failed chip x00 phyNumber x09 retVal x0022" seen(SCGCQ01620617) 
 - PA1-MR-7.7-FW: Assertion when forcing kdump with chaos IOs and RHEL 6.9 x64 on R0 VD(SCGCQ01620726) 
 - Code review cleanup(SCGCQ01635769) 
 - EnclSgpioHandleDevicePresenceCallback:should never happen logic/internal seen(SCGCQ01640052) 
 - Unmap related WJ should not be present when downgraded to non-unmap supported FW(SCGCQ01641105) 
 - Assertion failure in ../../raid/taskman.c at line 139: func != NULL(SCGCQ01641743) 
 - MR 7.7 : Storcli shows incorrect data for /c0 show linkconfig for Ventura controller.(SCGCQ01655579) 
 - Cache Offload capabilities determined by component attributes instead of part numbers(SCGCQ01670387) 
 - MR7.6: Firmware hit montask running task management reset in loops(SCGCQ01675742) 
 - StorCLI fails to set TR on all DGs with "dall" option-individual DG OK(SCGCQ01681695) 
 - UNMAP commands are returned with error status on NVME JBODs/EPDs, even when UNMAP is exposed as supported(SCGCQ01683113) 
 - MR7.7:Assertion failure in fw\mros\mem.c @ line 794:Mem header and footer contents are out of sync when poweroff cmd in linux(SCGCQ01686649) 
 - FW fails to detect TR SDHSP & DHSP upon insertion(SCGCQ01687759) 
 - LSA version 4.132 shows blank page or extreme sluggish to do anything(SCGCQ01698418) 
 - Unmap capability not displayed(SCGCQ01715253) 
 - HII & StorCLI Profile list shows Profile 0(SCGCQ01718982) 
 - incrementing other error count for RECOVERED_ERROR with any asc and asc apart from 00/1d(SCGCQ01729713) 
 - Firmware ASSERT(SCGCQ01729837) 
 - (SATA Only(SCGCQ01732835) 
 - Too many SnapDumpAllocBufferMemory: Called in firmware log when do diffrent operation in LSA(SCGCQ01746171) 
 - MR7.7 Alpha: Drive Locate Not Functional with 9440-8i(SCGCQ01747208) 
 - Firmware Doesn't Print Call Stack Information During Exception Handling(SCGCQ01747586) 
 - Fix compilation errors integrating PL 7.250.02(SCGCQ01749420) 
 - fix so that LSISAS3916.xsd can generate SBR data with sas2parser.exe -binary.(SCGCQ01749453) 
 - MR7.7: FW Auto Raid0 Creation Command is failing.(SCGCQ01749779) 
 - Aero PA0.5: storcli /cx/jbodx start erase standard is not working(SCGCQ01750220) 
 - Aero PA0.5: hole in VD id assignment sequence after one or more VDs are imported(SCGCQ01750230) 
 - Controller hits KA because cmdblock does not complete due to pending flush.(SCGCQ01753381) 
 - KA on iMR w MemPoolAlloc((SCGCQ01753407) 
 - Controller is not come up after it crash with Snapdump enable(SCGCQ01764241) 
 - DevBST failing on non-BMC capable setups in the last step(SCGCQ01764502) 
 - Random prints are seen in the firmware logs in BMC_Emulator setup.(SCGCQ01775670) 
 - Change vendorIdentification to LSI for Ventura(SCGCQ01776239) 
 - StorCLI - Aero PA-0.6: Snapdump properties default values different after disabling and re-enabling its feature(SCGCQ01789798) 
 - Generate correct snapdump number information(SCGCQ01790830) 
 - Aero PA0.6: if OCR starts by entering debugger and exiting out after 3:51, FW doesn't complete OCR(SCGCQ01791025) 
 - Data corruption seen on unmap capable R5/6 LD(SCGCQ01794084) 
 - Remove the unnecessary snapdump when import incomplete foreing configuration(SCGCQ01799264) 
 - RMC locks up attempting to access A15 PC register via CoreSight(SCGCQ01800745) 
 - Aero PA0.6: FW don't POST after upgrading to pkg: 50.8.0-1447 (SCGCQ01790806(SCGCQ01802524) 
 - if host I/O is blocked by VD cache flush and PD entered shielded state, it may hit kill adapter.(SCGCQ01811249) 
 - MR crash when processing some NVMe admin-queue pass-thru commands(SCGCQ01811258) 
 - long uart dump of information after Killadapter(SCGCQ01813618) 
 - Incomplete event message(SCGCQ01824948) 
 - MR fw doesn't report that SAS_SATA 6 G and 3G capability(SCGCQ01870194) 
 - Reverting the changes delivered.(SCGCQ01886389) 
 - bounds check not correctly performed on patrol read if media defect exists on the last block of PD(SCGCQ01942077) 
 - Driver detected a FW hang with Jbod create and Del with Ctrl property change(SCGCQ01970454) 
 - Fault C010 encountered when running IO to 9405W-16e in Target Mode(SCGCQ01368001) 
 - Event shown incorrectly if supercap missing(SCGCQ01425227) 
 - Aero : Continous error " MPT_PcieDevicePage: Failed chip 0 pageNumber: 0 pageAddress 15 retVal 22" when pull out NVMe drives(SCGCQ01455656) 
 - WG: CC is not aborted when there is a replace operation triggered on a R1 VD.(SCGCQ01466733) 
 - Win/Lin Ventura MR7.5 ROP 970 , -6% regression in RAID1, 4K, SR, QD4 ( 4 workers tests(SCGCQ01537079) 
 - Smart Return Status passthru command failed on SATA drives(SCGCQ01555033) 
 - Transport Ready On/Off test fails when run for more than 6 hours.(SCGCQ01570249) 
 - 7.6 Alpha: pk1114, exception line 938 while format JBOD in Raid mode for NVMes OEM Workstation(SCGCQ01594649) 
 - FW can lose AltSel and DrvStrength(SCGCQ01635796) 
 - Purely Server: Firmware Not Logging to Flash or Can't be Uploaded with StorCLI(SCGCQ01639777) 
 - Firmware hangs during boot(SCGCQ01665148) 
 - MR PD GET info fails for SES processor(SCGCQ01685797) 
 - copy back on wrong PD type(SCGCQ01718152) 
 - MR7.6: Assertion failure in ../../mros/mem.c at line 806: mb->tag==tag after issue a reboot cmd (server reboot(SCGCQ01721366) 
 - Issue: cannot create datastore for raid 0 with unmap VD.(SCGCQ01753372) 
 - Firmware exception during rebuild on SAS and SATA R1 VDs that has 500 medium errors(SCGCQ01816682) 
 - Fault 4311 when running repeated controller resets(SCGCQ01865882) 
 - PL Spinup: Firmware Takes a Long Time to Grant Spinup to Some Drives/Phys(SCGCQ01963394) 
 - Phy Connections count not sent properly to application(SCGCQ01970476) 
 - Aero : ERROR: Exception Handler Called for Processor Core = 0 when migrate from R5 to R5(SCGCQ01489072) 
 - Multitarget builds fail(SCGCQ01556899) 
 - StorCLI return Status = Failure run storclif64.exe /c0 show largeIOsupport(SCGCQ01564798) 
 - instant erase fails(SCGCQ01566600) 
 - Disk Group drives become unconfig good upon insertion when DHSP has remained in the system(SCGCQ01588846) 
 - Update BST scripts for JBOD personality auto BST(SCGCQ01685004) 
 - MR7.7: OPAL R0 PD goes missing/failed if pulled & reinserted < 3 secs.(SCGCQ01697879) 
 - After deleting Drive Group, dedicated hot spare assigned to the drive group did not become unconfig good(no other drive group present(SCGCQ01813795) 
	and remained as global hot spare
 - Merge issue resulting in compilation error(SCGCQ01851569) 
 - Resolve merge conflicts(SCGCQ01533348) 
 - Disable OPAL SED feature on 7.6(SCGCQ01571711) 
 - iMR: virtual memory mappings with different cache properties in violation of ARM rules(SCGCQ01606621) 
 - LAS does not show proper state of secured locked drives.(SCGCQ01615781) 
 - An error message "03/22/18:EnclSgpioLocatePd[1198]: Invalid Slot Number [255] For Pd[134]" after clearing config from LSA(SCGCQ01665275) 
 - Return appropriate error codes in function cfgDcmdAddCheckParams - Unable to import CIO VD(SCGCQ01737595) 
 - Change __SERIES_3916__ to SERIES_3916(SCGCQ01776572) 
 - Duplicated SnapDump ID Seen when the series of dumps are created and retrieved.(SCGCQ01789861) 
 - OPAL Error recovery(SCGCQ01559776) 
 - [UNMAP] 7.6 PA2 : UNMAP doesn't get disabled when a drive which doesn't support UNMAP becomes part of the VD(SCGCQ01572067) 
 - Correct IoPathFlagReconActiveGet(SCGCQ01632090) 
 - MR7.7: iMR FW hit assertion montsk((SCGCQ01641570) 
 - Aero PA0.5: FW fails to create VD in Profile 12 when you have 208 VD's and you delete 16 VD's and try to create 16 more VD's(SCGCQ01761452) 
 - Firmware Boot Fault when Performing Online Firmware Upgrade(SCGCQ01786671) 
 - ChianMid issue handling for NVMe based volumes(SCGCQ01922016) 
 - DG and its SDHSP drives become unconfigure bad upon removal & insertion(SCGCQ01570451) 
 - Patrol read progress pause when user try to change profile(SCGCQ01614870) 
 - Drives are reverted back to JBOD after perfoming instant secure erase(SCGCQ01615777) 
 - FW DDR Initialization Doesn't Correctly Account for Bus Width(SCGCQ01697679) 
 - Same EID assigned to 2 530-8i controllers(SCGCQ01883096) 
 - Remove CSET SCGCQ01961503(SCGCQ01991115 port of SCGCQ01990091) 
 - PL : Task management timeout is observed if the task management type is invalid(SCGCQ01980452 port of SCGCQ01969521) 
 - Ventura: Use full Slot Cap Physical Slot Number field info for PCIe SW attached device slot enumeration(SCGCQ01969772 port of SCGCQ01936123) 
 - (vSES) Injecting error on I2C channel of one connector module will cause LED of another connector module to not work.(SCGCQ01961504 port of SCGCQ01955094) 
 - Heavy IO with low IO timeout test may result into an IO getting missed.(SCGCQ01867066 port of SCGCQ01631346) 
 - To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues(SCGCQ01851006 port of SCGCQ01851006) 
 - [Ventura][PL] TM Hangs when doing drive push pull test case(SCGCQ01817008 port of SCGCQ01792208) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted(SCGCQ01794153 port of SCGCQ01760627) 
 - IOC_CTRL_OP_ALL_PHY_LOOPBACK operation is not working(SCGCQ01792619 port of SCGCQ01670396) 
 - IO not completing or being timed out if some cases when an unconfirmed response is received for an IO.(SCGCQ01767091 port of SCGCQ01718897) 
 - Host memory corruption seen during Progress polling of Sanitize operation on SATA drives(SCGCQ01762343 port of SCGCQ01721050) 
 - MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events(SCGCQ01760767 port of SCGCQ01742362) 
 - (SATA Only(SCGCQ01745744 port of SCGCQ01732835) 
 - Unhandled exception results in a fault(SCGCQ01721368 port of SCGCQ01686666) 
 - (SATA only(SCGCQ01720496 port of SCGCQ01681441) 
 - (SATA only(SCGCQ01714249 port of SCGCQ01681441) 
 - Not all NVMe drives discovered as part of hot plug operation(SCGCQ01713380 port of SCGCQ01697329) 
 - VPD is not shown by lspci(SCGCQ01698316 port of SCGCQ01687750) 
 - Mercator Phase7: VMWare PSODs due to NMI error when the Windows VM that has passthrough controller is being shutdown(SCGCQ01697675 port of SCGCQ01617769) 
 - Ventura B0: Fault 0x4311 while running HBA phys off/on & drive hard reset(SCGCQ01687743 port of SCGCQ01619417) 
 - IO unit control IOC_CTRL_OP_ALL_PHY_LOOPBACK_DIAG hangs on 8 phy controller(SCGCQ01687624 port of SCGCQ01623477) 
 - pl: NVMe: E411 fault(SCGCQ01686689 port of SCGCQ01684788) 
 - Not all NVMe drives were discovered after server cold or warm boot(SCGCQ01686240 port of SCGCQ01664963) 
 - Not to do all drives reset at the start of the boot up on each port of the controller(SCGCQ01682349 port of SCGCQ01670965) 
 - Ventura: Disable drive presence based PCIe RefClk and PERST control for OEM ID66 backplane(SCGCQ01676883 port of SCGCQ01670180) 
 - MCTP: Fault 0x265d while doing enclosure pull/push with OOB StoreLibIT when enabling AEN(SCGCQ01675747 port of SCGCQ01631826) 
 - PL: Change to Customer Specific SMP Response Report Manufacturer(SCGCQ01641073 port of SCGCQ01505468) 
 - Align vSES diag page response with Expander SEP diag page response(SCGCQ01639886 port of SCGCQ01585387) 
 - SES Page 2 Overall Status-Status Info bits do not reflect the correct status after fault conditions are cleared(SCGCQ01639873 port of SCGCQ01620243) 
 - Blank Boards with Auto Port Enable set in NVDATA will fault(SCGCQ01639859 port of SCGCQ01553238) 
 - SES Page 2 does not show the correct status information for Direct Attached NVMe drives(SCGCQ01639840 port of SCGCQ01620857) 
 - Negotiated Link Speed for the vSES target is displayed as 'Unknown'.(SCGCQ01639536 port of SCGCQ01606720) 
 - Ventura B0: 5813 fault while running destructive domain test(SCGCQ01630895 port of SCGCQ01623624) 
 - Ventura: No easy way to tell if config pages have been written(SCGCQ01630398 port of SCGCQ01630331) 
 - (SATA Only(SCGCQ01630267 port of SCGCQ01628346) 
 - The PCIe reset to be handled properly for the Change detect feature(SCGCQ01628453 port of SCGCQ01623437) 
 - The PCIe reset to be handled properly for the Change detect feature(SCGCQ01628451 port of SCGCQ01623437) 
 - The change detect feature macro missing, leading to compilation issue(SCGCQ01628450 port of SCGCQ01616460) 
 - To implement the CHANGE_DETECT GPIO feature for the UBM backplanes(SCGCQ01628439 port of SCGCQ01507506) 
 - When spinup delay in expander is configured to a high value it might result in some drives being reset by controller repeatedly.(SCGCQ01628174 port of SCGCQ01601413) 
 - IO starvation and performance degradation when using dma Q masking feature(SCGCQ01627326 port of SCGCQ01505074) 
 - Not all NVMe drives are discovered on VPP backplane Enclosure(SCGCQ01623525 port of SCGCQ01620856) 
 - pl: NVMe: 61A6 fault(SCGCQ01619934 port of SCGCQ01602703) 
 - PL Enclosure Management: SEP Blink Request Fails After Path 1 Disconnect in Multipath Topology(SCGCQ01619021 port of SCGCQ01618625) 
 - pl: backend PCIe: EC59 fault(SCGCQ01618750 port of SCGCQ01615981) 
 - Task Management due to SATA init failure results in resource error message(SCGCQ01618661 port of SCGCQ01605610) 
 - (SATA Only) ATA Request Sense Ext command being sent after ATA command translated for SCSI Start Stop Unit command fails with Sense Data Available.(SCGCQ01618209 port of SCGCQ01599542)
 - (SATA Only) Timer for SCSI Write Verify command to a SATA drive might get removed before command completion.(SCGCQ01616558 port of SCGCQ01593136) 
 - Increase the default SES buffer size to 2K(SCGCQ01616503 port of SCGCQ01506013) 
 - (SATA Only) Incorrect data sent in response of SCSI Inquiry command for some SATA drives.(SCGCQ01616465 port of SCGCQ01599707) 
 - (SATA Only) ATA Request Sense Ext command not sent for failed SCSI Unmap command sent to a SATA drive(SCGCQ01615209 port of SCGCQ01593844) 
 - (SATA Only) ATA Request Sense Ext command sometimes not send when the drive responds with 'Sense Data Available' bit set.(SCGCQ01615159 port of (SCGCQ01571933) 
 - (SATA Only) SCSI Unmap command to some SATA drives are timing out.(SCGCQ01615122 port of SCGCQ01539572) 
 - pl: NVMe: D102 fault(SCGCQ01608155 port of SCGCQ01605590) 
 - DDRlib failures occur if debug prints are disabled.(SCGCQ01599770 port of SCGCQ01482222) 
 - Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail(SCGCQ01598554 port of SCGCQ01574224) 
 - pl:NVMe: Write Long (10) fails when LBA exceeds 0x7FFFFFFF(SCGCQ01595859 port of SCGCQ01593652) 
 - pl: NVMe: device may not appear in OS following NVMe init failure(SCGCQ01594709 port of SCGCQ01593528) 
 - To fix the LED issue, VPP data and moving to change detect poll state(SCGCQ01582246 port of SCGCQ01576165) 
 - To fix issues for back plane configuration validation and LED control for the UBM backplane.(SCGCQ01582240 port of SCGCQ01533852) 
 - Fixing the issues during bringup of the universal backplane.(SCGCQ01581911 port of SCGCQ01522148) 
 - pl: backend PCIe: 4311 fault (part 3(SCGCQ01574924 port of SCGCQ01537791) 
 - Collect enclosure Bay ID from OEM specificinternal backplanes(SCGCQ01562101 port of SCGCQ01503517) 
 - Performance Improvements(SCGCQ01562098 port of SCGCQ01455538) 
 - pl: backend PCIe: switch attached discovery takes too long(SCGCQ01556426 port of SCGCQ01522343) 
 - PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path(SCGCQ01556419 port of SCGCQ01520524) 
 - Increase the default SES buffer size to 2K(SCGCQ01540666 port of SCGCQ01506013) 
 - PL Fault 0000ecdd LR 01403837 during initial discovery(SCGCQ01539840 port of SCGCQ01531770) 
 - PL: Change to Customer Specific SMP Response Report Manufacturer(SCGCQ01533308 port of SCGCQ01505468) 
 - PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB(SCGCQ01529512 port of SCGCQ01509770) 
 - pl: backend PCIe: non-NVMe endpoint not cleaned up on removal(SCGCQ01529383 port of SCGCQ01516968) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01525228 port of SCGCQ01450475) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2(SCGCQ01523550 port of SCGCQ01523531) 
 - pl: NVMe: rapid device removal/add with a specific vendor backplane(SCGCQ01522511 port of SCGCQ01487423) 
 - pl: backend PCIe: workaround timer may trigger after too short of an interval(SCGCQ01519802 port of SCGCQ01518343) 
 - Need to expose pure SEP devices through the inventory command(SCGCQ01519056 port of SCGCQ00943216) 
 - STANDBY_Z Bit Not Set in POWER CONDITION MODE PAGE When Mode Sense (10(SCGCQ01518957 port of SCGCQ00845242) 
 - (SATA Only) Signature FIS not validated for Expander attached SATA drives(SCGCQ01514869 port of SCGCQ00852290) 
 - IOP: Faulting for L2 Cache Correctable Errors(SCGCQ01514707 port of SCGCQ01264714) 
 - Fault State (0x265d(SCGCQ01514262 port of SCGCQ00856085) 
 - Fault State (0x265d(SCGCQ01513298 port of SCGCQ00856085) 
 - PL: SAS3 PHASE12 RAID creation failing with SATA drives.(SCGCQ01512834 port of SCGCQ00998155) 
 - IOP: Faulting for correctable L2 parity errors(SCGCQ01512800 port of SCGCQ00934325) 
 - IOP: Differentiate between L2 correctable and uncorrectable faults(SCGCQ01512630 port of SCGCQ00929810) 
 - SATA ONLY: VPD page 0xB2 LBPU bit not set correctly.(SCGCQ01511589 port of SCGCQ01374552) 
 -(SCGCQ01431063 port of SCGCQ01415060) 
 - 9305-16i - Activity LED signal is not asserted for port 2 and 3.(SCGCQ01382008 port of SCGCQ01318981) 
 - PL: Error LED stays on when drive is pulled out when using unusual slot mapping and drive presence check(SCGCQ01222315 port of SCGCQ01157331) 
 - Parameter Page Invalid, Setting channel count based on DDR Size.(SCGCQ01442953 port of SCGCQ01440768) 
 - MR7.4 Beta: Direct Attached SAS HDDs go Unconfigured Bad at Power-On (ROP 834 & earlier is OK(SCGCQ01491155 port of SCGCQ01487263) 
 - rename the function .(SCGCQ01540240 port of SCGCQ01523374) 
 - 2nd attempt to set SubOem via OOB fails(SCGCQ01561807 port of SCGCQ01542531) 
 - MR7.3.1_Assertion failure in ../../dma/dmaxor.c at line 1180:(SCGCQ01574070 port of SCGCQ01482384) 
 - Set ldRestriction appropriately in MFCD parameters and persistent config pages(SCGCQ01578302 port of SCGCQ01487406) 
 - Incorrect Micron NAND Model Number read from flash(SCGCQ01579248 port of SCGCQ01531136) 
 - STP Passthru commands end up with blank FiS response buffer(SCGCQ01582504 port of SCGCQ01576179) 
 - Drive Fault LED lighting but drive seems good(SCGCQ01582515 port of SCGCQ01567500) 
 - CC doesn't start on special built OEM firmware(SCGCQ01582533 port of SCGCQ01559661) 
 - 9460-8i is reporting Chip Temperature of 255 when the ambient temp is about 0 C(SCGCQ01582535 port of SCGCQ01565568) 
 - 9460-8i is reporting Chip Temperature of 255 when the ambient temp is about 0 C(SCGCQ01582536 port of SCGCQ01565568) 
 - Linux driver incorrect issuing MR_DCMD_DEV_GET_TARGET_PROP to enclosure devices(SCGCQ01603016 port of SCGCQ01403758) 
 - Use redundant copies of NVRAM for COL(SCGCQ01605531 port of SCGCQ01516947) 
 - Adding the code to clear the device restriction in case of firmware download failure return from the device(SCGCQ01605591 port of SCGCQ01392785) 
 - Rebuild reported as in progress instead of a paused state when not at OS.(SCGCQ01605608 port of SCGCQ01301433) 
 - Enhance Messaging Unit error ISR to dump debug information of virtual functions having error(SCGCQ01605632 port of SCGCQ01553249) 
 - MR FW: Select SAS1/PDB1 BISR group by setting BisrSmsG = 0x0C in BISR Control register during Initial Power Up.(SCGCQ01614614 port of SCGCQ01614205) 
 - Enclosures is not exposed to Host even if exposeEnclosureToHost is set.(SCGCQ01615762 port of SCGCQ01599832) 
 - Smart Return Status passthru command failed on SATA drives(SCGCQ01617112 port of SCGCQ01555033) 
 - [OOB]RMC/MR Crash Due to PCE Core Register Access Errata during vSAN certification Test(SCGCQ01617139 port of SCGCQ01521255) 
 - JBOD pred fail drive amber LED behavior not as expected(SCGCQ01622027 port of SCGCQ01583521) 
 - The Auto Config feature not present in HII(SCGCQ01627671 port of SCGCQ01406286) 
 - Patrol read progress pause when user try to change profile(SCGCQ01628441 port of SCGCQ01614870) 
 - Coding standard defect found during Dev Review(SCGCQ01629342 port of SCGCQ01628784) 
 - Virtual drive shows failed after creating 240 VDs(SCGCQ01631156 port of SCGCQ01624871) 
 - Issue: JBOD devices were dropped after unloading driver and reloading driver in linux(SCGCQ01633028 port of SCGCQ01566087) 
 - Increase the recon BB list entries to align with BBM MAX BAD entries(SCGCQ01633667 port of SCGCQ01623254) 
 - MR/iMR fill the tty log with congested I2C 4 Timeout events(SCGCQ01634722 port of SCGCQ01575197) 
 - Assertion failure in ../../cpu/arm/exceptions.c at line 938 observed while running push/pull of JBOD with IO(SCGCQ01639246 port of SCGCQ01616664) 
 - : FW asserts when invalid parameters to set excluded ld for CC is sent to firmware.(SCGCQ01639939 port of SCGCQ01635729) 
 - Event Log Corruption.(SCGCQ01641725 port of SCGCQ01451417) 
 - [MR7.5] Rebuild Progress 0 % logged just after OS reboot during rebuild running(SCGCQ01670392 port of SCGCQ01631496 ) 
 - After FW update, controller was not reset by the OCR command, and if user retries the command, then FW hits the exception(SCGCQ01681867 port of SCGCQ01639394) 
 - LAS does not show proper state of secured locked drives.(SCGCQ01683098 port of SCGCQ01615781) 
 - OCR is disabled by default for 9460-8i 2Gb(Talladega(SCGCQ01683353 port of SCGCQ01640678) 
 - LD Create blocks during crypto erase.(SCGCQ01685873 port of SCGCQ01639908) 
 - Parallel FW update on Configured drives w/o using force returns success message(SCGCQ01687074 port of SCGCQ01676420) 
 - HII allows setting controller personality through Manage Controller Profile menu(SCGCQ01714802 port of SCGCQ01685583) 
 - HII - HII reports "Invalid Value" popup when attempting to view a PD after switching to eHBA mode (before rebooting(SCGCQ01714804 port of SCGCQ01685785) 
 - After pulling some VDs, and rebooting, the remaining VD shows as foreign in RAID mode.(SCGCQ01714810 port of SCGCQ01698268) 
 - Not able to set max no of PD using set patrol read properties in LSA/Storcli(SCGCQ01722279 port of SCGCQ01671189) 
 - [iMR7.5] Memory allocation failure during RAID operation cycles under high loading(SCGCQ01727272 port of SCGCQ01697700) 
 - Purely Server: Firmware Not Logging to Flash or Can't be Uploaded with StorCLI(SCGCQ01732049 port of SCGCQ01639777) 
 - Logical Block Provisioning VPD Page (0xB2(SCGCQ01732074 port of SCGCQ01715293) 
 - Unable to abort a personality change and switch back to current personality without rebooting(SCGCQ01742563 port of SCGCQ01731927) 
 - FW reports incorrect error when attempting to import a VD when max VDs are configured.(SCGCQ01742565 port of SCGCQ01731942) 
 - Add new field to MrParamsPage1 in 3508.xsd and 3516.xsd(SCGCQ01742569 port of SCGCQ01742549) 
 - MR7.5 18B CIT : if connection to EKMS is lost while online, drives are not in proper state after reboot(SCGCQ01742585 port of SCGCQ01670320) 
 - 9460-16i UEFI HII doesn't show SMART Error while inserting a SMART failing drive. However 9361 works fine(SCGCQ01746340 port of SCGCQ01713714) 
 - Patrol read restarts on PDs after completion on reboot(SCGCQ01746342 port of SCGCQ01718200) 
 - Controller timestamp incorrect after performing an OCR.(SCGCQ01750291 port of SCGCQ01732066) 
 - Pinned cache is not flushed after importing drive in VD with pinned cache(SCGCQ01750308 port of SCGCQ01620531) 
 - Inconsistent CC progress % is logged after reboot during CC(SCGCQ01753387 port of SCGCQ01683057) 
 - Cannot stop patrol read on PD with medium errors by the stop cmd(SCGCQ01753389 port of SCGCQ01715992) 
 - Assertion failure in ../../cpu/arm/exceptions.c at line 938 observed, while deleting VD's with BG IO's(SCGCQ01753393 port of SCGCQ01713234) 
 - Importing a foreign secured drive with a different security key does not auto configure as an EPD after being unlocked.(SCGCQ01763494 port of SCGCQ01739088) 
 - No way to view the new API supportForcePersonalityChange bit.(SCGCQ01776329 port of SCGCQ01764237) 
 - FW setting support force bit with 1. Expectation is this should be set to 0 for external controller.(SCGCQ01776331 port of SCGCQ01764348) 
 - CLI does not block ERASE for ePD (non-RAID/JBOD(SCGCQ01776338 port of SCGCQ01765887) 
 - Reduce bootup time by 15-20 seconds(SCGCQ01785008 port of SCGCQ01735563) 
 - Unmap R5/6: Implementation supporting new API and logic(SCGCQ01789235 port of SCGCQ01760871) 
 - Smart Return Status passthru command failed on SATA drives(SCGCQ01802574 port of SCGCQ01555033) 
 - MR FW return only compatible profiles(SCGCQ01809003 port of SCGCQ01789037) 
 - Controller will assert during system boot with Pinned Cache and Foreign drives present.(SCGCQ01809087 port of SCGCQ01729754) 
 - FW is not blocking switching to an unsupported profile(SCGCQ01809222 port of SCGCQ01698176) 
 - Aero PA0.6: FW don't POST after upgrading to pkg: 50.8.0-1447 (SCGCQ01790806(SCGCQ01811270 port of SCGCQ01802524) 
 - Block appropriate commands for JBOD drives.(SCGCQ01813887 port of SCGCQ01640051) 
 - After the pd pull push of one drive locate is getting stopped on other PD(SCGCQ01816664 port of SCGCQ01792324) 
 - Cachevault flash size is showing as 0KB for the controller(SCGCQ01816665 port of SCGCQ01792360) 
 - OOB SCSI passthru command (READ DEFECT 12(SCGCQ01817903 port of SCGCQ01793262) 
 - Dev-Defect: Moved the implementation and prototype of the function LdSetSecurity((SCGCQ01818291 port of SCGCQ01807427) 
 - FW assertion during boot(SCGCQ01824209 port of SCGCQ01818283) 
 - if host I/O is blocked by VD cache flush and PD entered shielded state, it may hit kill adapter.(SCGCQ01826257 port of SCGCQ01811249) 
 - MR FW may return successful completion on host Rd cmd to EPD when the device is removed.(SCGCQ01826259 port of SCGCQ01804389) 
 - FW returns success for enabling encryption when it is failed on the drives(SCGCQ01841150 port of SCGCQ01830718) 
 - Erase operation is not happening on Multiple VDs(SCGCQ01842475 port of SCGCQ01835727) 
 - Controller hits KA because cmdblock does not complete due to pending flush.(SCGCQ01845204 port of SCGCQ01807618) 
 - dirty led not set on in case of supercap not present even though dirty cache is present(SCGCQ01866204 port of SCGCQ01825031) 
 - Firmware exception during rebuild on SAS and SATA R1 VDs that has 500 medium errors(SCGCQ01878349 port of SCGCQ01816682) 
 - erroneous configurable PD count decrement(SCGCQ01882408 port of SCGCQ01864432) 
 - MR_7.8: Fail to perform OCR , after FW upgrade from MR 7.7 to 7.8(SCGCQ01899545 port of SCGCQ01823917) 
 - Exposing Write cache as disabled to host for a performance improvement(SCGCQ01900925 port of SCGCQ01845298) 
 - Firmware ASSERT(SCGCQ01917788 port of SCGCQ01729837) 
 - Check the usage of SGE address in DmProcessBufferWaitQueue(SCGCQ01918166 port of SCGCQ01866804) 
 - Incorrect clearing of GUID to target ID map table during EPD creation(SCGCQ01920137 port of SCGCQ01909341) 
 - Observed Fatal Firmware Error on Talledega card during SLES 12 O/S installation.(SCGCQ01927603 port of SCGCQ01909779) 
 - Disable debug queue support(SCGCQ01930418 port of SCGCQ01880124) 
 - copyback fail to start on some PDs(SCGCQ01934952 port of SCGCQ01839637) 
 - CSCvm76418 - Locate LED for UG and JBOD drives connected to Talledega is not off after hot plug.(SCGCQ01942462 port of SCGCQ01927362) 
 - Firmware fault when continuously creating and deleting VDs/EPDs using attached batch script(SCGCQ01962221 port of SCGCQ01864769) 
 - SMP pass through not working when the “PD 0” is BAD drive(SCGCQ01978865 port of SCGCQ01945602) 
 - Source code uses tlbInitHDCW and HDCW instead of HCDW(SCGCQ01118580 port of SCGCQ01089693) 
 - vSES: CRIT or NON CRIT bits in Enclosure Status Diagnostic page are never set.(SCGCQ01967410 port of SCGCQ01942781) 
 - SATA: IO Timeouts with Read/Write and Non-Automated IO(SCGCQ01966771 port of SCGCQ01958700) 
 - (NVME) Fw Fault (faultcode 0xEC56) hit while performing system reboot test with NVMe drives attached.(SCGCQ01944366 port of SCGCQ01932728) 
 - Ventura: In mixed topology, attn LED is non-functional for SAS/SATA drives on OEM backplane(SCGCQ01941124 port of SCGCQ01930666) 
 - Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes.(SCGCQ01897348 port of SCGCQ01671177) 
 - (SATA Only) SCSI Start Stop Unit command with power condition set to standby may fail for SATA drives.(SCGCQ01867137 port of SCGCQ01833392) 
 - [ventura] PL Fault 0000ecc9 observed, while running doing drive Pull-Push with IO's in background(SCGCQ01817257 port of SCGCQ01804290) 
 - Data NAK of large master TX packet can stop I2C out of band(SCGCQ01766431 port of SCGCQ01713685) 
 - PL support for monitoring the progress of sanitize operation.(SCGCQ01753174 port of SCGCQ01591935) 
 - PL: Avoid Duplicate Mid Workaround Does Not Start a TM If Device is Removed and Re-Added(SCGCQ01748033 port of SCGCQ01715677) 
 - The x4 link configuration was not detected by UBM module(SCGCQ01735502 port of SCGCQ01735485) 
 - Not all NVMe drives discovered as part of hot plug operation(SCGCQ01732136 port of SCGCQ01697329) 
 - Not all NVMe drives were discovered after server cold or warm boot(SCGCQ01732107 port of SCGCQ01664963) 
 - PL: Port Glitch on Direct Attached SATA drives,lead IO stop/File system become read only(SCGCQ01646094 port of SCGCQ01572062) 
 - (SATA Only) SCSI Log Select command not failed with check condition when translated ATA command is failed by SATA drive.(SCGCQ01633320 port of SCGCQ01631836) 
 - The change detect feature macro missing, leading to compilation issue(SCGCQ01628445 port of SCGCQ01616460) 
 - Change detect feature support on UBM supported back plane(SCGCQ01628444 port of SCGCQ01605371) 
 - Device block and unblock messages observed for the existing connected NVMe drives when new NVMe drive is inserted(SCGCQ01628423 port of SCGCQ01615532) 
 - pl: NVMe: ECEC fault(SCGCQ01623903 port of SCGCQ01620613) 
 - Ventura: Duplicate slot numbers assigned for drives in certain mixed mode cabling configurations(SCGCQ01623485 port of SCGCQ01606122) 
 - pl: NVMe: hot-added device may not appear in OS during heavy IO load(SCGCQ01619018 port of SCGCQ01616267) 
 - Ventura: FW Signing Support failing with loginfo during FWDL(SCGCQ01618988 port of SCGCQ01605427) 
 - (SATA Only(SCGCQ01618558 port of SCGCQ01605100) 
 - Requested capacity field translations are incorrect for remove element & truncate command(SCGCQ01614097 port of SCGCQ01510418) 
 - Ventura B0 Phase 7 - Fault E404 during IOTM testing with 24 NVMe drives and 3 switches(SCGCQ01600602 port of SCGCQ01570622) 
 - pl: backend PCIe: generic message header dWords 2 and 3 are swapped(SCGCQ01599051 port of SCGCQ01598812) 
 - (SATA Only(SCGCQ01593192 port of SCGCQ01539572) 
 - pl: NVMe: modify Bus Master Enable usage during NVMe controller reset(SCGCQ01587095 port of SCGCQ01581273) 
 - To fix the phy to slot mapping issue for the UBM backplane(SCGCQ01582244 port of SCGCQ01542497) 
 - Performance Improvements(SCGCQ01562099 port of SCGCQ01455538) 
 - pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment(SCGCQ01556893 port of SCGCQ01540226) 
 - covery defects on Intruder 19849 & 19842(SCGCQ01542431 port of SCGCQ01484250) 
 - Storlib observed ERROR_MCTP_PAYLOADID_PE_INVALID_PARAM while doing attn-btn test(SCGCQ01542429 port of SCGCQ01423338) 
 - pl: NVMe: EC0D fault(SCGCQ01533267 port of SCGCQ01530402) 
 - Controller is not detecting in the storelib, after changing the mode from "set mode oob" command(SCGCQ01530310 port of SCGCQ01494018) 
 - (SATA Only) LBPRZ bit in VPD page 0xB2 is never set for SATA devices(SCGCQ01524353 port of SCGCQ01516277) 
 - Ventura hardware does not like the IOP enable method used here.(SCGCQ01519729 port of SCGCQ01514880) 
 - Coverity defects : The function seem called twice and identical code in different branches.(SCGCQ01516906 port of SCGCQ00939071) 
 - PL: SSD drop by SAS3008 during the hotplug test.(SCGCQ01516685 port of SCGCQ00897639) 
 - MR: Loading SBR with OFU causes system hang(SCGCQ01484420 port of SCGCQ01479700) 
 - SED Drive become UBad during secure erase on MegaRAID 9361-8i controller(SCGCQ01500319 port of SCGCQ01473188) 
 - 2nd arg passed in is not what the function is expecting, fix it(SCGCQ01537762 port of SCGCQ01497819) 
 - MR FW is not erasing ONFI and preparing ONFI for next offload right after flushing WJ entries(SCGCQ01570641 port of SCGCQ01564788) 
 - OCR hangs with IOs running(SCGCQ01570645 port of SCGCQ01564793) 
 - IO pauses for ~40 seconds when connecting/removing Multi-path cable(SCGCQ01570650 port of SCGCQ01505186) 
 - FW crashes while browsing configuration page MR Controller with Foreign configuration(SCGCQ01572305 port of SCGCQ01508045) 
 - Event with enclose 0x00 slot 0 during the system boot when a command is timed out (Command timeout on PD 12(e0x00/s0(SCGCQ01582499 port of SCGCQ01520443) 
 - SATA PassTrough commands with check condition taking long time to complete.(SCGCQ01582511 port of SCGCQ01561887) 
 - FW hits assertion failure in fw\mros\mem.c at line 629 : mb->tag==tag while using OOB storelibtest creates R50(SCGCQ01592822 port of SCGCQ01577504) 
 - Add logging messages in addition to previous fixes of a related issue, as requested by the Customer.(SCGCQ01602618 port of SCGCQ01584278) 
 - Ensure COL descriptor alignment(SCGCQ01616991 port of SCGCQ01487873) 
 - FW halts when attempting to set offline PD back to Online after Pinned Cache was generated(SCGCQ01616996 port of SCGCQ01473162) 
 - Correct minimum voltage calculation of Supercap(SCGCQ01619844 port of SCGCQ01558901) 
 - Colusa SAS expander reset results in unpredictable performance(SCGCQ01622026 port of SCGCQ01455811) 
 - Deletion of multiple VDs may fail via sideband in a MAXCONFIG setup (192 VDs(SCGCQ01631153 port of SCGCQ01590467 ) 
 - Inspect power loss for gaps(SCGCQ01641094 port of SCGCQ01569241) 
 - Sanitize progress in TTY log showing incorrect elapsed time(SCGCQ01681593 port of SCGCQ01630577) 
 - Assertion failure in ../../raid/taskman.c at line 139: func != NULL(SCGCQ01681821 port of SCGCQ01641743) 
 - NVDATA for iMR has maxChainedEnclosures set to 10; should be set to 2(SCGCQ01683362 port of SCGCQ01598760) 
 - Cache Offload capabilities determined by component attributes instead of part numbers(SCGCQ01684661 port of SCGCQ01670387) 
 - Sense code errors on PD's after FW is updated on them(SCGCQ01687073 port of SCGCQ01620609) 
 - MR 7.7 : Storcli shows incorrect data for /c0 show linkconfig for Ventura controller.(SCGCQ01697547 port of SCGCQ01655579) 
 - FW is not blocking switching to an unsupported profile(SCGCQ01714808 port of SCGCQ01698176) 
 - Drive offline FW download with mode E(offline method(SCGCQ01732072 port of SCGCQ01687616) 
 - Discrepancies between eHBA and RAID mode for cli show all output fields.(SCGCQ01750310 port of SCGCQ01729848) 
 - Disable Controller Security is not blocked after importing secure EPDs.(SCGCQ01750312 port of SCGCQ01739092) 
 - eHBA Personality: RAID Level Migration on Simplified R10 fails(SCGCQ01750316 port of SCGCQ01747188) 
 - READ CAPACITY 16) Is Working For All Values of SERVICE ACTION Field(SCGCQ01753395 port of SCGCQ01724697) 
 - F/W Hangs during reboot(SCGCQ01757394 port ofSCGCQ01616551 ) 
 - Improve Aero CPU Intensive Workload Efficiency(SCGCQ01772474 port of SCGCQ01698190) 
 - HII reports "The requested command has invalid arguments" when attempting to change controller personality(SCGCQ01772484 port of SCGCQ01715394) 
 - FW stated number of disks exceeded the max supported count with 14 PD(SCGCQ01776087 port of SCGCQ01680522) 
 - Unexpected enclosure events seen during physical intervention(SCGCQ01776327 port of SCGCQ01764132) 
 - Unmap R5/6: Implementation supporting new API and logic(SCGCQ01789236 port of SCGCQ01760871) 
 - Secured R1 VD is no longer shown as secured after an OCR(SCGCQ01791039 port of SCGCQ01765153) 
 - [iMR7.5][Bristol] Amber LED doesn't turn on with PD offline(SCGCQ01798257 port of SCGCQ01767172) 
 - StorCLI - Aero PA-0.6: Snapdump properties default values different after disabling and re-enabling its feature(SCGCQ01802451 port of SCGCQ01789798) 
 - HII allows setting controller personality through Manage Controller Profile menu(SCGCQ01809004 port of SCGCQ01685583) 
 - eHBA mode/Controller montasks/ocrs when pulling VD, inserting vd importing the vd and trying to delete it.(SCGCQ01809091 port of SCGCQ01787470) 
 - HII reports "The requested command has invalid arguments" when attempting to change controller personality(SCGCQ01813388 port of SCGCQ01715394) 
 - [UNMAP]: VMWARE 6.5 U1 requires VPD Page B1 support for UNMAP feature(SCGCQ01816730 port of SCGCQ01563349) 
 - Removed log message that was impacting customer(SCGCQ01828388 port of SCGCQ01828314) 
 - Set ldRestriction appropriately in MFCD parameters and persistent config pages(SCGCQ01864195 port of SCGCQ01487406) 
 - 530-8i- iMR Controller crashes during IO DMA operation(SCGCQ01880814 port of SCGCQ01830392) 
 - Same EID assigned to 2 530-8i controllers(SCGCQ01892544 port of SCGCQ01883096) 
 - CIT: Same EID assigned to 2 930-8i controllers(SCGCQ01892548 port of SCGCQ01830180) 
 - Exposing Write cache as disabled to host for a performance improvement(SCGCQ01901468 port of SCGCQ01845298) 
 - Same EID assigned to 2 530-8i controllers(SCGCQ01903444 port of SCGCQ01883096) 
 - Secure LD Creation with Dedicate Hot spare fails(SCGCQ01907189 port of SCGCQ01890955) 
 - ICMR1 With Storlibtest (OOB(SCGCQ01914261 port of SCGCQ01909345) 
 - iMR global fault LED does not get lit up during fail or UBAD(SCGCQ01915782 port of SCGCQ01877036) 
 - Ctrl fail to response when OCR occur during R6 reconstruction.(SCGCQ01917872 port of SCGCQ01686659) 
 - Unmap setting is not getting enabled with the new NVDATA(SCGCQ01919539 port of SCGCQ01818568) 
 - Forcing rebuild of multiple drives while activity is occurring can have data misdirected to the wrong drive and hit an assertion.(SCGCQ01920097 port of SCGCQ01849986) 
 - OCR/KA (if OCR is disabled(SCGCQ01968461 port of SCGCQ01940516) 
 - 9460-8i:"Other Error Count" of drives increase when running dd test(SCGCQ01969749 port of SCGCQ01943742) 
 - SLT hangs, when user tries to fetch information about the Bad SAS PD(SCGCQ01993273 port of SCGCQ01848463) 
 - MCTP: Fault 0x265D when packet with StartOfMsg is set and PktSeqCount is 1(SCGCQ01966451 port of SCGCQ01850721) 
 - [Ventura][PL] Applications trying to update NVMe device Firmware with Mode E fails.(SCGCQ01868160 port of SCGCQ01624790) 
 - Ventura MSS: Multi-bit ECC, EFI SAS DRIVER issue seen when performed multi reboot stress from UEFI(SCGCQ01822452 port of SCGCQ01794025) 
 - PL support for monitoring sanitize operation after controller/device reset.(SCGCQ01753176 port of SCGCQ01591995) 
 - PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0(SCGCQ01715880 port of SCGCQ01715509) 
 - (SATA Only(SCGCQ01668674 port of SCGCQ01638248) 
 - Change detect feature support on UBM supported back plane(SCGCQ01628416 port of SCGCQ01605371) 
 - (SATA Only(SCGCQ01621654 port of SCGCQ01593136) 
 - (SATA Only(SCGCQ01615216 port of SCGCQ01598756) 
 - Race condition can allow IOs over OOB to removed drive, with no host IOs, to not be cleaned up, and possibly leading to new(SCGCQ01605489 port of SCGCQ01400110) 
 - pl: NVMe: Write Long (10(SCGCQ01601702 port of SCGCQ01593652) 
 - pl: backend PCIe: potential address range overlap(SCGCQ01592870 port of SCGCQ01586393) 
 - PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path(SCGCQ01559005 port of SCGCQ01520524) 
 - IOP: FW to clear all pending PCI interrupts during a Function Level Reset (FLR(SCGCQ01534881 port of SCGCQ01523541) 
 - pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset(SCGCQ01527219 port of SCGCQ01526236) 
 - (SATA Only(SCGCQ01524638 port of SCGCQ01275335) 
 - pl: backend PCIe: 4311 fault with NVMe enabled(SCGCQ01520574 port of SCGCQ01514521) 
 - Cache data lost event seen for WT vds(SCGCQ01334347 port of SCGCQ01313607) 
 - Learn cycle shown as active when Learn cycle fails(SCGCQ01403968 port of SCGCQ01400807) 
 - Not all internal backplane drives are getting an enclosure ID when Insights are zoned to the controller(SCGCQ01567525 port of SCGCQ01538817) 
 - Not able to import foreign configuration when pinned cache is present(SCGCQ01568092 port of SCGCQ01539920) 
 - RMU reports NO_BATT Missing when checking battery status after jumper has been removed(SCGCQ01568394 port of SCGCQ01553947) 
 - VMware Passthrough Adapter does not sync time on VM power on(SCGCQ01595864 port of SCGCQ01592800) 
 - Kill Adapter while running IOs on 64 VDs (including slice VDs(SCGCQ01601287 port of SCGCQ01548019) 
 - AULBA divert bitmap not enabled on R5/R6 WT Vds(SCGCQ01627798 port of SCGCQ01619858) 
 - COL ONFI Single Image support was broken with onfiValidateCSCount changes(SCGCQ01679087 port of SCGCQ01675779) 
 - Firmware hangs during boot(SCGCQ01679094 port of SCGCQ01665148) 
 - Drives are reverted back to JBOD after perfoming instant secure erase(SCGCQ01683365 port of SCGCQ01615777) 
 - Data Corruption seen on NVME drives with Medium Errors(SCGCQ01714207 port of SCGCQ01665227) 
 - [iMR7.5] Memory allocation failure during RAID operation cycles under high loading(SCGCQ01727274 port of SCGCQ01697700) 
 - When patrol read completed with Talladega 9460-8i and MR7.5 components, the customer saw Patrol read complete events were(SCGCQ01746344 port of SCGCQ01732235) 
 - With a pending personality change, Global hot spares are allowed to be created and should be blocked.(SCGCQ01750314 port of SCGCQ01742187) 
 - REPORT LUNS Command is Not Failed for Unsupported "SELECT REPORT" Field(SCGCQ01753394 port of SCGCQ01719283) 
 - MR FW: Select SAS1/PDB1 BISR group by setting BisrSmsG = 0x0C in BISR Control register during Initial Power Up.(SCGCQ01762272 port of SCGCQ01614205) 
 - [Bristrol] [MR7.4] "Previous Configuration missing" occurs during reboot test with CC running(SCGCQ01765212 port of SCGCQ01697887) 
 - Allow user to force switching mode when configuration is present(SCGCQ01772483 port of SCGCQ01732059) 
 - CLI is not failing "set personality behavior=None/JBOD"(SCGCQ01776335 port of SCGCQ01764921) 
 - fixed exception at medium error recovery caused by a bad drive.(SCGCQ01826256 port of SCGCQ01807457) 
 - Increase the recon BB list entries to align with BBM MAX BAD entries(SCGCQ01851104 port of SCGCQ01623254) 
 - Line 535 in ../../raid/cachePreserve.c for trying to create Pinned Cache by Cable Pull.(SCGCQ01878338 port of SCGCQ01839662) 
 - Error restoring offloaded (single image controller(SCGCQ01885343 port of SCGCQ01826923) 
 - Legacy BIOS Prints "This firmware is a TEST version"(SCGCQ01901447 port of SCGCQ01825992) 
 - Only Detect 63 Drives in Mix mode enviroment (Total 64 PDs in the system(SCGCQ01917261 port of SCGCQ01885194) 
 - Reconstruction R1 to R5 by adding a pd found a drive of R1 became unconfig bad(SCGCQ01919532 port of SCGCQ01819285) 
 - FW hit "failed element size check !! ... tail pointer 65535 exceeds max 255" while OCR and rebuilding in loop(SCGCQ01920090 port of SCGCQ01886840) 
 - Secure LD Creation with Dedicate Hot spare fails(SCGCQ01929133 port of SCGCQ01890955) 
 - MR_7.8:Driver unload and leave the system overnight, result to Assertion(SCGCQ01949646 port of SCGCQ01889482) 
 - log dump all command not working on Ventura controllers(SCGCQ01978876 port of SCGCQ01937037) 
 - Ventura PL: Check in Revised Workaround for 0x5842 fault - Rx Dma Memory Overflow(SCGCQ01967432 port of SCGCQ01864843) 
 - vSES: Remove, RRAbort and Missing bits in array device element are not getting updated in element status page.(SCGCQ01967385 port of SCGCQ01932394) 
 - [vSES] Vendor ID and Product ID of Configuration diagnostic page uses hardcoded values.(SCGCQ01906460 port of SCGCQ01906013) 
 -(SCGCQ01748041 port of SCGCQ01615484) 
 - (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command.(SCGCQ01714280 port of SCGCQ01681441) 
 - PL: (SATA Only)SSU Command for active power condition transition on EPC enabled drive fails with Additional sense Logical block address out of range(SCGCQ01640974 port of SCGCQ01640762) 
 - pl: NVMe: unexpected target reset task management timeout(SCGCQ01587064 port of SCGCQ01580026) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01530305 port of SCGCQ01450475) 
 - Intermittent: On iMR_Invader & cascaded Enclosures, after power off the enclosure, FW holds the PD info and apps display PDs(SCGCQ01503911 port of SCGCQ01483727) 
 - Enable and implement missing interrupts in the PCE core(SCGCQ01596697 port of SCGCQ01537812) 
 - DISM - Assertion failure in ../../dm/src/devRemoval.c for breaking multipath during bootup(SCGCQ01635256 port of SCGCQ01618628) 
 - FW can lose AltSel and DrvStrength(SCGCQ01679098 port of SCGCQ01635796) 
 - Too many Unexpected Sense : "1/0/1d " logged for SATA drives(SCGCQ01722276 port of SCGCQ01714261) 
 - Cisco - CSCvh78916 - Copyback to GHS/DHS target drives returns inappropriate error message in some invalid scenarios(SCGCQ01731365 port of SCGCQ01590213) 
 - Event with invalid slot # during pd insertion when a command is timed out(SCGCQ01732411 port of SCGCQ01721492) 
 - Unable to see the Background progress tab in LSA while Patrol read operation is running(SCGCQ01753392 port of SCGCQ01676417) 
 - FW crash observed while reinserting drives part of TR drive group after reboot(SCGCQ01763188 port of SCGCQ01763071) 
 - SBR version is not shown in the cli show all output in eHBA mode(SCGCQ01763492 port of SCGCQ01729855) 
 - Attempting to secure a 3rd party locked SED EPD fails but applications report success.(SCGCQ01763496 port of SCGCQ01747590) 
 - 3108 firmware reports Unexpected Sense Error" LBA Out of Range when running Sg util(SCGCQ01763951 port of SCGCQ01749090) 
 - No profile reported when a bad (0-byte(SCGCQ01914532 port of SCGCQ01897779) 
 - Assertion is hit during region lock release due to inconsistent region lock promotion related variables(SCGCQ01915567 port of SCGCQ01863948) 
 - Eliminate a storm of AR deletion activity with max-configuration when ten enclosures are shut off(SCGCQ01920037 port of SCGCQ01841657) 
 - Secure erase on JBOD drives using hdparam is failing sporadically(SCGCQ01929056 port of SCGCQ01904220) 
 - Issue: MR FW asserted after copyback completed and the source drive was removed.(SCGCQ01940107 port of SCGCQ01921307) 
 - Error LED cannot stay long when drive pulled from VD.(SCGCQ01944350 port of SCGCQ01882216) 
 - (SATA Only(SCGCQ01731910 port of SCGCQ01638248) 
 - FW logging fatal error in case of chip reset, but driver not loaded.(SCGCQ01623751 port of SCGCQ01594199) 
 - Incorrect event message when CC is suspended after processing uncorrectable media errors.(SCGCQ01683352 port of SCGCQ01579614) 
 - Reduce bootup time by 15-20 seconds(SCGCQ01892778 port of SCGCQ01735563) 
 - The SUT can’t boot to OS after 159 loops AC cycle and check the Raid 930-16i 8G(SCGCQ01902777 port of SCGCQ01788479) 
 - 530-8i- iMR Controller crashes during IO DMA operation(SCGCQ01911311 port of SCGCQ01830392) 
 - Firmware ASSERT(SCGCQ01911892 port of SCGCQ01729837) 
 - Forcing rebuild of multiple drives while activity is occurring can have data misdirected to the wrong drive and hit an assertion.(SCGCQ01912487 port of SCGCQ01849986) 
 - When checking the config sequence number mismatch, need to cover system PDs.(SCGCQ01914298 port of SCGCQ01871037) 
 - Critical Message " maximum supported count of 256 disks" received with MaX PDs(SCGCQ01918227 port of SCGCQ01884237) 
 - CSCvm32376 - Fatal firmware error: Line 120 in ../../raid/utils.c(SCGCQ01919551 port of SCGCQ01895764) 
 - MR_7.8: Fail to perform OCR , after FW upgrade from MR 7.7 to 7.8(SCGCQ01936411 port of SCGCQ01823917) 
 - With the IMR controller IOMMU fault is observed with the latest driver allow both RDPQ array or linear array.(SCGCQ01942615 port of SCGCQ01928086) 
 - Fix Alignment of ENCL_INFO struct members in 7.8(SCGCQ01945684 port of SCGCQ01905512) 
 - foreign import failed when sequence number mismatch(SCGCQ01968758 port of SCGCQ01912560) 
 - Aero PA0.5: FW fails to create VD in Profile 12 when you have 208 VD's and you delete 16 VD's and try to create 16 more VD's(SCGCQ01787902 port of SCGCQ01761452) 
 - 9440-8i / 9460-16i cards BCA_S LED state doesn't match with BCA-S LED Behavior Rule.(SCGCQ01902766 port of SCGCQ01832279) 
 - limit target queue depth not greater than controller queue depth(SCGCQ01920041 port of SCGCQ01841594) 
 - Cannot be done initialize even if execute Full Initialize by using StorCli(SCGCQ01968776 port of SCGCQ01938067) 
 - DC observed on one of the R1 VD, after degrading the R1 DG(SCGCQ01714692 port of SCGCQ01676617) 
 - LSA version 4.132 shows blank page or extreme sluggish to do anything(SCGCQ01715426 port of SCGCQ01698418) 
 - BMC emulator does not load storelibTest(SCGCQ01849642 port of SCGCQ01762267) 
 - Investigate on unalligned IO's for 512E drives with background operation(SCGCQ01866862 port of SCGCQ01181178) 
 - Aero BST failure, Raid LD tgtId does not persist through OCR(SCGCQ01873049 port of SCGCQ01857416) 
 - CIT: Same EID assigned to 2 930-8i controllers(SCGCQ01902802 port of SCGCQ01830180) 
 - Check NULL pointer in display function called by snapdump to avoid data abor exception(SCGCQ01914622 port of SCGCQ01892152) 
 - DDF corruption after hibernation because of incorrect virtual address mappings(SCGCQ01916718 port of SCGCQ01877879) 
 - MR7.7: FW hit Assertion failure in fw\raid\mpthostcmd.c at line 1951: DMGetSpanFromDevhandle(pMpt->DevHandle(SCGCQ01917260 port of SCGCQ01763331) 
 - Handle missing changes of CSET(SCGCQ01318495(SCGCQ01919498 port of SCGCQ01904051) 
 - copyback fail to start on some PDs(SCGCQ01919504 port of SCGCQ01839637) 
 - Aero PA0.7: FW breaks into montask with exceptional core handling error(SCGCQ01919585 port of SCGCQ01850596) 
 - On ESXi6.7U1 OS, With the IMR controller IOMMU fault is observed with the latest driver(SCGCQ01929982 port of SCGCQ01893479) 
 - host issued UNMAP cmd not handled properly when VD is offline(SCGCQ01940967 port of SCGCQ01920370) 
 - MR7.8 OEM: WT VD created on attempt to create WB VD(SCGCQ01942129 port of SCGCQ01916098) 
 - MR7.8 PA2: Security property is always shown false for a DG when Secured VD is created via LSA in SLES 15(SCGCQ01942543 port of SCGCQ01848923) 
 - MR_7.8: During system reboot IMR card logged an event "log discontinuity due to buffer full"(SCGCQ01978900 port of SCGCQ01872802) 
 - Kill Adapter while running IOs on 64 VDs (including slice VDs(SCGCQ01601265 port of SCGCQ01548019) 
 - MR7.8: While doing SED JBOD drive pull on iMR, FW hit Assertion failure in fw\dm\pl3.5\pliopi.c at line 1164: 0(SCGCQ01915852 port of SCGCQ01876358) 
 - Aero PA0.6: FW "Assertion failure in fw\raid\mon.c at line 650: 0" encountered when 2 R5 VDs go offline(SCGCQ01917259 port of SCGCQ01816635) 
 - Heavy MFI based LD IO writes during POST causing WJ entries exhaust on iMR and FW asserting(SCGCQ01942509 port of SCGCQ01930815) 
 - Fw hit drvspinup.c when wake up from hibernation(SCGCQ01948887 port of SCGCQ01912208) 
 - undo previous fix; previous fix introduces undesirable side effects(SCGCQ01966532 port of SCGCQ01932051) 
 - Data Abort Exception on abrupt powerloss/reset when flushing events from NVRAM hold buffer to flash(SCGCQ01996623 port of SCGCQ01973389) 

EnhancementRequests:
 - Add MR API bit to indicate the profile is NVMe Only profile(SCGCQ01216848) 
 - SATA SMR Only : Change for the FORMAT UNIT translation for SMR drives to also call RESET WRITE POINTER with ALL bit set(SCGCQ01218300) 
 - New events for PR/CC conflicts and sector size mismatch(SCGCQ01227051) 
 - Add Aero workaround matrix(SCGCQ01376462) 
 - Add Aero custom file(SCGCQ01376466) 
 - Add PLI Control Request to Fully Pause/Unpause FPE HW(SCGCQ01378809) 
 - Aero-3: CR#06: SPILib: Add necessary SPI timings to Aero/Sea to support multiple SPI Vendors(SCGCQ01380051) 
 - Aero-3: Update Clock, Configuration, and Reset (CCR(SCGCQ01380109) 
 - perform SED reauthentication if secured PD is managed by FW when DMD occurred(SCGCQ01403487) 
 - Incorporate new PHY register initialization settings.(SCGCQ01405307) 
 - Aero DDR: PHY based Read Leveling(SCGCQ01405427) 
 - Aero DDR: PHY based Write Leveling(SCGCQ01405430) 
 - Aero: Internal Boot ROM Support(SCGCQ01410019) 
 - Aero:Add Pocono support to Aero(SCGCQ01412204) 
 - Add Aero checkword(SCGCQ01427566) 
 - Add Test Link Diagnostic API(SCGCQ01436268) 
 - Merge RMW IOPs Performance POC into Aero Stream(SCGCQ01437148) 
 - pl: backend PCIe: add API for getting backend PCIe link configurations(SCGCQ01437182) 
 - Add MSS reset back to Aero(SCGCQ01444943) 
 - Re-enable flash initialization in bootloader.(SCGCQ01448314) 
 - Provide OEMs ability to select either I2C or PCIe as an out of band transport(SCGCQ01450245) 
 - (SATA Only(SCGCQ01452113) 
 - Add method to determine Ring Buffer Overflow in RMC.(SCGCQ01458368) 
 - Disable break/join mirror(SCGCQ01464239) 
 - Block RLM(SCGCQ01464241) 
 - Aero simplification (PA-0.2(SCGCQ01464242) 
 - Cache Policy VD Parameter Changes(SCGCQ01465089) 
 - Aero simplification (PA-0.5(SCGCQ01465430) 
 - MegaRaid VT BootLoader Flash Map Update For Ventura(SCGCQ01467197) 
 - TGC Opal Support(SCGCQ01472524) 
 - New command issued from StorCliF to test PHYs during Manufacturing only.(SCGCQ01473896) 
 - Move flash code region alias(SCGCQ01494503) 
 - opal drive support(SCGCQ01498086) 
 - Aero-3: Create framework for M0 processors(SCGCQ01499419) 
 - Add support for mr build to get bin using fromelf(SCGCQ01501207) 
 - Ability for UEFI/HII to log debug messages to UART(SCGCQ01501987) 
 - SAS3.5 (SATA Only(SCGCQ01503732) 
 - Need version info in binary(SCGCQ01504281) 
 - Rebase Aero3 Development Stream and Verify Ventura Functionality(SCGCQ01509806) 
 - Ventura: Add MCTP over I2C Master Mode Option that doesn't use I2C DMA(SCGCQ01516871) 
 - Limit scope of supported drives (SAS/SATA(SCGCQ01517627) 
 - FW OCR debug mechanism(SCGCQ01520445) 
 - MR 7.6: Opal: Use Locking SP to read and write key info from Scratch Pad (DataStore(SCGCQ01521540) 
 - Enable Backplane Management based on backplane type signal per HBA connector quad(SCGCQ01524982) 
 - Evaluate usage of IEEE SGL pool for holding PRP list in the buffered PRP path(SCGCQ01525817) 
 - pl: NVMe: add NVMe task management test code(SCGCQ01526049) 
 - Handle PRP creation in RMW_CTIO path for IOLength more than 20KB(SCGCQ01529120) 
 - Increase SRAM_Fixed IOPATH Code Size(SCGCQ01529611) 
 - Ventura: Specify leading zeros for the prints using %x in pl diag module(SCGCQ01533485) 
 - Aero-3: Update RMC FW to follow the steps from Aero SOC uArch spec(SCGCQ01533491) 
 - Enable and implement missing interrupts in the PCE core(SCGCQ01537812) 
 - Evaluate GPIO usage from NVData in FW(SCGCQ01538673) 
 - Add ApSHA hardware header(SCGCQ01538919) 
 - Add a new flag to IoFlags in pliStartScsiIo(SCGCQ01544740) 
 - Ventura: Ensure new I2C non_DMA code compiles with MCTP disabled(SCGCQ01548925) 
 - Remove ENET(Ethernet support Bit 26(SCGCQ01555034) 
 - [UNMAP] 7.6 : SSD's which doesn't support UNMAP gets kicked in as GHS/EGHS even if there are UNMAP supported drives(SCGCQ01556699) 
 - Changes to Core 1 boot sequence(SCGCQ01557091) 
 - Vision Support for downloading firmware image(SCGCQ01558118) 
 - Remove CSW library from AERO builds(SCGCQ01558186) 
 - Compress Debug Data and store to DRAM persistent AREA(SCGCQ01558509) 
 - Cache offload/Restore changes to preserve data across OCR, Power cycle(SCGCQ01558545) 
 - Different SED type mix in an array(SCGCQ01558907) 
 - DDR version of Firmware Renamed Signals and GPIOs(SCGCQ01561073) 
 - Create additional build target(SCGCQ01564859) 
 - Assert triggers snapdump(SCGCQ01565492) 
 - Change the default behavior for I2C MCTP to non-DMA(SCGCQ01565737) 
 - ALADIN cold boot support for Ventura(SCGCQ01566074) 
 - Intruder: Modify NVDATA to enable DMA by default(SCGCQ01566619) 
 - Add slave bypass support(SCGCQ01567489) 
 - Implement Snapdump debugging capability(SCGCQ01567770) 
 - Add capability to report to Host Software Application the Drive SED Type(SCGCQ01570280) 
 - Add new parameter in NVDATA to enable/disable mix of Opal & Enterprise SED drives in security enabled array(SCGCQ01570611) 
 - Add Aero FW secret(SCGCQ01571726) 
 - Disable licensing backdoors(SCGCQ01571783) 
 - Add make support(SCGCQ01572146) 
 - Add multithreaded elftobin(SCGCQ01572366) 
 - Update build to calculate build duration(SCGCQ01572912) 
 - De-tune RMW CTIO Enhancements for Non-Aero (3916(SCGCQ01573051) 
 - Debug integration across modules(SCGCQ01573078) 
 - BIOS Handshake breaks Manufacturing Environment, need change in TTY and/or add timeout in FW for BIOS Handshake(SCGCQ01575182) 
 - Ventura: Specify leading zeros for the prints using %x in plDebugStrings(SCGCQ01576200) 
 - Add support to detect drive with TCG Opalite or TCG Pyrite capable and convert it to non-SED drive(SCGCQ01576988) 
 - MR7.8: Multiple snapdump support(SCGCQ01579214) 
 - Extend debug framework to capture failures that doesn't involve a FW crash(SCGCQ01579219) 
 - Add support to defeature Cached I/O policy(SCGCQ01581032) 
 - pl: NVMe: add support for Security Protocol In/Out INC_512 flag(SCGCQ01582520) 
 - Disable mapping of some device side PCIe hardware into CPU's virtual address space(SCGCQ01582599) 
 - DC Debug Framework (NvMe(SCGCQ01583215) 
 - Add support for API fields to report SED type of PD(SCGCQ01587230) 
 - Enhance mptDirectLoopback for taskadd based to timer based.(SCGCQ01587438) 
 - Add critical boot messages for OCM ECC errors(SCGCQ01592807) 
 - Add OnOff parameter in Properties2 of Structure MR_CTRL_PROP to enable/disable mix of Enterprise & Opal SED drives(SCGCQ01593520) 
 - MR API change request to Enable/disable the parallel PD FW update feature based on PNP ID’s(SCGCQ01595347) 
 - Debugging infrastructure to detect dynamic memory Memory Corruption And Memory Leaks(SCGCQ01595603) 
 - Aero-3: Modify CBB build so that it decreases the hardware reserved area (SBR(SCGCQ01595798) 
 - New configuration params added for EPD-PT devices(SCGCQ01599607) 
 - Separate Aero and Ventura builds(SCGCQ01600799) 
 - Add basic version information for Vision(SCGCQ01601700) 
 - Update DDR version FW according to Aero SuperCap management(SCGCQ01602431) 
 - NVDATA parameter to OPAL SED(SCGCQ01607938) 
 - [MR 7.7] UNMAP/TRIM/WRITESAME for EPDs in JBOD personality & JBODs in RAID personality(SCGCQ01608027) 
 - RMC must add PCE PLL/Core Initialization for Secure Mode(SCGCQ01608224) 
 - Enable Support for VSES Interface and device enumeration behind PCIe switch in MR FW(SCGCQ01614212) 
 - Aero-3: Review Aero Impala changes(SCGCQ01614623) 
 - Aero: backend PCIe: update config pages for 16GT/s(SCGCQ01614647) 
 - 7.5 R1 performance change request.(SCGCQ01614688) 
 - NVDATA parameter to OPAL SED(SCGCQ01614689) 
 - Add new files to build scripts(SCGCQ01615521) 
 - Flag added in AERO to avoid sending IO requests to IOA NVMe core that could potentially cause exceptions(SCGCQ01615545) 
 - Set feature simplification(SCGCQ01616881) 
 - Remote Flash utility for Avenger.(SCGCQ01618931) 
 - Aero: enable backend PCIe support in the Aero build(SCGCQ01619936) 
 - Added a new interface between driver-aops to indicate if 64 bit SGL support is enabled(SCGCQ01620350) 
 - Modify event string APIs for MISSING and OFFLINE LDs(SCGCQ01628177) 
 - pl: backend PCIe: basic PCI hot plug power controller support for switches(SCGCQ01633888) 
 - Aero DDR: DDR library initialization on the FPGA(SCGCQ01634738) 
 - Enable Profile 14, 24 NVMe drive support for 3516 based design(SCGCQ01634874) 
 - Remove SERIES_3108 from mptDirectFuncs.c(SCGCQ01635731) 
 - Aero simplification (PA-0.5(SCGCQ01638223) 
 - pl: NVMe: remove vendor specific prototype code(SCGCQ01638257) 
 - Add new MFI Status to block requested operation due to existing controller configuration(SCGCQ01670135) 
 - Change the mr.h API comment showing the new return status for the - MR_DCMD_PD_GET_INFO(SCGCQ01670234) 
 - pl: NVMe: support for nonzero doorbell stride(SCGCQ01670300) 
 - Re-tune RMW CTIO Enhancements for F_AERO_ON_VENT Builds(SCGCQ01675552) 
 - 7.7 Manage SGPIO through VSES only if PCI switch is detected(SCGCQ01676604) 
 - Enable Profile 14, 24 NVMe drive support for 3508 based design(SCGCQ01676990) 
 - SPI_LIBRARY: Aero/Ventura Provide Sufficient Information to Uniquely Detect Auto-Configured devices(SCGCQ01679097) 
 - API change for Switch attached NVMe HW RAID support for Supermicro backplanes(SCGCQ01697667) 
 - Storcli Output after Vision PSOC FW update, Change to power cycle instead of reboot(SCGCQ01698424) 
 - Create sanitize events(SCGCQ01713708) 
 - Improve build times(SCGCQ01715410) 
 - Fine Tune iMR RAID IO path performance(SCGCQ01715637) 
 - Add debug print for unrecognized initial FIS(SCGCQ01718317) 
 - Permit multiple calls to avSerdesSASSDAddTxEqSeq and implement aviSerdesSASSDWaitIntrSmIdle for SAS35XFW(SCGCQ01720492) 
 - Honor the RAID key disk count and modify the profile information so it gets displayed accurately.(SCGCQ01727239) 
 - API changes needed to support eHBA product series(SCGCQ01727346) 
 - Aero: Move RSA defines in mpi_temp.h to a common area(SCGCQ01727399) 
 - MR FW change to support API change of new enclosure subtype for switch attached NVMe backplanes(SCGCQ01729976) 
 - RTTrace API Changes(SCGCQ01745568) 
 - FW changes for mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled.(SCGCQ01750328) 
 - Mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled.(SCGCQ01757538) 
 - Unmap: Define new API for enhanced UNMAP support(SCGCQ01758062) 
 - Criteo: API changes reversal(SCGCQ01760512) 
 - Unmap R5/6: Implementation supporting new API and logic(SCGCQ01760871) 
 - ComboSerdes: add APIs for firmware coordination with the protocol cycler(SCGCQ01761386) 
 - Adding API bit to indicate whether forced personality change is supported or not.(SCGCQ01762153) 
 - API Changes - After Vision PSOC FW update, applications should ask the user for power cycle instead of reboot(SCGCQ01765150) 
 - COL PRIV API changes(SCGCQ01765281) 
 - Support added to create simulated physical or virtual drive(SCGCQ01778289) 
 - Unmap R5/6: implement latest LD unmap policy, etc.(SCGCQ01789796) 
 - Including The Time Stamp for every Snap Dump created in the firmware.(SCGCQ01797424) 
 - Unmap: Define new events for enhanced UNMAP support [MR7.8](SCGCQ01803319) 
 - Unmap R5/6: Implementing new events for enhanced unmap support(SCGCQ01809217) 
 - Deprecate the snap dump fields that are no longer needed for MR_SNAP_DUMP_PROPERTIES structure(SCGCQ01816724) 
 - Exposing Write cache as disabled to host for a performance improvement(SCGCQ01845298) 
 - Tune DDR settings for OEM's custom design(SCGCQ01898339) 
 - Enable DDR debug reads(SCGCQ01321760) 
 - Warning removal 111(SCGCQ01346729) 
 - MR_FW_BLD_TOOLS: Add output file switch to RomEnv(SCGCQ01347456) 
 - Convert Aero build to Aero3(SCGCQ01349949) 
 - Aero: Design and Develop DDR Training Failure Debug infrastructure.(SCGCQ01367005) 
 - Aero Fpga support(SCGCQ01367141) 
 - Warning removal 1215(SCGCQ01389575) 
 - Initial release build support(SCGCQ01392130) 
 - Aero-3: Update ARM CPU Speed to 1600 MHz(SCGCQ01392205) 
 - Aero: Add 300MHZ UART Clock Reference Support(SCGCQ01392831) 
 - Release script changes for PA 1(SCGCQ01393659) 
 - Aero3: Add secure boot specified header and add support in rom utilities for it(SCGCQ01399079) 
 - Define an API for getting PDB HW configurations(SCGCQ01407350) 
 -(SCGCQ01418823) 
 - Implement Dynamic Flash Size - use the flash pagesize and blocksize.(SCGCQ01458603) 
 - Provide API changes to let driver know of EPD volumes and flags to take better decision on MDTS(SCGCQ01459293) 
 - Update PL version check(SCGCQ01464907) 
 - Offload division to driver(SCGCQ01470712) 
 - DC Debug Framework(SCGCQ01473145) 
 - Improving SAS bus test coverage by checking PHY error count when linking at 12G speed using a SAS loopback.(SCGCQ01473898) 
 - Review Ventura MCTP workarounds(SCGCQ01484422) 
 - PL: Create defines for plRequestFWBreak((SCGCQ01499053) 
 - Change pceDumpRateInfo to support Gen4 Speed(SCGCQ01501529) 
 - Add parsing of real time info for RMC logging(SCGCQ01507161) 
 - Disable PCIe switch support in 7.6(SCGCQ01508256) 
 - Aero-3: Ensure modifed SBR template data is compatible with Ventura(SCGCQ01509915) 
 - Support for NVDATA control of static slot number assignments for x2 or x4 NVMe devices(SCGCQ01511787) 
 - Ventura: Use non-DMA option for MCTP over I2C - Slave Mode(SCGCQ01516865) 
 - MR 7.6: Opal: Add Revert TPer (Device(SCGCQ01518205) 
 - Ventura: Add symbol names to "iop show gic"(SCGCQ01519283) 
 - Remove inc flags from the via file(SCGCQ01521426) 
 - Add OCE support bit(SCGCQ01524705) 
 - FPGA Build Support(SCGCQ01525486) 
 - Get Random number from OPAL drive(SCGCQ01526167) 
 - OCM hardware header(SCGCQ01530394) 
 - Add OCM ECC scrub support(SCGCQ01531858) 
 - Added MR_MFC_DEFAULTS.NVMeAbortTO and MR_MFC_DEFAULTS.NVMeMaxControllerResetTO(SCGCQ01532045) 
 - PCIe Switch attached NVMe Backplane LED Management support(SCGCQ01532296) 
 - Aero R5 RMW CTIO IOPs Performance POC Part 2(SCGCQ01534468) 
 - Add TRNG hardware header(SCGCQ01537996) 
 - SRK hardware header(SCGCQ01538683) 
 - NVME Task Management Change 3.(SCGCQ01538729) 
 - Disable support for UNMAP on SATA drives due to unavailability of ZEROEXT (TRIM=1(SCGCQ01552670) 
 - Add I2C header changes(SCGCQ01553011) 
 - Update FC Div handling(SCGCQ01556172) 
 - Add handling for CCR_RST_DEBUG_CNTRS(SCGCQ01558173) 
 - Vendor Semi APIs(SCGCQ01558218) 
 - Support for collection of ARM instruction trace(SCGCQ01565490) 
 - Add Margay expander recognition to Ventura(SCGCQ01570647) 
 - ARM PMU Sampling framework(SCGCQ01571034) 
 - Support NVData control of static mapping for slot numbers of x2 or x4 devices (or x2 or x4 plumbing(SCGCQ01574963) 
 - Allow filtering of NVMe exception prints in debug mask(SCGCQ01575138) 
 - Make the new NVME Write Uncorrectable cmd working fully for future MR 7.x release.(SCGCQ01580013) 
 - iMR IO path adjustment(SCGCQ01588780) 
 -(SCGCQ01598929) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_7.0 - 06.250.04.00 MR PL-SCS Libs from new PL source stream(SCGCQ01599753) 
 - pl: NVMe: more NVMe TM test code(SCGCQ01605900) 
 - pl: backend PCIe: merge extended capability search functions(SCGCQ01613997) 
 - PL SATL: ZNR bit translation during SCSI SANITIZE command for SMR drive(SCGCQ01615513) 
 - Delete strings that are not used in plDebugStrings(SCGCQ01620668) 
 - Support more than 16Mb transfer with SysDma(SCGCQ01623953) 
 - Update file headers with Broadcom copyright(SCGCQ01631051) 
 - Suppress license warnings(SCGCQ01641063) 
 - Add FW support for MPI Comp Img (SB(SCGCQ01685811) 
 - Improve Aero CPU Intensive Workload Efficiency(SCGCQ01698190) 
 - Verify that the Statistics from 57 Pages of NAND Parameters can be read.(SCGCQ01735503) 
 - Reduce bootup time by 15-20 seconds(SCGCQ01735563) 
 - Aero: backend PCIe: basic Atlas host interface board bringup(SCGCQ01736527) 
 - Improve NVRAM performance(SCGCQ01750319) 
 - Enable ONFI Dual COL Image support for OEM(SCGCQ01753457) 
 - MR FW Aero uses RMC GPIO to enable Battery on SOD in RMC. Exclude Battery Enable changes for specifc OEM in MR FW.(SCGCQ01753459) 
 - Aero PA0.5: Handling false BIOS message logging in Jbod personality(SCGCQ01757480) 
 - OOB Auto DevBST(SCGCQ01763421) 
 - Unmap R5/6: Firmware downgrade scenario(SCGCQ01765607) 
 - Incorporate the changes needed by PL to NVDATA(SCGCQ01790860) 
 - Add support for Gas Gauge parts "sn33100"(SCGCQ01818346) 
 - Read-only TLB support(SCGCQ01315602) 
 - MR_FW_BLD_TOOLS: Update to sas2parser version 10.05.00.00(SCGCQ01347713) 
 - Ventura/Marlin: Detect attempt to downgrade from auto-detected SPI parts to non-auto and fail(SCGCQ01449329) 
 - Add User0 support to Main FW(SCGCQ01453208) 
 - PL: Use Sense Data from SATA Log Page 10 when querying Log Page 10(SCGCQ01459375) 
 - AERO Debug Framework Enhancements - Basic Framework(SCGCQ01473143) 
 - Safe Mode instead of early boot crash(SCGCQ01473148) 
 - Gas Gauge Code Cleanup(SCGCQ01482377) 
 - Aero: backend PCIe: modify outbound address window configuration(SCGCQ01485166) 
 - Opal Drive support(SCGCQ01487401) 
 - Add CHECKED_ASSERT for Detecting RMC Watchdog Occurrences from MR(SCGCQ01501362) 
 - NVME : Task Management Part II(SCGCQ01517088) 
 - 7.6 NVDATA change for ManPage11 NVMeAbortTO(SCGCQ01525177) 
 - Add OCM Correctable ECC error injection(SCGCQ01531845) 
 - Add OCM uncorrectable ECC error injection(SCGCQ01531847) 
 - Ventura: Modify DMAless-I2C MCTP code so that that it processes most data in interrupts(SCGCQ01533036) 
 - Update CCR header(SCGCQ01553014) 
 - Add latest CCR headers(SCGCQ01553034) 
 - Add developer library builds(SCGCQ01553099) 
 - Check BISR register changes(SCGCQ01556842) 
 - Changes to CCR_AVSO_EFUSE_READ_CONTROL(SCGCQ01556978) 
 - Snapdump API implementation(SCGCQ01561812) 
 - [UNMAP]: VMWARE 6.5 U1 requires VPD Page B1 support for UNMAP feature(SCGCQ01563349) 
 - Update Aero UART dividers properly(SCGCQ01566425) 
 - Add a temp parameter to elftobin(SCGCQ01572361) 
 - Update tcc to version 0.9.27(SCGCQ01593619) 
 - Remove NVRAM intercore for 3916(SCGCQ01602518) 
 - Integrate SAS3.5CtrlFw_Ventura_Ph_7.0 - 06.250.05.00 PL-SCS Libs(SCGCQ01607923) 
 - PL: Add NVDATA Option to Force Programmed Physical Link Rates to 0 in SMP Phy Control Request(SCGCQ01614814) 
 - VSES support for Direct Attached SGPIO backplane in JBOD personality.(SCGCQ01631254) 
 - MR 7.8 To incorporate SPI Library for IP Phase 9 to ensure multiple support for Winbond and ISSI at Aero GA(SCGCQ01665204) 
 - Ventura/Aero: (Child(SCGCQ01680542) 
 - Unmap R5/6: Changes related to rebuild/copyback/recon(SCGCQ01748174) 
 - Testability improvement for Cache Offload (COL(SCGCQ01753258) 
 - The SUT can’t boot to OS after 159 loops AC cycle and check the Raid 930-16i 8G(SCGCQ01788479) 
 - Persisting FW crash code for reporting through boot message for Shenandoah(SCGCQ01793712) 
 - Add multi Snapdump files transfer support from FW to Debug terminal through Zmodem(SCGCQ01802450) 
 - Opal Drive support in MR FW(SCGCQ01471518) 
 - Preboot OCR(SCGCQ01473151) 
 - Add method to determine Ring Buffer Overflow in RMC(SCGCQ01484941) 
 - Port OEM feature (Transport Ready(SCGCQ01507036) 
 - To implement the CHANGE_DETECT GPIO feature for the UBM backplanes(SCGCQ01507506) 
 - Aero-3: Modify the Aero3 build so that the main firmware image has a MPI Component Header(SCGCQ01509807) 
 - Request Mem32 resources from host(SCGCQ01523291) 
 - 7.6 NVDATA change for NVMeAbortTO in MrParamsPage0, and correct MrParamsPage0 XSD mapping.(SCGCQ01531782) 
 - Aero-3: Disable MCTP over PCIe VDM Workarounds(SCGCQ01533532) 
 - Ventura: Detect various user errors in firmware download(SCGCQ01534545) 
 - Add debug dump of memory locations when COL timeouts occur(SCGCQ01542428) 
 - aero3pce changes(SCGCQ01553134) 
 - Update RMC ring buffer parser with new timeout ID(SCGCQ01558231) 
 - Add MR_CTRL_INFO Bits to Differentiate Between Aero and Ventura FWs(SCGCQ01614207) 
 - Aero R5 RMW CTIO IOPs Performance Enhancements Part 3(SCGCQ01697664) 
 - Establish Aero build environment(SCGCQ01310265) 
 - Add all build variants to the build script(SCGCQ01349766) 
 - NVMe switch support(SCGCQ01471539) 
 - Use user1 in reset status register to indicate error state during offload sequence(SCGCQ01482387) 
 - Remove NVMe specific #defines(SCGCQ01501664) 
 - Fault LED behavior is not consistent between PD direct attached vs connected via expander(SCGCQ01508065) 
 - Move NVMe PRP specific code to a new file(SCGCQ01508197) 
 - Add zmodem support in the firmware(SCGCQ01527220) 
 - FW change for NVME API change.(SCGCQ01558166) 
 - SnapDump retrieval by user using a FW API(SCGCQ01558528) 
 - RMC manages EPAK_ENABLE(SCGCQ01561151) 
 - Add Aero XSD files including the MR defined config pages.(SCGCQ01641053) 
 - Man page 7 X2/X4 Slot overlap issue and fix(SCGCQ01675800) 
 - Ventura Debug Framework Enhancements Continuation Work(SCGCQ01680501) 
 - StorCLI/LSA show OEM NVMe switch with 32 slots instead of 12/24 physical slots(SCGCQ01683203) 
 - Update code identifiers to Broadcom(SCGCQ01733136) 
 - Implement module specific data dumps on ASSERT (using snapdump(SCGCQ01742061) 
 - MR FW return only compatible profiles(SCGCQ01789037) 
 - new FW and MegaMon interface to trigger SAS/SATA/NVME Analyzer(SCGCQ01817677) 
 - Do not discard the snap-dump on retrieval. Also include the time stamps during snap dump retrieval.(SCGCQ01822399) 
 - Change the order of DDF header updates when there are errors existing in DDF headers currently on the drive(SCGCQ01487403) 
 - Add uncorrectable DDR ECC error injection(SCGCQ01531838) 
 - Unmap/write-same(unmap=1,NDOD=1(SCGCQ01583563) 
 - Removing the unwanted debug prints(SCGCQ01896349) 


Version 50.5.0-1678 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:  7.05.02.2
	UEFI Driver: 0x07050404
	HII:   07.05.06.07
	MR FW: 5.050.00-1638
    package 50.5.0-1678
	
Defects (13)
- Fix compilation error in MR Pvt Api.(SCGCQ01619783)
- NVRAM: MR7.6 Vmware6.5 - Incorrect fatal error EVT after PassThrough enabled followed by Guest OS power on.(SCGCQ01600125)
- Nvram changes to Control Parallel Drive FW update via NVRAM variable for OEM - (SCGCQ01605609 CSET).(SCGCQ01617051)
- Patrol read restarts on PDs after completion on reboot.(SCGCQ01718200)
- When patrol read completed with Talladega 9460-8i and MR7.5 components, the customer saw Patrol read complete events were log.(SCGCQ01732235)
- Change the reserve field in structure mode param to follow spc4 spec.(SCGCQ01816426)
- dirty led not set on in case of supercap not present even though dirty cache is present.(SCGCQ01825031)
- 9440-8i / 9460-16i cards BCA_S LED state doesn't match with BCA-S LED Behavior Rule..(SCGCQ01832279)
- [iMR7.5][Bristol] Amber LED doesn't turn on with PD offline.(SCGCQ01767172)
- HDDs spin up failed during boot time and then cause ac cycle failed after around 70 power cycles.(SCGCQ01813023)
- Legacy BIOS Prints "This firmware is a TEST version".(SCGCQ01825992)
- CIT-Lenovo: Same EID assigned to 2 930-8i controllers.(SCGCQ01830180)
- CIT-: Same EID assigned to 2 530-8i controllers.(SCGCQ01883096)
- Make new copy of NVRAM for use with Aero.(SCGCQ01614114 port of SCGCQ01526096)
- Smart Return Status passthru command failed on SATA drives.(SCGCQ01802574 port of SCGCQ01802574)
- MR FW return only compatible profiles.(SCGCQ01809003 port of SCGCQ01789037)
- FW is not blocking switching to an unsupported profile.(SCGCQ01809222 port of SCGCQ01698176)
- HII allows setting controller personality through Manage Controller Profile menu.(SCGCQ01809004 port of SCGCQ01685583)
- HII reports "The requested command has invalid arguments" when attempting to change controller personality.(SCGCQ01813388 port of SCGCQ01715394)
- [UNMAP]: VMWARE 6.5 U1 requires VPD Page B1 support for UNMAP feature.(SCGCQ01816730 port of SCGCQ01563349)
- Set ldRestriction appropriately in MFCD parameters and persistent config pages.(SCGCQ01864195 port of SCGCQ01487406)
- [Bristrol] [MR7.4] "Previous Configuration missing" occurs during reboot test with CC running.(SCGCQ01765212 port of SCGCQ01697887)
- Increase the recon BB list entries to align with BBM MAX BAD entries.(SCGCQ01851104 port of SCGCQ01623254)
- 530-8i- Windows 2016 Dataceneter BSOD.(SCGCQ01880814 port of SCGCQ01830392)
- HDDs spin up failed during boot time and then cause ac cycle failed after around 70 power cycles.(SCGCQ01827311 port of SCGCQ01813023)
- BMC emulator does not load storelibTest.(SCGCQ01849642 port of SCGCQ01762267)
- The SUT can’t boot to OS after 159 loops AC cycle and check the Raid 930-16i 8G.(SCGCQ01788547 port of SCGCQ01788479)

EnhancementRequests (21)
- Added Timeout values to Target Device Properties.(SCGCQ01519777)
- Add build flags for Aero ROC.(SCGCQ01608149)
- Add a new parameter in MR Configuration Parameter Page 0 (NVDATA) to enable/disable parallel PD FW update feature.(SCGCQ01605140)
- Add a new parameter in MR Configuration Parameter Page 0 (NVDATA) to enable/disable mix of Enterprise & Opal SED drives.(SCGCQ01596518)
- Make new copy of NVRAM for use with Aero..(SCGCQ01526096)
- Adding ALADIN section to NVRAM struct..(SCGCQ01567124)
- Added field MR_LD_RAID.flags.isEPD.(SCGCQ01581732)
- nvram changes for Snapdump.(SCGCQ01595634)
- Add back section for ALADIN to NVRAM struct.()SCGCQ01605166
- NVDATA parameter to OPAL SED.(SCGCQ01614695)
- Add supportEPDWithAutoConfigOff bit in NVRAM Auto config parameters.(SCGCQ01739489)
- Exposing Write cache as disabled to host for a performance improvement.(SCGCQ01845298)
- PVT API changes needed to support eHBA product series.(SCGCQ01727349)
- PVT_API changes to support Manufacturing SAS PHY test.(SCGCQ01587381)
- Add Aero EEPROM tag.(SCGCQ01574988)
- Preboot OCR- NVRAM changes to limit the number of reset retries to 1 per boot cycle.(SCGCQ01620774)
- Reduce bootup time by 15-20 seconds.(SCGCQ01735563)
- Do ONFI init only for the valid channels and banks.(SCGCQ01760560)
- Add a new bit for Driver/FW communication in the RAID map.(SCGCQ01713674)
- Add DismStartDelayInSeconds in NVDATA.(SCGCQ01758168)
- The SUT can’t boot to OS after 159 loops AC cycle and check the Raid 930-16i 8G.(SCGCQ01788479)


Version 50.5.0-1615 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:  7.05.02.0
	UEFI Driver: 0x07050401
	HII:   07.05.06.03
	MR FW: 5.050.00-1616
    package 50.5.0-1615

Defect fixes.
SCGCQ01487406-Set ldRestriction appropriately in MFCD parameters and persistent config pages  ( This is the controller property update defect)
 
SCGCQ01845298- Exposing Write cache as disabled to host for a performance improvement ( Performance Defect)
 
Note : 
1.This 18B build doesn't have the  HII sorting issue fix  backported - Reason being HII and EFI driver is yet to be signed for 18D( this has the fix), However shared  18B package has signed EFI driver and HII ( w/o HII sort fix)

Version 50.5.0-1510 - Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:  7.05.02.2
	UEFI Driver: 0x07050403
	HII:   07.05.06.05
	MR FW: 5.050.00-1526
	package 50.5.0-1510

- (IOP-Only.(SCGCQ00138036 ) 
 - Write Cache enable to be done after we are done with all in memory things(SCGCQ00138178) 
 - Thunderbolt hangs at diag reset but works fine at reboot	(SCGCQ00140379) 
 - Fix unused variable(SCGCQ00140591) 
 - Change hardcoded fault code to a properly defined code.(SCGCQ00141606) 
 - Degraded Physical Disk coming as optimal when a diag reset is issued on a pending resync raid10 volume in Linux(SCGCQ00141891) 
 - x5891 Fault After OPEN Timeout(SCGCQ00145434) 
 - FPGA: Gen3 TaskMgmt: 0x265D Fault When Processing Multiple TARGET RESET TMs(SCGCQ00145645) 
 - Correction to Diagnostic Code to Show PL Memory Details(SCGCQ00145990) 
 - FPGA: Gen3 TaskMgmt: 0x5110 Fault on Overlapped TARGET RESETs to SATA devices(SCGCQ00146626) 
 - Fault 265D occurs when running IOs to volume which has 1 drive connected via cable breaker & 1 direct attached,to HBA.(SCGCQ00147098) 
 - FPGA: Timers executing too quickly(SCGCQ00147270) 
 - Fast Path started, Firmware completed IO not working. Host sees 0x00 value in reply descriptor SMID(SCGCQ00148012) 
 - Kantana RAID accelerator base effective address conflicts with cached context memory address	(SCGCQ00149244) 
 - Update rmtflash Perl script debugger breakpoint address(SCGCQ00155189) 
 - Constant/register form of MoveToDCR assembly language macro incorrect( SCGCQ00155799 ) 
 - Fault 0x0612 when performing a Message Unit Reset( SCGCQ00156372 ) 
 - FPGA: FPGA stops repsonding after Diag reset	( SCGCQ00158578 ) 
 - MPI firmware download command never completes( SCGCQ00160359 ) 
 - After downloading FW with SAS FLASH, controller hangs( SCGCQ00162026 ) 
 - Fault 265D occurs when an Inquiry for VPD Page 0x80 is issued to an IR Volume(SCGCQ00163833 ) 
 - FPE fault D094( SCGCQ00167842 ) 
 - Changes to preamble finder and gate training algorithms( SCGCQ00168441 ) 
 - Fpe exception queue interrupt handling does not update queue if an entry is invalid( SCGCQ00168593 ) 
 - PL is faulting with fault code 0xd075 when an IO times out( SCGCQ00170147 ) 
 - Problems running Cobra DDR3 library on Palladium	( SCGCQ00173068 ) 
 - Fault D091 with Destructive Domain Validation Test.( SCGCQ00173093 ) 
 - ReadBuf Command hangs( SCGCQ00174555 ) 
 - Host boot will fails	( SCGCQ00175662 ) 
 - FPGA: IOs fail during Target Mode SSP TM tests( SCGCQ00177626 ) 
 - D110 fault while doing Block Move test( SCGCQ00181603 ) 
 - Fault 670A with Block Move Test and Powercycling Enclosures( SCGCQ00181751 ) 
 - Internal Customer has integration issues with trial release of DDR3 library( SCGCQ00182818 ) 
 - MPI2: IO Unit Page 10 structure incorrect( SCGCQ00183867 ) 
 - SBR byte names don't match Invader EDS or address macros	( SCGCQ00184890 ) 
 - Phy power code is using the wrong mask( SCGCQ00186364 ) 
 - Changed data type returned by getDataScrubDuration(( SCGCQ00187141 ) 
 - Occasionally RMTFLASH can be difficult to make work correctly( SCGCQ00187266 ) 
 - Create workaround for [invader]932( SCGCQ00187388 ) 
 - Fault 0x2663 while running Task Management and IOs( SCGCQ00187408 ) 
 - TBM Recursive Fault( SCGCQ00187763 ) 
 - Controller faults with code 6003 while running task management tests	( SCGCQ00187962 ) 
 - Host booting firmware does not load firmware	( SCGCQ00188336 ) 
 - Core reset causes high latency in Ethernet( SCGCQ00188834 ) 
 - FPGA build would hang on boot/startup( SCGCQ00188929 ) 
 - Fixes to enable Ethernet in mainline builds	( SCGCQ00189763 ) 
 - Modified ring and trace buffer dump to display the data when called from an active console( SCGCQ00189799 ) 
 - Bad output from CLI command iop show mreq( SCGCQ00190178 ) 
 - Gen3: A Jammer script sends too much data for a Read command which results in SysDmaParity fault.( SCGCQ00190412 ) 
 - Fault 0x1901 when firmware errors out IOs with Invalid Descriptor( SCGCQ00190906 ) 
 - Gen3 PwrMgmt: Update shared global Pwr Mgmt structures.( SCGCQ00192501 ) 
 - Misplaced pre-processor directive in pbam.h causes big endian compiles to fail( SCGCQ00192631 ) 
 - Syntax error in pbam.h - missing semicolon in structure definition( SCGCQ00192913 ) 
 - 2nd set of changes to DDR3 library from lab validation( SCGCQ00193153 ) 
 - The fast path status of drives used for volume spares or hot replacement retain Fast Path state of Enabled.( SCGCQ00193388 ) 
 - Firmware repeatedly sending a event whenever it get a spinup notify causes target mode initialization to stall( SCGCQ00194444 ) 
 - FPE Status values passed to iopiFPEHandleException( SCGCQ00194558 ) 
 - Ethernet: Ethernet Page 0 addresses reported in the wrong endian	( SCGCQ00194888 ) 
 - Gen3 PwrMgmt: Unexpected event is sent when changing Direct Attached HDD Pwr states.	( SCGCQ00194919 ) 
 - IO Timeouts/0x6001 fault during SATA TM Read Mayhem test	( SCGCQ00195557 ) 
 - Fault 0x060F when sending very heavy IO load	( SCGCQ00198466 ) 
 - BIST firmware not accurately performing or reporting BIST status	( SCGCQ00200151 ) 
 - Invader A0: D072 Fault during stress and whole port glitches	( SCGCQ00200261 ) 
 - Invader A0: 5893 Fault when the whole port (between enclosures( SCGCQ00200645 ) 
 - Fault 0x0A03 or 0x1609 seen under various circumstances( SCGCQ00202530 ) 
 - UART doesn't display authentication prompt when expected	( SCGCQ00202951 ) 
 - Unable to DMA the debug string token	( SCGCQ00203007 ) 
 - IO timeout to SATA target behind expander.( SCGCQ00203063 ) 
 - Invader A0 - Script 'ctrlSysLogSrv.pl' doesnt prints firmware logs when a hostname with fully qualified domain name is given for 'clientName' argument( SCGCQ00203291 ) 
 - Gen3: PM - Global Power Management TAKE/RELEASE CONTROL requests never complete.	( SCGCQ00203509 ) 
 - Resync happens when RAID1E vol(After clean shutdown( SCGCQ00206367 ) 
 - The DefaultMetadataSize field in IocPage6 is now populated with the number of MBs and not the number of sectors.( SCGCQ00206785 ) 
 - Invader A0: IOUnit Page 7 showing a PCIeSpeed of 2.5G when running at 8.0G.( SCGCQ00207545 ) 
 - Gen3: PwrMgmt initialization may cause a 265D fault at start of day.	( SCGCQ00207646 ) 
 - Invader A0 : Incorrect data from Log Page 0 on second read.	( SCGCQ00207682 ) 
 - The fast path state for newly discovered SATA drives was being set incorrectly.( SCGCQ00209162 ) 
 - FPGA-only: Zero initialized TCM data area not getting cleared( SCGCQ00209959 ) 
 - .10 firmware faults on boot with a 0x0012 fault code	( SCGCQ00209969 ) 
 - Invader A0: All devices go missing when the link between the first two expanders is broken( SCGCQ00210025 ) 
 - 8-port Fury controller has incorrect PCI Device Id( SCGCQ00210028 ) 
 - Fault 9019, during DDR3 initialization, with dual rank support enabled.( SCGCQ00210290 ) 
 - DDR3 Library fault 0x9019 observed when ECC enabled on 32bit width memory( SCGCQ00210687 ) 
 - DDR3 Library Faultcode 0x9019 observed on some boards( SCGCQ00215958 ) 
 - PPC476 L2 store re-ordering with address match collision can cause data corruption( SCGCQ00218038 ) 
 - Failures connecting to SATA drives or expander attached disks( SCGCQ00218117 ) 
 - Intermittent Read Leveling Failure( SCGCQ00221265 ) 
 -( SCGCQ00221570 ) 
 - Invader A0 (USB( SCGCQ00222099 ) 
 - Invader A0: Controller hangs when releasing snapshot buffer( SCGCQ00222775 ) 
 - Fault 0x265D seen when performing Message Unit Reset with posted diagnostic buffer.( SCGCQ00222847 ) 
 - Invader A0: 0x1808 fault when flashing firmware with DDR enabled	( SCGCQ00223684 ) 
 - Fault 5845 seen when running IO with cable glitching	( SCGCQ00224215 ) 
 - Invader A0: 0x2622 Fault seen during initialization in Romley (PCIE3.0 system( SCGCQ00224800 ) 
 - Firmware displayed wrong version number( SCGCQ00225971 ) 
 - Invader A0 IR firmware fault with the error code 8316( SCGCQ00227202 ) 
 - Invader B0: Local Chain hardware incorrectly configured( SCGCQ00227842 ) 
 - Invader A0: Fault x5842 with running Block Move and Task Management Test (SCGCQ00227896 ) 
 - Fault x5900 seen running heavy IO with discovery	( SCGCQ00228216 ) 
 - Changed MfgPage10 bit IOC_MFG10_GF0_CONSISTENCY_CHECKING_DISABLED definition.( SCGCQ00228747 ) 
 - Read leveling error interrupt is observed after DDR initialization( SCGCQ00228826 ) 
 - R10/R1E volume Resync is not happening after activating a foreign volume with UNCLEAN shutdown (w/_CC_DISABLED	( SCGCQ00229652 ) 
 - Fault 0x5842 occurs when cable break/glitching done running IO( SCGCQ00232016 ) 
 - Machine Check Interrupts prevent firmware from loading( SCGCQ00237604 ) 
 - SAS3: 0x265D Fault while disabling Fast Path.( SCGCQ00238050 ) 
 - Romley system hangs during POST with two Invader HBAs installed( SCGCQ00238686 ) 
 - DIS(Data Integrity Signature	( SCGCQ00239359 ) 
 - IO timeouts while running stress loads on a mix of SAS and SATA drives( SCGCQ00239369 ) 
 - Restored memcfg.c( SCGCQ00239519 ) 
 - CSET 235613 includes unexpected changes( SCGCQ00242171 ) 
 - Large IO size to mixed SAS/SATA causing errors( SCGCQ00242618 ) 
 - PL Fault 0x670C( SCGCQ00243099 ) 
 - ONFI: Remove unrelated defines( SCGCQ00245410 ) 
 - Failing a drive in RAID1 volume having write caching enabled resulted in dereference of a NULL pointer.( SCGCQ00245750 ) 
 - DDR3 Training fails at 1866 MTS due to preamble not found on some lanes( SCGCQ00245842 ) 
 - MSIX Table Size field in Config Space doesn't match supported value( SCGCQ00247483 ) 
 - ONFI: Bug in the onfiiFlashContReset function( SCGCQ00247604 ) 
 - Discovery error x90 while running IOs on a mix of SAS and SATA drives.( SCGCQ00249597 ) 
 - ONFI: DMA state of the controller not updated properly( SCGCQ00250932 ) 
 - ONFI: Update the diag command to reflect the change in ONFI interface function( SCGCQ00252023 ) 
 - Moved files that called MoveFromDCR back to IopCommon.h	( SCGCQ00257836 ) 
 - Fault 0x58B4 when trying to run on a 4port controller( SCGCQ00258518 ) 
 - NVData Schema: Update schema for 4-phy devices to contain the correct number of phys	( SCGCQ00258713 ) 
 - NVData: Incorrect NVData image used in A0 parts	( SCGCQ00259169 ) 
 - Code analysis tool defects resolution	( SCGCQ00263862 ) 
 - (IOP	( SCGCQ00270313 ) 
 - DDR3 library fails to train second rank of dual rank memory successfully( SCGCQ00271260 ) 
 - IOP Interrupt causes 0x0D03 fault in B0 chips( SCGCQ00277833 ) 
 - IOP Ethernet Phy driver sends link down event when the link is not down( SCGCQ00279273 ) 
 - Invader B0: 6003 fault while running SSP_INIT_Normal_List group of jammer scripts( SCGCQ00280742 ) 
 - PI Errors on Remove and Insert of Volume Member( SCGCQ00282383 ) 
 - Print function may access an out-of-bound array element( SCGCQ00282902 ) 
 - Training fails on second rank, with certain memory and speeds( SCGCQ00284177 ) 
 - ONFI flash controller interrupts should not be communicated to MPIC( SCGCQ00284520 ) 
 - Fixed source level debugging using GHS probe.( SCGCQ00286179 ) 
 - Fault d075 - Frameownership issue for FP IO which is already failed with exception.( SCGCQ00286703 ) 
 - Invader B0: FPE Manager Fault code cleanup and documenation update( SCGCQ00286906 ) 
 - 0x26B1 fault when BIOS initializes firmware( SCGCQ00287155 ) 
 - Fast Path hardware Auto Pend and Completion events don't work.( SCGCQ00287160 ) 
 - Cannot change CPU speed from 50% to 1005 using the serial port diagnostic command.( SCGCQ00291334 ) 
 - Fault x5801 seen running IO with Task management	( SCGCQ00292512 ) 
 - Volume removal resets the controller for further operations.	( SCGCQ00292814 ) 
 - Invader faults with 0x7C39 when sending Security Protocol Out Disable Password command( SCGCQ00293371 ) 
 - IOP: Fault 0x2625 while accessing PCI registers( SCGCQ00294460 ) 
 - L2 Parity error occurs when dumping SAScore registers via UART command( SCGCQ00296461 ) 
 - Address in the descriptor is physical and cannot be used directly as virtual address	( SCGCQ00296758 ) 
 - ONFI: Creating Bad Block list returns failure status on B0( SCGCQ00297974 ) 
 - Invader B0: SATL:'Additional Sense' not set for REQUEST SENSE command when the drive is moved to IDLE power condition state( SCGCQ00300293 ) 
 - Invader NVData MfgPg16 contains duplicate element names( SCGCQ00304780 ) 
 - DDR3 library: Change PHY ODS and slew rate settings for clock( SCGCQ00304789 ) 
 - Invader B0: 0x0612 fault while powering down SLES11.2 system	( SCGCQ00304856 ) 
 - ONFI B0: BadBlockList creation takes several minutes for Bank1( SCGCQ00316044 ) 
 - (FPGA( SCGCQ00316360 ) 
 - Foreign volume activation fails in the presence of failed native volume( SCGCQ00319367 ) 
 - ONFI: Flash Clock Divider not set properly( SCGCQ00321327 ) 
 - Reserved field of IOCFacts Reply is set to non-zero value( SCGCQ00322950 ) 
 - Invader B0: Fault 583A during Destructive Domain test( SCGCQ00323745 ) 
 - Configuration pages of type Ext Manufacturing are not available in CLI( SCGCQ00324561 ) 
 - CCR Version Changes to Enable Support for Invader C0 Chip Revision.( SCGCQ00326701 ) 
 - NVDATA Change to Allow Support for Invader C0 Chip Revision	( SCGCQ00326818 ) 
 - Low performance seen doing very low Q depths (1,2,3 outstanding IO levels( SCGCQ00328670 ) 
 - Turned S/W chain pull back on.( SCGCQ00332189 ) 
 - (NVDATA( SCGCQ00334156 ) 
 - Supress the miniDMA debug prints by default.( SCGCQ00334572 ) 
 - DIAG_SHOW_MREQ_DETAIL feature fails to compile( SCGCQ00350762 ) 
 - (IOA	( SCGCQ00353301 ) 
 - Back end PCI bring up( SCGCQ00353319 ) 
 - Backend PCIe doesn't handle Legacy interrupts( SCGCQ00361845 ) 
 - Initial NVMe bringup fixes( SCGCQ00363615 ) 
 - When running RBD, Python interpreter is not found( SCGCQ00364511 ) 
 - New flag to force the DQS sampling window further than what was calculated( SCGCQ00368461 ) 
 - StartFPGA GUI doesn't gracefully die when network connection is not available( SCGCQ00376571 ) 
 - Some PCIe config page fixes( SCGCQ00392850 ) 
 - Clean up task for Dauntless #defines when building PL / CFGI library...( SCGCQ00398327 ) 
 - Update the usblib/sas3hw.h file to the latest( SCGCQ00399265 ) 
 - Fixes for non read/write SCSI IO requests to a backend NVMe device( SCGCQ00399268 ) 
 - Critical Fixes for PCIe IO Unit config pages	( SCGCQ00400007 ) 
 - Unaligned CE Image causes PL fault 0xd115 when using CE Auto Load( SCGCQ00408789 ) 
 - Backend NVMe devices don't work if stored host page size is invalid( SCGCQ00410848 ) 
 - (BUILD( SCGCQ00413626 ) 
 - Handle Stang BAD_ALIGNMENT exception differently	( SCGCQ00414488 ) 
 - Modify handling of a couple of Stang exceptions	( SCGCQ00415459 ) 
 - NVMe: Data corruption and unexpected IO failures	( SCGCQ00418954 ) 
 - MaxPayload/MaxReadRequestSize are getting set to strange values in some cases( SCGCQ00420926 ) 
 - Build without PL_FEATURE_PCI_DEVICE_SUPPORT fails to compil( SCGCQ00434704 ) 
 - SAS3.5: Add ALADIN feature macro and add pliAladin function calls to pliComplianceCheck.c.( SCGCQ00436117 ) 
 - Dauntless F/W not setting PCIe protocol support in ProtocolFlags in IOCFacts	( SCGCQ00436936 ) 
 - AHCI: read timeout after issuing MODE SENSE command( SCGCQ00441381 ) 
 - The TBM is initialized twice in Invader (and Dauntless( SCGCQ00443385 ) 
 - AHCI: PL shouldn't fault when AHCI SGL translation encounters an invalid address	( SCGCQ00443456 ) 
 - NVMe: PL shouldn't fault when NVMe SGL translation encounters an invalid address	( SCGCQ00448246 ) 
 - Data Corruption observed during IO + "random" TM to AHCI	( SCGCQ00457786 ) 
 - PL: Firmware path read/write IOs to backend PCIe devices may time out( SCGCQ00481302 ) 
 - NVMe Encapsulated Path Fixes	( SCGCQ00493331 ) 
 - NVMe: IO timeouts or fault after several command failures( SCGCQ00495200 ) 
 - IO's Fail to SAS/SATA Drives	( SCGCQ00504669 ) 
 - NVMe: 60D fault on encapsulated request failure( SCGCQ00504708 ) 
 - SAS3.5FW: PL: PCI: Use PliRegister for device registration instead of hardcoded value( SCGCQ00558177 ) 
 - Build errors - Fix many lint-related bugs introduced last week.( SCGCQ00568553 ) 
 - NVMe: Fix several mode page related bugs	( SCGCQ00570058 ) 
 - DAUNTLESS: Update several items in SPI Flash for Dauntless( SCGCQ00593519 ) 
 - Firmware boot failure occurred because of some IOP workarounds and flash layout not being updated in scripts that are used to erase and program flash memory.( SCGCQ00599967 ) 
 - Dauntless: Fault 265D MPI IO Unit Control Message - CLEAR PERSISTENT	( SCGCQ00604486 ) 
 - Some of the declarations and typedefs in pliDefs.h not conforming to code standard( SCGCQ00606222 ) 
 - Incorrectly named PLI_RUNTIME_CONFIG flag definitions( SCGCQ00606259 ) 
 - Delay timers are not used properly for some FPGA applications( SCGCQ00610868 ) 
 - Few minor backend PCIe related changes( SCGCQ00613904 ) 
 - Bug Fixes in NVMe Encapsulated IO Path( SCGCQ00621303 ) 
 - NVMe: IEEE to PRP translator rollback issues	( SCGCQ00626787 ) 
 - Inappropriate setting of PCIe and Man Page 12, 13 parameters for Intruder in xsd file( SCGCQ00649433 ) 
 - SAS 3.5 FW: 0x265d fault during bootup with tip code	( SCGCQ00654908 ) 
 - Intruder: REMAPPED_SASCORE1 is a IOP-only define	( SCGCQ00663251 ) 
 - Change NVDATA to not limit Intruder Man Pages to just 2 phys	( SCGCQ00670987 ) 
 - Intruder: Fix unprotected loop in plTargetProcessHardReset(	( SCGCQ00678870 ) 
 - CLI command "iop show cfg PHY 4" only returns data for PHY 0	( SCGCQ00682913 ) 
 - Ventura: arm_all build might fail with error	( SCGCQ00685835 ) 
 - VENTURA: Fix various issues in SPI library( SCGCQ00686523 ) 
 - Ventura: Firmware aborts during SOD intialization( SCGCQ00688139 ) 
 - Ventura: Phy13 repeated twice in ManPage5( SCGCQ00688188 ) 
 - Ventura: vector mismatch errors when validating sectors.	( SCGCQ00694613 ) 
 - VENTURA: SPI Flash init does not return failure if SRAM buffer size is not specified	( SCGCQ00698193 ) 
 - Firmware faults when downstream port of attached PCIe switch sends uncorrectable fatal error for malformed TLP it received from connected device.( SCGCQ00699010 ) 
 - Ventura: Processor abort when initializing Txdma buffer( SCGCQ00700796 ) 
 - Backend PCIe: AHCI spinup may fail( SCGCQ00702640 ) 
 - VENTURA: SPI DCR End address is not set for CS2, CS3, CS4( SCGCQ00705378 ) 
 - Faulting Firmware only sends SAS Trace trigger out on Core 0 phys( SCGCQ00712956 ) 
 - VENTURA: SPI Flash HW workaround for SPI writes( SCGCQ00713020 ) 
 - Incorrect assignment of PBAM SGPIO Instance Size macro( SCGCQ00715174 ) 
 - Ventura: Lower bits of physical address are lost when converting virtual to physical addresses( SCGCQ00715570 ) 
 - VENTURA: cfgi lib appears to use more memory than requested/allocated( SCGCQ00716821 ) 
 - Intruder: remap SAS Core addresses earlier in the start-of-day routine( SCGCQ00722594 ) 
 - Intruder FPGA (IOP FW( SCGCQ00725988 ) 
 - NVMe: devices always fail to initialize( SCGCQ00729685 ) 
 - Ventura: Incorrect Case in Function Parameter( SCGCQ00734961 ) 
 - Intruder FPGA: Fault 0x060f while running Heavy Read IO Stress Test( SCGCQ00735932 ) 
 - Dauntless: tip code appears to be broken	( SCGCQ00737126 ) 
 - Fault 0x6001 While running Task Abort to topology of only SATA Drives during I/O.( SCGCQ00740832 ) 
 - Ventura: Too many device handles are being allocated	( SCGCQ00747380 ) 
 - Ventura: Bad merge backed out the fix in SCGCQ00716821( SCGCQ00748108 ) 
 - Ventura: Internal SCSI W/R tests fails to allocate memory( SCGCQ00751433 ) 
 - Intruder FPGA: Fault 0xD062 while running Block Move and Task Management test to SATA Only( SCGCQ00759067 ) 
 - Ventura: System abort in bootloade( SCGCQ00759376 ) 
 - Ventura: Linking Remote Flash Fails( SCGCQ00759589 ) 
 - Ventura: ARM Make Clean sometimes fails	( SCGCQ00762890 ) 
 - Fault xD117 seen when running IO with Task Management Abort Task and Abort Task Set TMs being issued	( SCGCQ00762899 ) 
 - IOP: PowerPC ITLB Miss Errata, additional linker changes	( SCGCQ00765342 ) 
 - pliProtos.h contains 2 internal protos for sim/fake IO( SCGCQ00769245 ) 
 - Fix build clean syntax( SCGCQ00769432 ) 
 - CFGI library linking errors with gcc	( SCGCQ00771070 ) 
 - pl: backend PCIe: couple of PCIe IO Unit Page 1 issues( SCGCQ00776230 ) 
 - NVMe: EF08 fault during non target reset task management	( SCGCQ00776392 ) 
 - Intruder FPGA: Fault 0xC00C while running Initiator and Target Mode on Intruder Cores( SCGCQ00776417 ) 
 - Ventura: Write to NVSRAM does not function properly( SCGCQ00776859 ) 
 - Ventura: after boot SAS drives take minutes to complete discovery( SCGCQ00780785 ) 
 - Ventura: Build utilities won't compile( SCGCQ00790266 ) 
 - Intruder FPGA: 0xD20C Fault While Running Stress From 4 Initiator System to Target Mode FPGA	( SCGCQ00791373 ) 
 - Ventura: PCIe Discovery problems observed with device reset test.( SCGCQ00793909 ) 
 - NVMe: D300 fault on malformed chain to PRP list SGL( SCGCQ00794103 ) 
 - Dauntless: tip code is broken( SCGCQ00798119 ) 
 - pl: backend PCIe: special case cascaded switch issues( SCGCQ00799848 ) 
 - Intruder FPGA: Add interrupt handler back in for IOP Completion Queue notempty for Ventura builds( SCGCQ00807447 ) 
 - SAS3.5 Build for rmtflash_fpga is failing( SCGCQ00810267 ) 
 - SAS3.5 rmtflash_fpga does not build( SCGCQ00811369 ) 
 - Default NVDATA Values for Ext Mfg Pages 42/43 Are Incorrect( SCGCQ00813906 ) 
 - Dauntless FPGA: Data Corruption reported on multiple tests( SCGCQ00813954 ) 
 - Manufacturing Page 2 Word Size is Incorrect( SCGCQ00821488 ) 
 - Ventura: Sascore 1 links do not come up( SCGCQ00822145 ) 
 - Ventura: "iop arm table" crashes due to missing string( SCGCQ00829296 ) 
 - Intruder Bring up( SCGCQ00832698 ) 
 - IOP: SASCore base addresses don't need to be sequential.( SCGCQ00833117 ) 
 - BL: Intruder A0 faults with code 0x2622( SCGCQ00833775 ) 
 - Ventura: Add Parity and SysDMA work-arounds for initial Maverick core( SCGCQ00835360 ) 
 - IOP: Fault 0x0701 seen on first boot of firmware flashed to blank Intruder A0 board( SCGCQ00835379 ) 
 - IOP: Intruder firmware faults 0x2622 on A0 during a cold boot from flash	( SCGCQ00835435 ) 
 - IT Release Build Script Not Copying All the Correct Files( SCGCQ00836314 ) 
 - IOP: Firmware download request can cause firmware to become unresponsive	( SCGCQ00836356 ) 
 - Fixed IT Signed Firmware Build	( SCGCQ00836362 ) 
 - Ventura: backend PCIe: host bringup fixes, part 1( SCGCQ00837192 ) 
 - Ventura: Fix Utility Compilation Issues - Round 1( SCGCQ00837242 ) 
 - Fix comiplation of some utilities in controllerfw/bld.( SCGCQ00837270 ) 
 - Intruder: NVData had the incorrect PCI Vendor ID in General Data area( SCGCQ00840317 ) 
 - Ventura: SAS_R31_HACK doesn't always compile correctly( SCGCQ00841016 ) 
 - IOP: Flash writes may cause firmware to fault with code 0x0701( SCGCQ00842428 ) 
 - Fixed Build Release Scripts to Copy Correct NVDATA Files	( SCGCQ00842477 ) 
 - Ventura IOP compile and run-time issues when enabling MSS library.( SCGCQ00843974 ) 
 - Intruder A0: Fault 0x5872 during I/T Switching( SCGCQ00844812 ) 
 - Ventura: core level interrupt starvation	( SCGCQ00844856 ) 
 - Ventura: backend PCIe: fix some scattered bugs( SCGCQ00845780 ) 
 - Ventura: Add fixes for PCI IRQ and DM Register Bugs( SCGCQ00848174 ) 
 - Instance of IOP directly accessing PL to fault the controller( SCGCQ00849745 ) 
 - Cleanup IOP Access to gplPtrPdbRegs( SCGCQ00849748 ) 
 - IOP firmware accesses PL firmware directly without going through PLI	( SCGCQ00849749 ) 
 - Ventura: Fault 0xD06 (Spurious interrupt	( SCGCQ00849760 ) 
 - IOP: Vector Mismatch reported after full erase and flash of firmware and SAS Address	( SCGCQ00850743 ) 
 - Ventura: backend PCIe: core level interrupt starvation( SCGCQ00851229 ) 
 - IOP: Flash memory does not have read side effect attribute set( SCGCQ00852087 ) 
 - IOP: iopiDiagCmdReadMem( SCGCQ00852274 ) 
 - Ventura: Workaround for iopiDiagCmdReadMem( SCGCQ00852920 ) 
 - Intruder A0: 265D fault observed during link reset task management with IO( SCGCQ00853930 ) 
 - NVDATA: Fix field offsets to Manufacturing Page 12 XML( SCGCQ00855011 ) 
 - Ventura: need to use ARM_IRQ_PRIORITY_POLL for polled interrupts	( SCGCQ00856520 ) 
 - Ventura FPGA: need workaround for host side SysDma in 3.0 bitstreams	( SCGCQ00856692 ) 
 - Ventrura: Accessing Mode Sense pages for NVME Results in alignment fault	( SCGCQ00857247 ) 
 - Ventura FPGA: Old config valid RAM flags set in flash limits memory available for use( SCGCQ00860688 ) 
 - Ventura FPGA: Faults observed when powering off/on populated PCIe switch	( SCGCQ00861780 ) 
 - Ventura: NVMe: PL translated non read write commands may time out( SCGCQ00862206 ) 
 - View and Modify the iop dbgmask ir through Intruder CLI( SCGCQ00864796 ) 
 - Ventura: When processing SAS core interrupts, sometimes status register indicates no active interrupts( SCGCQ00866361 ) 
 - Ventura: backend PCIe: backend completion timeouts occur when the FPGA is heavily loaded	( SCGCQ00866758 ) 
 - Change the naming of library defines DEBUG and TARGET to avoid conflicts with customers	( SCGCQ00866760 ) 
 - ComboSerdes library builds for Ventura do not complete succesfully( SCGCQ00867359 ) 
 - Bug in strtoul( SCGCQ00867905 ) 
 - Intruder A0: Manufacturing Page 9 configurations for number of Virtual functions set to 1 for Non-SRIOV firmware	( SCGCQ00868952 ) 
 - Able to see informaton on Integrated RAID information in Manufacturing Pages 4 and 10( SCGCQ00869324 ) 
 - Ventura: Structures not being put in IOA Local RAM( SCGCQ00869574 ) 
 - IOP: I2C uninitialized variables and GPIO switch break( SCGCQ00870602 ) 
 - IOP: Removed dead code from CLI read memory function	( SCGCQ00870625 ) 
 - Ventura: backend PCIe: target reset to AHCI device times out	( SCGCQ00871680 ) 
 - PL: Fix bad coding style in plGetSpinupGroup	( SCGCQ00871683 ) 
 - Ventura: backend PCIe: fix 'iop scsi big' debug command( SCGCQ00872109 ) 
 - PL: Firmware does not fill in SAS IO Unit Page 16 Timestamp field correctly( SCGCQ00872141 ) 
 - IOCfacts Reply Error for Ventura regarding SOP Protocol( SCGCQ00872258 ) 
 - Bug in strtoul( SCGCQ00873987 ) 
 - Ventura: ARM build failures do not cause "bld33xxgnu all" to fail( SCGCQ00873994 ) 
 - Gen 3.5: Cleanup IOP access to PL( SCGCQ00873995 ) 
 - NO_FPE_HW compile option updates	( SCGCQ00879534 ) 
 - Ventura: backend PCIe: issues related to Axi2Shell error handling( SCGCQ00880773 ) 
 - Incorrect PCIe Readings in UART with Intruder( SCGCQ00880938 ) 
 - Fix two separate 0x265D faults( SCGCQ00881295 ) 
 - Transition from MPI SAS IO Unit Control request to IO Unit Control request coding incomplete( SCGCQ00883285 ) 
 - SAS/SATA power management was enabled by mistake	( SCGCQ00884080 ) 
 - Intruder: Build error after merging firmware files( SCGCQ00884551 ) 
 - Ventura: RMC code does not build	( SCGCQ00885675 ) 
 - PL faults on PNPR Error Syndrome interrupt that is hit during link glitch test( SCGCQ00885805 ) 
 - IOP: UART outputs 18 instances of Manufacturing Page 9( SCGCQ00888269 ) 
 - TigerStryker: Liger PL Library build needs to allow debug symbols to be built( SCGCQ00890807 ) 
 - SASSDCHANLANEADDR Macro formula is incorrect	( SCGCQ00894128 ) 
 - Tiger/Stryker: Fix tiger firmware build and build all issues	( SCGCQ00894132 ) 
 - Tiger/Ventura: change FXCore init delay to coding standard format( SCGCQ00894651 ) 
 - Ventura: interrupt handler latency in CPU not sleeping case( SCGCQ00897157 ) 
 - Tiger/Stryker: Fix compiler error with tigerfpga build( SCGCQ00897468 ) 
 - Ventura: backend PCIe: need to update master XSD file for SCGCQ00865951( SCGCQ00902961 ) 
 - Ventura: MemRd Requests that have TH bit (TPH Requestor Capability( SCGCQ00906745 ) 
 - PL: Update internal files to latest specifications( SCGCQ00913173 ) 
 - NVDATA: Fix tests against chip revision( SCGCQ00914503 ) 
 - Modify the code to use polling instead of interrupts( SCGCQ00915173 ) 
 - Ventura: backend PCIe: reformulate switch WWID( SCGCQ00915987 ) 
 - Ventura: Build fixes to make Tiger build all work( SCGCQ00916056 ) 
 - IOP: IO Unit Page 7 is not returning a valid PCIe width( SCGCQ00917309 ) 
 - IOP: CLI commands iop show tlb or iop show mem cause 0x265D fault( SCGCQ00917602 ) 
 - Ventura: Uart CLI history option not working	( SCGCQ00919245 ) 
 - Not able to link SASFW_Ventura_Phase_0.6 00.250.49.00 Pl library	( SCGCQ00921951 ) 
 - VENTURA: SPI write/read/erase perform over/under run in corner cases	( SCGCQ00923741 ) 
 - Remove the dependency from the HW definitions in sasctrlfw/common/if/pl/pliDefs.h( SCGCQ00925701 ) 
 - Soft reset the Guinness CSW PUB block on initialization( SCGCQ00926428 ) 
 - Tiger: include CSW lib in Tiger builds( SCGCQ00928508 ) 
 - TigerStryker: Fix pl library build for liger release	( SCGCQ00930678 ) 
 - Ventura non-debug images have debug( SCGCQ00932961 ) 
 - Ventura: Tip code faults with 0xECA6	( SCGCQ00933078 ) 
 - PL Ventura: MultipP bit not set in Inquiry( SCGCQ00933818 ) 
 - Sbus accesses fail and not all serdes spico processors are started( SCGCQ00936651 ) 
 - IOP: Tiger: Tiger firmware doesn't boot( SCGCQ00936948 ) 
 - IOP: PCI Core resets incorrect hardware( SCGCQ00937441 ) 
 - Ventura: SPI library init twice with different chip selects will override DCR start and stop of first chip select( SCGCQ00937998 ) 
 - Tiger: Fix Priority Interrupt bitfield in Maverick Header file.( SCGCQ00938471 ) 
 - Ventura: Misc initial bring-up work-arounds( SCGCQ00938539 ) 
 - SAS Phys 4-7 in each CSW block do not connect( SCGCQ00940212 ) 
 - CRC errors during firmware upload on ventura	( SCGCQ00940386 ) 
 - Tiger: Critical Interrupts from VIC_1 not returning the correct IRQ number( SCGCQ00942278 ) 
 - Tiger: Inbound MSIx Interrupt not getting cleared correctly( SCGCQ00942413 ) 
 - Ventura: Host PCIe Adapter returns CRS forever after host boot( SCGCQ00943062 ) 
 - AACS Server function imported from AAPL causes a Cub firmware fault( SCGCQ00943276 ) 
 - Ventura: A.0 SPILIB does not erase and read SPI flash in auto mode( SCGCQ00944053 ) 
 - Tiger: FW hang on init( SCGCQ00944113 ) 
 - Tiger: PSB PEX hardware initialization code requires data synchronization barrier( SCGCQ00944153 ) 
 - Ventura: Boot time from SPI is too long for PCIe compliance( SCGCQ00944645 ) 
 - Ventura: Invalid Mid (0xDDDD	( SCGCQ00944646 ) 
 - Tiger: Disable Reply FIFO Coalescing for TIGER FPGA	( SCGCQ00944648 ) 
 - Tiger: Fix compilation issues with Multi MSIx reply feature disabled	( SCGCQ00944729 ) 
 - Dauntless Builds Not Completely Removed.	( SCGCQ00944759 ) 
 - Ventura: usable size of OCM is much smaller than expected( SCGCQ00944934 ) 
 - Host PCIe link doesn't come up after warm reboot in most cases( SCGCQ00947329 ) 
 - VENTURA: SPI library: Need memory sync on SPI flash write operation( SCGCQ00948417 ) 
 - AAPL diag.h file contains an unused structure with floating point members( SCGCQ00949576 ) 
 - Ventura: When firmware is booted from FLASH not all of the writable FLASH is mapped (Fault 0x265D( SCGCQ00949777 ) 
 - PCIe / SAS/SATA switching is not working	( SCGCQ00949800 ) 
 - Tiger: Fault 0x1403 with tip code( SCGCQ00949803 ) 
 - Ventura: Combined MSIX Mode Fails( SCGCQ00950015 ) 
 - Ventura: Data abort when booting harpoon image( SCGCQ00950072 ) 
 - Tiger: Fix build all	( SCGCQ00950161 ) 
 - Ventura: Harpoon successfully boots Ventura image( SCGCQ00950212 ) 
 - Tiger: PCIe discovery and configuration fixes( SCGCQ00950664 ) 
 - Harpoon: Data abort when initializing system	( SCGCQ00950857 ) 
 - VENTURA: firmware download and bootup fault with boot fault 1C if flash was not erased( SCGCQ00951226 ) 
 - Host sees incorrect MSIX value in event reply descriptor	( SCGCQ00952622 ) 
 - RMC firmware fails to handle PCIe Hot Reset and Link Disable/Enable properly which causes system to hang or reboot( SCGCQ00952692 ) 
 - Ventura: Vendor defined PCI messages may cause the adapter to hang during POST( SCGCQ00953758 ) 
 - IOP: Spurious interrupt on Tiger	( SCGCQ00954831 ) 
 - Ventura MSS: A0 DDR bring-up	( SCGCQ00961550 ) 
 - ComboSerdes: AAPL prints warnings about AAPL_CHIP_ID_OVERRIDE upon initialization( SCGCQ00966879 ) 
 - Ventura: A0 - MSI/MSI-X error occurs with PCIe error status of Length Mismatch Error during IO stress( SCGCQ00969312 ) 
 - Ventura: backend PCIe: PL NVMe read/write breakup IOs fail badly	( SCGCQ00983674 ) 
 - Tiger: Silicon build not working with new Tiger CCR header( SCGCQ00987111 ) 
 - Ventura: Actions requiring SysDMA fail when firmware is host booted( SCGCQ00987233 ) 
 - POST fails on some servers with Ventura HBA installed( SCGCQ00989307 ) 
 - Tiger IOP: fix hardcoded device ID( SCGCQ00990350 ) 
 - Ventura: Implement work-around for MSIX Vector Completion Timeout Problem( SCGCQ00990361 ) 
 - Ventura: backend PCIe: hang may occur when a backend PCIe link goes down	( SCGCQ00991209 ) 
 - Ventura: iop show ver displays PLB frequency on Ventura	( SCGCQ00991411 ) 
 - SATA Drives do not link up and SAS/SATA links come up at less than optimal speeds( SCGCQ00991424 ) 
 - IOP updates necessary for DDR4 bringup on Ventura( SCGCQ00991767 ) 
 - Ventura - FW hangs while sending MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST.( SCGCQ00992642 ) 
 - Ventura: Switch to parity initialization work-around and turn on 128 vector support( SCGCQ00992931 ) 
 - Ventura: Fails to initialize with 128 MSIX vectors( SCGCQ00993114 ) 
 - Ventura: Eliminate 12-vector MSIX work-around from code( SCGCQ00993120 ) 
 - Ventura: backend PCIe: ED08 fault occurs with backend PCIe enabled and phys disabled	( SCGCQ00993194 ) 
 - Ventura MSS: Second set of changes for A0 bring up( SCGCQ00993821 ) 
 - Ventura: Invert PBAM GPIO LED data polarity( SCGCQ00993950 ) 
 - Removed unused Ventura library files from Clear Case. Added a new build target, cleanvent, to clear Ventura build objects prior to new build.( SCGCQ00996748 ) 
 - Tiger: Fix POM size( SCGCQ00997088 ) 
 - Ventura A0: Power Management functionality for Partial or Slumber capable SAS or SATA devices not enabled( SCGCQ00997277 ) 
 - The PID_TYPE & PID_PROD fields are not set in the IOC Facts reply message.( SCGCQ00997671 ) 
 - Ventura: recursive fault on fault with backend PCIe support disabled at runtime( SCGCQ00997681 ) 
 - Ventura: Complete firmware download fails with loginfo 0x30010108( SCGCQ00997797 ) 
 - CSW Sequence RAM updated to allow SAS Phy Power Management to work( SCGCQ00997834 ) 
 - Tiger: Invalid Requestor ID is used for PCIe TLPs( SCGCQ00998663 ) 
 - IOP: Remove register definitions that don't actually exist in trident( SCGCQ01001094 ) 
 - Adapter fails to respond to diag reset while faulted	( SCGCQ01001666 ) 
 - Ventura: EC22 fault occurs after a SASCore transmit hardware interrupt( SCGCQ01002020 ) 
 - Ventura/Intruder: SCGCQ00997542 fix to firmware download will fail for non-uniform sectored parts( SCGCQ01002406 ) 
 - Ventura: VPD interrupt repeatedly asserts after PCIe VPD access( SCGCQ01003747 ) 
 - Ventura: Modify configuration of GPIOs shared with Eval Board CPLD	( SCGCQ01004229 ) 
 - Ventura: backend PCIe: fault occurs when link configuration is invalid( SCGCQ01004373 ) 
 - Firmware crashed with PL Fault d073 when running IO on multiple R1 VDs( SCGCQ01004990 ) 
 - Ventura A0: Global Power Management Mode changes not working	( SCGCQ01005088 ) 
 - Tiger: (Veloce( SCGCQ01005095 ) 
 - IOP: Tiger must provide PCI Express Extended Capability Header( SCGCQ01005156 ) 
 - Ventura: SPI Library directly writes to mode registers	( SCGCQ01010624 ) 
 - Ventura: Hardware work-around for Link Capabilities 2 register causes PCE incompabilitiy	( SCGCQ01011070 ) 
 - Ventura: Remove Prevail references( SCGCQ01011088 ) 
 - IB Transfer field changes when Performance Counters are Disabled	( SCGCQ01011954 ) 
 - Tiger FPGA: PCI DID needs to be set to 0xB1 instead of 0xAA for Tiger in config space( SCGCQ01011963 ) 
 - IOP: Reply Queue FIFO is inefficiently divided between MSIx vectors( SCGCQ01014813 ) 
 - Tiger FPGA: Temporarily Fix DevHandle offset in Tiger PCIe FMU register(SCGCQ01014979 ) 
 - Ventura: backend PCIe: couple of issues related to resource configuration( SCGCQ01014981 ) 
 - Ventura PL: Remove deprecated MPI SED Initialization step( SCGCQ01015440 ) 
 - Ventura: Sas/IOA deadlock( SCGCQ01016130 ) 
 - Ventura: backend PCIe: workaround for lane breakage on backend PCIe link down( SCGCQ01017060 ) 
 - Ventura: Ventura and Marlin family parts have 0x0000 for Subsystem ID( SCGCQ01017082 ) 
 - Ventura A0: Performance Counters not working as expected	( SCGCQ01018523 ) 
 - Marlin: backend PCIe: various bringup issues	( SCGCQ01018771 ) 
 - Port Enable fails when 'BoardPowerRequirement' field (Manufacturing Page 11( SCGCQ01019972 ) 
 - Ventura: NVMe: Supported WRITE LONG flags mismatch the current SCSI-NVMe translation spec( SCGCQ01020474 ) 
 - Add memport interrupt handling to the memory controller interrupt handler and make corrections for DDR4 ECC implementation.( SCGCQ01020603 ) 
 - Ventura: Spilib - move declaration before statement( SCGCQ01020718 ) 
 - Ventura: backend PCIe: on disable, need to deconfigure backend PCIe sooner( SCGCQ01021385 ) 
 - Ventura A0: SPILIB: Hang in SpiAPIs( SCGCQ01021422 ) 
 - Tiger: SAS complete mode must use SIL 0 for all completion Q tail pointer writes	( SCGCQ01025327 ) 
 - Ventura PL: Handle secondary path completion interrupt beating completion entry writes( SCGCQ01025621 ) 
 - Ventura A0: Incorrect offset used during GPIO BankB output value initialization( SCGCQ01026167 ) 
 - Ventura: NVMe: SGL translation may fail with unaligned first SGE	( SCGCQ01026995 ) 
 - Ventura: SPI library code fails to write NVram in quad mode for specific NVSRAM part	( SCGCQ01028117 ) 
 - Ventura A0: Performance Counters not working as expected for NVMe drives	( SCGCQ01029636 ) 
 - GHS linker .dba files are missing from the lib folder( SCGCQ01029700 ) 
 - Ventura Tiger: 0x265d Fault while running Task Management Test to tiger attached SATA drive( SCGCQ01032769 ) 
 - Tiger Ventura: Remote MPI device (SED( SCGCQ01032856 ) 
 - Ventura A0: Raw firmware name available under IT folder is different as mentioned in Readme available in nvdata_dat folder.( SCGCQ01033781 ) 
 - Ventura MSS: RDIMM fails to train( SCGCQ01034014 ) 
 - Ventura MSS: Hardware Workaround for DDR refresh during training issue( SCGCQ01034016 ) 
 - Ventura A0: Fault 0x0004 post power cycle after downloading 0.60 firmware( SCGCQ01034069 ) 
 - Ventura A0: Fault 0x0004 post power cycle after downloading 0.60 firmware with Quad Mode	( SCGCQ01035610 ) 
 - Aladin hangs system - wrong clock being selected	( SCGCQ01035864 ) 
 - Ventura: backend PCIe: 61A5 fault on frequent errors involving an NVMe device( SCGCQ01039087 ) 
 - Ventura MSS: ECC improvements for operation at 2133( SCGCQ01039164 ) 
 - Ventura: PL Include Files Result In error ARCH_TYPE not defined( SCGCQ01039167 ) 
 - Fault during Aladin CLI commands.( SCGCQ01040069 ) 
 - Ventura: In SRIOV mode, FLRControl Done Is Not Set when FLR is issued to VF's( SCGCQ01040078 ) 
 - FMU Security is Always Enabled and Can Not Be Turned Off	( SCGCQ01043903 ) 
 - aView EBERT and ESCOPE commands fail via TCP/IP	( SCGCQ01045574 ) 
 - Tiger FPGA: Fault 6230 is seen during IO and TM on direct attached SATA( SCGCQ01045612 ) 
 - Ventura MSS: Update CA parity setup during DDR init	( SCGCQ01046321 ) 
 - Ventura: backend PCIe: EC30 or EC70 fault on direct attached link down( SCGCQ01046534 ) 
 - IOP: Firmware faults with 0x265D when issuing a TM to a device behind a SED which is no longer connected	( SCGCQ01049418 ) 
 - Setting manual trigger of Aladin block causes system lock up.( SCGCQ01050624 ) 
 - Ventura: SPI library - Flash API read missed first 4 bytes in quad mode version	( SCGCQ01051481 ) 
 - Ventura A0: Running all Task Management types to only PCIe devices results in fault 0xECA3( SCGCQ01053437 ) 
 - PL does not map IOP requested resource to backend PCI space with AXI bus attribute and faults( SCGCQ01054900 ) 
 - Host Trace Starting Offset Incorrect if the trace is not released properly( SCGCQ01055030 ) 
 - CPU clock of "iop show ver" command has wrong value.	( SCGCQ01059458 ) 
 - Ventura: 8 LUN Target Using Linux Driver Performs 10% or more slower than previous SAS3 products	( SCGCQ01060022 ) 
 - MPI version noted as 0 during firmware upgrade.	( SCGCQ01060320 ) 
 - Data corruption issues when CA parity enabled.( SCGCQ01061968 ) 
 - Tiger: Improve DPC handling	( SCGCQ01062268 ) 
 - Tiger FPGA: Backup Common Boot Block not loading after reset	( SCGCQ01062712 ) 
 - Ventura: backend PCIe: various faults occur after a short link glitch( SCGCQ01064269 ) 
 - Ventura: Partial NVDATA Chip Comments Wrong for sas3616 and sas3716	( SCGCQ01065944 ) 
 - Using iop xget trace command results in truncated host trace file if the file hasn't been released( SCGCQ01066380 ) 
 - Ventura: Fault 265d during PL initialization - Data abort( SCGCQ01068731 ) 
 - Part Numbers of Some Chips Displayed Incorrectly	( SCGCQ01070188 ) 
 - For NVMe drives mode sense command failed for PAGE CODE=0x3F and SUB PAGE CODE=0xFF	( SCGCQ01070881 ) 
 - Tiger: IOP: The initial setup of the PCI Serial Number is incorrect	( SCGCQ01072983 ) 
 - Marlin MSS: Various MSS updates found during Marlin integration	( SCGCQ01073874 ) 
 - Ventura: Using ALADIN GUI causes firmware 0x265D fault when collecting data.	( SCGCQ01074775 ) 
 - Tiger FPGA: NVMe drive drops off while running a mix of IOs and Task Managements	( SCGCQ01075180 ) 
 - Tiger is not seen from Ventura when dual paths are connected	( SCGCQ01076726 ) 
 - SAS SD Channels are per CSW block( SCGCQ01079052 ) 
 - Ventura: SPI library: SPI library does not detect NVSRAM on customer board that has micron flash	( SCGCQ01080680 ) 
 - Copyright information changed from 2015 to 2016 for NVDATA XML files.( SCGCQ01082212 ) 
 - Copyright header of nvdata xml files was not updated for year 2016( SCGCQ01082305 ) 
 - Tiger IOP: Route FPE started IO completions in firmware to the same path as the data	( SCGCQ01084691 ) 
 - Ventura: SPI library: SPI reset return value is not updated for the good case( SCGCQ01084964 ) 
 - Coverity defect: Constant expression result and Uninitialized scalar variable( SCGCQ01085576 ) 
 - Ventura: SPI library: Firmware fails to find NVDATA during flash scan in this particular flash part( SCGCQ01087673 ) 
 - Wrong sizeof argument usage and Condition check evaluates to TRUE always.( SCGCQ01088276 ) 
 - Uninitialized scalar variable usage.	( SCGCQ01088281 ) 
 - Coverity defect : Identical code for different branches.	( SCGCQ01089366 ) 
 - Ventura MSS: Correct MC Low Power settings( SCGCQ01089518 ) 
 - Tiger FPGA: Tiger timers are not accurate( SCGCQ01090040 ) 
 - Constant expression result always true( SCGCQ01092130 ) 
 - UART becomes unresponsive after hitting fault.( SCGCQ01093705 ) 
 - Ventura: comboserdes lib build all failure( SCGCQ01095056 ) 
 - Controller name not correct in HII( SCGCQ01095662 ) 
 - Ventura: 9400-8i/16i SGPIO Clock Signal Issue	( SCGCQ01105971 ) 
 - ComboSerdes: Function definitions for diagnostic functions are no longer visible to the expander SDK.( SCGCQ01109384 ) 
 - Marlin A0: Fault 0xEC30 while running NAKIncomingTLP-ModDataFCUpdate.jas script or link breaking	( SCGCQ01109436 ) 
 - Ventura: StorCLI timeouts while using Boot loader Cleantool to perform erase-all request	( SCGCQ01109588 ) 
 - ComboSerdes: Linker reports missing symbols	( SCGCQ01111993 ) 
 - Ventura: backend PCIe: add workaround for link recovery issue( SCGCQ01114258 ) 
 - Ventura: Endianess of MCTP Header word is incorrect	( SCGCQ01116031 ) 
 - Marlin MSS: Problems running dual rank( SCGCQ01117222 ) 
 - Aladin trigger causes firmware hang	( SCGCQ01117415 ) 
 - Ventura: Update RMC chip reset interrupt sequence.( SCGCQ01118899 ) 
 - Ventura MSS: Memory Controller pre-initialization settings need corrected.( SCGCQ01119681 ) 
 - Marlin MSS: Update some MC registers based on differences in new Cadence specification.( SCGCQ01122982 ) 
 - Ventura: make the FPE debug prints with timestamps consistent( SCGCQ01125471 ) 
 - Ventura: Controller hangs during heavy event logging	( SCGCQ01129539 ) 
 - Marlin A0: 0xD101 fault while issuing a full link break( SCGCQ01131880 ) 
 - Ventura/Marlin: backend PCIe: work around a link down issue( SCGCQ01134422 ) 
 - Fault xD060 seen when doing NVME glitching( SCGCQ01134928 ) 
 - Ventura RMC: Add capability to execute HW Workarounds at runtime based on chip revision.	( SCGCQ01136272 ) 
 -	( SCGCQ01137191 ) 
 - pl: backend PCIe: direct attached NVMe device may go missing after a port glitch	( SCGCQ01139383 ) 
 - Ventura: Make IOP_PCIE_FALSE_MSGUNIT_PARITY_ERR_WRITETHR_WORKAROUND dynamic( SCGCQ01139693 ) 
 - IOP: MCTP: MCTP Control Header was broken( SCGCQ01140942 ) 
 - IOP: MCTP: PCIe message hardware changes between products( SCGCQ01143327 ) 
 - Ventura: IT Bootloader Uses Wrong FLASH Layout and Faults( SCGCQ01144270 ) 
 - ventura: boot loader toolbox clean commands fail	( SCGCQ01144476 ) 
 - Incorrect Receiver EQ values are used in the enter bypass operation( SCGCQ01144500 ) 
 - Marlin: backend PCIe: NVMe devices in SFF-8639 JBOD may not be discovered( SCGCQ01145020 ) 
 - Ventura: NVME enabled partial nvdata with ACM still has old I2C controller numbers( SCGCQ01145049 ) 
 - BL/IOP: Marlin and Mercator not identified as unique products( SCGCQ01147332 ) 
 - PL: Overtemp LEDs not illuminating when thresholds are exceeded( SCGCQ01147743 ) 
 - Ventura: HostBoot fails with .75 release when board has blank flash( SCGCQ01148158 ) 
 - Ventura: SPI library: Flash write status ready check is using byte mask( SCGCQ01149967 ) 
 - Ventura: Firmware does not fault on some PCE errors( SCGCQ01152191 ) 
 - Added new PL fault code and also set default 60 secs for SATA hinting timer in PL( SCGCQ01152796 ) 
 - Marlin/Ventura: backend PCIe: various faults may occur if a link goes into recovery( SCGCQ01154122 ) 
 - DPA offset for Mercator is incorrect resulting in DPA functionaly not functioning( SCGCQ01154524 ) 
 - Ventura RMC: Add staggering of reset release to HW workaround for Hot Reset Link Regression.(SCGCQ01154562 ) 
 - IOP: MCTP: Wrong number of bytes received( SCGCQ01156025 ) 
 - Ventura: Firmware Faults with 0x2622 IFAULT_IOP_PCI_EXPRESS_ERROR_2( SCGCQ01158816 ) 
 - Marlin: DPA Changes Cause Mercator and Marlin to fail on PCE	( SCGCQ01159087 ) 
 - SPI library: Controller hangs during back ground operations.	( SCGCQ01161736 ) 
 - Ventura: DPA capability code causes Marlin family to fail on PCE	( SCGCQ01162151 ) 
 - Fault 0x4311 while running Target Mode IOs with Diag reset on Ventura( SCGCQ01163785 ) 
 - ComboSerdes: Hardware workaround for training failure( SCGCQ01164280 ) 
 - Update certain timing parameters for Dual Rank CA parity enabled configuration.( SCGCQ01164593 ) 
 - Ventura A0: Fault 0x1500 on Ventura A0 with tip code	( SCGCQ01165688 ) 
 - Ventura/Marlin: NVMe: completion queue head doorbell may not be written in a couple of error cases( SCGCQ01170592 ) 
 - With Spico version 0x1069 SAS links do not come up on Ventura( SCGCQ01171096 ) 
 - Ventura RMC: Implement new AVSO algorithm based on measuring Kp and leakage from EFuse.( SCGCQ01171316 ) 
 - Ventura: Firmware Upload COMMON_BOOT_BLOCK and CBB BACKUP return INVALID FIELD( SCGCQ01173710 ) 
 - Ventura: NVDATA XSD files have A0 in filename but apply to all revisions	( SCGCQ01173959 ) 
 - Host trace buffer does not contain expected data	( SCGCQ01174473 ) 
 - Ventura: SPI program is failing with small chunks of data( SCGCQ01175718 ) 
 - IOP: Intruder and Ventura PCIe hardware register names don't match( SCGCQ01176065 ) 
 - Starting Task Managements take a long time in certain conditions	( SCGCQ01176191 ) 
 - Ventura: B.0 Link Regression test failures on various systems.( SCGCQ01176840 ) 
 - Ventura RMC: Function Level Reset on OEM server fails after about 30,000 iterations	( SCGCQ01182485 ) 
 - Ventura RMC: Add staggering of reset releases to workaround issues with Hot Reset Link Regression.( SCGCQ01183501 ) 
 - SAS link resets sometimes fail( SCGCQ01185511 ) 
 - Unusual prints observed in debug console with Cutlass HBA while booting( SCGCQ01185627 ) 
 - Ventura: 9400 16i/8i boards XML doesn't have data setup for Sgpio config( SCGCQ01186085 ) 
 - Ventura NVDATA: ManPage13 (SGPIO	( SCGCQ01186241 ) 
 - UART command iop pci reg will cause fault 26B5 on Cutlass( SCGCQ01186359 ) 
 - IOP: Fix Aero build issues( SCGCQ01186963 ) 
 - Set Serdes Tx Eq values.	( SCGCQ01188034 ) 
 - Ventura: backend PCIe: link recovery issues( SCGCQ01188928 ) 
 - Ventura: SBR Reload workaround needs A15 firmware to set flag to indicate when RMC code should be reloaded.( SCGCQ01190075 ) 
 - Ventura/Marlin: resolve some undesired usages of the PL PCIe device support enable macro	( SCGCQ01191830 ) 
 - Ventura B0: Drive/Drives getting removed when running port reduction between HBA and expander( SCGCQ01196175 ) 
 - Ventura: SPI library: Macronix 32 MB flash fails to write upper 16MB in quad mode fails( SCGCQ01196202 ) 
 - CSW: SAS/PCIe dwell times and interrupt sequence modification for HW Cycling mode( SCGCQ01198294 ) 
 - Ventura RMC: Improve SysLite interrupt handling.	( SCGCQ01198340 ) 
 - pl: Unexpected SAS link operation with protocol cycling enabled( SCGCQ01198352 ) 
 - PL: Incorrect phy resets	( SCGCQ01199063 ) 
 - TX and RX train failures cause drives to link up at reduced rate	( SCGCQ01200626 ) 
 - SAS Power Management and PCal do not work together( SCGCQ01201827 ) 
 - Ventura B0: Seen 4311 Fault during lane break between HBA and the Capella switch	( SCGCQ01202315 ) 
 - Ventura: backend PCIe: various issues may occur if multiple switches have the same Device Serial Number	( SCGCQ01202401 ) 
 - Ventura B0: Expander goes missing when running port reduction between HBA and expander	( SCGCQ01205651 ) 
 - ROC-based IT boards won't power cycle or hot-plug( SCGCQ01207488 ) 
 - Ventura MSS: Dual rank VREF training results are 0x0D for all datapaths.	( SCGCQ01209224 ) 
 - ROM Bar Enable Bit set at boot time	( SCGCQ01211781 ) 
 - Ventura fails SAS Rx Training on Fast Silicon( SCGCQ01212572 ) 
 - Ventura/Marlin: The IOC exceptions bit 10 is set when backend PCIe was intentionally disabled( SCGCQ01213460 ) 
 - CSW: Compilation Error( SCGCQ01215027 ) 
 - Ventura B0: IO's stop to the drive with Fast Path Disabled and IOP RESET Disabled on the Controller( SCGCQ01218828 ) 
 - Targets attached to Quads 1 and 2 via active cable are not discovered on 9400-8e board.( SCGCQ01220915 ) 
 - Channel HBAs connector names are not unique	( SCGCQ01221189 ) 
 - Ventura: backend PCIe: link recovery testing issues	( SCGCQ01222761 ) 
 - Ventura: MCTP Storelibtest GetTopologyInfo causes a 0x265D fault	( SCGCQ01222778 ) 
 - Valid read eye window reported during initddr read leveling varies significantly on subsequent inits.( SCGCQ01230813 ) 
 - Marlin/Mercator: Marlin B.0 has unexpected initial Chip ID and Rev ID( SCGCQ01230921 ) 
 - Sas drives will not train after an NVMe drive is inserted then removed( SCGCQ01231705 ) 
 - Untimed busy wait during small data transfers( SCGCQ01233445 ) 
 - PCIe IO Unit Page 0 UART dump contains extra data than desired( SCGCQ01235005 ) 
 - Setting a common failure ISTATUS_IOP_FLASH_ERASE_FAILED for all the errors returned from Flash erase API	( SCGCQ01236701 ) 
 - Ventura: Hardware fails to load PCE SPICO if only the checksum is bad on SPICO SBR( SCGCQ01237819 ) 
 - SSC Profile and PLL BW Selection	( SCGCQ01243603 ) 
 - Cfgi library zeroed a shared scratch buffer( SCGCQ01248946 ) 
 - Change channel Tri-mode HBAs SGPIO frequency to 8.15KHz	( SCGCQ01250841 ) 
 - Create interface to adjust settings to improve Ventura Jitter( SCGCQ01250904 ) 
 - GoldenX does not create appropriate flash ROM image when two OpROMs (Legacy and UEFI	( SCGCQ01250935 ) 
 - Maxim regulator MFR_ID has changed, requesting official Mercator support for new MFR_ID="MA"	( SCGCQ01258257 ) 
 - Ventura B0: ManPage 9 Runtime configurations for Number of Virtual functions set to 16( SCGCQ01258786 ) 
 - Ventura/Marlin: backend PCIe: link not reinitialized after certain errors( SCGCQ01259639 ) 
 - Fault 0xECA0 is hit while running IOs on NVMe drives behind Ventura( SCGCQ01266097 ) 
 - PCI SIG PCIECV Compliance Test Failures (Non-Sticky Sticky bits( SCGCQ01268646 ) 
 - Ventura/Marlin: backend PCIe: completion timeout disable support failure( SCGCQ01269306 ) 
 - CSW: Modify 12g Tx settings( SCGCQ01272665 ) 
 - Firmware download failing when CPU speed reduced to 50%.	( SCGCQ01274688 ) 
 - Ventura: backend PCIe: improper interrupt control by workaround( SCGCQ01284095 ) 
 - HVD6 SERDES 3G/6G Attenuation Settings( SCGCQ01286488 ) 
 - Incorrect Copyright Information in NVDATA files	( SCGCQ01287001 ) 
 - Phase 3 Ventura FW doesn’t have NVMe Enabled NVDATA for 9405W-16e card( SCGCQ01288565 ) 
 - Ventura B0:9405W-16e:2 Phys of Quad are down when connected to an Expander via Active Cable( SCGCQ01288856 ) 
 - CSW: 4311 fault and 12g Rx Train timeouts( SCGCQ01288966 ) 
 - pl: backend PCIe: E984, E9A4, EF50, EF52 faults( SCGCQ01294948 ) 
 - Cutlass card is not detecting in SLOOB( SCGCQ01299390 ) 
 - CSW Library REF2 interrupt sequence is using the REF1 sequence length( SCGCQ01300905 ) 
 - Ventura/Marlin: backend PCIe: excessive supported switch count( SCGCQ01306811 ) 
 - More latency observed during device discovery( SCGCQ01311662 ) 
 - pl: backend PCIe: ECE4 fault	( SCGCQ01312345 ) 
 - Ventura/Marlin: backend PCIe: EC56 fault on link glitch	( SCGCQ01313075 ) 
 - Ventura/Marlin: build process performance improvement( SCGCQ01313151 ) 
 - Cutlass card is not detecting in SLOOB( SCGCQ01316544 ) 
 - Due to a timing issue a hang condition may occur on cold power up( SCGCQ01316806 ) 
 - (SATA Only( SCGCQ01317046 ) 
 - Design changes update on NVME drive hotswap feature and updating more changes( SCGCQ01319426 ) 
 - pl: NVMe: unexpected IO failures with firmware path read/write IOs to an NVMe SGL device	( SCGCQ01321013 ) 
 - pl: backend PCIe: specific vendor NVMe device does not appear to host software( SCGCQ01328743 ) 
 - SATA only drives getting removed when running SATA Passthorugh with incorrect data length along with IOs	( SCGCQ01329382 ) 
 - Corrected PORTERR debug print parameter size	( SCGCQ01329812 ) 
 - Ventura: Task Management to NVMe drives may not complete	( SCGCQ01330747 ) 
 - 0x6001 Fault due to a missing IO that went through the IO resubmit path	( SCGCQ01330777 ) 
 - Ventura: Detect invalid BP_TYPE types in VPP backplane Mgmt connector group	( SCGCQ01332062 ) 
 - Fixed SAS cleanup code to skip the PCI device instances.	( SCGCQ01332893 ) 
 - PL: SAS Notify Primitive Event not sent	( SCGCQ01332956 ) 
 - Task Management request of Abort Task to an NVMe device completes with failure status if the target of the Abort is not a currently active IO from the controller's point of view	( SCGCQ01334586 ) 
 - pl: NVMe: excessive NVMe init retry count if a serious PCIe error occurs	( SCGCQ01334997 ) 
 - Marlin B0: backend PCIe: EC6D fault on link glitch( SCGCQ01336021 ) 
 - Ventura IOP: VDM workaround bug fixes( SCGCQ01337547 ) 
 - ATA Passthrough MPT frame content has overwritten( SCGCQ01339127 ) 
 - Ventura: NVDATA option to ignore BP_TYPE check and force enable PCIe RefClk for NVMe backplanes( SCGCQ01349247 ) 
 - pl: NVMe: missing AccessStatus codes	( SCGCQ01352937 ) 
 - Fault 0x265d when posting target mode command buffers( SCGCQ01358077 ) 
 - NVMe-enabled firmware fails to host boot on a blank board( SCGCQ01358750 ) 
 - Fix dmDiagCmd( SCGCQ01367240 ) 
 - MR 7.4 - Mapping slot to targetID incorrectly( SCGCQ01368450 ) 
 - PL Fault 0000d073 LR 7f86abb5 during drive clear operation.( SCGCQ01368862 ) 
 - pl: NVMe: 6001 or E411 fault during task management( SCGCQ01371965 ) 
 - NVMe: ErrorResponseCount always equals ErrorResponseAllocationLength	( SCGCQ01373178 ) 
 - Ventura SBR: Changes to PLL reset requirements cause lock failure on some boards	( SCGCQ01373888 ) 
 - Ventura B0: 9400 IT Channel product firmware detecting memory read error during bootup( SCGCQ01375470 ) 
 - pl: backend PCIe: EC56 fault	( SCGCQ01376222 ) 
 - Assertion failure in ../../raid/log.c at line 2584: (code( SCGCQ01377047 ) 
 - NVDATA with changes in MR_PARAMS_PAGE0 upgrade does not take effect if personality is changed at least once by user.( SCGCQ01383923 ) 
 - Doorbell handshake hangs when faulted( SCGCQ01384089 ) 
 - Ventura BST 7.4==>Running I/O then PD pull and insert back hit MonTask: line 342 in file ../../raid/taskman.c rst=0( SCGCQ01384216 ) 
 - Ventura: FW may fault with 265D when attached to OEM NVMe backplane( SCGCQ01385700 ) 
 - Ventura 7.4 : Global divert counters does not get decremented to 0( SCGCQ01388033 ) 
 - Duplicate Event for Patrol Read Properties Change was removed( SCGCQ01389161 ) 
 - IOP: Improvements to AXI HWWA( SCGCQ01390095 ) 
 - storclif64 7.401.0.0: missing print telling user to reboot system after profile change( SCGCQ01390941 ) 
 - Drive model description missing on all SATA drives after changing to JBOD personality( SCGCQ01391694 ) 
 - Ventura B0: Missing signing supported firmware image in RO( SCGCQ01392675 ) 
 - pl: NVMe: reset types for some TM types mismatch MPI	( SCGCQ01392812 ) 
 - PCI SIG Compliance Test Failure - Test 1_8 Virtual Channel( SCGCQ01394426 ) 
 - PCI SIG Compliance Test Failure - Test 1_28 VPD Failure	( SCGCQ01394461 ) 
 - PCI SIG Compliance Test Failure - Test 1_41 Link Capabilities 2, Link Control 2, Link Status 2 Failures(SCGCQ01394478) 
 - Fix static code analysis tool detected defects	( SCGCQ01394714 ) 
 - MR_FW: Descriptor Format (DESC( SCGCQ01395709 ) 
 - MR7.4 PA2 8G Harpoon-8i JBOD mode: KA on target reset in a loop(SCGCQ01395837) 
 - Host TM : Cleanup the host dcdb timer code( SCGCQ01397478 ) 
 - Customer specific SAS 12g drive frequently links up at 6g.( SCGCQ01397553 ) 
 - vSES Target: Incorrect Enclosure Status Diagnostic Page Data for RECEIVE DIAGNOSTIC RESULTS with PAGE CODE=0x02( SCGCQ01397780 ) 
 - Ventura vSES : Various SCSI Commands to vSES target are not handled as per specifications.( SCGCQ01398992 ) 
 - Exception Stack Frame: FE705FC0" observed during OS boot	( SCGCQ01399366 ) 
 - MR 7.4 - VMWare 6.5 is not detected any partition at all after flashing to the latest ROP( SCGCQ01399718 ) 
 - Tast Abort Escalation Exception fix.	( SCGCQ01400118 ) 
 - Ventura BST 7.4 PJbod==> PD pull/insert hit MonTask: line 151 in file ../../raid/span.c rst=0( SCGCQ01400368 ) 
 - DeviceId in HostDcdbCallback is poulated incorrectly for JBOD personality( SCGCQ01400597 ) 
 - MR-7.4-PreAlpha: Controller not found after 1st TM on one EPD via debugger with "call DmTmPdTest devId 0" (RHEL 7.3 x64( SCGCQ01402358 ) 
 - MR 7.4 - Reinserted EPDs hit Exception mon_task	( SCGCQ01402849 ) 
 - NVMe drive discovery fails after pull/push on customer specific NVMe supported backplane	( SCGCQ01404209 ) 
 - The Avoid Duplicate Mid feature does not activate properly for expander attached SATA devices( SCGCQ01405083 ) 
 - Fix for DCMD target Reset regression from previous Task Abort escalation fix.( SCGCQ01405360 ) 
 - Ventura BST 7.4 PJbod==> Running I/O, OCR, and pull/insert PD hit MonTask: line 342 in file ../../raid/taskman.c rst=0( SCGCQ01406247 ) 
 - pl: NVMe: invalid Target Reset Method values should cause TM failure	( SCGCQ01406400 ) 
 - [PL]Ventura MR 7.5 - PL 00005851 hit while issuing OCRs with IO	( SCGCQ01406527 ) 
 - MR 7.4 - FW hit KA while I/Ong across all VDs( SCGCQ01406832 ) 
 - Ventura : Linux driver logs message, exp sasaddress is improperly printed when sas device discovery error event occurs( SCGCQ01406980 ) 
 - Performance drop in HDD Seq. Write up to %57	( SCGCQ01409242 ) 
 - Controller Fault (PL FaultCode = 00005805( SCGCQ01411046 ) 
 - MR 7.4 - Hitting DC after OCR on 240 EPDs( SCGCQ01412665 ) 
 - MR 7.4 pkg628 JBOD personality found SAS SSD pd as UnconfigBad after a cold boot( SCGCQ01412718 ) 
 - pl: NVMe: async event persistent conditions monitor issues( SCGCQ01414966 ) 
 - Internal Task Management operations not completing in out of resource conditions	( SCGCQ01415544 ) 
 - Ventura vSES: Protocol ID of additional element status page (0x0A( SCGCQ01416380 ) 
 - 0x6004 Fault during TM injection while running IO to Sata SSDs.( SCGCQ01416481 ) 
 - MR7.4: MFC subDeviceID changed from 9A60 to 9460 after FW flash in JBOD personality( SCGCQ01416483 ) 
 - When disabling one phy of a port the other phys of the same port do not relink after reset.	( SCGCQ01418575 ) 
 - When PFA drive is attached, it does not show predictive failure is detected.	( SCGCQ01420232 ) 
 - SPI Lib: SPI flash sector erase is taking to long.( SCGCQ01420695 ) 
 - BST 7.4 PJbod==> Pull/Insert 4 drives, but there is only one drive converted to EPD.	( SCGCQ01420781 ) 
 - MR 7.4: Drives become UBAD when reboot server( SCGCQ01422408 ) 
 - MR7.4: Found IOs drop while running Multipath cable pull 5min interval in linux( SCGCQ01422413 ) 
 - MR74 PA2: PD dropped on cable pull/push overnight( SCGCQ01422763 ) 
 - MR-7.4-PreAlpha: Intrusive FW debug messages when issuing "storcli /c0 show" in pkg 672( SCGCQ01422869 ) 
 - Change XSD major version to encode the phase, this avoids 7.3 NVDATA major version catch with 7.4 NVDATA major version number( SCGCQ01425178 ) 
 - IO failure( SCGCQ01427327 ) 
 - Change profile to 22 and reboot server hit Assertion failure	( SCGCQ01427332 ) 
 - 9405W-16i xml not available in Latest Release Order( SCGCQ01429439 ) 
 - iMR - Performance degrade at IO size greater than strip size - for Sequential Writes	( SCGCQ01430732 ) 
 - pl: Mode Select translation transfer length validation( SCGCQ01435884 ) 
 - 7.4 Alpha, restore controller defaults Cn causes a Montask( SCGCQ01437169 ) 
 - BSt Ventura 7.5 Profile21==> Set Drive Offline Failed.( SCGCQ01437184 ) 
 - storcli enabling of autoPdCache cmd caused firmware hitting exception( SCGCQ01437667 ) 
 - Increase the number of DMA frames for Profile 23	( SCGCQ01439382 ) 
 - MR 7.4 : firmware Discovery is not completed once in a while (across multiple Reboots( SCGCQ01439708 ) 
 - MR 7.4 : Configuration Loss Message displayed while moving from JBOD-> RAID with Logical disks.	( SCGCQ01439807 ) 
 - MR 7.4 : KA when run SG_RESET with EPD( SCGCQ01440421 ) 
 - SGPIO Clock driven Low on host PCIe reset assertion causing SGPIO target to latch on invalid data( SCGCQ01440481 ) 
 - MR 7.4 Crusader pkg705 while IO on VDs and JBODS then cablepull/push hit :Assertion failure in ../../dm/src/dm.c at line 1492( SCGCQ01440486 ) 
 - Ventura B0: Fault 0x510B while doing reboot test along with IOs & TMs( SCGCQ01440764 ) 
 - Spare filtering does not prevent NVMe PD from being used as spare for SAS/SATA array.( SCGCQ01441173 ) 
 - Disable user option to modify Multi Init/ SES Management/multiPath feature.	( SCGCQ01441181 ) 
 - MR7.4 HII shows enter your input when FW sets waitForKey bit	( SCGCQ01441329 ) 
 - Ventura FW packages need to be block the configuration of MFC settings from Megamon( SCGCQ01442546 ) 
 - MR 7.4 : Foreign import with Pinned Cache is failing and import successful after deleting pinned Cache.( SCGCQ01442565 ) 
 - HW Workaround:The PCIe host logic may incorrectly propagate a received ECRC error( SCGCQ01443186 ) 
 - 74AlphaPK720fw946: Slot order emumeration incorrect( SCGCQ01445001 ) 
 - Due to a bug in Serial Boot Loader (SBL( SCGCQ01446234 ) 
 - Restore enclosure topology info( SCGCQ01446265 ) 
 - MR7.4: Assertion Failure during cable-pull on dual path enclosure with EPD/VD I/O.( SCGCQ01446552 ) 
 - WG: LSA does not reflect requested personality in advanced controller properties, while moving from JBOD to raid	( SCGCQ01446799 ) 
 - MR7.4: FW hit Assertion failure in ../../dm/mpt2/mptframe.c at line 1247: mptIo!=NULL while IOs on 240LDs + Jbods( SCGCQ01447317 ) 
 - Fw/storcli need to hide profile 22 in jbod mode.	( SCGCQ01447393 ) 
 - 74Alphapk740fw957: Error restore cache while powercycle system for COL H740 Dell CTRL( SCGCQ01447514 ) 
 -	( SCGCQ01447767 ) 
 - GoldenX: When no BIOS option is selected the images are 1MB too small( SCGCQ01448015 ) 
 - Fix DM_PL_ProcessDiscoveryLinkStatus call in MptHandlePCIETopologyChgEvnt( SCGCQ01448310 ) 
 - WG: JBOD drive only lists operations start/stop locate after it were moved from online->offline and viceversa. Profile ID: 20( SCGCQ01448681 ) 
 - Ventura: NVMe : Log Sense Command Executed for Information Exceptions Log Page has TSD field set to 0b( SCGCQ01448752 ) 
 - A previous code change is missing a few changes.( SCGCQ01449239 ) 
 - MR RAID-mode profile 10 create vd cause pds for that vd offline( SCGCQ01450092 ) 
 - MR 7.4 - Not all reinserted PDs got detected that causing auto rebuild failed to start( SCGCQ01450215 ) 
 - MR 7.4 - FW hit KA while simulating multipath-cablepull( SCGCQ01450228 ) 
 - Fixing interrupt release in flash init code.	( SCGCQ01450387 ) 
 - PL trying to perform memory move using address which is in the non-addressable range	( SCGCQ01450399 ) 
 - pl: backend PCIe: link may fail to come up after link break	( SCGCQ01451278 ) 
 - megaraid firmware hangs on flash downgrade. issi flash, bristol board. going from fw SCGCQ01449686, downto fw SCGCQ01428525.	( SCGCQ01451327 ) 
 - Code size overflowed IOPATH section.	( SCGCQ01451888 ) 
 - MR 7.4 : Personality change from RAID to JBOD is successful on NVMe system.( SCGCQ01451959 ) 
 - For SATA SSDS, Enclosure ID is not showing.	( SCGCQ01452046 ) 
 - MR 7.4 - COL hit Assertion mon_task	( SCGCQ01452209 ) 
 - Initialize a larger part of MSIX vectors	( SCGCQ01452321 ) 
 - StorCli autoPdCache command does not create R0 LD from UNCONFG drives automatically	( SCGCQ01453911 ) 
 - Defect to track comments/defects from the review of ENH REQ SCGCQ01451570( SCGCQ01454633 ) 
 - pl: port enable may fail to complete if an OEM backplane is attached	( SCGCQ01455680 ) 
 - (VSES	( SCGCQ01458388 ) 
 - MR 7.4 - FW hit KA mon_task while simulating multipath FO( SCGCQ01458826 ) 
 - Assertion failure in ../../raid/taskman.c at line 342 while running TM sg_reset on SATA drives( SCGCQ01459626 ) 
 - Build script needs some prints to debug issue( SCGCQ01459659 ) 
 - MR 7.4 - PDs pull/push led to "Assertion failure in ../../cpu/arm/exceptions.c at line 938: 0"( SCGCQ01460017 ) 
 - Unmap capability checks should be done during hotspare commission not selection( SCGCQ01460055 ) 
 - Block threshold values were not set to optimal values( SCGCQ01460767 ) 
 - MR 7.5 ver 4.052 LSA does not have option to set/clear Transport Ready( SCGCQ01462694 ) 
 - Hot plugged NVMe drive fails to link up on OEM backplanes with ISTWI drive presence polling enabled( SCGCQ01463496 ) 
 - Move OOB Method Info from dynamic section to static section of NVRAM.( SCGCQ01464123 ) 
 - pl: NVMe: issues related to port enable completion( SCGCQ01464247 ) 
 - Updating from MR 7.1 to MR 7.4 FW package, with R5 and R6 in WT mode, after pulling and restoring power to system - cache data is lost.( SCGCQ01465056 ) 
 - Ventura: Firmware Update Algorithm Frees Mids Twice (SCGCQ01465058 ) 
 - Unmap is getting disabled on first VD after rebuild is complete with sliced VD's in drive group.	( SCGCQ01465788 ) 
 - MR7.4: Bios reports VDs missing at post during system reboot when CTRL in JBOD mode	( SCGCQ01466003 ) 
 - MR7.4: BIOS reports system has more than 256 disk devices when CTRL has less than 230 PDs in multipath( SCGCQ01466006 ) 
 - MR 7.4 : System hangs with continous DDF_CFG_ERR_BAD_VD_COUNT error messages when stocli show with foreign config on iMR	( SCGCQ01466568 ) 
 - Ventura BST 7.5(iMr	( SCGCQ01467132 ) 
 - Add new nvram variable to save the reset type( SCGCQ01467141 ) 
 - Firmware crash when format drive to PI support( SCGCQ01467357 ) 
 - Change version string to reflect 7.5	( SCGCQ01467368 ) 
 - To support the I2C bus reserve state in the case of UBM backplane( SCGCQ01470385 ) 
 - MR7.4: HDD global fault LED is not working for iMR controller (no LED lit up	( SCGCQ01470797 ) 
 - Ventura VSES: Incorrect data in diagnostic page 0xA when drive is missing but not yet removed.( SCGCQ01472941 ) 
 - To check if NVRAM changes related to upgrade/downgrade issue is present( SCGCQ01473186 ) 
 - Double Medium (ref tag( SCGCQ01474084 ) 
 - The "pl reg" command dumps the wrong amount of data for some structures.	( SCGCQ01474266 ) 
 -	( SCGCQ01475119 ) 
 - MR7.4: PDs going into Shield/Failed state during during cable-pull on dual path enclosure with EPD/VD I/O.( SCGCQ01475138 ) 
 - Update OOB_METHOD_INFO_NVRAM to fix compile issue( SCGCQ01475161 ) 
 - Assert can occur when applying iButton/iButtonless Licensing settings that is typically done in a manufacturing environment.	( SCGCQ01476342 ) 
 - PL: SATA: Sense Key/Additional Sense code incorrectly set when open zone issued on a Security locked SMR drive( SCGCQ01478037 ) 
 - MR 7.5: DISM hang during bootup with SSD disks connected	( SCGCQ01478082 ) 
 - Intel MR7.4 Unable to set RAID profile 11 & 12 (ROP 820 and newer affected( SCGCQ01478714 ) 
 - the multi-init multi path change are not support	( SCGCQ01478725 ) 
 - Ventura B0: Controller Reset causing OS hang and resets( SCGCQ01480987 ) 
 - Fix merge issues while delivering to 7.5	( SCGCQ01481168 ) 
 - Additional changes needed for SCGCQ01470741: 930-16i Cannot Spinup HDD During System Power On.( SCGCQ01482688 ) 
 - MPI SEP request to Slots with invalid SES Page 0A element index may not complete	( SCGCQ01482937 ) 
 - Skinny build failed	( SCGCQ01483001 ) 
 - Revert - SCGCQ01465056 MR7.4: Upgrade from MR7.1 to MR7.4 cache data loss.( SCGCQ01483182 ) 
 - pl: NVMe: improved fix for 6001 fault( SCGCQ01484382 ) 
 - pl: 265D fault on 'pl dbg' before port enable( SCGCQ01485059 ) 
 - Ventura/Marlin: Firmware Download does not protect user from downgrading to firmware that does not support Winbond( SCGCQ01485441 ) 
 - Host application hangs waiting for completion of IO issued after NVMe device is removed( SCGCQ01486695 ) 
 - MR7.4 Beta: Direct Attached SAS HDDs go Unconfigured Bad at Power-On (ROP 834 & earlier is OK( SCGCQ01487263 ) 
 - PL: Modify internal structures( SCGCQ01487864 ) 
 - Intermittent Update firmware failed with M0 using EFI StorCLI( SCGCQ01487866 ) 
 - Global HDD LED may not indicate IO activity for NVMe or SAS drives( SCGCQ01489030 ) 
 - Code Unstable in Common_Main, Re definitions of Macro IOP_TIMED_CONDITION, consolidating them.( SCGCQ01489981 ) 
 - OOB SLT get errror when getting send, getobjstatus and getttylog.( SCGCQ01491291 ) 
 - 0x7C41 Fault doing IOs and Task Managements on a mixed SAS/NVMe topology.( SCGCQ01494379 ) 
 - pl: SATA: port enable may time out on spinup failure	( SCGCQ01496842 ) 
 - IOP MCTP: Changes missing from a previous code change( SCGCQ01497080 ) 
 - Aero (Talladega( SCGCQ01498117 ) 
 - Ventura FW may fault on single bit correctable ECC errors in IOA Local RAM( SCGCQ01503262 ) 
 - Can not change the profile back to "A" once you are in profile "B" and flash the controller to FW that does not support NVMe	( SCGCQ01503509 ) 
 - Fixing coverty defects 19848 & 19838	( SCGCQ01504066 ) 
 - pl: backend PCIe: LTSSM state wait during hot reset( SCGCQ01504310 ) 
 - New Event required for individual PD PR completion( SCGCQ01504936 ) 
 - Ventura: Slot LEDs on SGPIO based backplane may not blink( SCGCQ01505392 ) 
 - MR7.3.1 : controller reset seen while importing 32 VD foreign config	( SCGCQ01506874 ) 
 - MR7.5: Firmware asserted at ddf/ddf.c at line 1377: ld == vdRec->Populated_VDEs when insert NVMe drives( SCGCQ01509362 ) 
 - (SATA Only( SCGCQ01509632 ) 
 - Intel S2600WF System Drive Activity LED Stays On w/ Columbia Dunes (9460-8i( SCGCQ01511995 ) 
 - MR7.5: Firmware hang during power up after power failure with COL( SCGCQ01516975 ) 
 - FW incorrectly reports LD unit attention pending irrespective of the scsi op code( SCGCQ01518712 ) 
 - Information on cfgi dump of SASIoUnitPage1( SCGCQ01522331 ) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2( SCGCQ01522342 ) 
 -	( SCGCQ01522627 ) 
 - Firmware hangs due to DISM not completing( SCGCQ01525140 ) 
 - Win, MR 7.5 ROP 970 , R0, 16DC 12G-SAS HDD shows, 9% to 10% SW performance drop at 4k at QD16( SCGCQ01529277 ) 
 - SR, RR, and OLTP regressions up to -90% on 24 Single Drive R0 Config	( SCGCQ01531736 ) 
 - Win/Lin MR7.5 ROP 970,RAID5,%5 to 12% OLTP performance issues at QD1 & R5\R6 QD64 (all IOsizes( SCGCQ01532879 ) 
 - Stark system hangs during the reboot test at boot.( SCGCQ01548923 ) 
 - MR7.5: Firmware asserted during cable pull with IO on JBODs and taskmgmt reset( SCGCQ01555097 ) 
 - OOB slt can not see the imr controller( SCGCQ01561552 ) 
 - After VD erase, In the Action menu, It is not changing from Stop Erase to Erase( SCGCQ01561897 ) 
 - Issue: JBOD devices were dropped after unloading driver and reloading driver in linux( SCGCQ01566087 ) 
 - Change UNMAP support from enable to disable( SCGCQ01566954 ) 
 - pl: backend PCIe: 4311 fault (part 3	( SCGCQ01571588 ) 
 - 9440-8i card: drop out UG drive, error LED always ON. Error LED turns off only upon reinsertion of the drive.( SCGCQ01577475 ) 
 - sysDMA attempted on core1 cause FW to choke( SCGCQ01583517 ) 
 - pl: backend PCIe: ED8D fault	( SCGCQ01628411 ) 
 - MR7.5 18B CIT : if connection to EKMS is lost while online, drives are not in proper state after reboot( SCGCQ01670320 ) 
 - Inconsistent CC progress % is logged after reboot during CC	( SCGCQ01683057 ) 
 - [iMR7.5] Memory allocation failure during RAID operation cycles under high loading( SCGCQ01697700 ) 
 - pl: NVMe: ED8D fault	( SCGCQ01698373 ) 
 - PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0( SCGCQ01715509 ) 
 - Cannot stop patrol read on PD with medium errors by the stop cmd	( SCGCQ01715992 ) 
 - IR : Resync can be Pending and in progress at the same time on a Raid 10 Volume( SCGCQ00138417 ) 
 - Fix unused variable warning in I2C codes	( SCGCQ00140588 ) 
 - Unable to execute diagnostic console commands after fault( SCGCQ00141555 ) 
 - (IOP-Only( SCGCQ00142962 ) 
 - Flashing a thunder bolt or meteor with DDR enabled FW cause a 1808 fault followed by a recursive 265d fault( SCGCQ00143378 ) 
 - Removing dead code for volume inline update	( SCGCQ00145728 ) 
 - IOP: Diagnostic Console xget commands fixed	( SCGCQ00146562 ) 
 - Infinite loop when using FPGA and Trident and Boot loader( SCGCQ00149422 ) 
 - Firmware faults while booting with DDR disabled in NVData( SCGCQ00149423 ) 
 - SAS-3 FW FPE Checkpoints Interfere with Code to Decrement the IO Count( SCGCQ00151849 ) 
 - Defects found in init code review fixed( SCGCQ00152229 ) 
 - Compilation error with Power Mgmt Code( SCGCQ00156158 ) 
 - Unitialized variable in firmware upload command handler( SCGCQ00157647 ) 
 - RMTFLASH scripts can fail when programming the main FW image into FLASH( SCGCQ00158086 ) 
 - Corrupted PPC instructions at the end of the function iopSched	( SCGCQ00161664 ) 
 - tlbInitNvsram( SCGCQ00164720 ) 
 - IOP: PCIe Reply Queue FIFO index overflow work around( SCGCQ00168591 ) 
 - Write IOs stall during task management( SCGCQ00169848 ) 
 - When using Fast Path Timer, IO Count could get corrupted	( SCGCQ00170066 ) 
 - Workaround for ctrlupd_req signal in Cobra DDR3	( SCGCQ00172023 ) 
 - Fault 0x0610 occurs during Message Unit Reset( SCGCQ00172125 ) 
 - Build fails because of Small Data Area overflow	( SCGCQ00176456 ) 
 - PPC476 TLB parity not being properly initialized	( SCGCQ00181733 ) 
 - Fault 0x5826 when running Task Management tests	( SCGCQ00183297 ) 
 - Various IOP firmware fixes for A0 silicon( SCGCQ00186025 ) 
 - CLI Command Reports PCIe Link Speed and Width Incorrectly( SCGCQ00187285 ) 
 - Phy link rate does not follow MaxMinLinkRate in sas io unit page 1( SCGCQ00187614 ) 
 - Fix SysDMA test firmware	( SCGCQ00187760 ) 
 - Core reset results in missing interrupts	( SCGCQ00188810 ) 
 - PCI-Express Link Layer registers inaccessible( SCGCQ00188937 ) 
 - First set of changes to DDR3 library from validation/bring-up( SCGCQ00189172 ) 
 - Missing MSI-X interrupts and replies after message unit reset( SCGCQ00193609 ) 
 - (NVData( SCGCQ00194017 ) 
 - Prototypes for iopiMid2PtrMsg( SCGCQ00194557 ) 
 - Invader firmware gets stuck waiting for the Reply Post Queue to become not full( SCGCQ00203395 ) 
 - (NVData	( SCGCQ00204610 ) 
 - DDR3 through-put is not as high as expected( SCGCQ00204630 ) 
 - PL does not handle completion from IOPCompletionQueue for PL Light IOs( SCGCQ00205349 ) 
 - Fixes to handle "Global Power Management Change" MPI request parameters and display proper power management modes in IOU Page 7 at start of day.	( SCGCQ00205370 ) 
 - Fix build error( SCGCQ00205595 ) 
 - PCI-Express hardware issue in systems supporting TPH	( SCGCQ00205727 ) 
 - Work around Reply Queue port reply entry loss( SCGCQ00206002 ) 
 - Gen3: PwrMgmt- IoUnitPg7's 'Board Temperature' field reports random data.( SCGCQ00206329 ) 
 - Invader A0- D027 fault when disabling 3 phys when stress is running in a target and initiator mode setup	( SCGCQ00207040 ) 
 - Firmware lockup when using two CLI sessions simultaneously( SCGCQ00207538 ) 
 - Fault code 0x0012 is used twice( SCGCQ00209961 ) 
 - Fault 0000130D( SCGCQ00210292 ) 
 - Hearbeat LED does not display hte fault code when controller has faulted	( SCGCQ00210298 ) 
 - System DMA error not causing a firmware fault( SCGCQ00213368 ) 
 - Invader: Updated the FW work around tables for the B0 release.( SCGCQ00218436 ) 
 - Corruption on writes to memory during read-modify-write( SCGCQ00220982 ) 
 - Workaround for LMIDs in exception queue having wrong VF_IDs( SCGCQ00222933 ) 
 - (FPGA/Palladium( SCGCQ00223234 ) 
 - EthHAL: MAC address programmed into hardware backwards( SCGCQ00223376 ) 
 - Fixed adapter resets when a SAS IO Unit Control Request is issued with Operations related to Fast Path( SCGCQ00224193 ) 
 - Invader FPGA: Invalid MIDs getting used for local messages( SCGCQ00224208 ) 
 - Diag buffer generates incomplete trace entries( SCGCQ00225167 ) 
 - Fault 0x265D	( SCGCQ00225369 ) 
 - Invader EthHAL: ethiReceiveFrame( SCGCQ00227343 ) 
 - I2C reads to specific offset in a SEEPROM device might fail( SCGCQ00227919 ) 
 -	( SCGCQ00228765 ) 
 - D072 Fault	( SCGCQ00229676 ) 
 - Invader A0: Global Power Management State can still be changed when it hasn't Taken Control.	( SCGCQ00231505 ) 
 - Roam of Gen2 IR volume to Gen3 and back requires changes in order for scrub duration to be handled.( SCGCQ00231723 ) 
 - Fault 0xD033	( SCGCQ00235681 ) 
 - 0x265D fault may occur when printing the ring buffer	( SCGCQ00237185 ) 
 - Fault 0x2667 when trying to register a diag trace a second time( SCGCQ00242016 ) 
 - AHQD CSETs were done incorrectly.( SCGCQ00243082 ) 
 - (SR-IOV Only	( SCGCQ00243150 ) 
 - Fault 0x2623 while attempting to boot with an Invader A0 in a Dell Poweredge 2970( SCGCQ00248637 ) 
 - Fury does not see all the drives when DDR is enabled in Manufacturing Page 11( SCGCQ00251457 ) 
 - ONFI: The return type of U64 is not compatible in Linux environment	( SCGCQ00251506 ) 
 - MSI-X Table Size field is improperly formatted( SCGCQ00254493 ) 
 - RmtFlash: Returns invalid status	( SCGCQ00254879 ) 
 - 0x0810 fault when booting after power cycling 11 enclosures	( SCGCQ00255194 ) 
 - sas2flash can not erase firmware if DDR is enabled in the nvdata	( SCGCQ00263211 ) 
 - (IOP	( SCGCQ00265408 ) 
 - IOP Fault 0x265D occurs during non-FPE IO( SCGCQ00279463 ) 
 - When doing Task Managmeent cleanup, an invalid Parity error may be caused by HW cleanup	( SCGCQ00280175 ) 
 - Ping utility has potential for out of bounds array access.( SCGCQ00282732 ) 
 - IOP: Fault 0x26B1 encountered after Powerloss signal is deasserted( SCGCQ00290633 ) 
 - Fault 6108 used in multiple places.	( SCGCQ00291410 ) 
 - MPI PMC request message with the Feature set to PORT_WIDTH_MODULATION - FAILS( SCGCQ00293376 ) 
 - DIS mis-compare due to bad restore's DMA Descriptors	( SCGCQ00296967 ) 
 - 0x130A fault when running firmware on other flavors 3108 controller( SCGCQ00301169 ) 
 - RAID1 volume fails to resync when compatible drive is available	( SCGCQ00317642 ) 
 - Using the Diagnostic RW registers after a chain pull causes PCIe lock up	( SCGCQ00320990 ) 
 - Invader B0: Fix Diag Trace release starting offset	( SCGCQ00321917 ) 
 - Drive loss causes when direct attached expander is flagged as removed( SCGCQ00338053 ) 
 - Initial bring up in lab for AHCI	( SCGCQ00356058 ) 
 - Back end PCI interrupts are not enabled	( SCGCQ00357192 ) 
 - DDR3 : ddriEnableForceEccError( SCGCQ00361334 ) 
 - Need UART commands to show backside PCIe information	( SCGCQ00364512 ) 
 - Internal tool fix, does not affect FW( SCGCQ00391082 ) 
 - No functional change	( SCGCQ00395325 ) 
 - Timers are longer than expected on FPGA	( SCGCQ00397134 ) 
 - RAIDContextOfffset field in Message Config Registers are not correct	( SCGCQ00397602 ) 
 - (BUILD ONLY( SCGCQ00398135 ) 
 - (IOP	( SCGCQ00408393 ) 
 - PCIe discovery doesn't work for AHCI behind PCIe switch	( SCGCQ00412140 ) 
 - NVMe: Nonzero SkipCount doesn't work very well( SCGCQ00412150 ) 
 - Duplicate LMIDs might be present in the hardware FIFO causing 0xD065, 0xEC0F faults during FastPath IOs	( SCGCQ00432573 ) 
 - PL: SGL print for debug may not work properly( SCGCQ00433625 ) 
 - Document Defect: SAS 3.5 Firmware Summary Release Notes Incorrect( SCGCQ00435723 ) 
 - E00E fault occurs during heavy IO to AHCI devices( SCGCQ00449814 ) 
 - PL: ownership of frame containing a non read write IO to a backend PCIe device( SCGCQ00456377 ) 
 - CM fails to detect a switch attached NVMe device	( SCGCQ00479121 ) 
 - Build fails when PL_FEATURE_PCI_DEVICE_SUPPORT macro disabled( SCGCQ00481604 ) 
 - IO timeouts or D071 fault during task management with backend AHCI device( SCGCQ00484044 ) 
 - Backend PCIe completion timeout prevention bugfixes	( SCGCQ00505131 ) 
 - E002 fault occurs during AHCI task management( SCGCQ00505719 ) 
 - NVMe: LUN not validated before use in non read write translations( SCGCQ00562314 ) 
 - uatx.mak build doesn't work	( SCGCQ00569052 ) 
 - AXI2SHELLRegisters.h fails to build	( SCGCQ00573497 ) 
 - Intruder/Ventura: Update I2C4 select register offset	( SCGCQ00574166 ) 
 - NVMe: handling of admin queue full condition during NVMe async event handling( SCGCQ00600515 ) 
 - Config page accesses time out( SCGCQ00604559 ) 
 - With PL_FEATURE_PCI_DEVICE_SUPPORT disabled, improper MPI status sent back to config Requests( SCGCQ00613854 ) 
 - Ventura: The IFSR and DFSR error flags are not cleared on reset( SCGCQ00618466 ) 
 - 26B5 fault on backend PCIe link down	( SCGCQ00640436 ) 
 - "Rsvd15" prints with FxCore IOs	( SCGCQ00663642 ) 
 - Ventura: System stack is not dumped for backtrace( SCGCQ00675391 ) 
 - Fault 0x265D running IO on Linux OS	( SCGCQ00677801 ) 
 - Intruder FW halts at boot with 2.0 bitstream	( SCGCQ00685756 ) 
 - Ventura: Need required external defines and header file ordering to include SCS FW libs in IOP( SCGCQ00697063 ) 
 - Intruder: Fix issues in FW controlled spinup	( SCGCQ00710609 ) 
 - VENTURA: update SPI library to set continuous mode counter( SCGCQ00730738 ) 
 - Ventura: Small Data Area overflow in compile/link operation( SCGCQ00735463 ) 
 - Remove redefinition of IOC_NUM_PHYS( SCGCQ00736730 ) 
 - Ventura: Backtrace.pl needs to be updated to account for firmware mapping( SCGCQ00747268 ) 
 - Dauntless FPGA: 0900 fault after Linux driver load with AHCI device	( SCGCQ00751416 ) 
 - Backend PCIe: periodic dev init state check shouldn't run if init isn't running	( SCGCQ00760618 ) 
 - Ventura: SPI-FLASH Boot Fails( SCGCQ00769262 ) 
 - Internal Build Tool Error( SCGCQ00770250 ) 
 - Ventura: SCSI IO's fail due to invalid Virtual to Physical Translation( SCGCQ00779552 ) 
 - Intruder (ethHal	( SCGCQ00786810 ) 
 - Ventura: SPI library - NVSRAM write is not persistent after power cycle( SCGCQ00802389 ) 
 - Backend PCIe: EC0F or D065 faults during PCIe task management( SCGCQ00804044 ) 
 - IOP Pointers for Ext Mfg Pages 42/43 Are Calculated Incorrectly at Start of Day( SCGCQ00814416 ) 
 - NVDATA: BusNum/ISTWIControllerNum for SBR in Ext Mfg Page 43 is Incorrect( SCGCQ00814422 ) 
 - IOP directly accesses PL instead of using PLI( SCGCQ00820292 ) 
 - Build: Customized NVData files can be overwritten during the build process( SCGCQ00831527 ) 
 - IOP: Firmware fault on Intruder A0 will trigger recursive 0x265E	( SCGCQ00833018 ) 
 - Ventura: fwheadx compile error( SCGCQ00838005 ) 
 - Ventura: backend PCIe: some bringup changes	( SCGCQ00841065 ) 
 - Ventura: SysDMA FPGA Problem Fixed( SCGCQ00842462 ) 
 - Round 1 of fixes for issues found while performing basic dev test for PCIe error interrupt path	( SCGCQ00843113 ) 
 - Unmap FIS Port Translation Hangs if No Range List Entries are Generated( SCGCQ00844030 ) 
 - IOP (Ventura	( SCGCQ00849743 ) 
 - nvdata.xsl not present in IT release package	( SCGCQ00849795 ) 
 - Cutlass: Firmware download fails when using Cutlass production boards( SCGCQ00851669 ) 
 - Ventura: Fault 265D when pl dbg dumps PtrHwDmaQFreePointer( SCGCQ00852104 ) 
 - IOP: Remove fault 0x1801	( SCGCQ00852302 ) 
 - SAS3.5FW has tabs in source code	( SCGCQ00852767 ) 
 - Ventura: modify some debug info( SCGCQ00856678 ) 
 - Ventura : Rmtflash build error( SCGCQ00860460 ) 
 - Fault 0xEC60 starting IO	( SCGCQ00860763 ) 
 - Rearrange PDB RCC interrupt handlers to avoid spurious interrupts( SCGCQ00862058 ) 
 - Ventura: backend PCIe: PL translated PCIe read/write IOs may time out( SCGCQ00869263 ) 
 - PL: Remove Unused Fault Codes( SCGCQ00872313 ) 
 - NVDATA: Correct SubSystem Vendor ID( SCGCQ00872784 ) 
 - Ventura FPGA: 0xEC9D during PCIe task management	( SCGCQ00872879 ) 
 - Fix the "Check Header" function of the RBD tool.	( SCGCQ00879401 ) 
 - Ventura: Main firmware region gets programmed twice	( SCGCQ00884089 ) 
 - CSW Library header file names are not unique	( SCGCQ00884495 ) 
 - Ventura FPGA: TM to devices behind switch failing( SCGCQ00895687 ) 
 - Ventura: Number of MSIX vectors is 16( SCGCQ00896514 ) 
 - IOP: Fix compilation issues	( SCGCQ00902089 ) 
 - Ventura: PCIE_MAX_PCI_FUNCTIONS not in a distributeable file	( SCGCQ00905007 ) 
 - To resolve the build all issue for the code check-in ER SCGCQ00888047( SCGCQ00914293 ) 
 - IOP & PL: Move certain PL structures to use OCM PLB Segment 2( SCGCQ00917625 ) 
 - IOP: Disable interrupt tracking feature	( SCGCQ00917700 ) 
 - Ventura: Dauntless min build fails with GPIO wide port group mapping changes	( SCGCQ00923022 ) 
 - Tiger: Remove SUCCESS (1	( SCGCQ00925729 ) 
 - Ventura: backend PCIe: incorrect link rate may be reported in PCIe IO Unit Page 0	( SCGCQ00925861 ) 
 - Spico interrupt timeout after 500 Sbus loops is reported by the library	( SCGCQ00940213 ) 
 - BL: Tiger: IT firmware fails to boot	( SCGCQ00941168 ) 
 - A15 does not boot successfully from SPI flash after adapter reset( SCGCQ00947330 ) 
 - Ventura: OCM Valid Flags are Incorrect for some configurations( SCGCQ00948910 ) 
 - Tiger FPGA: 0x5854 when posting Trace Buffer during IO	( SCGCQ00950016 ) 
 - Ventura: Remote FLASH Utility Doesn't Print to UART0	( SCGCQ00950134 ) 
 - Ventura: Not able to download the image to the Ventura controller( SCGCQ00952625 ) 
 - Tiger: ensure PL memory is zeroed at start of day( SCGCQ00952695 ) 
 - Ventura: backend PCIe: fix some config page related bugs	( SCGCQ00954691 ) 
 - Ventura: backend PCIe: NVMe devices or PCIe switches intermittently fail to link up	( SCGCQ00987792 ) 
 - Ventura A0: Erasing board produces unwanted UART prints	( SCGCQ00988616 ) 
 - Ventura: previous NVDATA version is always 0xFFFFFFFF( SCGCQ00988621 ) 
 - MiniDMA updates necessary for DDR4 bringup on Ventura A0.( SCGCQ00991769 ) 
 - IOP: Intruder: Firmware download through Sas3Flash or equivalent utility fails with return IocStatus 0x8004	( SCGCQ00997542 ) 
 - IOP: Intruder: SBR Load error print caused due to wrong ordering of bit-fields inside the internal structure	( SCGCQ00997544 ) 
 - Ventura: Fix typo in register definition name( SCGCQ01002334 ) 
 - Ventura A0 : MSS : Some bug fixes( SCGCQ01012325 ) 
 - Tiger: TLPs from NVMe drives have incorrect requester ID on egress at host port( SCGCQ01015401 ) 
 - IOP: Temporary chain memory buffer allocated with the wrong size	( SCGCQ01015465 ) 
 - IOP: Stryker sends events using MSIx index 1	( SCGCQ01016001 ) 
 - Tiger: TM aborted IO on Tiger was not using the FW reply path, instead the success reply route was used	( SCGCQ01017369 ) 
 - SGPIO Locate function is not working on particular controller board	( SCGCQ01019498 ) 
 - Ventura: backend PCIe: incorrect descriptor type returned on firmware path NVMe encapsulated completion	( SCGCQ01024109 ) 
 - Tiger IOP: Remove SysDMA FPGA workaround	( SCGCQ01024671 ) 
 - Tiger FPGA: Fix some remote core IOA IO print strings( SCGCQ01024713 ) 
 - Ventura NVData: Manufacturing Page 9 has incorrect value in NumResources	( SCGCQ01027223 ) 
 - PL: Fault code 0xD091 is in multiple locations( SCGCQ01029667 ) 
 - Tiger IOP: UART unresponsive when running NVME IO that requires FW handling( SCGCQ01032056 ) 
 - Ventura: NVMe and non-NVMe performance tuning( SCGCQ01039059 ) 
 - Ventura: PL Fault 0000d073( SCGCQ01039143 ) 
 - Ventura Tiger: Unsupported/Failed Task Managements should also be forwarded to Tiger before failing back to host	( SCGCQ01041510 ) 
 - Tiger: Implement workaround for PSB failure to transmit message TLPs	( SCGCQ01044060 ) 
 - Ventura: backend PCIe: miscompare may occur after link glitch between HBA and PCIe switch( SCGCQ01046343 ) 
 - PL: Mid reuse may cause data miscompare( SCGCQ01047691 ) 
 - SPI Library: Initialization failing to find devices is covered up( SCGCQ01047701 ) 
 - FW entered PL Fault 0000d0d1 while I/Oing across LDs	( SCGCQ01059682 ) 
 - Tiger FPGA: Task Management to an NVMe drive causes the drive to drop off( SCGCQ01065218 ) 
 - Modify filter of dual VREF range optimization.( SCGCQ01068008 ) 
 - NVMe: Incorrect Informational Exceptions log page for NVMe Drives( SCGCQ01070221 ) 
 - Ventura: B0 requires check of enqueue register before disabling queue manager state machine( SCGCQ01070612 ) 
 - Marlin controller as a target device is not always discovered by test tool( SCGCQ01074546 ) 
 - IOP: Fix build all error when building Ventura firmware with SED support	( SCGCQ01075241 ) 
 - IOP: Expected features were incorrectly compiled out	( SCGCQ01080016 ) 
 - Tiger: ENABLE_CONFIG_SPACE(	( SCGCQ01090035 ) 
 - Uninitialized return variable( SCGCQ01091185 ) 
 - IT: "iop xget trace" doesn't work( SCGCQ01109405 ) 
 - ComboSerdes: TXEQ settings hash table is missing the SATA 3G defaults( SCGCQ01126640 ) 
 - Ventura: Add new reset algorithms to RMC to support SBR Reload( SCGCQ01131809 ) 
 - Ventura/Marlin: backend PCIe: reliability of link bandwidth change notification	( SCGCQ01138343 ) 
 - Ventura B0: Fault 0x265D while Load/unloading drivers( SCGCQ01139214 ) 
 - Ventura A0: Using 9400-16i partial NVMe enabled XML file doesn't discover direct attached NVMe devices( SCGCQ01143427 ) 
 - Incorrect flash offset is being calculated for full flash write	( SCGCQ01144266 ) 
 - IOP: Firmware is not notified of received PCIe VDMs when MemSpaceEn is clear	( SCGCQ01144917 ) 
 - Marlin/Ventura: Add L0s state work-around( SCGCQ01149895 ) 
 - Venture RMC: Add AVSO code to handle un-programmed Infineon regulators.( SCGCQ01152197 ) 
 - Ventura: Fix bad Clear Case AutoMerge	( SCGCQ01154480 ) 
 - Marlin MSS: Null pointer encountered when performing MSS register dump before performing DDR initialization( SCGCQ01162002 ) 
 - Tomcat iMR - Performance degrade at IO size greater than strip size	( SCGCQ01164595 ) 
 - PL: Possible null pointer access in a non-automated SATA Response Frame	( SCGCQ01168086 ) 
 - PL: Unchecked function return value in sata code	( SCGCQ01169267 ) 
 - MSS Ventura performance enhancements	( SCGCQ01172218 ) 
 - EVT3: 9400-16i PCIe NVME Ref Clock is missing on 2 of the 4 internal connector ports	( SCGCQ01176652 ) 
 - Ventura: ISTWI tool compiled out of IOP (returns INVALID FIELD( SCGCQ01177983 ) 
 - Ventura B0 MSS: Training failures when halfmode enabled.	( SCGCQ01178243 ) 
 - Ventura: Toolbox command (ISTWI Read Write Tool Request Message	( SCGCQ01180813 ) 
 - Ventura: RMC Match Detection Doesn't set Write Enable to Register File( SCGCQ01191760 ) 
 - Ventura: IOCInit request succeeds when the HostPageSize is invalid( SCGCQ01194895 ) 
 - Ventura: backend PCIe: compatibility tweaks for NVMe devices	( SCGCQ01201787 ) 
 - PL: Remove unused fault codes and correct documentation issues in pliFault.h	( SCGCQ01202876 ) 
 - Validate mid in Tx openfail cleanup( SCGCQ01215592 ) 
 - Incorrect Phy slot mapping and connector names on Channel HBA NVDATA xmls.	( SCGCQ01217015 ) 
 - Ventura: Large Latencies observed using MCTP over PCE with some BMC's( SCGCQ01217762 ) 
 - bld all failure due to CSET SCGCQ01213000( SCGCQ01228855 ) 
 - Ventura B0: 9400-16e : Only 2 of the 4 direct attached drives are discovered for Quads 1 and 3 of the controller.( SCGCQ01234249 ) 
 - Valid readeye check fails in halfmode and noecc.	( SCGCQ01234511 ) 
 - Customer board faults during System POST when run on Purley platform	( SCGCQ01234713 ) 
 - pl: NVMe: Abort Task may abort an IO when it is still outstanding at the device( SCGCQ01235948 ) 
 - Marlin: Current build for marlin uses old A.0 SPICO	( SCGCQ01235975 ) 
 - Marlin: Add additional support for cold boot fix	( SCGCQ01251641 ) 
 - Marlin RMC: PC locking up on AHR	( SCGCQ01251657 ) 
 - Marlin: Fix IOP_INVALID_PCI_REVID_WORKAROUND so that it only applies to Marlin A.0 and Ventura( SCGCQ01251737 ) 
 - Changed copyright year 2015, 2016 and 2015-2016 to 2015-2017 in Ventura nvdata files.( SCGCQ01252186 ) 
 - Ventura 12G Links Occasionaslly Train Without SSC with Toshiba 12G SSD drives behind 6M cables( SCGCQ01252341 ) 
 - pl: task management may not complete with heavy IO load( SCGCQ01258861 ) 
 - VSES diag page 0A mapping not enabled for NVMe devices( SCGCQ01261033 ) 
 - Marlin: backend PCIe: various faults occur when a backend PCIe link goes down( SCGCQ01261195 ) 
 - Fault 0xD372 is seen during NVMe IO run and drive push pull test	( SCGCQ01271759 ) 
 - IOP: Incorrect temperature sensors polled( SCGCQ01280354 ) 
 - Modified default NVData to set the preset select to No Equalization for phys 8 - 15 to match phys 0 - 7.	( SCGCQ01295838 ) 
 - Ventura signed firmware image is crashing/abort stack( SCGCQ01304733 ) 
 - Due to a timing issue a hang condition may occur on cold power up( SCGCQ01311156 ) 
 - PD Lost observed, after system graceful reboot or Controller OCR	( SCGCQ01314168 ) 
 - Update host side spico to version 6069( SCGCQ01319764 ) 
 - PL Fault 0000d074 when run IOMeter overnight R0 fastpath	( SCGCQ01331410 ) 
 - Ventura: PL FW may Fault x61A5 during cable pull to an external enclosures with IOs outstanding	( SCGCQ01334254 ) 
 - Patrol read is too slow with IOs.( SCGCQ01341562 ) 
 - Ventura MSS: ECC errors encountered due to bad feedback compensation.( SCGCQ01354148 ) 
 - SSU Commands to SPL-2 compliant drive times out( SCGCQ01358769 ) 
 - NVMe: wrong reply type when Force Admin Error Response flag is set( SCGCQ01365133 ) 
 - PL: RETURNED LOGICAL BLOCK ADDRESS in READ CAPACITY (16	( SCGCQ01366977 ) 
 - pl: backend PCIe: EC79 fault	( SCGCQ01367013 ) 
 - PL: More than one ATA command at a time may be submitted to a SATA device( SCGCQ01377242 ) 
 - MR 7.4 - EPD non read write IO's need to be passed through to drives	( SCGCQ01377806 ) 
 - pl: NVMe: device initialization may not be retried on error( SCGCQ01380464 ) 
 - Fix the compiler warnings in plTbMgr.c( SCGCQ01385694 ) 
 - Fault 0xd074 while running IOs with Non-Auto commands & config page read( SCGCQ01388638 ) 
 - MR 7.4 - Missing profile 12 to support 240 PD/VD in RAID personality	( SCGCQ01389010 ) 
 - MR7.1: Shutdown command received from host" missed in tty log( SCGCQ01389941 ) 
 - Consolidate the HOST TM debug variables( SCGCQ01391601 ) 
 - Cannot set profile Id to PCIe on 9460-8i controller.	( SCGCQ01392208 ) 
 - MR-7.4-Pre-Alpha: R0, R1, R10 VDs built with HDDs failed to complete format operation on Windows 2016 x64( SCGCQ01392904 ) 
 - disableSAS allows SATA drives( SCGCQ01393528 ) 
 - Ventura : " SAS discovery error event " message not seen in Linux driver logs( SCGCQ01395698 ) 
 - MR7.1 -587: Flash write Failed with err code 5( SCGCQ01396383 ) 
 - pl: NVMe: E402 fault	( SCGCQ01397837 ) 
 - During large topology cable break testing. Task Managements may time out due to an accumulation of time starting these TMs for many devices( SCGCQ01398213 ) 
 - 7.4: Taskman.c while perform cable pull/push multipath on Crusader iMR (48 JBODs	( SCGCQ01399203 ) 
 - Ventura 7.4 JBOD Personality : Target ID exhausted due to incorrect GUID target ID reservations( SCGCQ01399523 ) 
 - pl: NVMe: back out SCGCQ01392812	( SCGCQ01399559 ) 
 - NVMe PD removal during recon triggered C0:Assertion failure in ../../raid/pd.c at line 7441: (ar != AR_INVALID( SCGCQ01402373 ) 
 - iMR 7.4 - iMR controller hit Exception mon_task while booting up to VMWare 6.5( SCGCQ01403486 ) 
 - Allow only the hot plugged drive to be configured as EPD.( SCGCQ01404316 ) 
 - MR 7.4 - OFU flashing led to FW in Exception Mon_task Loop( SCGCQ01406734 ) 
 - MR7.4: Assertion failure in ../../raid/ldCmd.c at line 1252: FALSE while booting up VMware ESXi host	( SCGCQ01407830 ) 
 - Ventura BST 7.4 PJBod==> Controller POST hang at 73%	( SCGCQ01415585 ) 
 - Bitmap targetIdsToDelete used to track LD deletion not cleared following PD removal in JBOD mode	( SCGCQ01417497 ) 
 - pl: NVMe: 6001 fault	( SCGCQ01418183 ) 
 - Drive missing on power cycle	( SCGCQ01421447 ) 
 - MR-7.4-PreAlpha: Cannot set controller to RAID profile ID 12 from RAID profile ID 10	( SCGCQ01422409 ) 
 - Lnexecpted LogSense events generated on RAID and JBOD modes every five minutes( SCGCQ01422969 ) 
 - MR 7.4 Revert change for SCGCQ01412718( SCGCQ01423804 ) 
 - Ventura: Misc tri-mode backplane mgmt detection fixes and Slot status update changes	( SCGCQ01428718 ) 
 - pl: NVMe: memory leak in Verify (10/12/16( SCGCQ01429659 ) 
 - storclif64.exe /c0 show all command fails with "command not supported" but actually dumps output.( SCGCQ01435765 ) 
 - File name capitalization doesn't match #include and fails when building with Linux( SCGCQ01439249 ) 
 - MR7.4 iMR complains of reached max VDs error with only 3 VDs configured	( SCGCQ01444063 ) 
 - 7.4Alpha: nvdata need to be fix for 9441-8i related to an OEM WorkStation( SCGCQ01444165 ) 
 - Ventura: NVMe Target: REPORT LUNS SCSI Command Failed With CC for Supported SELECT REPORT field Values 01h, 10h or 12h( SCGCQ01444725 ) 
 - Ventura: NVMe Target: When MODE SENSE Command Executed for all supported Modes Pages, TRACK SKEW FACTOR Set as 0x01( SCGCQ01444843 ) 
 - Correct MFI passthrough TM matching logic for Host TM.( SCGCQ01445939 ) 
 - [PL] 7.4-MR 9460-16i(8GB	( SCGCQ01447367 ) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated( SCGCQ01450475 ) 
 - vSES Target: Allocation Length less than 16 Bytes for REPORT LUNS Command is not Handled Properly( SCGCQ01451022 ) 
 - pl: NVMe: EC26 fault	( SCGCQ01451332 ) 
 - WG:LSA in JBOD mode supports creating VD with "Always WriteBack" write policy( SCGCQ01454233 ) 
 - LSA shows "actions successful" message when user creates new JBod with controller has at max number of configured VDs( SCGCQ01454360 ) 
 - OEM HII populates ld.params.numDrives with ZERO if PRL=0x11 and uneven span support is on.( SCGCQ01454740 ) 
 - ld.c::LdDcmd( SCGCQ01461856 ) 
 - MR 7.4 - Multipath FO led to KA mon_task	( SCGCQ01464983 ) 
 - Change CACHE_HEADER_VERSION from 13 to 11( SCGCQ01465054 ) 
 - MR 7.5_UNMAP: For JBOD in JBOD-mode,Unmap is enabled even though drive is not capable.( SCGCQ01465673 ) 
 - Add new nvram variable to handle 4GB to 8GB MR FW Migration( SCGCQ01467193 ) 
 - MR7.5: NVMe passthrough for Identfiy command is not working( SCGCQ01467354 ) 
 - MR 7.4 - I/O on EPD dropped while running multipath FO.	( SCGCQ01469889 ) 
 - FW change to make boot block compile with latest code( SCGCQ01471538 ) 
 - UNMAP on VDs getting disabled for switching personality( SCGCQ01472038 ) 
 - Firmware needs block certain user initiated operaations while it is in pending transition from one profile or personality to another	( SCGCQ01473242 ) 
 - Sending Unmap command to Medium Error LBA does not remove LDBBM entry( SCGCQ01474960 ) 
 - HW Workaround:PCE backpressures AXI writes when Reply FIFO is full( SCGCQ01475082 ) 
 - Remove TFM VPD related prints which are not relevant for Ventura.( SCGCQ01475234 ) 
 - Unmap is getting enabled in firmware on NVME drives,but actually not (sg_util says not enabled( SCGCQ01478538 ) 
 - MR7.3 & 7.4 With iMR Unconfigured NVMe drives become Unconfigured Bad When Converting Them to JBODs( SCGCQ01479017 ) 
 - Drive addition in OS takes longer time when Drives are connected with certain backplanes to the controller( SCGCQ01479406 ) 
 - MR 7.3.1 MixMode-SAS drives become 0KB once re-inserted( SCGCQ01479653 ) 
 - MR 7.5 : PI Drive become offline when create VD( SCGCQ01482723 ) 
 - (SATA Only( SCGCQ01485060 ) 
 - FIQ and TaskAdd( SCGCQ01487394 ) 
 - MR7.5: Assertion failure in ../../dm/mpt2/mptTaskMgmt.c at line 1070: pDevInfo->devHandle[path] == devH( SCGCQ01491185 ) 
	Page 8 / 391
 - Ventura BST 7.5 iMr ==> Update to ROP 872 kill adapter( SCGCQ01495902 ) 
 - MR7.5: NVMe VDs import as JBOD after remove and re-insert( SCGCQ01496893 ) 
 - System will pop up “Cannot communicate with iButton to …” during reboot with OEM custom card	( SCGCQ01501209 ) 
 - Assertion failure in ../../dm/mpt2/mptframe.c at line 1250: mptIo!=NULL	( SCGCQ01502102 ) 
 - SATA: Report Zone for very large data of 4MB takes ~2 seconds for processing	( SCGCQ01502700 ) 
 - MR-7.5-Alpha: Cannot set Foreign UBad to Foreign UGood with a config of 31 VDs and iMR 9441-8i( SCGCQ01505522 ) 
 - SAS3.5FW_Common_Main was not stable after merging code changes for SCGCQ01421231	( SCGCQ01508018 ) 
 - MR 7.5-MR 9460-16i:Hit Assertion failure in ../../cpu/arm/exceptions.c at line 938 During I/O & Multipath Cable Pull	( SCGCQ01508249 ) 
 - MR7.5: Assertion failure in ../../cpu/arm/exceptions.c at line 938 observed, while destaging preserved cache on R0 DG( SCGCQ01509791 ) 
 - When update Vendor SAS 2.5" 10K 12Gbps 300GB HHD (PN:SH20J34185( SCGCQ01515259 ) 
 - Dump pending driver IO completions from task context during kill adapter debug( SCGCQ01519710 ) 
 - Ventura: 4311 fault with NVMe enabled( SCGCQ01519732 ) 
 - MR7.5: Firmware asserted at memory.h at line 443: isInAddressibleRange when push/pull JBOD NVMe drives( SCGCQ01522362 ) 
 - MR7.5: Firmware reports iopiTimedOutIOFound when running IO on NVMe JBOD drives	( SCGCQ01522509 ) 
 - 75Beta: pk970 Kill Adapter when create vd( SCGCQ01531146 ) 
 - MR 7.5: Enable MR code for generating firmware not compatible with profile event	( SCGCQ01538991 ) 
 - MR7.5 Beta OEM name Characters seen in HII Drive management instead of port information.	( SCGCQ01563926 ) 
 - MR7.5: Rearrange MR IO path routines to fit the new PL( SCGCQ01565754 ) 
 - MR7.5: Changing personality between RAID and JBOD resulted in firmware assertion	( SCGCQ01566825 ) 
 - Task Management due to SATA init failure results in resource error message( SCGCQ01605610 ) 
 - DISM - Assertion failure in ../../dm/src/devRemoval.c for breaking multipath during bootup( SCGCQ01618628 ) 
 - [MR7.5] Rebuild Progress 0 % logged just after OS reboot during rebuild running	( SCGCQ01631496 ) 
 - Not to do all drives reset at the start of the boot up on each port of the controller( SCGCQ01670965 ) 
 - incrementing other error count for RECOVERED_ERROR with any asc and asc apart from 00/1d	( SCGCQ01729713 ) 
 - MPI2_FW_IMAGE_HEADER is 16 bits too long	( SCGCQ00009501 ) 
 - Firmware download fails with lsiutil but works with sas2flash( SCGCQ00141277 ) 
 - Moved Uartsettings from page 11 to page 31( SCGCQ00142367 ) 
 - (IOP-Only( SCGCQ00142963 ) 
 - Device add/remove testing results in a fault 0x6202.	( SCGCQ00151026 ) 
 - When devices are removed / added the I/Os hang.( SCGCQ00151027 ) 
 - High Priority message queue messages would fail( SCGCQ00151447 ) 
 - 0x6700 Fault	( SCGCQ00156772 ) 
 - Invader FW hangs when booted from FLASH	( SCGCQ00158076 ) 
 - (FPGA-Only( SCGCQ00160356 ) 
 - Fault 265D occurs following Port Enable when IR FW is loaded	( SCGCQ00162600 ) 
 - Fault 0xd012 while using Cuda timer when timeout is set to less than 3 seconds( SCGCQ00165753 ) 
 - Local chaining causes SAS core fetch errors	( SCGCQ00170855 ) 
 - FPGA: 0x5111 fault during Target Mode testing( SCGCQ00172991 ) 
 - Bugs found in DDR3 library during Palladium testing( SCGCQ00175814 ) 
 - 6001 Fault During IR RAID0 Volume Creation Under Linux SLES11( SCGCQ00177106 ) 
 - Code is modified such that temperature sensor channel defines now match the actual sensor placements in Invader Silicon.	( SCGCQ00186585 ) 
 - Firmware heap memory corruption( SCGCQ00192923 ) 
 - Implement workaround for PPC476 errata( SCGCQ00194226 ) 
 - Invader A0: Writing to Ethernet Page 1 current fails/hangs( SCGCQ00194767 ) 
 - Inaccurate firmware delay causes 0x670B fault( SCGCQ00195374 ) 
 - (FPGA Only( SCGCQ00200505 ) 
 - Ethernet is unresponsive during fault( SCGCQ00202278 ) 
 - Fault 0x5805 when running very heavy FPE IO	( SCGCQ00205679 ) 
 - ITRACE dump command fails with memory allocation error.( SCGCQ00208393 ) 
 - Undefined macro IOP_MEM_REGION_TYPE_DDR_CACHED_SECOND_RANK in IOP( SCGCQ00213011 ) 
 - Invader A0: Fault 265D while running Block Move and Task Management Test	( SCGCQ00217049 ) 
 - Invalid 0x5897 and 0x6828 faults	( SCGCQ00218792 ) 
 - 0x5841 while doing single Phy cable breaks for 1 second( SCGCQ00219298 ) 
 - Invader A0 (USB	( SCGCQ00219373 ) 
 - Compilation issue on USB code( SCGCQ00219383 ) 
 - PCI-Express defect requires faster firmware response	( SCGCQ00223692 ) 
 - SAS3: 0x265D Fault while disabling Fast Path.( SCGCQ00229247 ) 
 - Firmware gets reset when we add Hot Spare to the Raid 1 volume.( SCGCQ00229913 ) 
 - PL: Need to have unique fault codes	( SCGCQ00263726 ) 
 - NVData: Update B0 SBR settings and other miscellaneous updates( SCGCQ00270288 ) 
 - (IOP	( SCGCQ00271154 ) 
 - IOP: IO Timeouts occur after running for 9.5 hours( SCGCQ00279186 ) 
 - Performance monitor for the COLT Core are not working.( SCGCQ00284994 ) 
 - IOP: Firmware fails to build	( SCGCQ00292957 ) 
 - Foreign volume activates and starts rebuilding( SCGCQ00310543 ) 
 - BGI disabled for PI volume when CC_Disable is set( SCGCQ00314979 ) 
 - An internal tool for parsing stack traces needed an update( SCGCQ00349338 ) 
 - Enable the new PCIe device translation block	( SCGCQ00349889 ) 
 - (CUDA( SCGCQ00386306 ) 
 - PCIE IO Unit 0/1 size in header is not correct	( SCGCQ00394558 ) 
 - Internal tool change. No change to firmware.	( SCGCQ00394559 ) 
 - Several issues related to exception/error handling for NVMe devices( SCGCQ00397632 ) 
 - Typo in SAS3 hardware header file( SCGCQ00398334 ) 
 - Dauntless FPGA: Data Corruption reported when running 1M IO to AHCI device( SCGCQ00424263 ) 
 - No access to DDR for backend PCIe devices( SCGCQ00426529 ) 
 - FPGA timers are longer than expected.( SCGCQ00432537 ) 
 - AHCI: Command timeout with mixed auto and nonauto IOs( SCGCQ00448191 ) 
 - Dauntless FPGA PDB PIM alignment issue( SCGCQ00449934 ) 
 - IOP: Maximum Stang exceptions handled count is too high( SCGCQ00521714 ) 
 - NVMe: Write Buffer (mode 0x5	( SCGCQ00557073 ) 
 - Dauntless: Backend POM Window size should be aligned to number of PCIe devices supported	( SCGCQ00558089 ) 
 - Remove Palladium NVDATA for Dauntless.( SCGCQ00602338 ) 
 - Dauntless SPI DCR setting( SCGCQ00612654 ) 
 - SAS3.5 MCTP: Bit field changed in I2CSlave( SCGCQ00638812 ) 
 - Accessing unmapped memory space for undefined SGPIO registers results in L2 errors.( SCGCQ00680988 ) 
 - NVData: Update MfgPg 9 minimum values to meet requirements( SCGCQ00740652 ) 
 - Ventura: SPI Library doesn't work with CFGI	( SCGCQ00741845 ) 
 - Ventura: Build Error - Code is non-compliant with the latest CPP standard( SCGCQ00811305 ) 
 - Ventura: System hangs when fault occurs	( SCGCQ00814903 ) 
 - Description for each PL_ASSERT fault is Required	( SCGCQ00816653 ) 
 - Ventura: Backtrace logic loops forever when no SYMBINFO structure is attached( SCGCQ00824296 ) 
 - Ventura: MSIX offsets incorrect in capability( SCGCQ00853678 ) 
 - NVDATA: SAS9305-16e board does not link up( SCGCQ00855042 ) 
 - Ventura: core level interrupt starvation (part 3	( SCGCQ00855861 ) 
 - CommonSerdes Library compliance test fails( SCGCQ00864339 ) 
 - PL initializes IOA Local RAM with 0s without IOP FW knowing	( SCGCQ00877473 ) 
 - Ventura: IOC Capabilities needs Atomic Descriptor bit set( SCGCQ00892729 ) 
 - BL: Fix compiler warning about bad constant expression( SCGCQ00901269 ) 
 - BL: Tiger bootloader is locking up and causing aborts( SCGCQ00910746 ) 
 - RBD tool is not included in normal releases, so release notes are not required.( SCGCQ00910886 ) 
 - Build: Build all script fails( SCGCQ00914091 ) 
 - Build all fails in common main due to missing RmcSbr.bin file( SCGCQ00914418 ) 
 - NVData: Change to using 256 byte message frames	( SCGCQ00927945 ) 
 - Spi Library does not work with PCI windows( SCGCQ00949953 ) 
 - Move CSW Tx Phase Slip Workaround to the ComboSerdes Library	( SCGCQ00951761 ) 
 - Ventura IT: uploading of image is failing with 265D( SCGCQ00952523 ) 
 - Tiger: CSW library build error due to incorrect path	( SCGCQ00982299 ) 
 - Ventura A0: Fault 0xD20D during shutdown of linux system	( SCGCQ00992057 ) 
 - Ventura: Build ALL failure( SCGCQ00997110 ) 
 - Tiger: Allow FPGA Build to Work on Veloce Platform( SCGCQ01000130 ) 
 - Tiger: Clean Up Code in PCIe High Priority Interrupt Handler	( SCGCQ01002423 ) 
 - Ventura A0: Debug masks set in uart are not being honored( SCGCQ01017063 ) 
 - Ventura: host system crashes on hard reset after firmware update	( SCGCQ01019234 ) 
 - IOP: Reply descriptors not being sent to the host( SCGCQ01024830 ) 
 - Ventura MSS: DDR library completes successfully but memory access results in data corruption	( SCGCQ01034012 ) 
 - Ventura: Firmware Path Peformance is Low Compared to Cutlass	( SCGCQ01036330 ) 
 - Ventura A0: NVMe device isn’t getting reconfigured even though discovery runs and appears to find it	( SCGCQ01058974 ) 
 - Ventura MSS: Interface changes for dual rank	( SCGCQ01070444 ) 
 - Marlin: Enabling PVT at conclusion of DDR init causes data corruption issues.( SCGCQ01070542 ) 
 - Fault x6030 seen running Abort Task	( SCGCQ01080071 ) 
 - Marlin A0: During PCIe jammer testing, host system reboots after just a few seconds due to completion timeout( SCGCQ01080162 ) 
 - Coverity defect: Dereference after null check and Unused value( SCGCQ01089963 ) 
 - ComboSerdes: The SAS 12G Preset selection is fixed to NO-EQ	( SCGCQ01089992 ) 
 - Coverity defect: Out of bound memory access	( SCGCQ01093405 ) 
 - Tiger FPGA: Fix PCIe Io Unit Page 0 Read handler	( SCGCQ01095060 ) 
 - Ventura A0: TFM Fixed information being reported, but is all bogus values( SCGCQ01118873 ) 
 - Ventura MSS: flawed conditional expression checking for ECC errors( SCGCQ01119518 ) 
 - Marlin MSS: Half mode does not work( SCGCQ01133813 ) 
 - IOP: MCTP: PCIe Message transmission hardware can send extra DWORD and split packets	( SCGCQ01146557 ) 
 - Ventura/Marlin A.0: Firmware faults 0x1500, reply parity error( SCGCQ01154820 ) 
 - Need to support different bus address values for PMBus voltage regulators.( SCGCQ01174484 ) 
 - Ventura PL: (NVMe( SCGCQ01196103 ) 
 - Ventura RMC: Improvements to AHR reset sequence to avoid Credit overflow issue seen in simulation.( SCGCQ01264665 ) 
 - Ventura/Marlin: 265D fault sometimes occurs when diag console utility is in use( SCGCQ01264675 ) 
 - Second rank showing different VREF results from first rank.( SCGCQ01267430 ) 
 - Ventura: Uart RX fifo uses an extra byte	( SCGCQ01293446 ) 
 - Ventura: HVD6 SERDES 3G/6G Attenuation Settings and Rx settings( SCGCQ01296832 ) 
 - One Spico load failure causes all subsequent Spico processors to be left at reset.( SCGCQ01302306 ) 
 - Can't program SPDimage to SPD EEPROM	( SCGCQ01314177 ) 
 - Ventura B0: CPLD flashing fails on 94008i8e	( SCGCQ01319974 ) 
 - Ventura/Marlin: backend PCIe: IO halt after a link glitch( SCGCQ01336859 ) 
 - Failure to read correct data from SPD EEPROM	( SCGCQ01358941 ) 
 - Clean up for Blackduck( SCGCQ01377109 ) 
 - pl: NVMe: E40E fault	( SCGCQ01377681 ) 
 - Ventura B0: NVME Drives Not Discovered on 16i Card( SCGCQ01381033 ) 
 - Ventura 7.4 - Enable FP reads and writes across stripe for single drive R0 WT LDs( SCGCQ01381722 ) 
 - storclif64 7.401.0.0: vall shows no VDs in JBOD mode while drives connected	( SCGCQ01384995 ) 
 - Controller issues 'BREAK' if expander returns 'OPEN_REJECT(RETRY	( SCGCQ01387414 ) 
 - MR7.4 Talladega 16i - RAID mode: Device ID changed after FW upgrade from MR7.2 to MR7.4( SCGCQ01387454 ) 
 - Unexpected IOC errors from PL( SCGCQ01389558 ) 
 - Task Abort fix and some framework for task abort check in.( SCGCQ01389705 ) 
 - Ventura/Marlin: SPI Library status irregularities( SCGCQ01393626 ) 
 - MR 7.4 - Missing inserted PDs (237 out of 239( SCGCQ01399538 ) 
 - MR_FW: Incorrect Block Limits VPD page for RAID Volumes	( SCGCQ01399941 ) 
 - DEVICE_INFO.hostTmActive flag not cleared for Abort task when the abortId is found in the DevWaitQ( SCGCQ01402362 ) 
 - MR 7.4 - FW hangs @ POST, RAID BIOS reported "A discovery error has occured".. even after power off/on a whole setup/encls.( SCGCQ01402855 ) 
 - Fix static code analysis tool detected defects( SCGCQ01406220 ) 
 - MR 7.4 when perform TaskMgmt on pd hit Assertion failure in ../../cpu/arm/exceptions.c at line 938: 0( SCGCQ01409019 ) 
 - Ventura: NVMe Target: Non-Zero Value in TRACK SKEW FACTOR field of FORMAT DEVICE Mode Page( SCGCQ01412908 ) 
 - Moving MFI state from undefined (0( SCGCQ01413748 ) 
 - Controller hangs after updating to latest ROP 676( SCGCQ01422235 ) 
 - MR 7.4: PL Fault 0000d033 LR 7f86e947 observed in JBOD personality (profile 23( SCGCQ01427119 ) 
 - Add SAS device discovery error event to IOP message events.( SCGCQ01428178 ) 
 - MR7.4 Crusader foreign import VDs hit assertion failure	( SCGCQ01438085 ) 
 - : MR 7.4 : Incorrect size (ZB( SCGCQ01438165 ) 
 - Add Debug for SED pass through( SCGCQ01440446 ) 
 - MR7.4: EPDs do not convert to JBOD when changing controller personality from JBOD to RAID.( SCGCQ01441340 ) 
 - FW crash	( SCGCQ01444114 ) 
 - extraneous assert on breaching MAX DEV/ENCL in profile.c::ProfileHandleTopologyErr( SCGCQ01447270 ) 
 - EPD data loss	( SCGCQ01449349 ) 
 - Revert autochain pull enablement for iMR	( SCGCQ01455832 ) 
 - XSD update requires major version change.( SCGCQ01455916 ) 
 - Ventura: Break up backplane mgmt device ISTWI Read/Write to the supported size( SCGCQ01456349 ) 
 - MR 7.4 iMR Crusader after IO and cable pull push from storclif command see Enclosure 64 but cannot find the enclosure 64	( SCGCQ01467123 ) 
 - Optimize abort handling in command block context.( SCGCQ01467284 ) 
 - Ventura MR - RAID Personality - R0 WB SW 4/8K all QD regression RHEL	( SCGCQ01468157 ) 
 - Clean up static code analysis tool detected defects	( SCGCQ01470671 ) 
 - pl: NVMe: port enable may complete before devices link up( SCGCQ01472531 ) 
 - Block personality change when EPD security is not safestore managed.	( SCGCQ01473960 ) 
 - Update OOB_METHOD_INFO_NVRAM due to changes in NVRAM	( SCGCQ01475424 ) 
 - Ventura vSES: Direct attached NVME drives are not getting associated with vSES in Microsoft Storage Spaces Direct.( SCGCQ01478170 ) 
 - Compile fix for mis-typed constant( SCGCQ01478391 ) 
 - FW does not complete if a bad drive return medium error for a pre-read(SCGCQ01481035 ) 
 - MR7.3.1_Assertion failure in ../../dma/dmaxor.c at line 1180:( SCGCQ01482384 ) 
 - MR7.5 : Not able to boot to OS with iMR NVMe	( SCGCQ01482722 ) 
 - MR7.5pkg846: Found IOs drop while multipath cable pull/push on maxconfig 230 Jbods( SCGCQ01484297 ) 
 - Intel MR7.3 & MR7.4 Beta: RAID-5 Hardware Key No Longer Functional with Intel Lava Dunes (ROP 834 & earlier is okay( SCGCQ01484398 ) 
 - MR 7.5 : iMR controller breaks into monstak if connect to SAS/SATA enclosure with NVMe profile	( SCGCQ01487399 ) 
 - 30% to 35% JetstressDB Average Write Latency regression found in R5, MR 7.4 Beta	( SCGCQ01488410 ) 
 - MR 7.5-iMR 9440-8i: Hit Assertion failure in ../../hw/pce/fusion.c at line 1847 after loading the driver & reboot( SCGCQ01502112 ) 
 - erroneously sorting bvdInfo while retrieving DDF Config causes DDF to be corrupted( SCGCQ01503916 ) 
 - pl: backend PCIe: additional phy hardware cleanup on link down and hot reset	( SCGCQ01504284 ) 
 - fw got data abort when connect more enclosure than max in iMR.( SCGCQ01509463 ) 
 - MR7.3.1 : user can set unsupported controller profile (ID: 12( SCGCQ01509952 ) 
 - pdCOD content is being overwritten when using storelibtest to issue SCAN FOREIGN	( SCGCQ01518446 ) 
 - Merge issue while removing unmap code from 7.5( SCGCQ01522805 ) 
 - MR 7.5_LSA: All VDs are not getting deleted after the vd erase operation with 'delete VD after erase' option is selected	( SCGCQ01522814 ) 
 - MR7.5: Spin up large config drives by load the config file while they are in POWERSAVE, caused FW hit DrvSpinup.c @line 1362	( SCGCQ01529400 ) 
 - Smart Return Status passthru command failed on SATA drives	( SCGCQ01555033 ) 
 - Data loss while upgrading from MR7.3 to MR7.5 because of cache start address change( SCGCQ01562381 ) 
 - : FW asserts when invalid parameters to set excluded ld for CC is sent to firmware.( SCGCQ01635729 ) 
 - Purely Server: Firmware Not Logging to Flash or Can't be Uploaded with StorCLI( SCGCQ01639777 ) 
 - MR PD GET info fails for SES processor( SCGCQ01685797 ) 
 - FPGA : FPE FW - Add a non zero value to Max completion Queue Read Count( SCGCQ00143659 ) 
 - FPGA: Bugs in TBM code( SCGCQ00143878 ) 
 - IOs stop suddenly with Open Reject No Destination( SCGCQ00152325 ) 
 - Fault 0x5861 on sending read IO from UART( SCGCQ00160923 ) 
 - Fault 0xD071 seen when sending down Abort Task Task Management(s	( SCGCQ00169004 ) 
 - TM: Fault 0xD0ED while running task management( SCGCQ00179989 ) 
 - Config Space VPD Read Incorrect( SCGCQ00183686 ) 
 - Fix 2 unguarded loops in Control Queue Cleanup( SCGCQ00183881 ) 
 - Ethernet: Checking Ethernet Page 0 with no MAC/SAS Address causes 0x265D fault( SCGCQ00195119 ) 
 - Linux driver fails to load on systems with more than 8 processor cores( SCGCQ00197603 ) 
 - Timeout of an Inquiry command to SATA drive which was already completed as failure	( SCGCQ00199797 ) 
 - Fix to accomodate backward compatibility for drives >2TB with Gen1	( SCGCQ00206467 ) 
 - PPC timebase register is not being read correctly in iopiGetTimeSinceStartOfDayUsec	( SCGCQ00208443 ) 
 - Invader internal memory corruption causes IOs to fail( SCGCQ00215887 ) 
 - Invader A0: IO print filtering optimization is not accounting for firmware subsystems( SCGCQ00223648 ) 
 - IOP: Enabled the early power loss interrupt( SCGCQ00277815 ) 
 - Invader: Fixed Build Problem Due to Mistake in NVDATA( SCGCQ00328068 ) 
 - No interrupt handler for L2 interrupts( SCGCQ00349336 ) 
 - Need Proper Routine for Initializing Cuda Timer Wheel RAM (Reset Sequence( SCGCQ00403591 ) 
 - Extra validation required for Silverhawk PIM1 settings( SCGCQ00484633 ) 
 - Backend PCIe completion timeout after a PCIe error message is received( SCGCQ00498112 ) 
 - Tip code fails to boot on Dauntless FPGA	( SCGCQ00628332 ) 
 - PLI_NVME_PRP_ENTRY contains U64math	( SCGCQ00665096 ) 
 - Ventura: ARM mmuVirtualToPhysical returns 1 instead of 0xFFFFFFFF for failure( SCGCQ00790198 ) 
 - SAS3.5 Hitting fault 0x265E at start of day	( SCGCQ00811690 ) 
 - Intruder A0: Ring buffer hangs up the UART and needs to reboot the server.( SCGCQ00845742 ) 
 - Ventrua FPGA: hit Fault 0x5801 running Data Integrity from RedEye( SCGCQ00857273 ) 
 - Ventura: Update the PCE SBR for device IDs other than 0xAA( SCGCQ00991202 ) 
 - BL: Tiger encounters fault 0x265D during boot( SCGCQ01045711 ) 
 - Marlin A0: HBA goes to hung state while sending diag reset( SCGCQ01084604 ) 
 - Unused return value of flash write function	( SCGCQ01091183 ) 
 - Ventura: bldnvme.bat is still referencing raw.fw	( SCGCQ01183481 ) 
 - NVDATA config option to disable PL Virtual SES support( SCGCQ01251655 ) 
 - Code Review Defect for Code collab Id 6005( SCGCQ01343128 ) 
 - Incorrect Component ID definitions of CubR 35x24 and 35x28( SCGCQ01350510 ) 
 - Make Ventura UART work at 460800	( SCGCQ01367233 ) 
 - Jetstress Performance Regression with RAID10 and Single Driver R0( SCGCQ01381091 ) 
 - Code review AI( SCGCQ01382101 ) 
 - Disable all error recoveries on EPD-PT for host IO's	( SCGCQ01389003 ) 
 - Host TM test framework fixes and adding the hostTM escalation framework( SCGCQ01389352 ) 
 - Handle timeout recovery for FPIO's in JBOD personality( SCGCQ01394886 ) 
 - MR 7.4 8G - RAID to JBOD personality after Cn caused "Assertion failure in ../../cfg/cfgisup.c at line 3783: wIndex==0"( SCGCQ01403998 ) 
 - Need to prevent conflicts between jbod mode, and jbod personality.( SCGCQ01405517 ) 
 - Remove IntNesting inc & dec from TimerISR as it is duplicate.( SCGCQ01406721 ) 
 - MR7.4: LDs disappear when changing controller profile (from profile 10 back to profile 12( SCGCQ01413560 ) 
 - IMR 7.4 : Kill adapter during cable push/pull( SCGCQ01420821 ) 
 - Unable to change personality	( SCGCQ01421114 ) 
 -	( SCGCQ01441140 ) 
 - 9460-8i card connect drive through direct-attached backplane: error LED not on when drop out a drive.( SCGCQ01445040 ) 
 - FW hit killer adapter while I/O and Jammer running( SCGCQ01445237 ) 
 - Single Thread MSI-X and MCTP accesses( SCGCQ01446273 ) 
 - MR74 iMR Assertion failure in ../../raid/cache.c at line 4461( SCGCQ01447442 ) 
 - BCA Cable Detection / Port Mapping Issue	( SCGCQ01448400 ) 
 - vSES Target: Incorrect Sense Data for REQUEST SENSE Command( SCGCQ01451678 ) 
 - [PL]74Alpha: Crusader iMR multipath cable pull/push hit taskman line 342 on 48 JBODs	( SCGCQ01452339 ) 
 - Ventura MR - MR 7.4 not discovering NVMe devices	( SCGCQ01453903 ) 
 - MR 7.4 - PDs pull/push led to "PD INSERT DEFERRED.. PD REMOVAL of PD X in PROGRESS" KA mon_task	( SCGCQ01454152 ) 
 - WG:Pausing progress operation and resuming shows it starting from 0 again and abruptly moves to actual progress after a while( SCGCQ01454613 ) 
 - MR7.4 MonTask: line 120 in file ../../raid/utils.c rst=1 When Starting CC after double media error injection to 2 NVMe drives( SCGCQ01454617 ) 
 - pl: backend PCIe: erroneous address pool copy( SCGCQ01455651 ) 
 - Debug Levels in unmap code path	( SCGCQ01455974 ) 
 - [PL]MR 7.4 imr IO on JBOD and VDs then cable pull push see some IO stop as found VDs offline	( SCGCQ01464997 ) 
 - Move resetTypeFromCCR to NVRAM for access during SOD.( SCGCQ01467122 ) 
 - pl: NVMe: 6001 fault	( SCGCQ01468144 ) 
 - 930-16i Cannot Spinup HDD During System Power On	( SCGCQ01470741 ) 
 - SATL: Security Protocol Erase fails in SATL, but works well with ATA PT.	( SCGCQ01479409 ) 
 - MR: Loading SBR with OFU causes system hang	( SCGCQ01479700 ) 
 - pl: NVMe: task management timeout may occur	( SCGCQ01480646 ) 
 - pl: NVMe: switch attached devices not detected under Windows	( SCGCQ01487291 ) 
 - passCount not incremented for Ctlr Self Diag Link Test( SCGCQ01505906 ) 
 - web UI is exposing personality change option for iMR controller( SCGCQ01512359 ) 
 - 7.5 iMR IO false divert due to SlotCount.( SCGCQ01514114 ) 
 - MR7.5: Firmware hit exception handler when clearing config or delete VD using nvme on 9440-16i( SCGCQ01518347 ) 
 - Win/Lin MR 7.5 Alpha/Beta R0,1,5,6; 5%-9% is seen in SR,SW IOs-4K-32K,QDs (1,4,16,64	( SCGCQ01538207 ) 
 - Change CmdIgnoreLdUnitAttention(	( SCGCQ01545274 ) 
 - I2C bus disable bit is not set when nvdata requests to disable( SCGCQ00139235 ) 
 - plFpeiAddIOTimer needs to use a unique fault code in its call to PL_VALIDATE_MID. This is provide support for faster debug from customer site.( SCGCQ00170054 ) 
 - IOP CLI command iop show tlb displays incorrectly( SCGCQ00173993 ) 
 - Fix for updating PCIe speeds in config page IO UNIT PAGE 7.	( SCGCQ00193001 ) 
 - Incorrect PCI Sub-class Code Causes Failure During Windows WHQL Testing( SCGCQ00203666 ) 
 - Update PLB Snooping config for SASCore to set bit11 instead of bit 8 for config bits.( SCGCQ00257436 ) 
 - (IOP	( SCGCQ00382561 ) 
 - Incorrect default setting for LinkFlags field for PCIe phy in PCIe IO Unit Page 1 Configuration Page	( SCGCQ00589097 ) 
 - Ventura: iopiMemoryMove shouldn't call pliControlRequest to get host page size every time.( SCGCQ00712297 ) 
 - Make _PLI_PCI_ADDRESS_POOL_ELEMENT a multiple of 8 bytes in size	( SCGCQ00853335 ) 
 - IOP: Build fails with missing define in GPIO code( SCGCQ00914704 ) 
 - Aero build fails due to out of date Nvdata file.	( SCGCQ01122630 ) 
 - RMC: Handling of PLL reset does not meet timing specified in PLL datasheet.( SCGCQ01319599 ) 
 - Fix the prodIdentification( SCGCQ01374781 ) 
 - RAID VDs become foreign following more than one reboot( SCGCQ01386126 ) 
 - Disable fast path when Unit Attention is active on the EPD-PT( SCGCQ01389657 ) 
 - pl: NVMe: additional errors occur after NVMe init failure( SCGCQ01392157 ) 
 - MR-7.4 PA2: Extra disk reported in Disk Manager( SCGCQ01392353 ) 
 - pdRef filled incorrectly in bvd->Physical_Disk_Sequence[] causing DDF to skip added PD in Recon( SCGCQ01400343 ) 
 - MR-7.4-PreAlpha: Without any config cannot set ctlr to RAID from JBOD personality on Windows 2012 R2	( SCGCQ01404419 ) 
 - Dev testing defects from Storcli.( SCGCQ01405201 ) 
 - MR7.4 PA2 Talla16i ROP 621: KA on target reset( SCGCQ01408002 ) 
 - Unable to set security Key( SCGCQ01410223 ) 
 - 7.4 Profile Switch behavior with respect to WB volume( SCGCQ01413375 ) 
 - 7.4:240pds JBOD-mode: create/delete config hit raidpci.c line 2550( SCGCQ01423692 ) 
 - MR 7.4 BST : Drives become UBAD when reboot server or OCR with BST setup : Personality mode with Profile 23( SCGCQ01434065 ) 
 - MR 7.4 - FW hit KA while IOing( SCGCQ01442985 ) 
 - Add a check to port NVRAM changes related to upgrade/downgrade issue	( SCGCQ01473175 ) 
 - MegaRAID with MCTP PCIe VDM not able to be rediscovered by BMC Emulator's MCTP service( SCGCQ01473240 ) 
 - MR7.5: FW hit assertion failure when booting up with enclosure attached( SCGCQ01507024 ) 
 - Fix Temperature Throttling in Ventura( SCGCQ01510251 ) 
 - MR7.3.1 : iMR FW locks up and PSOD seen while trying to flash MR7.2.1 FW ROP	( SCGCQ01516986 ) 
 - (MEMCFG only	( SCGCQ00138834 ) 
 - I2C slave address is only assigned to bus 0 and 2( SCGCQ00139212 ) 
 - Invader A0: The controller is reset when a MPT power management global change request is issued.( SCGCQ00212977 ) 
 - Fix issues encountered while unit testing non read write native SGL handling	( SCGCQ00468465 ) 
 - pl: Unbounded wait in plPhyClearErrorRegisters() SCGCQ00768573 ) 
 - Structures not packed due to U64 type definations being different( SCGCQ00853897 ) 
 - IOP: Fix build errors( SCGCQ00862262 ) 
 - Address performance issue for CPU intensive profiles.( SCGCQ01522492 ) 
 - Patrol read progress pause when user try to change profile( SCGCQ01614870 ) 
 - Drives are reverted back to JBOD after perfoming instant secure erase( SCGCQ01615777 ) 
 - Fix personalityChangeReqPending for an OCR case	( SCGCQ01384904 ) 
 - Fix for FW keeps reporting missing config in JBOD mode after switching from RAID mode and Clear Config( SCGCQ01386114 ) 
 - Add MrParamPage1 and test MrParamPage1.( SCGCQ01394514 ) 
 - Enable Security on EPDs	( SCGCQ01398337 ) 
 - EPDs secured by SafeSTOR and 3rd Party tool( SCGCQ01399100 ) 
 -	( SCGCQ01464221 ) 
 - FW does not respond to MCTP packets when BIOS is disabled (BMC emulator( SCGCQ01473945 ) 
 - address merge conflict from 73rc to 73lenovo	( SCGCQ01499771 ) 
 - Auto rebuild does not start when HS has PF( SCGCQ01509537 ) 
 - [OOB]RMC/MR Crash Due to PCE Core Register Access Errata during vSAN certification Test( SCGCQ01521255 ) 
 - NVDATA for iMR has maxChainedEnclosures set to 10; should be set to 2( SCGCQ01598760 ) 
 - After FW update, controller was not reset by the OCR command, and if user retries the command, then FW hits the exception( SCGCQ01639394 ) 
 - Not able to set max no of PD using set patrol read properties in LSA/Storcli	( SCGCQ01671189 ) 
 - Too many Unexpected Sense : "1/0/1d " logged for SATA drives	( SCGCQ01714261 ) 
 -	( SCGCQ01417586 ) 
 - MR_7.3.1_Firmware hangs in discovery	( SCGCQ01484421 ) 
 - LAS does not show proper state of secured locked drives.	( SCGCQ01615781 ) 
 - IR: Fast resync turned off when pulling a path in a multipath system	( SCGCQ00136963 port of SCGCQ00127015 ) 
 - 8618 fault is hit with ph-6 firmware during volume rebuilding( SCGCQ00138307 port of SCGCQ00138131 ) 
 - Add 64-bit multiplication, division, and modulus functions to PL	( SCGCQ00138469 port of SCGCQ00138467) 
 - Add 64-bit multiplication, division, and modulus functions to PL	( SCGCQ00138470 port of SCGCQ00138467) 
 - (RMTFLASH only	( SCGCQ00141237 port of SCGCQ00141235) 
 - IR MP: Fault 8405 encountered if resyncing disks is removed.	( SCGCQ00141639  port of SCGCQ00140613) 
 - False Warning device type message if SATA and SAS VDs co-exist( SCGCQ00142463 port of SCGCQ00083799) 
 - IOP: Diagnostic Console xget commands fixed	( SCGCQ00149248 port of SCGCQ00146562) 
 - Typo in SATA init code could result in wrong block size reported for non-512 SATA drives	( SCGCQ00150247 port of SCGCQ00146128) 
 - Removing dead code for volume inline update	( SCGCQ00150518 port of SCGCQ00145728) 
 - Flashing a thunder bolt or meteor with DDR enabled FW cause a 1808 fault followed by a recursive 265d fault	( SCGCQ00151261 port of SCGCQ00143378) 
 - UART console does not show 8k-bit SBR correctly	( SCGCQ00153299 port of SCGCQ00147843) 
 - (IOP-Only	( SCGCQ00153306 port of SCGCQ00144646) 
 - pl: SATL: Support write buffer mode 7.	( SCGCQ00153476 port of SCGCQ00148567) 
 - IR: (IR only	( SCGCQ00153683 port of SCGCQ00125128) 
 - Support exiting self-refresh mode in DDR3 library, for battery backed implementations( SCGCQ00153708 port of SCGCQ00151472) 
 - Customer requested change to DCR requirement placed on IOP by DDR3 library( SCGCQ00153709 port of SCGCQ00147761) 
 - Thunderbolt SysDma fails to read or write DDR3	( SCGCQ00153725 port of SCGCQ00145561) 
 - IOP: Change Start of Day memory allocation for Raid Accelerator request queues( SCGCQ00153763 port of SCGCQ00102813) 
 - IOP: DNS lookup feature in Ethernet Firmware Download does not handle errors properly( SCGCQ00153866 port of SCGCQ00141822) 
 - Ethernet: Unable to open new Telnet session after closing 3 simultaneous Telnet sessions	( SCGCQ00154723 port of SCGCQ00148547) 
 - Method to prevent drivers from resetting firmware during large CLI command	( SCGCQ00154736 port of SCGCQ00147885) 
 - Ethernet: Exiting Telnet sessions may cause firmware fault	( SCGCQ00154855 port of SCGCQ00149405) 
 - Ethernet Link Up/Down Handling	( SCGCQ00154872 port of SCGCQ00135540) 
 - UART commands addition for USB stack library interactions	( SCGCQ00154928 port of SCGCQ00147712) 
 - Thunderbolt: Increase max message frame to 1008	( SCGCQ00155272 port of SCGCQ00151477 ) 
 - Make miniDMA functionality into a stand alone library	( SCGCQ00155289 port of SCGCQ00145202) 
 - PL: Add compile option to fault when Discovery detects Discovery Error 0x90 (SMP Timeout	( SCGCQ00155434 port of SCGCQ00149166) 
 - USB code review changes	( SCGCQ00155947 port of SCGCQ00149031) 
 - IOP USB Test help menu is incorrect	( SCGCQ00157530 port of SCGCQ00150264) 
 - Firmware hangs after any MSC operation when no USB Drive attached	( SCGCQ00157768 port of SCGCQ00149313) 
 - Phase 8: IR: Misleading comments in Setting and clearing data Scrub allowed flag	( SCGCQ00159372 port of SCGCQ00155425) 
 - Fix debug print param count mismatches and add compile-time assertion which detects mismatches	( SCGCQ00159373 port of SCGCQ00156731) 
 - IR Load Balancing	( SCGCQ00159374 port of SCGCQ00154962) 
 - USB: Add comments to USB header	( SCGCQ00160105 port of SCGCQ00152373) 
 - USB library is not using correct IOP interface functions	( SCGCQ00160110 port of SCGCQ00151363) 
 - iop: iopidynmalloc(	( SCGCQ00160704 port of SCGCQ00153578) 
 - ManPage 8 Device Type BOOT_ROM and SEEPROM should be unique types( SCGCQ00160712 port of SCGCQ00151455) 
 - iop usb portstop halts firmware	( SCGCQ00160811 port of SCGCQ00149654) 
 - Don't fault if TM sent to an Expander	( SCGCQ00162814 port of SCGCQ00125874) 
 - (GEMINI	( SCGCQ00163396 port of SCGCQ00151857) 
 - (IOP-Only	( SCGCQ00163406 port of SCGCQ00157932) 
 - USB - CBW, CSW and Status incorrectly has only one instance for two ports	( SCGCQ00164453 port of SCGCQ00157667) 
 - USB - CBW, CSW and Status incorrectly has only one instance for two ports (duplicate of 157670	( SCGCQ00164468 port of SCGCQ00157670) 
 - USB - FW is not able to communicate with USB end device	( SCGCQ00164478 port of SCGCQ00157838) 
 - bld: Change enum TRACE to TRACEBUF	( SCGCQ00168226 port of SCGCQ00162009) 
 - PL: Add SAT translation of SCSI Unmap	( SCGCQ00168430 port of SCGCQ00143322) 
 - Extend Flash BIOS region to be 512 KBytes instead of the current size of 384 K	( SCGCQ00168435 port of SCGCQ00163940) 
 - Fix build all error with memcfg build	( SCGCQ00168442 port of SCGCQ00166402) 
 - Add temperature sensor read capability to uart	( SCGCQ00168563 port of SCGCQ00156735) 
 - PL: Add SAT translation of SCSI WRITE SAME with Unmap/Anchor	( SCGCQ00168595 port of SCGCQ00163761) 
 - MSCINIT command allocates only a sinlge structure instead of separate ones (For both USB ports	( SCGCQ00168680 port of SCGCQ00150531) 
 - IOP: SAS HD cable management support	( SCGCQ00169150 port of SCGCQ00159161) 
 - CSET: IR/WH: Performance improvements for very large IO sizes - (SCGCQ00152205	( SCGCQ00169767 port of SCGCQ00169767) 
 - Check in the syslog debug server to be used with tbolt	( SCGCQ00172036 port of SCGCQ00172035) 
 - SAS IO Unit page 6 length and data incorrect	( SCGCQ00172523 port of SCGCQ00162968) 
 - Add a check to avoid invalid function call that causes 265D fault when dumping configuration pages	( SCGCQ00172535 port of SCGCQ00171769) 
 -	( SCGCQ00172608 port of SCGCQ00165292) 
 - IR: Sense data incorrectly interpreted when the valid bit is set.( SCGCQ00172671 port of SCGCQ00170928) 
 - IOP: Need algorithm to handle copying boot up parameters where source and destination overlap.	( SCGCQ00172681 port of SCGCQ00169525) 
 - PL: Debug: Log Descriptor format sense data	( SCGCQ00172687 port of SCGCQ00169000) 
 - Allow Raid Accelerator if DDR memory isn't present	( SCGCQ00172755 port of SCGCQ00172276) 
 - (IOP-Only	( SCGCQ00177562 port of SCGCQ00161572) 
 - Reading Dma buffers via snapshot or UART while IOs are in progress	( SCGCQ00179463 port of SCGCQ00139946) 
 - DDR3: Training algorithm performance improvements	( SCGCQ00179991 port of SCGCQ00158325) 
 - IOP: Internal tools for use with DDR3 development	( SCGCQ00183664 port of SCGCQ00162983) 
 - IR: Repeated pulls/re-inserts of IR physical disk may cause 8109 fault	( SCGCQ00186472 port of SCGCQ00171520) 
 - Ethernet driver library	( SCGCQ00187588 port of SCGCQ00172827) 
 - IR: 8209 (IFAULT_IR_PD_ELM_NOT_FOUND	( SCGCQ00188498 port of SCGCQ00145932) 
 - Good status being returned on TM to missing SATA drive	( SCGCQ00188688 port of SCGCQ00159495) 
 - Substantial drop in allocated resources in phase 8	( SCGCQ00188774 port of SCGCQ00170571) 
 - (IOP-Only	( SCGCQ00188777 port of SCGCQ00176742) 
 - SATL: Need to update standard inquiry version descriptors	( SCGCQ00188781 port of SCGCQ00168345) 
 - Change ISTWI API and toolbox ISTWI READ WRITE API return values	( SCGCQ00188872 port of SCGCQ00180331) 
 - DDR3: Library fails to compile when some flags are turned off	( SCGCQ00190922 port of SCGCQ00179269) 
 - Diagnostic CLI Tool Returns Amount DMA'd on the overflow of the Host SGL	( SCGCQ00192197 port of SCGCQ00174823) 
 - 265D fault when posting a trace buffer after printing the ring buffer	( SCGCQ00192211 port of SCGCQ00187116) 
 - Duplicate data appears at start of diagnostic trace buffer	( SCGCQ00193239 port of SCGCQ00187262) 
 - Drives are not shown after flashing NB IT or IR pre-Alpha phase 10 image.	( SCGCQ00193241 port of SCGCQ00183646) 
 - Need to use the same frame for the event and reply	( SCGCQ00193242 port of SCGCQ00186699) 
 - USB: Modify UPLI phy settings to work on board when 5v isn't available.	( SCGCQ00193407 port of SCGCQ00174424) 
 - USB: An off the shelf stick does not work at all	( SCGCQ00193411 port of SCGCQ00176446) 
 - Update to handle large out of range max host credit setting in manufacturing page 9.	( SCGCQ00200640 port of SCGCQ00186348) 
 - (SRIOV-Only	( SCGCQ00201901 port of SCGCQ00176744) 
 - (SRIOV-Only	( SCGCQ00202160 port of SCGCQ00176731) 
 - (SRIOV-Only	( SCGCQ00202275 port of SCGCQ00176743) 
 - (SRIOV-Only	( SCGCQ00202289 port of SCGCQ00182855) 
 - (SRIOV-Only	( SCGCQ00203045 port of SCGCQ00176745) 
 - (SRIOV	( SCGCQ00203077 port of SCGCQ00152259) 
 - Ph11 IR: Cannot create/activate foreign volume if a native FAILED volume with no drive exists( SCGCQ00203875 port of SCGCQ00194882) 
 - Add newline after "NvdataVersion is"	( SCGCQ00203981 port of SCGCQ00190207) 
 - Remove warpdrive tag and unnecessary code from iButton code	( SCGCQ00204071 port of SCGCQ00183856) 
 - (SRIOV-Only	( SCGCQ00204098 port of SCGCQ00185967) 
 - IOP: fix minor bugs for CLI to display VF statistic info	( SCGCQ00204177 port of SCGCQ00190839) 
 - 0501 fault occurs after sending "iop show cfg all" command via uart	( SCGCQ00204206 port of SCGCQ00187446) 
 - (IOP-Only	( SCGCQ00204224 port of SCGCQ00163806) 
 - (NVDATA	( SCGCQ00204227 port of SCGCQ00185661) 
 - Activating a foreign volume results in 0x830A fault if a native FAILED volume with no drive exists( SCGCQ00207006 port of SCGCQ00194668 ) 
 - (NVDUMP only	( SCGCQ00209226 porrt of SCGCQ00189461) 
 - (FWHEAD Utility	( SCGCQ00209249 port of SCGCQ00192997) 
 - (PL&IOP	( SCGCQ00218354 port of SCGCQ00203441) 
 - Entire topology goes missing while injecting errors into DMA Setup FIS( SCGCQ00218404 port of SCGCQ00203694) 
 - USB: Add a command tag for requests/completions	( SCGCQ00224540 port of SCGCQ00188808) 
 - Add API's for Interrupt Handlers and Forces write check using DDR3/Tbolt	( SCGCQ00224791 port of SCGCQ00200272) 
 - Erase flash command syntax is given incorrectly in UART	( SCGCQ00225384 port of SCGCQ00203575) 
 - 0x707 fault on OEM specific PL log entry when HBA is host booted	( SCGCQ00228184 port of SCGCQ00207196) 
 - IR/WH: Performance improvements for very large IO sizes	( SCGCQ00228540 port of SCGCQ00152205) 
 - CSET: Improve the performance of adaptive heuristic queue depth algorithm - (SCGCQ00226755	( SCGCQ00235366 port of (SCGCQ00226755)) 
 - Child: Add PI to IR: Volume IOs	( SCGCQ00235422 port of SCGCQ00194010) 
 - Child: Add PI to IR: BGI Changes - Handle IO during BGI	( SCGCQ00235423 port of SCGCQ00194021) 
 - Child: Add PI to IR: Compatibility Checks	( SCGCQ00235605 port of SCGCQ00194024) 
 - Write cache value unchanged	( SCGCQ00235613 port of SCGCQ00143320) 
 - PI error occur during BGI for PI volumes	( SCGCQ00235620 port of SCGCQ00210546) 
 - When checking for PI error, sense key is not checked	( SCGCQ00235622 port of SCGCQ00210616) 
 - It may be possible for the volume's PI flag to be out of sync with the phys disks's flags	( SCGCQ00235623 port of SCGCQ00212995) 
 - Improve structure of checking for PI support	( SCGCQ00235654 port of SCGCQ00215883) 
 - DPICZ Required Flag not working as expected	( SCGCQ00235656 port of SCGCQ00216568) 
 - Non-PI volume is activated as PI	( SCGCQ00235661 port of SCGCQ00221023) 
 - RAID1E not working properly	( SCGCQ00235662 port of SCGCQ00218684) 
 - Child: Add PI to IR: Data Scrub	( SCGCQ00237159 port of SCGCQ00194034) 
 - 0x265D Fault Doing RAID Passthrough to a Hot Spare or Raw Disk	( SCGCQ00237596 port of SCGCQ00217042) 
 - DDR Write level training fails during initialization	( SCGCQ00237706 port of SCGCQ00208449) 
 - Child: Add PI to IR: BGI Changes - Add RAID0 Initialization	( SCGCQ00237873 port of SCGCQ00194019) 
 - Child: Add PI to IR: MDC and Resync	( SCGCQ00237885 port of SCGCQ00194036) 
 - IR: For IR Log IOPI_LOG_CODE_LD_BGI_CORRECTED_MEDIUM_ERROR LdLBA value is not correct for RAID1E/10	( SCGCQ00237886 port of SCGCQ00219886) 
 - FUA bit is not set for the Host Ios during BGI	( SCGCQ00237889 port of SCGCQ00221336) 
 - OCE is not happening as expected, after firmware upgrade from ph2.5 to ph10	( SCGCQ00238010 port of SCGCQ00192386) 
 - Gen2 FW Ph10 - Roaming of > 2TB SATA volume drives from SAS1 to SAS2 cards, shows the volume drives as bare drives.	( SCGCQ00238011 port of SCGCQ00189445) 
 - Ph12 FW: 8401 faults hits while removing a volume from the controller	( SCGCQ00238012 port of SCGCQ00223345) 
 - Fault 8405 when a drive removed from a PI volume during BGI	( SCGCQ00238283 port of SCGCQ00221611) 
 - IR: Adaptive HQD for R1/R10 for load balancing	( SCGCQ00238383 port of SCGCQ00193113) 
 - Sense data for the >2TB SAS drive remains in fixed format only & no change is seen to descriptor format	( SCGCQ00238405 port of SCGCQ00188760) 
 - (DDR3	( SCGCQ00238562 port of SCGCQ00225388) 
 - 5861 fault after link related parity errors	( SCGCQ00240778 port of SCGCQ00183364) 
 - BIOS Page 4 not behaving per MPI specification	( SCGCQ00246850 port of SCGCQ00227809) 
 - (IOP-Only	( SCGCQ00250540 port of SCGCQ00221349) 
 - Remove second physical function references from h/w header files	( SCGCQ00250725 port of SCGCQ00168552) 
 - Build: create symbol and structure dump files	( SCGCQ00250747 port of SCGCQ00231195) 
 - Add NVDATA bit to disable Notify(Enable Spinup	( SCGCQ00250752 port of SCGCQ00208630) 
 - (BUILD-Only	( SCGCQ00253252 port of SCGCQ00193624) 
 - Disable the internal HW interrupt to the FW for receiving the BROADCAST(Change	( SCGCQ00254237 port of SCGCQ00204210) 
 - Uart commands are available via Toolbox Diagnostic CLI Tool after a firmware fault	( SCGCQ00254429 port of SCGCQ00220613) 
 - Correct fault code & log info comments & spelling	( SCGCQ00254921 port of SCGCQ00229108) 
 - pl: SATL: Add handling of security locked state	( SCGCQ00257362 port of SCGCQ00223621) 
 - Assign all targets and SSP initiators to a non-zero DMA Group	( SCGCQ00259862 port of SCGCQ00235650) 
 - Embedded strings in host trace are corrupted	( SCGCQ00269272 port of SCGCQ00238503) 
 - IOC state transition and Interrupt bit cleaning issue by MUR Issue	( SCGCQ00279891 port of SCGCQ00245892) 
 - (BUILD	( SCGCQ00280059 port of SCGCQ00238155) 
 - IOP: Remove un-needed I2C ring buffer print in I2C Write	( SCGCQ00280168 port of SCGCQ00235614) 
 - A diag reset is issued by the driver when resync starts on a RAID 1 volume.	( SCGCQ00292969 port of SCGCQ00269340) 
 - Fault 0x8111 seen while Activating a Degraded Raid 10 Volume	( SCGCQ00294706 port of SCGCQ00237555) 
 - Reassign Block command fails with check condition 5/1A/00	( SCGCQ00294979 port of SCGCQ00242855) 
 - PI error reported when PI error detected due to a frame CRC error( SCGCQ00314686 port of SCGCQ00262937) 
 - (DDR3	( SCGCQ00314711 port of SCGCQ00235393) 
 - One of the inactive volumes member becomes offline/missing	( SCGCQ00316967 port of SCGCQ00283314) 
 - Event for BGI started ('2F'	( SCGCQ00316968 port of SCGCQ00282792) 
 - When ios are running with cable break and make (b/w expander and drive	( SCGCQ00316969 port of SCGCQ00280375) 
 - Internal Task Management events aren't blocked for IR	( SCGCQ00316975 port of SCGCQ00237568) 
 - SAS2 IT - Phase 14 – Request Sense SCSI Command data is incorrect for a SATA Drive During Stanby Power Condition Mode( SCGCQ00317952 port of SCGCQ00283312) 
 - Update field offsets of GPIOs above GPIOs 32.( SCGCQ00320004 port of SCGCQ00177385) 
 - (DDR3	( SCGCQ00320041 port of SCGCQ00257631) 
 - Truncated Data is Obtained When SCSI Inquiry to VPD Page 0xB0 is Executed	( SCGCQ00320058 port of SCGCQ00285500) 
 - Some host trace buffers don't decode properly( SCGCQ00320157 port of SCGCQ00235357) 
 - Change text for "iop show cfg" to show or 	( SCGCQ00321281 port of SCGCQ00257451) 
 - PL: Configurable AWT for Expanders	( SCGCQ00335507 port of SCGCQ00241199) 
 - (DDR3	( SCGCQ00335517 port of SCGCQ00295262) 
 - Ph15 SAS2 IR Firmware: Hotspare does not resync with second raid volume when both the volumes are in degraded state	( SCGCQ00336453 port of SCGCQ00333684) 
 - Toolbox Clean Tool does not work with phase 11 FW	( SCGCQ00434174 port of SCGCQ00220095) 
 - Define config page ranges to be used by various projects (no code change	( SCGCQ00434182 port of SCGCQ00293081) 
 - PL: Configurable SMP retries	( SCGCQ00437960 port of SCGCQ00271092) 
 - Invader: Enable SAS Core Parity Interrupts	( SCGCQ00449638 port of SCGCQ00361839) 
 - Remove power management control flags from Manufacturing Page 3	( SCGCQ00450890 port of SCGCQ00293362) 
 - Invader C0: Firmware should fault if a parity error is deteced while reading asynchronous event from fast path hardware.	( SCGCQ00451375 port of SCGCQ00377564) 
 - Invader B0: Firmware not using correct start address while handling data overrun interrupt	( SCGCQ00462166 port of SCGCQ00351468) 
 - Invader: Fixed Issue Found in Data Overrun Testing Where IOs Were Being Incorrectly Completed( SCGCQ00463429 port of SCGCQ00363670) 
 - IOP: Firmware does not react to OCM interrupt	( SCGCQ00465082 port of SCGCQ00377585) 
 - Firmware download via rFTP fails on large images	( SCGCQ00467609 port of SCGCQ00234446) 
 - Changed Value Set for RAID Engine Polynomial for RAID6	( SCGCQ00468672 port of SCGCQ00343306) 
 - Serdes settings to fix 12G SSC profile	( SCGCQ00468679 port of SCGCQ00343925) 
 - (IOP	( SCGCQ00469157 port of SCGCQ00377964) 
 - Fault 0x820 on cold boot	( SCGCQ00469444 port of SCGCQ00380312) 
 - IOP: 0x000B fault( SCGCQ00469667 port of SCGCQ00193071) 
 - Add Uart diag cmd to read and write GPIO.( SCGCQ00469768 port of SCGCQ00200629) 
 - Syslog server script chops off end of string	( SCGCQ00471486 port of SCGCQ00365924) 
 - (IOP	( SCGCQ00471989 port of SCGCQ00384661) 
 - Added support for AUTO RESERVE on I2C toolbox request.	( SCGCQ00472600 port of SCGCQ00349976) 
 - (GEMINI	( SCGCQ00472914 port of SCGCQ00146873) 
 - WA for [invader]1752	( SCGCQ00472980 port of SCGCQ00355461) 
 - Program the pre-loaded preset used to lock-in the bitstream at the start of Tx Training	( SCGCQ00473943 port of SCGCQ00354681) 
 - Transmitter Training Part 1	( SCGCQ00474680 port of SCGCQ00357497) 
 - The IOCStatus returned for ToolBox I2C requests is incorrect.	( SCGCQ00475527 port of SCGCQ00353295) 
 - Messaging unit security configuration fails	( SCGCQ00476784 port of SCGCQ00348956) 
 - PCIe SerDes registers inaccessible over AHB bus	( SCGCQ00476819 port of SCGCQ00364456) 
 - Update release script to release raw FW with useful names	( SCGCQ00477176 port of SCGCQ00354759) 
 - Transmitter Training Part 2	( SCGCQ00480619 port of SCGCQ00364214) 
 - Invader C0: Performance drops with PL version 0.250.113.0 on 2 R0 volumes behind Cobra	( SCGCQ00494101 port of SCGCQ00400569) 
 - PL: Check iopiMemoryMove(	( SCGCQ00498849 port of SCGCQ00419472) 
 - PL: SAT3 Compliance - Implement Translation of Set Timestamp Command (Disabled	( SCGCQ00503815 port of SCGCQ00357128) 
 - PL: SAT3 Compliance - Implement Translation of Report Timestamp Command (Disabled	( SCGCQ00528525 port of SCGCQ00357126) 
 - (IOP	( SCGCQ00552411 port of SCGCQ00375164) 
 - IOP: Log Entry SubVendorID not set properly	( SCGCQ00552462 port of SCGCQ00391022) 
 - PL: SAT3 compliance - Support additional modes for Write Buffer command translation (Disabled( SCGCQ00553455 port of SCGCQ00357130) 
 - PL: SAT3 compliance - Support for ATA EPC in SCSI Start Stop Unit command translation.( SCGCQ00553489 port of SCGCQ00357136) 
 - PL: SAT3 Compliance – Implement Power Condition Mode Page translation with ATA EPC.	( SCGCQ00553528 port of SCGCQ00406792) 
 - (IOP-only	( SCGCQ00556108 port of SCGCQ00298490) 
 - PL Host Based Discovery updates for Gen 3	( SCGCQ00556327 port of SCGCQ00395436) 
 - PL: Move temperature sensor init code down to PL	( SCGCQ00556330 port of SCGCQ00410822) 
 - (IOP	( SCGCQ00563042 port of SCGCQ00419437) 
 - IOP: DPA Capability number of D0 states programmed incorrectly	( SCGCQ00563332 port of SCGCQ00396420) 
 - IOP: I2C master wastes time doing an I2C write packet	( SCGCQ00563335 port of SCGCQ00411656) 
 - Recreation of persistent Config Pages fails after full erase	( SCGCQ00563339 port of SCGCQ00397870) 
 - IOP: SR-IOV: Firmware fails to reply to Set Visibility command request message	( SCGCQ00563409 port of SCGCQ00419034) 
 - IOP: SR-IOV visibility modification causes fault 0x060D	( SCGCQ00563411 port of SCGCQ00423670) 
 - (IOP	( SCGCQ00563421 port of SCGCQ00435265) 
 - IOP: Handle miscellaneous PCI-Express core interrupts	( SCGCQ00564303 port of SCGCQ00412062) 
 - IOP: Sideband Create initial support for SMBus/I2C binding for MCTP	( SCGCQ00565507 port of SCGCQ00394111) 
 - IOP: PCIe link speed and receiver errors	( SCGCQ00566083 port of SCGCQ00396364) 
 - IO on a SATA SSD configured as JBOD pending with PL does not complete	( SCGCQ00566089 port of SCGCQ00407250) 
 - IOP: I2C DMA Complete interrupt does not trigger after Master mode transmission of unacknowledged consecutive large packet	( SCGCQ00566094 port of SCGCQ00418148) 
 - IOP: Memory Coherency not enabled in Detroit	( SCGCQ00566099 port of SCGCQ00432917) 
 - Invader: The CLI commands need to have their text consistent.( SCGCQ00566120 port of SCGCQ00457380) 
 - iop pci commands need to be updated to use dword instead of word to be consistent( SCGCQ00566123 port of SCGCQ00457386) 
 - Invader: pl fpe mgrdstt cannot be called. pl fpe mgrds gets called instead.	( SCGCQ00566133 port of SCGCQ00457412) 
 - Invader C0: PCIe Compliance test failing because DPA Transition Latency offsets in firmware and the Trident EDS are incorrect( SCGCQ00566137 port of SCGCQ00460941) 
 - Update coalescing setup for Combined Reply Queue mode( SCGCQ00566160 port of SCGCQ00476245) 
 - Subsystem Device ID should match the Device ID in default NVData files	( SCGCQ00566161 port of SCGCQ00476286) 
 - PL: Fault 0x6001 while running heavy IOs and performing cable break of the initiator port.	( SCGCQ00566162 port of SCGCQ00479492) 
 - (IOP	( SCGCQ00566167 port of SCGCQ00484049) 
 - FW trace released when the Operational state	( SCGCQ00566193 port of SCGCQ00526257) 
 - PL: Turn SSC on by default in the NVDATA for C0 silicon.	( SCGCQ00566214 port of SCGCQ00415063) 
 - Controller Initialization: Fault if SBR values were not loaded from SEEPROM	( SCGCQ00566218 port of SCGCQ00426920) 
 - Update SAS9300-8i IT NVDATA for Channel configuration requirements	( SCGCQ00566220 port of SCGCQ00436396) 
 - Security: Signed firmware update	( SCGCQ00566227 port of SCGCQ00462139) 
 - Enclosure/Slot based re-ordering of SAS Topology List Event	( SCGCQ00566231 port of SCGCQ00472198) 
 - Check iopiMemoryMove(	( SCGCQ00566243 port of SCGCQ00476305) 
 - IOP debug string cleanup	( SCGCQ00566258 port of SCGCQ00485420) 
 - Invader: Remove A0 support in firmware	( SCGCQ00566260 port of SCGCQ00488494) 
 - Allow users to select Transmitter Training preset in NVDATA	( SCGCQ00566264 port of SCGCQ00501485) 
 - Add Temperature Monitoring Capability	( SCGCQ00567337 port of SCGCQ00168446) 
 - IOP: Add descriptions for errata that has not been worked around	( SCGCQ00568404 port of SCGCQ00422101) 
 - ONFI: Minor updates to the ONFI diag commands	( SCGCQ00568411 port of SCGCQ00448626) 
 - Add MR PL builds with Target Mode enabled	( SCGCQ00568412 port of SCGCQ00457382) 
 - Add lwIP license file to release file	( SCGCQ00568413 port of SCGCQ00468546) 
 - IOP: Update PCIe SERDES with improved settings	( SCGCQ00568481 port of SCGCQ00408335) 
 - (IOP	( SCGCQ00568489 port of SCGCQ00370060) 
 - SAS2IT: Incorrect SAT translation observed when sending a Security IN command with zero Allocation length with INC_512=1	( SCGCQ00568500 port of SCGCQ00452375) 
 -	( SCGCQ00572869 port of SCGCQ00421676) 
 - Intruder FPGA Release 2.0 interrupt map	( SCGCQ00685741 port of SCGCQ00681295) 
 - IOP: Target Mode performance improvements	( SCGCQ00711577 port of SCGCQ00685827) 
 - Target Mode: Task IU is sent to the IOP before it knows about the Initiator	( SCGCQ00725158 port of SCGCQ00606248) 
 - MCTP GET_INVENTORY returning wrong deviceType	( SCGCQ00725159 port of SCGCQ00615192) 
 - IOP: PowerPC ITLB Miss Errata Workaround	( SCGCQ00725162 port of SCGCQ00634879) 
 - 12G SAS BC train fails with 6M cable between Fury and Cobra	( SCGCQ00725164 port of SCGCQ00678053) 
 - PL: Incorrect use of IOP LogInfo code	( SCGCQ00725173 port of SCGCQ00709517) 
 - Invader: Update Fault and LogInfo codes based on Tech Pubs SEN 11218	( SCGCQ00725195 port of SCGCQ00531238) 
 - PL: Reduce IOC Link Up Initialization Time	( SCGCQ00725208 port of SCGCQ00414458) 
 - IOP: Successive resets may cause Invader/Fury to stop responding on PCIe	( SCGCQ00725216 port of SCGCQ00556766) 
 - Unexpected IOCStatus with invalid config page type	( SCGCQ00725229 port of SCGCQ00551008) 
 - Invader C0: MPI PM Global Request Change to Reduced or Standby state results in "Operation State Not Supported" or "IOC Busy"	( SCGCQ00725237 port of SCGCQ00584284) 
 - Invader C0: MPI PM IOC Change Request from 50% to 100%, IO Unit Page 7 says speed stays at 50%	( SCGCQ00725238 port of SCGCQ00584288) 
 - Interrupt coalescing stopped working with SAS3 driver version 2.50.65	( SCGCQ00725244 port of SCGCQ00593491) 
 - IOP: I2C Read of non-existent device causes infinite-loop and FW is stalled	( SCGCQ00725263 port of SCGCQ00673161) 
 - NVData: Update SBR to reflect new HW/SE recommendations	( SCGCQ00725275 port of SCGCQ00498550) 
 - DFE tuning	( SCGCQ00725276 port of SCGCQ00505626) 
 - SATL: Implemented Power Condition VPD Page (0x8A	( SCGCQ00725278 port of SCGCQ00524989) 
 - Implement means of saving critical OEM config data so that it can easily be persisted through a firmware down-rev.	( SCGCQ00725283 port of SCGCQ00566512) 
 - Compile out unnecessary debug strings	( SCGCQ00725285 port of SCGCQ00604550) 
 - Raid Accelerator IOs can hang if the stream of IOs suddenly stops	( SCGCQ00725307 port of SCGCQ00503412) 
 - NVData: MfgPg2 is configured for 16 Virtual Functions with non-SRIOV firmware	( SCGCQ00725327 port of SCGCQ00614550) 
 - IOP SR-IOV: Fault 0x265D seen when issuing Function Level Resets after a firmware fault	( SCGCQ00725330 port of SCGCQ00664517) 
 - IOP MCTP: Uninitialized variables need correcting	( SCGCQ00725331 port of SCGCQ00668686) 
 - IOP: Recursive fault may not report fault state to host	( SCGCQ00725337 port of SCGCQ00641946) 
 - IOP SR-IOV: Devices in SAS Topology Change List Event are incorrectly ordered	( SCGCQ00725338 port of SCGCQ00655407) 
 - IOP SR-IOV: Firmware fails to clear visibility settings on removed devices	( SCGCQ00725339 port of SCGCQ00668564) 
 - IOP: WA for Inbound Message Queue enable bit surviving resets in Trident with reset Inbound Message Queue regs	( SCGCQ00725343 port of SCGCQ00663100) 
 - Fixed multiple order of operation bugs	( SCGCQ00725346 port of SCGCQ00626966) 
 - IOP: PCIe Link Down can cause Transmit Margin field to not reset	( SCGCQ00725356 port of SCGCQ00663185) 
 - PL: Add fault code to indicate coding error in cable management code	( SCGCQ00725358 port of SCGCQ00668692) 
 - IOP SR-IOV: Controller reports 16 MSIx vectors in the MSIx Table Size field of the Config Space	( SCGCQ00725363 port of SCGCQ00655251) 
 - IOP: Incorrect PCIe SERDES settings	( SCGCQ00725364 port of SCGCQ00661564) 
 - IOC Fault 0x1609 by Message Unit Reset	( SCGCQ00725365 port of SCGCQ00582515) 
 - IOP SR-IOV: Reply Descriptor Post Queue Array from VFs during heavy load causes 0x0A05 fault	( SCGCQ00725371 port of SCGCQ00670932) 
 - IOP: MCTP: EIDAllocStatus and EIDAssignStatus in MCTP Control Set EID response swapped	( SCGCQ00725372 port of SCGCQ00675342) 
 - Inquiry SCSI Command is Not Failed with Expected Response When NACA bit in Control Byte is set during During Format	( SCGCQ00725376 port of SCGCQ00649572) 
 - IOP MCTP: Add support for VDM Buffers	( SCGCQ00725381 port of SCGCQ00626865) 
 - IOP MCTP: Add support for resetting EID in MCTP Control Set EID command	( SCGCQ00725382 port of SCGCQ00631600) 
 - Selective Extended Image Loading	( SCGCQ00725384 port of SCGCQ00595519) 
 - PL: Poll for parity error in FPE PLB Slave	( SCGCQ00725388 port of SCGCQ00645401) 
 - Add PL source build package into MR build script	( SCGCQ00755353 port of SCGCQ00715730) 
 - Firmware downgrade fails and firmware faults with code 0x070A	( SCGCQ00757685 port of SCGCQ00592281) 
 - IOP: Force sequence point evaluation	( SCGCQ00781306 port of SCGCQ00728929) 
 - IOP: Fault 0x265D hit when booting controller with attached enclosure	( SCGCQ00781332 port of SCGCQ00709712) 
 - IOP: MCTP: Miscellaneous transmission path issues	( SCGCQ00781335 port of SCGCQ00710168) 
 - Module Specific Resets 0 is missing the PBAM AI bit	( SCGCQ00781336 port of SCGCQ00710445) 
 - PL: Fix minor code issues found by analysis tool	( SCGCQ00781349 port of SCGCQ00728016) 
 - IOP: Diag Buffer Post request message with invalid BufferType field can cause unpredictable results	( SCGCQ00781352 port of SCGCQ00728152) 
 - IOP: DDR initialization may access invalid pointer	( SCGCQ00781355 port of SCGCQ00728153) 
 - IOP: Minor CLI defects	( SCGCQ00781362 port of SCGCQ00728908) 
 - IOP: Incorrect MaxChainDepth in IOC Facts response with disabled local chain HW	( SCGCQ00781367 port of SCGCQ00730628) 
 - PL: Firmware could be accessing null pointer in port layer interrupt handler.	( SCGCQ00781369 port of SCGCQ00730721) 
 - IOP: MCTP: I2C slave-response mode fails to fully complete initalization	( SCGCQ00781379 port of SCGCQ00757474) 
 - IOP: MCTP: Get Version, Get MsgType Support, and Get UUID MCTP Control Commands	( SCGCQ00781385 port of SCGCQ00679104) 
 - IOP: MCTP: Add support for MPI FW Upload Request	( SCGCQ00781387 port of SCGCQ00691019) 
 - NVDATA: Increase maximum supported ManPage13 entries from 16 to 32	( SCGCQ00781388 port of SCGCQ00695575) 
 - Allow MaxChainDepth as a configurable parameter in Manufacturing Page 9	( SCGCQ00781389 port of SCGCQ00696232) 
 - IOP: Deassert the HSB_N line when NVSRAM is available	( SCGCQ00781391 port of SCGCQ00705414) 
 - PL Target Mode: Implement multi reply queue handling of command buffers	( SCGCQ00781392 port of SCGCQ00709549) 
 - IOP: Controller does not respond to doorbell messages after faulting through the doorbell	( SCGCQ00781396 port of SCGCQ00764912) 
 - Update PL firmware to have capability to not fault on Rx/Tx DMA engine SYS_DMA error	( SCGCQ00785193 port of SCGCQ00678819) 
 - IOP: When flashing IT firmware with sas3flash DOS, the system hangs if the SAS address is included on the command line.	( SCGCQ00791427 port of SCGCQ00769327) 
 - IOP: Argument in print for SAS Topology Change has items reversed	( SCGCQ00793914 port of SCGCQ00780174) 
 - Controller (L85a Pollux installed to Dell servers R720XD / R820	( SCGCQ00793915 port of SCGCQ00702655) 
 - IOP: MPI Toolbox Clean Tool incorrect pointer arithmetic	( SCGCQ00793919 port of SCGCQ00730739) 
 - PL: PL code is not checking the return status of a function call	( SCGCQ00793925 port of SCGCQ00737080) 
 - IOP: SR-IOV firmware faults with lots of TM and outstanding IO	( SCGCQ00793933 port of SCGCQ00757482) 
 - Target Mode performance improvements	( SCGCQ00793943 port of SCGCQ00698205) 
 - IOP: MCTPMsg: Add command to obtain individual entries from Log Page 0 Config Page and Log Page 0 to ExtEvents	( SCGCQ00793945 port of SCGCQ00734303) 
 - PL: Yellow LED Function Code control LEDs using MfgPage13 for link up and link speed	( SCGCQ00793949 port of SCGCQ00741955) 
 - IOP: MCTPMsg: Add Sense Data support to MPI SCSI IOs	( SCGCQ00793950 port of SCGCQ00751428) 
 - IOP: MCTP: Add support for the Vendor Defined Message Support MCTP Control request	( SCGCQ00793952 port of SCGCQ00761033) 
 - PL: SATA Spinup Hinting	( SCGCQ00793954 port of SCGCQ00767301) 
 - Target Mode performance improvements	( SCGCQ00805047 port of SCGCQ00698205) 
 - IOP: MCTP: Comment flexibility improvement for I2C slave response mode	( SCGCQ00816408 port of SCGCQ00804070) 
 - IOP: Check for failure when DMAing diag buffer strings	( SCGCQ00816413 port of SCGCQ00787491) 
 - PL: Fault 0xD203 observed while releasing Diag Buffer (TRACE	( SCGCQ00816415 port of SCGCQ00792742) 
 - (DDR3	( SCGCQ00831254 port of SCGCQ00531317) 
 - New DDR3 library API to obtain ECC information and return it to the caller	( SCGCQ00831262 port of SCGCQ00333267) 
 - WW PL: Add MPI PCIe Device driver	( SCGCQ00832573 port of SCGCQ00795210) 
 - Config page write request for new SAS BIOS Page3 (NVRAM copy	( SCGCQ00836785 port of SCGCQ00829028) 
 - CSET: IOP: WA Config Trap Timer not fully clearing - (SCGCQ00836313	( SCGCQ00836879 ) 
 - Tiger WW: Add Storage Expansion Device interrupt handler and initialization	( SCGCQ00837237 port of SCGCQ00797527) 
 - Tiger WW: Change how remote SAS core interrupts are handled	( SCGCQ00837761 port of SCGCQ00798076) 
 - Tiger WW: Update SED MPI messages to 0.2 revision	( SCGCQ00841600 port of SCGCQ00831478) 
 - PL: Firmware should return an error if an invalid slot number is sent in a MPI SEP request	( SCGCQ00848133 port of SCGCQ00824715) 
 - IOP: MCTP: Cannot see drive add and remove events with I2C configuration	( SCGCQ00848142 port of SCGCQ00810264) 
 - IOP: MCTP: I2C interrupt not always cleared before exiting when in slave response mode	( SCGCQ00848201 port of SCGCQ00833480) 
 - Multiplexed I2C bus is switched too early	( SCGCQ00851640 port of SCGCQ00809980) 
 - Fix Loginfo Names and Comments	( SCGCQ00851646 port of SCGCQ00835465) 
 - UART: Add new test patterns to testmux test command	( SCGCQ00851655 port of SCGCQ00815682) 
 - IOP: When certain PCIe timeouts occur in the presence of Link Unavailable, a hang condition can occur	( SCGCQ00852084 port of SCGCQ00755510) 
 - The lock option of the Low Power self refresh command may cause system to hang upon reset after DDR fault.	( SCGCQ00858181 port of SCGCQ00857473) 
 - NVDump: SBR extraction creates incorrect SBR	( SCGCQ00861767 port of SCGCQ00859080) 
 - Coverity issues :IOP: MCTP: Event information not populated properly, uninitialized variables, NULL and Return Check missing.	( SCGCQ00871132 port of SCGCQ00852066) 
 - Gen-3 is not supporting SES Page 0x0A slot mapping mode fully	( SCGCQ00872845 port of SCGCQ00855132) 
 - System Hangs after Adapter reset with heavy IO load	( SCGCQ00875779 port of SCGCQ00646625) 
 - IOP: IT firmware faults with 0x1403	( SCGCQ00882243 port of SCGCQ00882204) 
 - PL: Check in Intruder A1 serdes setting	( SCGCQ00882320 port of SCGCQ00882269) 
 - IOP: Add code to stop additional hardware upon adapter reset	( SCGCQ00885542 port of SCGCQ00883655) 
 - PL: Fix FPE state machine transition flaw which could cause long I/O latency	( SCGCQ00885561 port of SCGCQ00884179) 
 - IOP: Low Level Workarounds for PCIe core compiled out	( SCGCQ00886309 port of SCGCQ00884738) 
 - IOP: 2622 fault while running stress test in CM	( SCGCQ00886311 port of SCGCQ00884076) 
 - NVDATA: Revise 9305-16e Partial NVDATA So it Matches Latest Schematic	( SCGCQ00887001 port of SCGCQ00885715) 
 - NVDATA: Revise 9305-24i/16i Partial NVDATA So it Matches Latest Schematic	( SCGCQ00887002 port of SCGCQ00885576) 
 - PL: Cleanup discovery code for improved maintainability	( SCGCQ00894149 port of SCGCQ00872750) 
 - New pliControlRequest to clear FPE bit in FPE flags of mid state table	( SCGCQ00894180 port of SCGCQ00817050) 
 - IOP: CLI Tool through doorbell not working when in fault state	( SCGCQ00894196 port of SCGCQ00875758) 
 - Selective Extended Image Loading	( SCGCQ00894703 port of SCGCQ00595519) 
 - PL: Use Dual Contexts in Tx Context Manager Only When Expanders Are Present	( SCGCQ00918136 port of SCGCQ00419356) 
 - IOP: MCTP: Seeing extra byte in second I2C packet of a message	( SCGCQ00925201 port of SCGCQ00916929) 
 - PL SATL: SCSI ATA Passthrough Code Should Check For Correct CDB Length	( SCGCQ00926753 port of SCGCQ00915201) 
 - IOP: False Reply Parity Error Firmware Workaround	( SCGCQ00929814 port of SCGCQ00927500) 
 - Tiger: Fix tiger release cmd file	( SCGCQ00948440 port of SCGCQ00948227) 
 - Tiger: add zip file for build, update version to avoid confusion with prior relorder	( SCGCQ00948441 port of SCGCQ00948409) 
 - IOP: MCTP: Bad CRC calculation for some Packet Exception Busy Retry responses	( SCGCQ01019764 port of SCGCQ01019438) 
 - SMR Host Aware and Host Managed drive support & ZBC to ZAC SATL	( SCGCQ01025897 port of SCGCQ00900453) 
 - The INQUIRY command over MCTP did not return the expected response data for an I2C attached SCSI enclosure processor based backplane	( SCGCQ01064022 port of SCGCQ00896512) 
 - Increase BIOS flash region from 512KB to 1MB for additional Boot Components	( SCGCQ01067775 port of SCGCQ01064581) 
 - Fast back-to-back or parallel PCIe configuration requests after certain addresses can generate bad Config Read data	( SCGCQ01070733 port of SCGCQ01047773) 
 - Build failure if MCTP is enabled and Config trap Hardware WorkAround is disabled.	( SCGCQ01084506 port of SCGCQ01075828) 
 - Add the Command line support to send the MCTP commands	( SCGCQ01084606 port of SCGCQ01064599) 
 - IOP: MCTP: I2C slave with high MPI request rate from host and BMC can cause a host request timeout	( SCGCQ01089469 port of SCGCQ01087653) 
 - Return EEDP/DIF error data of the first error frame detected by the hardware during READ in the MPI Reply error message frame	( SCGCQ01092128 port of SCGCQ01000193) 
 - PL: Discovery due to non responding SATA drive is now timed to last for the amount of seconds configured in NVDATA	( SCGCQ01092176 port of SCGCQ00996678) 
 - IOP: 'iop show cfg all' command is not listing all Expander's config pages	( SCGCQ01118590 port of SCGCQ01110070) 
 - IOP: MCTP: Cannot boot and discover controller with PCIe VDM and Bus Master Enable not set	( SCGCQ01132394 port of SCGCQ01107260) 
 - IOP: MCTP: Reply message may not contain expected data	( SCGCQ01154962 port of SCGCQ01154952) 
 - IOP: MCTP: application sees unexpected severe errors for removed/not registered drives and reset controller	( SCGCQ01158779 port of SCGCQ01150838) 
 - IOP: MCTP: Outstanding aborted SCSI IO due to too many PE Busy Retries is not being fully aborted within FW	( SCGCQ01167509 port of SCGCQ01167407) 
 - IOP: MCTP: Fix minor issues	( SCGCQ01172194 port of SCGCQ01171294) 
 - CSET: Upadate Intruder/Cutlass NVDATA for eval boards - (SCGCQ01134722	( SCGCQ01195990 ) 
 - EPMR12 : PR fails to continue on PD after a USER paused Patrol read is resumed after OCR.	( SCGCQ01198935 port of SCGCQ01130036) 
 - MRFW : Exception in Core 0 while importing Foreign Config with enclosure connections swapped.	( SCGCQ01198954 port of SCGCQ01117839) 
 - W fails to import DIF arrays, after changing enable PI controller property 0 -> 1	( SCGCQ01198958 port of SCGCQ01135815) 
 - Build the Flash Component List only if any of the image is flashed.	( SCGCQ01198964 port of SCGCQ01151384) 
 - IOP: MCTP: Heavy traffic from host with operations that take a long time can cause controller to stop acknowledging I2C transactions	( SCGCQ01203062 port of SCGCQ01196986) 
 - Linux,Intruder-eSDS-MR6.12 Replan RC: -6% to -15% Perf drop in all IO size with Higher QD in 12G SAS HDD [x16EC,x24EC,x40EC]	( SCGCQ01204998 port of SCGCQ01193231) 
 - Ventura PL: Add support to existing pli control request to do additional PL housekeeping for a stale MID	( SCGCQ01209109 port of SCGCQ01204327) 
 - Cutlass(16e and 24i	( SCGCQ01215350 port of SCGCQ01197319) 
 - New partial xml for 9400-8i8e channel HBA	( SCGCQ01217319 port of SCGCQ01217035) 
 - IOP: MCTP I2C: FW Download sometimes causes controller to be unresponsive	( SCGCQ01220370 port of SCGCQ01219591) 
 - PL: Support slot numbers starting at an arbitrary number	( SCGCQ01221523 port of SCGCQ01211733) 
 - PL: Long Firmware Wait During Tx Context Cleanup	( SCGCQ01232194port of SCGCQ01157345) 
 - Windows MR6.13 Alpha-eSDS Invader:-7 to -13% Perf Drops SR IO Sizes-4K,8K,16K QD(8	( SCGCQ01236372 port of SCGCQ01208167) 
 - Assertion failure in ../../dm/mpt2/mptrec.c at line 3139, while performing cable pull/push operation.	( SCGCQ01238553 port of SCGCQ01235505) 
 - IOP: Enable fault 0x2810	( SCGCQ01246726 port of SCGCQ01246717) 
 - Diagnostics report of iMR Invader contains information about R6 and R60 is set to 0	( SCGCQ01249579 port of SCGCQ01235661) 
 - Ventura: Firmware Hangs on Cold Boot of Slow Parts	( SCGCQ01251642 port of SCGCQ01250734) 
 - IOP: MCTP: Controller Fault 0x265D observed with running MCTP over PCIe VDM requests through controller reset( SCGCQ01254724 port of SCGCQ01250821) 
 - IOP: MCTP: Bus Master failed to discover MCTP EID during Ventura Port Enable	( SCGCQ01254725 port of SCGCQ01254021) 
 - SGPIO clock running at 100.7 KHz when set to 100Khz	( SCGCQ01260750 port of SCGCQ01234457 )
 - IOP: MCTP: MPI FW Download over MCTP PCI VDM	( SCGCQ01262853 port of SCGCQ01236956) 
 - IOP: MCTP: FW Download over MCTP PCIe VDM sometimes sees the checksum of the image fail	( SCGCQ01262870 port of SCGCQ01241620) 
 - NVMe backplane detection and device discovery fails on OEM specific server NVMe backplane	( SCGCQ01278820 port of SCGCQ01274101) 
 - PL : Add Support for PUIS(Power Up In Standby	( SCGCQ01280342 port of SCGCQ01174618) 
 - PL: BIOS Stuck when firmware is using 'Device Slot Number' for Bay number displaying	( SCGCQ01311448 port of SCGCQ01275770) 
 - PL : Enclosure LEDs won't blink if slot numbers are not sequential	( SCGCQ01313969 port of SCGCQ01291784) 
 - PL:Customer specific drive enumeration	( SCGCQ01315240 SCGCQ01198341) 
 - PL : Fault 0x7c71 hit when 24 drives connected to 3224 controller is powered up	( SCGCQ01318438 port of SCGCQ01309751) 
 - Ventura/Marlin: Continual Sequences of Adapter Reset followed by host boot when only the CBB is present causes the A15 to freeze	( SCGCQ01321823 port of SCGCQ01297690) 
 - Design changes update on NVME drive hotswap feature and updating more changes	( SCGCQ01327717 port of SCGCQ01319426) 
 - Ventura: AltData select, RefClk Mux not setup for SGPIO initiator prior to init	( SCGCQ01328966 port of SCGCQ01321764) 
 - pl: backend PCIe: specific vendor NVMe device does not appear to host software	( SCGCQ01337626 port of SCGCQ01328743) 
 - Ventura: Detect invalid BP_TYPE types in VPP backplane Mgmt connector group	( SCGCQ01342775 port of SCGCQ01332062) 
 - (NVMe Only	( SCGCQ01343513 port of SCGCQ01325987) 
 - (NVMe Only	( SCGCQ01343518 port of SCGCQ01325987) 
 - Ventura: Task Management to NVMe drives may not complete	( SCGCQ01345808 port of SCGCQ01330747) 
 - Ventura: NVDATA option to ignore BP_TYPE check and force enable PCIe RefClk for NVMe backplanes	( SCGCQ01349936 port of SCGCQ01349247) 
 - IOP: MCTP: Firmware stops freeing posted PCIe credit	( SCGCQ01353719 port of SCGCQ01345810) 
 - Ventura: PL FW may fault x720E for invalid backplane type configuration	( SCGCQ01357973 port of SCGCQ01351358) 
 - Ventura: PL FW may fault x720E for invalid backplane type configuration	( SCGCQ01357974 port of SCGCQ01351358) 
 - ExpressSDS: Add a new event MR_EVT_PD_INQUIRY_INFO to log device Inquiry info on discovery at SOD, or device insertion	( SCGCQ01368290 port of SCGCQ00880746) 
 - EXSDS : RAID 0 ,1 Config created in raid mode are not imported after personality switch when > 64 UG drives are connected .	( SCGCQ01368326 port of SCGCQ00906370) 
 - SDS:Adapter at Base Port not responding when background operations running reboot the system	( SCGCQ01368364 port of SCGCQ00926900) 
 - MR_Invader_eSDS_CISCO: Not able to create EPD using storcli.	( SCGCQ01368400 port of SCGCQ00944454) 
 - VD LEDs are not updated if SES Monitoring is disabled	( SCGCQ01368431 port of SCGCQ01004444) 
 - eSDS_1.1:Firmware crash@line 108 in file ../../raid/taskman.c when performing creation and deletion of EPD's	( SCGCQ01370440 port of SCGCQ01023898) 
 - ExpressSDS: Firmware crashes during hibernation	( SCGCQ01370487 port of SCGCQ01042005) 
 - Improve Error Reporting for SPI flash commands.	( SCGCQ01372977 port of SCGCQ01358446) 
 - SATA: Block device log pages does not free the Raw frames	( SCGCQ01373423 port of SCGCQ01373403) 
 - Found invalid event	( SCGCQ01375911 port of SCGCQ01347858) 
 - SSU Commands to SPL-2 compliant drive times out	( SCGCQ01376408 port of SCGCQ01358769) 
 - PL: RETURNED LOGICAL BLOCK ADDRESS in READ CAPACITY (16	( SCGCQ01377235 port of SCGCQ01366977) 
 - Chassis slot valid bit is not set into Enclosure Page 0.	( SCGCQ01380979 port of SCGCQ01323680) 
 - PL:Customer specific drive enumeration	( SCGCQ01380981 port of SCGCQ01198341) 
 - Chassis slot valid bit is not set into Enclosure Page 0.	( SCGCQ01380982 port of SCGCQ01323680) 
 - PL : Drives may not spin up due to bug in spin up path found during code walk through	( SCGCQ01385320 port of SCGCQ01358138) 
 - MR 7.3 :PL Fault 0000d075 LR 01283991 , while running IO`s , CC and OCR in background.	( SCGCQ01399528 port of SCGCQ01384714) 
 - Feature to retrieve the TTY logs compressed	( SCGCQ01400363 port of SCGCQ00772215) 
 - PL: IT Nexus Reset Option for Avoid Duplicate Mid Feature	( SCGCQ01401592 port of SCGCQ01362788) 
 - (SATA Only	( SCGCQ01409312 port of SCGCQ01406046) 
 - MR7.1: Shutdown command received from host" missed in tty log	( SCGCQ01410916 port of SCGCQ01389941) 
 - Restore nvram flag allowOnlineCtrlReset after set factory default completes	( SCGCQ01411041 port of SCGCQ01378753) 
 - Boot message string change for BOOT_MSG_CACHE_DISCARD	( SCGCQ01412801 port of SCGCQ01394348) 
 - Parameter Page Reads fail during ONFI bringup.	( SCGCQ01413784 port of SCGCQ01413557) 
 - Parameter Page Reads fail during ONFI bringup.	( SCGCQ01415127 port of  SCGCQ01413557) 
 - PL: Change nvdata bits for avoid duplicate mid feature to Mfg 17 Flags bits 12:11	( SCGCQ01421336 port of SCGCQ01414932) 
 - PL: Change avoid duplicate mid LUN reset option to abort task set	( SCGCQ01429867 port of SCGCQ01429655) 
 - Ventura VSES: Unique id and serial number for virtual SES to support microsoft storage spaces direct.	( SCGCQ01436959 port of SCGCQ01404241) 
 - Assertion failure in ../../raid/buffer.c for offline R6 Logical drives by Removing the drives while IO.	( SCGCQ01441338 port of SCGCQ01358905) 
 - Ventura vSES: SAS and SATA direct attached devices are not getting associated to vSES in Windows Storage Spaces Direct.	( SCGCQ01442629 port of SCGCQ01438119) 
 - Not able to add drives to existing R10 VD	( SCGCQ01446112 port of SCGCQ01240761) 
 - Bugzila 112779 - [PM863A SSD can not show the "Part Number"/ "FRU Number" information under Host tool web w	( SCGCQ01448010 port of SCGCQ01435624) 
 - BSt Ventura 7.5 Profile21==> Set Drive Offline Failed.	( SCGCQ01448671 port of SCGCQ01437184) 
 - Add support for Transport Ready in Ventura	( SCGCQ01454814 port of SCGCQ01387369) 
 - MCTP I2C: I2C communication is lost between BMC and controller	( SCGCQ01455876 port of SCGCQ01385782) 
 - PL : PWR_GRANT is not issued upon PWR_REQ from SPL2 drive	( SCGCQ01458074 port of SCGCQ01330984) 
 - PL: EnclMgmt: Move ownership of SES Page 0x0A slot mapping from devices to PHYs	( SCGCQ01458622 port of SCGCQ00870423) 
 - PL : PL fault 0x7C72 is hit during discovery when disabling and enabling all the PHYs connected to legacy SAS drives	( SCGCQ01458664 port of SCGCQ01455200) 
 - ONFI Device param page checksum calculation is not correct.	( SCGCQ01460622 port of SCGCQ01460478) 
 - NVMe drive discovery fails after pull/push on customer specific NVMe supported backplane	( SCGCQ01460735 port of SCGCQ01404209) 
 - Ventura B0: NVME Drives Not Discovered on 16i Card	( SCGCQ01461753 port of SCGCQ01381033) 
 -	( SCGCQ01462850 port of SCGCQ01459442) 
 - MR7.4 Alpha shows, MS- Jetstress 12% DB Read Performance Regression with Single Driver R0 ( 24VDs	( SCGCQ01463243 port of SCGCQ01448858) 
 - Hot plugged NVMe drive fails to link up on OEM backplanes with ISTWI drive presence polling enabled	( SCGCQ01464096 port of SCGCQ01463496) 
 - MR 7.4 - COL hit Assertion mon_task	( SCGCQ01464512port of SCGCQ01452209) 
 - MR7.4: LDs disappear when changing controller profile (from profile 10 back to profile 12	( SCGCQ01465007 port of SCGCQ01413560) 
 - Disable combined Reply mode for MSIx if MCTP is enabled	( SCGCQ01466073 port of SCGCQ01459283) 
 - Fast Path IO is not failed for LDBBM table entries	( SCGCQ01466376 port of SCGCQ01452385) 
 - Fixed the issue with older ibutton	( SCGCQ01466737 port of SCGCQ01455738) 
 -	( SCGCQ01466917 port of SCGCQ01346550) 
 - System will pop up “Cannot communicate with iButton to …” during reboot with customer iMR card (FW:50.2.1-0597	( SCGCQ01467155 port of SCGCQ01447988) 
 - Single Thread MSI-X and MCTP accesses	( SCGCQ01467163 port of SCGCQ01446273) 
 - Limit printing a SGL chain to only 15 elements.	( SCGCQ01468156 port of SCGCQ01180961) 
 - 8GB DDR support Changes for seamless downgrade/upgrade of MR FW pkgs	( SCGCQ01472902 port of SCGCQ01415141) 
 - Storclif Restart command fails with ERRCd 105	( SCGCQ01472919 port of SCGCQ01461663) 
 - I2C controller hang is observed with repeated LD create and delete script from BMC	( SCGCQ01473774 port of SCGCQ01378552) 
 - Max supported disk of Raid 50 and Raid 60 is showing 138	( SCGCQ01474118 port of SCGCQ01472877) 
 - OEM intruder: Error scrolls on debugger:C0:EnclSgpioHandleDevicePresenceCallback:should never happen logic/internal error.	( SCGCQ01474296 port of SCGCQ01235177) 
 - 930-16i Cannot Spinup HDD During System Power On	( SCGCQ01477277 port of SCGCQ01470741) 
 - PL: Add Code to Correctly Determine Mid for Rx Context Non-automated Interrupts	( SCGCQ01479502 port of SCGCQ01472512) 
 - Purley Server: CATERR reported on front panel LCD and SUT hang at the windows logo page	( SCGCQ01481033 port of SCGCQ01410221) 
 - Purley Server: CATERR reported on front panel LCD and SUT hang at the windows logo page	( SCGCQ01481034 port of SCGCQ01410221) 
 - MR RAID-mode profile 10 create vd cause pds for that vd offline	( SCGCQ01481312 port of SCGCQ01450092) 
 - 9460-8i card connect drive through direct-attached backplane: error LED not on when drop out a drive.	( SCGCQ01482233 port of SCGCQ01445040) 
 - Factory default restore required to set the controller properties after FW upgrade	( SCGCQ01483186 port of SCGCQ01479667) 
 - Target device LED issues on Talladega slot #25	( SCGCQ01483718 port of SCGCQ01394459) 
 - Change stot status for SGPIO rebuilding drive when drive becomes offline/failed.	( SCGCQ01484109 port of SCGCQ01208452) 
 - System will pop up “Cannot communicate with iButton to …” during reboot with OEM custom card	( SCGCQ01496768 port of SCGCQ01501209) 
 - Switching back and forth between profile 10 and 12 with data cable pull results in foreign config not importable	( SCGCQ01501951 port of SCGCQ01485045) 
 - IOP: 0x265D Fault Observed on Cold Boot of Customer Server with Misconfigured Controller NVDATA	( SCGCQ01505077 port of SCGCQ01473138) 
 - PL SATL: SCSI Write Buffer Mode 7 Command Incorrectly Failed by Firmware	( SCGCQ01505080 port of SCGCQ01498114) 
 - IOP: I2C MCTP: Slave response mode fails to return response to I2C read	( SCGCQ01508067 port of SCGCQ01506883 ) 
 - Controller hangs after warm reboot in presence of pinned cache	( SCGCQ01508156 port of SCGCQ01497790) 
 - Preserved Cache doesn't flush back during Foreign Import	( SCGCQ01510341 port of SCGCQ01466831) 
 - MR7.3.1 : controller reset seen while importing 32 VD foreign config	( SCGCQ01511969 port of SCGCQ01506874) 
 - Fault State (0x265d	( SCGCQ01514262 port of SCGCQ00856085) 
 - iMR-FW Drive Fault LED will light at some frequency when a JBOD drive is pulled out	( SCGCQ01516692 port of SCGCQ01481393) 
 - pl: backend PCIe: workaround timer may trigger after too short of an interval	( SCGCQ01519802 port of SCGCQ01518343) 
 - pl: NVMe: rapid device removal/add with a specific vendor backplane	( SCGCQ01522511 port of SCGCQ01487423) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2	( SCGCQ01523550 port of SCGCQ01523531) 
 - pl: backend PCIe: non-NVMe endpoint not cleaned up on removal	( SCGCQ01529383 port of SCGCQ01516968) 
 - PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB	( SCGCQ01529512 port of SCGCQ01509770) 
 - 7.6 NVDATA change for NVMeAbortTO in MrParamsPage0, and correct MrParamsPage0 XSD mapping.	( SCGCQ01533324 port of SCGCQ01531782) 
 - Sles12 SP3 OS is getting stuck during first boot	( SCGCQ01538948 port of SCGCQ01531741) 
 - PL Fault 0000ecdd LR 01403837 during initial discovery	( SCGCQ01539840 port of SCGCQ01531770) 
 - Initiate ocr when FW enters MonTask	( SCGCQ01540255 port of SCGCQ01381615) 
 - MR7.1/7.3 Termlog/UARTlog - messages sometimes missed in Termlog	( SCGCQ01540360 port of SCGCQ01498188) 
 - pl: backend PCIe: switch attached discovery takes too long	( SCGCQ01556426 port of SCGCQ01522343) 
 - memory leak issue resulting controller crash	( SCGCQ01561900 port of SCGCQ01539353) 
 - Jbod become Ugood sometimes after reboot	( SCGCQ01561914 port of SCGCQ01508978) 
 - Controller hung, when updating the drive firmware	( SCGCQ01562034 port of  SCGCQ01553266) 
 - Performance Improvements	( SCGCQ01562098 port of SCGCQ01455538) 
 - heck Consistency doesn't identify double media errors once aborting and starting CC again	( SCGCQ01567485 port of SCGCQ01411591) 
 - MR7.3.1_Assertion failure in ../../dma/dmaxor.c at line 1180:	( SCGCQ01574072 port of SCGCQ01482384) 
 - System hangs after performed Cryptographic Erase on SAS ISE drive	( SCGCQ01574395 port of SCGCQ01525119) 
 - pl: backend PCIe: 4311 fault (part 3	( SCGCQ01574924 port of SCGCQ01537791) 
 - MR 7.6 Assertion failure in ../../dm/src/dm.c at line 1540: 0" after pwr off the enclosure to generate pinned_cache	( SCGCQ01579752 port of SCGCQ01561611) 
 - Turn off GPIOA19 (global fault LED installed	( SCGCQ01581266 port of SCGCQ01566616) 
 - Fixing the issues during bringup of the universal backplane.	( SCGCQ01581911 port of SCGCQ01522148) 
 - To fix issues for back plane configuration validation and LED control for the UBM backplane.	( SCGCQ01582240 port of SCGCQ01533852) 
 - To fix the LED issue, VPP data and moving to change detect poll state	( SCGCQ01582246 port of SCGCQ01576165) 
 - Event with enclose 0x00 slot 0 during the system boot when a command is timed out (Command timeout on PD 12(e0x00/s0	( SCGCQ01582497 port of SCGCQ01520443) 
 - STP Passthru commands end up with blank FiS response buffer	( SCGCQ01582503 port of SCGCQ01576179) 
 - 9460-8i is reporting Chip Temperature of 255 when the ambient temp is about 0 C	( SCGCQ01582535 port of SCGCQ01565568) 
 - Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail	( SCGCQ01598554 port of SCGCQ01574224) 
 - Restrict FW update based on NVMe external clock oscillator support of current SBR and inbound SBR image (Talladega and Martinsville ONLY	( SCGCQ01599743 port of SCGCQ01593696) 
 - Enclosures is not exposed to Host even if exposeEnclosureToHost is set.	( SCGCQ01615762 port of SCGCQ01599832) 
 - To implement the CHANGE_DETECT GPIO feature for the UBM backplanes	( SCGCQ01628439 port of SCGCQ01507506) 
 - The PCIe reset to be handled properly for the Change detect feature	( SCGCQ01628451 port of SCGCQ01623437) 
 - PL: Change to Customer Specific SMP Response Report Manufacturer	( SCGCQ01641073 port of SCGCQ01505468) 
 - Not all NVMe drives were discovered after server cold or warm boot	( SCGCQ01686240 port of SCGCQ01664963) 
 - (SATA only	( SCGCQ01720496 port of SCGCQ01681441) 
 -	( SCGCQ00136970 port of SCGCQ00126592) 
 - IR Firmware: Data Corruption for virtual read seen while failing a resyncing RAID10 volume	( SCGCQ00138314 port of SCGCQ00135147) 
 - Fault 265D occurs when running IOs to volume which has 1 drive connected via cable breaker & 1 direct attached,to HBA.	( SCGCQ00150517 port of SCGCQ00147098) 
 - IR MP: Fault 8405 encountered if resyncing disks is removed.	( SCGCQ00150519 port of SCGCQ00140613) 
 - LSI2008 SATA NCQ enablement	( SCGCQ00153474 port of SCGCQ00142855) 
 - Bit 20 of RAID Volume Page 0 to comply with definition as in MPI 2 spec rev M or later	( SCGCQ00153681 port of SCGCQ00145313) 
 - IOP: First DNS lookup for a TFTP Server fails in Ethernet Firmware Download	( SCGCQ00153863 port of SCGCQ00147385) 
 - IOP: Xmodem commands hang when IOC is in Fault state	( SCGCQ00154747 port of SCGCQ00149111) 
 - IOP: Ethernet firmware download sometimes completes successfully, then faults	( SCGCQ00154866 port of SCGCQ00146094) 
 - Send Execute Device Diagnostic ATA command during SATA Initialization	( SCGCQ00155108 port of SCGCQ00148227) 
 - (IOP-Only	( SCGCQ00155283 port of SCGCQ00128289) 
 - MPI2: prepare 02.00.17 header files	( SCGCQ00156016 port of SCGCQ00150068) 
 - Eliminate PL Config Page restrictions	( SCGCQ00157819 port of SCGCQ00143162) 
 - CKE signal in Memory subsystem glitches when entering self refresh mode	( SCGCQ00159096 port of SCGCQ00153284) 
 - Utility: Update IO Unit page 1 reference in memcfg utility	( SCGCQ00160080 port of SCGCQ00153751) 
 - USB: Create a package build	( SCGCQ00160111 port of SCGCQ00151517) 
 - DMA sense data with FW instead of HW to prevent a hang of the DMA transfer.	( SCGCQ00160363 port of SCGCQ00155280) 
 - Setting the Min and Max value for the resources in Mfgpag9 to ffff leads to fwfault 0x0302	( SCGCQ00160405 port of SCGCQ00153253) 
 - Fault 5803 during discovery of large topology after adjusting Ph8 Alpha FW NVDATA on Liberator B4.	( SCGCQ00162377 port of SCGCQ00155755) 
 - (IOP	( SCGCQ00163614 port of SCGCQ00152500) 
 - USB: Enumeration somestime causes fault 0xD04	( SCGCQ00164452 port of SCGCQ00151004) 
 - Host and Library API names to contain 'i' to denote interfacing API.	( SCGCQ00164491 port of SCGCQ00155949) 
 - 265d fault is seen when volume member drives are removed & inserted simultaneously	( SCGCQ00165921 port of SCGCQ00154633) 
 - Trying to flash IR firmware image on a controller with no NVSRAM faults with 265D fault code	( SCGCQ00165922 port of SCGCQ00158423) 
 - Rescaning of large topology with 90 drives during make and break of wide port not handled properly by driver	( SCGCQ00165923 port of SCGCQ00146928) 
 - Hot Spare not getting pulled in after removing a member drive from IM volume	( SCGCQ00165924 port of SCGCQ00156138) 
 - With the failed RAID10 volume after removing two adjacent drives the BGI is still in progress	( SCGCQ00169770 port of SCGCQ00166640) 
 - IR: BGI stalls during when Raid1 volume drives are >2TB	( SCGCQ00172673 port of SCGCQ00169172) 
 - Gemini not correctly enabling the upper GPIOs	( SCGCQ00174442 port of SCGCQ00156991) 
 - IR: Tape drive reported as non-certified drive	( SCGCQ00174932 port of SCGCQ00166084) 
 - Comment out UART FIFO toggle	( SCGCQ00177378 port of SCGCQ00176249) 
 - Ringbuffer corrupted when exception data printed after a fault	( SCGCQ00177379 port of SCGCQ00175209) 
 - DDR3 Fails Training On Some Hardware	( SCGCQ00177382 port of SCGCQ00172188) 
 - (NVDUMP	( SCGCQ00177563 port of SCGCQ00162939) 
 - Format ringbuffer prints for I2C	( SCGCQ00178836 port of SCGCQ00175655) 
 - Disable/enable of the Fast Path Engine for a device was not working.	( SCGCQ00184821 port of SCGCQ00182860) 
 - RAID1 volume turns to failed state after swapping the primary & secondary drives with each other with hot spares present	( SCGCQ00186468 port of SCGCQ00170472) 
 - IR: Multiple simultaneous drive pulls can lead to an adapter reset	( SCGCQ00186470 port of SCGCQ00170872) 
 - Enhance Gen2 IR firmware to actually issue the START/STOP UNIT command to SATA SSD volume members	( SCGCQ00188492 port of SCGCQ00162019) 
 - Need generic IOP method to read and write from indirect window in our chips	( SCGCQ00188773 port of SCGCQ00125084) 
 - Event notification for NOTIFY(Enable Spinup	( SCGCQ00188779 port of SCGCQ00161993) 
 - XSD files update for MPI config page addition and man page changes.	( SCGCQ00190956 port of SCGCQ00179240) 
 - (SRIOV BLD	( SCGCQ00201445 port of SCGCQ00176720) 
 - (SRIOV-Only PL	( SCGCQ00201464 port of SCGCQ00176747) 
 - (SRIOV-Only	( SCGCQ00201728 port of SCGCQ00176741) 
 - (SRIOV	( SCGCQ00201837 port of SCGCQ00152257) 
 - (SRIOV IOC	( SCGCQ00202178 port of SCGCQ00176721) 
 - (SRIOV	( SCGCQ00202316 port of SCGCQ00152258) 
 - (SRIOV-Only PL	( SCGCQ00203026 port of SCGCQ00176746) 
 - DDR3: Read leveling delay issue on slow skew hardware	( SCGCQ00203649 port of SCGCQ00193395) 
 - Drive not shownup in linux after insertion to a hot slot to an incompatible volume	( SCGCQ00203887 port of SCGCQ00193963) 
 - iButton authorization requirment not enabled on SRIOV build by default	( SCGCQ00204102 port of SCGCQ00188480) 
 - Update to handle large out of range max host credit setting in manufacturing page 9.	( SCGCQ00204203 port of SCGCQ00186348) 
 - (IOP-Only	( SCGCQ00204304 port of SCGCQ00183882) 
 - UART CLI command to erase a region of IOC Flash ROM	( SCGCQ00206284 SCGCQ00173641) 
 - Hardware does not detect all errors in PCI received packets	( SCGCQ00209345 port of SCGCQ00198832) 
 - PL: Slot number in Device Page 0 may be incorrect	( SCGCQ00218355 port of SCGCQ00193383) 
 - change batch file to modify permissions of zip file so web build / release gets updated zip file	( SCGCQ00225823 port of SCGCQ00225815) 
 - (IOP-Only	( SCGCQ00226692 port of SCGCQ00204180) 
 - IR: Resync operation for RAID10 volume stalls when 13% complete	( SCGCQ00235599 port of SCGCQ00192089) 
 - Child: Add PI to IR: Metadata changes	( SCGCQ00235602 port of SCGCQ00204629) 
 - PI Enable flag on manufacturing page 10 is ignored on activation	( SCGCQ00235655 port of SCGCQ00216422) 
 - RAID Volume degraded after roaming	( SCGCQ00235659 port of SCGCQ00218013) 
 - Child: Add PI to IR: RAID Passthrough Messages	( SCGCQ00237154 port of SCGCQ00194035) 
 - Child: Add PI to IR: Error Logging	( SCGCQ00237166 port of SCGCQ00204612) 
 - Set firmware to fault at boot loader if IR is enabled and NVSRAM is missing	( SCGCQ00237344 port of SCGCQ00173439) 
 - The SATL's inquiry VPD page 0 doesn't show support for block limits and logical block provisioning pages.	( SCGCQ00237489 port of SCGCQ00226980) 
 - Child: Add PI to IR: BGI Changes - Initialize PI Info	( SCGCQ00237709 port of SCGCQ00194014) 
 - Logical block reference tag errors on host IOs	( SCGCQ00237896 port of SCGCQ00223337) 
 - Improve the performance of adaptive heuristic queue depth algorithm.	( SCGCQ00238404 port of SCGCQ00226755) 
 - Mixing of PI type 2 formatted drives and non-PI drives results in error creating RAID volume	( SCGCQ00243894 port of SCGCQ00240457) 
 - BIOS CU might display dual path during RAID creation on a OEM specific config	( SCGCQ00246965 port of SCGCQ00218145) 
 - Disabling PHY's through SAS IO Unit Page 1 might stop Heartbeat LED blinking	( SCGCQ00249386 port of SCGCQ00221519) 
 - (IOP-Only	( SCGCQ00254515 port of SCGCQ00202274) 
 - Custom HARD RESET behavior in Target Mode firmware	( SCGCQ00255664 port of SCGCQ00198846) 
 - Add UART command to write host/system/PCI memory	( SCGCQ00257564 port of SCGCQ00227930) 
 - SATL: Configurable Write Same execution behavior	( SCGCQ00260442 port of SCGCQ00245759) 
 - Tbolt: Port width modulation changes	( SCGCQ00261551 port of SCGCQ00165936) 
 - LWIP (Ethernet library	( SCGCQ00270264 port of SCGCQ00269923) 
 - Fault 0x2651 on a Message Unit Reset (MUR	( SCGCQ00279907 port of SCGCQ00245940) 
 - Host IO uses PI on volume where BGI is pending	( SCGCQ00280128 port of SCGCQ00243939) 
 - Fix formatting of iopMsgHandlerPortEnable(	( SCGCQ00280172 port of SCGCQ00242056) 
 - RAID1 Volume fails to start resync when a hot plugged hot spare is available	( SCGCQ00293807 port of SCGCQ00229135) 
 - Raid Accelerator IOs hang with injected Guard Errors or when running Multi-threaded IOs	( SCGCQ00294585 port of SCGCQ00279629) 
 - Always flush secondary column write cache during resync regardless of whether volume write cache is enabled or not.	( SCGCQ00305738 port of SCGCQ00277798) 
 - 32MB flash chips support	( SCGCQ00307946 port of SCGCQ00229730) 
 - (DDR3	( SCGCQ00314699 port of SCGCQ00250014) 
 - Example NVDATA files to enable support for operation at 1333MT/s and other supported speeds for SAS2208 devices	( SCGCQ00314702 port of SCGCQ00234416) 
 - SAS2308 doesn't support DPO or FUA	( SCGCQ00320040 port of SCGCQ00254531) 
 - BIOS Page 1 default for BIOSOptions and UEFIVersion need updated	( SCGCQ00320044 port of SCGCQ00258821) 
 - SAS2 FW:Ph14:Spelling Mistakes in UART Iop erflsh command help	( SCGCQ00320049 port of SCGCQ00280467) 
 - DDR3: False positive fault while finding read latency.	( SCGCQ00335417 port of SCGCQ00194835) 
 - (DDR3	( SCGCQ00385281 port of SCGCQ00225383) 
 - MPI2 Toolbox - Memory Move Tool - does not transfer data as expected	( SCGCQ00440476 port of SCGCQ00210057) 
 - PL: Event Replay device reordering	( SCGCQ00469721 port of SCGCQ00313918) 
 - Controller firmware could not decode the correct reference clock speed other than 150 MHz	( SCGCQ00469801 port of SCGCQ00343999) 
 - Enhanced PLI Control Request Interface	( SCGCQ00471944 port of SCGCQ00354301) 
 - (IOP	( SCGCQ00471990 port of SCGCQ00384769) 
 - PCI information contains wrong device ID for Fury(3008	( SCGCQ00472414 port of SCGCQ00356996) 
 - (IOP	( SCGCQ00472494 port of SCGCQ00391442) 
 - ISTWI support to handle zero length transfer read and write requests	( SCGCQ00472602 port of SCGCQ00301262) 
 - Ensure debug information tools work during fault	( SCGCQ00472607 port of SCGCQ00339781) 
 - (IOP	( SCGCQ00472610 port of SCGCQ00267257) 
 - ONFI: Add new diag commands	( SCGCQ00473932 port of SCGCQ00349860) 
 - Added faults in the cable management code	( SCGCQ00473937 port of SCGCQ00365524) 
 - IOP:MSI/ MSIx error interrupt is not handled	( SCGCQ00474084 port of SCGCQ00378041) 
 - (IOP	( SCGCQ00475369 port of SCGCQ00377971) 
 - DDR: IOP: Code copy causes a TLB error interrupt	( SCGCQ00475371 port of SCGCQ00375411) 
 - IOP: Fault 0x1500 encountered when using Invader C0 on some systems using MSIx	( SCGCQ00476786 port of SCGCQ00374927) 
 - Serdes temperature sensitivity may cause phy errors	( SCGCQ00476793 port of SCGCQ00384936) 
 - Prevent access to PCIe core PLB registers until clock is stable	( SCGCQ00476821 port of SCGCQ00364546) 
 - Create SAS3 XML bindings file for NVDATA Cloud App	( SCGCQ00477174 port of SCGCQ00379940) 
 - Firmware faults with 0x2622 due to a parity error in pad (unused	( SCGCQ00477177 port of SCGCQ00332124) 
 - Extend FLASH Erase Timeout for Future chips	( SCGCQ00504709 port of SCGCQ00504060) 
 - Invader C0: Minor Target mode optimzations	( SCGCQ00551042 port of SCGCQ00411657) 
 - (IOP	( SCGCQ00552450 port of SCGCQ00383875) 
 - IOP: Reply queue hardware not reset on IOC Init after message unit reset	( SCGCQ00552457 port of SCGCQ00384570) 
 - BST : 265D fault while flashing the IT/IR images over Falcon and Liberator and Meteor IT.	( SCGCQ00553447 port of SCGCQ00298671) 
 - make internal temperature sensor data available at start-of-day	( SCGCQ00559404 port of SCGCQ00419450) 
 - Set DPC bit in CCR1 inside GHS flash scripts	( SCGCQ00559717 port of SCGCQ00403127) 
 - IOP: 0x2628 faults from Gen HS FIFO 1	( SCGCQ00563314 port of SCGCQ00426490) 
 - IOP: SRIOV passes error when modifying visibility for DevHandles greater than 30	( SCGCQ00563456 port of SCGCQ00439499) 
 - Definition of SAS Clock Override field was incorrect	( SCGCQ00563901 port of SCGCQ00399250) 
 - IOP: Asynchronous reset may cause system reset and PCIe link down	( SCGCQ00564387 port of SCGCQ00421011) 
 - IOP: Value of PCIe SERDES parameter causes less than optimal receiver margin	( SCGCQ00565464 port of SCGCQ00400449) 
 - IOP: MCTP Event Handling	( SCGCQ00565513 port of SCGCQ00400534) 
 - IOP: Events not received by the host	( SCGCQ00566087 port of SCGCQ00403436) 
 - In iopDiagCmdPerfMonPlbAdd the string plbadd needs to be changed to addl2 to better describe the cli command	( SCGCQ00566125 port of SCGCQ00457390) 
 - HW Issue Needs Workaround - PCIe Link Equalization Request Bit in Link Status 2 Reg Not Cleared After Writing 1	( SCGCQ00566144 port of SCGCQ00461420) 
 - IOP: RAID Accelerator may not set up snooping registers correctly	( SCGCQ00566147 port of SCGCQ00461790) 
 - Standard Inquiry Data - Change Version Descriptor 2 to SAT-3	( SCGCQ00566190 port of SCGCQ00521576) 
 - IOP: Enable MCTP support in IT/IR firmware.	( SCGCQ00566207 port of SCGCQ00396012) 
 - IOP: Add System Management configuration page	( SCGCQ00566211 port of SCGCQ00404227) 
 - PL: Update Host Based Discovery to include DataBolt settings	( SCGCQ00566213 port of SCGCQ00414622) 
 - IOP: MCTP: Add Slave-response-mode operation support	( SCGCQ00566226 port of SCGCQ00450123) 
 - Check if Power On Sense option is valid at SOD	( SCGCQ00566232 port of SCGCQ00472368) 
 - Build process improvements	( SCGCQ00566244 port of SCGCQ00477137) 
 - mpi_temp.h cleanup	( SCGCQ00568424 port of SCGCQ00503059) 
 - Turn on Allow Table-to-Table Links bit in SAS IO Unit Page 1 in default NVDATA.	( SCGCQ00568467 port of SCGCQ00339375) 
 - Configurable SES Page Buffer Size	( SCGCQ00568488 ) 
 - SAS2 IT - Phase 17 – WRITE LONG(16	( SCGCQ00568499 ) 
 - SCSIStatusQualifier is added to SCSI IO Error Reply	( SCGCQ00568504 port of SCGCQ00397520) 
 - IOP: MCTP: Response to MR Cmd returns MR Cmd PayloadID, return SCS Cmd PayloadID	( SCGCQ00568510 port of SCGCQ00565690) 
 - Fury no longer links up to Maxim expander with phase 2 FW	( SCGCQ00596630 port of SCGCQ00525026) 
 - Resolve the build errors for the Phase4.0 Pre-Alpha release	( SCGCQ00596631 port of SCGCQ00567486) 
 - GenCRC utility incorrectly calculates the image size internally	( SCGCQ00692023 port of SCGCQ00564201) 
 - IOP: MSIX Index in MID Descriptor not always set appropriately	( SCGCQ00725179 port of SCGCQ00580302) 
 - Pli Control Request for IOP to Bypass FP disable on Selected Device Handle in Target Mode Based PL upon receipt of for non good response frame	( SCGCQ00725182 port of SCGCQ00568651) 
 - SAS3 SCS IT/IR firmware fails to hostboot	( SCGCQ00725188 port of SCGCQ00695527) 
 - Remove event replay macro from mpi_temp.h file	( SCGCQ00725196 port of SCGCQ00574398) 
 - SAS phy page 3 write current action does not take effect immediately	( SCGCQ00725250 port of SCGCQ00602005) 
 - IOP: PowerPC ITLB Miss Errata with Pre-fetch using start of TLB padding	( SCGCQ00725262 port of SCGCQ00672307) 
 - Add ability to control ContinueAWT	( SCGCQ00725279 port of SCGCQ00530872) 
 - Remove unnecessary #if and duplicate function prototype	( SCGCQ00725303 port of SCGCQ00644368) 
 - SATL: Indicate support for the ATA Device Server Password security protocol	( SCGCQ00725310 port of SCGCQ00465302) 
 - IOP: MCTP: MCTP Control Discovery Notify over PCIe may be transmitted before host enables PCIe messages	( SCGCQ00725329 port of SCGCQ00663155) 
 - SCSI Command is Not Failed with Expected Response When Reserved Fields Set as Non-Zero Value for SATA Disk Under Format	( SCGCQ00725333 port of SCGCQ00679566) 
 - Support for Power Management States still advertised in PCIe DPA Configuration Regsiter when FW does not support	( SCGCQ00725340 port of SCGCQ00681116) 
 - IOP: PCIe DPA Status Configuration Register does not default to zero after a link down	( SCGCQ00725350 port of SCGCQ00663176) 
 - IOP: One path to freeing recevied generic PCIe messages is optimized out	( SCGCQ00725368 port of SCGCQ00660285) 
 - IOP: SR-IOV: Config page access denied from VFs	( SCGCQ00725373 ) 
 - IOP MCTP: Add basic MCTP Control Commands	( SCGCQ00725379 ) 
 - IOP MCTP: MPI Event registration, Extended Events command, and transmitting event datagrams	( SCGCQ00725380 port of SCGCQ00620227) 
 - IOP MCTPMsg: Add MPI RAID Action and RAID SCSI IO Passthrough	( SCGCQ00725385 port of SCGCQ00620222) 
 - Temperature Monitoring with bi-colored LED and over temp faulting.	( SCGCQ00725386 port of SCGCQ00577387) 
 - (DDR3	( SCGCQ00733051 ) 
 - Add support for zero length FLASH layout regions	( SCGCQ00764176 ) 
 - Add axTLS license file	( SCGCQ00781301 ) 
 - IOP: SR-IOV: Phy Changed events improperly filtered from SAS Topology Change List Event	( SCGCQ00781310 port of SCGCQ00683190) 
 - SRIOV IT: SAS Topology Change List Event data has entries for devices which are not mapped to the VFs	( SCGCQ00781329 port of SCGCQ00706800) 
 - IOP: SR-IOV: VF access to BIOS pages unexpectedly restricted	( SCGCQ00781342 port of SCGCQ00713442) 
 - IOP: Firmware download of complete flash could access invalid array index	( SCGCQ00781356 port of SCGCQ00728155) 
 - IOP: Memory move operation could access uninitialized variables	( SCGCQ00781357 port of SCGCQ00728677) 
 - IOP: Performance monitor CLI command could cause invalid array access	( SCGCQ00781365 port of SCGCQ00729619) 
 - IOP SRIOV: During controller boot-up, make PortEnable replies to VFs wait until PF is ready	( SCGCQ00781386 port of SCGCQ00689555) 
 - IOP: MCTP: Register for events to filter without asynchronous event datagram	( SCGCQ00781390 port of SCGCQ00699048) 
 - PL: Enclosure management code doesn't check return value	( SCGCQ00793928 port of SCGCQ00749722) 
 - IOP: Allow Fault Indication Function Code to override other GPIOs	( SCGCQ00793948 port of SCGCQ00741953) 
 - IOP: MCTP: Send busy retry status for response retransmission when no response is available	( SCGCQ00793951 port of SCGCQ00760431) 
 - Intruder: (IOP	( SCGCQ00801682 port of SCGCQ00707767) 
 - IOP: MCTP function only returns failure	( SCGCQ00816412 port of SCGCQ00787481) 
 - IOP: Poor coding style hides variable	( SCGCQ00816418 port of SCGCQ00787474) 
 - Fix compilation options	( SCGCQ00816426 port of SCGCQ00788656) 
 - DDR: Eliminate requirement in layout checklist to have clk be 1 inch longer than DQS	( SCGCQ00831257 port of SCGCQ00800434) 
 - Fixed the occurance of fault 0x1708, when a free MID is attempted to be failed to the host.	( SCGCQ00848143 port of SCGCQ00810649) 
 - IOP/IR: MCTP: After Volume Creation, no other commands can be executed	( SCGCQ00848197 port of SCGCQ00848197) 
 - IOP: MCTPMsg: Async events not always held back when not enabled	( SCGCQ00848202 port of SCGCQ00848202) 
 - Updated Comments in Fault and LogInfo Files	( SCGCQ00851631 port of SCGCQ00824577) 
 - SBL Bus not supported for I2C slave operations	( SCGCQ00851641 port of SCGCQ00810020) 
 - No boundary on I2C slave operations	( SCGCQ00851642 port of SCGCQ00810110) 
 - Initialization with BMC using I2C and slave response mode failed after moving from Phase 4 to Phase 6	( SCGCQ00855346 port of SCGCQ00831952) 
 - IOP: MCTP: Reinitalizing SLIR3-MCTP many times causes CmdStatus Busy to always be sent back in response	( SCGCQ00873958 port of SCGCQ00864752) 
 - IOP: Add code to stop additional hardware upon adapter reset	( SCGCQ00890618 port of SCGCQ00883655) 
 - (IOP	( SCGCQ00894197 port of SCGCQ00874061) 
 - NVDATA: Modify Manufacturing Page 30 Default NVDATA	( SCGCQ00927357 port of SCGCQ00925761) 
 - NVDATA: Fix overtemp LED for channel cards	( SCGCQ01004877 port of SCGCQ00924428) 
 - IOP: Fast Path SATA IO disappears and causes timeout and 6001 fault	( SCGCQ01004888 port of SCGCQ00943874) 
 - Intruder: Change "A0" to "A1" in comments of channel NVDATA files	( SCGCQ01004906 port of SCGCQ00889812) 
 - PL: I/O timeout while running both auto and non-auto I/Os.	( SCGCQ01025036 port of SCGCQ01022368) 
 - CFGI: CFGI Library to expose the variable gCfgiFlashAvailable that needs to be set by IOP	( SCGCQ01058158 ) 
 - Config write request validation adjusted to page header size as the minimum request length	( SCGCQ01197348 ) 
 - MRFW : OCR disabled while fw downgrade from 6.12 to 6.4	( SCGCQ01198953 port of SCGCQ01117827) 
 - IOP: MCTP: In I2C slave response mode low level errors can have two responses	( SCGCQ01203063 port of SCGCQ01189751) 
 - IOP: MPI FW Upload processing time enhancement	( SCGCQ01249413 port of SCGCQ01244472) 
 - 9400-8i and 9400-16i HBAs blinks incorrect slot LED when Locating drive slot	( SCGCQ01256692 port of SCGCQ01256391) 
 - IOP: MCTP: Controller aborted and failed MCTP discovery after several server DC power cycles	( SCGCQ01262784 port of SCGCQ01252343) 
 - IOP: MCTP: Miscellaneous defects exposed by MPI FW Download over MCTP PCIe VDM	( SCGCQ01262885 port of SCGCQ01237010) 
 - IOP WA:PCIe Config trap on Adv Error Capability and Control Register(Offset 0x118	( SCGCQ01278490 port of SCGCQ01271703) 
 - Disable PUIS(Power up in standby	( SCGCQ01305332 port of SCGCQ01304887) 
 - Chassis slot valid bit is not set into Enclosure Page 0.	( SCGCQ01326055 port of SCGCQ01323680) 
 - CSET: Update 9400 series Channel HBAs Drv Strength - (SCGCQ01321017	( SCGCQ01326640 ) 
 - PD Lost observed, after system graceful reboot or Controller OCR	( SCGCQ01327295 port of SCGCQ01314168) 
 - Marlin B0: backend PCIe: EC6D fault on link glitch	( SCGCQ01337660 port of SCGCQ01336021) 
 - Ventura: PL FW may Fault x61A5 during cable pull to an external enclosures with IOs outstanding	( SCGCQ01342226 port of SCGCQ01334254) 
 - Fixed SAS cleanup code to skip the PCI device instances.	( SCGCQ01342335 port of SCGCQ01332893) 
 - SATA Only : 48bit ATA pass through command with lower nibble of LBA(47:40	( SCGCQ01346820 port of SCGCQ01339000) 
 - ISA: Adding FW support for EPD creation through CfgDcmdAdd	( SCGCQ01368242 port of SCGCQ00831836) 
 - USA: Add a debug functionality to log all non-IO commands for a single EPD or multiple EPDs through debug( SCGCQ01368261 port of SCGCQ00856330) 
 - ExpressSDS: Populate the isEPD flag in MR_PD_INFO	( SCGCQ01368288 port of SCGCQ00879185) 
 - SDS:MonTask: line 2285 in file ../../dm/mpt2/mptrec.c	( SCGCQ01368310 port of SCGCQ00889634) 
 - FW not initiating copy back/rebuild after 24 Hour IO while monitoring the drive performance of the configured drives.	( SCGCQ01368320 port of SCGCQ00899866) 
 - Need to post the SystemResetRequired event when OCR happens and there is a personality switch is pending	( SCGCQ01368324 port of SCGCQ00902742) 
 - SDS:Ctrl _R allows to start copyback and it leads to loss EPDs	( SCGCQ01368351 port of SCGCQ00915715) 
 - ExpressSDS: Track the devices through "doNotAutoConfigureAsEPD" when the EPD or VD is deleted	( SCGCQ01368362 port of SCGCQ00925510) 
 - ExpressSDS: Physical drive pass-through SCSI commands are incorrectly tagged during task management	( SCGCQ01368383 port of SCGCQ00938273) 
 - Printing of serial number during the degraded media event	( SCGCQ01368384 port of SCGCQ00938286) 
 - SDS: Kill adapter observed while changing drive state from BAD to GOOD	( SCGCQ01368404 port of SCGCQ00945322) 
 - eSDS1.1:wrong message is displayed while in EPD mode when there no VD's present	( SCGCQ01370529 port of SCGCQ01064584) 
 - CSET: ISA: Disable SBBM for EPDs - (SCGCQ00837450	( SCGCQ01372358 ) 
 - Ventura: Slot LED status update operation may fail on 8i based HBAs	( SCGCQ01373072port of SCGCQ01372983) 
 - Ventura IOP: Firmware becomes unresponsive if host performs I2C transactions	( SCGCQ01388680 port of SCGCQ01379847) 
 - pl: backend PCIe: EC79 fault	( SCGCQ01389704 ) 
 - PL: Sending nonstop ATA Passthrough followed by unsupported SCSI commands rapidly to SATA device can cause a Call Stack Overflow	( SCGCQ01390853 port of SCGCQ01314465) 
 - Making MCTP interrupt context code FIQ safe.	( SCGCQ01391426 ) 
 - Virtual SES is not seen in Windows systems.	( SCGCQ01397678 ) 
 - Defect fix - Hang issue due to - mprintf in ISR and disable TtyLogToFlash, ses Bad phy rery count set to 5	( SCGCQ01399103 port of SCGCQ01377935) 
 - If an INVALID applicationMsgTag id received, then failed the command with MFI_OOB_STATUS_INVALID_CMD using command id MAX_OOB_COMMANDS.	( SCGCQ01399818 port of SCGCQ01337332) 
 - Ventura IOP: Implement workaround for device attached to PCIe front end	( SCGCQ01403449 port of SCGCQ01397501) 
 - Interrupting Offload will Lead to Next offload cycle to fail	( SCGCQ01404399 port of SCGCQ01399701) 
 - Exception Handler Return address 0x01362c7d when boot up	( SCGCQ01405520 port of SCGCQ01404373) 
 - PL Discovery: After Port Down, Expander Is Not Removed and Firmware Retries SMP Indefinitely	( SCGCQ01411982 port of SCGCQ01295414 ) 
 - MCTP I2C: I2C traces shows partial response/zero’ed out packet response from the HBA	( SCGCQ01421231 port of SCGCQ01394463) 
 - Added NVME passthrough support for MR stack	( SCGCQ01422211 port of SCGCQ01391416 ) 
 - Event shown incorrectly if supercap missing	( SCGCQ01431068 port of SCGCQ01425227) 
 - MR 7.4 - Hitting DC after OCR on 240 EPDs	( SCGCQ01439279 port of SCGCQ01412665) 
 - 9460-16i disappears from F1 setup after encrypting SED	( SCGCQ01450194 port of SCGCQ01326871) 
 - MR 7.4 - Hitting DC after OCR on 240 EPDs	( SCGCQ01454603 port of SCGCQ01412665) 
 - Disable user option to modify Multi Init/ SES Management/multiPath feature.	( SCGCQ01455679 port of SCGCQ01441181) 
 - Uncorrectable Medium / DIF Errors are not being handled correctly with pi enabled VDs.	( SCGCQ01459785 port of SCGCQ01447250) 
 - "phy 8 disabled" in tty log - After time sync and after VD creation	( SCGCQ01459789 port of SCGCQ01452263) 
 - Fatal FW Error during CopyBack and partial VD creations on a spanned VD.	( SCGCQ01459793 port of SCGCQ01453168) 
 - Ventura: FW may fault with 265D when attached to OEM NVMe backplane	( SCGCQ01461873 port of SCGCQ01385700) 
 - (VSES	( SCGCQ01463865 port of SCGCQ01458388) 
 - IO Stress Automation test failed while trying to delete VDs; OCR seen in TTY	( SCGCQ01466377 port of SCGCQ01454667) 
 - Flashed based 256 byte VPD programming support	( SCGCQ01466941 port of SCGCQ01330751) 
 - 9460-16i disappears from F1 setup after encrypting SED	( SCGCQ01466955 port of SCGCQ01326871) 
 - Flashed based 256 byte VPD programming support	( SCGCQ01474040 port of SCGCQ01330751) 
 - Inserting enclosures results in unconfigured good PDs changing to R0 automatically and should not	( SCGCQ01474091 port of SCGCQ01462655) 
 - Assertion failure in ../../raid/cache.c found while running multipath push/pull with IO'	( SCGCQ01474449 port of SCGCQ01466815) 
 - 930-16i Cannot Spinup HDD During System Power On	( SCGCQ01478865 port of SCGCQ01470741) 
 - Bugzila 112779 - [PM863A SSD can not show the "Part Number"/ "FRU Number" information under Host tool web w	( SCGCQ01481032 port of SCGCQ01435624) 
 - Server (Purley	( SCGCQ01481100 port of SCGCQ01250426) 
 - Fixed the issue with older ibutton	( SCGCQ01482228 port of SCGCQ01455738) 
 - Additional changes needed for SCGCQ01470741: 930-16i Cannot Spinup HDD During System Power On.	( SCGCQ01482898 port of SCGCQ01482688) 
 - Make NVRAM changes to support Transport Ready	( SCGCQ01484501 port of SCGCQ01464212) 
 - Ventura B0: Fault 0x510B while doing reboot test along with IOs & TMs	( SCGCQ01487266 port of SCGCQ01440764) 
 - [17B] Bugzila 120384 - [MFG] Purley Cosmo Raid card 530-8i loss during MQT1&2 Test	( SCGCQ01511223 port of SCGCQ01504243) 
 - [17B] Bugzila 120384 - [MFG] Purley Cosmo Raid card 530-8i loss during MQT1&2 Test	( SCGCQ01511224 port of SCGCQ01504243) 
 - PL owned mids are not getting released even after removing drives (SATA	( SCGCQ01512617 port of SCGCQ00846818) 
 - Ventura hardware does not like the IOP enable method used here.	( SCGCQ01519729 port of SCGCQ01514880) 
 - storcli show phyerror will return error in some test in some scenario	( SCGCQ01520063 port of SCGCQ01507899) 
 - MR FW is setting GPIO_SET_BBU_ENABLE(GPIOA8	( SCGCQ01521377 port of SCGCQ01519558) 
 - (SATA Only	( SCGCQ01524353 port of SCGCQ01516277) 
 - MegaRAID BIOS didnot timeout and cause Server boot hung when Controller Boot Fail because of bad SPD	( SCGCQ01524448 port of SCGCQ01447768) 
 - MR7.3.1 : iMR FW locks up and PSOD seen while trying to flash MR7.2.1 FW ROP	( SCGCQ01526202 port of SCGCQ01516986) 
 - Controller is not detecting in the storelib, after changing the mode from "set mode oob" command	( SCGCQ01530310 port of SCGCQ01494018) 
 - OEM Tool failure on OEM controller while I/O is running in background	( SCGCQ01530478 port of SCGCQ01525935) 
 - pl: NVMe: EC0D fault	( SCGCQ01533267 port of SCGCQ01530402) 
 - Systerm hang up with 0x73 code when entering S4 with 9440-8i+SAS RAID1 under RHEL7.3 GA	( SCGCQ01538776 port of SCGCQ01396610) 
 - pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment	( SCGCQ01556893 port of SCGCQ01540226) 
 - storcli shows 8ports controller as 9 ports	( SCGCQ01561912 port of SCGCQ01478353) 
 - Fault LED behavior is not consistent between PD direct attached vs connected via expander	( SCGCQ01577461 port of SCGCQ01508065) 
 - To fix the phy to slot mapping issue for the UBM backplane	( SCGCQ01582244 port of SCGCQ01542497) 
 - CC doesn't start on special built OEM firmware	( SCGCQ01582532 port of SCGCQ01559661) 
 - (SATA Only	( SCGCQ01593192 port of SCGCQ01539572) 
 - Add logging messages in addition to previous fixes of a related issue, as requested by the Customer.	( SCGCQ01602617 port of SCGCQ01584278) 
 - Device block and unblock messages observed for the existing connected NVMe drives when new NVMe drive is inserted	( SCGCQ01628423 port of SCGCQ01615532) 
 - The change detect feature macro missing, leading to compilation issue	( SCGCQ01628445 port of SCGCQ01616460) 
 - Not all NVMe drives discovered as part of hot plug operation	( SCGCQ01713380 port of SCGCQ01697329) 
 - Relaxed ordering Enhancement	( SCGCQ00136149 port of SCGCQ00131448) 
 - IR: Write cache not set correctly when fast resync is turned off due to a path pull on a multipath volume	( SCGCQ00136968 port of SCGCQ00127534) 
 - Fast resync is not turned back on a new resync once it has been turned off.	( SCGCQ00138308 port of SCGCQ00135763) 
 - IR: Physical disk used as a replacement device is uncorrectly unhidden to the host	( SCGCQ00138309 port of SCGCQ00126563) 
 - Data corruption seen while inserting the drive on a degraded volume during port reset.	( SCGCQ00138312 port of SCGCQ00135108) 
 - "Pause When Boot Alert Displayed" Intermittently Switching State	( SCGCQ00141733 port of SCGCQ00141052) 
 - IOP: Fixed Ethernet Bios Download	( SCGCQ00154513 port of SCGCQ00141825) 
 - Ethernet FWDL Code Review Modifications	( SCGCQ00154726 port of SCGCQ00150083) 
 - Allocate ISTWI device types and GPIO function codes for vendor specific use	( SCGCQ00155105 port of SCGCQ00151361) 
 - Thunderbolt B0 SBR not working.	( SCGCQ00156211 ) 
 - 9200-16e Target Port stops accepting I/Os after a certain number of I/Os on Phase 6 firmware	( SCGCQ00156441 port of SCGCQ00148044) 
 - Running MSC commands prior to running MSC init causes 265D fault	( SCGCQ00157578 port of SCGCQ00149262) 
 - During USB enumeration process the controller faults with Fault 0D04	( SCGCQ00157679 port of SCGCQ00147899) 
 - Ethernet FWDL: Firmware download from a TFTP Server occasionally fails.	( SCGCQ00160484 port of SCGCQ00151758) 
 - PCIe link width change returns 300a0007 loginfo even when request is honored exactly	( SCGCQ00160508 port of SCGCQ00153294) 
 - CLI Command Processing when firmware is hung in infinite loop	( SCGCQ00169003 port of SCGCQ00135538) 
 - (Thunderbolt	( SCGCQ00169006 ) 
 - (IOP-Only	( SCGCQ00169149 ) 
 - Virtualization: Fault 7D70 with port virtualization enabled firmware.	( SCGCQ00172536 port of SCGCQ00149660) 
 - IR: Hot plug/pull of large capacity configured drives fails	( SCGCQ00172675 port of SCGCQ00168900) 
 - use MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT, remove MPI2_RAIDVOL0_STATUS_FLAG from mpi_temp.h	( SCGCQ00172678 port of SCGCQ00168536) 
 - (IOP-Only	( SCGCQ00178838 ) 
 - _delay member is too small to hold all reasonable delay lengths for data scrub duration.	( SCGCQ00184817 port of SCGCQ00181619) 
 - Similar to SCGCQ00162017, enhance Gen2 IR firmware to keep tabs on which IR RAID volumes contain SSD physical disks	( SCGCQ00188490 port of SCGCQ00162018) 
 - 8111h fault occurs while activating a foreign volume on an adapter which already has failed volume with all the physical disks missing	( SCGCQ00188497 ) 
 - Thunderbolt: Update several I2C register fieldwidths for Thunderbolt I2C 80 byte FIFO per new I2C spec	( SCGCQ00188776 port of SCGCQ00172272) 
 - MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET is set in Protocol Flags of IOC Facts Reply	( SCGCQ00192702 port of SCGCQ00184400) 
 - (SRIOV-Only	( SCGCQ00201909 port of SCGCQ00182572) 
 - (SRIOV	( SCGCQ00202280 port of SCGCQ00152255) 
 - (SRIOV IOC	( SCGCQ00202338 port of SCGCQ00176722) 
 - Fix Global Variables in iButton code to match coding standard( SCGCQ00204066 port of SCGCQ00183854) 
 - (IOP-Only	( SCGCQ00204072 port of SCGCQ00152253) 
 - (BUILD	( SCGCQ00204225 port of SCGCQ00179033) 
 - When HDDs are removed from RAID10, the other drives go down and come back up.	( SCGCQ00222300 port of SCGCQ00202499) 
 - Non-PI volume becomes PI at activation time	( SCGCQ00235660 port of SCGCQ00220596) 
 - Creating mixed PI/non-PI volume fails	( SCGCQ00235663 port of SCGCQ00220046) 
 - USB: The usb device is not always discovered after a cold start	( SCGCQ00237773 port of SCGCQ00217192) 
 - Add PI to IR: BGI Changes - Add Fast Initialize	( SCGCQ00237872 port of SCGCQ00194018) 
 - IR 4K: IR Base 4K Support	( SCGCQ00243092 port of SCGCQ00222449) 
 - IR 4K: Metadata Changes	( SCGCQ00243103 port of SCGCQ00222424) 
 - A PI Hot Spare is allowed to failover to a non-PI volume with PI Mixing Disabled	( SCGCQ00243485 port of SCGCQ00243257) 
 - IR 4K: Internal IO 4K support	( SCGCQ00243509 port of SCGCQ00222497) 
 - (Hydra	( SCGCQ00260080 port of SCGCQ00260079) 
 - Ph13 IR: 0x8109:IFAULT_IR_NON_ZERO_IO_COUNT – seen while removing R0 member drive during Host IO’s	( SCGCQ00277814 port of SCGCQ00246057) 
 - Saving a host diagnostic trace buffer from the console does not work	( SCGCQ00279501 port of SCGCQ00245530) 
 - Remove hardcoded shift value in Raid Accelerator code path	( SCGCQ00280174 port of SCGCQ00242024) 
 - IR: PI: MDC runs on a SSD Volume created on a PI-enabled controller when roamed/activated after clean shutdown	( SCGCQ00294989 port of SCGCQ00220978) 
 - Update Toolbox CLI debug on firmware fault	( SCGCQ00307292 port of SCGCQ00268561) 
 - Inactive foreign volume information cannot be seen in SASBIOS when a native volume is deleted.	( SCGCQ00316588 port of SCGCQ00239295) 
 - Microcode Update Events for SAS2 Integrated RAID	( SCGCQ00317002 port of SCGCQ00268946) 
 - (IOP	( SCGCQ00326692 port of SCGCQ00260083) 
 - BST : Overnight build copy has to be modified to run from a new location.	( SCGCQ00471482 port of SCGCQ00359691) 
 - Added Gen 3 Support for Decoding Snapshot Buffers - Enhanced Debug Capabilities	( SCGCQ00472604 port of SCGCQ00353036) 
 - Enable parity checking in certain portions of the XMem and PCIe blocks	( SCGCQ00473403 port of SCGCQ00361701) 
 - (PL	( SCGCQ00473994 port of SCGCQ00382525) 
 - Golden Utility to create 8MB, 16MB, 32MB, and 64MB Flash Images	( SCGCQ00477175 port of SCGCQ00381826) 
 - IOP: Improve PCI-Express core register dump to assist debug	( SCGCQ00552439 port of SCGCQ00376555) 
 - IOP VPD compile option cleanup	( SCGCQ00552445 port of SCGCQ00382511) 
 - PL: SAT3 compliance - Implement translation of SCSI Sanitize command.	( SCGCQ00553450 port of SCGCQ00357129) 
 - Invader B0: IO Unit Page 7 Current Power Mode does not match the IOCSpeed after a reset.	( SCGCQ00554337 port of SCGCQ00369197) 
 - IOP: Fault 0x2628 at start of day	( SCGCQ00559718 port of SCGCQ00414504) 
 - (IOP	( SCGCQ00559721 port of SCGCQ00417993) 
 - IOP: SR-IOV firmware fails to respond correctly to VM initialization	( SCGCQ00564388 port of SCGCQ00422771) 
 - GenCRC utility incorrectly calculates the image size internally	( SCGCQ00564832 port of SCGCQ00564201) 
 - (IOP	( SCGCQ00565118 port of SCGCQ00446539) 
 - IOP: MCTP incorrectly obtains I2C Speed config using Mfg Page 8	( SCGCQ00565493 port of SCGCQ00422103) 
 - Check in target error injection code	( SCGCQ00565506 port of SCGCQ00393701) 
 - IOP: Enable MCTP support in IT/IR firmware.	( SCGCQ00565508 port of SCGCQ00396012) 
 - Messages can be check for corruption or corruption of the Packet Error Code (PEC	( SCGCQ00565509 port of SCGCQ00396020) 
 - SR-IOV: VFs performing firmware uploads unexpectedly are blocked	( SCGCQ00566113 port of SCGCQ00448263) 
 - cli commands iop fpe maxex & maxev value do not allow reseting to the max SOD setting	( SCGCQ00566121 port of SCGCQ00457383) 
 - (PL	( SCGCQ00566165 ) 
 - IOP: MCTP: I2C Address Byte ACKing by HW reduces time to transmit FW IN WRONG STATE Packet Exception	( SCGCQ00566194 port of SCGCQ00527722) 
 - IOC Init Multiple reply descriptor post queue host addresses	( SCGCQ00566241 port of SCGCQ00475659) 
 - ONFI library should not be built for default IT build	( SCGCQ00568399 port of SCGCQ00390519) 
 - Invalid debug print string for IOP_DBG_STR_MSG_HANDLER_PORT_ENABLE	( SCGCQ00665138 port of SCGCQ00661502) 
 - Add power condition ASC/ASCQ definition	( SCGCQ00725198 port of SCGCQ00606283) 
 - Firmware downgrade fails and firmware faults with code 0x070A	( SCGCQ00725243 port of SCGCQ00592281 ) 
 - IOP: MCTP: Packets with valid MCTP SeqCount values are dropped	( SCGCQ00725344 port of SCGCQ00673173) 
 - IOP: MCTP: Fault 0x2667 when set PCIe BusMaster, then clear, and send MCTP Request with PCIe VDM	( SCGCQ00725345 port of SCGCQ00675583) 
 - IOP: MCTP messages: Test size of MPI Event Notification Request in MCTP	( SCGCQ00725348 port of SCGCQ00645292) 
 - IOP: SR-IOV Virtual Functions are able to access BIOS configuration pages	( SCGCQ00725369 port of SCGCQ00664321) 
 - PL: Implement customer specific SAS topology restrictions	( SCGCQ00741763 port of SCGCQ00697961) 
 - Implement means of saving critical OEM config data so that it can easily be persisted through a firmware down-rev.	( SCGCQ00757684 SCGCQ00566512) 
 - Update Attribution Language - Copyright, Trademark, Confidentiality to Avago	( SCGCQ00758949 port of SCGCQ00729467) 
 - IOP: MCTP: Log Entry Added event triggered from wrong event	( SCGCQ00781343 port of SCGCQ00713624) 
 - IOP: CLI command to dump L1 data cache causes 0x265D fault	( SCGCQ00781347 port of SCGCQ00715317) 
 - IOP: Config page code null references and uninitialized variable fixes	( SCGCQ00781368 port of SCGCQ00730692) 
 - IOP: Config space read during startup can cause firmware lockup	( SCGCQ00781377 port of SCGCQ00735541) 
 - IOP: MCTP: PageType with non-zero Attributes for Config Page Request fails	( SCGCQ00793932 port of SCGCQ00755365) 
 - IOP: MCTP: Send Get VDM Support MCTP Control request and obtain incorrect padding size	( SCGCQ00793940 port of SCGCQ00767204) 
 - IOP: MCTP: Fail to find first entry when number of Log Page 0 Entries are less than 128	( SCGCQ00793941 port of SCGCQ00768566) 
 - IOP: Add GPIO Write protect pin feature for SBR EEPROM	( SCGCQ00816411 port of SCGCQ00790308) 
 - Ventura: MSS - FPGA fixes and other misc	( SCGCQ00821603 port of SCGCQ00810018) 
 - Tiger WW: Use controller LMids as SED SMids	( SCGCQ00839590 port of SCGCQ00804417) 
 - Tiger WW: Update to official MPI SED initialization messages	( SCGCQ00841599 port of SCGCQ00830343) 
 - Invader C0: Performance drops with PL version 0.250.113.0 on 2 R0 volumes behind Cobra	( SCGCQ00855687 port of SCGCQ00400569) 
 - non-SafeStor based SED support for EPD in SDS personality	( SCGCQ01294806 port of SCGCQ00882667) 
 - pl: NVMe: unexpected IO failures with firmware path read/write IOs to an NVMe SGL device	( SCGCQ01326943 port of SCGCQ01321013) 
 - Ventura: AltData select, RefClk Mux not setup for SGPIO initiator prior to init	( SCGCQ01328967 port of SCGCQ01321764) 
 - Ventura/Marlin: backend PCIe: IO halt after a link glitch	( SCGCQ01337661 port of SCGCQ01336859) 
 - PL : performance drop of nearly 40% in sequential write and seqential Reads	( SCGCQ01341898 port of SCGCQ01333993) 
 - PL Fault 0000d074 when run IOMeter overnight R0 fastpath	( SCGCQ01346368 port of SCGCQ01331410) 
 - Ventura: SPI FLASH fails to write data (fails on read-back	( SCGCQ01355010 port of SCGCQ01349880) 
 - NVMe-enabled firmware fails to host boot on a blank board	( SCGCQ01358762 port of SCGCQ01358750) 
 - ExpressSDS: Disable Recon on EPD volumes	( SCGCQ01368293 port of SCGCQ00881409) 
 - ESDS: in smartPoll thread Fail EPD if dontFailPdOnError in autoConfigParam is not set	( SCGCQ01368322 port of SCGCQ00901373 ) 
 - ExpressSDS: Avoid shield disk start for EPD drives	( SCGCQ01368377 port of SCGCQ00934598) 
 - eSDS:FW crash observed at line 245 in file ../../raid/1078int.c while doing target reset through storcli on EPD's	( SCGCQ01368399 port of SCGCQ00944248) 
 - eSDS: Avoid Write Cache Sync for EPDs	( SCGCQ01368410 port of SCGCQ0095146) 
 - eSDS_1.1: After flashing the merged binary firmware the previous configuration is moving into the foreign	( SCGCQ01370441 port of SCGCQ01023963) 
 - MR6.12_Code MergeIssue after Baseline	( SCGCQ01370447 ) 
 - Non SafeStor - FW reports failure when initiate "Instant Secure Erase" against Foreign Locked PDs	( SCGCQ01370531 port of SCGCQ01064725) 
 - Issue - During OCR when recon is in progress, fw breaks due to exception.	( SCGCQ01399526 port of SCGCQ01385063) 
 - Occasionally StorLib OOB commands fails due to I2C timeout	( SCGCQ01399822 port of SCGCQ01380640) 
 - 3408IMR set jbod on a specified disk will cause enter FW break into megamon	( SCGCQ01399885 port of SCGCQ01389506) 
 - PL: LUN Reset Option for Avoid Duplicate Mid Feature	( SCGCQ01401595 port of SCGCQ01399068) 
 - Ventura: Implement workaround for device attached to PCIe front end with IDT timer	( SCGCQ01430621 port of SCGCQ01401585) 
 - Replacing RAID Controller with Degraded VD Hangs System	( SCGCQ01430637 port of SCGCQ01393703) 
 - Customer experiences 5-7 % performance drop on 24 direct connected SAS SSD R10/R6 setup.	( SCGCQ01442976 port of SCGCQ01417361) 
 - CISCO LB PVT issue - Foreign import failure	( SCGCQ01445274 port of SCGCQ01391311) 
 - Ventura/Marlin: NMI due to Host-side PCE credit starvation when there are simultaneous accesses to MSIX table and Generic Messaging Queue	( SCGCQ01445831 ) 
 - Make TTY buffer Lossy	( SCGCQ01449236 ) 
 - Direct attached VSES Enclosure validation may fail with certain OS tools	( SCGCQ01451191 port of SCGCQ01445053) 
 - PL: EnclMgmt: Move ownership of SES Page 0x0A slot mapping from devices to PHYs	( SCGCQ01458359 port of SCGCQ00870423) 
 - Ventura: Add support for OEM specific NVMe backplane detection and slot LED control	( SCGCQ01460731 port of SCGCQ01346574) 
 - Ventura MR - MR 7.4 not discovering NVMe devices	( SCGCQ01462088 port of SCGCQ01453903) 
 - When PFA drive is attached, it does not show predictive failure is detected.	( SCGCQ01466076 port of SCGCQ01420232) 
 - Drives in Enclosure spin up values for OEM board is not initialized correctly	( SCGCQ01466079 port of SCGCQ01450221) 
 - Bad Drives in system causing Assert id!=MPT_FRAME_ALLOC_ID_ILLEGAL	( SCGCQ01466370 port of SCGCQ01446154) 
 - Disabling large IO support leads to invalid argument .	( SCGCQ01466389 port of SCGCQ01460440) 
 - Controller hangs after updating to latest ROP 676	( SCGCQ01470577 port of SCGCQ01422235) 
 - Block Downgrade of Firmware	( SCGCQ01472912 ) 
 - VSES Target not added in host if event replay slot ordering is enabled.	( SCGCQ01474945 port of SCGCQ01471601) 
 - Adding PnPId check for break/join mirror	( SCGCQ01486444 port of SCGCQ01288928) 
 - MPI SEP request to Slots with invalid SES Page 0A element index may not complete	( SCGCQ01487259 port of SCGCQ01482937) 
 - BMC emulator on Ventura failed with Storlib discovery	( SCGCQ01488146 port of SCGCQ01410607) 
 - Enhance SAS3 FW to pass PCIeCV PCIe Configuration Validation TD_1_28 Vital Product Data Capability Test	( SCGCQ01499168 port of SCGCQ00878239) 
 - Create compile option to disable SPL 2 power control	( SCGCQ01499175 port of SCGCQ01468141) 
 - PKG 886 10.1/When upgrading from 678 10.0 to 10.1 886 and switching to 240VD, I am unable to create 240VD	( SCGCQ01505145 port of SCGCQ01503263) 
 - pl: backend PCIe: 4311 fault with NVMe enabled	( SCGCQ01520574 port of SCGCQ01514521) 
 - Controller can not correctly detected smart error SATAA HDD.	( SCGCQ01521373 port of SCGCQ01506289) 
 - (SATA Only	( SCGCQ01524638 ) 
 - pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset	( SCGCQ01527219 port of SCGCQ01526236) 
 - Linux driver incorrect issuing MR_DCMD_DEV_GET_TARGET_PROP to enclosure devices	( SCGCQ01540362 port of SCGCQ01403758) 
 - Aero : Continous error( MptHostCmdDone cmdId=fe lmid=8a2:1851b400 tid 04 devH ..	( SCGCQ01558211 port of SCGCQ01540433) 
 - PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path	( SCGCQ01559005 port of SCGCQ01520524) 
 - Assertion failure in ../../mros/mem.c : mb->tag==tag	( SCGCQ01561911 ) 
 - pl: NVMe: Write Long (10	( SCGCQ01601702 ) 
 - (SATA Only	( SCGCQ01621654 ) 
 - AULBA divert bitmap not enabled on R5/R6 WT Vds	( SCGCQ01627798 port of SCGCQ01619858) 
 - USB - Enhance UART command line error reporting	( SCGCQ00155169 port of SCGCQ00149359) 
 - (IOP-Only	( SCGCQ00156183 port of SCGCQ00149388) 
 - (IOP-Only	( SCGCQ00160240 port of SCGCQ00160020) 
 - IOP: Uart console command "iop show sbr" only shows 1st copy of SBR correctly	( SCGCQ00160406 port of SCGCQ00152263) 
 - Manufacturing Page Block create routine should not be part of cfgi library build.	( SCGCQ00160460 port of SCGCQ00153144) 
 - (CFGI	( SCGCQ00163435 ) 
 - Unplugging USB end device during IOP USB TEST hangs firmware	( SCGCQ00164454 port of SCGCQ00150267) 
 - USB - Remove debug memory allocation from USB init	( SCGCQ00164456 port of SCGCQ00156250) 
 - Thunderbolt : USB Cache Offload Support	( SCGCQ00168679 port of SCGCQ00138336) 
 - MPB parser output skips 2 bytes of each MPB entry data	( SCGCQ00177564 port of SCGCQ00163581) 
 - IR: Support for >2TB drives	( SCGCQ00188493 port of SCGCQ00172837) 
 - IOP: memory leak in uart diag command	( SCGCQ00192204 port of SCGCQ00180224) 
 - USB: Diagnostic command does not write as much data as expected	( SCGCQ00193408 port of SCGCQ00182843) 
 - (IOP-Only	( SCGCQ00194475 port of SCGCQ00172979) 
 - (SRIOV-Only	( SCGCQ00201918 port of SCGCQ00179265) 
 - (IOP-Only	( SCGCQ00209165 port of SCGCQ00192918) 
 - 265D fault during hostboot on Mustang	( SCGCQ00225381 port of SCGCQ00152378) 
 - The fill pattern for the BBM section between 2048 and 4095 is incorrect.	( SCGCQ00243957 port of SCGCQ00231203) 
 - PL: SAS Gen-2 Open Reject (No Dest	( SCGCQ00258361 port of SCGCQ00247227) 
 - Add snapshot tool	( SCGCQ00269259 port of SCGCQ00231954) 
 - PL: Do not send up additional SAS Topology Change List Events for phys with a Function Result of Phy Vacant	( SCGCQ00437102 ) 
 - Enable UART during Critical Interrupt while in fault state by default	( SCGCQ00470297 port of SCGCQ00362615) 
 - In fault state, Ioc2Sys Doorbell IRQ is cleared before host polls the register to see the fault	( SCGCQ00471502 port of SCGCQ00367931) 
 - Invader C0: Power Management code is not checking the Substate Control Enable bit prior to changing to the power state.	( SCGCQ00559715 port of SCGCQ00384416) 
 - Fixed 6001 Fault Caused by Defects in Task Management	( SCGCQ00562743 port of SCGCQ00421304) 
 - Update product ID in the firmware header to Invader family.	( SCGCQ00563396 port of SCGCQ00415058) 
 - IOP: Sideband management message handling (Init, Inventory, ID, Version	( SCGCQ00565502 port of SCGCQ00391851) 
 - (NVDATA	( SCGCQ00566088 port of SCGCQ00406234) 
 - IOP: PCIe Compliance test failing config space read at start of day	( SCGCQ00566139 port of SCGCQ00460949) 
 - Changing PCI Link Width is not supported so we need to remove pci lnkwdw	( SCGCQ00566149 port of SCGCQ00464903) 
 - Added additional checks to MCTP Msg layer (iopMCTPMsgCmdStart(	( SCGCQ00566185 port of SCGCQ00504029) 
 - Update SAS9311-8i IR NVDATA for Channel configuration requirements	( SCGCQ00566223 port of SCGCQ00438969) 
 -	( SCGCQ00572868 port of SCGCQ00421660) 
 - ManPage14 XSD setting incorrect for RebuildAbort state	( SCGCQ00725234 port of SCGCQ00575789) 
 - PL: Update EDFBMaxGroupUnload default value to 4 and add debug features	( SCGCQ00725281 port of SCGCQ00551447) 
 - IOP: SR-IOV: Some SAS IO Unit Control messages from VFs are incorrectly rejected	( SCGCQ00781315 port of SCGCQ00694683) 
 - IOP: MCTP: Handle allocation failure for received packet and additional post-processing cleanup	( SCGCQ00781337 port of SCGCQ00710478) 
 - IOP: TLB initialization may fail to identify the running memory model	( SCGCQ00781359 port of SCGCQ00728893) 
 - IOP: MCTP packet exception could cause null pointer dereference	( SCGCQ00793920 port of SCGCQ00730742) 
 - IOP: MCTP: SenseData handling with MPI SCSI IOs causes firmware to lose those responses	( SCGCQ00793939 port of SCGCQ00767189) 
 - IOP: Correct change topology list event print	( SCGCQ00803153 port of SCGCQ00802751) 
 - ExpressSDS 1.1: True Multipath Host Task Management	( SCGCQ01294902 port of SCGCQ01024444) 
 - More latency observed during device discovery	( SCGCQ01327290 port of SCGCQ01311662) 
 - CSET: Disable PCIe support for 8e PHYs on 9400-8i8e NVMe - (SCGCQ01334509	( SCGCQ01335058 ) 
 - Ventura: Add TM IOCStatus to TM Logger	( SCGCQ01338919 port of SCGCQ01336984) 
 - 4k Read of EPMR12 is low comparing to OEM specific stream	( SCGCQ01350594 port of SCGCQ01283594) 
 - ISA: Blocking the creation of JBOD in EPD behaviour even when the enableJBOD is set	( SCGCQ01368239 port of SCGCQ00827012) 
 - Support auto-configuration option and parameter related events, show information for EPDs	( SCGCQ01378994 port of SCGCQ01024552) 
 - Making MCTP interrupt context code FIQ safe.	( SCGCQ01391425 port of SCGCQ01387060) 
 - Disks report incorrect rotational speeds	( SCGCQ01402214 port of SCGCQ01391462) 
 - Ventura: Implement workaround for device attached to PCIe front end with IDT timer	( SCGCQ01448014 port of SCGCQ01401585) 
 - OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned	( SCGCQ01458055 port of SCGCQ01287286) 
	Page 26 / 391
 - Replace Member PD failed to copy back on a 4KN data protected VD	( SCGCQ01459797 port of SCGCQ01455224) 
 - pl: port enable may fail to complete if an OEM backplane is attached	( SCGCQ01464752 port of SCGCQ01455680) 
 - PD FW update fails on iMR controller using MCTP over PCIe in from IMM debug console.	( SCGCQ01466972 port of SCGCQ01235906) 
 - MR7.0.1 iMR shows exception after flashing	( SCGCQ01467853 port of SCGCQ01325384) 
 - To check if NVRAM changes related to upgrade/downgrade issue is present	( SCGCQ01473201 port of SCGCQ01473186) 
 - set jbod on a Faulty disk will take several minutes to go to bad state	( SCGCQ01473796 port of SCGCQ01424679) 
 - Performance comparison-Reconstruction R1-R5, Degradation seen with latest release.	( SCGCQ01483109 port of SCGCQ01462723) 
 - iMR: storcli /c0 show termlog didnot get termlog sometimes	( SCGCQ01516689 port of SCGCQ01480662) 
 - When update Vendor SAS 2.5" 10K 12Gbps 300GB HHD (PN:SH20J34185	( SCGCQ01522339 port of SCGCQ01515259) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated	( SCGCQ01530305 port of SCGCQ01450475) 
 - Change detect feature support on UBM supported back plane	( SCGCQ01628416 port of SCGCQ01605371) 
 - IR: Invalid Print statement	( SCGCQ00138310 port of SCGCQ00137490) 
 - Ph7 IR: Do read IO load balancing for RAID10/RAID1E ASM volumes for better performance	( SCGCQ00153682 port of SCGCQ00141686) 
 - (IOP-Only	( SCGCQ00155118 port of SCGCQ00118431) 
 - Thunderbolt: Use additional sensors for temperature reporting	( SCGCQ00168582 port of SCGCQ00162475) 
 - (SRIOV-Only	( SCGCQ00201704 port of SCGCQ00176726) 
 - (SRIOV	( SCGCQ00203084 port of SCGCQ00152254) 
 - IR firmware causes fault 0x501 when SEND DIAGNOSTIC command is issued to a volume.	( SCGCQ00294678 port of SCGCQ00240830) 
 - ASCQ is not set Correctly in Self-Test Results Log Page When SEND DIAGNOSTIC Fails for SATA Drive	( SCGCQ00469664 port of SCGCQ00339568) 
 - Combined reply queue feature	( SCGCQ00472419 port of SCGCQ00374225) 
 - After updating mfg page 2 using config request (write NVRAM	( SCGCQ00472481 port of SCGCQ00395216) 
 - Invader/Fury C0 NVData	( SCGCQ00477181 port of SCGCQ00349992) 
 - Remove unused files from source control	( SCGCQ00552478 port of SCGCQ00391834) 
 - IOP: Script updates to work around GHS probe issue	( SCGCQ00559722 port of SCGCQ00420299) 
 - (IOP	( SCGCQ00566098 port of SCGCQ00432887) 
 - Changing PCI Link Speed is not supported so we need to remove pci lnkspdw	( SCGCQ00566124 port of SCGCQ00457388) 
 - Invader fails PCI-SIG configuration space testing while running the following test on the transmit margin field: Test TD_1_41.	( SCGCQ00566143 port of SCGCQ00461411) 
 - IOP: MCTPMsg: CmdStatus and Event Clean-up not consistent with SCS MCTP Spec	( SCGCQ00566195 port of SCGCQ00527732 ) 
 - Invader: Add Fault Code - Abort Task Missed Its IO with Pend Flag Set	( SCGCQ00566201 port of SCGCQ00559156) 
 - NVDATA Option to Allow Force Dual Context On	( SCGCQ00566265 port of SCGCQ00501686) 
 - MCTP: Add support for PCIe VDM binding	( SCGCQ00725272 port of SCGCQ00481147) 
 - IOP: ISTWI fails to initialize variable and out of bounds array access	( SCGCQ00781351 port of SCGCQ00728104) 
 - In case of Raid 6 and medium error on the drives, if the driver state is manually changed to OFFLINE, FW hits a DMA error	( SCGCQ01198938 port of SCGCQ01162896) 
 - Parallel HDD microcode update support	( SCGCQ01282809port of SCGCQ01023507) 
 -	( SCGCQ01294891 ) 
 - ATA Passthrough MPT frame content has overwritten	( SCGCQ01348118 port of SCGCQ01339127) 
 - Non SafeStor - EPD Push/pull, result into Foreign drive state (ddfType=10 isBroken=0 locked=1 secure=1	( SCGCQ01370528 port of SCGCQ01064307) 
 - ESDS1.1: A kill adapter at line 1280 is observed with IO and cable breaker in multipath with MPIO enabled on RHEL7.2	( SCGCQ01370532 port of SCGCQ01065343) 
 - Replacing RAID Controller with Degraded VD Hangs System	( SCGCQ01403745 port of SCGCQ01393703) 
 - Interrupting Offload will Lead to Next offload cycle to fail	( SCGCQ01404400 port of SCGCQ01399701) 
 -	( SCGCQ01453934 port of SCGCQ01451306) 
 - MR 7.4 : Default VD policy in MR 7.4 is not matching with MR 7.3	( SCGCQ01462731 port of SCGCQ01460649 ) 
 - CISCO - Enable OCR for all release builds.	( SCGCQ01470795 port of SCGCQ01294922 ) 
 - Spare filtering does not prevent NVMe PD from being used as spare for SAS/SATA array.	( SCGCQ01478265 port of SCGCQ01441173) 
 - MR7.3 & 7.4 With iMR Unconfigured NVMe drives become Unconfigured Bad When Converting Them to JBODs	( SCGCQ01483142 port of SCGCQ01479017) 
 - Global HDD LED may not indicate IO activity for NVMe or SAS drives	( SCGCQ01496628 port of SCGCQ01489030) 
 - Disable write cache to default	( SCGCQ01504375 SCGCQ01485047) 
 - OCR is disabled by default is RC build, even NVDATA if it is enabled.	( SCGCQ01520061 port of SCGCQ01503204) 
 - FW automatically delete and create the EPD's with assigning EPD no 3f indefinitely.	( SCGCQ01540335 port of SCGCQ01509726) 
 - Correct minimum voltage calculation of Supercap	( SCGCQ01619844 port of SCGCQ01558901) 
 - FW logging fatal error in case of chip reset, but driver not loaded.	( SCGCQ01623751 port of SCGCQ01594199) 
 - (SATA Only	( SCGCQ01731910 port of SCGCQ01638248) 
 - A config page request to erase log entries in the flash fails.	( SCGCQ00165925 port of SCGCQ00153033) 
 - Fault 0x100 prevents code from running at SOD	( SCGCQ00204223 port of SCGCQ00200602) 
 - rbd: Add changes to strip extra header from text dump	( SCGCQ00365484 port of SCGCQ00365466) 
 - IOP FW : 265D fault after enabling DDR3 2nd rank support	( SCGCQ00471479 port of SCGCQ00300270) 
 - MCTP: Add support for MPI requests	( SCGCQ00565512 port of SCGCQ00396398) 
 - Bootloader: Boot time performance improvements	( SCGCQ00566261 port of SCGCQ00490972) 
 - IOP: MCTP: Debug mode to provide additional information for the Invalid Parameter Packet Exception	( SCGCQ00566267 port of SCGCQ00505168) 
 - Base Address Register at offset 0x1C (BAR3	( SCGCQ00816424 port of SCGCQ00795305) 
 - SafeStor support for EPD in SDS personality in 1.1	( SCGCQ01294894 port of SCGCQ00990749) 
 - Allocate alias targetId for EPDs when true multipath has enabled!	( SCGCQ01294901 port of SCGCQ01024648) 
 -	( SCGCQ01294904 port of SCGCQ01109051) 
 - ESDS: The serial number of the Hitachi drives are truncated when a show pdfailevents options is performed.	( SCGCQ01368373 port of SCGCQ00932844) 
 - Move the ready state after the pin cache is flushed completely	( SCGCQ01368389 port of SCGCQ00941249) 
 - 0x6001 Fault due to a missing IO that went through the IO resubmit path	( SCGCQ01369963 port of SCGCQ01330777) 
 - Handling SEP partner for Expander removal/insertion and path removal insertion	( SCGCQ01370442 port of SCGCQ01024970) 
 - Initiate ocr when FW enters MonTask	( SCGCQ01398246 port of SCGCQ01381615) 
 - USB SCSI commands failing due to I/O timeout.	( SCGCQ00193409 port of SCGCQ00176341) 
 - Command file for PL library distribution did not create a valid ZIP file for the CFGi library.	( SCGCQ00475100 port of SCGCQ00362462) 
 - ISA: Avoid clearing the DDF area for the EPD drive as part of VD delete or clear configurations.	( SCGCQ01368247 port of SCGCQ00837059) 
 - Enable I2C polling for drive presence detection in VPP Type B backplanes with NVMe support.	( SCGCQ01460733 port of SCGCQ01375330) 
 - Spare filtering does not prevent NVMe PD from being used as spare for SAS/SATA array.	( SCGCQ01466124 port of SCGCQ01441173) 
 - Fast Path IO is not failed for LDBBM table entries	( SCGCQ01466133 port of SCGCQ01452385) 
 -	( SCGCQ01466844 port of SCGCQ01420670) 
 - Disable T10 Protection Information support	( SCGCQ01487806 port of SCGCQ01484321) 
 - Add method to determine Ring Buffer Overflow in RMC	( SCGCQ01503207 port of SCGCQ01484941) 
 - Kill Adapter while running IOs on 64 VDs (including slice VDs	( SCGCQ01601265 port of SCGCQ01548019) 
 - LSA version 4.132 shows blank page or extreme sluggish to do anything	( SCGCQ01715426 port of SCGCQ01698418) 
 - SEEPROM Support for 16 byte page/ 1 bit addressing for SBR in Gen2 FW	( SCGCQ00141061 port of SCGCQ00132374) 
 - Replace POM0 usage with SysDma	( SCGCQ01448534 port of SCGCQ01430023) 
 - System will pop up “Cannot communicate with iButton to …” during reboot with customer iMR card (FW:50.2.1-0597	( SCGCQ01450218 port of SCGCQ01447988) 
 - Added NVME passthrough support for MR stack	( SCGCQ01451159 port of SCGCQ01391416) 
 - MR 7.4 - PDs pull/push led to "Assertion failure in ../../cpu/arm/exceptions.c at line 938: 0"	( SCGCQ01484822 port of SCGCQ01460017) 
 - The SUT can’t boot to OS after 159 loops AC cycle and check the Raid 930-16i 8G	( SCGCQ01788547 port of SCGCQ01788479) 
 
 
EnhancementRequests 
 - MPI 2.5: Power Management( SCGCQ00066241 ) 
 - Look into Qfull handling	( SCGCQ00081065 ) 
 - Update firmware to correctly dump all SAS Core registers	( SCGCQ00090999 ) 
 - Gen3: SHELL Performance Monitor	( SCGCQ00095392 ) 
 - Manufacturing Config settings for End Device Frame Buffering	( SCGCQ00123628 ) 
 - Gen 3: remove Release On Full option for diag trace buffer( SCGCQ00125496 ) 
 - MPI2: review Task Set Full handling	( SCGCQ00125662 ) 
 - Gen 3: add 12Gb/s option for link rate( SCGCQ00125672 ) 
 - MPI2: add Link Rate of UNSUPPORTED_PHY_ATTACHED	( SCGCQ00125683 ) 
 - [Internal Use Only] Control of Loopback mode through the UART( SCGCQ00126580 ) 
 - Add basic support for new hardware block state timers in SAS core blocks	( SCGCQ00127730 ) 
 - Modify mfg page 3 to incorporate back channel training.( SCGCQ00131013 ) 
 - pl: Power condition support in SATL - mode page 0x1A	( SCGCQ00131186 ) 
 - pl: Power condition support in SATL: Start/Stop Unit	( SCGCQ00131188 ) 
 - Allow Config Write Current of Manufacturing Page 5 after PortEnable	( SCGCQ00131631 ) 
 - Update the Quiesce IO/TM/SMP code for gen3 generic availability	( SCGCQ00131981 ) 
 - Thunderbolt: The B0 revision handles the SAS clock setup differently.( SCGCQ00132812 ) 
 - Customer Liberator Design without DDR2 requires IT firmware config option to power down/not use DDR2 Controller( SCGCQ00133967 ) 
 - Firmware build needs to link pre-built DDR library, instead of compiling it with the rest of firmware( SCGCQ00134473 ) 
 - (IOP-Only( SCGCQ00135183 ) 
 - (NVDATA	( SCGCQ00136652 ) 
 - Gen3: Changes to support 4port bond option( SCGCQ00136691 ) 
 - Gen3 PwrMgmt: Add IOP & PL infrastructure for chip-wide power management modes( SCGCQ00136946 ) 
 - Gen3 PwrMgmt: Add IOP support for PCIe Dynamic Power Allocation (DPA	( SCGCQ00136955 ) 
 - MPI2: bring Diagnostic Data Upload Tool forward from MPI v1.5( SCGCQ00137489 ) 
 - Thunderbolt B0: Update SBR( SCGCQ00138057 ) 
 - Add ability to disable Liberator Bugtrack [Nova] 540 workaround( SCGCQ00139949 ) 
 - (Non-FPGA Only( SCGCQ00141231 ) 
 - (FPGA-Only( SCGCQ00141569 ) 
 - Disable SASAllInts Interrupts going to the host through PCI-E( SCGCQ00141627 ) 
 - Invader: Incorporate Colt EDS 1.1 support for modified QM registers.	( SCGCQ00141765 ) 
 - Ensure RX DMA IO cleanup matches latest Colt EDS 1.1	( SCGCQ00141768 ) 
 - MPI2: ability to disable SATA NCQ on a per-device basis	( SCGCQ00141834 ) 
 - (IOP-Only( SCGCQ00141859 ) 
 - TxDMA error handling update for NonAuto Bit implementation( SCGCQ00141867 ) 
 - Gen3: Change SAS2HW_CHIP_ID to SASHW_CHIP_ID	( SCGCQ00142520 ) 
 - MPI2: obsolete MPI2_IOUNITPAGE1_MULTI_PATHING( SCGCQ00142578 ) 
 - Updates to makefile for gen3	( SCGCQ00143642 ) 
 - GENCRC: Update build enviornment to new toolset( SCGCQ00144028 ) 
 - Gen3 Task Mgmt Debuggability & Testability Improvements( SCGCQ00144418 ) 
 - convert pliDevHandleFind( SCGCQ00144456 ) 
 - Update PPC ticks to reflect new clock speed in Invader FPGA( SCGCQ00144514 ) 
 - Add support for LD state table in Cuda( SCGCQ00144627 ) 
 - Add UART command to send down a PLI control request	( SCGCQ00145596 ) 
 - change FPE exception INVALIDE_DESCRIPTOR handling from doing an error reply to just handing off to IOP( SCGCQ00146110 ) 
 - Trident: Update firmware to EDS 1.01	( SCGCQ00146112 ) 
 - Update FW to match Invader EDS v1.3	( SCGCQ00147317 ) 
 - Reserved MID 0x1 for special use	( SCGCQ00147930 ) 
 - Updates to Trident( SCGCQ00147952 ) 
 - New MMU management functions for PPC476( SCGCQ00148628 ) 
 - Implement proper memory map translation for DMA'ing data to/from host/IOC( SCGCQ00148721 ) 
 - add rom image to release build file( SCGCQ00148737 ) 
 - txdma cleanup changes from Colt EDS 1.21	( SCGCQ00149016 ) 
 - TBM: Host posted Extended Buffer has to be 16KB aligned	( SCGCQ00149045 ) 
 - Add additional PPC476 MMU utility functions to support boot loader( SCGCQ00149224 ) 
 - PALLADIUM: Allow the spurious interrupt workaround to work for palladium build as well.( SCGCQ00149231 ) 
 - Add an RMTFLASH script to program a BIOS image into FLASH( SCGCQ00149685 ) 
 - add PLI control request support for Vendor Specific case 1( SCGCQ00149688 ) 
 - add PLI control request support for FPE Config 3 FpUseLdTableFlags bit( SCGCQ00149689 ) 
 - FPE: need to add an additional flags parameter to pliStartScsIO(	( SCGCQ00151001 ) 
 - First Set of Invader/Elektra DDR3 changes( SCGCQ00151263 ) 
 - Add code to initialize Elektra Memory System on FPGA	( SCGCQ00153736 ) 
 - Gen3 IR - Selectable Consistency Checking( SCGCQ00154734 ) 
 - Implement Extended Manufacturing Page 40 and 41. These two pages replace mfg page 3.	( SCGCQ00155477 ) 
 - DevTest: Timer services test code checkin( SCGCQ00156252 ) 
 - FPGA: Update current FPGA build configuration to better match current state of the FPGA( SCGCQ00157831 ) 
 - MPI2: Add new Config Page Type - Extended Manufacturing( SCGCQ00157968 ) 
 - MPI 2.5: Chain SGL Segment sizes	( SCGCQ00157982 ) 
 - Change Trident FMU address macros to match correct hardware address decodes( SCGCQ00159978 ) 
 - Obsolete Man Page 15	( SCGCQ00159985 ) 
 - Implement functional section changes as per Colt EDS 1.3.( SCGCQ00160464 ) 
 - MPI2: Change MPI Simple SGE Local bit description and IEEE Chain Flags to match HW( SCGCQ00160485 ) 
 - TBM: Enable TBM by default in all builds	( SCGCQ00160594 ) 
 - TBM: Dump the TraceBuffer entries on FW Fault( SCGCQ00160595 ) 
 - Include debug strings in diag buffer	( SCGCQ00161332 ) 
 - FPE: implement start pending IO function for FPE devices	( SCGCQ00161456 ) 
 - Update resource allocation parameters in NVDATA( SCGCQ00161657 ) 
 - MPI2: Add IOC Temperature Monitoring Capability( SCGCQ00161661 ) 
 - Add support for both MPI & IEEE SGLs in IR's Configuration Request Message support( SCGCQ00162072 ) 
 - MPI2: rework Pinout field of ConnectorInfo for MFG Page 7( SCGCQ00162562 ) 
 - TBM: Set TraceType for devices from host	( SCGCQ00162901 ) 
 - Add L3 cache support	( SCGCQ00163170 ) 
 - MPI2: IOUnit page 7: Add new fields for Board temperature( SCGCQ00163413 ) 
 - MPI 2.5: SCSI Initiator I/O path counters (SAS IO Unit Page 16( SCGCQ00163641 ) 
 - Add UART command to determine if the IOC is in fault state( SCGCQ00163729 ) 
 - TBM: Add debug code for TBM errors( SCGCQ00164570 ) 
 - PL Light: add pliLight equivalent for get mid state table info( SCGCQ00165286 ) 
 - MPI2: new event for NOTIFY(Enable Spinup	( SCGCQ00166171 ) 
 - Implement new Atomic ECC scrub feature( SCGCQ00167136 ) 
 - Add PLI control request to specify power management modes for Cuda fast path engine.	( SCGCQ00167819 ) 
 - FPE: remove Cuda timer if IO is timed by cuda and TM aborts it( SCGCQ00168251 ) 
 - FPE: changes to ioflags usages for reply destination and ignore context	( SCGCQ00168410 ) 
 - Round 5 of gen2 WA removal( SCGCQ00168602 ) 
 - MPI 2.5: remove Command Determines Data Direction bit from SCSI IO	( SCGCQ00169936 ) 
 - FPE: TM abort list should be checked when handlign Cuda Timer Wheel timeouts	( SCGCQ00169942 ) 
 - Remove support for SAS3108_3 and SAS3108_4 chip types( SCGCQ00170560 ) 
 - Gen3: RAID Accelerator changes( SCGCQ00171770 ) 
 - add support for new IocFactsReply.IOCMaxChainSegmentSize field( SCGCQ00171810 ) 
 - Gen3 IR - Remove BT1680 work around from IR	( SCGCQ00172046 ) 
 - Update Ethernet software to work with the Invader controller	( SCGCQ00172834 ) 
 - MPI2: for SRIOV, allow PF to access config pages for other VFs( SCGCQ00172984 ) 
 - Gen3: FW support for PowerPC Instruction Trace (ITRACE( SCGCQ00173574 ) 
 - Add PLI defnies for FPE Power Savings modes( SCGCQ00173648 ) 
 - Implement new FLASH layout for Invader( SCGCQ00175740 ) 
 - MPI2: method to communicate between hosts on virtual functions( SCGCQ00175743 ) 
 - Firmware handling for non-good response frame to halt SAS Core and disable Fast Path Engine( SCGCQ00176261 ) 
 - MPI 2.5: new Power Performance Change Event to report changes to global power management mode( SCGCQ00176893 ) 
 - Gen3: USB( SCGCQ00177075 ) 
 - SAS-3 FW Build - Accommodate Scrutiny( SCGCQ00177124 ) 
 - MPI 2.5: report offset of first EEDP error in SCSI IO Reply( SCGCQ00177635 ) 
 - Update RxCtxMgr Cleanup to match new gen3 hardware functionality	( SCGCQ00178840 ) 
 - Further clean-up of linker directive files in preparation for Invader silicon( SCGCQ00179257 ) 
 - HW WA for BT COSEDA 790 - setup starfish regs as the HW defaults are incorrect( SCGCQ00179616 ) 
 - Remove [SAS2Core] 1656( SCGCQ00180309 ) 
 - PL: allow each phy to initialize its electrical parameters from the proper phy group	( SCGCQ00181727 ) 
 - FPE: disable FPE Timer when faulting	( SCGCQ00181784 ) 
 - Handle new RxCtxManager interrupt in B0	( SCGCQ00183299 ) 
 - Gen3 Nightly Build : Make the necessary changes in the overnight build copy perl file for gen3( SCGCQ00183622 ) 
 - Update Invader eval board SBR settings in NVDATA	( SCGCQ00183907 ) 
 - Change frequency for internal UART clock to match silicon( SCGCQ00184806 ) 
 - Set up PIM2 to allow access to expansion ROM	( SCGCQ00185739 ) 
 - FPE: Add PLI interface to allow IOP to write MSindex, VF_Id and SMID into Cuda's MST	( SCGCQ00187301 ) 
 - Update controller clock divider setup for Invader silicon.( SCGCQ00187961 ) 
 - Update Default NVData to Run Invader at 1GHz	( SCGCQ00188063 ) 
 - Invader Ethernet Updates	( SCGCQ00188150 ) 
 - Gen3 PwrMgmt: Wide Port Power Management to support 'Communicated Intent Modulation Scheme'( SCGCQ00188249 ) 
 - Update TFTP Firmware Download for Invader( SCGCQ00192532 ) 
 - Need a PLI control request to get the SAS core version( SCGCQ00192893 ) 
 - Changes to IOP firmware in order to support DDR	( SCGCQ00193790 ) 
 - Update iop pci reg to print FMU registers( SCGCQ00194247 ) 
 - MPI2: product specific range for extended image type	( SCGCQ00194293 ) 
 - MPI2: Add auto reserve and 8-kbit seeprom support to ISTWII( SCGCQ00194461 ) 
 - ONFI: Controller Initialization	( SCGCQ00194672 ) 
 - ONFI: Prepare Bad Block List	( SCGCQ00194674 ) 
 - ONFI: Restore offloaded data on boot up from NAND flash( SCGCQ00194677 ) 
 - 3rd set of DDR3 library changes	( SCGCQ00198958 ) 
 - Update TM to have a "marker" mid for the Colt->Cuda completion Queue	( SCGCQ00199733 ) 
 - New serdes settings from SE	( SCGCQ00200293 ) 
 - Make SMP requests high priority and ensure they don't get queued behind other contexts( SCGCQ00200476 ) 
 - DDR3 library global structure for training values is too large( SCGCQ00201056 ) 
 - MPI2: Remove/Obsolete MPI Power Management Control Feature PCIE_LINK	( SCGCQ00201203 ) 
 - MPI2: Add spin-up disable bit to SAS IO Unit Page 4	( SCGCQ00201727 ) 
 - Replace call to BIST with call to cache zero	( SCGCQ00202468 ) 
 - Add FW support for new B0 RxFM/RxCM"WrongDataDirection interrupts( SCGCQ00202861 ) 
 - Gen3: MPI PowerManagementControl request msg parameters need to verified before processing.( SCGCQ00203386 ) 
 - Change Clear/Set IO Unit State to use atomic processor instructions	( SCGCQ00203396 ) 
 - Customer requests change to DDR3 library interface function iopiDelayUSec( SCGCQ00203665 ) 
 - Add a wrapper around iopiDelayUSec for call from DDR3 library( SCGCQ00203667 ) 
 - MPI2: New RAID Action (COMPATIBILITY_CHECK( SCGCQ00203886 ) 
 - Change to register settings from SE validation( SCGCQ00204041 ) 
 - Support to handle Unconfirmed Responses reported by SAS HW( SCGCQ00205974 ) 
 - Changes to better support highest speeds	( SCGCQ00206640 ) 
 - Support latest revision of JEDEC SPD	( SCGCQ00207165 ) 
 - Gen3 IR - Optimize resync buffer size for enhanced resync performance on Gen3 controllers.( SCGCQ00207724 ) 
 - Gen3 IR - Optimize IR code( SCGCQ00208291 ) 
 - MPI2: Return Port info in the SAS Device Status Change Event	( SCGCQ00209048 ) 
 - MPI2: create product-specific range for RAID Action Request( SCGCQ00209055 ) 
 - Update chip recognition code so that it will identify all chip types	( SCGCQ00209388 ) 
 - ONFI: Add UART commands to test ONFI MAP Commands( SCGCQ00209640 ) 
 - Invader Performance: Do not allocate FPE queue when disabled	( SCGCQ00209915 ) 
 - Need a mechanism to enable snoop regions in SAS	( SCGCQ00210177 ) 
 - ONFI: Updates to ONFI UART commands	( SCGCQ00210291 ) 
 - Add MR build types to "bld31xxgnu" and to the "all" build( SCGCQ00210495 ) 
 - Disable SSC for all speed( SCGCQ00210602 ) 
 - PL: check in new serdes settings	( SCGCQ00213218 ) 
 - ONFI: Update batch file for release( SCGCQ00213281 ) 
 - ONFI: Enable ONFI interrupt and add UART commands( SCGCQ00215328 ) 
 - Invader PLB snoop region configuration( SCGCQ00215430 ) 
 - MPI2: new name for SCSI IO Request Control bits( SCGCQ00218764 ) 
 - Add an UART cmd line to toggle the testmux pins( SCGCQ00219300 ) 
 - Bit field name change to CCR Module-Specific Resets 1 register (changed in Invader EDS v2.2( SCGCQ00219840 ) 
 - Enclosure Management Changes for Direct Attached SEP	( SCGCQ00221114 ) 
 - Invader A0: Hardware Workaround to support proper VfEnable handling in FPE hw during MUR	( SCGCQ00221352 ) 
 - Invader Performance Improvements (Part 1	( SCGCQ00221359 ) 
 - Create new API for user to set up entry into Memory Controller Low Power modes( SCGCQ00222557 ) 
 - Combine Big and Little Endian Binary releases into a single generic non-source release( SCGCQ00222561 ) 
 - Invader A0: optimize prints to disable io printing when TBM is enabled( SCGCQ00222985 ) 
 - Invader A0 PL FPE Start IO performance optimzation( SCGCQ00223252 ) 
 - Update TxFM cleanup code for gen3( SCGCQ00224494 ) 
 - Updates to new SnC Method from HW.( SCGCQ00224783 ) 
 - Gen3 IR - Implement Raid Action to allow drivers to enable firmware fast path( SCGCQ00227402 ) 
 - ONFI: Interface function name changes( SCGCQ00227457 ) 
 - Additional XML Schema Changes.( SCGCQ00227512 ) 
 - MPI 2.6 Add Atomic Request Descriptor capability	( SCGCQ00227735 ) 
 - Invader: Update PCIe Core for EDS 1.03( SCGCQ00227979 ) 
 - MPI2: add 4K sectors supported bit to IOC Page 6 CapabilitiesFlags field	( SCGCQ00228572 ) 
 - MPI2: BIOS Page 1 additions for UEFI HII	( SCGCQ00229719 ) 
 - Make DDR3 fault codes unique	( SCGCQ00229872 ) 
 - Invader: Enable Machine Check Interrupts	( SCGCQ00234935 ) 
 - Initialize Port Layer Settings such as ALF bit and Port Link Availability initial count from Man Page 17	( SCGCQ00237340 ) 
 - (SAS3 IR	( SCGCQ00237718 ) 
 - ONFI: Mirroring ONFI Flash( SCGCQ00239455 ) 
 - ONFI: Add api for getting memory required for bad block list	( SCGCQ00239699 ) 
 - Investigate a method to have PL always turn FPE back on at the end of TM	( SCGCQ00242895 ) 
 - ONFI: Enhance the failure status reporting in ONFI Library( SCGCQ00245401 ) 
 - Invader: Update Ethernet clock configuration to use external clocks( SCGCQ00246665 ) 
 - IOP: Fault on PCI-Express Interrupt PLB RW Processor Error( SCGCQ00246666 ) 
 - IOP: Support different SBD size in GET_SERIAL_BOOT_DATA_SIZE( SCGCQ00246872 ) 
 - ONFI: Consistency in Channel and Bank naming	( SCGCQ00250933 ) 
 - IOP Cli: Show IOP Message context( SCGCQ00251001 ) 
 - A modified IT controller firmware build is needed in order to test Fastpath IO Timer functionality( SCGCQ00254775 ) 
 - ONFI: Offload and Restore Performance Improvement( SCGCQ00255129 ) 
 - ONFI mirroring APIs need to work for only a single Channel.( SCGCQ00255918 ) 
 - (IOP	( SCGCQ00257882 ) 
 - MPI v2.6: Additional request and reply descriptor formats( SCGCQ00259613 ) 
 - Invader A0: (PL	( SCGCQ00261860 ) 
 - Update B0 WA matrix for all fixed FPE issues	( SCGCQ00261863 ) 
 - [USB]: BT [invader]1682 : Implement workaround for ULPI PHY reset sequence( SCGCQ00262724 ) 
 - (NVDATA	( SCGCQ00263859 ) 
 - MPI 2.6: SOP Encapsulated request( SCGCQ00264755 ) 
 - MPI 2.6: NVMe Encapsulated request( SCGCQ00264759 ) 
 - IOP: Update the IOP Workaround table for B0	( SCGCQ00265859 ) 
 - Parameter swap_port_rw_same_en not supported in DDR Memory Controller( SCGCQ00268568 ) 
 - Allow for MPI 2.5 IEEE Chain Element in SATA Passthrough Request	( SCGCQ00268818 ) 
 - IOP: Reorganize the code where firmware copies the code from flash to DDR to make it more readable( SCGCQ00269227 ) 
 - Change handling of silicon revision and add B0 support( SCGCQ00271076 ) 
 - NVDATA: Enable Back Channel Training by default in nvdata( SCGCQ00271106 ) 
 - IOP: Disable power loss interrupt( SCGCQ00277808 ) 
 - Add comments to ddrifault.h( SCGCQ00278372 ) 
 - Gen3 IR - Enable PI support in NVDATA for 3004 and 3008( SCGCQ00280131 ) 
 - New Serdes settings that meet the spec requirement	( SCGCQ00283165 ) 
 - Toolbox Diagnostic CLI Request now uses IEEE SGL, including chain elements( SCGCQ00283196 ) 
 - MPI2: Toolbox Diagnostic CLI Tool Request may now use chain elements in the SGL( SCGCQ00283198 ) 
 - Added Cable Management file to PL makefile( SCGCQ00284543 ) 
 - Post-training compensations for an imbalance in the setup/hold timing( SCGCQ00289581 ) 
 - Disabled FW chain pull code in IR.( SCGCQ00290601 ) 
 - MPI 2.6: add Escape Passthrough bit to IO Flags of SCSI IO Request & Target Assist Request( SCGCQ00294055 ) 
 - MPI 2.6: update SGL chapter to include PCIe	( SCGCQ00294131 ) 
 - Enabled Parity Checking for L2 Cache	( SCGCQ00295557 ) 
 - Add argument in ONFI Restore APIs to pass RestoreTimeoutValue( SCGCQ00298497 ) 
 - MPI2: add IOCExceptions bit for Partial Memory Failure( SCGCQ00299943 ) 
 - Add 2 new fault conditions.( SCGCQ00304933 ) 
 - Modify mfg11 so it's the same size as gen2( SCGCQ00307672 ) 
 - Update legacy DCR assembly instructions to use new indexed instructions( SCGCQ00307945 ) 
 - MPI2: IR reporting Elapsed Seconds( SCGCQ00308453 ) 
 - PL: Enable back channel training for controller phys.( SCGCQ00321647 ) 
 - (IOA	( SCGCQ00323012 ) 
 - New DDR3 library API to obtain ECC information and return it to the caller( SCGCQ00333267 ) 
 - MPI 2.6: PCIe IO Unit Page 0 & 1 definitions	( SCGCQ00336383 ) 
 - Invader C0: Combined Reply Queue Feature	( SCGCQ00337165 ) 
 - MPI2: Add TargetModeAbort by initiator device handle	( SCGCQ00337167 ) 
 - MPI 2.5: additional requirements for some IOCs that support more than 8 MSI-x vectors( SCGCQ00338506 ) 
 - Modify firmware to work with Combined Reply Q Mode( SCGCQ00340458 ) 
 - SCSI to NVMe dataset management translations	( SCGCQ00341219 ) 
 - MPI2: Add new TargetModeAbort AbortType to only abort Command IUs( SCGCQ00345215 ) 
 - MPI 2.6: add IO Unit Control Request	( SCGCQ00345258 ) 
 - MPI 2.6: add PCIe Event Data (Generic( SCGCQ00345260 ) 
 - MPI 2.6: PCIe Topology Change List Event	( SCGCQ00345266 ) 
 - MPI 2.6: PCIe Switch Config Pages( SCGCQ00345270 ) 
 - MPI 2.6: add PCIe Device Config Pages( SCGCQ00345271 ) 
 - MPI 2.6: PCIe Link Config Pages	( SCGCQ00345272 ) 
 - MPI 2.6: Enclosure Management( SCGCQ00345273 ) 
 - Additional SCSI to NVMe translations	( SCGCQ00345822 ) 
 - (FPGA( SCGCQ00352412 ) 
 - Device Info field for PCIe devices( SCGCQ00353339 ) 
 - (IOP	( SCGCQ00356717 ) 
 - MPI2: Use Slot Information during Port Enable Event Replay option( SCGCQ00356796 ) 
 - MPI2: Add OEM Identifier to BIOS Page 1	( SCGCQ00357228 ) 
 - SATA FIS Porting feature support	( SCGCQ00357509 ) 
 - MPI 2.6: add host page size to IOCInit Request and IOCFacts Reply( SCGCQ00357551 ) 
 - SAS Gen3.5 FW Spinup Control Implementation( SCGCQ00360815 ) 
 - MPI 2.6: add Port Request bit to IoFlags field of SCSI IO Request( SCGCQ00360843 ) 
 - MPI 2.6: new family values for ProductID fields( SCGCQ00360952 ) 
 - Modify ddriGetCurrentEccErrorInfo API( SCGCQ00361251 ) 
 - Add memport error register definitions to the memport header file currently distributed with library.( SCGCQ00361253 ) 
 - (STANG( SCGCQ00362507 ) 
 - [Dauntless]: SGL Translation - IEEE-64 to SOP/PQI( SCGCQ00362773 ) 
 - Added new internal tool, no change to FW	( SCGCQ00362950 ) 
 - MPI 2.6: move all SAS IO Unit Page 4 functionality to IO Unit Page 11( SCGCQ00363600 ) 
 - (IOP	( SCGCQ00367858 ) 
 - Backend PCIe device memory allocation (part 2( SCGCQ00372536 ) 
 - Added support for async removal and insertion for PCIe devices.( SCGCQ00377853 ) 
 - (NVDATA( SCGCQ00378825 ) 
 - Added support for handling new Stang exceptions( SCGCQ00379989 ) 
 - USB : BT [invader]1653 :ULPI Function Control Register Write gets corrupted by a Soft Reset( SCGCQ00380011 ) 
 - pl: pci: DevHandle allocation for PCI switches( SCGCQ00380149 ) 
 - (IOA	( SCGCQ00381819 ) 
 - This week's NVMe related changes	( SCGCQ00383672 ) 
 - Allow Protection Information bit for IR Volume Create( SCGCQ00385306 ) 
 - (IOP	( SCGCQ00391086 ) 
 - MPI2: Add STATUS QUALIFIER to SCSI IO Error Reply( SCGCQ00396414 ) 
 - Modified address space bits	( SCGCQ00397136 ) 
 - MPI 2.6: Add PCIe IO Unit Page 4	( SCGCQ00397563 ) 
 - MPI 2.6: PCIe Device Page 2 reporting MDTS for NVMe devs	( SCGCQ00397568 ) 
 - MPI 2.6: Add board power fields to IO Unit Page 7( SCGCQ00397572 ) 
 - MPI 2.6: Add support for SAS Persistent Connections( SCGCQ00397577 ) 
 - Additional diag console commands	( SCGCQ00398216 ) 
 - MPI 2.6: Add NVMe SGL support( SCGCQ00398256 ) 
 - FW Read/Write IO Path base functionality	( SCGCQ00400466 ) 
 - FW Read/Write IO Path - NVME Helper functions( SCGCQ00400467 ) 
 - FW Read/Write IO Path - AHCI helper functions( SCGCQ00400472 ) 
 - FW Read/Write IO Path - Additional PCI protocol Helper functions	( SCGCQ00400473 ) 
 - No firmware change, tool change only	( SCGCQ00400547 ) 
 - Use generic IO context structure throughout the NVMe code( SCGCQ00400554 ) 
 - NVMe: Update NVMe non read write translations( SCGCQ00401386 ) 
 - Added code to support new high order bits register for scripts physical addresses( SCGCQ00406167 ) 
 - (IOP	( SCGCQ00412128 ) 
 - New debug information -- dumping of AHCI registers	( SCGCQ00412145 ) 
 - MPI2: Security Freeze Lock support during SATA Init (IO Unit Page 1 Flag	( SCGCQ00414050 ) 
 - Test code for sending large reads and writes	( SCGCQ00415461 ) 
 - MPI 2.5: Toolbox Console Text Display Tool( SCGCQ00415512 ) 
 - Add PLI control request for getting host memory page size( SCGCQ00418127 ) 
 - SAS Gen3.5 Additional PCI Encapsulated MPI Message Support( SCGCQ00418649 ) 
 - Firmware Support for NVMe encapsulated MPI message( SCGCQ00420063 ) 
 - Add base PCIe Task Management and AHCI device Task Management support( SCGCQ00420317 ) 
 - Update iopiMemoryMove( SCGCQ00420399 ) 
 - Added support for translating PLB/DDR addresses in simple SGEs for AHCI devices( SCGCQ00420512 ) 
 - (PL	( SCGCQ00420887 ) 
 - Added code to reject firmware translation of chain to AHCI PRDT format( SCGCQ00421777 ) 
 - Add ALADIN tracing support in PL	( SCGCQ00423378 ) 
 - (IOA	( SCGCQ00425000 ) 
 - MPI 2.6: Add NVMe SGL support to IEEE SGL( SCGCQ00432541 ) 
 - MPI 2.6 Rev. B Feature Section 17.3.20.3: Add support for PCIe Device Page 2	( SCGCQ00432568 ) 
 - PCIe IO Unit Page 1 NVMe Max Queue Depth	( SCGCQ00432741 ) 
 - MPI 2.6 Rev. B Feature: Move all SAS IO Unit Page 4 Spinup Control and PortEnable functionality to IO Unit Page 11.( SCGCQ00433597 ) 
 - Dauntless FPGA: Unable to initialize with MSI-X enabled( SCGCQ00436413 ) 
 - Need better way to set up PDB POMs( SCGCQ00436942 ) 
 - Add Stang Exception error handling for SOP( SCGCQ00441252 ) 
 - Added IO Unit Control Request in MPI v2.6 B to replace existing SAS IO Unit Control Request( SCGCQ00443274 ) 
 - MPI 2.6 Rev. B Feature: Section 17.3.2.8: Added BoardPowerRequirement and PCISlotPowerAllocation fields to IO Unit Page 7.( SCGCQ00443278 ) 
 - Implementation of SATL handling while the SATA drive is in security 'frozen' state( SCGCQ00443282 ) 
 - Added PCIe IO Unit Page 4.( SCGCQ00443286 ) 
 - SAS3.5: Move ALADIN HW defines and register structures to separate header file under \common\hw.	( SCGCQ00448020 ) 
 - Handle PCIe Fx-FPE completion queue wrapping while manually adding TM entries.( SCGCQ00449817 ) 
 - NVMe: Start device initialization earlier	( SCGCQ00449822 ) 
 - Dauntless FPGA: Slight reset behavior modification	( SCGCQ00451177 ) 
 - Dauntless FPGA: Allow standard DDR3 training to run if DDR is enabled in Manufacturing Page 11( SCGCQ00453573 ) 
 - New IOP Interface to allow mapping of larger memory resources (>1G	( SCGCQ00455575 ) 
 - AHCI: Add handlers for IO and port errors( SCGCQ00459853 ) 
 - AHCI: Add handlers for requester/completer errors( SCGCQ00459876 ) 
 - MPI 2.6: System Interface Register Set update( SCGCQ00464402 ) 
 - MPI 2.5: IOCInit multiple Reply Descriptor Post Queue addresses( SCGCQ00466819 ) 
 - MPI 2.5: Signed images for FWDownload( SCGCQ00469990 ) 
 - MPI 2.5: obsolete "Limit SATA max rate to 1.5 Gbps"( SCGCQ00471293 ) 
 - Rudimentary Advanced Error Reporting support	( SCGCQ00473858 ) 
 - Update PQI and SOP header files to latest revision( SCGCQ00474533 ) 
 - Create and use generic PCI and PCI Express headers( SCGCQ00477114 ) 
 - Ventura: NVMe: Shutdown notification for NVMe devices.( SCGCQ00477716 ) 
 - MPI 2.5: add reserved fields to IO Unit Page 7 for future use( SCGCQ00477817 ) 
 - IOP: Special MSI/ MSIx error interrupt fault	( SCGCQ00478193 ) 
 - Remove _SATA_TRANSMIT_PORT_SELECT_SIGNAL in IO Unit Control Request( SCGCQ00480292 ) 
 - Ventura: PL Dual/Multiple Iop Completion Queue (MR-11( SCGCQ00481273 ) 
 - Ventura: Trace Buffer Manager Updates - Extended Mode (DMA( SCGCQ00481274 ) 
 - Encl Mgmt: Support for the new PBAM LED control and SGPIO HW block( SCGCQ00490950 ) 
 - Ventura: Investigate Performance Monitors( SCGCQ00492549 ) 
 - SOP: Base device error handling for IO exceptions( SCGCQ00494457 ) 
 - MPI 2.6: shutdown operation for IO Unit Control Request( SCGCQ00496998 ) 
 - SAS Gen3.5 Additional PCI Encapsulated MPI Message Support - Additional Fixes( SCGCQ00498556 ) 
 - PL: SOP/PQI Task Management support( SCGCQ00521567 ) 
 - Ventura: Combo Serdes Wrapper Support( SCGCQ00521573 ) 
 - Ventura: Silicon Address Map Changes	( SCGCQ00521681 ) 
 - Ventura: Update CCR Register Definitions	( SCGCQ00521691 ) 
 - Ventura: Remove XMEM	( SCGCQ00522458 ) 
 - Ventura: IOA – Impala IO Accelerator Cuda Trace Buffer Manager Block Bring Up( SCGCQ00522532 ) 
 - Identify physical location of a target device( SCGCQ00523879 ) 
 - Ventura: DRAM Memory Controller - Preliminary DDR4 Support( SCGCQ00527826 ) 
 - Enterprise: header file( SCGCQ00552408 ) 
 - Enterprise PIM/POM setup	( SCGCQ00552409 ) 
 - Enterprise: register usage and indexing in the backend PCIe code( SCGCQ00552412 ) 
 - Enterprise: base core initialization	(SCGCQ00552422 ) 
 - Ventura: Enterprise: toplevel interrupt handler	( SCGCQ00552429 ) 
 - Ventura: Enterprise: sub-block interrupt handling infrastructure	( SCGCQ00552432 ) 
 - Enterprise: backend device interrupt configuration and handling	( SCGCQ00552447 ) 
 - Enterprise: root complex changes, part 1	( SCGCQ00552480 ) 
 - Ventura: Update Product ID	( SCGCQ00563371 ) 
 - NVMe: Extended Inquiry Data VPD page	( SCGCQ00563906 ) 
 - MPI 2.6: Add supported link rates and widths for PCIe devices( SCGCQ00564281 ) 
 - Port PL and CFGI library builds to ARM for Ventura( SCGCQ00564814 ) 
 - Add type BIOS for HashImageType.	( SCGCQ00566306 ) 
 - MPI 2.0: Add product-specific Flag bit to Clean Tool	( SCGCQ00569175 ) 
 - Port SPI library build to ARM( SCGCQ00570147 ) 
 - NVMe: Support for Mode Sense (10	( SCGCQ00571441 ) 
 - Ventura: Add support for new interrupts in Raptor SAS core( SCGCQ00572622 ) 
 - MPI 2.6: Add additional NVMe AccessStatus codes	( SCGCQ00574070 ) 
 - Change armCache functions and header files to armMmu	( SCGCQ00574345 ) 
 - MPI2: Allow UEFI and BIOS to be Enabled/Disabled individually( SCGCQ00574358 ) 
 - Modify MPI FLASH Layout for Ventura( SCGCQ00574364 ) 
 - Increase layout size for DAUNTLESS build to 1.5MB as the image size has grown too large( SCGCQ00574367 ) 
 - Create initial build of IOP for ARM( SCGCQ00577404 ) 
 - Port Ethernet Library to ARM	( SCGCQ00579966 ) 
 - Hardware Workaround Matrix For Ventura IOP layer( SCGCQ00586265 ) 
 - SAS3.5 DAUNTLESS: Implement rmtflash for SPI Flash in Dauntless	( SCGCQ00593527 ) 
 - Ventura: Create Ventura XSD and other NVDATA files( SCGCQ00594077 ) 
 - Update Intruder SBR and PCIe SerDes settings	( SCGCQ00598439 ) 
 - SpiLib enahancement( SCGCQ00598956 ) 
 - MPI 2.6: Add BootFlags field to Firmware Image Header( SCGCQ00601869 ) 
 - Intruder: TLB changes to match new top-level address map of FPGA bitstream release 1	( SCGCQ00603459 ) 
 - Intruder top-level interrupt map for FPGA Bitstream Release 0.5	( SCGCQ00603463 ) 
 - Remove usage of FWDebugAreaBaseAddress from PLI_SET_SOD_PARAMS( SCGCQ00603490 ) 
 - PL: Determine the number of SAS Cores present( SCGCQ00603493 ) 
 - add Intruder FPGA build	( SCGCQ00604632 ) 
 - Ventura: POC7 Map Update	( SCGCQ00606237 ) 
 - Ventura: DRAM Memory Controller - Heterogeneous Rank Support	( SCGCQ00606241 ) 
 - SATL: Changes to SCSI Format Unit translation( SCGCQ00606271 ) 
 - MSS: Initial Code Import	( SCGCQ00606274 ) 
 - Ventura: Firmware connect appropriate FLASH routines to SPI	( SCGCQ00606312 ) 
 - Intruder: review usage of #if DAUNTLESS in start-of-day code	( SCGCQ00606374 ) 
 - Allow for separate Ventura and Intruder versions	( SCGCQ00610916 ) 
 - Ventura: SAS Persistent Connection support( SCGCQ00612657 ) 
 - Ventura: SAS Initiate Close support	( SCGCQ00612661 ) 
 - Modify basetype.h to be device independent( SCGCQ00612747 ) 
 - Ventura: Ventura Temperature Monitor Support	( SCGCQ00612780 ) 
 - Speed up bld31xxgnu all	( SCGCQ00616571 ) 
 - Intruder: IOP interrupt map (Release 1.0	( SCGCQ00617602 ) 
 - Intruder: Update gIopHwDevId and gMpi2SupportedDevices( SCGCQ00619370 ) 
 - MPI 2.6: Add new FLASH region types( SCGCQ00619371 ) 
 - Create xml and xsd files for Intruder( SCGCQ00619416 ) 
 - Intruder: Update SBR	( SCGCQ00619417 ) 
 - Intruder: IOP changes for FPGA bringup( SCGCQ00619448 ) 
 - PL: update SAS Core DCR interface for multiple SAS cores	( SCGCQ00620384 ) 
 - PL bringup on Intruder FPGA( SCGCQ00620516 ) 
 - Intruder FPGA updates( SCGCQ00621476 ) 
 - Investigate iopSODCheckPcePimSizes(	( SCGCQ00621483 ) 
 - MPI 2.6: Added an additional signature value for the firmware image header( SCGCQ00623271 ) 
 - Removed gplPciDeviceDma( SCGCQ00628093 ) 
 - Intruder: adding build command files	( SCGCQ00628333 ) 
 - Enterprise: allocate memory at SOD for generic message data queue( SCGCQ00629194 ) 
 - Modified NVMe code to use new safe accessor functions for PCIe read/write.( SCGCQ00630198 ) 
 - Ventura PBAM(Vayu( SCGCQ00631219 ) 
 - Updated IOP interrupt handler function to handle multiple SAS Cores.	( SCGCQ00632495 ) 
 - Update PLI_SET_SOD_PARAMS as per new PLI spec( SCGCQ00637694 ) 
 - PL-only: Provide support for CloseOptimize in PL	( SCGCQ00638922 ) 
 - Modified AHCI error handling to use new safe accessor functions for PCIe read/write(SCGCQ00639213 ) 
 - Add ALADIN support to Ventura.( SCGCQ00642196 ) 
 - NVMe: several SCSI-NVMe related changes( SCGCQ00642831 ) 
 - Ventura: SIO/LED control enable PCI/SAS device activity support( SCGCQ00642853 ) 
 - UTILITY: Add memcfg utility for ARM products	( SCGCQ00642860 ) 
 - Intruder: Intregrate with new DDR3 library( SCGCQ00644369 ) 
 - Ventura: ARM Generic Timer Integration( SCGCQ00644382 ) 
 - IOP: MCTP over I2C updates for Ventura class hardware( SCGCQ00644461 ) 
 - Ventura: POC8C Bringup( SCGCQ00646636 ) 
 - Ventura: Local Chain Support (CR-15	( SCGCQ00647786 ) 
 - Update usage of IOC_NUM_PHYS	( SCGCQ00649610 ) 
 - Ventura: Change readPIR(	( SCGCQ00652365 ) 
 - Ventura: MSS - Hybrid MRAM DIMM SPD Conversion Interface Function( SCGCQ00652983 ) 
 - Updates for FPGA phase 0.3	( SCGCQ00654885 ) 
 - Ventura: Enterprise: revisit base core init	( SCGCQ00655157 ) 
 - Incorporate DDR4 RDIMM functionality.( SCGCQ00655293 ) 
 - Ventura: Create initial A57 A64-Booting Image( SCGCQ00656357 ) 
 - Intruder: Remap SASCORE1 in virtual address space with no overlap( SCGCQ00660501 ) 
 - Modify Diag commands to handle multiple SAS core.( SCGCQ00661114 ) 
 - Move PBAM interrupts for Release 1.6 bitstreams	( SCGCQ00663206 ) 
 - Enable SAS1 interrupts( SCGCQ00663855 ) 
 - Enterprise: preparation for Enterprise interrupt and device interrupt support( SCGCQ00664180 ) 
 - Add Intruder Specific Define for Number of SGPIO Instances( SCGCQ00664340 ) 
 - MPI 2.6: additional AccessStatus values for PCIe Device Page 0( SCGCQ00664957 ) 
 - Ventura: Enable PBAM HeartBeat LED functionality	( SCGCQ00665975 ) 
 - Ventura: Map remaining cores as described in the original Ventura map up to POC10( SCGCQ00667112 ) 
 - Backend PCI: move device interrupt info structure( SCGCQ00668627 ) 
 - PL Sim additonal work( SCGCQ00668850 ) 
 - Enterprise: PDB MSI/MSI-x handler compatible with Enterprise	( SCGCQ00669530 ) 
 - Add check for Detroit PLB parity error by reading DCR regs( SCGCQ00669726 ) 
 - Ventura: SIO/LED control initialization	( SCGCQ00671021 ) 
 - Intruder: Firmware Dual context settings cleanup and setting dequeuing modes.( SCGCQ00674213 ) 
 - Ventura: SOP TM updates	( SCGCQ00675384 ) 
 - Intruder: Extend Manufacturing Pages support in master xsd file( SCGCQ00676261 ) 
 - Ventura: GPIO initialization	( SCGCQ00676410 ) 
 - Backend PCI: generate Set Slot Power Limit message( SCGCQ00676417 ) 
 - Review Intruder EDS v1.8 for CCR changes that apply to FW	( SCGCQ00680173 ) 
 - MPI v2.6: Added Intruder / Cutlass device IDs for manufacturing pages	( SCGCQ00680527 ) 
 - Enterprise: tie legacy/MSIx interrupt handlers in with HW interrupts	( SCGCQ00680763 ) 
 - Ventura: Enterprise: DM PCIe Core start of day configuration	( SCGCQ00680765 ) 
 - Ventura: SPI library Callbacks need to be implemented for register read/writes.	( SCGCQ00681306 ) 
 - Ventura: Enterprise: update header file for new product definition	( SCGCQ00682820 ) 
 - PL: Remove plCompileOptions.h from the list of files needed for pli	( SCGCQ00682887 ) 
 - Support IOA Local RAM - IOP Changes	( SCGCQ00682893 ) 
 - Intruder FPGA Release 2.0 address map( SCGCQ00683085 ) 
 - Ventura: Enterprise: move backend lane dependent code in PCIe Device Manager	( SCGCQ00684295 ) 
 - PL: final cleanup of PL_INFO NumPhys and HwNumPhys( SCGCQ00685227 ) 
 - MPI 2.5: distribute Target Command Buffers Received across multiple reply queues	( SCGCQ00685820 ) 
 - Ventura: Enterprise: PCIe IO Unit Page 1 write handler( SCGCQ00686614 ) 
 - MPI 2.6: Extend Task Management - Target Reset Method to include PCIe devices( SCGCQ00686666 ) 
 - Ventura: merge SAS phy devhandle and PCIe phy devhandle usage( SCGCQ00686670 ) 
 - Intruder: modify PL build/release process to include IntruderFpga.xsd( SCGCQ00688174 ) 
 - Ventura: Provide more MMU table memory( SCGCQ00688248 ) 
 - Intruder & Ventura: Consolidate Reply Destination defines across various Cuda cores( SCGCQ00688686 ) 
 - Ventura: Enterprise: backend link speed/width control code( SCGCQ00690945 ) 
 - Dauntless: Add back in the copying of NVDATA for MR PL Builds( SCGCQ00692123 ) 
 - Ventura: Support to send MID’s in FxCore FxRequestor engines to Exception queue for TM trapping( SCGCQ00694241 ) 
 - Ventura: Support for HW CR to perform device handle check for PCIe device IO completions	( SCGCQ00694244 ) 
 - Ventura: Integrate PCIe Discovery with Port Enable handling( SCGCQ00694260 ) 
 - Update 'iop perfmon show' for multi core support	( SCGCQ00695443 ) 
 - Intruder: update 'iop show tlb'( SCGCQ00695530 ) 
 - Update chip linker directive file for how much memory is available( SCGCQ00695546 ) 
 - MPI 2.5: BIOS Page 1 additions( SCGCQ00700829 ) 
 - Ventura: Enable SCSI commands from uart( SCGCQ00702618 ) 
 - Updated master.xsd file with IntruderFpga.xsd changes( SCGCQ00703470 ) 
 - Ventura: Internal GIC and CCI support( SCGCQ00704455 ) 
 - Intruder: (IOP( SCGCQ00706279 ) 
 - Ventura: Update top level interrupt mapping to 1.2 version of EDS( SCGCQ00707300 ) 
 - Intruder: (IOP	( SCGCQ00707767 ) 
 - Ventura: Enable SAS Core Interrupts	( SCGCQ00709564 ) 
 - SAS3.5: Separate out SAS Phy Power Management so we can compile out the code if it is not working properly.( SCGCQ00709570 ) 
 - Intruder: prepare iopWorkArounds( SCGCQ00709601 ) 
 - Ventura: IT FW SPI Flash Boot - Remote FLASH	( SCGCQ00710132 ) 
 - Initial addition of Intruder specific build environment	( SCGCQ00710203 ) 
 - Ventura: Verify FIS Porting feature in the HW( SCGCQ00710210 ) 
 - Add QM Exception Queue Registers to PL Diagnostic Code( SCGCQ00710465 ) 
 - Provide interface to IOP to get local address to backend PCI address mapping.( SCGCQ00712817 ) 
 - Add Multi SAS Core support for Target Mode Hardware cleanup	( SCGCQ00712972 ) 
 - More multi core upgrades to Target Mode code	( SCGCQ00715204 ) 
 - Ventura: Add NVSRAM decode region to map for SPILIB testing	( SCGCQ00715637 ) 
 - Ventura: Make fast path selectable for SCSI Uart commands( SCGCQ00723335 ) 
 - PL: Implement section 7.7 of the NVMe specification( SCGCQ00723596 ) 
 - MPI 2.5: update copyright info( SCGCQ00728066 ) 
 - Ventura: Create NIC-400/DPE-400 Header File( SCGCQ00731690 ) 
 - Ventura: CSW Added Implement PLI Interrupt Handlers( SCGCQ00733171 ) 
 - Add IOP start queue for secondary processor( SCGCQ00734296 ) 
 - Intruder DDR3: Update register fields based on new MC spec( SCGCQ00734424 ) 
 - Ventura: Modify FPGA Build to support boot from SPI FLASH with XmemCopy( SCGCQ00734979 ) 
 - Ventura: If possible, eliminate the 4K guardband between the MMU table and the unmapped space( SCGCQ00735500 ) 
 - Ventura: Move Remote FLASH Application start to targeted OCM location( SCGCQ00736518 ) 
 - Ventura: reject backend PCIe devices that do not support MSI-x( SCGCQ00740574 ) 
 - Remove SAS_PL_ONLY macro	( SCGCQ00754441 ) 
 - Ventura: add CPU number to Reply Dest define	( SCGCQ00756765 ) 
 - Added the Interrupt map for Intruder A0	( SCGCQ00758572 ) 
 - Extend MFG Page 17 fields to accomodate more phys( SCGCQ00759493 ) 
 - Intruder: support for 84 GPIOs and 1 system heart beat LED using two GPIO modules( SCGCQ00759513 ) 
 - Ventura: Create GIC SGI code	( SCGCQ00759725 ) 
 - Ventura: Port synchronization macros from PPC to ARM	( SCGCQ00759731 ) 
 - Ventura: Implement cache Invalidate (and clean( SCGCQ00759733 ) 
 - Ventura: Create Official IT FPGA Build Release Scripts	( SCGCQ00762847 ) 
 - Ventura: Add SAS AI Slave register definitions( SCGCQ00764299 ) 
 - Intruder DDR3: For FPGA only, force High Temperature Refresh Settings to be used	( SCGCQ00765077 ) 
 - Dauntless: Build related changes	( SCGCQ00765117 ) 
 - Intruder: Route Non-Auto TxFM Interrupts to SAS Exception Queue	( SCGCQ00766711 ) 
 - Intruder: Allow Multiple SATA FIS Port IOs Outstanding( SCGCQ00768012 ) 
 - Ventura: Increment the number of IOP timers	( SCGCQ00768056 ) 
 - Remove fast path development test support( SCGCQ00769248 ) 
 - pl: Add some sanity checks for backend phy, port, SASCore mapping( SCGCQ00771332 ) 
 - Ventura: Simplify Versioning	( SCGCQ00771858 ) 
 - Intruder: Add support for RGMII phy used on Intruder Eval board( SCGCQ00774222 ) 
 - MPI 2.6: Add device off flag to SCSI Enclosure Processor messages( SCGCQ00776177 ) 
 - Ventura: Decrease FPGA RamLoad Boot Time	( SCGCQ00781011 ) 
 - Ventura: Add Contiguous Hint Capability for Code sections( SCGCQ00783007 ) 
 - MPI 2.5: add WWID to BIOS Page 3	( SCGCQ00785208 ) 
 - Ventura: MSS - Update HW header files to latest( SCGCQ00789522 ) 
 - MPI 2.6: New Phy event codes added to Ventura( SCGCQ00789600 ) 
 - Ventura: PCIe Discovery should yield to the IOP scheduler( SCGCQ00789678 ) 
 - Ventura: add FPGA build with backend PCIe code( SCGCQ00790217 ) 
 - MPI 2.5: BIOS Page 1 BiosOptions Advanced Adapter Configuration Enable( SCGCQ00791885 ) 
 - modify output filenames used in a build batch file( SCGCQ00793209 ) 
 - Move Intruder NVDATA files to separate from other projects.( SCGCQ00793214 ) 
 - SAS3.5 cleanup project and remove all Invader out of Intruder/Dauntless( SCGCQ00793562 ) 
 - Ventura: Add ARM directives to assist in debug( SCGCQ00798838 ) 
 - Ventura: Enterprise: update Enterprise header files	( SCGCQ00799993 ) 
 - Ventura: Distribute PL Object Modules into PLI defined archives	( SCGCQ00801716 ) 
 - Ventura: Add the option to build smaller mini-release library binaries	( SCGCQ00803151 ) 
 - Ventura: backend PCIe: attempt some backend PCIe image size reduction	( SCGCQ00803550 ) 
 - Ventura: backend PCIe: configuration of host side mapping resources	(SCGCQ00805418 ) 
 - Ventura: Enterprise: add error tracker( SCGCQ00806134 ) 
 - Ventura: RMC handling of the various silicon resets	( SCGCQ00810262 ) 
 - Ventura: Enable multiple SAS core support( SCGCQ00811125 ) 
 - Backend PCIe: revisit FxCore requestor cleanup during TM	( SCGCQ00812748 ) 
 - Ventura: Port IOP Memory Requirements CLI Code	( SCGCQ00812990 ) 
 - Aladin Core Register Definition Updates	( SCGCQ00813022 ) 
 - MPI 2.6: Add capability to send FPDMA/NCQ commands via SATA Passthrough	( SCGCQ00813389 ) 
 - Ventura: Remove IO bit-bucketing code( SCGCQ00813416 ) 
 - Ventura: add RMC System timer( SCGCQ00813419 ) 
 - Remove Sas Port Virtualization(SPV( SCGCQ00813465 ) 
 - Ventura: RMC Interrupts( SCGCQ00813494 ) 
 - IOP: Update hardware to receive PCIe messages( SCGCQ00813957 ) 
 - Ventura: MSS - finish unfinished code	( SCGCQ00814452 ) 
 - Ventura: MSS - New registers from latest Memory Controller Hardware documentation( SCGCQ00814456 ) 
 - Ventura: MSS - DDR4 VREF training	( SCGCQ00814464 ) 
 - Ventura: MSS - read fifo (DFI_RL	( SCGCQ00814472 ) 
 - Update NVDATA_Bindings for Intruder	( SCGCQ00815576 ) 
 - Update pl utility functions to retrieve Hardware Context pointers to be remote core compatible( SCGCQ00816272 ) 
 - Intruder: Remove Ethernet and DDR support from normal IT firmware builds	( SCGCQ00816434 ) 
 - update FW Header to indicate MPI v2.6( SCGCQ00816899 ) 
 - SAS3.5FW: update to latest MPI v2.6 header files	( SCGCQ00817142 ) 
 - Ventura DA A/R: PCIE error Handling : Device side configurations	( SCGCQ00817999 ) 
 - Ventura: backend PCIe: some bringup changes	( SCGCQ00818337 ) 
 - Handling errors from pliPortEnable( SCGCQ00818760 ) 
 - Cleanup of INTRUDER_PORTING	( SCGCQ00819220 ) 
 - Tiger: Add PL FW support to account for External SED SAS Cores during MaxSasCorenum considerations( SCGCQ00819898 ) 
 - Ventura: Eliminate references to capabilities structures in DM and PCI core (hardware( SCGCQ00820930 ) 
 - Ventura: Port SysDMA PCIE Messaging Capabilities to new hardware	( SCGCQ00820943 ) 
 - Ventura: Create Maverick.h header that compiles	( SCGCQ00820945 ) 
 - Ventura: PIM/POM setup Porting( SCGCQ00820946 ) 
 - Ventura: backend PCIe: some bringup changes( SCGCQ00821615 ) 
 - Ventura DA A/R: TM Code changes related to PCIe error handling.( SCGCQ00821974 ) 
 - Ventura DA A/R: FxCore Interrupt/exception handling related to PCIe errors.	( SCGCQ00821979 ) 
 - Implement PCIe error recovery by handling AER interrupt generated by root port for direct attached PCIe devices.( SCGCQ00821994 ) 
 - Ventura: Update CCR header file and code to latest EDS revision	( SCGCQ00822252 ) 
 - Ventura: Port misc low-level PCI CLI debug functions	( SCGCQ00822556 ) 
 - pl: backend PCIe: modify TM device status check timers as in device init	( SCGCQ00823052 ) 
 - Ventura Tiger: add enumeration support for Tiger and Tiger emulator	( SCGCQ00823434 ) 
 - AAPL 2.0.0 Integration with the ComboSerdes Library	( SCGCQ00824299 ) 
 - Updated maverick.h to EDS 2.0.8	( SCGCQ00824524 ) 
 - Ventura: Enterprise: PIM/POM mapping bringup	( SCGCQ00824588 ) 
 - Send periodic NOTIFY(SPINUP	( SCGCQ00824941 ) 
 - Update the Serdes AAPL to 2.1.0	( SCGCQ00825070 ) 
 - Ventura: Use consistent method for printing DevHandle and Mid( SCGCQ00825825 ) 
 - MPI 2.6: BootDeviceSelect and Host Boot changes for Ventura( SCGCQ00827088 ) 
 - Implement Comboserdes Library Functions for Hardware Initialization( SCGCQ00827427 ) 
 - Ventura SW A/R: Handle SHEX Stall on application errors	( SCGCQ00827432 ) 
 - Ventura: MSS - APIs or functionality from Invader or Intruder that has not been included in Ventura( SCGCQ00827507 ) 
 - RMC support for cache offload( SCGCQ00828214 ) 
 - MPI 2.6: add PCI Device ID's	( SCGCQ00828497 ) 
 - Ventura: backend PCIe: some bringup changes( SCGCQ00829039 ) 
 - Ventura DA A/R: Define PCIe error related status codes and log info codes( SCGCQ00829228 ) 
 - Update Ventura interrupt handlers( SCGCQ00829571 ) 
 - Ventura - PLI naming tweaks for PIM/POM (part 2( SCGCQ00830094 ) 
 - Ventura: Consolidate setting of TOPNIC( SCGCQ00830711 ) 
 - Ventura Tiger- Update SOD memory calculation for SASCore Completion Queues to account for remote SAScores( SCGCQ00830799 ) 
 - Set Number of VFs and Number of Host Credits in MFG Page 9( SCGCQ00831053 ) 
 - MPI 2.6: methods to report Active Cable power problems( SCGCQ00831588 ) 
 - SAS3324 Eval Card Partial NVDATA Plus Cable Management Enabled Version( SCGCQ00831674 ) 
 - Virtual SES SGPIO Support( SCGCQ00832629 ) 
 - Marlin: backend PCIe: support additional link configurations	( SCGCQ00832638 ) 
 - Marlin: x144 DDR Support	( SCGCQ00832642 ) 
 - Update Intruder feature identification bits( SCGCQ00832700 ) 
 - IOP: Add Intruder A0 to the list of supported devices( SCGCQ00832713 ) 
 - IOP BL (Ventura( SCGCQ00832991 ) 
 - Integrate PCIe link events with PCIe Discovery and Device Manager( SCGCQ00833319 ) 
 - Ventura: backend PCIe: some bringup changes( SCGCQ00833580 ) 
 - Ventura: backend PCIe: PLI address pool tweak( SCGCQ00833813 ) 
 - SAS9305-16e Partial NVDATA Plus Cable Management Enabled Version	( SCGCQ00834180 ) 
 - SAS9305-24i Partial NVDATA Plus Manufacturing Page 13 Settings( SCGCQ00834181 ) 
 - IOP: Configure Intruder SAS cores register locations	( SCGCQ00834206 ) 
 - Ventura: Support Raptor R10 and R31	( SCGCQ00834846 ) 
 - PL: Check in the latest serdes settings for Intruder A0 silicon	( SCGCQ00835410 ) 
 - BL: Remove SBR loaded check in initialization code( SCGCQ00835438 ) 
 - Bootloader: Re-enable SBR initialization check( SCGCQ00835455 ) 
 - Guinness CSW Library updates after integration with SAS35X48	( SCGCQ00836774 ) 
 - Ventura: backend PCIe: reporting of device link capabilities in PCIe Device Page 0( SCGCQ00836800 ) 
 - IOP: Fully support additional I2C cores( SCGCQ00836903 ) 
 - RMC: Cache offload support for OCM flush, pausing offload, error handling( SCGCQ00837742 ) 
 - Intruder A0: Multiple NVDATA Changes	( SCGCQ00838057 ) 
 - Ventura: backend PCIe: resolve some NVMe TM TODOs( SCGCQ00839540 ) 
 - Ventura: Increase FPGA "FakeRAM" size to 4MB	( SCGCQ00839552 ) 
 - Ventura Tiger: Setup remote cores on Ventura IOA	( SCGCQ00841008 ) 
 - Ventura: Update FPE Ring Buffer Indices to Impala 2.2.9	( SCGCQ00841735 ) 
 - Ventura Tiger: Poll for Remote SASCore Interrupt	( SCGCQ00843664 ) 
 - Release notes not needed. plSim is not released during a "standard" release.	( SCGCQ00843993 ) 
 - Ventura: PL to provide capability for MR FW to change the IO completion (ReplyDestination	( SCGCQ00846550 ) 
 - Ventura: SGPIO Double Pump Mode support	( SCGCQ00846941 ) 
 - Ventura: Remove Dauntless PCIe discovery implementation	( SCGCQ00848347 ) 
 - Turn on temperature monitoring for Cutlass Channel boards( SCGCQ00850747 ) 
 - Ventura: add some additional register dumping debug code	( SCGCQ00852294 ) 
 - Ventura: additional items for diag console debug dump commands( SCGCQ00852648 ) 
 - MPI 2.6: SRIOV support for PCIe devices( SCGCQ00852827 ) 
 - MPI 2.6: Update Flash Signature.	( SCGCQ00852831 ) 
 - MPI 2.5: Update Description of BiosOptions field in BIOS CONFIG PAGE 1( SCGCQ00853162 ) 
 - Ventura: Add APB SAS Slave registers to gSASCore memory map( SCGCQ00853334 ) 
 - Add support for GPIO Drive Activity LED (Wide Port Activity( SCGCQ00853683 ) 
 - ComboSerdes Wrapper EDS 2.3 Updates	( SCGCQ00854332 ) 
 - Ventura: Update interrupt table to EDS version 2.2.5	( SCGCQ00855344 ) 
 - Ventura: Modify Ventura code such that features that used to use config trapping use config writing mechanism( SCGCQ00855704 ) 
 - Ventura: Modify clock frequency dividers for bitstream 3.0 compatibility	( SCGCQ00856495 ) 
 - Ventura: Add the APB slave registers to the debug dump( SCGCQ00857054 ) 
 - Need spurious interrupt checks.( SCGCQ00860268 ) 
 - IOP: Eliminate reference to FW downgrade active bit from CFGI code( SCGCQ00861856 ) 
 - Ventura: Add support for PCIe devices using DDR in IT( SCGCQ00862509 ) 
 - Ventura: FPGA: 3.2 bitstreams changes( SCGCQ00865103 ) 
 - Ventura: backend PCIe: enable maximum PCIe device count in FPGA DDR build( SCGCQ00865951 ) 
 - Ventura: Use Host initiated IO Fast path flag bit to determine Frame Ownership( SCGCQ00866323 ) 
 - Handle PCIe MemRd, MemWr failures issued over Enterprise POB in Axi2Shell Bridge interrupt handler( SCGCQ00866777 ) 
 - VENTURA: Update SPI registers Vayu EDS 2.2.15( SCGCQ00867427 ) 
 - Intruder SR-IOV: Update NVData for optimal resource allocation( SCGCQ00867906 ) 
 - Intruder IOP: Compile out unnecessary SGL types from SysDMA( SCGCQ00870980 ) 
 - Enable DCR Macro in iopInitFastPathAccess( SCGCQ00871716 ) 
 - Enabled Avago SerDes debug functions	( SCGCQ00872114 ) 
 - Add SBR header information( SCGCQ00872116 ) 
 - Ventura: Update PortFacts reply for Port Type( SCGCQ00872264 ) 
 - Ventura: Update firmware signature per latest EDS( SCGCQ00872787 ) 
 - Ventura: backend PCIe: tweaks to TM and interlocks with other subsystems	( SCGCQ00874057 ) 
 - NVData: Create Intruder A1( SCGCQ00877621 ) 
 - IOP: Support Intruder A1	( SCGCQ00878608 ) 
 - IOP: Removed old code which is no longer used( SCGCQ00879395 ) 
 - Additions for Tiger/Styker build	( SCGCQ00880830 ) 
 - IOP: Configure additional compile options for Tiger support( SCGCQ00881793 ) 
 - Sync tigerbase.h up with ventbase.h	( SCGCQ00881832 ) 
 - TigerStryker: Add tigerfpga build and options to turn off PDB and turn on PSB support.( SCGCQ00881838 ) 
 - Ventura: backend PCIe: clean up some TODOs	( SCGCQ00881882 ) 
 - TigerStryker: Add new defines for PSB and PDB builds Part 2	( SCGCQ00883029 ) 
 - Ventura: backend PCIe: hard reset the PDB cores at PL init time	( SCGCQ00883464 ) 
 - Implement MPI 2.6 Active Cable Exception Event( SCGCQ00883606 ) 
 - MPI 2.6: Additional PCIe Enumeration Event EnumerationStatus bit	( SCGCQ00884740 ) 
 - BL: First pass of adding conditional compilation for MMU and MPU	( SCGCQ00885620 ) 
 - Update the DDR training burst mechanism.	( SCGCQ00886632 ) 
 - Ventura: control which NVMe SGL format to use.( SCGCQ00886974 ) 
 - Enable SIO/I2C Bus muxing based on the backplane sideband signals( SCGCQ00888047 ) 
 - Tiger: IOA Init( SCGCQ00888287 ) 
 - Tiger/Stryker: Separate PDB code into new define - part I( SCGCQ00888868 ) 
 - Ventura MSS: Ability to change MPR pattern used in training algorithms.( SCGCQ00888903 ) 
 - Ventura: Add IOA debug prints to some releases( SCGCQ00890390 ) 
 - Tiger/Stryker: Isolate PDB code from Tiger/Stryker builds Part II( SCGCQ00891905 ) 
 - Ventura - DDR Frequency Scaling - IOP Support( SCGCQ00892969 ) 
 - Ventuar - DDR Frequency scaling - During Initalization and run time.	( SCGCQ00892975 ) 
 - Ventura - DDR Frequency Scaling - Work on TODO items	( SCGCQ00892977 ) 
 - BL: Updates for Tiger to copy the firmware to the correct location( SCGCQ00895156 ) 
 - Ventura: backend PCIe: improve robustness of the INTx handler( SCGCQ00896564 ) 
 - Bootloader: Tiger/Stryker initial round of changes to get firmware booted on FPGA( SCGCQ00897171 ) 
 - Tiger IOP: Add support for the PBAM GPT hardware block( SCGCQ00898142 ) 
 - IOP: Update UART initialization code	( SCGCQ00900631 ) 
 - BL: Tiger: Allow firmware to run from a ram loaded location( SCGCQ00904576 ) 
 - Ventura: Additional MSIX combined mode changes( SCGCQ00905622 ) 
 - Remove Dauntless Defines: Makefiles and build scripts.( SCGCQ00905980 ) 
 - Remove Dauntless Defines: IOP code( SCGCQ00905981 ) 
 - Remove Dauntless Defines From MSS/DDR library( SCGCQ00905996 ) 
 - Remove support for Dauntless from hardware header files	( SCGCQ00905997 ) 
 - Removing DAUNTLESS specific functionality from SPI library( SCGCQ00906001 ) 
 - Remove Dauntless Defines: Remove Dauntless specific configuration from NVDATA files.	( SCGCQ00906003 ) 
 - Remove Dauntless Defines: Utilities	( SCGCQ00906005 ) 
 - IOP: Update register block for Tiger/Stryker	( SCGCQ00907735 ) 
 - IOP: Tiger: Move the firmware executable to run from 1K from the beginning of memory	( SCGCQ00908709 ) 
 - Allow Unique SAS address for Direct Attached Sata Devices( SCGCQ00908795 ) 
 - BL: Configure Tiger bootloader to copy firmware correctly( SCGCQ00910285 ) 
 - Tiger/Stryker: CSR Handler (Cfg Read and Writes( SCGCQ00910623 ) 
 - Ventura: Make Some Fault Codes Unique	( SCGCQ00910652 ) 
 - Ventura: Update coherent memory settings based upon default SBR settings	( SCGCQ00910690 ) 
 - Ventura: Provide an FPGA work-around to initialize the Expansion ROM Window ASAP	( SCGCQ00910692 ) 
 - IOP: Remove reference to MR Key	( SCGCQ00910882 ) 
 - Ventura: backend PCIe: remove stale early FPGA hacks	( SCGCQ00911513 ) 
 - IOP: Conditionally compile IOA RAM support( SCGCQ00912286 ) 
 - IOP: Add abstraction to PCI device ID code( SCGCQ00913490 ) 
 - IOP: Add GPT timer initialization routine( SCGCQ00915228 ) 
 - MPI 2.6: Update Ventura family device ids to match latest EDS( SCGCQ00915256 ) 
 - MPI 2.6: update Marlin-class device IDs( SCGCQ00915336 ) 
 - Ventura : MSS : DDR4 LRDIMM support : Configure LRDIMM specific MC registers	( SCGCQ00916707 ) 
 - Add support to check Chip reset enabled bit before deciding to perform actual offload( SCGCQ00917637 ) 
 - Initialize the Spico Interrupt Sequences and add an API to allow per-phy SAS/SATA TX EQ settings	( SCGCQ00917655 ) 
 - Ventura Build: Add a minimized build to the list of targets	( SCGCQ00917696 ) 
 - Update AAPL code to 2.2.3( SCGCQ00918244 ) 
 - Tiger/Stryker: MCPU Enumeration and Configuration of PEX ports and attached devices.	( SCGCQ00918258 ) 
 - Ventura: RMC misc changes to interrupts	( SCGCQ00918452 ) 
 - IOP: Update GPIO code for Tiger/Stryker	( SCGCQ00918494 ) 
 - Ventura: Map WidePort activity group to GPIO pins( SCGCQ00919252 ) 
 - Ventura: Add support for GPIO drive control and slew rate( SCGCQ00919263 ) 
 - IOP: Disable TPH errata workaround in Tiger and Stryker( SCGCQ00919279 ) 
 - Ventura: Remove SAS core SGPIO module support code	( SCGCQ00919473 ) 
 - Ventura A0: Add support for B0 HW CR46 - PBAM InFrame activity mapping logic changes for PDB and SAS cores( SCGCQ00919497 ) 
 - IOP: Remove unnecessary workaround code	( SCGCQ00921754 ) 
 - MPI 2.6: PCIe IO Unit Page 0 and 1 tweaks( SCGCQ00922213 ) 
 - Ventura: Remove VENTURA_PORTING from Makefiles and headers( SCGCQ00922883 ) 
 - Need C99 and CPP versions of the library for Ventura	( SCGCQ00922914 ) 
 - Download Guinness Serdes Spico firmware using the Sbus broadcast address	( SCGCQ00923584 ) 
 - Ventura: RMC update reset sequence( SCGCQ00923609 ) 
 - IOP: Add VIC Hardware files	( SCGCQ00924375 ) 
 - Update Ventura PL code for MPI/SED device enumeration( SCGCQ00924378 ) 
 - Ventura: Prepare For ARM DS-5 5.22 Update( SCGCQ00924431 ) 
 - NVMe SCSI Translation updates( SCGCQ00925607 ) 
 - PL: Ventura-Tiger: SED/Tiger Completion Q allocation	( SCGCQ00925758 ) 
 - Remove debug symbols from Ventura C99 library( SCGCQ00925770 ) 
 - MPI 2.6: Remove all SOP references( SCGCQ00925839 ) 
 - Ventura: backend PCIe: allow usage of 64 bit space for device BARs( SCGCQ00926634 ) 
 - IOP/PL: Use 128 byte reply message size	( SCGCQ00927749 ) 
 - IOP/PL: Update additional structures to use OCM PLB Segment 2( SCGCQ00927962 ) 
 - Ventura: Ensure uniqueness of PCI Bus Numbers for devices in the backend PCIe topology( SCGCQ00927968 ) 
 - IOP: Tiger remove support for CCI400 hardware( SCGCQ00928547 ) 
 - Ventura: Update Inquiry results for NVMe drives to be compliant with version 1.5 of the NVMe SCSI Translation Reference	( SCGCQ00928876 ) 
 - IOP: Tiger: Enable multi-host IOC mode( SCGCQ00928904 ) 
 - Implement Ventura A0 workarounds per HW team request.( SCGCQ00929743 ) 
 - Tiger/Stryker: Fix hard coded values in PSB's IOP SysDMA interface function( SCGCQ00932427 ) 
 - Tiger: Remove PCI_PSB from build and use IOP/PL defines( SCGCQ00932472 ) 
 - Ventura: backend PCIe: optimize firmware start path for encapsulated requests( SCGCQ00932934 ) 
 - Ventura: Create Silicon Build Scripts( SCGCQ00932981 ) 
 - Support the updated A0 pre-silicon Interrupt Sequences Spreadsheet( SCGCQ00932997 ) 
 - MSS library: Add 40-bit DDR support in SPD( SCGCQ00934415 ) 
 - Active cable Power management support for Intruder/Cutlass( SCGCQ00935460 ) 
 - Ventura: backend PCIe: handle max payload size mismatch	( SCGCQ00936258 ) 
 - Enable A0 Hardware Initialization( SCGCQ00936652 ) 
 - Ventura: backend PCIe: handle some additional FxCore exception mid type cases( SCGCQ00937444 ) 
 - PL: Remove old remote SED Driver code from PL( SCGCQ00937808 ) 
 - Venutra: Update SOC SBR settings to latest values( SCGCQ00937914 ) 
 - Remove leftover Dauntless code from SAS 3.5 firmware codebase( SCGCQ00938267 ) 
 - Ventura/Marlin: backend PCIe: resolve some TODOs	( SCGCQ00938516 ) 
 - Ventura: backend PCIe: add runtime control of PDB hardware workarounds( SCGCQ00938856 ) 
 - Implement Sbus Reset	( SCGCQ00938921 ) 
 - Tiger: MPT end point initialization and CSR FIFO Start of Day Setup( SCGCQ00940281 ) 
 - Removed internal CSW library functions that used run time library print formatting functions( SCGCQ00940315 ) 
 - Tiger: FPGA specific quirks and workarounds	( SCGCQ00941057 ) 
 - Remove receiver training, Enable receiver termination, Change TX Amplitude( SCGCQ00941130 ) 
 - PL: Ventura: Add processing of PCIe Topo Change List Add from downstream MPI devices	( SCGCQ00942302 ) 
 - Tiger: Add Version files for Tiger Firmware( SCGCQ00943012 ) 
 - Ventura: make CSW library build part of project build( SCGCQ00943199 ) 
 - Tiger: Added Release build job script( SCGCQ00944615 ) 
 - IOP: Implement the macros for enabling/disabling config space for Tiger( SCGCQ00944747 ) 
 - Tiger: Clear Inbound Msix Interrupt Mask	( SCGCQ00944844 ) 
 - Update Spico interrupt sequences and spico firmware( SCGCQ00944860 ) 
 - VENTURA: GPIO register update( SCGCQ00945612 ) 
 - Tiger: get PCI_DEVICE=0 build working( SCGCQ00945790 ) 
 - IOP: Add fault interrupt support	( SCGCQ00945948 ) 
 - IOP: Tiger: Get gIopBootParams.RtFeatures populated correctly( SCGCQ00945968 ) 
 - Ventura: backend PCIe: configure some link speed related settings in the DM Core	( SCGCQ00947271 ) 
 - MPI 2.6: Remove all AHCI references( SCGCQ00948258 ) 
 - Ventura: Update PCE SBR binary( SCGCQ00948439 ) 
 - Ventura: Revert to old method for FPE frame ownership change	( SCGCQ00948489 ) 
 - Ventura: Enable Support for Second UART	( SCGCQ00948864 ) 
 - MPI 2.6: Add support for SAS-4 and PCIe-4( SCGCQ00948955 ) 
 - Ventura: RMC A0 bring up changes	( SCGCQ00949117 ) 
 - MPI 2.6: Add Enclosure Level and Connector name to PCIe device page 0( SCGCQ00949638 ) 
 - Tiger: add Tiger unique NVDATA( SCGCQ00949784 ) 
 - Tiger: Add support for FIQ Event FIFO in Tiger( SCGCQ00949801 ) 
 - Ventura: backend PCIe: A0 bringup changes( SCGCQ00950032 ) 
 - BL: Tiger: Enable memory protection unit	( SCGCQ00950064 ) 
 - IOP: Fix general purpose timer prescalers for FPGA( SCGCQ00950194 ) 
 - Ventura: Add vtboot.rom to MegaRAID release package( SCGCQ00950517 ) 
 - Ventura: Update release scripts for current NVDATA file names and location( SCGCQ00950683 ) 
 - Ventura: Add Harpoon SBR to build process( SCGCQ00951155 ) 
 - Fix initial checks for feature registers on Crusader( SCGCQ00951163 ) 
 - Ventura: Add backtrace et al to ring buffer dump	( SCGCQ00951940 ) 
 - Ventura: Add all ASC/ASCQ's to scsi.h( SCGCQ00952486 ) 
 - Ventura: backend PCIe: NVMe submission queue timeout handling modification( SCGCQ00952601 ) 
 - Ventura: backend PCIe: configure PERST# GPIOs( SCGCQ00953712 ) 
 - Ventura: Add CSW register dump to cli( SCGCQ00953834 ) 
 - MPI 2.6: add LinkNum field to the PCIe Link configuration pages( SCGCQ00954619 ) 
 - Tiger: Implement workaround for spurious FxCore exception interrupt	( SCGCQ00954832 ) 
 - Create SBR and ROM images for Ventura ROC chip variant.( SCGCQ00958165 ) 
 - Ventura: Check SBR Load Status( SCGCQ00958167 ) 
 - Tiger: Handle POM errors	( SCGCQ00964901 ) 
 - Tiger: Implement DPC support	( SCGCQ00965091 ) 
 - Ventura: Add code to prevent PDB access if PDB PLL not locked( SCGCQ00966067 ) 
 - Ventura: Enable PIM2 (Expansion ROM	( SCGCQ00966590 ) 
 - Ventura: Add text to boot loader to verbosely explain PCE DeviceID Failures	( SCGCQ00968487 ) 
 - Ventura: backend PCIe: decrease verbosity of IEEE SGL to PRP translation debug prints( SCGCQ00968712 ) 
 - Ventura: Need support for both uniform and non-uniform Spansion parts( SCGCQ00970821 ) 
 - IOP Logic for updating the NVDATA Flags to indicate Current Active Cable Power Exception.( SCGCQ00981722 ) 
 - Add support for TomCat variant of Ventura chip.	( SCGCQ00982536 ) 
 - Modify Ventura makefile to suppress license expiration warning( SCGCQ00983360 ) 
 - Tiger: integrate using combo serdes wrapper library for SERDES init( SCGCQ00987114 ) 
 - Tiger: Add performance monitor support.( SCGCQ00987214 ) 
 - Ventura: Add CLI command to dump CCI-400 registers( SCGCQ00987455 ) 
 - Update Spico Firmware and remove the Tx Phase Slip workaround( SCGCQ00987750 ) 
 - Ventura: Firmware Download taking longer than necessary( SCGCQ00988341 ) 
 - MPI 2.5: Add additional EEDP Error Reporting capability to SCSI IO Reply	( SCGCQ00988360 ) 
 - Ventura: Verify that the alternate location for POM works during host boot( SCGCQ00988608 ) 
 - Tiger: Multiple host support for CSR	( SCGCQ00988657 ) 
 - Ventura: Port IO Unit Page 7 PCIe Link Speed & Width to Ventura( SCGCQ00991747 ) 
 - Tiger: Initial Veloce updates for Firmware( SCGCQ00991777 ) 
 - Ventura: Set SBR Link Control 2 Register to Gen2	( SCGCQ00993135 ) 
 - IOP: Map pcie core interrupts to appropriate handlers( SCGCQ00993753 ) 
 - Set TxAMP for SAS/SATA and PCIe in the CSW Interrupt sequences( SCGCQ00995431 ) 
 - MPI 2.5: Modify "SAS IO Unit Page 4" to add a new field "SATAHintingTimeout"	( SCGCQ00996127 ) 
 - Ventura A0: Add External Interrupt support for GPIO Bank B	( SCGCQ00997300 ) 
 - Ventura: Support for user configurable option to select the PBAM GPIO LED Data polarity( SCGCQ00997306 ) 
 - PL: Improve MPI IRQ handling and add SCSI IO support	( SCGCQ00999444 ) 
 - Ventura: Configure the PLLs on SBus ring	( SCGCQ00999504 ) 
 - Tiger: Rename iopCcrRegRead/Write( SCGCQ01000151 ) 
 - IOP: Improve usefulness of SCSI IO error trace print and accuracy of SCSI IO Error Reply	( SCGCQ01000640 ) 
 - Support for PCIe Dynamic Power Allocation in Ventura	( SCGCQ01001494 ) 
 - Tiger: Handle DMA failures during host port link down.( SCGCQ01002313 ) 
 - MPI 2.5: Add additional EEDP Error Reporting capability to SCSI IO Reply	( SCGCQ01002367 ) 
 - Ventura: Add host side spico revision to version output( SCGCQ01002441 ) 
 - Ventura: change RMC to use default values for PCE Hot Reset( SCGCQ01003264 ) 
 - IOP: Tiger: Add software emulated PCI configuration space registers( SCGCQ01003352 ) 
 - IOP: Implement Device Serial Number extended PCI capability( SCGCQ01003374 ) 
 - Ventura: Increase FIFO RAM max to 4096 entries( SCGCQ01004149 ) 
 - Ventura: Update XML Files to support automated SBR modification( SCGCQ01004323 ) 
 - Ventura: Create partial XML for 9400-16i (Bristol( SCGCQ01005098 ) 
 - Ventura: Port Capability to scan NVDATA for CHIPID when PCIID fails( SCGCQ01009099 ) 
 - MPI-2.6: backend PCIe feature initialization status reporting( SCGCQ01009104 ) 
 - PL: Use message frames as reply frames for MPI driver( SCGCQ01010464 ) 
 - Tiger Ventura: Store secondary SED MPT endpoint in upper half of MPI device array and populate FPE device state table for remote drives( SCGCQ01010549 ) 
 - Tiger: Intial setup of Messaging Unit Hardware to operate in Tiger mode( SCGCQ01011139 ) 
 - VENTURA: Update SPI library so it puts the SPI FLASH in the fastest mode available( SCGCQ01012095 ) 
 - Tiger: Add SED Init message( SCGCQ01012121 ) 
 - Ventura: Add initial support for Marlin, Mercator and Marut( SCGCQ01012455) 
 - Tiger FPGA: set CCR mode to Tiger mode instead of Styker	( SCGCQ01012471 ) 
 - MPI 2.6: add flag to force completion queue entry return for NVMe Encapsulated request( SCGCQ01013930 ) 
 - IOP: Tiger must use MSIx 1 for sending events( SCGCQ01014837 ) 
 - Ventura PL: Provide SED with DDR information from IOC( SCGCQ01015368 ) 
 - Tiger: Send FirstDevhandle in SED init message( SCGCQ01015370 ) 
 - MPI2.6: Fix defines that are not unique within the first 32 characters( SCGCQ01015826 ) 
 - MPI 2.6: direct reporting of negotiated PCIe link width and speed( SCGCQ01017027 ) 
 - MPI 2.6: Backend SRIS mode enable flag( SCGCQ01018687 ) 
 - Tiger Ventura - if Tiger or Ventura fault, ensure the other side is faulted as well.	( SCGCQ01019232 ) 
 - Ventura/Marlin: backend PCIe: Link number field in PCIe Link Page 3	( SCGCQ01019238 ) 
 - Ventura PL: Organize MPI SED initialization routines into their own file	( SCGCQ01020470 ) 
 - MPI2.6: Reserve ExtPageTypes for Dragon	( SCGCQ01020473 ) 
 - Tiger BL: Modify bootloader scatter file to use base address macro( SCGCQ01020741 ) 
 - Ventura: Enable Active cable Management support( SCGCQ01021229 ) 
 - Ventura: Add support to detect BAR sizes for PL Reservations	( SCGCQ01021598 ) 
 - Tiger PL SED: Initial Handling of Task Managements to an SED attached end device	( SCGCQ01023127 ) 
 - Ventura MSS: Collection of changes for A0 bring up( SCGCQ01023729 ) 
 - IOP: Add additional PCIe Page support to iop show cfg( SCGCQ01023855 ) 
 - Update Spico firmware to version 0x085e and utilize the new DFE reset mechanism( SCGCQ01024059 ) 
 - Aero: initial makefile changes( SCGCQ01024834 ) 
 - Tiger IOP: Various hacks to get the second path to work	( SCGCQ01025622 ) 
 - Ventura A0: Update IOC Page 8 to enable Enclosure Slot mapping( SCGCQ01027212 ) 
 - FPGA: full ring buffer is dumped to UART on FPGA builds( SCGCQ01027917 ) 
 - VENTURA: SPI library quad mode nvsram( SCGCQ01027928 ) 
 - Ventura PL: Configure MPI SED Driver to use different sized queues( SCGCQ01028106 ) 
 - Added offset to Trace Buffer Print( SCGCQ01028857 ) 
 - Spico firmware 005F and Receiver Calibration fixes( SCGCQ01028936 ) 
 - Tiger BL: Enable instruction cache in the R4	( SCGCQ01029656 ) 
 - Ventura Tiger: Report Tiger attached SATA devices as SATA devices in Ventura.( SCGCQ01031015 ) 
 - Ventura IOP+PL: Add support for MPI Passthrough request and reply( SCGCQ01032692 ) 
 - IOP: Remove usages of PL_FEATURE_PCI_DEVICE_SUPPORT from IOP	( SCGCQ01032806 ) 
 - Ventura: changed PCIe Hot reset handling	( SCGCQ01034959 ) 
 - PL: Add configuration page handling for SED attached PCIe devices( SCGCQ01035127 ) 
 - Tiger FPGA: Fault if IOC Init request received on non zero IOC( SCGCQ01035215 ) 
 - Ventura PL: Convert Expander and Switch DevHandles in Topology Change List Events( SCGCQ01035243 ) 
 - IOP: Disable SED support compile option in Ventura by default( SCGCQ01036856 ) 
 - NVData: Update Tiger NVData to reduce the number of DevHandles allocated	( SCGCQ01037219 ) 
 - Add SRIS support	( SCGCQ01043121 ) 
 - IOP: Change location of FlashLayout in IOP_MEM_PARAMS( SCGCQ01043978 ) 
 - Ventura Corrective Actions for Board Over Temperature Conditions	( SCGCQ01044068 ) 
 - Update ComboSerdes library to Spico firmware 0E5F( SCGCQ01045799 ) 
 - Ventura: Dover NVDATA for 8e (9400-8e( SCGCQ01048676 ) 
 - PL: Configure PCIe switch BARs( SCGCQ01049391 ) 
 - CSW: Modify exit bypass sequence to fix PCI detectio	( SCGCQ01050553 ) 
 - Ventura: SPI Library - support Micron flash MT25QU128 1.8V 64 KB sector( SCGCQ01052708 ) 
 - Ventura: RMC enhanced interrupt handling for adapter reset	( SCGCQ01053436 ) 
 - PL: Add support for memory translation in SAS Core( SCGCQ01058395 ) 
 - Tiger IOP: Add code to translate SGLs targeting the SED hosts' internal memory( SCGCQ01059930 ) 
 - Ventura MSS: Improve write performance with ECC enabled( SCGCQ01060884 ) 
 - ComboSerdes: Removed unimplemented routines	( SCGCQ01062229 ) 
 - Load SerDes Spico processors in parallel	( SCGCQ01062231 ) 
 - Tiger: Cleanup code in iopGPIO.c	( SCGCQ01062237 ) 
 - Ventura: Add device side SPICO FW version to pliShowVersion(	( SCGCQ01062566 ) 
 - MPI2.6: Add x16 PCI support for Marlin family products( SCGCQ01063009 ) 
 - Ventura MSS: Method to artificially delay clock when the clock trace is not sufficiently longer than the strobe trace( SCGCQ01063021 ) 
 - Ventura: Create PLI compliant method for PL to check debug print mask( SCGCQ01063057 ) 
 - Integrate MPI2.6 headers 2.00.44	( SCGCQ01063292 ) 
 - Tiger: Get Tiger to compile with PL_FEATURE_CSW_LIB enabled	( SCGCQ01063627 ) 
 - ComboSerdes: Support a number of Sbus Rings that is different from the number of CSW blocks( SCGCQ01065677 ) 
 - Tiger: removed unused code in IOP_FEATURE_SED_SUPPORT_DEVTEST_TEMP( SCGCQ01065701 ) 
 - PL: Support Translation of Additional Log Pages( SCGCQ01067698 ) 
 - Ventura IOP : Support Dual Rank DDR4	( SCGCQ01068988 ) 
 - ComboSerdes: SAS/SATA TXEQ Settings Adjusted	( SCGCQ01071317 ) 
 - ComboSerdes: Untrained Receiver DFE Settings Updated	( SCGCQ01071320 ) 
 - Ventura: Delete AHCI code from codebase	( SCGCQ01071349 ) 
 - MPI2.6: Fix PCI device page enclosure level/connector name to match SAS device page( SCGCQ01071374 ) 
 - Ventura: Update coherency settings to match hardware team's settings	( SCGCQ01073946 ) 
 - Tiger A0: PCIe Link Configuration Setup	( SCGCQ01076376 ) 
 - Tiger IOP: Allow writes to PCI Express Device Status and Control register to update hardware	( SCGCQ01076761 ) 
 - Makefile cleanup for SCSI over PCIe (SOP	( SCGCQ01080155 ) 
 - Aero: more build changes	( SCGCQ01080681 ) 
 - Add debug information to ring buffer when PLLs fail to lock	( SCGCQ01083258 ) 
 - Ventura: backend PCIe: enable PDB PLL SSC( SCGCQ01083690 ) 
 - Ventura: Move GPIO LED Data Mux source selection configuration from IOP to PL	( SCGCQ01083822 ) 
 - ComboSerdes: Updated 3/6/12 G SAS Optical TX Equalization	( SCGCQ01084938 ) 
 - MPI 2.5: Add new connector types	( SCGCQ01085073 ) 
 - Marlin: Update CCR header file to the latest spec( SCGCQ01086086 ) 
 - Tiger: Implement A PCIe Backend Function to Check if the Root Complex is Enabled	( SCGCQ01087447 ) 
 - ComboSerdes: Guinness CSW B0 Support	( SCGCQ01087482 ) 
 - Ventura: RMC AVSO changes	( SCGCQ01091723 ) 
 - Ventura: backend PCIe: enable/disable new FxCore features at runtime	( SCGCQ01092303 ) 
 - MPI 2.6: Modify "SAS IO Unit Page 11" to add a new field "SATAHintingTimeout"( SCGCQ01092340 ) 
 - Update Spico firmware on host side to 0x1060.( SCGCQ01092343 ) 
 - Ventura: Add capability to handle interrupts during firmware download( SCGCQ01092407 ) 
 - Ventura: Modify MCTP to SysDMA interface for discovery so that the data comes out with the correctly	( SCGCQ01092412 ) 
 - Aero: modifications to compiler optimizations( SCGCQ01092420 ) 
 - ComboSerdesLib Update default ARM tools to DS-5 Version 5.24	( SCGCQ01093491 ) 
 - ComboSerdes: Enable SASCLK for all phys on Tiger	( SCGCQ01095102 ) 
 - Aero: Update miniDMA library for new compiler( SCGCQ01095725 ) 
 - Modify IT Boot loader to support MegaRaid Flash Regions	( SCGCQ01099725 ) 
 - Ventura MSS: Change Marlin compile option to run time option	( SCGCQ01099799 ) 
 - Ventura: fix comment in assembly file( SCGCQ01099871 ) 
 - Remove IR source code( SCGCQ01107754 ) 
 - Ventura/Marlin: backend PCIe: rearrange PDB medium priority interrupt handlers( SCGCQ01110330 ) 
 - ComboSerdes: update Aero Makefile to include new compile options	( SCGCQ01113261 ) 
 - Aero: more makefile changes	( SCGCQ01113981 ) 
 - Ventura A0: Allow ISTWI controller to core mapping to 1:1( SCGCQ01115202 ) 
 - Aero: Add support for ARM GIC 500( SCGCQ01116603 ) 
 - Aero: add device support for Aero( SCGCQ01116610 ) 
 - Ventura B0: Update RMC PCE Hot Reset sequence to use Chip Reset instead of the workaround for A0 that used SysLite Reset instead.( SCGCQ01117310 ) 
 - IOP: Remove VENTURA_PORTING from IOP code (misc, msg and pwrmgmt	( SCGCQ01123894 ) 
 - Aero: create aero base address map( SCGCQ01123955 ) 
 - Ventura: IOP Workaround and PCE Chip Revision Changes for B.0( SCGCQ01123969 ) 
 - Ventura: add Link field to the PCIe Link configuration pages (part 1	( SCGCQ01124182 ) 
 - ComboSerdes: Configure OOB SAS/SATA TXEQ	( SCGCQ01125424 ) 
 - IOP: MCTP I2C interrupt config and structure alignment improvements( SCGCQ01125427 ) 
 - IOP: MCTP over I2C transmit buffer alignment correction	( SCGCQ01127461 ) 
 - Ventura/Marlin: backend PCIe: support for SRIS enable in PCIe IO Unit page 1 phy data( SCGCQ01130582 ) 
 - Make: Modify compiler, assembler, and linker options to ensure proper alignment	( SCGCQ01131963 ) 
 - BUILD: Modify compiler, assembler, and linker options to ensure proper alignment on Ventura( SCGCQ01132205 ) 
 - Ventura: Disable NVMe in default NVDATA	( SCGCQ01132935 ) 
 - NVMe: handful of changes for NVMe SGL support( SCGCQ01134129 ) 
 - MPI2.6: Added new image type and flash region definitions( SCGCQ01136127 ) 
 - Ventura: SPI library: Add support to Macronix Flash 128Mb MX25U12835FXDI	( SCGCQ01136315 ) 
 - ComboSerdes: Update SasPhyPRegs.h for SAS4( SCGCQ01141006 ) 
 - pl: backend PCIe: add compile option for hot reset on PCIe link up( SCGCQ01141218 ) 
 - MPI 2.6: Add new clean tool options( SCGCQ01141732 ) 
 - Ventura: Update MST with current MST info on timer error completions to IOP	( SCGCQ01141751 ) 
 - Ventura: Add fault for unexpected CSW error interrupts( SCGCQ01143296 ) 
 - Enable interface function to dump SD Channel error interrupt info( SCGCQ01143336 ) 
 - Ventura: Add customer-specific partial NVDATA( SCGCQ01144968 ) 
 - MPI 2.6: Add two new reason codes to Active Cable Exception Event Data( SCGCQ01146583 ) 
 - Ventura: SPI library: support FLash Macronix 256Mb 1.8v MX25U25635FXDI-10G( SCGCQ01149975 ) 
 - pl: NVMe: additional encapsulated request error reporting( SCGCQ01150880 ) 
 - Host DPA power state change requests tied to controller's power mode change handlers	( SCGCQ01151427 ) 
 - Configure unique receiver DFE settings for 3Gbps SAS/SATA( SCGCQ01158802 ) 
 - Add board name to (iop show ver( SCGCQ01161686 ) 
 - IOP: MCTP: Add MCTP status CLI command( SCGCQ01162907 ) 
 - Update Man page 41 with TxEq values provided by Systems Engineering.	( SCGCQ01164684 ) 
 - ComboSerdes: Update TX EQ Settings Per SCGCQ01164659	( SCGCQ01164711 ) 
 - ventura/Marlin: Port firmware signing firmware from Gen3	( SCGCQ01165402 ) 
 - Ventura: Rename Obsolete Resources In Mfg. Page 9 - XSD Files( SCGCQ01167302 ) 
 - Ventura B0: backend PCIe: enable NVMe completion starvation prevention	( SCGCQ01169187 ) 
 - Ventura: Auto backplane type detection and configuration support	( SCGCQ01172310 ) 
 - Ventura/Marlin: backend PCIe: handle switch attached hot add max payload size mismatch( SCGCQ01172361 ) 
 - IOP: Doxygenate IOP Fault codes and prepare Error Code Guide document( SCGCQ01177469 ) 
 - MPI 2.5 and 2.6: Need IT FW to send new event for expander failing SMP( SCGCQ01180886 ) 
 - PLI/DOC: Update Doxygen to 1.8.12( SCGCQ01181315 ) 
 - Ventura: Create utility to modify package version and package name( SCGCQ01188381 ) 
 - Ventura: SPI library: Reduce SPI flash write time in manual mode for performance	( SCGCQ01194973 ) 
 - Ventura: On firmware download compare new SBR with old SBR and notify host if there is a change( SCGCQ01194989 ) 
 - Utility: Update MemCfg utility( SCGCQ01207514 ) 
 - MPI 2.5: Add two new reason codes to Active Cable Exception Event Data( SCGCQ01208954 ) 
 - Ventura/Marlin: backend PCIe: allow user to disable ECRC for testing	( SCGCQ01209929 ) 
 - Update TxEQ settings	( SCGCQ01212690 ) 
 - Update TxEQ settings	( SCGCQ01212712 ) 
 - CSW: Ventura jitter changes	( SCGCQ01212870 ) 
 - MPI 2.5 : Add support for reporting Chassis Slot to Enclosure Page 0	( SCGCQ01213028 ) 
 - MPI2.6: Mfg7 support for arbitrary starting slot number	( SCGCQ01213267 ) 
 - Ventura: Print decimal versions( SCGCQ01217493 ) 
 - Documentation: Update PLI and Error documents with feedback from the technical publications team	( SCGCQ01223765 ) 
 - Ventura B0: Create doxygen support framework for VSES documentation	( SCGCQ01225423 ) 
 - New set of serdes settings( SCGCQ01229302 ) 
 - Ventura: Move firmware update copy process to main firmware to avoid PCE problems( SCGCQ01230723 ) 
 - Ventura B0: Update VSES Specification document.( SCGCQ01235306 ) 
 - Ventura/Marlin: When the SPICO code fails checksum, Patch SPICO Signature and Checksum( SCGCQ01240422 ) 
 - Updated CSW library	( SCGCQ01242238 ) 
 - OEM NVMe backplane detection, PCIe Reset and LED management over I2C	( SCGCQ01253925 ) 
 - Ventura: Add capability to firmware download to update CBB BACKUP( SCGCQ01257997 ) 
 - MPI 2.6: Add new firmware download type (CBB BACKUP( SCGCQ01258005 ) 
 - Ventura: Implement the remaining bits in the Clean Tool( SCGCQ01258007 ) 
 - IOP: Simplified NVData and Package version print on UART output	( SCGCQ01258333 ) 
 - Marlin RMC: Adjust AVSO programming algorithm with values provided by hw team( SCGCQ01260474 ) 
 - Updated Marlin B0 SATA Rx EQ Values( SCGCQ01261262 ) 
 - Ventura/Marlin: allow IOP to direct PL to not allocate secondary CPU queues( SCGCQ01263302 ) 
 - pl: NVMe: new alignment requirement for NVMe SGLs( SCGCQ01272065 ) 
 - Ventura: Validate PortSelected field passed to snooping config function( SCGCQ01273125 ) 
 - MPI 2.6: Device side PCIe SRNS flag	( SCGCQ01276256 ) 
 - Ventura/Marlin: backend PCIe: NVMe core exception and completion queue handler optimization( SCGCQ01281240 ) 
 - Ventura: Defeature using Man page 12 slot info option( SCGCQ01282530 ) 
 - MCTP over PCIe Access Control( SCGCQ01283644 ) 
 - Add ability to field upgrade CPLD on HBA boards( SCGCQ01283645 ) 
 - Ventura/Marlin: Modify CFGI to allow migrations if there is only a minor revision change	( SCGCQ01287390 ) 
 - Aligned NVDATA and Package version UART prints.( SCGCQ01289012 ) 
 - Enabled SAS protocols with SSC( SCGCQ01293498 ) 
 - MPI 2.6: Add new firmware download type (CPLD IMAGE( SCGCQ01305760 ) 
 - NVDATA: Update configuration files( SCGCQ01319710 ) 
 - Ventura signed firmware support for PKCS7 certificate digest	( SCGCQ01320684 ) 
 - SGPIO: Assign group ID to the sgpio backplane connectors that did not report bays presence( SCGCQ01327271 ) 
 - Ventura: Enclosure Mgmt optimizations and enhancements( SCGCQ01328437 ) 
 - Ventura: Add TM IOCStatus to TM Logger( SCGCQ01336984 ) 
 - Enhancement to SPI Library error reporting( SCGCQ01346552 ) 
 - Ventura: Add support for OEM specific NVMe backplane detection and slot LED control	( SCGCQ01346574 ) 
 - Adding support for SEP reset by controller FW at start of day through CPERST# signal	( SCGCQ01353161 ) 
 - Added support for Bios signing and ported signtool to Windows( SCGCQ01354846 ) 
 - Warning removal 167	( SCGCQ01365168 ) 
 - Warning removal 550	( SCGCQ01365173 ) 
 - Warning removal 676	( SCGCQ01365174 ) 
 - MPI 2.6: Add Aero PCI Device IDs	( SCGCQ01373008 ) 
 - Enable I2C polling for drive presence detection in VPP Type B backplanes with NVMe support.( SCGCQ01375330 ) 
 - Ventura: Print NVMe Status Code Fields to ring buffer( SCGCQ01377133 ) 
 - pl: NVMe: dump request message and SGL on device IO failure( SCGCQ01377671 ) 
 - Enable WB mode for JBOD EPD( SCGCQ01378163 ) 
 - pl: backend PCIe: add ECRC error status	( SCGCQ01378999 ) 
 - OEM backp lane bring up on MR( SCGCQ01379829 ) 
 - Ventura 7.4 - All R/W IO's on EPD LD's need to be forced to DCDB IO Path in FW( SCGCQ01380047 ) 
 - Track Cmd Block Initiate TM when FP io or FW io outstanding.	( SCGCQ01389571 ) 
 - Task Management Changes, Bug Fixes On Unit Testing While Holding IOs in PL.( SCGCQ01392378 ) 
 - Add SPI library debug capabilities( SCGCQ01392854 ) 
 - Reduce the Number of Characters Logged into TTY During Error Handling( SCGCQ01397783 ) 
 - Add sbus read/write access functions to CLI( SCGCQ01403424 ) 
 - Enhance MR non-Critical frame mgmt to support LUN Reset in PL( SCGCQ01406415 ) 
 - Ventura B0:(UBM	( SCGCQ01412194 ) 
 - Enable I2C polling for drive presence detection in UBM backplanes with NVMe support.	( SCGCQ01412198 ) 
 - Controlling Slot Locate/Fault LEDs in a backplane which implements UBM.( SCGCQ01412209 ) 
 -	( SCGCQ01412644 ) 
 - MPI 2.6: Add new reason code to PCIE Device Status Change Event( SCGCQ01416515 ) 
 - SPILib: Prevent firmware downgrade if older version does not support SPI flash being used.( SCGCQ01417738 ) 
 -	( SCGCQ01419081 ) 
 - pl: NVMe: NVMe task management modifications	( SCGCQ01419083 ) 
 - MR 7.5 - Add 0x15(21	( SCGCQ01425122 ) 
 - Replace POM0 usage with SysDma	( SCGCQ01430023 ) 
 - Ventura: NVMe 1.3 Support: Firmware Update Granularity( SCGCQ01430672 ) 
 - Ventura: NVMe 1.3 Support: Namespace Optimal IO Boundary	( SCGCQ01430674 ) 
 - pl: NVMe: IO breakup structure modification( SCGCQ01431067 ) 
 - Ventura: NVME 1.3 Support: Add new Status Codes to header files( SCGCQ01434061 ) 
 - Add Test Link Diagnostic API	( SCGCQ01436268 ) 
 - pl: NVMe: don't require a resource frame for some SCSI-NVMe translations	( SCGCQ01436612 ) 
 - Add NVRAM_INTERCORE_REQUEST_INFO_REQUEST_SKIP_WAIT to API( SCGCQ01437234 ) 
 - Provide OEMs ability to select either I2C or PCIe as an out of band transport( SCGCQ01445045 ) 
 - Add a new structure to provide OEMs ability to switch to select either I2C or PCIe as an out of band transport( SCGCQ01445048 ) 
 - Enable FlowControl using XON/XOFF( SCGCQ01445058 ) 
 - PL: Add firmware support for depopulation of SATA drives	( SCGCQ01445877 ) 
 - (SATA Only( SCGCQ01448576 ) 
 - MPI 2.6: PCIe Device Page 2 reporting Namespace Optimal IO Boundary(NOIOB( SCGCQ01449138 ) 
 - Provide OEMs ability to select either I2C or PCIe as an out of band transport( SCGCQ01450390 ) 
 - New: Ventura LD de-allocation support on SAS/SATA SSDs through UNMAP/WRITE SAME on non-PARITY, non-DIF volumes( SCGCQ01451570 ) 
 - Ventura: Re-order pl dbg to put most useful, less verbose prints first( SCGCQ01454612 ) 
 - UART command to enable switching the NVMe clocking mode( SCGCQ01455706 ) 
 - PL: Use Sense Data from SATA Log Page 10 when querying Log Page 10( SCGCQ01459375 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.250.00.00 MR PL-SCS Libs( SCGCQ01459394 ) 
 - Added MPI2_MR_PARAMS_PAGE_0.OOBMaxPacketSize	( SCGCQ01460789 ) 
 - Ventura: Change iopiDiagCmdReadMem( SCGCQ01462690 ) 
 - New feature to disable JBOD through NVDATA change if requested by customer( SCGCQ01463522 ) 
 - Ventura: Modify plDiagCmdShowRegister( SCGCQ01464914 ) 
 - pl: backend PCIe: reduce firmware initiated PCIe transaction wait time( SCGCQ01465016 ) 
 - Update description of MR_DCMD_CTRL_PERSONALITY_SET Dcmd( SCGCQ01467149 ) 
 - Reading UNMAP support value through NVDATA( SCGCQ01472058 ) 
 - Low lotency path cleanup	( SCGCQ01481026 ) 
 - Improve SCons dependency tools( SCGCQ01496996 ) 
 - Resetting discovered flag when prepare for endpoint discovery control command.( SCGCQ01506822 ) 
 -	( SCGCQ01518586 ) 
 - Disable deallocation support in Ventura 7.5	( SCGCQ01531388 ) 
 - FBU345 should show as CVPM05	( SCGCQ01558893 ) 
 - Provide print in termlog that shows which I2C address is used for the LED signaling of NVMe drives( SCGCQ01559697 ) 
 - BIOS Handshake breaks Manufacturing Environment, need change in TTY and/or add timeout in FW for BIOS Handshake( SCGCQ01575182 ) 
 - 7.5 R1 performance change request.( SCGCQ01614688 ) 
 - Add support in FW for new LL hung connection timer/controls in HW( SCGCQ00105465 ) 
 - (IOP-Only	( SCGCQ00125129 ) 
 - Gen 3: update MPI v2.5 header files( SCGCQ00128142 ) 
 - New L3 cache hardware header file( SCGCQ00129841 ) 
 - MPI2: add optional vendor-unique region to MPI2_SCSI_IO_REQUEST structure( SCGCQ00132183 ) 
 - TBM: Incorporate a FW header in the Extended Buffer for the parser( SCGCQ00132403 ) 
 - (IOP-Only( SCGCQ00132479 ) 
 - Thunderbolt: The uart clock has been changed in B0( SCGCQ00132858 ) 
 - Firmware build needs to link pre-built PL library, instead of compiling it with the rest of firmware	( SCGCQ00134475 ) 
 - Gen3 PwrMgmt: Extend Thunderbolt's "half speed mode" with support for "quarter speed mode" and "eighth speed mode"( SCGCQ00135539 ) 
 - Gen3 PwrMgmt: Add "Presence Detect" capability for direct-attached phys	( SCGCQ00135543 ) 
 - PL: review usage of TxDmaStart Busy( SCGCQ00135548 ) 
 - MPI2 - additional IR status information( SCGCQ00136201 ) 
 - Gen3 PwrMgmt: Add PL support for TxDMA, RxDMA, RxEEDP light sleep/deep sleep/shutdown modes( SCGCQ00136933 ) 
 - (IOP-Only( SCGCQ00137508 ) 
 - (IOP-Only( SCGCQ00140387 ) 
 - Gen3 Manufacturing Config Pages 11,30 and 31( SCGCQ00141619 ) 
 - Gen3: Bringup PBAM Flash	( SCGCQ00141693 ) 
 - PL must start/stop timers for IOs if IOP is using Cuda Timing Wheel and PL starts IO directly to colt( SCGCQ00141735 ) 
 - Update project to the Phase 7 MPI Header Files( SCGCQ00141743 ) 
 - (IOP-Only( SCGCQ00144016 ) 
 - Dev Test: TLR jammer scripts check in( SCGCQ00144391 ) 
 - Add PLI control request for PauseHostRequest Cuda bit on/off	( SCGCQ00144626 ) 
 - FPE: Upgrade the FPE Init process to initailize Detroit memory more elegantly( SCGCQ00145070 ) 
 - Gen3 PowerMgmt: Gen3-ize PCIe Link Speed & Width Change Code	( SCGCQ00146799 ) 
 - Update RMTFLASH for GEN-3 Invader( SCGCQ00146810 ) 
 - CFGI: add support for MFG Pages 30 and 31( SCGCQ00146854 ) 
 - (IOP	( SCGCQ00147874 ) 
 - Update PLI to allow passing of VF Request Q sizes( SCGCQ00148029 ) 
 - Update iopiMemoryMove Function for Gen3	( SCGCQ00148770 ) 
 - TBM: Update ForceFlush handling	( SCGCQ00149047 ) 
 - FPE: Add PLI contreq function to support "Route All To Exceptoin Queues" bit in FPE Control reg( SCGCQ00149686 ) 
 - pl: Allow sense data for ATAPI device to go to other address space than just pci	( SCGCQ00150256 ) 
 - FPE: Firmware changes for Detroit 1.2 EDS release( SCGCQ00150513 ) 
 - FPE: Dev Test Customization( SCGCQ00151752 ) 
 - Gen3: PL Light( SCGCQ00152450 ) 
 - Control Q disabling needs to pause Cuda as well( SCGCQ00152670 ) 
 - Gen3 IR - Data Scrub Duration Update	( SCGCQ00154735 ) 
 - Gen3: Support FPE NVDATA changes	( SCGCQ00155854 ) 
 - Change the mid validation code in PL to filter out mid 1 as well	( SCGCQ00156042 ) 
 - pl: make sure TM and hw clean up code doesn't use mid 1( SCGCQ00156442 ) 
 - FPE - prevent auto reenable of FP on TM completion.( SCGCQ00156594 ) 
 - (IOP-Only( SCGCQ00157015 ) 
 - MPI2: MFG 7 update: method to link ISTWI devices, GPIO, PHYs of a SAS connector( SCGCQ00159010 ) 
 - MPI 2.5: Obsolete MPI2_RAID_VOL_CREATION_BACKGROUND_INIT	( SCGCQ00159395 ) 
 - Update MemCfg utility for SAS3FW compatability( SCGCQ00160081 ) 
 - FPE: add pli control requests to adjust the cuda auto trace levels( SCGCQ00160522 ) 
 - Explicitly set the Flags field in IR’s calls to iopiMemoryMove( SCGCQ00162573 ) 
 - MPI2: reserve some FWDownload ImageType values for product-specific use( SCGCQ00162597 ) 
 - Third set of DDR3 changes for Elektra/Invader( SCGCQ00162738 ) 
 - Performance counters - add FW counters similar to FPE and make them all visible to host via MPI config page( SCGCQ00163008 ) 
 - Remove PBSRAM support( SCGCQ00163164 ) 
 - Implement TCM for Invader( SCGCQ00163173 ) 
 - Enable L1/L2 data caching for Invader FPGA( SCGCQ00163174 ) 
 - Bring up I2C support on Invader	( SCGCQ00163177 ) 
 - MPI 2.5: review SGE Flags for Local bit and Data Location Address Space changes( SCGCQ00164407 ) 
 - First set of Cobra specific DDR3 library changes	( SCGCQ00168783 ) 
 - Update TM code to comply with new cuda pend list cleanup	( SCGCQ00168994 ) 
 - Add print out of the Abort list for a TM when it causes a fault.	( SCGCQ00170549 ) 
 - NVDATA defaults update for FPGA and A0 Silicon( SCGCQ00172450 ) 
 - Changes to DDR3 builds( SCGCQ00172764 ) 
 - Detroithw.h changes to support Detroit EDS 1.35( SCGCQ00173443 ) 
 - update the xsd file for the palladium build( SCGCQ00173631 ) 
 - Changes to DDR3 library to support linking with SAS3 controller firmware	( SCGCQ00175235 ) 
 - Report to host the offset of first EEDP error( SCGCQ00175700 ) 
 - Update chip feature identification firmware for Invader controller family( SCGCQ00178655 ) 
 - FPE: Investigate optimizing FPE invalid descriptor handling( SCGCQ00180215 ) 
 - Define LTRACE registers( SCGCQ00181694 ) 
 - Create NVData files for Fury	( SCGCQ00181723 ) 
 - More NVDATA mfg cfg pg 2 updates for Invader eval board( SCGCQ00186027 ) 
 - Update CreateScripts.cmd for Invader Silicon	( SCGCQ00186459 ) 
 - update so pl release includes both the current DEBUG library and also a nonDEBUG library	( SCGCQ00188811 ) 
 - Update UART clock macro definitions	( SCGCQ00192541 ) 
 - Ethernet: Update driver for efficiency, change EthHal structure for debug( SCGCQ00194441 ) 
 - ONFI: Prepare for HW automated memory offload( SCGCQ00194676 ) 
 - ONFI: Issue MAP Commands	( SCGCQ00194679 ) 
 - Gen3: Implement Xmodem Interface	( SCGCQ00205236 ) 
 - Increase the frequency of the SHELL clocks from 250 MHz to 500 MHz( SCGCQ00207056 ) 
 - Create a processor monitor for tracking of processor time allocation	( SCGCQ00207617 ) 
 - Porting up Gen2 changes from Phase 11 for ISTWI and Enclosure Management CSETs( SCGCQ00208724 ) 
 - TxCtxMgr Interrupt handling cleanup( SCGCQ00209353 ) 
 - ONFI: Updates to the MAP Commands( SCGCQ00209886 ) 
 - Gen3: FW updates for FPGA to work with latest bitstreams.( SCGCQ00213008 ) 
 - Update SnC Method (08/16/2011 3:54 PM( SCGCQ00213372 ) 
 - Gen3: Update LTRACE dump format	( SCGCQ00217177 ) 
 - TxFM and CtrlQ code cleanup and debug improvements( SCGCQ00222848 ) 
 - Invader A0: Target Mode print optimization( SCGCQ00223545 ) 
 - Update TLBs to reflect Memory Coherency bit( SCGCQ00224498 ) 
 - Active cable support part one( SCGCQ00225179 ) 
 - Active cable support part two( SCGCQ00226322 ) 
 - Update GPIO NVData to Support 40 Entries	( SCGCQ00226718 ) 
 - MPI 2.5: IR - new Raid Action to enable the Fast Path( SCGCQ00227491 ) 
 - Update TM Hw context memory structure for gen3	( SCGCQ00227727 ) 
 - Add header file with memport #defines, to be included in common header files of binary DDR3lib releases( SCGCQ00229363 ) 
 - Customer requests common SAS3 header files to also include SAS2 only information	( SCGCQ00229951 ) 
 - Snapshot buffer updates for Gen3	( SCGCQ00231500 ) 
 - Change L3 and TLB setup to be compliant with DDR3 API document recommendations( SCGCQ00231516 ) 
 - Invader: Update lwIP to latest version( SCGCQ00237898 ) 
 - Gen3 IR - Enable PI support in NVDATA( SCGCQ00242621 ) 
 - BT 1629 WA implemenation	( SCGCQ00244096 ) 
 - Bring GEN-3 I2C support up to parity with GEN-2( SCGCQ00246028 ) 
 - Implement UART cmd to fault controller( SCGCQ00246669 ) 
 - IOP: Add Invader B0 SBR structure( SCGCQ00246851 ) 
 - MPI2: Update Hard Reset Algorithm with new timings( SCGCQ00250721 ) 
 - ONFI: Add 2 new interface APIs to access the DCR registers( SCGCQ00250934 ) 
 - Update builds to include B0 NVData( SCGCQ00254773 ) 
 - MPI2: Reserve Product Specific range for Event codes	( SCGCQ00258327 ) 
 - (IOP	( SCGCQ00259801 ) 
 - PL: Implement a vendor specific PLI control request( SCGCQ00269392 ) 
 - NVData updates for B0 SBR settings	( SCGCQ00280170 ) 
 - ONFI: Support physical addresses for DDR location to be offloaded( SCGCQ00291330 ) 
 - New API in ONFI Library to periodically callback during restore operation to update the progress	( SCGCQ00300692 ) 
 - Update Cli Toolbox Diag command handling per MPI 2.5 Rev E	( SCGCQ00308513 ) 
 - pl pci: Enumeration and Configuration	( SCGCQ00308793 ) 
 - PCIe interrupt (INTx, MSI/MSI-x	( SCGCQ00308797 ) 
 - MPI 2.5: obsolete the Clear SATA Affiliation bit in SAS IO Unit Page 1( SCGCQ00310439 ) 
 - Remove modification of CTRL_RAW parameter inside ddr3 library interrupt handler API	( SCGCQ00313866 ) 
 - (NVDATA	( SCGCQ00316358 ) 
 - Enable all fatal L2 error interrupts	( SCGCQ00328716 ) 
 - Added a PLI Control Request Operation To Get Count of Known EDFB (DataBolt( SCGCQ00333765 ) 
 - Hardware changes from Invader for Boot	( SCGCQ00338455 ) 
 - NVMe Mode Sense and Mode Select translations	( SCGCQ00338540 ) 
 - Various NVMe related changes	( SCGCQ00341755 ) 
 - (FPGA( SCGCQ00362502 ) 
 - Distribution of PCI space obtained from the host amongst PDB PIM windows.( SCGCQ00362905 ) 
 - Backend PCIe device memory allocation (part 1	( SCGCQ00365971 ) 
 - Support for new config pages PCIe IO Unit Page0,1, PCIe device pages 0,1 described in MPI 2.6 specification( SCGCQ00377454 ) 
 - (PL-IOA	( SCGCQ00377476 ) 
 - NVMe firmware-only mode( SCGCQ00378032 ) 
 - USB : [invader]1813 - CDC Issues in USB Atlantic Controller( SCGCQ00381371 ) 
 - (IOP	( SCGCQ00386217 ) 
 - Use dedicated Stang NVMe chain area	( SCGCQ00391063 ) 
 - Update Silverhawk and Prevail PIM/POM settings to support Subtractive routing( SCGCQ00394770 ) 
 - Added handlers for PCIe errors( SCGCQ00400046 ) 
 - Add PCIe Link config pages to read and configure PCIe link error and event counters	( SCGCQ00400394 ) 
 - Dauntless: Implement PLI control request for MR to set snoop regions in stang and PDB.( SCGCQ00412920 ) 
 - Add SOP and PQI header files	( SCGCQ00423525 ) 
 - MPI 2.5: obsolete SAS IO Unit Control _TRANSMIT_PORT_SELECT_SIGNAL( SCGCQ00438437 ) 
 - SOP Initialization( SCGCQ00442840 ) 
 - Add support for PCIe prefetchable memory BARs( SCGCQ00449047 ) 
 - NVMe: FxCore IoError handling( SCGCQ00461439 ) 
 - SAS3.5 ARM Port - Add automated MMU Region Mapping Capability( SCGCQ00483912 ) 
 - Print additionl information on PCIe Error Messages and Fault on unhandled PCIe errors( SCGCQ00487994 ) 
 - Update TCC to version 0.9.26	( SCGCQ00492508 ) 
 - Cleanup the TxDMA dual context and DMA groups code based on new HW functionality in Intruder SAScore	( SCGCQ00496009 ) 
 - (IOP-Only( SCGCQ00498642 ) 
 - Allocate from IOA Local RAM( SCGCQ00521570 ) 
 - Ventura: GIC - Generic Interrupt Controller	( SCGCQ00521685 ) 
 - Ventura: Create HW header file describing CCN-505 Configuration Registers( SCGCQ00521690 ) 
 - Ventura: IOA – Impala IO Accelerator Cuda Block Bring Up	( SCGCQ00522530 ) 
 - Ventura: Create C header files for CIB (Core Interface Blocks( SCGCQ00572483 ) 
 - (VENTURA BUILD( SCGCQ00599359 ) 
 - Ventura: Port power-on self-test (POST, BL( SCGCQ00599962 ) 
 - Ventura: Parent ER - Port misc processor features for ARM( SCGCQ00600384 ) 
 - Ventura: Port PPC FAULT routines to ARM	( SCGCQ00606223 ) 
 - Ventura: MSS - FPGA DDR functional( SCGCQ00606278 ) 
 - Enterprise preparation: root complex organization( SCGCQ00613905 ) 
 - Rename all instances of IRQ_SAS interrupts to IRQ_SAS0( SCGCQ00614956 ) 
 - Ventura: Create fast POST memory routines using Neon similar to ARM memcpy( SCGCQ00622834 ) 
 - PL support for multiple SAS cores during initialization	( SCGCQ00623972 ) 
 - Modify PLI interface to take SasCoreNum parameter( SCGCQ00630403 ) 
 -	( SCGCQ00633869 ) 
 - Ventura: NVMe: update device information after a Format Unit	( SCGCQ00639223 ) 
 - Ventura: SerDes header file changes	( SCGCQ00643953 ) 
 - Ventura: IOA NVME SOP Hang Detection (CR-18	( SCGCQ00647800 ) 
 - Modify the xsd files to limit the SAS Phys to two for Intruder FPGA and Include/exclude appropriate config pages to it.( SCGCQ00648191 ) 
 - Add build option for customer specific PL Library build	( SCGCQ00658152 ) 
 - Ventura: SPI library update to SPI Flash access in Ventura( SCGCQ00664307 ) 
 - Intruder: Register dump of all SAS Cores	( SCGCQ00665865 ) 
 - Ventura: Backend PCI - generate PCI reset from TM( SCGCQ00674370 ) 
 - Ventura: Enable DCR access macros for ARM( SCGCQ00682711 ) 
 - Add multiple SAS core support for Diag Snapshot feature( SCGCQ00684391 ) 
 - Intruder FPGA: use 2MB of L3 cache as OCM( SCGCQ00685184 ) 
 - Migrate GHS toolchain to version 6.1.4( SCGCQ00685242 ) 
 - Review Intruder EDS v1.9 for CCR changes that apply to FW( SCGCQ00689788 ) 
 - Ventura: backend PCIe: link to root complex mapping	( SCGCQ00692020 ) 
 - Ventura: Implement new PCIe Discovery SM	( SCGCQ00694262 ) 
 - Intruder: Manufacturing Page 11 NVDATA changes for BoardPowerRequirement Setting( SCGCQ00700740 ) 
 - VENTURA: Port I2C Support in Ventura	( SCGCQ00701754 ) 
 - Intruder SBR update	( SCGCQ00712527 ) 
 - Add Multi SAS Core support to initiator added functionaility	( SCGCQ00713914 ) 
 - Ventura: Add support for PCIe devices using DDR in IT	( SCGCQ00717115 ) 
 - Ventura: Enable the IOA interrupts( SCGCQ00718616 ) 
 - PL: cleanup of #if INVADER( SCGCQ00728717 ) 
 - Ventura: Create CCI-400 Header File( SCGCQ00731687 ) 
 - Ventura: Enterprise: update headers for new EDS( SCGCQ00756824 ) 
 - Ventura: Add Loose Alignment and Lock/Unlock to SPI library( SCGCQ00757681 ) 
 - Ventura: Implement Build Optimizations Recommended by ARM( SCGCQ00759482 ) 
 - Ventura: Assembly Language Upgrades Recommended by ARM( SCGCQ00759486 ) 
 - Ventura: Update and/or Port Misc ARM C Functions and Macros( SCGCQ00759728 ) 
 - Ventura: Verify and/or Fix Various Decriptor Settings( SCGCQ00759734 ) 
 - Migrate DDR3 intruder library to new set of tools( SCGCQ00768996 ) 
 - Ventura: Add restart capability to PCIe discovery( SCGCQ00771838 ) 
 - Ventura: Implement PCIe Discovery Event Replay( SCGCQ00771839 ) 
 - Ventura: enable CCI performance monitor( SCGCQ00771904 ) 
 - Ventura: enable Shell performance monitor( SCGCQ00771905 ) 
 - Ventura: Add FPGA Script Support for DS-5 5.19( SCGCQ00777865 ) 
 - Ventura: Program SPI FLASH using manual mode commands( SCGCQ00780123 ) 
 - Ventura: Remove PL private files from the IT build( SCGCQ00785195 ) 
 - Backend PCIe: remove 'pl pci cap' console command( SCGCQ00786396 ) 
 - Ventura: Add support for sas2parser 10.00.00.00( SCGCQ00786411 ) 
 - Ventura: MSS - SPD Data Function for FPGA( SCGCQ00787495 ) 
 - VENTURA: Update CLI commands for SPI module debug and test( SCGCQ00791903 ) 
 - Ventura: Modify code for compatibility with Silverhawk core( SCGCQ00796039 ) 
 - Improve the PL_ASSERT macro usage.( SCGCQ00804858 ) 
 - Intruder: New Config Pages for ISTWI Controller and Device Information( SCGCQ00806204 ) 
 - Ventura: RMC boot code and makefiles	( SCGCQ00810261 ) 
 - Ventura: Update code to compiler 5.0.5( SCGCQ00813831 ) 
 - Add 3DS capability( SCGCQ00814795 ) 
 - Ventura: MSS - DDR4 Miscellaneous Support( SCGCQ00814869 ) 
 - Intruder: update Product ID in build process	( SCGCQ00814928 ) 
 - Ventura: Update FMU Queue Initialization	( SCGCQ00820941 ) 
 - Ventura MSS - Move from MC eval mode algorithms to phy eval mode algorithms( SCGCQ00827542 ) 
 - Cleanup of PLI I/F PIM/POM struct members( SCGCQ00828947 ) 
 - Ventura SW A/R: AER interrupt handling for Switch topology (ER( SCGCQ00830951 ) 
 - Updates to PLI_RUNTIME_CONFIG( SCGCQ00831058 ) 
 - Add NumberOfSEDs and NumberofSEDMids to mfg page 9( SCGCQ00831065 ) 
 - Marlin: Host Side x16 Support( SCGCQ00832634 ) 
 - Intruder A0: Set SYS PLL Frequency to 1200 MHz( SCGCQ00841118 ) 
 - Ventura FPGA: increase max number of PCIe devices to 16 in NVDATA( SCGCQ00848369 ) 
 - Ventura: backend PCIe: hide backend PCIe devices from virtual functions (part 1	( SCGCQ00854613 ) 
 - Ventura MSS: Add MemPort header file to list of files distributed with the library( SCGCQ00855676 ) 
 - Code changes to get PCI hot reset working( SCGCQ00857498 ) 
 - Ventura: Add MSS MemPort (MegaTron( SCGCQ00861719 ) 
 - IOP: Move CFGI library related files to config directory	( SCGCQ00861886 ) 
 - Ventura: Add support for handling AXI interrupts in SAS Core	( SCGCQ00862457 ) 
 - Ventura: Prepare Ventura build for predicted SBR and Firmware Size( SCGCQ00865228 ) 
 - MPI 2.6: add new feature to control NVMe SGL format( SCGCQ00872169 ) 
 - Update the ComboSerdes Library to AAPL 2.2.1	( SCGCQ00877408 ) 
 - IOP: Hardware Workaround Cleanup for Intruder( SCGCQ00879206 ) 
 - Ventura: backend PCIe: clean up some TODOs (part 2( SCGCQ00884601 ) 
 - Tiger/Stryker: Add new buildtype for Liger(SE( SCGCQ00890386 ) 
 - Tiger: Update bootloader for the CPU used by Tiger( SCGCQ00892724 ) 
 - Ventuara - DDR Frequecy scaling - Debug Support( SCGCQ00892976 ) 
 - Ventura: SPI library integration update to common shared library	( SCGCQ00893546 ) 
 - Tiger: Various tweaks to allow FPE usage on FPGA	( SCGCQ00894300 ) 
 - Enabled SASSDChannel Interrupts( SCGCQ00894717 ) 
 - IOP: Update PBAM offsets with Tiger/Stryker configuration( SCGCQ00897540 ) 
 - IOP: Update Tiger base addresses	( SCGCQ00904515 ) 
 - Ventura: Update firmware to the latest revision of NVMe SCSI Translation Reference( SCGCQ00905171 ) 
 - Remove Dauntless specific code from CFGI library	( SCGCQ00905992 ) 
 - Remove Dauntless platform specific code from Common Boot Block( SCGCQ00906013 ) 
 - Ventura: Add ocmscrub and remote flash binaries for test debug( SCGCQ00907908 ) 
 - Tiger/Stryker: CSR init	( SCGCQ00907988 ) 
 - Change Ventura build to create C++ library	( SCGCQ00909441 ) 
 - RMC error handling	( SCGCQ00910403 ) 
 - Rename iopiAvSerdes interface functions	( SCGCQ00910409 ) 
 - Build: Add Tiger/Stryker to build all script	( SCGCQ00910768 ) 
 - Ventura: add support for RMC watchdog( SCGCQ00910935 ) 
 - Add API for Protocol Mode Activation	( SCGCQ00911444 ) 
 - Ventura: Change SPI Internal structure to only contain internal information( SCGCQ00913596 ) 
 - BL: Update static extended image copy for Tiger	( SCGCQ00913638 ) 
 - Ventura B0: backend PCIe: changes for IOA stall prevention	( SCGCQ00914682 ) 
 - Ventura: add PCE Hardware Settings for SBR	( SCGCQ00914684 ) 
 - Ventura : MSS : LRDIMM Support : Training between DB and DRAM( SCGCQ00916711 ) 
 - Configure SAS 12G TxEq REF1, REF2 and NO-REF presets	( SCGCQ00918245 ) 
 - Tiger IOP: Handle clearing stale doorbell interrupt to support CLI Toolbox during fault( SCGCQ00918496 ) 
 - Ventura: Remove VENTURA_PORTING from ARM Initialization/Utilities.( SCGCQ00922893 ) 
 - IOP: Tiger/Stryker update to core enable function( SCGCQ00924365 ) 
 - Ventura: Update man pages 40 and 41 for first silicon( SCGCQ00925691 ) 
 - Ventura: backend PCIe: link down handling tweaks	( SCGCQ00925766 ) 
 - Tiger: Create psbmaverick.h Header File	( SCGCQ00926714 ) 
 - Create Tiger version of library	( SCGCQ00928530 ) 
 - IOP: Tiger: Update VIC Initialization( SCGCQ00928561 ) 
 - IOP: Tiger: Update time since start of day function	( SCGCQ00928566 ) 
 - Update miniDMA to work on Ventura.( SCGCQ00929185 ) 
 - IOP: Correct flash address( SCGCQ00932293 ) 
 - IOP: Tiger: Add Vector Table Support	( SCGCQ00932576 ) 
 - PL: Remove remote SAS core management( SCGCQ00938440 ) 
 - Ventura: Update NVDATA For Ventura Eval Board( SCGCQ00938441 ) 
 - Tiger FPGA: Add support to change FPGA bitstream from Base Mode to Tigermode during IT boot( SCGCQ00938845 ) 
 - Tiger: Implement Doorbell Interrupt routing	( SCGCQ00938853 ) 
 - Tiger: Update SIL on POM access.	( SCGCQ00939588 ) 
 - Tiger: Mpt endpoint PCIe config space read support( SCGCQ00940364 ) 
 - IOP: Tiger: Add periodic timer facilities( SCGCQ00940951 ) 
 - Tiger BL: Boot from Flash( SCGCQ00941578 ) 
 - Create separate header file for Tiger CCR register definitions( SCGCQ00944146 ) 
 - Tiger: add base nvdata files for Tiger( SCGCQ00947169 ) 
 - Warm Start Library Initialization Routings Added	( SCGCQ00951537 ) 
 - Tiger FPGA: removed reg write that isn't needed for FPGA	( SCGCQ00953320 ) 
 - Ventura: Add support to recognize harpoon storage processor with encryption( SCGCQ00953322 ) 
 - Create SBR and ROM image for Crusader.( SCGCQ00953723 ) 
 - VENTURA: Add support for additional SPI FLASH devices( SCGCQ00954923 ) 
 - Ventura: Add command to dump the SBR section of SPI flash( SCGCQ00963071 ) 
 - Ventura: Add CLI command to erase entire SPI flash( SCGCQ00979701 ) 
 - Ventura: Move location for rmtf.rom build in build all( SCGCQ00990538 ) 
 - Add JTAG Chip ID values for the AAPL library and SerDes tools( SCGCQ00993666 ) 
 - Ventura: Enable FW control of ConfigValid( SCGCQ00993797 ) 
 - Ventura: Update NVDATA Mfg. Page 9 Resources	( SCGCQ00994872 ) 
 - PL (Ventura( SCGCQ00997085 ) 
 - Tiger PL & IOP: First round of implementing SAS core memory translation	( SCGCQ01000544 ) 
 - Tiger: Implement firmware controlled PCIe message transmission on downstream ports.( SCGCQ01002884 ) 
 - Tiger: Implement firmware controlled PCIe memory TLP transmission on downstream ports.( SCGCQ01002890 ) 
 - Ventura Tiger support added to configure hardware to send IO to Tiger device	( SCGCQ01006667 ) 
 - Ventura: Add GLOBAL_MAX_CMD_CNT register to SHELL2AceLite header file( SCGCQ01007230 ) 
 - Ventura: Add Marlin images to IT release	( SCGCQ01012534 ) 
 - Tiger Ventura: handle IO replies from MPI device for IOs not started by FW path	( SCGCQ01012812 ) 
 - Tiger IOP: Configure messaging unit to send replies on same path as the data	( SCGCQ01019713 ) 
 - Ventura: Create initial partial for 9400-8i (Bristol TomCat( SCGCQ01020130 ) 
 - Ventura: Disable LR_SM prints by default	( SCGCQ01021261 ) 
 - Ventura: Update host side spico image( SCGCQ01024210 ) 
 - Aero: Add support for Clang (ARM V8( SCGCQ01025199 ) 
 - Ventura: Add additional PCE DBI Write Entries in SBR( SCGCQ01026165 ) 
 - Ventura Tiger: Implement internal Target Reset Task Management	( SCGCQ01027918 ) 
 - Tiger: Create SED product specific files	( SCGCQ01031950 ) 
 - Ventura MSS: DDR performance	( SCGCQ01031986 ) 
 - Create NVDATA for Dover (Crusader( SCGCQ01033595 ) 
 - Utilize both MC VREF ranges during initial and optimization of VREF values.( SCGCQ01034231 ) 
 - CSW: Update ComboSerdes library to use Spico FW 0C5F	( SCGCQ01038376 ) 
 - Ventura/Marlin: backend PCIe: allow assignment of additional memory space to backend PCIe devices( SCGCQ01040918 ) 
 - Ventura IOP : DDR4 Memory test feature	( SCGCQ01045575 ) 
 - Switch DS-5 scripts to use SR-IOV build path	( SCGCQ01045807 ) 
 - ComboSerdes: Updated Spico firmware to 1060 with corresponding interrupt sequences( SCGCQ01060045 ) 
 - ComboSerdes: Optimize code and data size	( SCGCQ01062234 ) 
 - Ventura: Defeature Ethernet in Present Build	( SCGCQ01066278 ) 
 - Ventura: Adapter Reset Workaround( SCGCQ01068990 ) 
 - Add SMID to frame state changed print, cleanup and consolidate args	( SCGCQ01071340 ) 
 - SCSI over PCIe (SOP	( SCGCQ01071351 ) 
 - ComboSerdes: Support Tiger Guinness CSW configurations( SCGCQ01083269 ) 
 - Ventura: Update default ARM tools to DS-5 Version 5.24( SCGCQ01083946 ) 
 - Enabled Accelerator Coherency Port( SCGCQ01086077 ) 
 - Aero: FPGA boot changes( SCGCQ01091721 ) 
 - Aero: changes to get PL to compile with clang( SCGCQ01094536 ) 
 - IOP: Initialize new fields in IOCFacts to 0( SCGCQ01095744 ) 
 - Comboserdes: Merge SAS3.5 and SAS4 CSW Support	( SCGCQ01105966 ) 
 - Backend PCIe: add some additional registers to a backend PCIe related header file( SCGCQ01107259 ) 
 - Ventura: Delete USB Library Code	( SCGCQ01107413 ) 
 - IT: backend PCIe: optimize toplevel PCIe-related interrupt handler( SCGCQ01107419 ) 
 - ComboSerdes: Update InterruptSequence RAM for SAS4( SCGCQ01107835 ) 
 - ComboSerdes: Update makefiles for Ventura/Aero( SCGCQ01110268 ) 
 - PL: Add doxygen comments to PLI and IOPI header files( SCGCQ01110308 ) 
 - Ventura: Add B0 Pl recognition( SCGCQ01112241 ) 
 - MPI 2.6: Add Sea Arch class and Product IDs( SCGCQ01116837 ) 
 - ComboSerdes: Changes for Aero Build( SCGCQ01116882 ) 
 - Aero: change Inline macro for ARM assembly( SCGCQ01118720 ) 
 - Ventura: Remove VENTURA_PORTING from IOP code (config, debug, flash and ethernet	( SCGCQ01123887 ) 
 - IOP: Remove VENTURA_PORTING from IOP code (init, startup, regions and sched	( SCGCQ01123893 ) 
 - Ventura MSS: interface changes( SCGCQ01123939 ) 
 - Ventura: SPI library: Add support to ISSI flash IS25WP128-RHLE 1.8v( SCGCQ01124637 ) 
 - Ventura: Report PCIe init status in IOC Exceptions( SCGCQ01130590 ) 
 - PLI: Finish doxygen comments to pliDefs.h( SCGCQ01132411 ) 
 - PLI: Add pli documentation to source control	( SCGCQ01134379 ) 
 - Ventura: Need to support erase functionality for MR Ventura cards in IT Bootloader( SCGCQ01140418 ) 
 - Ventura: Rename Obsolete Resources In Mfg. Page 9( SCGCQ01157973 ) 
 - Ventura: Add NVDATA for Customer HBA	( SCGCQ01165398 ) 
 - IOP and PL: Doxygen style comments to LogInfo header files( SCGCQ01167347 ) 
 - Ventura: Validate incoming SBR clock settings and Supported Devices before committing new firmware to flash( SCGCQ01173951 ) 
 - PL Doc: Correct Doxygen LaTeX output automatically( SCGCQ01183642 ) 
 - Ventura: Port NVDUMP utility to SAS 3.5	( SCGCQ01186238 ) 
 - Ventura: SPI library: Update SPI lock and unlock routines to match new SPI library version( SCGCQ01189014 ) 
 - Support VPP backplane LED management for NVMe x4 device Slots( SCGCQ01206050 ) 
 - Marlin/Mercator - Add B.0 Support for Mercator in the IOP( SCGCQ01229986 ) 
 - Update SAS serdes settings( SCGCQ01230719 ) 
 - Enable FLR as a product feature( SCGCQ01243549 ) 
 - Ventura/Marlin: backend PCIe: aggressively retry unreliable DA links during discovery( SCGCQ01264003 ) 
 - pl: NVMe: support for devices with large sector sizes( SCGCQ01275066 ) 
 - Ventura : Host Task management support( SCGCQ01300444 ) 
 - JBOD_Personality : Personality Management changes for Ventura( SCGCQ01301498 ) 
 - Implement aviSerdesGenericGetLibVersion( SCGCQ01305549 ) 
 - Enable Direct Attached Persistent Connections by default	( SCGCQ01306906 ) 
 - Add fault if device side spico fails to load	( SCGCQ01326658 ) 
 - PL: Additional debugging functionality( SCGCQ01328439 ) 
 - MPI 2.6: add NVMe SGL Data Block descriptor alignment flag( SCGCQ01339864 ) 
 - Reduced amount of data in pl dbg trace output( SCGCQ01394882 ) 
 -	( SCGCQ01402213 ) 
 - Enable support for isWBSupported API change in Firmware( SCGCQ01405382 ) 
 - To read the port Capabilities from backplane implementing UBM and to validate backplane configuration( SCGCQ01412195 ) 
 - MPI 2.6: Add ControllerResetTO to PCIe Device Page 2	( SCGCQ01416498 ) 
 - Ventura : HOST TM - Part II	( SCGCQ01436260 ) 
 - Enable using FIFOs in the UART HW( SCGCQ01439292 ) 
 - pl: NVMe: SGL translation performance tweaks	( SCGCQ01440247 ) 
 - Reduce time taken by host to initialize one SATA drive.	( SCGCQ01448575 ) 
 - Ventura/Marlin: Add support for Winbond 256Mbit SPI FLASH( SCGCQ01449325 ) 
 - PSOD with FW update using MCTP (iMR	( SCGCQ01451811 ) 
 - Cleanup MR FW log( SCGCQ01459401 ) 
 - PL: Add NVDATA option to gracefully handle invalid BP Type configurations( SCGCQ01464951 ) 
 - Skipping additional reserved registers when printing pl dbg trace( SCGCQ01468138 ) 
 - PL: Add Code to Correctly Determine Mid for Rx Context Non-automated Interrupts	( SCGCQ01472512 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.25.02.00 MR PL-SCS Libs( SCGCQ01481215 ) 
 - pl: NVMe: add debug print to the NVMe encapsulated failure path	( SCGCQ01487366 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.25.04.00 MR PL-SCS Libs( SCGCQ01498150 ) 
 - Remove deallocation support from Ventura 7.5	( SCGCQ01512568 ) 
 - SAS2FW: Need method to set Sentinel Interrupt Coalescing values( SCGCQ00034638 ) 
 - (IOP-ONLY( SCGCQ00113636 ) 
 - Gen 3: method to enable/disable FastPath capability on a per-device basis	( SCGCQ00116336 ) 
 - Port Layer error handling - cleanup/improve/optimize	( SCGCQ00126458 ) 
 - Gen3: TBM - Handle Trace Error	( SCGCQ00127747 ) 
 - Add handlign for new TxFM interrupt	( SCGCQ00129375 ) 
 - Update miniDMA code	( SCGCQ00129843 ) 
 - Gen3: add optional vendor-unique region to MPI25_SCSI_IO_REQUEST structure( SCGCQ00136677 ) 
 - Gen3 PwrMgmt: Integrate individual power management components into chip-wide power modes( SCGCQ00136952 ) 
 - MPI2: add PCI Device ID for Warhawk	( SCGCQ00137514 ) 
 - MPI2: add alternative defines for SGE Direction bit( SCGCQ00138259 ) 
 - MPI2: modify Host Based Discovery Action Request	( SCGCQ00140397 ) 
 - Add some FPGA workarounds currently needed to FPGA build	( SCGCQ00142976 ) 
 - Update Console Manager( SCGCQ00144056 ) 
 - Convert the SAS IOUnit control request for enable/disable of fast path to use PLI control request when going from IOP to PL( SCGCQ00145206 ) 
 - auto dump ring buffer to UART on fault( SCGCQ00148406 ) 
 - Invader Bootloader Updates( SCGCQ00149362 ) 
 - update cfgi_gnu.mak file to use latest MULTI	( SCGCQ00149386 ) 
 - (FPGA-Only( SCGCQ00149394 ) 
 - Update miscellaneous assembly language functions in crt0	( SCGCQ00153825 ) 
 - MPI 2.5: update PCI Device Ids for Invader / Fury( SCGCQ00155192 ) 
 - FPE - Unconfirmed Response Frame Handling( SCGCQ00155475 ) 
 - Add PCIe configuration space BIOS BAR (PIM2	( SCGCQ00156048 ) 
 - Add handling to various interrupts generated by the context non auto bit being set during task management.( SCGCQ00157017 ) 
 - FPE: Cuda Pend Queue Cleanup during TM( SCGCQ00160611 ) 
 - FPE: add some more debug to Requestor and Completor error/faults	( SCGCQ00163734 ) 
 - Modify DDR3 library to accommodate Cobra's 16bit data width.	( SCGCQ00168260 ) 
 - Turn on LL parity checking( SCGCQ00170270 ) 
 - Additional Invader IOP changes for DDR3( SCGCQ00170395 ) 
 - (Invader	( SCGCQ00170554 ) 
 - Add PCIE diagnostic commands to the console	( SCGCQ00171772 ) 
 - Update init image linker directive file for silicon	( SCGCQ00182266 ) 
 - nvdata update for invader A0	( SCGCQ00186498 ) 
 - Gen3: support SAS Notify Power Failure Expected (EPOW( SCGCQ00186531 ) 
 - Enable MSI-X multiple reply queues( SCGCQ00188933 ) 
 - Enable GPIO for Heartbeat and Link/Act lights( SCGCQ00189458 ) 
 - Clean up PPC476 header file( SCGCQ00194793 ) 
 - CLI menus should be dynamically spaced( SCGCQ00205520 ) 
 - Reduce nvdata settings needed to enable DDR	( SCGCQ00206430 ) 
 - Gen3 IR - Optimize SCSI Synchronize Cache command time intervals for reasonable overhead reduction.( SCGCQ00207726 ) 
 - Update IOP workaround code for B0 FPGA and silicon( SCGCQ00209592 ) 
 - ONFI: Fixes to ONFI code and enable ONFI interrupt( SCGCQ00213355 ) 
 - Customer requests header file changes( SCGCQ00217024 ) 
 - Add firmware support for SAS3004A0-1 and SAS3008A0-2	( SCGCQ00217468 ) 
 - PerfMon: L2/L3 Performance Monitoring( SCGCQ00223242 ) 
 - ONFI: Add UART commands for testing offload and restore	( SCGCQ00227317 ) 
 - Invader: Update DCR access functions to use indexed DCR instructions	( SCGCQ00234936 ) 
 - Add Ping utility to diag console	( SCGCQ00247670 ) 
 - add new iop onfi diag cmds for new onfi mirroring API functionality( SCGCQ00255174 ) 
 - (HW	( SCGCQ00260415 ) 
 - IOP Disable the idle interrupt( SCGCQ00286327 ) 
 - Merge header files to prevent overlap of definitions amongst WD, SBA and IR	( SCGCQ00295234 ) 
 - Changed SBR data so PCIe configuration data shows that the ASPM feature is not supported.( SCGCQ00307953 ) 
 - NVMe device asynchronous event handling( SCGCQ00334789 ) 
 - Add 4MB OCM support to FPGA	( SCGCQ00343319 ) 
 - (IOA	( SCGCQ00343530 ) 
 - Added new registers for new hardware	( SCGCQ00348166 ) 
 - (IOP	( SCGCQ00357214 ) 
 - Added code to dump IOA registers	( SCGCQ00383645 ) 
 - Enable Development Vehicle FPGA to use regular DDR3 library code path( SCGCQ00385238 ) 
 - More NVMe related changes( SCGCQ00390988 ) 
 - Add vendor unique DRAM device support( SCGCQ00391873 ) 
 - Backend PCIe: Allow de-configure and reconfigure of device memory chunk( SCGCQ00397609 ) 
 - Queue full handling for NVMe admin queue	( SCGCQ00399212 ) 
 - Tool change only, no change to FW( SCGCQ00400045 ) 
 - NVMe: Command timing during NVMe init( SCGCQ00417756 ) 
 - NVMe: command level error handling( SCGCQ00440187 ) 
 - NVMe: Native SGL validation mode	( SCGCQ00459734 ) 
 - More SOP IU Error handling( SCGCQ00464488 ) 
 - Dauntless SPI Flash Support	( SCGCQ00481295 ) 
 - ARM Port Build Options 2 - libraries, backtrace et al( SCGCQ00492621 ) 
 - Ventura: ARM M0+ RMC Image Support( SCGCQ00521623 ) 
 - Updated FxCore blocks to match new hardware( SCGCQ00522531 ) 
 - NVMe: task management, part 2( SCGCQ00525641 ) 
 - Enterprise: error message counter configuration( SCGCQ00552431 ) 
 - NVMe: Update translations to the latest version( SCGCQ00562270 ) 
 - PL: Add reserved U16 to PLI_RUNTIME_CONFIG( SCGCQ00609767 ) 
 - Intruder: update IOP Chip Feature list( SCGCQ00618689 ) 
 - clean out old IOP workaround that are no longer needed( SCGCQ00620254 ) 
 - Intruder: update CCR registers( SCGCQ00620515 ) 
 - Intruder FPGA updates for release 0.6 bitstream( SCGCQ00627879 ) 
 - Disable SAS1 interrupts in FW for 0.7 FPGA bitstream	( SCGCQ00632007 ) 
 - Updated header files for hardware names( SCGCQ00637211 ) 
 - Create suitable conversion functions between chipRelativePhyNum , coreRelativePhyNum and SasCoreNum	( SCGCQ00641789 ) 
 - Intruder: modify SAS Core base address and size, and update FW effective address map	( SCGCQ00661523 ) 
 - Backend PCI: add compile option for MSI(x( SCGCQ00668595 ) 
 - Intruder: Update plRemoveDevice to work with multiple SAS cores( SCGCQ00669830 ) 
 - Ventura: SPI library changes for integration with Methrat( SCGCQ00680520 ) 
 - Intruder: Update FPE completor error handling to support multicore( SCGCQ00684383 ) 
 - Intruder: Update the TLB entry for PCE Decode 3 - MU Registers( SCGCQ00686770 ) 
 - Ventura: backend PCIe: revise devhandle macros( SCGCQ00690231 ) 
 - Fix access to initiator table for Target Mode( SCGCQ00716824 ) 
 - Cleanup of #if INVADER	( SCGCQ00728719 ) 
 - Ventura: PL Dual/Multiple CPU Queue Task Management Support	( SCGCQ00754472 ) 
 - Ventura: Initial Cache Snooping Settings	( SCGCQ00759738 ) 
 - Ventura: Create Official MR Build Release Scripts( SCGCQ00760495 ) 
 - Ventura: Enterprise: return unique status for CRS on config space access	( SCGCQ00761092 ) 
 - Ventura: Add support for PCIe Topo Change List Event PORT_CHANGED status	( SCGCQ00771836 ) 
 - pl: AHCI: add check for 64 bit addressing support	( SCGCQ00776856 ) 
 - Ventura: Update ARM DS-5 to version 5.19.1( SCGCQ00778839 ) 
 - SAS3.5 iopBootLoader.c needs to be updated with Intruder values	( SCGCQ00807720 ) 
 - Remove Manufacturing Page 8 Definitions	( SCGCQ00814364 ) 
 - Implement memory burst mechanism for Ventura MSS	( SCGCQ00814469 ) 
 - Ventura: MSS - Write per-bit deskew training algorithm	( SCGCQ00814801 ) 
 - Aladin Core: Support Fast Trace Data Collection via UART	( SCGCQ00816086 ) 
 - SAS3.5 Create Flash Scripts for Cutlass	( SCGCQ00819460 ) 
 - Tiger: Update num of Phys per chip usage to account for remote SEDs - Part 1	( SCGCQ00823845 ) 
 - Integrate Guinness CSW Hardware Include Files( SCGCQ00827425 ) 
 - IOP: Add support for fan controllers over I2C( SCGCQ00833807 ) 
 - Ventura: Integrate MPI2.6 2.00.37 header files( SCGCQ00837256 ) 
 - SAS9305-16i Partial NVDATA	( SCGCQ00845398 ) 
 - Update RBD tool to support addition of "TraceSource" field in buffer entries.( SCGCQ00850240 ) 
 - Add GHS ARM compiler type to the CommonSerdes library makefile( SCGCQ00864342 ) 
 - Ventura MSS: Miscellaneous Interface Changes( SCGCQ00865201 ) 
 - Ventura: add Dword pad to SBRImage( SCGCQ00880161 ) 
 - Ventura: Modify VENTURA_PORTING	( SCGCQ00883658 ) 
 - Ventura: Additional Modifications For Host Boot Compatibility( SCGCQ00891598 ) 
 - Update Sbus address values( SCGCQ00894722 ) 
 - Removed Dauntless platform specific code from the backend PCI PL code base( SCGCQ00905990 ) 
 - Ventura: Cache MMU tables to increase performance( SCGCQ00906058 ) 
 - Ventura: Add compile option to enable/disable AHCI Support( SCGCQ00908659 ) 
 - IOP: Update loader for Tiger hardware( SCGCQ00910342 ) 
 - Add PIM/POM table entries for Tiger/Styker( SCGCQ00910622 ) 
 - Ventura: Update fwheadx.exe utility to recognize new devices	( SCGCQ00910696 ) 
 - Ventura: Update to latest MPI headers( SCGCQ00911517 ) 
 - IOP: Tiger/Stryker convert to use ARM Vectored Interrupt Controller( SCGCQ00917849 ) 
 - Ventura: Enable exclusive access instructions for synchronization( SCGCQ00927387 ) 
 - Ventura: Add partial image support to boot loader for MR Host Boot support( SCGCQ00929582 ) 
 - Cleanup some I2C address #defines( SCGCQ00930647 ) 
 - PL: Add handling of inbound SAS Topology Change List Events( SCGCQ00939823 ) 
 - Tiger: Implement MSIx Interrupt Handler for handling CSR	( SCGCQ00940370 ) 
 - Tiger: Add Pex HW related uart commands	( SCGCQ00940378 ) 
 - Allow library to be built within sub projects( SCGCQ00943057 ) 
 - Ventura: Create Harpoon (8-phy	( SCGCQ00949178 ) 
 - Ventura: Add support for "iop reset" CLI command	( SCGCQ00953786 ) 
 - Build all cleanup( SCGCQ00983745 ) 
 - Ventura: Create Partial XML file to disable backend PCIe/NVMe	( SCGCQ00996248 ) 
 - Tiger: Handle Host Link Down-Up	( SCGCQ00997588 ) 
 - Ventura: Allow Gen 3 host side connection	( SCGCQ01003672 ) 
 - Tiger Ventura: Renumber some Fault codes to clear out a distinct range for Ventura faults from MPI devices( SCGCQ01020521 ) 
 - Tiger IOP: Enable SR-IOV mode by default to allow multi-path	( SCGCQ01023850 ) 
 - Tiger FPGA: Implement Abort Task Set, LUN Reset and Clear Task Set to SED attached End devices( SCGCQ01024838 ) 
 - Ventura: Add non-production SRIOV build	( SCGCQ01035200 ) 
 - Ventura B0 default DMA Q masking settings( SCGCQ01082715 ) 
 - Update Tx EQ settings to recommended default values( SCGCQ01088723 ) 
 - Aero: Update IOP and libraries for new compiler	( SCGCQ01095747 ) 
 - AERO: Boot Loader Changes to get past IopStartOfDay( SCGCQ01127748 ) 
 - PLI: Add PL fault codes to doxygen generated PLI documentation( SCGCQ01154129 ) 
 - 9405W-16e NVdata file - Add to SAS 3.5 Phase 3	( SCGCQ01238957 ) 
 - Ventura/Marlin: backend PCIe: SRNS( SCGCQ01273153 ) 
 - Shut off Fast Path Engine more quickly when Faulting the controller( SCGCQ01353459 ) 
 -	( SCGCQ01355029 ) 
 - Warning removal 188	( SCGCQ01365171 ) 
 - Warning removal 1295	( SCGCQ01365178 ) 
 - FLR: Load pce hw settings when FLR happens.	( SCGCQ01382722 ) 
 - BST script for JBOD personality	( SCGCQ01389661 ) 
 - SCons armv5 build server support	( SCGCQ01393685 ) 
 - Improvements to Avenger build tools	( SCGCQ01400119 ) 
 - Handling EPD error recovery for Host Dcdb's in JBOD personality( SCGCQ01400587 ) 
 - Add new ISSI SPI flash as a supported part. (IS25WP256D-RHLE	( SCGCQ01412646 ) 
 - Fine tune block thresholds for slow arrays( SCGCQ01418141 ) 
 - Move ECC handling to OCM from DDR( SCGCQ01440110 ) 
 - Support additional dynamic sections in NVRAM	( SCGCQ01440146 ) 
 - Integrate MR PL-SCS Libs: SASFW_Ventura_Phase_5.0 04.250.09.00( SCGCQ01442972 ) 
 - pl: NVMe: NVMe task management modifications (part 2	( SCGCQ01445903 ) 
 - (SATA Only	( SCGCQ01454125 ) 
 - enable OOB FW download for MR alone.	( SCGCQ01455694 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.25.01.00 MR PL-SCS Libs( SCGCQ01455809 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_4.0 - 04.25.04.00 MR PL-SCS Libs( SCGCQ01462721 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.25.02.00 MR PL-SCS Libs( SCGCQ01464185 ) 
 - Make NVRAM changes to support Transport Ready( SCGCQ01464212 ) 
 - Support for disabling personality modes	( SCGCQ01464952 ) 
 - UNMAP support blocked on a OEM( SCGCQ01466783 ) 
 - Disallow mixture of NVMe drives and SAS/SATA drives in VD creation( SCGCQ01474267 ) 
 - Use the latest PL version 5.250.5.0	( SCGCQ01508530 ) 
 - Ethernet: Firmware Download using TFTP( SCGCQ00114825 ) 
 - Update L2cache.h	( SCGCQ00129837 ) 
 - DDR3 improvements based on internal customer feedback( SCGCQ00136650 ) 
 - Request for modification of default Mustang/Tbolt NVData to enable PCE ROM Bar (PCE Mem Bar 2( SCGCQ00138033 ) 
 - IR’s port to MPI v2.5( SCGCQ00140190 ) 
 - IOP/Boot Loader: Update initialization and boot loader assembly language code for PPC476.( SCGCQ00144376 ) 
 - Gen3 PwrMgmt: Update config page handler for IO Unit Page 7( SCGCQ00146802 ) 
 - Code cleanup and bug fixes for adding entries to Colt's TxDMAQ( SCGCQ00149115 ) 
 - Update MPI version information returned by the controller( SCGCQ00150073 ) 
 - pl: Detect if a device supports Download Microcode DMA	( SCGCQ00152237 ) 
 - Set the lower two bits of the context address correctly when messing with non-passthru dma entries( SCGCQ00155499 ) 
 - Custom NVDATA values for IR3	( SCGCQ00155852 ) 
 - Modify DDR3 ECC atomic scrub	( SCGCQ00170497 ) 
 - CLI Support reading and writing "physical 64 bit" memory	( SCGCQ00170518 ) 
 - Update TLB Dump CLI utility for Gen 3	( SCGCQ00172590 ) 
 - MPI2: Add IO Unit Page 10 - Host Credit Balancing	( SCGCQ00175997 ) 
 - RMTFLASH updates for silicon	( SCGCQ00185741 ) 
 - Gen3: Update temperature conversion equation as per LSI c temperature sensor for Invader	( SCGCQ00188118 ) 
 - Integrate L3 into OCM memory region	( SCGCQ00189083 ) 
 - Update romimage utility to handle larger image sizes	( SCGCQ00189755 ) 
 - Gen3: LTRACE support	( SCGCQ00193396 ) 
 - Change to DDR3 Library Interface	( SCGCQ00201057 ) 
 - Implement function that clears cached memory to zero efficiently	( SCGCQ00202447 ) 
 - Increase the frequency of the fast DCR clock to 500 MHz	( SCGCQ00206592 ) 
 - Overhaul read fifo algorithm for Invader	( SCGCQ00227345 ) 
 - Change OR retry *time* values to 1uSec (or whatever is lowest possible( SCGCQ00228191 ) 
 - Interface change to DDR3 library in order to utilize modified read fifo algorithm( SCGCQ00228961 ) 
 - pl pci: NVMe Initialization	( SCGCQ00276500 ) 
 - pl: NVMe SCSI IO Path( SCGCQ00308842 ) 
 - pl: NVMe Stang Initialization( SCGCQ00336344 ) 
 - (IOA	( SCGCQ00348944 ) 
 - pl pci: Discovery and Device Manager	( SCGCQ00352772 ) 
 - NVMe glue code( SCGCQ00357921 ) 
 - Add PCIe ID of A0( SCGCQ00369164 ) 
 - DDR3 - Update for Development Vehicle Support	( SCGCQ00385350 ) 
 - Update existing backend PCIe events to MPI-2.6 format( SCGCQ00391416 ) 
 - NVMe: Check in init workarounds for early NVMe device( SCGCQ00450246 ) 
 - Create new build environment for future product	( SCGCQ00477789 ) 
 - Update PQI and SOP to the latest revisions	( SCGCQ00502916 ) 
 - Add Mfg Pg 30 field for max SASCore exceptions per interrupt	( SCGCQ00525637 ) 
 - Ventura: Modify Ventura FLASH Layout to comply to new MPI2 regions	( SCGCQ00622860 ) 
 - Update IOCInit and IOCFacts handling for MPI 2.6	( SCGCQ00634123 ) 
 - Modify NVDATA to configure the port numbers for phys on FPGA	( SCGCQ00667559 ) 
 - Enterprise: additional preparation for device INTx support( SCGCQ00668628 ) 
 - Intruder FPGA Release 2.0 interrupt map	( SCGCQ00681295 ) 
 - Ventura: Create Release ANSI builds for Validation	( SCGCQ00682063 ) 
 - Ventura: Create a separate directory for MPI files in library releases( SCGCQ00684275 ) 
 - Ventura: Update FIrmware Upload and Download for MPI 2.6	( SCGCQ00741847 ) 
 - FW Controlled Spinup: Periodic NOTIFY (ENABLE SPINUP	( SCGCQ00757326 ) 
 - Ventura: Implement backrace symbol output( SCGCQ00759726 ) 
 - Ventura: Update PDB Performance Monitoring( SCGCQ00773033 ) 
 - Ventura: MSS - Build system update and various minor bug fixes( SCGCQ00787018 ) 
 - Ventura: Ensure all OCM initialization uses 8-byte writes( SCGCQ00806159 ) 
 - Ventura: MSS - Atomic ECC scrub functionality( SCGCQ00817281 ) 
 - Ventura: Add DDR Library To MR Release Package & Change PL to include PCI( SCGCQ00822637 ) 
 - Ventura: IOP - Finish IT Firmware integration with MSS library( SCGCQ00829569 ) 
 - Miscellaneous RMC AI	( SCGCQ00911441 ) 
 - Ventura: update sbrimage to skip an image( SCGCQ00916884 ) 
 - TigerStryker: (IOP( SCGCQ00929151 ) 
 - Tiger IOP: Update clock divider function	( SCGCQ00987123 ) 
 - Changes needed in IT Fimrware to implement a StorCLI functionality( SCGCQ01037129 ) 
 - Ventura MSS: Add debug prints indicating width of read leveling data eye for each data lane( SCGCQ01049394 ) 
 - Warning removal 186	( SCGCQ01365170 ) 
 - JBOD profile 20 with 240VD/PD. Make profile 20 work as 240Pds.( SCGCQ01373083 ) 
 - pl: NVMe: add translation for PRP Offset Invalid error	( SCGCQ01378850 ) 
 - Add site license warning suppression	( SCGCQ01416563 ) 
 - Removed two debug print statements.	( SCGCQ01429843 ) 
 - MR7.4 Talla 16i NVMe: (Intermittent	( SCGCQ01430608 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_5.0 - 05.25.00.00 MR PL-SCS Libs( SCGCQ01449472 ) 
 - Ventura/Marlin: Change to ARM site licenses( SCGCQ01461714 ) 
 -	( SCGCQ01473957 ) 
 -	( SCGCQ01511868 ) 
 - USB stack library for Thunderbolt platform( SCGCQ00135528 ) 
 - Gen3: L3 Cache Controller support( SCGCQ00140714 ) 
 - Support Elektra's BIST functionality	( SCGCQ00154745 ) 
 - Second set of DDR3 changes for Elektra/Invader( SCGCQ00160620 ) 
 - Update move to and from DCR GCC assembly language macros	( SCGCQ00166717 ) 
 - IOP : Atomic ECC Scrub support( SCGCQ00170052 ) 
 - Gen3 IR: C_IR::SetFastPath( SCGCQ00200491 ) 
 - ONFI: Add UART command for bad block list creation( SCGCQ00215351 ) 
 - Add more #defines for the CCR0 register in ppc476.h( SCGCQ00223487 ) 
 - When a fault occurs, send SAS BROADCAST(RESERVE 4( SCGCQ00229102 ) 
 - Invader B0 temperature sensor coefficients must be updated( SCGCQ00317514 ) 
 - PCIe Interrupt Changes( SCGCQ00340457 ) 
 - NVMe: Read/write IO breakup for PRP format SGLs( SCGCQ00415503 ) 
 - SOP/PQI Device Initialization and base IO support( SCGCQ00426938 ) 
 - Change SASIoUnitControl to IoUnitControl for Dauntless sources( SCGCQ00456975 ) 
 - No check for good status in pliFpeGeneralErrorInterrupt(	( SCGCQ00490961 ) 
 - Develope Boot Loader Build Process for ARM( SCGCQ00571692 ) 
 - Ventura: MSS - Initial ARM library build creation and interface check build creation	( SCGCQ00635808 ) 
 - Ventura: RMC add support for AVSO programming( SCGCQ00822255 ) 
 - Ventura: backend PCIe: add support for not faulting on resource setup failure( SCGCQ00928542 ) 
 - Ventura: Support csw library both without and without debug symbols.	( SCGCQ00931577 ) 
 - IOP: Create Tiger workaround definition	( SCGCQ01002513 ) 
 - JBOD_Personality : Base EPD management changes( SCGCQ01301492 ) 
 - Implement Array Based Cache Block Threhsolds	( SCGCQ01316715 ) 
 - Warning removal 68( SCGCQ01365167 ) 
 -	( SCGCQ01378116 ) 
 - Implement HW Change Request: Need workaround for PCIe expansion BAR issue implemented in MegaRAID( SCGCQ01382712 ) 
 - Store the RAID SubDevID in NVRAM to have a reference to original RAID-ID.( SCGCQ01385845 ) 
 - Cache headers, bsb_headers were not rearranged after the pre-boot memory is released.( SCGCQ01397554 ) 
 -	( SCGCQ01419068 ) 
 - Avenger: Change symbol build tool from external executable to internal python( SCGCQ01494130 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_6.0 - 05.250.04.00 MR PL-SCS Libs	( SCGCQ01494509 ) 
 - Updates for Trident EDS 1.02	( SCGCQ00173281 ) 
 - FPE trace buffer prints for PCIe devices	( SCGCQ00394555 ) 
 - (ARM BUILD	( SCGCQ00552099 ) 
 - SAS3.5 Create new NvData Schema that separate channel and OEM NvData	( SCGCQ00807520 ) 
 - Warning removal 177	( SCGCQ01365169 ) 
 - Handle FLR when OCR is disabled	( SCGCQ01389611 ) 
 -	( SCGCQ01464963 ) 
 - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_6.0 - 05.250.01.00 MR PL-SCS Libs( SCGCQ01474311 ) 
 - Make DDR3 support optional( SCGCQ00143542 ) 
 - Warning removal 1254	( SCGCQ01365176 ) 
 -	( SCGCQ01382765 ) 
 - Perform the F/W Upgrade and downgrade.( SCGCQ01385051 ) 
 - Define SBR bits to control UART speed( SCGCQ01465004 ) 
 - Agni (PBAM	( SCGCQ00342465 ) 
 -( SCGCQ01384070 ) 

	

Version 50.3.0-1075- Moderate Impact/Low Probability of Occurrence
-------------------
    BIOS:  7.03.02.0
	UEFI Driver: 0x07030400
	HII:  07.03.11.00
	MR FW:  5.030.00-1232
	PACKAGE:  50.3.0-1075
fixes:
-1901 Fault due to a Port open fail interrupt without a matching transport error.(SCGCQ00136195)
-Thunderbolt B0: Implement workaround from BT1682(SCGCQ00138062)
-Change hardcoded fault code to a properly defined code.(SCGCQ00141606
-Calculation of pl memory may be bigger than necessary for some regions.(SCGCQ00141622 )
-fault 0x5893(SCGCQ00142708)
-SAS Device Page 1 data for first drive or single drive was all zero(SCGCQ00144104 )
-Fix SMP passthrough immediate mode(SCGCQ00144357)
-pl fpe diag command (mgrds) shows too little data(SCGCQ00144379)
-x5891 Fault After OPEN Timeout(SCGCQ00145434)
- Converting SATA Standby count to proper Standby condition timer value in Power condition mode page (page 0x1a) for mode sense command.(SCGCQ00145610) 
 -FPGA: Gen3 TaskMgmt: 0x265D Fault When Processing Multiple TARGET RESET TMs(SCGCQ00145645)
-Correction to Diagnostic Code to Show PL Memory Details(SCGCQ00145990)
 -PL Library wouldn't link due to missing plmath.o(SCGCQ00146017 )
 -B-T1680: 6001 fault(SCGCQ00146564)
 -FPGA: Gen3 TaskMgmt: 0x5110 Fault on Overlapped TARGET RESETs to SATA devices(SCGCQ00146626)
 -Fix 6202 fault when sending I/Os to a SATA drive(SCGCQ00146780)
 -PL Lib build fails(SCGCQ00146819)
 -Expander goes missing during Expander phy reset testing.(SCGCQ00146846)
 -FW hangs when sending sense data back to the host for a sata I/O(SCGCQ00146936)
 -ON_TASK_MANAGEMENT_INACTIVE Notification Not Being Sent To CudaMgr(SCGCQ00146956)
 -FPGA: Gen3 TaskMgmt: Internal Memory Corruption Causes 0x6825 Fault During LUN RESET(SCGCQ00146965)
 -Enable Requestor/completor after port enable completes instead of waiting for associated discovery to complete.(SCGCQ00148644)
 -Fault 6004 on a target reset TM to an expander attached SAS drive running FP IOs(SCGCQ00149004)
 -(Sata Only): Non auto SCSI command to a fast path enabled SATA drive times out.(SCGCQ00150032)
 -TBM: Normal mode entries are missing after pliStartOfDay(SCGCQ00150202)
 -(Sata Only): Fault 0x265D on sending Read(16) with LBA greater than 48 bit(SCGCQ00151324)
 -SSP Error Handler function chokes on Fast Path IO error handling(SCGCQ00151377) 
 -TM completion handler incorrectly clears midused for Fast Path IOs(SCGCQ00151378)
 -Fpe Manager has required code optimized out.(SCGCQ00151836)
 -Disable CmdAnalyzerStateTimer for FPGA(SCGCQ00153845)
 -wrong ComponentId values used to identify Cobra expander(SCGCQ00154786 )
 -RequestLength field not set in the SMP Report EDFB Settings requests(SCGCQ00155258)
 -TBM: TLB Fault while reading trace entry(SCGCQ00155579 )
 -NA(SCGCQ00155582)
 -PL library linkerr error(SCGCQ00156105 )
 -Discovery leads to FW Fault 0xD072(SCGCQ00156488)
 -FPGA: Task Management on Invader may cause a 6002 Fault(SCGCQ00157799)
 -FPE: Aborttask UART command to handle FPE IOs does not work.(SCGCQ00157806) 
 -PL Lib build fix(SCGCQ00158324)
 -SATA FPE IOs get stuck(SCGCQ00158983 )
 -FPGA: TxDma fails to send data after receiving an xfer_rdy from the target(SCGCQ00159121)
 -Fixed 0x265D fault generated by with execution of command "pl reg *".(SCGCQ00159371)
 -TM completes successfully even after invoking a timeout(SCGCQ00159958) 
 -Debug tracking value was not correctly reset on PL(SCGCQ00160504)
 -SEP devices marked as Fast Path Capable(SCGCQ00160703 )
 -FPE: Fault 6003 Occurs during Jammer script testing(SCGCQ00160884) 
 -Fault 0x265D occurs when receiving an Invalid MID (Jammer Test Case)(SCGCQ00162468) 
 -FPE- fix print statement in the frame ownership function (SCGCQ00162942)
 -Get the formatting/alignment of columns to match up.(SCGCQ00163733)
 -FPE: Dev handle corruption while posting IOs to Cuda's IOPStartQueue(SCGCQ00163840)
 -FPGA: Handling I/Os In Target Mode results in a fault 0x5120.(SCGCQ00165393 )
 -FPGA: FPE: 0xD063 fault while running fast path IOs(SCGCQ00167839)
 -FPE fault D094(SCGCQ00167842 )
 -Fpe exception queue interrupt handling does not update queue if an entry is invalid(SCGCQ00168593)
 -(PL) Missing Not Responding and Device Added Events on Device Move(SCGCQ00169455)
 -Fault 4203 while hot(SCGCQ00170048 )
 -PL is faulting with fault code 0xd075 when an IO times out(SCGCQ00170147)
 -SATA I/O timeout while loading OS drivers(SCGCQ00170253) 
 -reading trace buffer adds trace entries(SCGCQ00170305)
 -0xD071 Fault when running TM's to SATA drives(SCGCQ00170551 )
 -FPGA: 5894 fault during stress and Random Expander Phy power downs(SCGCQ00171100)
 -Fast Path Timer errors not seen after intial timer error(SCGCQ00172024 )
 -Fault 0x5111 while sending random TMs to Random SATA Targets every 5 to 8 seconds(SCGCQ00172122)
 -Verification discovered scenario where 2 identical OPEN requests may come from SASCore for same device/IO(SCGCQ00172541)
 -Fault D091 with Destructive Domain Validation Test.(SCGCQ00173093)
 -FPGA: IOs fail while doing Target mode TM testing (SCGCQ00174516)
 -difficult to change SATA NCQ option on a device(SCGCQ00174545)
 -ReadBuf Command hangs(SCGCQ00174555)
 -Confusing prints in task management code(SCGCQ00177300 )
 -FPGA: IOs fail during Target Mode SSP TM tests(SCGCQ00177626)
 -D110 fault while doing Block Move test(SCGCQ00181603 )
 -Fault 670A with Block Move Test and Powercycling Enclosures(SCGCQ00181751 )
 -write buffer command (via a sata passthrough request) during stress causes the adapter to reset.(SCGCQ00181783)
 -FPGA: Hw pending Ios not started after IO completion(SCGCQ00184075)
 -Build all fails with error(SCGCQ00184424 )
 -Task Management code slowing down IO path(SCGCQ00184744)
 -FPGA: Fault 0x265D while running IO and powercycling Enclosures(SCGCQ00184892)
 -Phy power code is using the wrong mask(SCGCQ00186364)
 -Initialization of DMAGroup in txctxmgrs is wrong for non(SCGCQ00186661)
 -Power management init code needs to be called before phy init(SCGCQ00186691 )
 -TBM Recursive Fault(SCGCQ00187763 )
 -Controller faults with code 5891 while running task management tests(SCGCQ00187778 )
 -Controller faults with code 6003 while running task management tests(SCGCQ00187962)
 -FPGA: After IO Timeout and TAsk Management IO stops and UART hangs(SCGCQ00188093)
 -Debug print was mis(SCGCQ00188926)
 -PL Lib No DEBUG build wasn't compiling(SCGCQ00189379 )
 -Multiple Timers could be added for single IO(SCGCQ00189781)
 -Running I/Os to SATA HDDs w/Jammer scripts results in fault 0x265D(SCGCQ00189790)
 -Gen3: A Jammer script sends too much data for a Read command which results in SysDmaParity fault.(SCGCQ00190412)
 -Fault 0xD071 while doing message unit reset(SCGCQ00190417)
 -After NCQ error recovery, device QDepth is not being restored.(SCGCQ00190925)
 -Fixe pl.h compile when ENABLE_TRACEBUFFER_MANAGER is not on(SCGCQ00190928 )
 -IO count mismatch while handling Task Set Full event in firmware(SCGCQ00192194)
 -Gen3 PwrMgmt: Update shared global Pwr Mgmt structures.(SCGCQ00192501)
 -SATA 4k sector size will not start IO.(SCGCQ00193363)
 -Invader A0: Fault 0xD027 while running Medusa Pain Stress Tool in Windows 2008 R2(SCGCQ00194013)
 -Sending HARD RESET to target while under I/O load results in 6001 IOP fault(SCGCQ00194139)
 -Firmware repeatedly sending a event whenever it get a spinup notify causes target mode initialization to stall(SCGCQ00194444 )
 -SATA write I/Os timeout especially behind expander(SCGCQ00194464)
 -FPE Status values passed to iopiFPEHandleException() weren't included in PLI release(SCGCQ00194558)
 -Gen3 PwrMgmt: Tx/Rx DMA Memory faults 0x6B72 when exiting shutdown mode(SCGCQ00194688)
 -Gen3 PwrMgmt: Unexpected event is sent when changing Direct Attached HDD Pwr states.(SCGCQ00194919)
 -Invalid Loginfo value seen when a Wrong Relative Offset error encountered on transmit data path(SCGCQ00194925)
 -IO Timeouts/0x6001 fault during SATA TM Read Mayhem test(SCGCQ00195557)
 -Sata Targets are never initialized(SCGCQ00197633)
 -fault d012 with stress fast path IOs on a single drive (SCGCQ00199529)
 -Invader A0: D072 Fault during stress and whole port glitches(SCGCQ00200261)
 -Fault 0x26B1(SCGCQ00200380 )
 -Gen3 PwrMgmt: Open Address frame has a SAS Address of zero when a device wakes up from PM.(SCGCQ00200472_
 -Gen3PwrMgmt: PM status interrupt fires intermittently.(SCGCQ00200477)
 -Fault 0x5805(SCGCQ00200637)
 -Invader A0: 5893 Fault when the whole port (between enclosures) is broken during stress.(SCGCQ00200645)
 -TM causes 0xD072 fault if a TM fails to clean IOs on a Target Reset(SCGCQ00200652)
 -When direct attached entities are disconnected from Invader phys, occasionally phys don't show link down.(SCGCQ00202367)
 -IOs timeout when running task management tests(SCGCQ00203055
 -IO timeout to SATA target behind expander.(SCGCQ00203063)
 -Try running firmware with Fast Path engine Dyno mode enabled, observe drives don't really show up correctly ((SCGCQ00203659)
 -Compile option for to PL setup the SASCore to use alternate PLB segement for memory access was incorrect(SCGCQ00204613)
 -Invader A0 (init/targ): 0x7c54 fault during stress and cable breaks(SCGCQ00205569 )
 -IOCount for DevHandle 0x00 is incremented during FPE hardware pend queue cleanup(SCGCQ00205960)
 -Update compile option sets SASCore to use alternate PLB segment for context access to work on FPE CompQ(SCGCQ00207017)
 -Invader A0: D072 fault during Block Move test(SCGCQ00207153)
 -(SCGCQ00207699)
 -BIOS banner spin up delay issue (w/SATA drives)SCGCQ00208198)
 -Fault 0xD100 when sending SATA PassThrough IO(SCGCQ00208413)
 -A0: Firmware not clearing TM Completion Mid flag correctly(SCGCQ00209005)
 -Direct attached SEP device did not get discovered properly.(SCGCQ00209485)
 -Invader A0: All devices go missing when the link between the first two expanders is broken(SCGCQ00210025)
 -Bursty SAS write I/O when running with SATA format cmd(SCGCQ00210166)
 -Non Target build still had a target only function(SCGCQ00210482
 -For Target mode when performing send status with data the call to iopiMemoryMove() doesn't reflect the correct address space.(SCGCQ00213224)
 -Invader A0: Fault 6708 when loading the Linux Driver to Cascaded Enclosure Topology(SCGCQ00215422 )
 -Invader A0: Fault D060 while running Block Move and Task Management Test in CM(SCGCQ00215835)
 -Fault 0x5881(SCGCQ00215843 )
 -B0 FPGA: Pl faults with fault code 0x5842 during MR FW boot up.(SCGCQ00216384)
 -Gen3: FPGA validation of B0 fails with 0x6109(SCGCQ00217020 )
 -Snooping configuration not set on SAS Core DMA PLB Master(SCGCQ00218116 )
 -Failures connecting to SATA drives or expander attached disks(SCGCQ00218117)
 -SATA IO timeouts after NCQ error handling (SCGCQ00218797 )
 -Fault 0x6001 after IO timeouts(SCGCQ00219558)
 -SATA Passthrough Message to Non(SCGCQ00219819)
 -Discovery fails with SMP timeout while cable pull push in a multipath topology(SCGCQ00221089)
 -Invader A0: 0x5002 on Target when disabling then reenabling Phy(SCGCQ00223630)
 -Invader A0: Data Corruption/Miscompare when changing Global Power Management via MPI Requests(SCGCQ00224120)
 -Fault 0x4A00(SCGCQ00224173)
 -Fault 5845 seen when running IO with cable glitching(SCGCQ00224215)
 -Firmware displayed wrong version number(SCGCQ00225971 )
 -Invadr A0: Add new software flag to store IO messaging mode(SCGCQ00226340)
 -Fault 0x610B seen when doing Task management(SCGCQ00226699)
 -0x61A3 fault during task management(SCGCQ00226954)
 -Fault 0x5302 when running IO and using Close Clear Affiliation option(SCGCQ00227563)
 -Invader A0: Fault x5842 with running Block Move and Task Management Test(SCGCQ00227896 )
 -Fault x5900 seen running heavy IO with discovery(SCGCQ00228216)
 -System hangs or reboots, or Fault x5863(SCGCQ00228819)
 -Large write IO timeout(SCGCQ00228945 )
 -Drives lost due to HW interrup not cleared correctly (RX Context Manager Timer Reached)(SCGCQ00229130)
 -Fault 0x4203 during Reconstruction on SATA drives(SCGCQ00229646)
 -Slow performance of non automated IOs issued to SATA drives(SCGCQ00230305)
 -Invader A0: 0x583B fault during IO and Task Management in CM(SCGCQ00230354 )
 -Add flush write to ensure the pause goes to FPE immediately,(SCGCQ00230498 )
 -SMP Passthru requests from host not completing when expected reponse length is set to 1.(SCGCQ00231734)
 -Fault 0x5842 occurs when cable break/glitching done running IO(SCGCQ00232016)
 -Gen3: PwrMgmt (SCGCQ00233745)
- Invader: Fault 0x5831 occurs after PL register dump(SCGCQ00235412)
 -Fault 0x510B(SCGCQ00237408)
 -Fault 510b during enclosure pull push.(SCGCQ00237445)
 -Fault 0x5304 during enclosure pull push(SCGCQ00237446)
 -Invader A0: 0x5894 during IO Stress and 5ms Whole Port Glitches(SCGCQ00238962)
 -IO timeouts while running stress loads on a mix of SAS and SATA drives(SCGCQ00239369 )
 -Large IO size to mixed SAS/SATA causing errors(SCGCQ00242618)
 -PL Fault 0x670C(SCGCQ00243099)
 -Gen3 : Build failing for the latest tipcode when build all command is issued.(SCGCQ00246801)
 -Fault d062 while running IOs on SATA drives with medium errors(SCGCQ00247456 )
 -Fault 0x583E(SCGCQ00247837)
 -Discovery error x90 while running IOs on a mix of SAS and SATA drives.(SCGCQ00249597)
 -Fault 6708 seen running cable break/glithes(SCGCQ00250218)
 -Discovery error with status 0x10 during enclosure pull/push cycles(SCGCQ00250817 )
 -Invader A0: Update needed for RAID Context usage(SCGCQ00251530)
 -Discovery fails to complete in 120s with chained enclosures(SCGCQ00251979)
 -Linking PL library with non(SCGCQ00253272)
 -Dependency on GHS library for 64 bit multiplication (SCGCQ00253316)
 -Clean up depriciated device manager functions plDeviceManagerSetMissing(SCGCQ00255210 )
 -Trace buffer may be missing last chunk, up to 16k.(SCGCQ00255895)
 -Power settings request will fail to SATA drive that has powere mode enabled.(SCGCQ00256725 )
 -On fault, some final part of the Ring buffer may not be present in the trace buffer.(SCGCQ00257652)
 -Fault 0x58B4 when trying to run on a 4port controller(SCGCQ00258518)
 -PL Debug string PL_DBG_STR_CONTROLQ_DISABLE_HANG needs to be fixed so a print does not show up as ??SCGCQ00258558)
 -Move FPE and TBM global bits out of PL_INFO_FLAGS and into the FPE_INFO and TBM_INFO fieldsSCGCQ00258992)
 -Fault 0x5849(SCGCQ00259195)
 -Invader A0: (PL) Activate FPE after TM completes is getting initialized incorrectly in PL(SCGCQ00259546)
 -Gen 3 : Affilation conflict and the SATA drive connected beyond the expander will not be detected(SCGCQ00259968)
 -Data corruption seen during TLR(SCGCQ00260533)
 -Invader A0: (PL-Target Mode) Target Assist reply not being sent for EEDP apptag error(SCGCQ00261585)
 -Fixed name of local variable(SCGCQ00261861 ))
 -Code analysis tool defects resolution(SCGCQ00263862)
 -PL fault 0xd074 processing the same FPE Completor Error (Timer) twice(SCGCQ00264889)
 -PL was making call to IOP layer config read function for a READ_CURRENT of PL owned page before Port Enable completes(SCGCQ00266032)
 -pldebug.h file is not included in current PL lib releases(SCGCQ00276224)
 -Controller keeps resetting a SATA drive if the drive is security locked(SCGCQ00276277 )
 -Fault D099(SCGCQ00276477)
 -Fault x6108 seen when running IO and having TM occur(SCGCQ00277552)
 -Fault 0x6414 (SCGCQ00278271)
 -Fault x584B running Task managements with cable glitching(SCGCQ00278809 )
 -Invader B0: Implement hardware workaround for setting TLR bit properly.(SCGCQ00279492)
 -Fault 0x6414 Hot Plugging a Direct Attach Device(SCGCQ00279649)
 -A debug print needs Link # added to be more useful(SCGCQ00279991)
 -Invader B0: Firmware not sending Close (Clear Affiliation) to SATA drive(SCGCQ00280557 )
 -A hardware workaround was incorrectly disabled for B0(SCGCQ00280738)
 -Invader B0: 6003 fault while running SSP_INIT_Normal_List group of jammer scripts(SCGCQ00280742)
 -PL: receive path stalls result in SMP timeouts(SCGCQ00281960)
 -fault 5821 while running IOs on SATA drives (with DEBUG disabled)(SCGCQ00282860)
 -Gen3(SCGCQ00282874)
 -Invader B0: During whole port glitches while running i/o, hit D079 fault.(SCGCQ00282946)
 -Invader B0: Fault x5894 durning I/T switching during IO(SCGCQ00283484)
 -Help for CLI command "pl pm ps" not adequate(SCGCQ00283534)
 -Sata Translation I/Os will fail or cause 583C fault.(SCGCQ00284574)
 -Invader B0: Fault 0x5896 while Powercycling Random Enclosures(SCGCQ00284582 )
 -Invader B0: Continuous async events and Cuda pause while running IOs on SATA(SCGCQ00285056)
 -Fixed source level debugging using GHS probe.(SCGCQ00286179)
 -Fault d075 (SCGCQ00286703)
 -Invader B0: D074 fault occurs during simple IO stress when Fastpath timeout is set to the minimum value (1 second)(SCGCQ00286838)
 -Invader B0: FPE Manager Fault code cleanup and documenation update(SCGCQ00286906) 
 -Fast Path hardware Auto Pend and Completion events don't work.(SCGCQ00287160)
-Phy page 0 may report incorrect information of the current phy(SCGCQ00289533)
 -power management mode.(SCGCQ00290665)
 -An IO may incorrectly be aborted with loginfo PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED when it has been sent(SCGCQ00291818 )
 -Initiator behavior in dropped ACK/NACK to SSP Command frame compliance test(SCGCQ00292021)
 -Fault x5801 seen running IO with Task management(SCGCQ00292512)
 -Invader B0: SATA Passthrough occasionally time out during Heavy IO(SCGCQ00292639)
 -Volume removal resets the controller for further operations.(SCGCQ00292814)
 -Invader faults with 0x7C39 when sending Security Protocol Out Disable Password command(SCGCQ00293371)
 -PL: Fault 0x670B when sending SCSI Read Long to a 4K sector size SATA drive(SCGCQ00293644)
 -Fault 5813 while pulling direct attached SATA drives(SCGCQ00293898)
 -Invader (B0): Fast path IO with a requestor error is never started after a timer error(SCGCQ00294026)
 -Fault 0x61a2 while running IOs on a mix of SAS and SATA.(SCGCQ00294588)
 -0x584B Fault during whole port cable glitches(SCGCQ00295331)
 -L2 Parity error occurs when dumping SAScore registers via UART command(SCGCQ00296461)
 -READ BUFFER command in data mode executes with good status when Bufferid=0 and Buffer Offset=non(SCGCQ00297147)
 -Invader B0: CSET of SCGCQ00237417 incorrectly checks TxDMA Start register(SCGCQ00297565)
 -Fast path IO is never started after a timer error because RL granted bit is not set in MST(SCGCQ00297968)
 -Invader B0: All Drives lost (turn red) during IO + TM in CM(SCGCQ00298619 )
 -Invader B0: SATL:'Additional Sense' not set for REQUEST SENSE command when the drive is moved to IDLE power condition state(SCGCQ00300293)
 -(PL) Fault 0x5896.(SCGCQ00300593)
 -Firmware faults with PL fault code 0x5854(SCGCQ00302792)
 -Invader B0: 0x6001 fault while running a Max Outstanding IO count test with DDR(SCGCQ00304313)
 -Invader B0: Fault 584B during Destructive Domain test(SCGCQ00305407 )
 -Invader B0: PL not adding timer back when restarting IOs with Requestor Timer Error(SCGCQ00307944)
 -Invader B0: fault x5854 during I/T switching with IO and expander PHY resets(SCGCQ00307989)
 -PL fault 0xd10d during enclosure pull push(SCGCQ00310092 )
 -Invader B0: Fault 0x583D When starting IO to cascaded enclosure topology(SCGCQ00313872)
 -Fault 0x2667 running "pl dbg" when SMP Passthroughs with Immediate mode are in use(SCGCQ00314238 )
 -(FPGA) changes to firmware for B0 FPGA(SCGCQ00316360 )
 -A link may become stuck and unable to intiiate a connection(SCGCQ00317250)
 -Fault xD10E seen running IO with TM(SCGCQ00318724)
 -Invader B0: PL register dump doesn't include IOP Completion Queue(SCGCQ00319389 )
 -Fixed an Error in Code to Allow a Hardware Workaround to Be Correctly Enabled(SCGCQ00321025)
 -Invader A0 fault 583B fault(SCGCQ00321227 )
 -Invader B0: Fault 0x4101 while power cycling expanders(SCGCQ00321678)
 -5801 Fault running IO with random Task Management(SCGCQ00321865)
 -IO timeout for PL owned MID after sending QueryTask(SCGCQ00323459)
 -Invader B0: Fault 583A during Destructive Domain test(SCGCQ00323745)
 -Invader B0: pl dbg does not dump TBM registers(SCGCQ00326191 )
 -Invader B0: Fault 0x5851 during Destructive Domain test(SCGCQ00326809)
 -Low performance seen doing very low Q depths (1,2,3 outstanding IO levels) write IOs(SCGCQ00328670)
 -Added Hardware Cleanup Code to Prevent Fault 0x6002(SCGCQ00328671)
 -Added C0 Hardware Workaround to Prevent Fault x5801 seen running IO with Task management(SCGCQ00329584)
 -Link locks up when jammer is used to create wrong SATA FIS types.(SCGCQ00331579)
 -Change Hardware Workaround To Only Execute if Actual Cleanup is Done(SCGCQ00334830)
 -Invader B0: Maximum outstanding IOs not exceeding beyond 64(SCGCQ00335182)
 -Fixed Link Layer Interrupt Handler to Prevent Fault 0x4101(SCGCQ00338504)
 -Invader B0: 0x26B1 fault during large IO count to cascaded topology(SCGCQ00339747)
 -TargetMode unable to receive more than 64 IOs simultaneously (initially)(SCGCQ00341221)
 -PL: Read Log Ext command timeout.(SCGCQ00342412 )
 -7B00 fault due to incomplete table(SCGCQ00349335)
 -5811 fault when running port enable(SCGCQ00349337 )
 -DIAG_SHOW_MREQ_DETAIL feature fails to compile(SCGCQ00350762)
 -(IOA) Queue pointers calculations are incorrect(SCGCQ00353301 )
 -Back end PCI bring up(SCGCQ00353319)
 -Backend PCIe doesn't handle Legacy interrupts(SCGCQ00361845)
 -Bus and device are evaluated properly while configuring device's interrupts. (SCGCQ00363567)
 -Initial NVMe bringup fixes(SCGCQ00363615 )
 -Couple of PDB interrupt handling fixes(SCGCQ00378025)
 -Workaround for SGLOffset for PCIe targets(SCGCQ00383644)
 -Some PCIe config page fixes(SCGCQ00392850)
 -Fix several NVMe related bugs(SCGCQ00395578)
 -Check for Dword alignment when translating from IEEE64 to NVME PRP.(SCGCQ00397857)
 -Fixes for non read/write SCSI IO requests to a backend NVMe device(SCGCQ00399268)
 -Critical Fixes for PCIe IO Unit config pages (SCGCQ00400007)
 -D065 fault running AHCI IO with frame size > 128(SCGCQ00404358)
 -D300 fault on init with PCIe devices unsupported in Manufacturing Page 9(SCGCQ00406169)
 -Unaligned CE Image causes PL fault 0xd115 when using CE Auto Load(SCGCQ00408789)
 -Bad pointer access in plPciRcSetPcieLinkWidth(SCGCQ00409869)
 -Backend NVMe devices don't work if stored host page size is invalid(SCGCQ00410848)
 -NVMe: IO breakup due to MDTS or very large transfer size doesn't work(SCGCQ00413295 )
 -A write and verify command with many SGEs can cause a FW fault(SCGCQ00413390)
 -AHCI: Write command with FUA set to non(SCGCQ00414014)
 -Handle Stang BAD_ALIGNMENT exception differently(SCGCQ00414488)
 -AHCI: very large xfer count in one SGE causes fault 0xD300(SCGCQ00414589)
 -(PLLIB) Some PL Light routines are not included in the libraries(SCGCQ00415107 )
- Direct(SCGCQ00415180)
- Modify handling of a couple of Stang exceptions(SCGCQ00415459)
 -NVMe: Data corruption and unexpected IO failures(SCGCQ00418954)
 -265D fault running write IO to AHCI device(SCGCQ00419400)
 -MaxPayload/MaxReadRequestSize are getting set to strange values in some cases(SCGCQ00420926 )
 -Sas3.5: DL: SAS Device Page 0 access returns PCIe device (SCGCQ00423968)
 -26B5 fault when trying to init AHCI target(SCGCQ00426195)
 -D065 fault running IO to an AHCI target(SCGCQ00433598)
 -Build without PL_FEATURE_PCI_DEVICE_SUPPORT fails to compil(SCGCQ00434704)
 -(PL) New Spinup code does not compile with PL_FEATURE_PCI_DEVICE_SUPPORT set to zero(SCGCQ00434738)
 -SAS3.5: Add ALADIN feature macro and add pliAladin function calls to pliComplianceCheck.c.(SCGCQ00436117)
 -PCIe Switch upstream and downstream port relative configuration not proper(SCGCQ00436160 )
 -265E fault running IO and Abort Task TM(SCGCQ00438352)
- AHCI: D300 fault when using PCI IO path in single thread mode(SCGCQ00439523)
 -AHCI: read timeout after issuing MODE SENSE command(SCGCQ00441381)
 -Firmware hits Fault D10F while creating configuration on AHCI SATA drive(SCGCQ00442131 )
 -The TBM is initialized twice in Invader (and Dauntless) firmware(SCGCQ00443385)
 -AHCI: PL shouldn't fault when AHCI SGL translation encounters an invalid address(SCGCQ00443456)
 -E00D fault while running firmware translated read + mode sense(SCGCQ00444010)
 -Assertion failure fault D300 on PciIoCount adjustment(SCGCQ00447911)
 -ControllerPhyDeviceInfo is not properly populated for PCIe IO Unit Page 0(SCGCQ00448100)
 -NVMe: PL shouldn't fault when NVMe SGL translation encounters an invalid address(SCGCQ00448246 )
 -Fault 0x26b5 is hit when firmware tried to access attached PCI device memory.(SCGCQ00454824)
 -I/O timeout when Windows driver issues all I/O's via SCSI IO (no Fast Path)(SCGCQ00455679 )
 -AHCI: When an automated command starts right after a translated (non(SCGCQ00455698)
 -AHCI: Some internal variable accesses used the wrong index.(SCGCQ00457265) 
 -Data Corruption observed during IO + "random" TM to AHCI(SCGCQ00457786 )
 -AHCI init fails to find any devices in some cases(SCGCQ00458681)
 -0xD300 assertion seen when fast path engine throws error for internal PCI IOs.(SCGCQ00459137)
 -Dauntless FAULT EC07 upon port init with 4 or more devices connected behind PCI switch (SCGCQ00461370 )
 -PL: Re(SCGCQ00465527)
 -Dauntless FAULT 5801 running mixed IO with random task management test(SCGCQ00467347)
 -ECA2 running IO to 3 AHCI devicesSCGCQ00469042)
 -AHCI: Device discovery failed because of the missing MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST event(SCGCQ00469381)
 -4300 fault running IO to AHCI device after issuing a SATA passthrough message(SCGCQ00469630)
 -Fault E010 during AHCI IO(SCGCQ00470246)
-E403 fault during NVMe init(SCGCQ00470712 )
 -READ CAPACITY(16) SCSI IO to some AHCI devices result in command hang(SCGCQ00470905)
 -Additional fixes required for PL_PCI_DEVICE_MAX_DEVHANDLE usage(SCGCQ00471074)
 -Hang on error during PCIe discovery(SCGCQ00471277)
 -Dauntless FPGA: 670D fault while collect pl dbg(SCGCQ00471741)
 -IO submitted by host to fast path is stuck(SCGCQ00472322)
 -Fault 0xB0B0 with AHCI device that does not support port 0(SCGCQ00473624 )
 -Hitting MPI2_IOCSTATUS_INVALID_SGL.(SCGCQ00473919)
 -Device added event for the existing devHandle(SCGCQ00475377)
 -Unable to see AHCI devices off switch in CM(SCGCQ00478421)
 -PL: Firmware path read/write IOs to backend PCIe devices may time out(SCGCQ00481302)
 -PL: Last elements of NVMe submission and completion queues may not get initialized to zero(SCGCQ00486032)
 -NVMe Encapsulated Path Fixes(SCGCQ00493331)
 -NVMe: IO timeouts or fault after several command failures(SCGCQ00495200)
 -SAS3.5: In Cascaded Switch setup the parent device bridge number is always zero(SCGCQ00495900)
 -PL holds more than 128 frames while formatting vd created from 4 AHCI drives.(SCGCQ00498947)
 -Dauntless Fault 6001(SCGCQ00499669)
 -NVMe: 60D fault on encapsulated request failure(SCGCQ00504708)
 -Fault 6004 during Task Management Tests to AHCI devices(SCGCQ00505710)
 -PL: Task management aborted IO search may return faulty information(SCGCQ00524975)
 -D065 fault occurs during port enable with AHCI devices attached(SCGCQ00531377)
 -SAS3.5FW: PL: PCI: Use PliRegister for device registration instead of hardcoded value(SCGCQ00558177 )
 -Fault 6230 running Clear Task Set TM(SCGCQ00559714 )
 -Build errors (SCGCQ00568553 )
 -NVMe: Fix several mode page related bugs(SCGCQ00570058)
 -PCI command frame is tried to be obtained from non PCI firmware IO(SCGCQ00590513)
 -1901 fault when a FORMAT command issued to an AHCI target(SCGCQ00601939)
 -Some of the declarations and typedefs in pliDefs.h not conforming to code standard(SCGCQ00606222)
 -Incorrectly named PLI_RUNTIME_CONFIG flag definitions(SCGCQ00606259)
 -Delay timers are not used properly for some FPGA applications(SCGCQ00610868)
 -Few minor backend PCIe related changes(SCGCQ00613904)
 -Firmaware fault 0x26B5 observed when sending IOUnit Control Message with OPERATION SAS SEND PRIMITIVE to PCIe switch dev handle.(SCGCQ00619486)
 -Bug Fixes in NVMe Encapsulated IO Path(SCGCQ00621303)
 -NVMe: IEEE to PRP translator rollback issues(SCGCQ00626787)
 -Dauntless FPGA fault 4308 during 'init' FW 00.250.27.01(SCGCQ00654346)
 -Intruder/Ventura: Double define for set/get SAScore # could have 1 layer removed(SCGCQ00660419)
 -PL: Abort Task may fault if NVMe Init is pending(SCGCQ00669749)
 -Dauntless minimal build failure(SCGCQ00670226)
 -Fault xD204 when posting diag buffer(SCGCQ00671364)
 -Continuous plTxCtxMgrHighInterrupt on SASCORE1 attached SATA drive(SCGCQ00671683)
 -Dauntless FPGA: EF04 fault running IO and Abort Task TM to AHCI(SCGCQ00676418)
 -Intruder: Fix unprotected loop in plTargetProcessHardReset((SCGCQ00678870)
 -Intruder: Fault 0x4308 on SMP timeout in SMP Response Callback(SCGCQ00678877)
 -PL: IO Count not decremented correctly for encapsulated commands, resulting in a 0x6001 fault(SCGCQ00680608)
 -PL: Fault 0x4302(SCGCQ00682071)
 -Intruder: PL Fault 0x4307 while doing init(SCGCQ00682911)
 -Intruder: Fix plSataPassthrough.c to account for Multi Core work for plSataPassThrough.c(SCGCQ00684321)
 -4307 fault seen during PL initialization(SCGCQ00686953)
 -Intruder & Ventura: Fix plFpeHandleCompletorErrorInt() to compile for Ventura(SCGCQ00687645)
 -SCSI READ (16),(12),(10) command to an AHCI device not receiving LOGICAL BLOCK ADDRESS OUT OF RANGE(SCGCQ00690183)
 -Fault xD105 running IO to SATA devices(SCGCQ00692817)
 -SECURITY IN SCSI command timing out to AHCI device due to incorrect SATL translation.(SCGCQ00693169)
 -Intruder FPGA: 0x26B5 fault seen when accessing RxEEDPBuf of any SAS core(SCGCQ00698951)
 -Firmware faults when downstream port of attached PCIe switch sends uncorrectable fatal error for malformed TLP it received from connected device.(SCGCQ00699010 )
 -Ventura: Processor abort when initializing Txdma buffer(SCGCQ00700796)
 -Backend PCIe: AHCI spinup may fail(SCGCQ00702640)
 -(Sata Only) Scsi LOG SELECT to Sata drive fails when parameter list length is non(SCGCQ00702703 )
 -Debug code was inadvertantly checked in which causes phy layer initialization to not work for second core or phys > 0.(SCGCQ00705330 )
 -NVMe: IoCount not decremented on non read write encapsulated NVM command failure(SCGCQ00705495)
 -Fast path IOs are timed out.(SCGCQ00706941)
 -Dauntless FPGA: D205 fault when posting a host trace buffer during IO(SCGCQ00707374)
 -Intruder: 265D fault when FW controllered Spinup Feature is enabled in FW(SCGCQ00710078)
 -FIS Porting: Fix Issues with SAS Exception Queue Setup(SCGCQ00710464)
 -Fix issues in PL diagnostic code(SCGCQ00710497)
 -Intruder FPGA: 0x6230 Fault during whole port glitches (SCGCQ00711100)
 -Drive SAS Address in gplControllerPhy structure being overwritten, resulting in drive loss(SCGCQ00712955)
 -265D fault on AHCI spinup (SCGCQ00714811 )
 -NVMe devices may fail to initialize((SCGCQ00715163)
 -Intruder: Don't display all message frames for pl dbg register dump (SCGCQ00716613)
 -PL:Overlapping 0x61xx Fault codes (SCGCQ00716742)
 -gplControllerPhy indexing should be per chip phy, not core phy (SCGCQ00718620)
 -Fault xD015 seen running IO when Task Management occurs (SCGCQ00718761)
 -Ventura: Device does not show up when connected to phy 1.(SCGCQ00718771)
 -Fast path completor engine throws error for IOs that don't have appropriate flags set in fast path mid state table (SCGCQ00719653)
 -PL SATL: Fault 6201 When Sending SCSI Security Protocol In Command to SATA Drive(SCGCQ00721212)
 -Ventura: wrong SAS core address in FPE(SCGCQ00722553 )
 -PL (Ventura): Fast Path IOs submitted through a message should not immediately be submitted to the Fast Path Engine for non PCIe devices(SCGCQ00724355)
 -Host stopping IOs to PCIe device while task management requests are outstanding to the device.(SCGCQ00724399)
 -Dauntless FPGA: fault D024 while running abort task TM.(SCGCQ00726551)
 -NVMe: devices always fail to initialize(SCGCQ00729685 )
 -Ventura: Incorrect Case in Function Parameter(SCGCQ00734961)
 -Intruder FPGA: Fault 0x584F while running CM Block Move and Task Management Test to two direct(SCGCQ00735409 )
 -Intruder FPGA: Fault 0x5828 while power cycling random expanders on both cores(SCGCQ00735635)
 -Fault 0x510B while running stress to 7 cascaded expanders(SCGCQ00736679)
 -Problems in Tx DMA single to dual context mode switch and vice versa on multi SAS core(SCGCQ00737078)
 -Dauntless: tip code appears to be broken(SCGCQ00737126)
 -Fault 0x6001 While running Task Abort to topology of only SATA Drives during I/O.(SCGCQ00740832)
 -PL: add temporary config page buffer items to gplDynamicMemory(SCGCQ00741788)
 -Ventura: Link register is not set in fault print(SCGCQ00747257)
 -Ventura: Bad merge backed out the fix in (SCGCQ00748108)
 -Dauntless FPGA: Read Error when running Medusa IO with Abort Task Set TM to NVMe drive(SCGCQ00752414 )
 -PL: uninitialized NumPhys(SCGCQ00757724)
 -Ventura: Processor abort on I/O with sense data(SCGCQ00762270)
 -Fault xD117 seen when running IO with Task Management Abort Task and Abort Task Set TMs being issued(SCGCQ00762899)
 -Fault EFF1 while running task management with fast path and non fast path devices(SCGCQ00764185)
 -Dauntless FPGA: EC38 fault upon initialization(SCGCQ00765364)
 -Fix compiler(SCGCQ00765443)
 -Ventura: New PCIe Discovery implementation stuck in direct attached state.(SCGCQ00768164)
 -pliProtos.h contains 2 internal protos for sim/fake IO(SCGCQ00769245)
 -Intruder: Fix the spinup register read to get the spinup group for multi SAS core.(SCGCQ00771113)
 -FW Controlled Spinup: Repeated interrupts occur for unhandled spinup requests beyond max targets allowed for a spinup group(SCGCQ00771115)
 -pl: Unexpected usage of 64 bit math lib in plPciNvmeFillInquiryData((SCGCQ00771167)
 -pl: backend PCIe: couple of PCIe IO Unit Page 1 issues(SCGCQ00776230)
 -Intruder FPGA: Fault 0x584F running Block Move and Task Management from Core 0 to Core 1(SCGCQ00776360)
 -NVMe: EF08 fault during non target reset task management(SCGCQ00776392)
 -Intruder FPGA: Fault 0xC00C while running Initiator and Target Mode on Intruder Cores(SCGCQ00776417)
 -Intruder: Incorrect parameter is getting passed in plGetQuadPhyIndxFromCorePhyNum((SCGCQ00785455)
 -PL: incorrect logic in determining setting for CloseOptimize(SCGCQ00786213)
 -Intruder FPGA: 0xD20C Fault While Running Stress From 4 Initiator System to Target Mode FPGA(SCGCQ00791373)
 -AHCI D300 fault during a non(SCGCQ00792570
 -Intruder FPGA: Fault 0x7400 Running Stress and Expander Resets in I/T Setup(SCGCQ00793228)
 -Ventura: PCIe Discovery problems observed with device reset test.(SCGCQ00793909 )
 -NVMe: D300 fault on malformed chain to PRP list SGL(SCGCQ00794103)
 -Fault 6016 while running clear task set TM to NVMe device(SCGCQ00795690)
 -pl: backend PCIe: special case cascaded switch issues(SCGCQ00799848)
 -Dauntless FPGA: D024 fault while running TMs in Linux(SCGCQ00800431)
 -Intruder FPGA: Fault 0xC00C while running IO stress and expander resets in Initiator/Target Setup(SCGCQ00800478)
 -Intruder: Link event codes are not properly converted from hardware to MPI values(SCGCQ00806568)
 -Backend PCIe: FxCore error bit clearing(SCGCQ00813507)
 -Dauntless FPGA: Data Corruption reported on multiple tests(SCGCQ00813954 )
 -Fault D300 when issuing Scsi SecurityProtocolInOut command to an AHCI device.(SCGCQ00815172)
 -FW Controlled Spinup: Fixes in spinup request entry cleanup(SCGCQ00815536)
 -Dauntless FPGA: IOs being aborted during "straight IO" test(SCGCQ00815660 )
 -Intruder: incorrect version number in PL library builds(SCGCQ00818770)
 -Ventura: Sascore 1 links do not come up(SCGCQ00822145 )
 -pl: backend PCIe: AHCI init timing issues(SCGCQ00822349)
 -Dauntless FPGA: EFF1 fault on init(SCGCQ00822595)
 -Remove Aladin Reset Code in PL Start of Day(SCGCQ00823445)
 -Ventura: Phy register addressing is incorrect(SCGCQ00825050)
 -FPGA: Fault 0xD34C on intitializtion with SATA drive attached(SCGCQ00825828)
 -Dauntless FPGA: Fault D065 during CM init to AHCI drive in non(SCGCQ00827582)
 -Ventura: "iop arm table" crashes due to missing string(SCGCQ00829296)
 -Ventura: backend PCIe: fix some issues encountered upon merge of SCGCQ00829039.(SCGCQ00830809)
 -Ventura: Fix PCIe discovery out-of-resource handling(SCGCQ00831671)
 -Change define used for SED POM size to true 128MB size, added new define for emulator.(SCGCQ00832044)
 -Ventura: PCIe discovery (SCGCQ00832125)
 -Use the address, not value of register to set base for the IOA shadow Register PIM(SCGCQ00832543)
 -Fault 0xD63C when trying to create/use an 8K PIM(SCGCQ00832557 )
 -Fix code for handling FxCore Requester and Completer errors as per comments in review.(SCGCQ00834567 )
 -Intruder A0: 0x4330 Fault When Multiple SATA Drives Are Attached Simultaneously(SCGCQ00834931)
 -PL: Fix SATA Function so that it's More Straightforward (SCGCQ00835199)
 -PL: Update link layer register that should be programmed differently for intruder(SCGCQ00835524)
 -A device initialization call was being made for all end devices, that doesn't apply to SED(SCGCQ00836070) 
 -Ventura: backend PCIe: host bringup fixes, part 1(SCGCQ00837192)
 -Intruder: Disable DMA Engine Overrun error for Intruder and beyond based on Hardware feedback(SCGCQ00839532
 -Intruder A0: Drive information is not removed completely from controller when enclosure is detached(SCGCQ00839951)
 -PL: Fault 0x430B seen when connecting enclosure to upper quad(SCGCQ00840596)
 -PL: Fault d060 observed when running IOs with link_reset Task management command in a loop(SCGCQ00840603)
 -Ventura: SAS_R31_HACK doesn't always compile correctly(SCGCQ00841016)
 -Fault 0x7C54 seen during I/T switching(SCGCQ00843298)
 -Intruder A0: Fault 0x5872 during I/T Switching(SCGCQ00844812)
 -Ventura: backend PCIe: fix some scattered bugs(SCGCQ00845780)
 -Ventura: Fault during pl debug dump(SCGCQ00848069)
 -Cleanup IOP Access to gplPtrPdbRegs(SCGCQ00849748)
 -IOP firmware accesses PL firmware directly without going through PLI(SCGCQ00849749) 
 -Ventura: backend PCIe: EC82 fault on NVMe TM with specific vendor AHCI drive present(SCGCQ00849829)
 -Build problem when firmware controlled spin up is disabled(SCGCQ00850667)
 -Ventura: several faults occur with mixed SAS and NVMe IOs(SCGCQ00851227)
 -PL: SATA Command getting stuck in PL after issuing Start Stop command with immediate bit set(SCGCQ00851287)
- Intruder A0: Fault 0x6111 during I/T Switching(SCGCQ00852833)
- 0x265D Fault while running mixed PCI and SAS IOs(SCGCQ00853311)
 -Intruder A0: 265D fault observed during link reset task management with IO (SCGCQ00853930)
 -Ventura FPGA: Fault 0x681E encountered during overnight run using RedEye(SCGCQ00854322)
 -PL: Fault 0x430B seen when connecting several enclosures(SCGCQ00854697)
 -TLB exception when showing PL ring buffer(SCGCQ00855026)
 -PL: Limited to 16 PHYs on one SGPIO bus (SCGCQ00855674)
 -Firmware Controlled Spinup: Spinup group with multiple drives may never be allowed to spin(SSCGCQ00855675
 -PL: Format command doesn't work on SATA drives when FMTDATA bit is 0(SCGCQ00856366)
 -PL: Unmap command fails with Check condition Invalid field in parameter list(SCGCQ00856369)
 -Firmware Controlled Spinup: Cable Pull Tests with SPL(SCGCQ00856501)
 -Ventura: Target IOs in a persistent connection hang(SCGCQ00856874)
 -Ventura: Target mode clearing of midvalid should be workaround(SCGCQ00857062)
 -Ventrura: Accessing Mode Sense pages for NVME Results in alignment fault(SCGCQ00857247)
 -Firmware Controlled Spinup: GroupSpinningCount May Not Be Adjusted Correctly for Legacy SAS Drives(SCGCQ00858694)
- PL: Fault 0x7C54 seen when running IO with hard resets and config reads(SCGCQ00859243)
 -Disable FwSpinupAck print for periodic notify(SCGCQ00860244
 Intruder A0: WriteBuffer in 'Write Data' mode executes with good status when Bufferid=0 and Buffer Offset=non(SCGCQ00860452)
 -Intruder A0:WriteBuffer in 'Write Data' mode executes with good status when Bufferid=0 & Param List length != 512.(SCGCQ00860454)
 -Ventura FPGA: 0x265D fault during Max topology PCIe discovery(SCGCQ00861693))
 -Ventura FPGA: Faults observed when powering off/on populated PCIe switch(SCGCQ00861780)
 -Ventura: IOA Cuda Timer Overflow issues(SCGCQ00862001)
 -Ventura: NVMe: PL translated non read write commands may time out(SCGCQ00862206 )
 -Handle FxCore Requestor Disabled Exception that follows Submission queue timeout exception for NVMe device(SCGCQ00864142)
 -Number of Spinup Entries Should Be Reduced(SCGCQ00864345)
 -PL: SFF(SCGCQ00864613)
 -PL: Minor modification for the 5872 workaround(SCGCQ00865238)
 -Ventura: backend PCIe: FxCore may generate invalid exception 0xFF(SCGCQ00865819)
 -Current Config of "pl status" command output is not clear.(SCGCQ00866270)
 -Ventura FPGA: Fault 0x6230 while running IOs and issuing target reset task managements(SCGCQ00866294)
 -Ventura: When processing SAS core interrupts, sometimes status register indicates no active interrupts(SCGCQ00866361)
 -Ventura: backend PCIe: backend completion timeouts occur when the FPGA is heavily loaded(SCGCQ00866758)
 -Change the naming of library defines DEBUG and TARGET to avoid conflicts with customers(SCGCQ00866760)
 -Ventura FPGA: Fault 0xD102 after several hours of mixed(SCGCQ00867258)
 -Ventura FPGA: 6001 fault starting IO(SCGCQ00868569)
 -PL: SATA I/O times out right after a Start Stop Unit command with immediate bit set to 1(SCGCQ00868995)
 -Ventura: Structures not being put in IOA Local RAM(SCGCQ00869574)
 -Ventura FPGA: Fault 0x61A6 while running IOs and issuing target reset task managements(SCGCQ00870402)
 -PL: A pointer needs to be reinitialized to prevent out of bound access(SCGCQ00871248 )
 -PL: Missing break statement in PL control request handler(SCGCQ00871320)
 -Ventura FPGA: 0x6C02 during Random TM and IOs(SCGCQ00871341)
 -Ventura: Fault 0xd102 observed during IO + TM testing on direct attached NVMe drive(SCGCQ00871397)
 -Ventura: backend PCIe: target reset to AHCI device times out(SCGCQ00871680)
 -PL: Fix bad coding style in plGetSpinupGroup(SCGCQ00871683)
- Ventura: Fault EC8A on async removal of switch attached PCIe target(SCGCQ00871718 )
- Ventura: firmware path IOs may time out(SCGCQ00871792)
- PL: Check Return Status of Memory Move Function(SCGCQ00871805)
 -Root complex port mark enabled even if all the phys are disabled in nvdata(SCGCQ00871999)
 -PL: Firmware does not fill in SAS IO Unit Page 16 Timestamp field correctly(SCGCQ00872141)
 -Ventura FPGA: 0x1202 fault with IOs and Random TMs(SCGCQ00872717)
 -Intruder A0 : Fault 0x430b while Discovery in Target Mode setup(SCGCQ00873776)
 -Ventura: backend PCIe: fault occurs with AHCI IOs in non(SCGCQ00877613)
 -Ventura: backend PCIe: 1901 fault on AHCI command failure(SCGCQ00878246)
 -NO_FPE_HW compile option updates(SCGCQ00879534)
 -Ventura: backend PCIe: issues related to Axi2Shell error handling(SCGCQ00880773)
 -PL: Fault 0x7400 with Modified Runtime Configuration for Expander(SCGCQ00880957)
 -Ventura: backend PCIe: (AHCI) firmware hangs on translated SGL full of 0(SCGCQ00881278)
 Transition from MPI SAS IO Unit Control request to IO Unit Control request coding incomplete(SCGCQ00883285)
 -Ventura FPGA: IO stopping during stress(SCGCQ00883428)
 -Ventura: PCIe SW error handling tweaks(SCGCQ00883994)
 -PL faults on PNPR Error Syndrome interrupt that is hit during link glitch test(SCGCQ00885805 )
 -Ventura: port some FPE start path fixes to PL Light(SCGCQ00886430))
 -PL: Spinup control has incorrect error guard(SCGCQ00886966)
 -Ventura: NVMe Serial Number Not Copied From Drive(SCGCQ00887003)
 -Ventura FPGA: 'pl status' doesn't reflect hot removal of a NVMe Drive connected to a switch.(SCGCQ00888012 )
 -Ventura: RingBuffer Print Error of Device's IO Count(SCGCQ00888114)
 -Ventura: port some FPE start path fixes to PL Light(SCGCQ00888286)
 -Unable to issue Start Stop Unit to a sata device(SCGCQ00890804)
 -Tiger/Stryker: Fix tiger firmware build and build all issues(SCGCQ00894132)
 -Tiger/Ventura: change FXCore init delay to coding standard format(SCGCQ00894651)
 -Ventura: backend PCIe: FPE MaxPcieCoreNum is incorrect(SCGCQ00895285)
 -Ventura: Inconsistent use of plGetDmaTransQueueEntry((SCGCQ00897149)
 -PL init taking excessive time(SCGCQ00897938)
 -Ventura FPGA: Fault xEF09 during phy cable glitch on NVMe direct attached drive(SCGCQ00908689)
 -PL: Update internal files to latest specifications(SCGCQ00913173)
 -Ventura: Invalid Q Entry for SAS(SCGCQ00915170)
 -Ventura: backend PCIe: reformulate switch WWID(SCGCQ00915987)
 -Ventura: Additional settings for hw workaround in SCGCQ00915170 (SAS(SCGCQ00916873)
 -Not able to link SASFW_Ventura_Phase_0.6 00.250.49.00 Pl library(SCGCQ00921951)
 -Fault 0xd332 is hit while translating a SCSI IO that shares SGL with other IO or IOs(SCGCQ00923195 )
 -Ventura: Fault 0x1D02 during force link down of DA NVMe device that failed init(SCGCQ00924457)
 -IO count in a Rare case for a PCI Device is Not Decremented.(SCGCQ00925182)
 -Fault 0x4330 seen if an SMP Passthrough causes a TxDMA error(SCGCQ00927711)
 -TigerStryker: Fix pl library build for liger release(SCGCQ00930678)
 -PL: Optimize FPE(SCGCQ009316620)
 -PL: Ventura incorrectly stores tail pointer in head pointer(SCGCQ00932450)
 -Ventura: Tip code faults with 0xECA6SCGCQ00933078)
 -Ventura: separate reset of CSW core from PBD(SCGCQ00933765)
 -PL Ventura: MultipP bit not set in Inquiry(SCGCQ00933818)
 -Ventura: setting CSW protocol mode does handle setting HW Mode with PCIe devices(SCGCQ00934298)
 -PL: Unexpected Open Reject (Protocol Not supported) is observed from target mode(SCGCQ00934341)
 -Ventura: BUSY TIMEOUT PERIOD incorrect for NVMe drives(SCGCQ00934896)
 -PL: PL code is not supposed to use division(SCGCQ00934930)
 -Ventura: backend PCIe: value written to PDB clock enable register may be incorrect(SCGCQ00938502)
 -Ventura: Misc initial bring-up work-arounds(SCGCQ00938539)
 -PL: MPI device driver state machine is confusing(SCGCQ00938627)
 -Ventura: A0 sas phy bringup issues(SCGCQ00940200)
 -Ventura: PL should not be looking for Phy Interrupts in SASConfigRegs(SCGCQ00940270)
 -pl: SGL debug printer ignores SkipCount(SCGCQ00941786)
 -Tiger FW: Recursive 0x265D fault(SCGCQ00943006)
 -Tiger: PSB PEX hardware initialization code requires data synchronization barrier(SCGCQ00944153)
 -Dauntless Builds Not Completely Removed.(SCGCQ00944759)
 -Tiger: Firmware init causes 0xED00 fault(SCGCQ00944868 )
 -Tiger: Fault 0x2667(SCGCQ00945971)
 -Tiger: Fault 0x430A on init(SCGCQ00947159)
 -Ventura: backend PCIe: IOs to an NVMe device fail if they are larger than the device's MDTS(SCGCQ00948252)
 -Ventura: SATA Init Always Fails(SCGCQ00948281)
 -Trace buffer has garbage at SOD(SCGCQ00948938)
 -Ventura FPGA: Hitting x430A fault during Hot Plug less than 3 seconds(SCGCQ00949143)
 -Ventura: PL Status command does not display SAS address(SCGCQ00949973)
 -Ventura: Data abort when booting harpoon image(SCGCQ00950072)
 -Tiger: PCIe discovery and configuration fixes(SCGCQ00950664)
 -Ventura: Fix the PBAM Inframe core activity selection mapping(SCGCQ00954393)
 -Ventura: backend PCIe: need to configure link width in the DM Core before bringing up the link(SCGCQ00954714)
 Ventura: backend PCIe: fix a couple of NVMe related issues(SCGCQ00979716)
- Ventura: PCI links get reset when in END POINT mode(SCGCQ00981060)
- PL: 0x430B firmware fault on a 9305(SCGCQ00981252)
- Ventura: backend PCIe: intermittent IO timeout with fast path plus firmware breakup path IOs(SCGCQ00981260)
- Ventura: backend PCIe: PL NVMe read/write breakup IOs fail badly(SCGCQ00983674)
- Tiger: Silicon build not working with new Tiger CCR header(SCGCQ00987111)
 -Ventura: Remove Tx phase slip setting workaround(SCGCQ00987742 )
 -Ventura A0: Devices are intermittently showing up or not present at all(SCGCQ00987752)
 -Ventura: Total IO count in pl status not incremented for SAS/SATA devices (SCGCQ00988653)
 -PL: Firmware is hung in infinite loop during device handle pre(SCGCQ00990651)
 -Ventura: backend PCIe: hang may occur when a backend PCIe link goes down(SCGCQ00991209 )
 -SAS IO Unit Page 1 (SCGCQ00992048)
 -Ventura: Switch to parity initialization work(SCGCQ00992931)
 -Ventura: backend PCIe: ED08 fault occurs with backend PCIe enabled and phys disabled(SCGCQ00993194)
 -Ventura: backend PCIe: fault occurs when backend PCIe support is disabled in NVDATA(SCGCQ00993887)
 -Ventura: Invert PBAM GPIO LED data polarity(SCGCQ00993950)
 -Ventura: Fix build all error(SCGCQ00995348 )
 -Ventura: backend PCIe: fault occurs on recoverable PDB init failure(SCGCQ00995568 )
 -Ventura A0: Power Management functionality for Partial or Slumber capable SAS or SATA devices not enabled(SCGCQ00997277)
 -Ventura: backend PCIe: link always comes up with maximum width(SCGCQ00997661)
 -Ventura: recursive fault on fault with backend PCIe support disabled at runtime(SCGCQ00997681)
 -Tiger: Data corruption reported for NVMe IOs 8KB and higher(SCGCQ00998637) 
 -Devices not getting discovered with PL version 0.250.54.77(SCGCQ00999505)
 -Ventura: backend PCIe: 265D fault on 'pl dbg' with backend PCIe support disabled at runtime(SCGCQ00999664)
 -0x5841 Fault occurs while running destructive domain testing(SCGCQ01000131)
 -Ventura: Fault 265D occured while trying to read SAS IO Unit page 16(SCGCQ01000229)
 -Ventura A0: 7C55 fault when performing port_break between HBA and expander cable break with 4K IO size(SCGCQ01001139)
 -Ventura A0: Fault 0x6108 while running TMs & SMP commands(SCGCQ01001258)
 -Adapter fails to respond to diag reset while faulted(SCGCQ01001666)
- Tiger FPGA: Fault 0x6230 during initialization(SCGCQ01001972)
 -Ventura: EC22 fault occurs after a SASCore transmit hardware interrupt(SCGCQ01002020)
 -Tiger: IO failure with two or more NVMe drives.(SCGCQ01002855 )
 -Tiger FPGA: 0x2671 during IO and Init(SCGCQ01003082)
 -0x430b fault is seen while running IOs & link resets on Ventura HBA Phys(SCGCQ01004126 )
 -Ventura: backend PCIe: fault occurs when link configuration is invalid(SCGCQ01004373)
 -PL: Firmware doesn't compile with MPI Device support enabled(SCGCQ01004853)
 -Firmware crashed with PL Fault d073 when running IO on multiple R1 VDs(SCGCQ01004990 )
 Ventura: backend PCIe: need to verify that the page size used by PL is supported by the device(SCGCQ01005076)
 -Ventura A0: Fault 0xD10D when running I/O's to Target mode controller(SCGCQ01005338)
 -Ventura: backend PCIe: need to take PDB testmux hardware out of reset at start of day(SCGCQ01005342)
 -PL (Ventura): Inquiry EVPD 0x83 is not unique for some devices(SCGCQ01007567)
 -Tiger FPGA: Firmware faults with 0xD20F when posting trace buffer(SCGCQ01007596)
 -PL: Memory corruption when connected to downstream MPI device(SCGCQ01010196)
 -0x6001 Fault while running port glitch cable break tests.(SCGCQ01010466)
 -Ventura: Remove Prevail references(SCGCQ01011088)
 -Tiger FPGA PL: Link layer is sending out old sas addres after swapping out a drive.(SCGCQ01012066 )
 -PL: IO to MPI SED attached devices fail(SCGCQ01012207)
 -Ventura SED handling: Fixes to handling to SED attach devices(SCGCQ01012504)
 -Ventura PL: Incomplete error handling in MPI SED event handling code(SCGCQ01013576)
 -Ventura: Sequential Writes Performance Very Low (SCGCQ01013913)
 -IOs stop running TM injection test(SCGCQ01013927)
 -PL: SED DevHandle translation code incorrectly translates DevHandles(SCGCQ01013965)
 -Intruder: SAS device removal is not updated in configuration page(SCGCQ01014609)
 -PDB MEM BARs not updated properly when NVDATA settings are used as a fallback method to BAR(SCGCQ01014618)
 -Ventura: backend PCIe: memory sync is missing from a couple of IO start paths(SCGCQ01014812)
 -Ventura: backend PCIe: couple of issues related to resource configuration(SCGCQ01014981)
 -Ventura PL: Remove deprecated MPI SED Initialization step(SCGCQ01015440)
 -Ventura: Sas/IOA deadlock(SCGCQ01016130)
 -Ventura: backend PCIe: workaround for lane breakage on backend PCIe link down(SCGCQ01017060)
 -Tiger FPGA: Fault 0xEE13 while initializing an MPI device with a non(SCGCQ01017450)
 -Ventura A0: Performance Counters not working as expected(SCGCQ01018523)
 --Ventura A0: 583D fault when running Port Glitch cable break between expanders(SCGCQ01018657)
 -Marlin: backend PCIe: various bringup issues(SCGCQ01018771)
 -Ventura: backend PCIe: lanes may fail to come up(SCGCQ01018960)
 -Ventura: backend PCIe: allowed cascaded switch count should be 1(SCGCQ01019728)
 -Ventura: backend PCIe: EC0D fault on link drop during NVMe init(SCGCQ01019754)
 -Tiger FPGA: New Task File Interrupt being hit (0x6815 fault)(SCGCQ01020348 )
 -Ventura: NVMe: Supported WRITE LONG flags mismatch the current SCSI(SCGCQ01020474)
 -Ventura: backend PCIe: on disable, need to deconfigure backend PCIe sooner(SCGCQ01021385)
 -Tiger FPGA: Link status change event causing 0x6230(SCGCQ01022790)
 -Ventura PL: SED DevH translation still doesn't translate correctly(SCGCQ01023107)
 -Tiger FPGA: 0xEF20 fault with NVMe in Stryker mode(SCGCQ01024099)
 -Ventura A0: Fault 0xD091 while creating partitions during Fast path enable & disable test (SCGCQ01025048 )
 -Fault 0xD101 observed during IO stress while sending a read command to a SATA drive with LBA out of range(SCGCQ01025055)
 -PL: Tiger faults with code 0xEC86(SCGCQ01025380)
-Ventura PL: Handle secondary path-completion interrupt beating completion entry writes(SCGCQ01025621)
 -Ventura: NVMe: SGL translation fails if DDR flag is set in an IEEE chain element( (SCGCQ01026956)
 -Ventura: NVMe: SGL translation may fail with unaligned first SGE(SCGCQ01026995)
 -Ventura PL: Invalid reply message and fault 0x1902 seen with SED attached IO(SCGCQ01027169 )
 -Ventura: several issues encountered during non fast path IO and TM testing(SCGCQ01027346)
 -Ventura: backend PCIe: EC30 fault on surprise link down(SCGCQ01027780)
 -(SATA Only) Fault 0x4203 observed on running heavy IOs to SATA drives with IOs causing firmware exception.(SCGCQ01029537)
 -Ventura Tiger: Task Management fails to abort IOs in firmware Pend List for SED attached devices(SCGCQ01029633))
 -Ventura A0: Pl faults with fault code 0xd10f running SAS IO(SCGCQ01031904)
 -Ventura Tiger: 0x265d Fault while running Task Management Test to tiger attached SATA drive(SCGCQ01032769)
 -Tiger Ventura: Remote MPI device (SED) beyond first found would get incorrect IO completion Q and Tail pointer addresses(SCGCQ01032856)
 -PL: Firmware faults with code 0x265D during PCIe enumeration(SCGCQ01033445)
 -Ventura: backend PCIe: several issues occur during link breaks behind a switch(SCGCQ01033463)
 -Tiger PL: Internal switch is not being properly hidden from the host(SCGCQ01034219)
 -Ventura A0: Fault 0x620E on NVMe drive pull when I/O stress is running against all drives(SCGCQ01034404)
 -Tiger FPGA: Fault 6001 is seen When run IO + TM on SAS/SATA behind expander(SCGCQ01036331)
 -Mismatch in WWID returned in PCIe Device Page0 and PCIe Device Status Change event.(SCGCQ01037372)
 -Tiger Ventura: Incorrect reply descriptor Q address used for any SED beyond the first one(SCGCQ01038414)
 -Fault 0x5881 due to not handling a new interrupt(SCGCQ01038536)
 -Tiger Ventura: Fault when running IO to multiple Tiger/SED attached drives(SCGCQ01038568
 -Ventura: backend PCIe: 61A5 fault on frequent errors involving an NVMe device(SCGCQ01039087
 -Ventura Tiger: Fault 0x7008 while initializing firmware with an expander attached topology behind tiger(SCGCQ01039193)
 -Fault during Aladin CLI commands.(SCGCQ01040069)
 -Ventura Tiger: Fault 0x265d when forwarding Internal Abort Task for a MID to an SSP Target from a downstream Tiger to host(SCGCQ01040995 )
 -Tiger FPGA: Abortable IO timeout are seen during IO and TM on SAS/SATA behind expander and IO on direct attached NVMe(SCGCQ01043036)
 -Ventura: backend PCIe: fix some issues with the SERDES link down workaround(SCGCQ01043043)
 -PL returns incorrect PCI address returned for IOP mapped resource element.(SCGCQ01043532)
 -Fix FW DMA of trace data when the Host posts a Trace Buffer(SCGCQ01043735)
 -Tiger: New code using non standard function header style(SCGCQ01043926 )
 -Tiger FPGA: Fault 6230 is seen during IO and TM on direct attached SATA(SCGCQ01045612)
 -Ventura: backend PCIe: EC30 or EC70 fault on direct attached link down(SCGCQ01046534)
 -Ventura A0: NVMe drives missing after few Port glitches between HBA and PCIe Switch(SCGCQ01046704)
 -Device Specific parameter field of mode page header has incorrect value for Mode Sense command send with DBD bit set for SATA and NVME devices(SCGCQ01047156)
 -Tiger: IO stops to devices after link reset, drives either get removed or IO times out.(SCGCQ01047475)
 -IOP: Firmware faults with 0x265D when issuing a TM to a device behind a SED which is no longer connected(SCGCQ01049418)
 -PL fault 0xd0d0 is seen when IOA hardware interrupts for invalid completion entry(SCGCQ01052174)
 -Ventura A0: Running all Task Management types to only PCIe devices results in fault 0xECA3(SCGCQ01053437 )
 -PL does not map IOP requested resource to backend PCI space with AXI bus attribute and faults(SCGCQ01054900)
 -Ventura with Tiger devices attached and Fast Path disabled in IOUnit 1 results in x7008 fault on initialization(SCGCQ01056872 )
 -Ventura: backend PCIe: PL rejects NVMe device with the maximum supported BAR size(SCGCQ01057661)
 -Ventura: Single/Dual context mode not set correctly(SCGCQ01057740)
 -Ventura: backend PCIe: need to set a Gen3 related control bit in backend PCIe hardware(SCGCQ01058243)
 -Ventura: backend PCIe: configure root port Max Read Request Size(SCGCQ01058260)
 -Ventura: FW events are sent in incorrect order when DA SATA drive is hot removed(SCGCQ01059293)
 -Ventura: 8 LUN Target Using Linux Driver Performs 10% or more slower than previous SAS3 products(SCGCQ01060022)
 -Asynchronous External Abort during SOD. Found during COL cycles(SCGCQ01060269)
 -PL: Handle plSMPPhyControlSend() return status(SCGCQ01061458)
 -Tiger: Improve DPC handling(SCGCQ01062268)
 -PL: Some error conditions not logged(SCGCQ01063603)
 -Broadcast Interrupts Cannot be Masked(SCGCQ01064110)
 -Ventura: backend PCIe: various faults occur after a short link glitch(SCGCQ01064269 )
 -Ventura: backend PCIe: reading config space for debug may break other PL subsystems(SCGCQ01065697)
 -Tiger: Fault 0x430B when unregister is attempted for an Ventura DevH for a Tiger attached drive(SCGCQ01066917)
 -Tiger: Tiger Attached NVME drives did not have Fast Path prints turned on for the Ventura instance of the device(SCGCQ01066922)
 -Ventura: 265D fault occurs when the 'pl pci prot' debug command is used(SCGCQ01068102 )
 -Ventura: Target stalls after many hours operating at 700K+ IOPs(SCGCQ01068910 )
 -NVMe: Allocation Length field of SCSI commands is not handled properly for NVMe drives.(SCGCQ01069397)
 -Ventura: Aladin CLI causes system lock up when running on Crusader(SCGCQ01069804)
 -(SATA Only) Allocation Length < 16 Bytes for REPORT LUNS Command is not Handled Properly for SATA Drive(SCGCQ01070183 )
 -If SATA_FIS_PORTING feature complied out, FxCore exception Queue will be sized to 0(SCGCQ01070394 )
 - SCSI Read Capacity - 16 processed successffully for incorrect service action field(SCGCQ01070692 )
 -SMR SATL: SCSI VPD pages updated with Peripheral Device Type of 0x14 for SMR Host Managed ZAC drives(SCGCQ01070850)
 -For NVMe drives mode sense command failed for PAGE CODE=0x3F and SUB PAGE CODE=0xFF(SCGCQ01070881)
 -PL: SATL: With VALID bit set INFORMATION field in Sense data is not populated when REPORT ZONES Command fails for LBA out of range(SCGCQ01071132)
 -When processing IOs with partial DIF, IOs may hang.(SCGCQ01071316)
 -Tiger FPGA: Fault 0xEC92 on initialization(SCGCQ01073866)
 -Ventura A0 UTP: Fault 61A6 seen while running pcie lane breaks with IOs(SCGCQ01075089
 -Tiger FPGA: NVMe drive drops off while running a mix of IOs and Task Managements(SCGCQ01075180
 -PL: SMR: Enhance the error handling conditions of SMR ReportZones SATL(SCGCQ01077555
 -Tiger FPGA: Ventura 0x6060 during TM to NVMe(SCGCQ01080912
 -Ventura: backend PCIe: PCIe link associated with root port 0 sometimes fails to come up(SCGCQ01082753
 -Ventura Tiger: Do not configure completion time limit for MPI devices(SCGCQ01083308
 -Ventura Tiger: Timeouts for Internal Task Managements not set correctly.(SCGCQ01083603
 -Ventura/Marlin: backend PCIe: couple of PCIe related diag command issues(SCGCQ01084205
 -IO Timeout when running IOs and TMs(SCGCQ01085128
 -Ventura PL: 0x265D fault when initializing a SED(SCGCQ01086075 
 -PL Tiger: Fix plPciRcGetPexPortType(SCGCQ01088652
 -Tiger FPGA: NVMe drives go missing as soon as IO is started(SCGCQ01089519
 -Initialization hangs on Harpoon controller(SCGCQ01092071
 -Tiger FPGA: New PCI Link Config code causes Tiger FPGA to fault with 0xEC3D during init(SCGCQ01092288
 -Tiger PL: SGLs with DDR DLAS never complete(SCGCQ01092466
 -A 7C41 Fault occurs when an Internal IO timeout occurs(SCGCQ01093487
 -Ventura: NVMe: No INQUIRY Response Seen for NVMe Drive When Executed for Non(SCGCQ01095664
 -Tiger FPGA: 5002 Fault with tip code(SCGCQ01099808 
 -Fault 0x1901 is observed when an internal IO to a SES device fails.(SCGCQ01100151 
 -PL: SAS3416 Fault 0xD071 & D015 during the heavy I/O(SCGCQ01107033 
 -Marlin A0: Fault 0xEC30 while running NAKIncomingTLP(SCGCQ01109436
 -pl: device missing delay timer may expire too soon(SCGCQ01112033
 -PL: I/O could timeout if task management fails(SCGCQ01113324
 -Ventura: backend PCIe: add workaround for link recovery issue(SCGCQ01114258
 -Ventrua A0: PL fautl xD10F observed during SAS cable pull(SCGCQ01114603
 -Same slot number is seen for two NVMe drives with different dev handle(SCGCQ01118576
 -PL: Fault 0x5894 During System Power On(SCGCQ01120618
 -Ventura/Marlin: backend PCIe: need to toggle CfgClrDlInactive on link up always(SCGCQ01121263
 -Ventura: backend PCIe: do not disable delayed generation of DLLPs before Gen3 equalization(SCGCQ01122717
 -Marlin A0: 0xC010 fault during EEDP Initiator (SCGCQ01126480
 -Ventura: backend PCIe: need to perform PCIe related workaround for reasons other than the original issue(SCGCQ01126828)
 -Ventura B0: FPE SAS completion queue should be in ILR(SCGCQ01127400)
 -Ventura: HW/FW cycling needs to be dynamic to support A0 and B0(SCGCQ01133450 )
 -Ventura: Disable HW Workaround for SCGCQ00849789 for B0(SCGCQ01133505)
 -Ventura/Marlin: backend PCIe: work around a link down issue(SCGCQ01134422)
 -Fault xD060 seen when doing NVME glitching(SCGCQ01134928)
 -Ventura/Marlin: backend PCIe: start of day mem allocation with backend PCIe disabled(SCGCQ01136170)
 Marlin A0: Switch attached NVMe drives are not discovered from Build 73.(SCGCQ01138330)
 -pl: backend PCIe: direct attached NVMe device may go missing after a port glitch(SCGCQ01139383)
 -Ventura B0: 0xD024 fault running IO's with I/T setup(SCGCQ01139454)
 -SAS/SATA drives not discovered(SCGCQ01140463 )
 -PL: Hard/Link reset on HBA phy failing with IOCStatus = 0008 (Invalid State)(SCGCQ01146367 )
 -Direct attached SATA drives not discovered on phys associated with SAS core 1 (SCGCQ01147012)
 -Ventura/Marlin: backend PCIe: need modification to hot reset/link down workaround(SCGCQ01149992 )
 -Ventura/Marlin: backend PCIe: bad phy number used in link down workaround(SCGCQ01149994)
 -Ventura PL: IO Unit Control(SCGCQ01150524)
 -Ventura B0: Task Management errors with no exception while running IO's on I/T setup(SCGCQ01152173 )
 -Added new PL fault code and also set default 60 secs for SATA hinting timer in PL(SCGCQ01152796)
 -Marlin/Ventura: backend PCIe: various faults may occur if a link goes into recovery(SCGCQ01154122 )
 -pl: 265D fault when host booting firmware on a board with a blank flash(SCGCQ01154569 )
 -Drive slot Locate LED operation may incorrectly locate slots on Group ID supported backplanes(SCGCQ01162646)
 -Fault 0x670B seen while sending SCSI Read Buffer commands to bunch of SATA drives(SCGCQ01163838)
 -Virtual SES and DA Sep code use large amounts of stack(SCGCQ01164632)
 -PL: Usage of PL_LOGINFO_IOPI_MEMORY_MOVE_FAILURE results in invalid LogInfo being returned(SCGCQ01167339)
 -Ventura: Implement hardware workaround for SAS Training failure(SCGCQ01168045)
 -PL: Controller link does not come up after clearing phy disable flag in sas io unit page 1(SCGCQ01168258 )
 -Ventura: Incorrect Wide Port group LED data mapped for certain GPIOs(SCGCQ01170439)
 -Ventura/Marlin: NVMe: completion queue head doorbell may not be written in a couple of error cases(SCGCQ01170592)
 -Ventura/Marlin: NVMe: potential admin command timeout(SCGCQ01171130)
 -Host trace buffer does not contain expected data(SCGCQ01174473)
 -Starting Task Managements take a long time in certain conditions(SCGCQ01176191)
 -PL Fault 0xd073 is seen during certain IO load conditions(SCGCQ01180058)
 -pl: 4311 fault may occur when both SAS and NVMe are enabled(SCGCQ01186198 )
 -PL: 0x7C71 Fault During Repeated Phy Resets with Mixed SAS/SATA(SCGCQ01187303)
 -NVMe devices are not discovered with BAR Fail mode configured in Ext Mfg 44(SCGCQ01188761)
 -Ventura: backend PCIe: link recovery issues(SCGCQ01188928 )
 -Ventura: backend PCIe: NVMe devices may not show up in Windows(SCGCQ01192659)
 -Ventura: backend PCIe: link fails to come up on hot plug after device pull(SCGCQ01193756
 -PL: Fault 5814 while multipath SAS pull/push of 2 enclosures(SCGCQ01193764)
 -Ventura B0: Observed fault 0x4A00 during Phy glitch between HBA and Expander(SCGCQ01194893 )
 -Ventura: PL – PCIe Topology Polling incorrectly enabled (SCGCQ01194941)
 -Ventura B0: PL Fault 0x6001 for NVMe drives running Ios and random Task Managements(SCGCQ01196113 )
 -pl: Unexpected SAS link operation with protocol cycling enabled(SCGCQ01198352 )
 -Ventura: RxCtxMgr debug print is printing an un(SCGCQ01198393)
- PL: Incorrect phy resets(SCGCQ01199063)
- Ventura: backend PCIe: device add event is generated for a backend PCIe switch(SCGCQ01201813 )
- Ventura: backend PCIe: various issues may occur if multiple switches have the same Device Serial Number(SCGCQ01202401)
- PL: pl acm UART command displays old information when no cable is connected(SCGCQ01202502)
- Ventura B0: Expander goes missing when running port reduction between HBA and expander(SCGCQ01205651)
- Ventura: backend PCIe: switch attached NVMe devices fail to appear in OS after switch removal and add(SCGCQ01206629)
- IOs failed to host with generic open fail log info(SCGCQ01208362)
 -Fault 0xECA5 while running Stress IO's along with TMs & Fast path Enable/Disable(SCGCQ01208939)
- Ventura: backend PCIe: unable to print switch registers for debug(SCGCQ01209215)
- Ventura B0: MR FW is hitting a data abort crash during boot up and discovery(SCGCQ01210439)
- 0x670A Fault occurs while doing Port Reduction / Cable break testing(SCGCQ01210530)
- Ventura: Ring buffer print missing newline(SCGCQ01211776)
 -Ventura: backend PCIe: address pool configuration may fail in a boundary case(SCGCQ01211982)
- Ventura: PCIe Device unregister failure(SCGCQ01214268)
 -Ventura B0: PL Fault 0xD075 when re(SCGCQ01214275 )
 -Ventura B0: vSES target not getting exposed in Linux Host(SCGCQ01214419)
 - PH2 Pre-Alpha Ventura B0 - FreeBSD Driver - Eight Virtual SES entries are noted in camcontrol dev output(SCGCQ01214459 )
 -Ventura B0: pl status displays vSES for physically attached enclosures(SCGCQ01218944)
 -PL: Passthrough I/O could timeout if DST is placed in OCM(SCGCQ01219643)
- Ventura B0: vSES Target: RECEIVE DIAGNOSTIC SCSI Command in Not Failed With Expected Sense Data for Unsupported PAGE CODE(SCGCQ01220930)
 -Handle FPE IOP start queue full condition(SCGCQ01222231)
 -Ventura: backend PCIe: link recovery testing issues(SCGCQ01222761)
 -Diag Reset observed while sending TM to NVMe drives(SCGCQ01223373 )
 -Link/Hard reset IO Unit control message to a phy fails with IOC Status as invalid state.(SCGCQ01227486 )
 -PL Fault 0x6003 while powering off all the connected NVMe drives with IOs running(SCGCQ01228947)
 -Ventura B0: vSES firmware sending incorrect SCSI state while completing INQUIRY with UNDERRUN(SCGCQ01230819)
 -Ventura/Marlin: backend PCIe: build fails if a specific workaround is disabled(SCGCQ01232334)
 -Ventura/Marlin: backend PCIe: topology change event weirdness(SCGCQ01235263)
 -Ventura/Marlin: backend PCIe: target reset may time out if device is partially initialized(SCGCQ01235889)
 -Ventura/Marlin: backend PCIe: reset may not be sent to a device that is missing but present(SCGCQ01237022)
 -Ventura/Marlin: backend PCIe: EC09 or 501 fault may occur on IO error(SCGCQ01238032 )
 -Fault 0x6001 while running IOs and TMs to NVME drives with media errors.(SCGCQ01238263)
 -PCIe device page 0 field may not report devices link number(SCGCQ01239126)
 -Fault 0xe989 is seen if media errors are seen while running IOs to NVMe drives(SCGCQ01239353)
 -Data Protect Sense Key received on power up of NVME drive(SCGCQ01239795 )
 -Marlin B0: backend PCIe: enable a couple of workarounds(SCGCQ01240537)
 -Memory allocation of 5 NVME drives is required to discover 4 drives when VPP LED management support is enabled.(SCGCQ01240626)
 -Override NVMe support check for auto backplane detection to enable SGPIO(SCGCQ01240629 )
 -PL Fault 0000430b(SCGCQ01240774)
 -SAS Topology gets hung because of a firmware fault in sas3516 controller(SCGCQ01241342)
 -SSC Profile and PLL BW Selection(SCGCQ01243603)
 -Ventura B0: vSES Target: Incorrect Sense Data for REQUEST SENSE SCSI Command(SCGCQ01247631)
 -Ventura: Auto backplane detection (SCGCQ01247682)
 -pl: FPE timer may be activated for an IO that is being aborted(SCGCQ01249183)
 -PL fault 0xe989 hit with cable push/pull(SCGCQ01249805 )
 -Ventura B0: Fault 0x430B while running IOs & Hard resets of HBA Phys(SCGCQ01254319)
 -Commands after an ATA Passthrough ReadFPDMA queued command hang(SCGCQ01254357)
 -Ventura B0: Fault ec86 when Capella 2 switch with AHCI drives connected to controller(SCGCQ01254362)
 -Ventura B0: ACM : Active cables not powered on with Active cable power management enabled & threshold not hit(SCGCQ01255026)
 -pl: NVMe: D015 fault during Abort Task(SCGCQ01255908)
 -pl: backend PCIe: link failure after a hot reset is not detected by PL(SCGCQ01255930)
 -4K SATA block read error(SCGCQ01258955)
 -Ventura/Marlin: extra barrier in FPE firmware IO start path(SCGCQ01259570 )
 -Ventura/Marlin: backend PCIe: link not reinitialized after certain errors(SCGCQ01259639)
 -Marlin: backend PCIe: various faults occur when a backend PCIe link goes down(SCGCQ01261195)
 -Ventura B0: OS boot fails with latest HBA FW (02.250.02.00)(SCGCQ01261816)
 -SCSI commands issued to VSES may time out (SCGCQ01262672)
 -Ventura B0: (VSES) VSES Code cleanup(SCGCQ01264641)
 -Ventura B0: Miscellaneous vSES cleanup(SCGCQ01265824)
 -Fault 0xECA0 is hit while running IOs on NVMe drives behind Ventura(SCGCQ01266097)
 -Ventura/Marlin: backend PCIe: completion timeout disable support failure(SCGCQ01269306)
 -SAS3Ph3Alpha : NVMe drives are not getting detected in 9400(SCGCQ01276722)
 -IOMMU fault at address 0x80360000(SCGCQ01279547 )
 -pl: NVMe: CDB not printed when CDB validation fails(SCGCQ01281501)
 -Ventura/Marlin: backend PCIe: 265D, E5A2, or ECA0 faults may occur(SCGCQ01281505 )
 -Make platformtype function available to test utility(SCGCQ01282492)
 -FW goes to data abort when power cycle the enclosure.(SCGCQ01294834)
 -fw assert on Assertion failure in ../../mros/timer.c at line 196 when do cable pull or drive insert in 1st cycle.(SCGCQ01295869)
 -Implemented changes in persistence id allocation code to cover combination of up to 240 pds and 32 enclosures.(SCGCQ01297258)
 - MR-7.2: iMR 9440-8i:Hit MonTask line 662 in file ../../raid/mficmd.c rst=0 After Upgrade The Driver & Reboot The System(SCGCQ01299168)
 -Ventura: backend PCIe: EF53 fault on link down(SCGCQ01301079)
 -(NVME Only) Port enable completes before drive is detected by discovery.(SCGCQ01301777)
 -Disable firmware from flushing messages when it detects ld not unmap capable(SCGCQ01302478)
 -pl: NVMe: port enable times out if an NVMe device fails with CFS during NVMe init(SCGCQ01303837)
 -Ventura/Marlin: backend PCIe: potential unexpected EF50(SCGCQ01304678)
 -BST 7.3 (8GB) ==> Flash firmware and reboot post message showed "the maximum allowable limit of 3 enclosures"(SCGCQ013083570
 -14G:SWPT: Enclosure hotremoved and insert it back,one physical disk is missing in storage inventory.(SCGCQ01309090)
 -Overlapping Target Reset in Device Removal handling for multi path cause one of the device removal state machine to stall (SCGCQ01309469 )
 -[PL]While BGI running, reboot the system with 240LDs created, caused FW hitting DataAbortException montsk((SCGCQ01311291)
 -(SCGCQ01311300)
 - Ventura/Marlin: backend PCIe: EC56 fault on link glitch(SCGCQ013130750
 -Readjusted profile pd count to produce 240 PDs correctly(SCGCQ01315946)
 -Readjusted profile LD count to produce 240 VDs correctly (SCGCQ01315995 )
 -Due to a timing issue a hang condition may occur on cold power up(SCGCQ01316806 )
 -Consolidating CSETs from OEM stream to 7.1 Channel(SCGCQ01318925)
 -Consolidating a subset of CSETs from OEM stream to 7.1 stream(SCGCQ01318990)
 -Consolidating CSETs from OEM stream to 7.1 stream(SCGCQ01319003)
 -Consolidating CSETs from OEM stream to 7.1 stream(SCGCQ01319859)
 -CFGE- Page Read Current - SAS_IO_Unit not functional (SCGCQ01322101)
 -After a system reboot during BGI FW reports Consistency Check started instead of Background Initialization resumed(SCGCQ01324229 )
 -SCons: Doxygen Builder fails to keep track of dependencies(SCGCQ01326891)
 -MR(SCGCQ01326930)
 -Assertion failure in ../../raid/buffer.c at line 635: residualBytes==0 observed while BGI is under progress(SCGCQ01327188)
 -iMR(SCGCQ01328423)
 -PKG 465\ When a Migration starts fw eventually breaks(SCGCQ01329544)
 -Remove fw message "Clearing the led for pd: x" to make clear configuration cmd faster and less clutter in fw message output(SCGCQ01329994)
- Expander FW update fails with "The expander firmware update failed while downloading the firmware to controller" error(SCGCQ01330666)
 -Ventura: Task Management to NVMe drives may not complete(SCGCQ01330747 )
 -FW entered Exception mon_task while importing foreign PDs in loop.(SCGCQ01330764) 
 -Ventura FW is not reporting Underrun status for RW Ios in the legacy JBOD IO path(SCGCQ01331421)
 -iMR(SCGCQ01331455)
 -To close the window during which ONFI is not armed even when the data is dirty(SCGCQ01332552)
 -Fixed SAS cleanup code to skip the PCI device instances.(SCGCQ01332893)
 -MR7.3PA3: Storecli "show autopdcache" command blocks for 2min40sec during IO.(SCGCQ01332914
 -Montask after data abort exception handler was called(SCGCQ01335905)
 -Need interrupt to fire when OCM flush is complete(SCGCQ01336830)
 -Crusader: fw Assertion failure in ../../raid/ld.c at when insert pd(SCGCQ01337840)
 -FW enters an infinite loop of Exception Frame dumps if an exception is hit early boot(SCGCQ01338865 )
 -Handle underrun cases for STP reply for DISM(SCGCQ01338917)
 -fw hit cache.c when pull out NVMe pd in r0 to generated pinned cached.(SCGCQ01339902
 -High Frequency Smart Polling Disabled/ ROC temperature not udpated via OOB(SCGCQ01340066)
 -MR7.1 : MemsetECache prints fill important termlog space(SCGCQ01342196 )
 -FW502:Enclosure ID for the new PD inserted on system comes as 0xff(SCGCQ01342997)
 -Fix max patrol read drive in nvram(SCGCQ01344315)
 -Ventura: NVDATA option to ignore BP_TYPE check and force enable PCIe RefClk for NVMe backplanes(SCGCQ01349247)
 -FW not setting correct encl type and device ID for Insight(SCGCQ01349774)
 -Assertion failure in ../../dm/mpt2/mptDirect.c at line 1438: pMptRequest(SCGCQ01349932)
 -Reject firmware downgrade from 7.3 to 7.1 if active Profile is 11 (NVMe mode)(SCGCQ01349950)
 -Second Reconstruction starting but no progress(SCGCQ01351330)
 -MR_7.3_PA4 : Kill adpater observed , while creating R0 autoconfig when new drives are added to the system(SCGCQ01351674)
 -Insight drives are not always getting an enclosure ID(SCGCQ01351698)
 -MR7.3 Controller is not detected after running overnight cable pull(SCGCQ01352931)
 -Assertion failure in ../../raid/cache.c at line 7016 < !cache_is_dirty() >, while adding new drives when autopdcache is set as R0.(SCGCQ01356004)
 -WA for specific enclosure SES Command 0x1D(SCGCQ01356733)
 - Ventura MR 7.3 - Continuous prints of "C0:bypassWaitForBootMsgRetrieval: Waiting longer for boot message acknowledgement"(SCGCQ01357373)
 -MCTP workaround cannot be disabled(SCGCQ01358484)
 -MR7.3_FW:Assertion failure in ../../dm/mpt2/mptDirect.c ,while running multipath make/break and enclosure powercycle with IO(SCGCQ01359010)
 -Update PL version check(SCGCQ01360720)
 -System hangs at "Initializing FW Interfaces" with pinned cache present.(SCGCQ01361595 )
 -240VD with multipath connection ,drive management page doesn't list it properly(SCGCQ01375076)
 -Compatible profiles are not seen if enclosures with more slots are attached than supported by profile that needs to be displayed but compatible (SCGCQ01375264)
 -Data flush to drives after cache offload taking ~250 seconds.(SCGCQ01376296)
 -Context info is not cleared for each state, which can result in incorrect retry count for each state, resulting in drive dropping issue.(SCGCQ01378874)
 -Ventura MR 7.1 (SCGCQ01380062)
 -Bad drive causes system to hang on boot.(SCGCQ01381151)
 -Initiate ocr when FW enters MonTask(SCGCQ01381615)
 -Exception in accessing the c_ptr(SCGCQ01381732 )
 -Recursive call into allocWait() due to depleted MPT frame pool(SCGCQ01382543)
 -fw report more than 240 pd even controller connect less than 240 pds(SCGCQ01382851)
 - During OCR when recon is in progress, fw breaks due to exception.(SCGCQ01385063)
 -FW hangs when running a negative test case adding a 5th enclosre to one of the ports (SCGCQ01385667)
 -FW reports copy back started on SED/non(SCGCQ01387429)
 -Power glitch test (1sec +)FW broke into Megamon. EVT#Fatal firmware error: Line 939 in ../../cpu/arm/exceptions.c(SCGCQ01391376)
 -OCR causing date/time stamp to be inaccurate.(SCGCQ01391377)
 -Disks report incorrect rotational speeds(SCGCQ01391462)
 -Ventura Perf drop in SAS HDD R5 and R6 Seq. Write up to %24(SCGCQ01395996)
 -PL considers Timer Handle=0 and invalid, MR FW did not.(SCGCQ01399026)
 -Untested CSET related to tty logging flash changes went in: needs to be corrected(SCGCQ01399486)
 -MR FW: Enable RMC logging for OEM(SCGCQ01405061)
 -The Auto Config feature not present in HII(SCGCQ01406286)
 -)
 -MR 7.3: OCR is not enable by default for iMR(SCGCQ01406364)
 -Certain boards failed manufacturing screening due to Micron M83C(SCGCQ01407825)
 -Purley Server: CATERR reported on front panel LCD and SUT hang at the windows logo page(SCGCQ01410221)
 -(SCGCQ01411542)
 - MR7.3_Regression_Controller time is not picked up during bootup(SCGCQ01415608
- NVDATA: Change Default SGPIO electrical driving strength from 50 to 66 Ohm per HW team recommendation(SCGCQ01418180)
- H745MX controller hangs when Cryptographic erase operation performed on SATA SSD(SCGCQ01418745)
- Data abort exception during OCR with JBODs(SCGCQ01421427)
 -Non Data SATA FIS command fail if Passthrough flags and DMA(SCGCQ01423777)
 -Prepare ONFI Memlist to offload 8GB DDR region such that DDR size is uniformly distributed across ONFI devices(SCGCQ01428498)
 -MFCD incorrectly updated from MR ParaPage0 (SCGCQ01435763)
 -Constant print "phy 8 disabled" in tty log(SCGCQ01438991)
 -Pinned cache does not clear after discarding and server reboot(SCGCQ01442925)
 -Incorrect grammar in post message(SCGCQ01444273)
 -Check to enable Single COL Image support based on Dram size is not correct.(SCGCQ01445143 
 -Convert to HBA option is shown(SCGCQ01447834)
 -Can not change the profile back to "A" once you are in profile "B" and flash the controller to FW that does not support NVMe(SCGCQ01503509)
 -MR7.3.1 : controller reset seen while importing 32 VD foreign config(SCGCQ01506874)
 -SPV: Fault 0x0501 when drive is pulled.(SCGCQ00135004)
 -BT1680: pl: Unquiesce of TM doesn't restore subsystem id.(SCGCQ00140924)
 -Diag commands pl fpe mgrdsff and mgrdsfff didn't work, mgrds was exectuted instead(SCGCQ00144374 )
 -Gen3 TaskMgmt: x61A0 Fault After Starting 2nd TM to FPE Device(SCGCQ00145364 )
 -Fault D062(SCGCQ00145624)
 -when handling LD exceptions from Cuda, PL was not clearing FPE bit and FPEStatus(SCGCQ00146895)
 -ReadCapacity returning 0xFFFFFFFFFFFFFFF on a SATA drive reporting a 0 LBA count(SCGCQ00147027)
 -Fault 0xD091(SCGCQ00147076)
- 0xD023 fault while re(SCGCQ00147442)
- SATA Only: Fast path IOs to sata device fails(SCGCQ00147726)
- FPGA: Gen3 TaskMgmt: 0x1901 Fault On TM Completion(SCGCQ00147805)
- Device won't do Fast Path IO after hot plug/pull done (no IO running)(SCGCQ00147819)
- FPGA: Gen3 TaskMgmt: 0x6827 fault when cleaning up port layer errors-(SCGCQ00147864 )
-Dev State table mem alloc size should be PLI_MEMORY_MULTIPLIER_NUM_DE(SCGCQ00148155)
 -ICES_PLUS(SCGCQ00148214)
 -Fault xD091 seen while running IO(SCGCQ00150094)
 -Device add/remove testing results in a fault 0x6202.(SCGCQ00151026)
 -When devices are removed / added the I/Os hang.(SCGCQ00151027)
 -SEP device incorrectly getting marked as Fast Path Capable by device manager(SCGCQ00151367)
 -Task Management Target Reset to a SAS target running Fast Path IOs choking the IO test(SCGCQ00151370)
 -A fast path INVALID_DESCRIPTOR exception would be passed to IOP with incorrect status(SCGCQ00152230 )
 -SATA: IO Stuck while running TM to sata drive.(SCGCQ00154686)
 -EDFB DMAGroup not set properly(SCGCQ00155513)
 -EDFB tracking of used DMA Groups not working(SCGCQ00155516)
 -FPGA: Fault 5890 after drive pull in Linux while running Medusa Stress(SCGCQ00155628)
 -0x6700 Fault(SCGCQ00156772)
 -64 bit driver does not detect hot(SCGCQ00158328)
 -SAS3FW: pliGetFpeMidInfo returns the FPE flags wrongly.(SCGCQ00158479)
 -FPE: Fault 0x5802 While running FPE IOs to mixed SAS/SATA topology.(SCGCQ00159515)
- MisMatch TxFM initialization code was not in FPGA build(SCGCQ00163393)
- Fast path I/Os keep running even when force pend bit is set(SCGCQ00163610)
 -FPGA: Dynamic Queue Depth variations for SAS Targets broken for powers of 2(SCGCQ00163962)
 -Fault 0xd012 while using Cuda timer when timeout is set to less than 3 seconds(SCGCQ00165753)
 -Task Management Requests never complete(SCGCQ00167193)
 -FPGA:Fault 4C30 seen with SCSI(SCGCQ00168724)
 -Fault 0xD093 during an MUR while running Fast Path Ios(SCGCQ00168911 )
 -0x5831 Fault while running heavy write ios and internal TMs(SCGCQ00169027)
 -Task Management may cause an infinite loop when cleaning fpe exception queue.(SCGCQ00170684)
 -PL faults with fault code 0xd040 when we try to enable CUDA timer through NVDATA-(SCGCQ00171456)
 -PL register dump stops on specific Detroit Core register(SCGCQ00172083 )
 -Format unit progress indication is not being updated correctly(SCGCQ00172663)
 -FPGA: 0x5111 fault during Target Mode testing(SCGCQ00172991)
 -Build fails because of Small Data Area overflow(SCGCQ00176456) 
 -6001 Fault During IR RAID0 Volume Creation Under Linux SLES11(SCGCQ00177106)
 -We were indexing outside the buffer range.(SCGCQ00179631)
 -Gen3 FPGA: 0x4101 fault while Target Mode testing with TM scripts(SCGCQ00181715)
 -Phy link rate does not follow MaxMinLinkRate in sas io unit page 1(SCGCQ00187614 )
 -MidUsed should be set for IOs if IoFlags indicates completion to colt even if Reply Dest is not set(SCGCQ00187766)
 -IOs stop to sata drives(SCGCQ00188083)
 -Fault 0x5896(SCGCQ00188925 )
 -SAS3 firmware faults when an FPE checkpoint is masked(SCGCQ00194554)
 -6101 Fault while running Task Management Stress test(SCGCQ00194569)
 -Invader A0: Spinup Delay ignored on port 0(SCGCQ00197619)
 -Invader A0: phys not coming up after being disabled and then re(SCGCQ00198822)
 -MR IOP did not get timeout notification for IO started by PL firmware when jammer was used to block response frames(SCGCQ00199049 )
 -Invader A0: Qdepth not decrementing on Task Set Full(SCGCQ00200268)
 -The "CurrentStatus" field in SAS IO Unit Page 6 is not getting updated properly when Port width modulation is disabled.(SCGCQ00201411)
- Invader A0: D100 fault while running stress using Write/Read (6) CDB size to a SATA NON(SCGCQ00202551)
- Drives do not link up reliably(SCGCQ00205778)
- Invader A0(SCGCQ00207040)
- Invader A0: When running 1MB I/Os to a Target Mode Invader a fault occurs.-(SCGCQ00207148)
 -Region lock release hangs due to AVL tree corruption(SCGCQ00208241)
 -Gen3: PM (SCGCQ00208458 )
 -Fault d012 due to FPE timer error while running stress loads(SCGCQ00209193) 
- Gen3: PwrMgmt - SATA Devices not showing up in Discovery(SCGCQ00209549 )
 -Invader A0: 5897 fault while glitching the whole port between the first 2 expanders(SCGCQ00210117)
 - Non-TARGET mode builds wouldn't compile(SCGCQ00210303 )
 -System DMA error not causing a firmware fault(SCGCQ00213368)
 -Invader A0: Fault 265D while running Block Move and Task Management Test(SCGCQ00217049)
 -Invader A0: 0xC009 fault on Target side of 12G setup(SCGCQ00217481)
 -Invader: Updated the FW work around tables for the B0 release.(SCGCQ00218436)
 -fault D025 while running IOs on a mix of SAS and SATA drives(SCGCQ00218687)
 -Invader A0: Program RxEEDP correctlyt for non good response handling(SCGCQ00218697)
 -Invalid 0x5897 and 0x6828 faults(SCGCQ00218792)
 -0x5841 while doing single Phy cable breaks for 1 second(SCGCQ00219298)
 -Invader A0 (SCGCQ00219408)
 -Fault 0xD07B seen during enclosure pull(SCGCQ00220676 )
 -TxFM cleanup does not clear all possible interrupts after cleanup.(SCGCQ00221800)
 -Workaround for LMIDs in exception queue having wrong VF_IDs(SCGCQ00222933)
 -PL hits TLB error while dumping SGLs(SCGCQ00223497 )
 -SMP command DISCOVER LIST fails with a timeout occasionaly. (SCGCQ00224795)
 -Fix fault when the trace buffer mode is changed.(SCGCQ00224807)
 -Invader A0: 0x583B fault during IO and Task Management in CM(SCGCQ00225189)
 -Invader A0 (init/targ): 0x7c54 fault during stress and cable breaks(SCGCQ00225813 )
 -Fault x6018(SCGCQ00225835)
 -Invader A0: Frame Length Mismatch during a read IO.-(SCGCQ00227400)
 -Fault 0x5302(SCGCQ00228348)
 -(SCGCQ00228765)
-Invader A0: CM looses devices during whole port glitches(SCGCQ00228959)
- Invader A0: 0x4A00 fault while running whole port cable glitches during stress(SCGCQ00229141)
- D072 Fault(SCGCQ00229676)
- Invader PL CLI show expander prints incomplete information(SCGCQ00235365)
- Gen3: PwrMgmt (SCGCQ00235403)
- After a device may send out an OAF with a rate value of 0x00(SCGCQ00239383)
 -Invader PL: 0x265D double fault when faulting before FPE register initialization(SCGCQ00241036)
 -Fault 0x2667 when trying to register a diag trace a second time (SCGCQ00242016)
 -0x510E fault while running CM BlockMove(SCGCQ00242069)
 -CLI command pl dbg or pl reg all causes 0x265D fault(SCGCQ00242162)
 -Fault x5814 while running Initiator and Target mode IO with another controller also doing Initiator and Target mode.(SCGCQ00244719)
 -Fault 0x583E seen running SATA IO with cable glitching(SCGCQ00246442)
 -WD SiliconEdge Blue SSD not discovered by adapter(SCGCQ00250990)
 -A region of greater than 3 can cause reading and writing to registers outside the snoop registers.( SCGCQ00253267)
 -Command Transmitting error fro OPEN FAILED cases doesn't work in out of resource cases.(SCGCQ00254943)
 -D024 or D025 fault seen when using FPE checkpoints to debug(SCGCQ00255192)
 -Fault 0x4A00 during cable breaking or drive pulls(SCGCQ00259575)
 -PL: Need to have unique fault codes(SCGCQ00263726)
 -Invader B0 was using high initial AWT values(SCGCQ00268857)
 -Invader A0 TxDMA cleanup code needed a change added back(SCGCQ00278781)
 -Invader B0: Adjust SAS Max Qdepth at init to account for Hw Limitations.(SCGCQ00282258)
 -TBM Extended Mode (PLI_TBM_BUFFER_ADDR_LOC_PLB not supported)(SCGCQ00282507)
 -Invader will reset ATAPI SEP Continuously while sending a command with inbound data(SCGCQ00289355)
 -ATAPI Request Sense Command failing(SCGCQ00290668)
 -Fault 6108 used in multiple places. (SCGCQ00291410)
 -WriteBuffer in 'Write Data' mode executes with good status when Bufferid=0 & Param List length != 512.(SCGCQ00297375 )
 -Fury B0: 0x4a00 Fault Running Cobra Expander Resets(SCGCQ00298630)
 -Invader B0: 0xD023 fault when BIOS searching for devices(SCGCQ00299563)
 -Invader B0: Controller links up at 3Gbps even when minimum link rate specified is set to 12Gbps(SCGCQ00314388)
 -PL Fault 0x6B0C when performing PHY power management(SCGCQ00318960)
 -Invader B0: (PL) Fault xD072 during I/T switching with IO and TM(SCGCQ00328713)
 -Fixed Problem in Target Mode Code Which Caused 0x26B5 fault(SCGCQ00336232)
 -Invader B0: Fixed Problem in DMA Queue via Hardware Workaround(SCGCQ00336429)
 -Invader: Fixed Debug Print in Port Layer(SCGCQ00336882)
 -PCIE lockup occurs when running EDFB IO with cable breaks and device removals(SCGCQ00337231)
 -Tape drive [3Gb/sec SAS] not detected with Invader controller(SCGCQ00338996)
 -Workaround to fix fault 0x4A00 failed to run in certain circumstances(SCGCQ00340547 )
 -Enable the new PCIe device translation block(SCGCQ00349889)
 -Combined error handling for PCIe devices(SCGCQ00360964)
 -Assertion while enabling MSIx interrupts(SCGCQ00362633)
 -Stang admin interrupt handler doesn't check IntStatus_IoComplete(SCGCQ00374668)
 -Backend PCI enumeration tweaks(SCGCQ00379303 )
 -(CUDA) Cuda writes zero to the reply descriptor post FIFO on completion(SCGCQ00386306)
 -Remove workaround for [Dauntless]264(SCGCQ00386627)
 -PCIE IO Unit 0/1 size in header is not correct(SCGCQ00394558)
 -No functional change(SCGCQ00395325)
 -Dauntless Firebird header file typos(SCGCQ00397598)
 -Several issues related to exception/error handling for NVMe devices(SCGCQ00397632)
 -Bad memory access when doing first AHCI IO(SCGCQ00400538)
 -PCIe discovery doesn't work for AHCI behind PCIe switch(SCGCQ00412140)
 -IO timeouts with AHCI devices(SCGCQ00412147)
 -NVMe: Nonzero SkipCount doesn't work very well(SCGCQ00412150)
 -AHCI: Write and verify 32(SCGCQ00414013)
 -CEC Interrupt Enable register has no interrupt bits enabled(SCGCQ00419454 )
 -AHCI: TLB error/265D fault on write and verify command with complex SGL(SCGCQ00420902 )
 -Dauntless FPGA: Data Corruption reported when running 1M IO to AHCI device(SCGCQ00424263)
 -No access to DDR for backend PCIe devices(SCGCQ00426529)
 -SATA IOs larger than 255 sectors fail(SCGCQ00426959)
 -FW might fault with D004 running IO with Abort Task TM to AHCI device(SCGCQ00435380)
 -NVMe: Admin queue doorbell writes should be 32 bits(SCGCQ00438982 )
 -AHCI: MODE SENSE command fails with protocol error for some AHCI endpoints (SCGCQ00439935)
 -Debug only: SGL print aborts early(SCGCQ00441271)
 -Assertion failed: ..\..\pl\PciDevice/plPciSglTranslate.c, line 1941 for chained SGL(SCGCQ00443783)
 -PL Init Unnecessarily Zeros Memory(SCGCQ00447799)
 -AHCI: Command timeout with mixed auto and nonauto IOs(SCGCQ00448191)
 -PL translated read or write IO to a backend PCIe device times out(SCGCQ00448640)
 -FW might fault D065 fault when running IOs + Query task to AHCI device(SCGCQ00449578 )
 -Dauntless FPGA PDB PIM alignment issue(SCGCQ00449934)
 -PLB PIM3 internal address and PCI address mapping not maintained properly in firmware(SCGCQ00450497 )
 -Fault 0xd10f is seen as timer is not cleared for read/write PCIe IO(SCGCQ00454161)
 -AHCI Debug: changed how CCS value is read(SCGCQ00455697 )
 -AHCI: 60D fault on completion of a Write Verify command(SCGCQ00456311)
 -AHCI: Non-read/write IO is timed out(SCGCQ00457590 )
 -Dauntless FPGA: Fault 26B5 when running pl reg rxdpbuf from uart(SCGCQ00460919)
 -PL Hangs in Spinup Retry Request Entry function if 2 AHCI and a SAS devices are connected(SCGCQ00464397 )
 -D20C fault when starting CM Block Move with Diagnostic Buffer Posted(SCGCQ00465468)
 -SATA passthrough issued during FW translated AHCI IO results in 265D fault(SCGCQ00468027)
 -PCIe Device Page 2 header read always fails(SCGCQ00470746)
 -CM fails to detect a switch attached NVMe device(SCGCQ00479121)
 -Build fails when PL_FEATURE_PCI_DEVICE_SUPPORT macro disabled(SCGCQ00481604 )
 -PL did not clean up resources for internal AHCI encapsulated frame if associated SATA passthrough command failed.(SCGCQ00481908)
 -IO timeouts or D071 fault during task management with backend AHCI device(SCGCQ00484044)
 -Dauntless FPGA: D300 fault running IO and TM(SCGCQ00490962 )
 -NVMe: D300 fault with high queue depth PL translated read/write IOs(SCGCQ00498178 )
 -E002 fault occurs during AHCI task management(SCGCQ00505719)
 -Intermittent 265D fault on read of PCIe Device Page 0 associated with a phy(SCGCQ00518205)
 -IO timeouts occur after task management(SCGCQ00524964)
 -NVMe: fix a couple of async event handling issues(SCGCQ00556769)
 -NVMe: Write Buffer (mode 0x5) translation fails to complete(SCGCQ00557073)
 -Dauntless: Backend POM Window size should be aligned to number of PCIe devices supported(SCGCQ00558089)
 -(SCGCQ00590504)
 -NVMe: no call from TM during init idle wait (SCGCQ00595468)
 -(Sata Only) Sending 'Ata Passthrough' SCSI command with ATA Command as 'Read Verify Sectors' sometimes results in check condition response.(SCGCQ00597647)
 -NVMe: handling of admin queue full condition during NVMe async event handling(SCGCQ00600515)
 -With PL_FEATURE_PCI_DEVICE_SUPPORT disabled, improper MPI status sent back to config Requests(SCGCQ00613854)
 -NVMe: 6001 fault with NVMe init ready wait plus TM(SCGCQ00630682)
 -26B5 fault on backend PCIe link down(SCGCQ00640436)
 -DCR Read/Write functions in PL had an extra layer define being used to access that was not needed.(SCGCQ00660424)
 -NVMe: remove READ BUFFER translation(SCGCQ00663643)
 -NVMe: no retry if initial NVMe init fails(SCGCQ00664181)
 -iop show diag fails to clear ring buffer(SCGCQ00669672)
 -Fault 0x6230 seen when sending Port Enable(SCGCQ00670926)
 -4308 fault when using SAS IO Unit Control message with SEND PRIMITIVE operation(SCGCQ00673188)
 -Intruder: Fault 0x4308 during SMP time out(SCGCQ00677699)
 -(All SAS/SATA products) Fault 0x670A seen on TM testing(SCGCQ00682695)
 -PL: Fault 0x6004(SCGCQ00682898 )
 -NVMe: incorrect buffer offset used in Write Buffer translation(SCGCQ00683319)
 -PL: Fault 0x6001(SCGCQ00685967)
 -Dauntless FPGA: IOs timeout when running Medusa IO with abort task/abort task set TM(SCGCQ00689862)
 -IO UNIT control message replies with 'devhandle 0'(SCGCQ00692114)
 -Fault 0x670A running IO and Task Management (SCGCQ00693854 )
 -Fault x6001 running IO with Task Management(SCGCQ00693865)
 -PL: 0x6003 fault(SCGCQ00694271 )
 -Firmware Fault 0xEF00 seen while running Task Management and IOs to AHCI drives.(SCGCQ00695559)
 -EF04 fault running Random TM with Mixed IO sizes(SCGCQ00696962 )
 -Intruder FPGA: Destructive Domain (Bobcat's) hit fault 0xD0E0(SCGCQ00696975)
 -Ventura: Need required external defines and header file ordering to include SCS FW libs in IOP(SCGCQ00697063)
 -Intruder: Fault 0x265d while doing Port Enable(SCGCQ00702696)
 -PL NVMe (Ventura) IOCStatus SCSI Task Management Failed when running Abort Task to NVMe(SCGCQ00710213)
 -Dauntless FPGA: E5A1 fault running Medusa IO and abort task set TM to NVMe drive(SCGCQ00710238)
 -Intruder: Fix issues in FW controlled spinup(SCGCQ00710609 )
 -Intruder FPGA: Drives attached to expanders gradually get dropped during Task Management test(SCGCQ00715652)
 -Removal of unnecessary debug prints incase of spinup interrupt(SCGCQ00716758)
 -Ventura: PL memory allocation does not allocate DevHandles for PCIe devices(SCGCQ00716790)
 -Ventura: IOA Local RAM requires an offset(SCGCQ00717129)
-Fault 0x265D(SCGCQ00719768))
- Fault 0x6003 while running stress to 7 cascaded expander topology on Core 0(SCGCQ00723375)
 --Target Mode (SCGCQ00724470)
 -Ventura: Drives on link 1 always respond with sense data 020411(SCGCQ00725112)
 -Fixed Known Issues with FIS Port SCSI Unmap Translation(SCGCQ00728088)
 -Ventura: Small Data Area overflow in compile/link operation(SCGCQ00735463)
 -Fault 0xE00B while running mixed IO sizes with random task managements.(SCGCQ00736592)
 -Intruder FPGA: Fault 0x584F while initializing PL(SCGCQ00738149)
 -Intruder FPGA: Fault 0x584F while running Initiator Mode SMP Protocol Error HandlingSCGCQ00754410)
 -Intruder FPGA: Drive loss due to stuck TxDMA. (SCGCQ00754417)
 -(AHCI Only) Inquiry command to AHCI Sata drives fails(SCGCQ00758599)
 -Intruder FPGA: 0x6001 Fault while cleaning up an unconfirmed response frame during Task Management(SCGCQ00759399)
 -Backend PCIe: periodic dev init state check shouldn't run if init isn't running(SCGCQ00760618 )
 -Dauntless FPGA: IOs stop in while running task managements to AHCI device(SCGCQ00764902)
 -Intruder FPGA: Repeated SMP timeouts while running Io Stress to a mixed SAS/SATA topology behind cascaded expanders(SCGCQ00767624)
 -Dauntless: 265D fault on port enable(SCGCQ00768567)
 -AHCI: init breaks on device register access failure(SCGCQ00773059)
 -Intruder FPGA: Fault 0x670A on Target Controller during Block Move and Task Management Test(SCGCQ00776306)
 -Fault 61A5 during system initialization(SCGCQ00783705)
 -Incorrect use of variables in clear(SCGCQ00791142 )
 -Intruder: Implement Hardware Workaround for Minor Link Layer Issue(SCGCQ00795985 )
 -Intruder FPGA: Fault 0x4307 while running Block Move to drives and resetting random expander(SCGCQ00800919)
 -Backend PCIe: EC0F or D065 faults during PCIe task management(SCGCQ00804044)
 -Intruder FPGA: Add code to validate SASCore Number from chip phy number back in(SCGCQ00804129)
 -Ventura (SCGCQ00805411)
 -Fault 0x4330 when running non automated IO to SATA/AHCI/NVME devices(SCGCQ00818397)
 -Ventura: PCIe Device Manager DMD expiration handling(SCGCQ00824724)
 -Ventura: Only 1 drive is discovered when 2 sas or 2 sata drives are directly attached(SCGCQ00828878)
 -Dauntless FPGA: Misc AHCI tag allocation/count fixes for non(SCGCQ00836056)
 -PL: D304 fault while running Task Management test(SCGCQ00839498 )
 -PL: Assert was using compiled out code causing bad ring buffer(SCGCQ00839583)
 -Ventura: backend PCIe: some bringup changes(SCGCQ00841065)
 -Intruder A0: Fault 0x5854 during I/T Switching(SCGCQ00843939)
 -Intruder A0: Fault 670A while running target mode Jammer exception Test(SCGCQ00845803)
 -Intruder A0: 0x6C02 fault while running IO's and power glitching on every core(SCGCQ00846661 )
 -Ventura: backend PCIe: command issued prior to first AHCI init success may fail to unpend(SCGCQ00848265)
 -Ventura FPGA: Fault 6001 soon after initializationSCGCQ00851724)
 -Ventura FPGA: backend PCIe: data corruption seen during write/read/compare test(SCGCQ00851725 )
 -SAS3.5FW has tabs in source code(SCGCQ00852767)
 -Ventura: IFAULT_PL_LOW_INT_SPURIOUS (0x6C03) Observed(SCGCQ00854241)
 -SPL(SCGCQ00854245)
 -PL: Incorrect SGPIO Index calculated for more than 2 SGPIOs(SCGCQ00855007 )
 -Ventura: IFAULT_PL_HIGH_INT_SPURIOUS fault (0x6C02) asserted(SCGCQ00855711)
 -Ventura: modify some debug info(SCGCQ00856678)
 -Ventura: PCIe device handle allocation starts at min handle plus one. (SCGCQ00856701)
 -PL (SCGCQ00859820)
 -Ventura: backend PCIe: modify IOP resource alignment code so that size is aligned also(SCGCQ00859837)
 -Fault 0xEC60 starting IO(SCGCQ00860763)
 -Rearrange PDB RCC interrupt handlers to avoid spurious interrupts(SCGCQ00862058)
 -Ventura: backend PCIe: PL translated PCIe read/write IOs may time out (SCGCQ00869263)
 -Two constants identified as containing old values.(SCGCQ00870618 )
 -PL: Enclosure Management bounds checking(SCGCQ00870903)
 -PL: Fix Out of Bound Array Access in Diagnostic Command code(SCGCQ00871318)
 -PL: Resize PL_TRANSNUM_UNUSED Define to 8 bits(SCGCQ00871678)
 -PL: Remove unused variable in a firmware function(SCGCQ00871686)
 -PL: Remove unused variable from the TRIM command handler(SCGCQ00871688)
 -SATL: Get Rid of Unnecessary/Duplicate Assignment Statements in SATL Function(SCGCQ00872849)
 -Ventura FPGA: 0xEC9D during PCIe task management(SCGCQ00872879)
 --Ventura: Fault 0xd024 is seen sometimes during link glitch testing(SCGCQ00874912
 -Ventura: backend PCIe: IOs to an AHCI device may halt after TM(SCGCQ00876257)
 -PL initializes IOA Local RAM with 0s without IOP FW knowing(SCGCQ00877473)
 -Timer Overflow errors for IOs sent using pliLightStartScsiIo(SCGCQ00880811)
 -Ventura FPGA: Fault EC30 fault followed by fault EC70 on full port cable break against an NVMe drive(SCGCQ00882972 )
 -Ventura: unexpected behavior may occur during PL init with non (SCGCQ00887074)
 -Ventura FPGA: TM to devices behind switch failing(SCGCQ00895687)
 -(AHCI ONLY) 0xE015 fault when bringing AHCI drive online in Windows OS(SCGCQ00896563)
 -Ventura: backend PCIe: various issues involving NVMe task management(SCGCQ00897148)
 -pl: IT: some debug prints go missing when a trace buffer is posted(SCGCQ00901424)
 -Remove Random number generator feature.(SCGCQ00904420 )
 -BL: Tiger bootloader is locking up and causing aborts(SCGCQ00910746)
 -Ventura: Dauntless min build fails with GPIO wide port group mapping changes(SCGCQ00923022)
 -Ventura: Sas phys are not linking up(SCGCQ00927730 )
 -PL: Optimize Start pending I/O function to gain a few % of IOPS increase(SCGCQ00929765)
 -PL: Fix arm compiler error.(SCGCQ00931355)
 -Tiger: PSB PEX registers mapped to incorrect AXI addresses.(SCGCQ00937890)
 -Tiger: CE and FxCore init issues(SCGCQ00943870)
 -Ventura: backend PCIe: 6001 fault on target reset with encapsulated requests outstanding(SCGCQ00952596)
 -Ventura: Fault 4308 when firmware cycle mode enabled(SCGCQ00953736)
 -Ventura: backend PCIe: fix some config page related bugs (SCGCQ00954691)
 -Ventura: backend PCIe: NVMe devices or PCIe switches intermittently fail to link up(SCGCQ00987792 )
 -Ventura: Second Sas and CSW cores are powered up when they don't exist(SCGCQ00987847)
 -Ventura: backend PCIe: need to reject an NVMe device with PI or metadata enabled(SCGCQ00991188)
 -Ventura: SAS devices are not discovered when hot plugged.(SCGCQ00991441 )
 -Fault 0x5841 due to Check Condition on Atapi Device(SCGCQ00994935)
 -Ventura: backend PCIe: SAS IO Unit Page 1 write causes NVMe devices to go away(SCGCQ00998568)
 -Ventura A0: 265D fault when running Destructive Domain test(SCGCQ01000117)
 -Ventura: Fix typo in register definition name(SCGCQ01002334 )
 -IOP submitted IOs to PL might inadvertently comlete to Host(SCGCQ01002364)
 -Tiger PL: Host port config space automatically sets BusMaster and MemSpaceEn(SCGCQ01002370)
 -Tiger: MPT Endpoint needs to be enabled before any register of the MPT endpoint is written(SCGCQ01004271)
 -PL: Devices removed if PCIe Extended Capabilities are not implemented(SCGCQ01005270)
 -PL: Tiger: Memory corruption when PL calls function to retrieve PCIe link speed and width (SCGCQ01007019 )
 -Fault 0xD102 is observed when incorrectly composed SCSI Write Buffer command is issued to a SATA drive(SCGCQ01008776)
 -PL: Link Reset prints are not disabled when Link Reset mask is cleared(SCGCQ01013716)
 -Tiger: TLPs from NVMe drives have incorrect requester ID on egress at host port(SCGCQ01015401)
 -(Sata Only) WRITE AND VERIFY SCSI Command Not Failed With CC for LOGICAL BLOCK ADDRESS OUT OF RANGE Condition(SCGCQ01015401)
 -Tiger Ventura: hardcoded devhandle translation needed removed(SCGCQ01018537)
 -Fault 0xEC69 observed while running mix of IO and task management tests on NVMe devices. (SCGCQ01018961)
 -Tiger FPGA: Fault 0xEE18 while initializing Ventura Tiger attached to a Tiger FPGA with a DA SAS drive (SCGCQ01019218 )
 -Tiger FPGA: Fault 0xED07 with tip while running PCIe link configuration at Start of Day(SCGCQ01021849)
 -Tiger PL: Fault 265D when configuring the backend PCIe(SCGCQ01024192 )
 -Ventura PL: Device handle pre(SCGCQ01024765)
 -Ventura A0: IOs stop while randomly sending a reset to single SATA device every 10 sec(SCGCQ01028113 )
 -PL: Fault code 0xD091 is in multiple locations(SCGCQ01029667 )
 -Fault 0xD025 is seen while running PCIe cable break test with IO test(SCGCQ01033270)
 -Ventura: backend PCIe: fix a few issues encountered upon surprise removal of a PCIe switch(SCGCQ01034082)
 -Ventura A0: EC60 Fault when Cables Moved on Ventura(SCGCQ01034096)
 -Ventura: Total pendcount incorrect for NVMe(SCGCQ01035858)
 -PL: FORMAT UNIT command sent to NVMe drive fails when FMTDATA bit is set to 1(SCGCQ01036201)
 -Ventura: backend PCIe: 265D fault on 'pl dbg' in some NVMe device rejection cases(SCGCQ01038453 )
 -Ventura: NVMe and non(SCGCQ01039059)
 -Tiger FPGA: Fault 265D is seen during IO and TM on SAS/SATA behind expander and IO on direct attached NVMe(SCGCQ01040974 )
 -PL: Some unhandled IOA interrupts were falsely generating spurious interrupt fault code(SCGCQ01043930)
 -Cannot read data from switch attached NVMe disk in legacy BIOS.(SCGCQ01044039 )
 -Tiger: Implement workaround for PSB failure to transmit message TLPs(SCGCQ01044060)
 -(SCGCQ01044463)
 -Ventura Tiger: Set default TM timeout to 6 sec for SED attached end devices( SCGCQ01045628)
 -Ventura: backend PCIe: miscompare may occur after link glitch between HBA and PCIe switch(SCGCQ01046343 )
 -Tiger: IO timeout seen when running IO with Query Task TMs(SCGCQ01047487)
 -PL: Mid reuse may cause data miscompare(SCGCQ01047691)
 -Ventura: backend PCIe: issues related to backend PCIe link handling and NVMe TM(SCGCQ01052703)
 -Persistent Connection Timeouts Occur With Some Drives(SCGCQ01057572)
 -Fault 0x1D02 while running port break between HBA and PCIe Switch(SCGCQ01058662)
 -Ventura A0: NVMe device isn’t getting reconfigured even though discovery runs and appears to find it(SCGCQ01058974)
 -FW entered PL Fault 0000d0d1 while I/Oing across LDs(SCGCQ01059682)
 -Tiger FPGA: Task Management to an NVMe drive causes the drive to drop off(SCGCQ01065218)
 -Ventura A0: NVMe init cmd timeout insufficient (SCGCQ01066004)
 -Ventura: NVMe: ARRE Bit Not Set to 1b in Read(SCGCQ01069374)
 -Ventura IOP: Fault 0x430B when removing a SED attached drive(SCGCQ01079206)
 -ARM abort due to stack corruption(SCGCQ01084201 )
 -Tiger: Periodic DPC check renders ringbuffer useless(SCGCQ01088685)
 -Coverity defect : Dead code due to repeated comparison(SCGCQ01089362)
 -PL: Some configuration pages return non(SCGCQ01092041)
 -Fault 0x430B observed while running IO and port glitch test between Marlin A0 and attached expander.(SCGCQ01093757 )
 -Tiger FPGA: Fix PCIe Io Unit Page 0 Read handler(SCGCQ01095060)
 -Marlin A0: Port glitch or lane break between HBA and PCIe Switch causes NVMe drive to go missing(SCGCQ01109425)
 -PL Light IO completes on Core 0 after getting FPE DISABLED Exception(SCGCQ01118902)
 -Fault 0x1900 hit when IOs and Task Abort Task management requests are run on the NVMe device(SCGCQ01122538)
 -Ventura: backend PCIe: IO timeouts may occur with NVMe devices under Linux(SCGCQ01134727)
 -Ventura B0: Misc active cable management fixes(SCGCQ01137484)
 -Ventura A0: Not all slots are enumerated with SIO group ID for odd/even PHY connector lane routing(SCGCQ01138057)
 -Ventura/Marlin: backend PCIe: reliability of link bandwidth change notification(SCGCQ01138343)
 -PL: Data abort exception while pulling JBOD(SCGCQ01138634)
 -pl: 265D fault if PDBs are unmapped with backend PCIe support disabled(SCGCQ01147668 )
 -PL: Incorrect LogInfo may be returned during handling FPE Exception IO(SCGCQ01165427 )
 -Virtual SES support can cause Fault 0x7200(SCGCQ01171097)
 -Enclosure Management: SES Staus Element Fails to Match a Valid ManPage14 Entry(SCGCQ01181308)
 -pl: delay loop may have twice the expected duration(SCGCQ011925710
 -Ventura PL: (NVMe) Fault 0x6004 while completing a Task Management due to unaccounted for Diverted IOs.(SCGCQ01196103)
 -Ventura: backend PCIe: various faults may occur after a link disturbance(SCGCQ01206536)
 -Ventura (Sata Only ) : Internal Device Resets observed on SATA Drives during I/O.(SCGCQ01207972)
 -Ventura B0: BTL is not assigned to expander(SCGCQ01211588)
 -Fix issues wit ttyLogToFlash=1 setting during task mgmt(SCGCQ01213091)
 -modified behavior of DCMD to return negotiated link speed for intel only.(SCGCQ01213413 )
 -Validate mid in Tx openfail cleanup(SCGCQ01215592 )
 -0xEC84 Fault observed when PCIe switch is Powered OFF and Powered ON(SCGCQ01216678)
 -PL Fault 0xEC07 found while Push/Pull of JBOD with IO's(SCGCQ01217170)
 -Intruder compile error in plVirtualSes.c(SCGCQ01219448 )
 -Ventura: NVMe devices not discovered with auto backplane detect RefClk enabled on VPP PCIe x4 backplane(SCGCQ01219537)
 -PL Fault 0xD368 seen due to POM windows not properly aligned(SCGCQ01222147)
 -GPIO HD Cable management function does not support active high level.SCGCQ01231609 )
 -FPGA Compile Error (SCGCQ01233994 )
 -Ventura/Marlin: backend PCIe: switch resources may remain allocated after it is removed(SCGCQ01235267)
 -pl: NVMe: Abort Task may abort an IO when it is still outstanding at the device(SCGCQ01235948)
 -NVMe drive doesn't come up with new firmware after SCSI Write Buffer is issued with mode Download Microcode, save and activate (mode 5)(SCGCQ01237245)
 -PL PCIe Discovery events are broadcasted with an invalid data((SCGCQ01241985)
 -pl: NVMe: fix a couple of issues exposed by a malfunctioning device(SCGCQ01243546)
 -Fault 0xD073 with IOs to NVME drives with media errors.(SCGCQ01249813)
 -Fault 0x265D while powering on/off the attached PCIe switch devices.(SCGCQ01251456)
 -Marlin: Add additional support for cold boot fix (SCGCQ01251641)
 -IO Timeout while sending Task Managements to PCIe devices(SCGCQ01256214)
 -pl: task management may not complete with heavy IO load(SCGCQ01258861) 
 -VSES diag page 0A mapping not enabled for NVMe devices(SCGCQ01261033)
 -Ventura: Slot status LED updates fails with mixed backplane types (VPP and SGPIO) in the same server config-(SCGCQ01266429)
 -Ventura B0: vSES Target: INQUIRY SCSI Command in Not Failed With Expected Sense Data for Non(SCGCQ01269854)
 -Fault 0xD372 is seen during NVMe IO run and drive push pull test(SCGCQ01271759)
 -Ventura/Marlin: backend PCIe: NVMe devices aren't discovered with VSES disabled(SCGCQ01274107)
 -Data loss during cache offload power cycle test(SCGCQ01286491)
 -pl: excessive exception generation during SATA IOs with Task Set Full handling disabled(SCGCQ01291127)
 -73: FW hit pl6101 when single glitch COL(SCGCQ01295065 )
 -Enclosure ID changes when a cable pull and insert occurs.(SCGCQ01295290)
 -Ventura controller fail with diagnostic(SCGCQ01300633)
 -pl: NVMe: EC0F fault occurs during task management(SCGCQ01303943)
 -MR7.1: Unexpected event for lun not ready Sense: 2/04/02(SCGCQ01304550)
 -Modify CSW initialization(SCGCQ01306944)
 -Disable SATA FIS poritng on a SATA drive connected to a Broadcom expander with EDFB enabled.(SCGCQ01307008 )
 -Added Profile 0xD (SCGCQ01307054)
 -Handle 240 PD & VD Code Review AIs in 7.3 firmware(SCGCQ01308532)
 -Remove HDD from backplane always remain green light with internal adapter(SCGCQ01309087)
 -B-ST 7.3 (4 GB Profile 12)==>SCGCQ01082693 Verify support Raid level firmware hit Montask ..arm/exceptions.c(SCGCQ01310247)
 -Incorrect DmDevSMPReady array size(SCGCQ01310496)
 -Due to a timing issue a hang condition may occur on cold power up(SCGCQ01311156)
 -Update PL version check for PL version assert for OEM(SCGCQ01313019)
 -Backplane Expander firmware fails with Windows DUP via IDRAC GUI and LCC(SCGCQ01313047)
 -Marlin B0: 0x4310 fault on fwHostBoot post clean flash on FW: 03.250.01.00(SCGCQ01318643 )
 -MR7.1: PD missing after system reboot during COL test . PD missing reported at POST(SCGCQ01318859 )
 -Reject profile change during Background Op in progress or cancel pending profile change to start Background Op (SCGCQ01320854)
  -(SCGCQ01324136)
 - JBOD drop during cable pull test.(SCGCQ01326924)
 -MR_7.3_FW : MonTask: line 332 in file ../../raid/taskman.c rst=0 while trying to delete 128 R0 DGs(SCGCQ01334150)
 -Check in files needed for CQ NVDATA Migration into FW source tree(SCGCQ01335640)
 -FW returning MFI_STAT_OK_REBOOT_REQUIRED for profile revert back(SCGCQ01337346)
 -MR7.3 (SCGCQ01337564)
 -Set gActiveFeatureSet.maxVds to correct value for any Profile(SCGCQ01337674 )
 -Controller hits montask and hangs on next boot when an Insight blade is inserted in the chassis.-(SCGCQ01337676)
 -(SCGCQ01341838)
 -MR 7.3 PA4: Controller restart command hung during IO on VD's and Jbod's (SCGCQ01343745)
- Static code analysis defect fixes in MR_FW_SAS3.5_7.3_FC(SCGCQ01345683)
-- Drives reported as missing after pinned cache flush is interrupted at SOD(SCGCQ01345827)
- Clean up DRAID Code (SCGCQ01348405)
 -Montask seen on line 151 in file ../../raid/span.c rst=0 , foreign import and cable push/pull .((SCGCQ01351581)
 -Montask : line 166 in file ../../raid/taskman.c rst=0 , while performing IOs on 240 R1 VDs with rebuild((SCGCQ01353560)
 -For single image COL, in least latency mode, FW offloads data without erasing flash.((SCGCQ01356545)
 -Join Mirror functionality not workingSCGCQ01368560)
 -dereferencing uninitialized pointer(SCGCQ01373232)
 -MR 7.3 :Fatal firmware error: Line 939 in ../../cpu/arm/exceptions.c when mprint passes incorrect parameters.(SCGCQ01374742 )
 -FW breaks into megamon for monSes.c while running IO on VD(SCGCQ01385184)
 -Kill adapter during single path cable removal/insertion.(SCGCQ01385424)
 -Issue (SCGCQ01388733)
 -[PL]Ventura MR 7.3 ((SCGCQ01389530)
 -In NVMe only profile not able to see the profile in profile get list.(SCGCQ01393547)
 -MR7.3: 4k PD Configuration can't be imported from iMR to MR Controller. However, it can be imported from MR to iMR(SCGCQ01395842)
 -Offload descriptors are 64 bit in size, resulting in offload errors.(SCGCQ01397850)
 -Virtual Address overlap results in skipping DDR ECC error checks when cache is dirty(SCGCQ01400126)
 -Storelib is not getting any data for NVMe encap command from the firmware(SCGCQ01402872)
 -Raid Map and Pd sync are updated for every OCR(SCGCQ01415120)
 -FW is continuously printing DmDevRecValidateRetry during Discovery with bad (0 MB) PD.(SCGCQ01418720)
 -Revert SCGCQ01418180 for 3616 and 3508 XSD, 3408 and 3416 remains the same.(SCGCQ01424266)
 -MR7.3.1 : user can set unsupported controller profile (ID: 12) on a OEM 16i controller(SCGCQ01509952)
 - Open Timeout Error Handling is too drastic(SCGCQ00089824)
 -SPV: Virtual Expander does not reply to SMP Report Zone Manager Password Request.(SCGCQ00135037 )
 -Fault x265D running random expander reset test in emulated external storage configuration(SCGCQ00135537)
 -Receipt of HARD_RESET data pattern causes firmware to perform error recovery in Target mode only(SCGCQ00135796 )
 -SPV: Add check to verify if a Virtual Function is allowed to access a Virtual Port.(SCGCQ00136685)
 -SASWideMaxQueueDepth not being set for direct attached wide port SSP target devices(SCGCQ00136975 )
 -Thunderbolt: PhySlowInit workaround should not be turned on(SCGCQ00138029)
 -Underlength Read on Falcon(SCGCQ00138247 )
 -Read Long command to SATA device does not complete(SCGCQ00143655)
 -FPGA : FPE FW (SCGCQ00143659 )
 -FPGA: Bugs in TBM code(SCGCQ00143878)
 -Fix Sata Init(SCGCQ00144557)
 -Obtaining proper value of Standby condition timer from Power condition mode page (page 0x1a) for a mode select command.(SCGCQ00144748)
 -0x6009 Fault During TARGET RESET TM Completion(SCGCQ00145193)
 -Gen3 TaskMgmt: TMs that send an SSP TASK IU always timeout and complete unsuccessfully(SCGCQ00145553)
 -Typo in SATA init code could result in wrong block size reported for non(SCGCQ00146128)
 -Fault 5804 on Firmware startup(SCGCQ00146974
 -Postponing and Disabled IO Path Bits Not Being Updated Through CudaMgr(SCGCQ00147136 )
 -Invalid Count Mismatch Error Handling for Fast Path IOs(SCGCQ00149150)
 -Fw hang (and fault) during IO increment with FPE disabled.(SCGCQ00149621)
 -(SATA Only): fault 0x7C33 while running fast path IOs to expander attached SATA drive(SCGCQ00151194)
 -SATA: infinite loop on sending IO while format is running(SCGCQ00151613 )
 -F/W hangs when sending IO while requester is disbaled(SCGCQ00155750)
 -0x6001 Fault while running TM Target resets durin Fast Path IO testing(SCGCQ00156005)
 -FPGA: Clearing Sata DMA Passthru Interrupt not occurring.(SCGCQ00157384)
 -Internal Task Management requests may be improperly constructed(SCGCQ00159014)
 -FPE: FP_DISABLED exception handling needs to check for a valid devhandle using the same checks as pliStartScsIO(SCGCQ00160011)
 -FPGA: SAS device page 0 fast path bit(s) not properly set(SCGCQ00160469)
 -Fast Path will be enabled for ATAPI tape device after a reset and init in CM (SCGCQ00165930 )
 -FPGA: Target Mode error injection testing results in a 0x265D fault.(SCGCQ00166409)
 -Fault 0xD071 seen when sending down Abort Task Task Management(s)(SCGCQ00169004)
 -Fault 0x4A00(SCGCQ00175661)
 -Fault 0x4d05 seen to ATAPI SEP device when internal request sense is issued.(SCGCQ00177620 )
 -TxCtxMgr interrupt handling uses incorrect register to determine which context is in error(SCGCQ00179621)
 -TM: Fault 0xD0ED while running task management(SCGCQ00179989 )
 -TM: 670A Fault in task management(SCGCQ00180216)
 -invalid parameter checks in TBM interface(SCGCQ00181781)
 -Fault 0x5826 when running Task Management tests(SCGCQ00183297 )
 -Fix 2 unguarded loops in Control Queue Cleanup(SCGCQ00183881)
 -Controller faults with code 6004(SCGCQ00187146)
 -Ensure that PL stops FPE on any PL sourced fault(SCGCQ00187765 )
 -Linking error with PL library(SCGCQ00192806 )
 -When an extra Data frame, or data is sent by SAS device for a READ, the device isn't sent a Task Management.(SCGCQ00192944)
 -FPE: Sata Init code causes recursive call to FPE Exception queue handling(SCGCQ00198255 )
 -Timeout of an Inquiry command to SATA drive which was already completed as failure(SCGCQ00199797)
 -Gen3: PM (SCGCQ00203543 )
 -Large Block IOs to SATA drives timeout (SCGCQ00206603)
 -Gen3: PwrMgmt (SCGCQ00207737)
 -PL layer notifies IOP layer for 0 timed out IO on receiving timeout interrupt.(SCGCQ00208538)
 -DMA Engine debug timers initial values cause immediate interrupt and fault(SCGCQ00208650)
 -Discovery does not complete with Bobcat expander.(SCGCQ00209645)
 -Fault 0x4852 while running target Modes IOs and disabling phys.(SCGCQ00210183)
 -Gen3 PwrMgmt: PwrMgmt memory request accesses IOP function (SCGCQ00210496)
 -Invader A0: Fault 0xD140 while doing random TMs to FAst Enabled SAS drives running IOs(SCGCQ00215178 )
 -Gen3: Power Management change request fails when direct(SCGCQ00216828)
 -Invader A0: Fault 0x6003 while power glitching random enclosures during Block Move Test(SCGCQ00219144)
 -fault D024 with timeouts while running straight IOs(SCGCQ00220650)
 -Fault 0x5833(SCGCQ00225772
 -SMP function failed during enclosure pull/push tests.(SCGCQ00227580)
 -Fault 0x7C20 occurs with cable glitches on a large topology(SCGCQ00230957)
 -Debug dump via "pl reg all" UART only dumped 1/2 of the DMA Transmission Q(SCGCQ00233599)
 -Invader A0: 0x5861 fault during stress and whole port cable glitches(SCGCQ00233716)
 -The BT999 Detection Algorithm was removed when WA for fault 4A00 was checked in(SCGCQ00242147)
 -Invader A0: 0xD071 fault during stress and whole port cable glitches(SCGCQ00250013)
 -Add DCR reg info on SASConfig Reg Fault 7C54(SCGCQ002510480)
 -Ensure parity correctly disabled if BT999 seen(SCGCQ00259200)
 -Invader B0: Zero IoCount event in active state should only be turned on for SATA(SCGCQ00283220)
 -PL: Firmware may not send Notify(Power Loss Expected) in accordance with the SAS Spec (SCGCQ00290667 )
 -IO hang while running IOs and enclosure cable pull push(SCGCQ00293701)
 -WriteBuffer in 'Write Data' mode executes with good status when Bufferid=0 and Buffer Offset=non(SCGCQ00297369)
 -Invader B0: Fault 0x61A0 while running Block Move Test to Direct Attached Drives(SCGCQ00319503)
 -Some IO accelerator registers are not yet available on FPGA(SCGCQ00349862)
 -Fixed pl_src build(SCGCQ00355601)
 -Back end PCI interrupts are not enabled(SCGCQ00357192)
 -NVMe: FW SGL translation doesn't work properly with buffers larger than 1 host memory page(SCGCQ00377286)
 -IOA hardware generates an incorrect AHCI command header(SCGCQ00383642)
 -AHCI Asynchronous Notification was not working (SCGCQ00393902)
 -[Dauntless] SkipCount and Host Chain Support not present for IEEE64 to NVME PRP translation(SCGCQ00395615)
 -Need Proper Routine for Initializing Cuda Timer Wheel RAM (Reset Sequence)(SCGCQ00403591)
 -7C32 fault(SCGCQ00404224
 -Need to handle DATALEN_GT_SGLLEN exception differently(SCGCQ00415490)
 -Unexpected D033 fault(SCGCQ00418247)
 -NVMe: Fix a few bugs from the SGL breakup code review(SCGCQ00418946)
 -Added support for non(SCGCQ00420921)
 -D115 fault after dumping 'pl pci regs all'(SCGCQ00424915)
 -AHCI: an address error will be reported with the wrong error status(SCGCQ00436941)
 -Max payload size of virtual bridges not configured during enumeration(SCGCQ00442730)
 -DDR not mapped for MegaRAID builds(SCGCQ00445331)
 -Incorrect Mid value used looking for unconfirmed response during HW cleanup(SCGCQ00449087)
 -Fault 0xd102 hit when IOP issued task management request(SCGCQ00456250)
 -Fault 0xd300 hit when a read/write IO to PCI device is unpended and resubmitted to firmware(SCGCQ00462188)
 -E80D fault running IO in a PCIe Switch config(SCGCQ00462334)
 -EC0F Fault when running IO + Abort Task TM to AHCI(SCGCQ00466209)
 -TM Fail ScsiIO Dev:MID Debug Print Displays Address Rather Than Opcode(SCGCQ00476208)
 -D300 fault during mixed auto/nonauto IO to multiple AHCI devices(SCGCQ00477054 )
 -Extra validation required for Silverhawk PIM1 settings(SCGCQ00484633)
 -SAS/SATA drives go missing while running block move IO and Random TMs(SCGCQ00493178)
 -SAS3.5: PL Status shows parent devH of second switch in cascaded switch setup is zero(SCGCQ00496013)
 -Backend PCIe completion timeout after a PCIe error message is received(SCGCQ00498112)
 -NVMe: IO timeouts with high queue depth PL translated read/write IOs(SCGCQ00498179)
 -SATL: WRITE SAME Handling with LBPRZ=1, UNMAP=1, ANCHOR=0 needs an additional check(SCGCQ00524994)
 -Data corruption runing heavy IO(SCGCQ00551309)
 -NVMe: LUN not validated before use in non read write translations(SCGCQ00562314)
 -Backend PCIe: possible command timeouts in low resource or queue full cases(SCGCQ00600854)
 -Firmaware fault 0x26B5 observed when sending IOUnit Control Message with OPERATION of SAS_PHY_LINK_RESET to PCIe switch dev handle(SCGCQ00601557)
 -Ventura: Fix plInit in which VENTURA_PORTING was eliminated causing ARM to crash(SCGCQ00615099)
 -D300 fault seen when SCSI Mode Select is sent to AHCI device(SCGCQ00630246)
 -Limit the number of phys during spin up configuration for the FPGA (SCGCQ00648198) 
 -Ventura: incorrect bits in interrupt mask(SCGCQ00668609 )
 -Ventura PL: Internal flag may be incorrectly disabled during Abort Task operations(SCGCQ00673302)
 -PL clearing interrupt is not getting reflected in Interrupt observe registers(SCGCQ00674340)
 -Ventura: arm_all compile error in SAS SERDES / Phy Files(SCGCQ00686674)
 -Intruder: Reset of SASCore 1 or 2 was not using correct value to clear reset bits(SCGCQ00698911 )
 -PL incorrectly faults when a non read/write IO to AHCI device hits FxCore exception when started through firmware path.(SCGCQ00700211)
 -PL:Restrict access to RxEEDPBuf in pl dbg(SCGCQ00709358 )
 -Data continues to be sent after RESPONSE for an IO is received before data transmission completed (SCGCQ00710281)
 -pl timestamp print fills ring buffer(SCGCQ00720114)
 -Remove redefinition of IOC_NUM_PHYS(SCGCQ00736730)
 -FW Controlled Spinup: Slot ordered spinup defects(SCGCQ00771112)
-NVMe: rename some structure definitions in the NVMe code(SCGCQ00771188)
 -Intruder FPGA: Data Underruns while doing Target Mode IOs(SCGCQ00776411)
 -Ventura: 430B fault with multiple devices attached(SCGCQ00779488)
 -Intruder FPGA: Fix Repeated Rising Edge Spinup Interrupt(SCGCQ007801970
 -pl: backend PCIe: read/write IOs with chain to native SGLs fail with IoFlags.FastPath set to 0(SCGCQ00813839 )
 -265D fault while running task managements(SCGCQ00817552)
 -Ventura: Fault 430A during intitialization(SCGCQ00825789)
 -Unmap FIS Port Translation Hangs if No Range List Entries are Generated(SCGCQ00844030)
 -Ventura: Fault 265D when pl dbg dumps PtrHwDmaQFreePointer(SCGCQ00852104)
 -Ventura: backend PCIe: D363 fault during PL init when PCIe device structures are placed in DDR(SCGCQ00853886)
 -Ventura: RxEEDP buffer init has wrong size(SCGCQ00855014 )
 -PL: IOs completed with good status when EEDP Check enabled and EEDP error injected with 4096 block size(SCGCQ00855669)
 -Ventrua FPGA: hit Fault 0x5801 running Data Integrity from RedEye(SCGCQ00857273 )
 -Ventura: NVMe: Some SCSI(SCGCQ00860696)
 -Intruder A0: MEDIUM ROTATION RATE is not updated in RIGID DISK GEOMETRY PAGE When MODE SENSE(10) is executed to SATA Drive(SCGCQ00864828)
 -Ventura FPGA: NumberOfSATATargets does not decrement(SCGCQ00866287 )
 -Intruder A0: IDLE and STANDBY CONDITION TIMER's are not updated properly in POWER CONDITION MODE PAGE for NON EPC Drive(SCGCQ00866637 )
 -PL: High latency on non(SCGCQ00867571)
 -PL: Remove unused variable in when sending SATA SCT data(SCGCQ00871675)
 -Ventura: Avoid PCIe device initialization while PCI discovery is active.(SCGCQ00871804 )
 -Host Driver Detects Target Mode Event Errors Regarding Subsystem(SCGCQ00874585)
 -Some PL_ASSERT Cases Could Fail To Detect Out of Range Errors(SCGCQ00896629 )
 -PL: Unnecessary conditional statement in firmware source(SCGCQ00907209)
 -Tiger: Remove usages in of SUCCESS (1) and FAILURE (0) defines(SCGCQ00913505)
 -IOP & PL: Move certain PL structures to use OCM PLB Segment 2(SCGCQ00917625 )
 -Ventura: backend PCIe: incorrect link rate may be reported in PCIe IO Unit Page 0(SCGCQ00925861)
 -PL: 265D fault when injecting errors into the data stream from a SATA drive(SCGCQ00928401)
 -Tiger: Fix it_fpga_dnt build error to pass build all.(SCGCQ00935031)
 -Tiger/PSB function parameters where not updated when Ventura/PDB functino was(SCGCQ00940318)
 -Ventura: Fault d053 running SATA IO (SCGCQ00944751)
 -PL: Fault 0x4300 when removing SATA devices from the topology(SCGCQ01000639)
 -Ventura A0: Fault 0x5828 while running Quarch Cable breaker Quarter phy glitch.(SCGCQ01000813)
 -Tiger: Workaround MPT Endpoint Captured BDF reg writing quirks(SCGCQ01007350)
 -Ventura A0: Fault 0x670A while running TM and SMP commands. (SCGCQ01008734)
 -Tiger FPGA: 0x6815 fault when we should see 0x5821(SCGCQ01012466)
 -Tiger Ventura (SCGCQ01018738)
 -PL: SMP Pass Through to SED attached expanders fail(SCGCQ01018755)
 -Ventura: backend PCIe: issues related to PCIe link configuration(SCGCQ01019734 )
 -PL: PCIe Device Page 0 does not clear Reserved fields(SCGCQ01021410)
 -Ventura: PL Fault 0000d073 (SCGCQ01039143 )
 -Ventura Tiger: Unsupported/Failed Task Managements should also be forwarded to Tiger before failing back to host(SCGCQ01041510)
 -Ventura A0: NVMe drive missing after few Lane/Phy glitches between PCIe switch downstream port and Endpoint(SCGCQ01046725 )
 -Tiger FPGA: Abort Task to SATA can cancel out Fast Path State Machine Expecting Zero IoCount status (SCGCQ01051203)
 -PL: SED attached devices not removed from IOC's device table(SCGCQ01068954)
 -Ventura: B0 requires check of enqueue register before disabling queue manager state machine(SCGCQ01070612)
 -Marlin A0: HBA goes to hung state while sending diag reset (SCGCQ01084604 )
 -Attached expander goes missing while performing controller phy hard resets and config page reads(SCGCQ01110176)
 -Ventura A0: Fault 0xC010 while unloading/loading the drivers in Target mode topology(SCGCQ01116345 )
 -Ventura/Marlin: backend PCIe: recursive fault may occur on PDB SysDma error(SCGCQ01116710)
 -Ventura/Marlin: Fault 0xECD0 seen if switch goes away before all NVME drives attached registered with host.(SCGCQ01126840)
 -PL: MidUsed not cleared when handling FPE Requestor Error(SCGCQ01134948)
 -FW fault 0x265d when unplugging active cable(SCGCQ01154156)
 -PL: Possible null pointer access in a non(SCGCQ01168086)
 -PL: Unchecked function return value in sata code(SCGCQ01169267 )
 -Ventura: PL fault 5811(SCGCQ01184674)
 -Virtual SES Target Not Reported to the Host(SCGCQ01197507 )
 -Ventura: backend PCIe: compatibility tweaks for NVMe devices(SCGCQ01201787 )
 -Ventura: backend PCIe: NVMe IOs may halt when a backend PCIe link recovery occurs(SCGCQ01206643)
- Fault 0xEC3D seen during switch initialization(SCGCQ01210423)
 -PL Fault 0xd077 is seen while drives are pulled with IOs outstanding(SCGCQ01222435 )
 -Fault seen when handling Task Managment with IOs to NVME drives when drive reports media errors.(SCGCQ01226478)
 V-entura/Marlin: backend PCIe: EC84 fault(SCGCQ01229418)
 -Ventura B0: backend PCIe: link gets stuck down after a link break(SCGCQ01231751)
 -Add option to enable support for OEM specific NVMe Enclosures testing(SCGCQ01250846)
 -NVDATA config option to disable PL Virtual SES support(SCGCQ01251655)
 -Ventura MR 7.1, RHEL 7.2: SAS/SATA HDD R0/10/5, OLTP, Q >= 16, Up to (SCGCQ01255912)
 -Checks for reconstruction in place.(SCGCQ01276354)
 -pl: NVMe: Task Set Full handling flag not respected for NVMe(SCGCQ01289543)
 -Ventura/Marlin: backend PCIe: EC0E fault may occur on link down(SCGCQ01292448)
 -Assertion failure in ../../dm/mpt2/mptframe.c at line 788: id!=MPT_FRAME_ALLOC while enclosure powercycle.(SCGCQ01311481)
 -CSET Aggregator: SCGCQ01297325, SCGCQ01289572(SCGCQ01318920)
 -Disable fw messages "cmdId:5e has different completion status for sub commands" when convert 240Pds to Jbod and reboot(SCGCQ01320953)
 -Controller montask after data abort exception handler was called(SCGCQ01324312 )
 -Fix Static Code analysis issues(SCGCQ01325320 )
 -Mode page access to same devId needs to be serialized(SCGCQ01329539)
 -7.3: Need to adjust ProfileMaxDevices for Profiles other than 240 VD Profile(SCGCQ01330851)
 -PA1: fw hit PL D10D while format partition(SCGCQ01333872)
 -8G offload changes ONFI offsets (SCGCQ01336017)
 -PCIe SSD Fails to blink Bad Phy after 5 minutes, on Passive BP with internal adapter(SCGCQ01339684)
 -Assertion failure in ../../dm/src/FindDev.c at line 261 while connecting 10 enclosures to the system(SCGCQ01342054)
 -Ventura MR 7.3 (SCGCQ01342174)
 -After send command to PD to clear LED, don't poll for completion(SCGCQ01342947 )
 -7.3 pk484 unxpctd c_ptr 19804640 tgtId ef while migrate from 2DR1 (SCGCQ01343118 )
 -DEV Defect to address Code Collab defects/comments for CQ# 1304715 & 1320083 (SCGCQ01343240)
 -mix mode: NVMe pd turn to foreign config after couple of OCR.(SCGCQ01344064)
 -7.3: FW hit KA when insert SAS for multipath with 48JBODs in controller(SCGCQ01347504)
 -FW changes to make NVRAM baselines between 7.3 and 7.1 in sync(SCGCQ01348744)
 -Dev Defect: Don't refer LMID before dism start in the case of device hot plug(SCGCQ01350309 )
 -MR7.3 NVME drives in Fast Path iops drop to 0 while in megamon(SCGCQ01353696)
 -NVME profile B was not shown to user(SCGCQ01354313)
 -MR 7.3_FW_PA4: MonTask: line 332 in file ../../raid/taskman.c rst=0 during Patrol read with IO's on 240 VD with media errors.(SCGCQ01356270)
 -7.3 pk564 Crusader taskman when remove sas cable in multipath(SCGCQ01376326)
 -Restore nvram flag allowOnlineCtrlReset after set factory default completes(SCGCQ01378753)
 -lastDmaChannel is updated by both cores without a semlock(SCGCQ01378860 )
 -StorCLI show profile 13 with 8 NVMe drives support(SCGCQ01392900)
 -Data flush to drives after cache offload taking ~250 seconds.(SCGCQ01401796)
 -Update nvram.h with correct size for curAdpPersonality(SCGCQ01404432)
 -BusReadWriteSW() is not reading back the data that was written to make sure data is flushed through PCI buffers(SCGCQ01405191)
 -Reduce number of block(SCGCQ01408312)
 -OEM controller shows random slot number inside HII after hotplugging enclosure(SCGCQ01415422)
 -Disable OOB FW download.(SCGCQ01424907 )
 -OEM controller has incorrect drive enumeration with single IOM(SCGCQ01431119)
- Bugzila 112779 - [SAMSUNG PM863A SSD can not show the "Part Number"/ "FRU Number" information under XCC web w (SCGCQ01435624)
- 9460-8i card connect drive through direct-attached backplane: error LED not on when drop out a drive. (SCGCQ01445040)
 -Single Thread MSI-X and MCTP accesses(SCGCQ01446273)
 -Change CACHE_HEADER_VERSION from 13 to 11(SCGCQ01465054)
 -930-16i Cannot Spinup HDD During System Power On(SCGCQ01470741)
 -When update Toshiba SAS 2.5" 10K 12Gbps 300GB HHD (PN:SH20J34185) controller hangs(SCGCQ01515259)
 -ATA Trusted Receive DMA cmd may not DMA data to host buffer(SCGCQ00123945)
 -Status FIS filelds are zero SATA Passthrough reply for PIO(SCGCQ00141209)
 -When an IO is completed that had the Cuda MID State Table Reply Destination set to '1', the value must be cleared.(SCGCQ00147131)
 -Incorrect TM print for IOs owned by Fast Path Engine(SCGCQ00151628)
- SAS-3 FW FPE Checkpoints Interfere with Code to Decrement the IO Count(SCGCQ00151849)
 -bitfields in SMP Report EDFB Settings response not being processed correctly(SCGCQ00155514)
 -Task Management does not properly recover from out of resources condition(SCGCQ00158320)
 -The code got ported to gen3 incorrectly.(SCGCQ00161663)
 -IOcount would get incremented even though Timer addition failed(SCGCQ00168907)
 -Write IOs stall during task management(SCGCQ00169848)
 -plFpeiAddIOTimer needs to use a unique fault code in its call to PL_VALIDATE_MID. This is provide support for faster debug from customer site.(SCGCQ00170054)
 -When using Fast Path Timer, IO Count could get corrupted(SCGCQ00170066)
 -When Task Set Full revceived from device that has Fast Path IO occuring, IO timeout can occur.(SCGCQ00189418)
 -Fault 0x5844 while running Target Mode IOs(SCGCQ00189760)
 -SATA I/O gets stuck after passthrough command(SCGCQ00190187)
 -Fault 0x26B1(SCGCQ00201183)
 -iopiMemoryMove() called without setting End of List bit in (SGESCGCQ00210189)
 -Invader A0: Fault D025 while pausing completor during timer error(SCGCQ00220525 )
 -Fault 0x6708(SCGCQ00231532)
 -Fault 0x5861 is encountered during Block Move Stress and 5ms Whole Port Glitches(SCGCQ00251812 )
 -TM timeout during enclosure pull push(SCGCQ00257768)
 -When doing Task Managmeent cleanup, an invalid Parity error may be caused by HW cleanup(SCGCQ00280175)
 -Invader B0: (PL) Fast Path getting disabled incorrectly when a pre(SCGCQ00281921)
 -IO hang while running straight IOs on a mix of SAS and SATA drives(SCGCQ00290510)
 -Invader discards valid response data for some SMP from host.(SCGCQ00301259)
 -Fault 61a2 while running IOs on a mix of SAS and SATA(SCGCQ00319691)
 -Invader B0: Remove unused print strings in PL firmware(SCGCQ00326797)
 -Fixed Firmware Bug in Queue Manager(SCGCQ00337252)
 -pl: Need to re(SCGCQ00349888)
 -Fixed devhandle numbering for SAS/SATA devices(SCGCQ00353284)
 -Initial bring up in lab for AHCI(SCGCQ00356058)
 -Need UART commands to show backside PCIe information(SCGCQ00364512)
 -(IOA) Dauntless throws a FPE_CMPL_ERR_FPE_NOT_SET_IN_MID_TABLE error during internal TM's(SCGCQ00365805)
 -No functional change (SCGCQ00365923)
 -No functional change, temporary workaround(SCGCQ00383647)
 -Updated firmware to match latest PCIe hardware(SCGCQ00396444)
 -RAIDContextOfffset field in Message Config Registers are not correct(SCGCQ00397602)
 -1609 Fault with bad AHCI device(SCGCQ00400048)
 -NVMe: Miscompare during block move test with backend NVMe device(SCGCQ00413256
 -PCIe discovery fails with PL 250.04(SCGCQ00422097 )
 -PL: SGL print for debug may not work properly(SCGCQ00433625)
 -SATA Passthrough message to AHCI device gets DEVICE_NOT_THERE status(SCGCQ00447819 )
 -E00E fault occurs during heavy IO to AHCI devices(SCGCQ00449814)
 -PL: ownership of frame containing a non read write IO to a backend PCIe device(SCGCQ00456377)
 -PL:PCI: Chunk of memory is being assigned to Switches while switches don't need this memory(SCGCQ00472124)
 -0xD300 Fault is seen during Stang admin complete interrupt handling.(SCGCQ00473898)
 -PL: D074 fault(SCGCQ00485929)
 -Dauntless FPGA: 584B fault while running block move IO and Random TMs(SCGCQ00503522)
 -Backend PCIe completion timeout prevention bugfixes(SCGCQ00505131)
 -Read of PCIe Device Page 1 or 2 using the get(SCGCQ00518221)
 -NVMe: Fault EC0F during IO (SCGCQ00556768 )
 -(AHCI Only) No Data returned on sending ATA Passthrough with ata command set as 'READ DMA Ext' to an AHCI Device. (SCGCQ00598952 )
 -Replace leftover direct POM accesses in NVMe module with wrapper functions(SCGCQ00649571)
 -Intruder: Fault 6B00 when attaching SATA drive to SAS Core 1(SCGCQ00671376)
 -Fault 0x7C33 when running with SATA drives and TM occurs(SCGCQ00757494 )
 -6001 fault while running TMs in Linux(SCGCQ00771763)
 -pl: backend PCIe: init failure reason bitfield is too small(SCGCQ00776266)
 -Rising edge spinup interrupt needs to be cleared once spinup retry attempts have been exhausted.(SCGCQ00805176)
 -IOP directly accesses PL instead of using PLI(SCGCQ00820292)
 -Round 1 of fixes for issues found while performing basic dev test for PCIe error interrupt path(SCGCQ00843113)
 -PL: Controller reset observed during IO's running when customer specific enclosure is removed from SAS Topology(SCGCQ00859725)
 -PL: STANDBY_Z Bit Not Set in POWER CONDITION MODE PAGE When Mode Sense (10) is executed to NON EPC SATA Drive(SCGCQ00860528)
 -PL: SATA performance drop(SCGCQ00901563)
 -Ventura: backend PCIe: EC0F fault after read/write IO breakup in low resource case(SCGCQ00905252)
 -Tiger FPGA: 0x5854 when posting Trace Buffer during IO(SCGCQ00950016)
 -Ventura: 4F01 fault occurs if SAS and PCIe are both disabled for a phy(SCGCQ01010047)
- PL Fault 0x4852 is seen while breaking a lane of NVMe device attached behind a PCIe switch.(SCGCQ01048805)
- Ventura A0: Abort Task to Intel NVMe device results in IOC status 004a TM Failed(SCGCQ01063063)
 -Coverity defect: The assigned value that is never used.(SCGCQ01090001)
- Ventura: Persistent connection not established with hard drive that supports it. (SCGCQ01110300)
 -makedefs.h was copied to a non existing folder(SCGCQ01183745 )
 -Fault 0xECA0 seen while running IOs to NVMe drives(SCGCQ01263232)
- Ventura/Marlin: backend PCIe: link bandwidth poller keeps calling discovery on failure(SCGCQ01282006 )
 -MR 7.1_Double Dip COL causes loss of disk cache(SCGCQ01311127 )
 -Insertion of Faulty drive results in FW failure.(SCGCQ01321192)
- Assertion failure in ../../hw/inc/3516_inc/memory.h at line 342: isInAddressibleRange(virtualAddr)(SCGCQ01324245)
 -Assertion failure in ../../dm/src/devMgr.c at line 404: devId <= DM_MAX_DEVICE error(SCGCQ01328412 )
 -MonTask:...fusion.c rst=0 with Driver detected possible FW hang(SCGCQ01328760)
 -MR_7.3_FW: Not able to create more than 128 DGs in profile 12.(SCGCQ01332841)
 -Ventura: PL FW may Fault x61A5 during cable pull to an external enclosures with IOs outstanding(SCGCQ01334254)
 -Assertion failure in ../../hw/inc/3516_inc/memory.h at line 342: isInAddressibleRange(virtualAddr)(SCGCQ01334603)
 -MR7.3: while multiple rebuilding on 240LDs, FW prints constantly messages "C0:Rebuild delayforHeadOfQ..............."(SCGCQ01338964)
 -FW breaks at start of restore after a cache offload has occurred.(SCGCQ01343757 )
 -Don't show Profile 11 or allow to change to Profile 11 (NVMe only) if there are SATA/SAS drives present in the Controller(SCGCQ01345727)
 -Upgrade and downgrade across 8GB and 4GB FW crashes(SCGCQ01346593)
 -FW upgrade/downgrade across 7.x stream crashes with OCR/OFU(SCGCQ01351599)
 -Remove unwanted spaces and tabs!(SCGCQ01354410 )
 -MR 7.3 : DC during CopyBack on R6 VD(SCGCQ01372939)
 -MR 7.3 After migration completed then CC see inconistent parity on VD(SCGCQ01373200)
 -timestamp value in FW is incorrect(SCGCQ01376197)
 -AI to fix http://cmappsvr2:8181/ui#review:id=18558 to allow profile change(SCGCQ01379001)
 -MR7.3: Add improvement to profile compatibility determination code for profile show and profile change(SCGCQ01379148)
 -MR PARAMS page 0 does not get updated with the newer ROP that has NVDATA with a change in the same page.(SCGCQ01381617 )
 -MR 7.3 :PL Fault 0000d075 LR 01283991 , while running IO`s , CC and OCR in background.(SCGCQ01384714)
 -MR_7.3: Fw fault observed while R1 with max enclosure with single path power cycle(SCGCQ01388573)
 -Correct via file generation(SCGCQ01390690 )
 -Assertion failure in ../../dm/mpt2/mptTaskMgmt.c while R1 with max drives with cable pull/push [ 5mins delay] (SCGCQ01392076 )
 -Assertion failure in ../../onfi/Onfi2.c at line 6438: cacheSize % onfiHwConfig when do OFU from MR 7.2 GCA to MR 7.3(SCGCQ01392709)
 -JBOD IO's stopped on both MR/iMR Controller, after upgrading/downgrading from MR 7.3 PKG 657 to MR 7.1(SCGCQ01439507)
 -Purley Server: RHEL 7.3 kexec problem(SCGCQ01453576 )
 -MegaRAID with MCTP PCIe VDM not able to be rediscovered by BMC Emulator's MCTP service(SCGCQ01473240 )
 -Updating PL version to 0x03800000(SCGCQ01473873)
 -MR7.3.1 : iMR FW locks up and PSOD seen while trying to flash MR7.2.1 FW ROP(SCGCQ01516986)
 -Possible 0xD093 fault(SCGCQ00147128 
 -Fault 0xD093 when doing completions via Cuda to Firmware(SCGCQ00147274 
 -5110 fault when format unit command was sent to a WD NCQ SATA drive(SCGCQ00158622 )
 -FPGA: 0x2667 fault while printing SGL (SCGCQ00161803)
 -Fault 0x4851 while doing Abandon Class Open Reject testing(SCGCQ00168863)
 -Write verify to SATA does not complete.(SCGCQ00170317)
 -SMP and IOs timeout(SCGCQ00203069)
 -Invader A0: C009 fault while running Target Mode IOs and handling forced EEDP errors.(SCGCQ00204202)
 -PL does not handle completion from IOPCompletionQueue for PL Light IOs(SCGCQ00205349 )
 -PL Firmware attempts to execute out of invalid memory(SCGCQ00219453)
 -Drives lost when running IO and TM(SCGCQ00228742)
 -4A00 fault while injecting overrun error(SCGCQ00281682)
 -Data Corruption when running 1M IO with 32 outstanding IO count(SCGCQ00429490)
 -PCIe Io Unit Page 0 sets invalid AttachedDevHandle when no device attached(SCGCQ00440622 )
 -Abort Task TM duing IOs to AHCI device might cause FW to fault 0x4300(SCGCQ00442746)
 -Clear backend PCIe core DisableReadSideEffect flag(SCGCQ00450125)
 -AHCI: Spurious admin interrupt(SCGCQ00453515)
 -Fix issues encountered while unit testing non read write native SGL handling(SCGCQ00468465 )
 -Fault D300 while running queued IO to a non(SCGCQ00478557)
 -Completion timeout results in lock up(SCGCQ00484088)
 -EC07 Fault during loading of driver(SCGCQ00612644)
 -pl Diag Cmd 'Show Port' Displays additional Port.(SCGCQ00728635)
 -pl: Unbounded wait in plPhyClearErrorRegisters((SCGCQ00768573))
 -Consolidating a subset of CSETs from OEM stream to 7.1 stream(SCGCQ01286561)
 -SEP PD ID is not consistent(SCGCQ01310882)
 -Discount enclosure slots of internal SGPIO enclosure in calculating total number slots of total enclosures in determining whether or not to permit profile change from 11 to 10.(SCGCQ01324371)
 -MR 7.3 PA3 ::Assertion failure in ../../dm/mpt2/mptDirect.c at line 1388:during Enclosure power cycle with Foreign import.(SCGCQ01330382 )
 -(SCGCQ01335393)
 -MR7.3: After all 240PDs configured in Save mode, FW hit EXCEPTION while clear config(SCGCQ01351269)
 -NVMe drives become unconfigured bad after clearing configuration.(SCGCQ01374747)
 -Assertion failure in ../../dm/mpt2/mptTaskMgmt.c at line 746: , while Enclosure push pull(SCGCQ01375147)
 -While trying to import 240 VDs with 144 4k drives, getting hardware error (I2C) in storclif(SCGCQ01379156)
 -optimize fix made in flush path when there are no host ios during bootime(SCGCQ01390863)
 -Issue: ReleaseCandidate stamping still shows the This firmware is a TEST version... banner(SCGCQ01398387)
 -System will pop up “Cannot communicate with iButton to …” during reboot with Dania card (FW:50.2.1(SCGCQ01447988)
 -MR7.3.1_Assertion failure in ../../dma/dmaxor.c at line 1180:(SCGCQ01482384)
 -FPGA: Fault 6600 occurs when inject errors.(SCGCQ00157010)
 -Vendor specific PLI Control Requests not working(SCGCQ00160618)
 -Fault D074 during Destructive Domain Test(SCGCQ00168456)
 -FPGA: Firmware faults if a Response frame is received when in Target Mode.(SCGCQ00168476)
 -Fault 0x4A00(SCGCQ00194907)
 -Fault 0xD060 when sending TM and running heavy fast path IO(SCGCQ00196678)
 -TBM: Recursive faults when faulting in TBM(SCGCQ00241232)
 -Fault 0xD065 on SAS I/Os when timed out by Cuda(SCGCQ00465596)
 -PL:PCI: Debug data does not show information for Switches properly(SCGCQ00485164)
 -NVMe: fix function headers(SCGCQ00562246)
 -ventura: A0 silicon bring up (SCGCQ00941706)
 -Controller freeze and reset while Flushing dirty cache at bootup.(SCGCQ01318861)
 -In double dip case, cache offload is missed due to arming operations not being tied together(SCGCQ01335962)
- FW hit data abort (8d84) when heavy I/O for 15 mins(SCGCQ01339068)
 -rebuild restart from 0 when gracdful shudown or reboot.(SCGCQ01349083)
 -VMWare Passthrough: FW Hang when adapter configured for PCI Passthough and assigned to VM.(SCGCQ01371872)
 -Detect and Notify multiportconnection to same same SasAddress(SCGCQ01384565)
 -CPLD Flashing Error(SCGCQ01389519)
 -Exception Handler Return address 0x01362c7d when boot up(SCGCQ01404373)
 -FW does not respond to MCTP packets when BIOS is disabled (BMC emulator)(SCGCQ01473945)
 -address merge conflict from 73rc to 73lenovo(SCGCQ01499771)
 -FPGA: Target Mode testing with error injection can result in a 0x0501 fault.(SCGCQ00165997)
 -When extra data is sent for an IO started by Fast Path, appropriate error handling doesn't occur.(SCGCQ00197118)
 -Invader A0 : SATA Drive not getting detected.(SCGCQ0022172)
 -Command time out while issuing SATA passthrough requests.(SCGCQ00594631)
 -NVMe Drives Don't Discover on 8 GB Talladega Boards(SCGCQ01291028)
 -H840 montask while running AC cycle test during the 'cache offload testing'. Controller break into montask with Error Data Abort exeption.(SCGCQ01320912 )
 -7.3: NVMes Only pk 462 Fatal firmware error: Line 934 in ../../cpu/arm/exceptions.c when migrate 2DR1(SCGCQ01332424)
 -Raid level migration failing on MR(SCGCQ01337032)
 -Replacing latest NVDATA_CORE XSD to FW source code /fw/xsd.(SCGCQ01361515)
 -MR7.3: Hitting Data Abort exception after OCR during reconstruction.(SCGCQ01374875 )
 -MR 7.3 : on removing the PD's while running IO's on 240vd's and changing the VD policy in loop will result in montask.(SCGCQ01374969 )
 -MR 7.3.1 MixMode(SCGCQ01479653)
 -System will pop up “Cannot communicate with iButton to …” during reboot with OEM custom card(SCGCQ01501209)
 -Ventura BST 7.3(8GB)==>PD pull/insert _Handle DISM timer properly(SCGCQ01341844)
 -MR_7.3.1_Firmware hangs in discovery-(SCGCQ01484421)
  IR Path is not restored after expander connection is reestablished(SCGCQ00136967 port of SCGCQ00126969 )  
  - FW not returning error status on ATA aborted SCSI ATA Passthrough command(SCGCQ00136971 port of  SCGCQ00133038)  
  - Direct attached drive stalls when injected with bad xfer length in DMA setup FIS(SCGCQ00136972 port of SCGCQ00135839 )  
  - BT1680: Command timeout after drive error during workaround(SCGCQ00136974 port of  SCGCQ00136165)  
  - Add 64-bit multiplication, division, and modulus functions to PL(SCGCQ00138469 port of  SCGCQ00138467)  
  - Add 64-bit multiplication, division, and modulus functions to PL(SCGCQ00138470 port of SCGCQ00138467 )  
  - Add/Removal Events for Initiator cease after rebooting a switch(SCGCQ00142385 port of SCGCQ00142382 )  
  - PL: SATA Passthru command fails(SCGCQ00146018 port of SCGCQ00125322)  
  - Invalid Command Sequence following Link Reset(SCGCQ00146633 port of  SCGCQ00145634)  
  - Reset loop after induced TM during IO(SCGCQ00146634 port of  SCGCQ00145842)  
  - 6815 fault running IO and task management(SCGCQ00147872 port of  SCGCQ00147193)  
  - PL: SATA Passthru command fails(SCGCQ00149242 port of  SCGCQ00125322)  
  - Typo in SATA init code could result in wrong block size reported for non-512 SATA drives(SCGCQ00150247 port of SCGCQ00146128 )  
  - ReadCapacity returning 0xFFFFFFFFFFFFFFF on a SATA drive reporting a 0 LBA count(SCGCQ00150248 port of  SCGCQ00147027)  
  - 6815 fault running IO and task management(SCGCQ00150555 port of SCGCQ00147193 )  
  - SAS Device Page 1 data for first drive or single drive was all zero(SCGCQ00150560 port of SCGCQ00144104 )  
  - Possible to send a NCQ command during NCQ error handling(SCGCQ00153303 port of SCGCQ00151226 )  
  - 6001 format when inquiry is issued while format is active to a SATA device(SCGCQ00153305 port of  SCGCQ00151272)  
  - pl: SATL: Support write buffer mode 7.(SCGCQ00153476 port of  SCGCQ00148567)
  - ATAPI tape drive fails any command with Input/output error.(SCGCQ00154669 port of SCGCQ00147948 )  
  - Enable sending 3 identify frames(SCGCQ00155017 port of  SCGCQ00136668)  
  - PL: Add compile option to fault when Discovery detects Discovery Error 0x90 (SMP Timeout(SCGCQ00155434 port of  SCGCQ00149166)  
  - Change DMA engine default threshold values for System and DDR data(SCGCQ00155451 port of SCGCQ00146007 )  
  - Ph8: Host Based Discovery Request change(SCGCQ00155995 port of SCGCQ00147804 )  
  - Fix debug print param count mismatches and add compile-time assertion which detects mismatches(SCGCQ00159373 port of SCGCQ00156731)  
  - SATL: 620F fault with reassign blocks + invalid parameter list header(SCGCQ00160152 port of SCGCQ00153003 )  
  - PL: Msync needed to update VP_ID of SCSI IO request before posting the IO to SAS Core.(SCGCQ00160169 port of  SCGCQ00099988)  
  - (PL-Only  Mask out unused debug code on the IO path when not used(SCGCQ00160518 port of SCGCQ00156191 )  
  - PL: Port Enable and Config page requests timeout during large topology discovery.(SCGCQ00160710 port of SCGCQ00153048 )  
  - Don't fault if TM sent to an Expander(SCGCQ00162814 port of SCGCQ00125874 )  
  - PL: Remove Diagnostic Console prints during PL config page accesses(SCGCQ00162959 port of SCGCQ00155911 )  
  - BT1680: Read failure w/ loginfo 311a0005(SCGCQ00163420 port of SCGCQ00157003 )  
  - Link Reset is happening within one second after getting invalid initial FIS(SCGCQ00163527 port of SCGCQ00157920 )  
  - PL: Poor IO throughput on one drive in a two drive topology(SCGCQ00163602 port of SCGCQ00138378 )  
  - Fault x6815 with Mustang in I/T switching running Target Resets(SCGCQ00163606 port of  SCGCQ00156204)  
  - Fault 0x265D When SMP Discover can't be sent during TM processing(SCGCQ00163736 port of SCGCQ00163609 )  
  - Phase 8 IT: Fault 265D during driver load and device discovery in parallel(SCGCQ00164405 port of  SCGCQ00155966)  
  - PL: Add SAT translation of SCSI Unmap(SCGCQ00168430 port of  SCGCQ00143322)  
  - PL: Add SAT translation of SCSI WRITE SAME with Unmap/Anchor(SCGCQ00168595 port of SCGCQ00163761 )  
  - Port_Not_Required  port of  ) C(SET: IR/WH: Performance improvements for very large IO sizes port of  )  (SCGCQ00152205 (SCGCQ00169767 port of SCGCQ00152205) ) 
  - About Discovery Error(SMP Function Fail & SMP Timeout  of the SAS2008.(SCGCQ00170864 port of SCGCQ00150500 )  
  - "NOT RESPONDING" notification not sent for a device that is attached to a disabled Phy.(SCGCQ00172525 port of SCGCQ00163207 )  
  - Device ADD notification before the host unregistered the device.(SCGCQ00172529 port of  SCGCQ00161874)  
  - IR: Sense data incorrectly interpreted when the valid bit is set.(SCGCQ00172671 port of SCGCQ00170928 )  
  - PL: Debug: Log Descriptor format sense data(SCGCQ00172687 port of SCGCQ00169000 )  
  - BT1680: IOs failed with 31220000(SCGCQ00173290 port of SCGCQ00170382 )  
  - Hard reset does not abort all outstanding target I/Os(SCGCQ00173440 port of SCGCQ00171366 )  
  - pl: PwrMgmt: BT766 part 2 workaround no longer compiles(SCGCQ00173458 port of SCGCQ00171859 )  
  - Read Buffer command to a SATA device could fail unexpectedly(SCGCQ00173461 port of SCGCQ00172041 )  
  - (PL-Only  Fault 0x6001 When requesting Start Immediate commanad(SCGCQ00173462 port of SCGCQ00168440 )  
  - PL: Discovery error 0x82 during enclosure power cycle test.(SCGCQ00174740 port of  SCGCQ00168551)  
  - Potential for data corruption when sending a PIO read command to a 4K sector drive via a SATA passthrough message.(SCGCQ00177383 port of SCGCQ00175847 )  
  - SGPIO Activity LED may blink on a non-IO drive while running IO's to other drives(SCGCQ00178837 port of  SCGCQ00160881)  
  - Reading Dma buffers via snapshot or UART while IOs are in progress(SCGCQ00179463 port of SCGCQ00139946 )  
  - 620F fault on SAS read data overrun(SCGCQ00188488 port of SCGCQ00185996 )  
  - Good status being returned on TM to missing SATA drive(SCGCQ00188688 port of SCGCQ00159495 )  
  - Disabling one phy causes another phy to be reset.(SCGCQ00188692 port of SCGCQ00174380 )  
  - Add debug command to enable printing of set number of dwords of raw frame(SCGCQ00188772 port of SCGCQ00025412 )  
  - SATL: Need to update standard inquiry version descriptors(SCGCQ00188781 port of  SCGCQ00168345)  
  - Indicate SAS connector Phy lanes reversal in Sgpio virtual SMP req(SCGCQ00188870 port of SCGCQ00174969 )  
  - SATA: NCQ read command is not completed after a data underrun or overrun(SCGCQ00199307 port of SCGCQ00185998 )  
  - SATL: Fault 7C22 when translating WriteSame(16  SCSI command(SCGCQ00203750 port of  SCGCQ00199678)  
  - PIO-mode SATA passthrough command hangs(SCGCQ00218121 port of SCGCQ00201227 )  
  - SATA NCQ Write Command sent using SATA Pass Through is not acted in case of NCQ Tag greater than 0 after DMA setup of 6Gbps device.(SCGCQ00218122 port of SCGCQ00193116 )  
  - (PL&IOP  Modify code to improve thunderbolt performance(SCGCQ00218354 port of  SCGCQ00203441)  
  - Entire topology goes missing while injecting errors into DMA Setup FIS(SCGCQ00218404 port of SCGCQ00203694 )  
  - pl: SATA: Queued translated commands to a single SATA drive can cause command failure(SCGCQ00224768 port of SCGCQ00188098 )  
  - SMPs are issued by FW in target only mode during discovery.(SCGCQ00226333 port of SCGCQ00188716 )  
  - IOs become pending for 2 minutes due to faulty SSD drive in topology(SCGCQ00232099 port of  SCGCQ00225408)  
  - pl: SATL: Security Protocol In/Out may leak frames on command failure(SCGCQ00237490 port of SCGCQ00222965 )  
  - Read Long command fails with check condition for a 4K SATA drive.(SCGCQ00237686 port of SCGCQ00215151 )  
  - 0x265D Fault due to using invalid IO information on certain SATA errors.(SCGCQ00239707 port of SCGCQ00208181 )  
  - 5861 fault after link related parity errors(SCGCQ00240778 port of SCGCQ00183364 )  
  - SMP MaxTimeReducedFunctionality = 0 fails to come out of Reduce Functionality(SCGCQ00244103 port of SCGCQ00202349 )  
  - PL: Discovery may not complete for some ports(SCGCQ00244107 port of SCGCQ00208463 )  
  - PL: Event Replay may not occur in certain out of resource situations(SCGCQ00247183 port of  SCGCQ00219985)  
  - PL: Some events may not be sent when the controller is low on resources.(SCGCQ00247466 port of SCGCQ00202904 )  
  - Zero-length read/write commands to SATA drives cause unexpected SCSI_TASK_TERMINATED responses(SCGCQ00250549 port of SCGCQ00204657 )  
  - 5900 fault on ATA Passthrough (Hard Reset(SCGCQ00250550 port of SCGCQ00218730 )  
  - Add NVDATA bit to disable Notify(Enable Spinup(SCGCQ00250752 port of SCGCQ00208630 )  
  - Return Port info in the Device Status Change Event(SCGCQ00250754 port of SCGCQ00208203 )  
  - [internal only] PL: Output to the ring buffer if a Broadcast Reserved 4 is encountered(SCGCQ00252975 port of SCGCQ00189759 )  
  - (BUILD-Only  Create a GHS SDA PL build(SCGCQ00253252 port of  SCGCQ00193624)
  - Disable the internal HW interrupt to the FW for receiving the BROADCAST(Change(SCGCQ00254237 port of SCGCQ00204210 )  
  - PL calls iopiFrameOwned(  with a MID of zero(SCGCQ00254458 port of SCGCQ00205430 )  
  - pl: SATL: Security Protocol In/Out SAT-specific translations may fail(SCGCQ00254697 port of SCGCQ00218425 )  
  - pl: SATL: Add handling of security locked state(SCGCQ00257362 port of SCGCQ00223621 )  
  - Assign all targets and SSP initiators to a non-zero DMA Group(SCGCQ00259862 port of SCGCQ00235650 )  
  - SATA: Partial link power management mode is disabled after dWord sync is lost(SCGCQ00264374 port of SCGCQ00224893 )  
  - Quick remove and attach of SAS Cables Drops Expanders from Topology(SCGCQ00278338 port of SCGCQ00208584 )  
  - Invalid topology change event sent by controller firmware when a device is removed(SCGCQ00279916 port of SCGCQ00231362 )  
  - pl: SATL: Command timeouts with multiple simultaneous non read/write commands(SCGCQ00280552 port of SCGCQ00229723 )  
  - IR was failing drives and marking the volume degraded or broken when under device missing delay(SCGCQ00280559 port of SCGCQ00235638 )  
  - PL: Devices not reported as not responding after an SMP Open Failure in some cases.(SCGCQ00280813 port of SCGCQ00242753 )  
  - Change the behavior of the LBPWS bit on the logical block provisioning VPD page for SATA drives(SCGCQ00281541 port of SCGCQ00231172 )  
  - (Sata Only  Executing Start Stop Unit to move SATA Drive from Standby to Active doesn’t work(SCGCQ00297098 port of SCGCQ00280727 )  
  - Controller may fault on bad response with incomplete write data transfer(SCGCQ00297426 port of SCGCQ00237417 )  
  - SATL: Bad status value for ATA Passthrough (12/16  commands with multiple FIS PIO transfer(SCGCQ00313937 port of  SCGCQ00271456)  
  - Extra 60 Bytes of VPD Page Data is Provided When SCSI Inquiry to VPD Page 0x89 is Executed(SCGCQ00314374 port of SCGCQ00285864 )  
  - PI error reported when PI error detected due to a frame CRC error(SCGCQ00314686 port of SCGCQ00262937 )  
  - (GEMINI  Incorrect data length reported for failed target mode transfers(SCGCQ00315207 port of SCGCQ00281690 )  
  - PL: SAS Device Page 0 may not return correct values(SCGCQ00315211 port of SCGCQ00265379 )  
  - SAS write command may complete successfully if target sends premature response frame(SCGCQ00315638 port of SCGCQ00264854 )  
  - (Sata Only  SCSI command 0x9E with service action 0x00 is not failed by SATL.(SCGCQ00317010 port of SCGCQ00282613 )  
  - SAS2 IT - Phase 14 – Request Sense SCSI Command data is incorrect for a SATA Drive During Stanby Power Condition Mode(SCGCQ00317952 port of SCGCQ00283312 )  
  - Read Long command to SATA device does not complete(SCGCQ00319992 port of SCGCQ00143655 )  
  - 7E12 fault with BT1680 and defective SATA drive(SCGCQ00320007 port of SCGCQ00188344 )  
  - SATL: improved handling of CHECK POWER MODE response(SCGCQ00320029 port of SCGCQ00231519 )  
  - Fault 4300 observed during reset all Expander phys with IOs(SCGCQ00320034 port of SCGCQ00238905 )  
  - ATA Error to SCSI Sense Translation Cleanup(SCGCQ00320036 port of SCGCQ00245732 )  
  - PL: Discovery print too long(SCGCQ00320039 port of  SCGCQ00251472)  
  - (Sata Only  Mode Select (10  to POWER CONDITION Page is Failed When IDLE CONDITION TIMER is Set to Non-Zero Value(SCGCQ00320050 port of SCGCQ00280725 )  
  - SAS2 IT - Phase 14 – Allocation Length for SCSI READ MEDIA SERIAL NUMBER Command is not Handled Properly(SCGCQ00320053 port of SCGCQ00283688 )  
  - pl: SATL: Sense data Valid bit and Information field may not be populated correctly(SCGCQ00320056 port of SCGCQ00284265 )  
  - pl: SATL: Translation for foreground SELF TEST CODE field in Self Test Results log is incorrect(SCGCQ00320060 port of  SCGCQ00286118)  
  - SAS2 IT-Phase 14-SATL-'Additional Sense' incorrect for REQUEST SENSE wrt. state transition sequence Standby->Active->Stop(SCGCQ00320064 port of SCGCQ00299765 )  
  - SATL translation happens in firmware for a Persistent Reservation Command with SA=3 for a Invalid PLL(SCGCQ00320750 port of SCGCQ00286094 )  
  - 0x265D Fault occurs when Inquiry to page code 0xB1 issued while a drive is under format or self-test.(SCGCQ00320752 port of SCGCQ00283697 )  
  - (Sata Only  READ MEDIA SERIAL NUMBER SCSI Command Return’s data for Incorrect SERVICE ACTION field(SCGCQ00321368 port of SCGCQ00283320 )  
  - SAS2 IT - Phase 14 – Allocation Length for SCSI INQUIRY Command is not Handled Properly(SCGCQ00321662 port of SCGCQ00280880 )  
  - PL: Allow ReportDeviceMissingDelay to be set to 1 sec(SCGCQ00323830 port of  SCGCQ00249951)  
  - ATA Trusted Receive DMA cmd may not DMA data to host buffer(SCGCQ00335403 port of SCGCQ00123945 )  
  - SATA commands take too long when unit attention set or SATA init is needed(SCGCQ00335410 port of SCGCQ00163455 )  
  - SAS 1.1 drive connected to 2008(SCGCQ00335437 port of SCGCQ00260362 )  
  - SAS2 IT: PL Fault 0x4203 seen when trimming LBA's out of Range(SCGCQ00335451 port of SCGCQ00328153 )  
  - PL: Configurable AWT for Expanders(SCGCQ00335507 port of SCGCQ00241199 )  
  - PL: SATA IO aborts with log info code 0x31120D02(SCGCQ00406361 port of  SCGCQ00320469)  
  - Read buffer command with non zero buffer offset doesnt behave as expected.(SCGCQ00411503 port of SCGCQ00328086 )  
  - SAS2 IT - Phase 15 – No Data Returned for VPD Page 0xB0, 0xB1 and 0xB2 During SATA Drive Format(SCGCQ00412533 port of SCGCQ00337310 )  
  - Invader B0: PL FPE - In Fpe Init remove memsets to 0 to reduce boot time.(SCGCQ00414350 port of SCGCQ00310854 )  
  - SAS2 IT - Phase 15 – Allocation Length for INQUIRY SCSI Command is not Handled Properly during SATA Drive Format(SCGCQ00416127 port of SCGCQ00334559 )  
  - pl: SATL: Report Luns command sent to SATA drive fails if the drive is spun down(SCGCQ00426177 port of SCGCQ00333109 )  
  - An expander goes missing during cable pull testing and doesn't come back on subsequent discovery attempts(SCGCQ00427246 port of SCGCQ00255659 )  
  - Set phy polarity base on nvdata(SCGCQ00434193 port of SCGCQ00345786 )  
  - Wrong Index value being passed to plInterruptTrackerRecord( .(SCGCQ00434943 port of SCGCQ00350600 )  
  - EDFB: report actual drive link rate in SAS Expander Page 1(SCGCQ00435531 port of SCGCQ00182604 )  
  - Faulty drive causes timeouts on other devices(SCGCQ00436186 port of SCGCQ00231960 )  
  - PL: Configurable SMP retries(SCGCQ00437960 port of SCGCQ00271092 )  
  - Invader C0: SATA PM – Fault 0x6B02 on SATA_PMNAK response to PM Control Request.(SCGCQ00439686 port of SCGCQ00391006 )  
  - PL Library customer not seeing links come up starting in .107 build(SCGCQ00439740 port of SCGCQ00379260 )  
  - Invader: IO timeouts while running IOs on Intel SSDs(SCGCQ00445285 port of SCGCQ00361587 )  
  - The wrong amount of data is transferred when INQ to VPD page 0x89 is received while a device is doing self-test or a format.(SCGCQ00445309 port of SCGCQ00337293 )  
  - (Sata Only  SATL fails UNMAP command with zero Parameter List Length(SCGCQ00445310 port of SCGCQ00329909 )  
  - Invader: Enable SAS Core Parity Interrupts(SCGCQ00449638 port of SCGCQ00361839 )  
  - Remove power management control flags from Manufacturing Page 3(SCGCQ00450890 port of SCGCQ00293362 )  
  - Invader C0: Firmware should fault if a parity error is deteced while reading asynchronous event from fast path hardware.(SCGCQ00451375 port of SCGCQ00377564 )  
  - Invader: Fixed Link Layer Parity Checking Prints(SCGCQ00459049 port of SCGCQ00356530 )  
  - Invader B0: Firmware not using correct start address while handling data overrun interrupt(SCGCQ00462166 port of SCGCQ00351468 )  
  - INQUIRY SCSI Command is not Failed for Unsupported VPD Page during SATA Drive Format(SCGCQ00462496 port of SCGCQ00334577 )  
  - Data TLB Error exception while running the BST.(SCGCQ00463051 port of SCGCQ00377481 )  
  - Invader: Fixed Issue Found in Data Overrun Testing Where IOs Were Being Incorrectly Completed(SCGCQ00463429 port of SCGCQ00363670 )  
  - (Sata Only  UNMAP command with "Number of Logical Blocks" set to 0 fails with command Abort(SCGCQ00464332 port of SCGCQ00328206 )  
  - Medium type field populated incorrectly in device mode page header.(SCGCQ00464390 port of SCGCQ00329954 )  
  - pl: SATL: Commands may fail after Write Same command failure(SCGCQ00466477 port of SCGCQ00328222 )  
  - Serdes settings to fix 12G SSC profile(SCGCQ00468679 port of SCGCQ00343925 )  
  - PHY InvTxData/InvRxData polarity may not change with Ext Manufacturing Page 40 settings(SCGCQ00469138 port of SCGCQ00393297 )  
  - Invader C0: replace msync with FLUSH_WRITE during manual IO count increment(SCGCQ00469143 port of SCGCQ00383667 )  
  - PARAMETER CODE, FORMAT AND LINKING and PARAMETER LENGTH are Not Populated in Self-Test Results Log Page(SCGCQ00469847 port of SCGCQ00339497 )  
  - SAS2 IT - Phase 15 – When SATA Drive is Moved to Active Power Condition from Idle Using START Bit, ASC/ASCQ is Incorrect(SCGCQ00470270 port of SCGCQ00336534 )  
  - Fix merge error(SCGCQ00470571 port of SCGCQ00393421 )  
  - SAS2 IT - Phase 15 – REQUEST SENSE's ASCQ is Incorrect When SATA Drive State Transition Happens (ie  Active->Stopped->Idle(SCGCQ00472074 port of SCGCQ00334642 )  
  - Cobra / Fury performance with Lightening 6G SAS SSD drives(SCGCQ00472476 port of SCGCQ00377946 )  
  - (GEMINI  Perf Enhancement - Move RL data to CRAM (also create mreq m command(SCGCQ00472914 port of SCGCQ00146873 )  
  - Program the pre-loaded preset used to lock-in the bitstream at the start of Tx Training(SCGCQ00473943 port of SCGCQ00354681 )  
  - Transmitter Training Part 1(SCGCQ00474680 port of SCGCQ00357497 )  
  - Add C0 SAS Phy SerDes initialization checks.(SCGCQ00476791 port of SCGCQ00378432 )  
  - Transmitter Training Part 2(SCGCQ00480619 port of SCGCQ00364214 )  
  - PL: Transmitter training part 3(SCGCQ00480624 port of SCGCQ00370018 )  
  - Invader C0: Performance drops with PL version 0.250.113.0 on 2 R0 volumes behind Cobra(SCGCQ00494101 port of SCGCQ00400569 )  
  - SMP Passthrough request may fail(SCGCQ00495883 port of SCGCQ00378926 )  
  - Fixed Bug in SATA Link Reset Code Which Could Stall the Task Management Request(SCGCQ00498486 port of SCGCQ00399690 )  
  - PL: Check iopiMemoryMove(  Return Status - SATL Inquiry Command Translation(SCGCQ00498849 port of SCGCQ00419472 )  
  - PL: SAT3 Compliance - Implement Translation of Set Timestamp Command (Disabled(SCGCQ00503815 port of SCGCQ00357128 )  
  - RxFM power management control workaround(SCGCQ00523847 port of SCGCQ00523419 )  
  - PL: SAT3 Compliance - Implement Translation of Report Timestamp Command (Disabled(SCGCQ00528525 port of SCGCQ00357126 )  
  - PL: Possible performance drop in small topologies.(SCGCQ00529283 port of SCGCQ00386639 )  
  - Invader C0: Fixed Problem with Lost Mismatch Connection Causing Channel Lockup on Link(SCGCQ00529286 port of SCGCQ00390972 )  
  - Update serdes settings due to B0->C0 hardware change(SCGCQ00530334 port of  SCGCQ00391401)  
  - Invader C.0: Power Management port width modulation phy states is wrong when Communicate Intent feature is turned off.(SCGCQ00530403 port of SCGCQ00392186 )  
  - Invader C0: Minor Fix to Task Management Interface Function(SCGCQ00531090 port of SCGCQ00395280 )  
  - Invader C0: Fix Comment in plTaskMgmtCleanup((SCGCQ00531098 port of SCGCQ00395191 )  
  - PL: Check the parameter range when handling pli temperature request(SCGCQ00549033 port of SCGCQ00415150 )  
  - PL: Zero out some internal structures(SCGCQ00549876 port of SCGCQ00245480 )  
  - Flag RxEEDP general control PortRecieveMode field with DONOTUSE as per [SAS3Core]1086(SCGCQ00551612 port of SCGCQ00413969 )  
  - Invader incorrectly programs route entries on expanders(SCGCQ00553032 port of  SCGCQ00243512)  
  - Fixed Cases of IocNum Parameter Hard Coded to 0 in Calls to iopiMemoryMove((SCGCQ00553035 port of SCGCQ00377294 )  
  - Cable Management: Link rate doesn't go upward when higher speed rated cables are used(SCGCQ00553038 port of SCGCQ00392871 )  
  - PL: SAT3 compliance - Support additional modes for Write Buffer command translation (Disabled(SCGCQ00553455 port of SCGCQ00357130 )  
  - PL: SAT3 compliance - Support for ATA EPC in SCSI Start Stop Unit command translation.(SCGCQ00553489 port of SCGCQ00357136 )  
  - PL: SAT3 Compliance – Implement Power Condition Mode Page translation with ATA EPC.(SCGCQ00553528 port of SCGCQ00406792 )  
  - PL: Host Based Discovery HBD Phy Event contains incorrect PhysicalPort field(SCGCQ00554333 port of SCGCQ00442735 )  
  - PL Host Based Discovery updates for Gen 3(SCGCQ00556327 port of SCGCQ00395436 )  
  - PL: Move temperature sensor init code down to PL(SCGCQ00556330 port of SCGCQ00410822 )  
  - Fixed Incorrect Fault Code When Link Up/Down Data Parity Error Workaround is Disabled(SCGCQ00557359 port of SCGCQ00414630 )  
  - Fixed Unnecessary Fault Occuring in Switching I/O with Task Management Test(SCGCQ00557361 port of SCGCQ00415922 )  
  - (PL  0x5805 Fault during IO + Task Management test(SCGCQ00562814 port of SCGCQ00433677 )  
  - SMP Discovery Error 90 after issuing Reset Task Management on Initiator(SCGCQ00563450 port of SCGCQ00437449 )  
  - Added Cleanup Code in Tx Context Manager for SSP Payload Only DMA Entry Type(SCGCQ00563453 port of SCGCQ00437532 )  
  - IO on a SATA SSD configured as JBOD pending with PL does not complete(SCGCQ00566089 port of SCGCQ00407250 )  
  - Fixed SATL Translation of Mode Sense Command(SCGCQ00566097 port of SCGCQ00425017 )  
  - IOP: Memory Coherency not enabled in Detroit(SCGCQ00566099 port of SCGCQ00432917 )  
  - Host Based Discovery: IOs sent to the controller may never be responded to(SCGCQ00566116 port of SCGCQ00450812 )  
  - Invader: The CLI commands need to have their text consistent.(SCGCQ00566120 port of SCGCQ00457380 )  
  - iop pci commands need to be updated to use dword instead of word to be consistent(SCGCQ00566123 port of SCGCQ00457386 )  
  - cli command - pl sfr (Display Starfish register  faults firmware 0x265D(SCGCQ00566127 port of SCGCQ00457395 )  
  - Invader: pl fpe mgrdstt cannot be called. pl fpe mgrds gets called instead.(SCGCQ00566133 port of SCGCQ00457412 )  
  - Invader: pl tbm reg display's the wrong description. It should not say "Show FPE register"(SCGCQ00566134 port of SCGCQ00457414 )  
  - Discovery Event 0x90 when resetting all expander PHYs(SCGCQ00566148 port of SCGCQ00462914 )  
  - it_min build fails due to warning of unused variables(SCGCQ00566155 port of SCGCQ00469968 )  
  - PL: Fault 0x6001 while running heavy IOs and performing cable break of the initiator port.(SCGCQ00566162 port of SCGCQ00479492 )  
  - Fixed Issue with SATL Translation of SCSI Unmap Command(SCGCQ00566164 port of SCGCQ00480302 )  
  - PL: SATL does not send ATA Verify command during SCSI REASSIGN BLOCKS command(SCGCQ00566169 port of SCGCQ00484062 )  
  - PL Host Based Discovery: DataBolt Settings fail to take effect(SCGCQ00566176 port of SCGCQ00488529 )  
  - Fixed Issue with SATL Translation of SCSI Write Buffer Command(SCGCQ00566177 port of SCGCQ00490755 )  
  - Data Corruptions on Cobra C1 (no impact on SAS drives(SCGCQ00566178 port of SCGCQ00490921 )  
  - Fault 0x5851 during Destructive Domain test (Bobcat setup .(SCGCQ00566181 port of SCGCQ00494410 )  
  - PL: Query Task Doesn't Check for its Taskmid on FPE Exception Queue(SCGCQ00566189 port of SCGCQ00518804 )  
  - Fixed Issue in Fast Path Engine Manager State Machine Causing SATA IO Timeouts After Target Reset(SCGCQ00566196 port of SCGCQ00527860 )  
  - Valid flag for querying internal temperature sensor(SCGCQ00566217 port of SCGCQ00419361  )  
  - Enclosure/Slot based re-ordering of SAS Topology List Event(SCGCQ00566231 port of  SCGCQ00472198)  
  - Check iopiMemoryMove(  Return Status - SATL Mode Select, Read/Write Buffer, Log Select Commands(SCGCQ00566234 port of SCGCQ00472375 )  
  - Check iopiMemoryMove(  Return Status - SATL Log Sense, SMART Commands(SCGCQ00566235 port of SCGCQ00473154 )  
  - Check iopiMemoryMove(  Return Status - SATL Persistent Reserve Out, Read Media Serial Number, Reassign Blocks Commands(SCGCQ00566239 port of SCGCQ00473841 )  
  - Added Flush Write in Hardware Cleanup Code(SCGCQ00566240 port of SCGCQ00475639 )  
  - Check iopiMemoryMove(  Return Status - Rx Context Manager Interrupt Handler(SCGCQ00566245 port of SCGCQ00477144 )  
  - Check iopiMemoryMove(  Return Status - SSP Frame Received(SCGCQ00566252 port of SCGCQ00477836 )  
  - PL: Limit the Serdes temperature sensitivity workaround to 12G only(SCGCQ00566254 port of SCGCQ00478534 )  
  - Invader: Remove A0 support in firmware(SCGCQ00566260 port of  SCGCQ00488494)  
  - Allow users to select Transmitter Training preset in NVDATA(SCGCQ00566264 port of SCGCQ00501485 )  
  - PL: Flush Writes in TRx Transport Hardware Cleanup to Ensure Robustness(SCGCQ00566270 port of SCGCQ00522360 )  
  - Invader C0: (PL  0x6003 fault During TM and IO in Linux(SCGCQ00568123 port of SCGCQ00448659 )  
  - Update comments above PL prints for all the SATA files(SCGCQ00568408 port of SCGCQ00441329 )  
  - Modify a TxDma clean up print to show more info(SCGCQ00568423 port of  SCGCQ00501705)  
  - SAS2 IT - Phase 17 – "Device Present" Flag of SAS Device Page0 is not Set for Initiator Controller in Target Mode Controller(SCGCQ00568484 port of SCGCQ00449767 )  
  - Incorrect sense info obtained for a Request sense command during Read IO's(SCGCQ00568497 port of SCGCQ00448886 )  
  - SAS2IT: Incorrect SAT translation observed when sending a Security IN command with zero Allocation length with INC_512=1(SCGCQ00568500 port of SCGCQ00452375 )  
  - VALID Bit and INFORMATION Field are Not Handled in Sense Data for failing WRITE AND VERIFY Command(SCGCQ00568502 port of SCGCQ00455555 )  
  - SAS2 IT - Phase 17 – "Device Present" Flag of SAS Device Page0 is not Set for Initiator's Controller in SAS Topology(SCGCQ00568503 port of SCGCQ00462765 )  
  - Fixed SATA Passthrough Non-Auto IO Timeout(SCGCQ00596634 port of SCGCQ00570909 )  
  - Fixed Simple Coding Issue Leading to 0x6230 Fault(SCGCQ00675425 port of SCGCQ00643835 )  
  - Fault 6230 While Disabling Expander Phys and Running Stress in Multi-Path Failover Environment(SCGCQ00698228 port of SCGCQ00692652 )  
  - Fault 0x6230 While Running Heavy IOs and Cable Breaking(SCGCQ00698229 port of SCGCQ00669775 )  
  - PL: Target Mode performance improvements(SCGCQ00711575 port of SCGCQ00686570 )  
  - PL: Trace Buffer Manager performance improvements(SCGCQ00711576 port of SCGCQ00685828 )  
  - PL Fault 0x5851 is seen when running Query Task(SCGCQ00724357 port of SCGCQ00715239 )  
  - 0x6828 fault when using large CDB(SCGCQ00725157 port of SCGCQ00580326 )  
  - Target Mode: Task IU is sent to the IOP before it knows about the Initiator(SCGCQ00725158 port of SCGCQ00606248 )  
  - Internal Device Reset storm after controller reset using Long CDB.(SCGCQ00725161 port of SCGCQ00626891 )  
  - Change SATL handling for SCSI Format command to issue Write DMA Ext instead of Write FPDMA(SCGCQ00725163 port of SCGCQ00660847 )  
  - 12G SAS BC train fails with 6M cable between Fury and Cobra(SCGCQ00725164 port of SCGCQ00678053 )  
  - PL: Identify SSD firmware faults with code 0x4203(SCGCQ00725169 port of SCGCQ00702760 )  
  - PL: Identify SSD topology restrictions cause fault 0xD10F when device access is disabled(SCGCQ00725170 port of SCGCQ00702988 )  
  - PL: Identify SSD feature blocks IOs when DMD starts, not DMD ends(SCGCQ00725171 port of SCGCQ00705318 )  
  - PL: Identify SSD feature on SATA drives could cause discovery failures(SCGCQ00725172 port of SCGCQ00707367 )  
  - PL: Incorrect use of IOP LogInfo code(SCGCQ00725173 port of SCGCQ00709517 )  
  - PL: Topology restriction IO blocking should return a SCSI IO error(SCGCQ00725177 port of SCGCQ00706229 )  
  - PL: Topology restrictions should wait for the entire topology to be discovered(SCGCQ00725178 port of SCGCQ00707329 )  
  - PL: Low read/write throughput for SATA when interspersed with non-automated commands.(SCGCQ00725185 port of SCGCQ00666811 )  
  - pl SATL: Incorrect SAT error translation observed during Writesame command execution(SCGCQ00725203 port of SCGCQ00501272 )  
  - Information field is incorrectly populated for Verify command when accessing out of range LBA(SCGCQ00725205 port of SCGCQ00501346 )  
  - SATL: WRITE SAME Handling with LBPRZ=1, UNMAP=1, ANCHOR=0 needs an additional check(SCGCQ00725207 port of SCGCQ00524994 )  
  - PL: Reduce IOC Link Up Initialization Time(SCGCQ00725208 port of SCGCQ00414458 )  
  - Invader C0: Incorrect sense info obtained for a Request sense command during Read IO's sent to Fast Path Engine(SCGCQ00725223 port of SCGCQ00480300 )  
  - PL: Expander route tables not configured the same as with Self Configuring Expanders(SCGCQ00725227 port of SCGCQ00529543  )  
  - PL: EDFBMaxGroupUnload should be configured even when EDFB is disabled(SCGCQ00725228 port of SCGCQ00530731 )  
  - Uart function to access starfish register is broken(SCGCQ00725232 port of SCGCQ00564809 )  
  - Invader C0: MPI PM Global Request Change to Reduced or Standby state results in "Operation State Not Supported" or "IOC Busy"(SCGCQ00725237 port of SCGCQ00584284 )  
  - Fault 0xD071 while running stress and glitching all 4 phys(SCGCQ00725242 port of SCGCQ00590502 )  
  - Extra byte of data is provided when Inquiry command is issued for "Supported VPD Pages VPD Page" to a SATA Drive(SCGCQ00725248 port of SCGCQ00601768 )  
  - PL: Missing compile-in conditions for WA specific strings(SCGCQ00725251 port of SCGCQ00602540 )  
  - Fixed Problem in RxDMA Credit Leak Hardware Workaround(SCGCQ00725252 port of SCGCQ00602691 )  
  - Fixed Issue in Transport Layer Retries Code Causing 0x265D and 0x0501 Faults(SCGCQ00725256 port of SCGCQ00609576 )  
  - Need a method to disable PL Light print in IO path(SCGCQ00725259 port of SCGCQ00632446 )  
  - PL: Support Checking of iopiMemoryMove(  Return Status in plFailScsiIoWithCheckCondition((SCGCQ00725271 port of SCGCQ00477832 )  
  - DFE tuning(SCGCQ00725276 port of SCGCQ00505626 )  
  - SATL: Implemented Power Condition VPD Page (0x8A  for Inquiry Command(SCGCQ00725278 port of SCGCQ00524989 )  
  - Compile out unnecessary debug strings(SCGCQ00725285 port of SCGCQ00604550 )  
  - PL: Update some RxCM register definition(SCGCQ00725304 port of SCGCQ00650116 )  
  - PL: New commands useful for debugging(SCGCQ00725309 port of SCGCQ00228558 )  
  - PL: SATL Firmware doesn't return sector count in status return descriptor properly for non-data transfer ATA passthrough commands(SCGCQ00725315 port of SCGCQ00692885 )  
  - ATA Translation of sector count in sense data is inconsistent for READ DMA pass-through cmd(SCGCQ00725316 port ofSCGCQ00712688  )  
  - Unsupported SCSI Command fails with Incorrect Sense Data When SATA Drive is in Standby Power Condition(SCGCQ00725328 port of SCGCQ00654721 )  
  - PL: PortWidth field in SAS Port Page 0 is incorrect(SCGCQ00725336 port of SCGCQ00622522 )  
  - Fixed multiple order of operation bugs(SCGCQ00725346 port of SCGCQ00626966 )  
  - SR-IOV: Devices invisible to VF are listed in SAS IO Unit Page 0(SCGCQ00725349 port of SCGCQ00661386 )  
  - PL: Add fault code to indicate coding error in cable management code(SCGCQ00725358 port of SCGCQ00668692 )  
  - PL fault 0xD073 while running IOs(SCGCQ00725362 port of SCGCQ00628654 )  
  - Inquiry SCSI Command is Not Failed with Expected Response When NACA bit in Control Byte is set during During Format(SCGCQ00725376 port of SCGCQ00649572 )  
  - RAID Flags and CDB fields are corrupted after Fast Path Engine rejects FastPath ATA NATIVE COMMAND(SCGCQ00725383 port of SCGCQ00584505 )  
  - PL: Poll for parity error in FPE PLB Slave(SCGCQ00725388 port of SCGCQ00645401 )  
  - PL: Sata passthrough I/Os could complete before firmware cleans up the hw(SCGCQ00762562 port of SCGCQ00447782 )  
  - Fix build(SCGCQ00781297 port of SCGCQ00702695 )  
  - PL: Fix Target command free VPID base address structure definition(SCGCQ00781299 port of SCGCQ00704511 )  
  - PL: Fix how some prints spell "event"(SCGCQ00781302 port of SCGCQ00718795 )  
  - IOP: Force sequence point evaluation(SCGCQ00781306 port of SCGCQ00728929 )  
  - Verify (16  SCSI Command is Not Failed with Expected Response When Specified LBA Exceeds the Capacity of the Medium(SCGCQ00781319 port of SCGCQ00703423 )  
  - WRITE SAME(10  and WRITE SAME(16  SCSI commands are not working for the last LBA of SATA Drive(SCGCQ00781320 port of SCGCQ00703433)  
  - Fault 0x4203 When WRITE AND VERIFY (16  Command Is Executed to SATA Drive For LBA Out of Range(SCGCQ00781324 port of SCGCQ00705320 )  
  - During SATA Drive Format or self test, One Extra Byte of Data is Provided When Inquiry VPD "Supported VPD Pages VPD Page" is requested(SCGCQ00781325 port of SCGCQ00706016 )  
  - During SATA Drive Format or self test, firmware does not handle Allocation Length of zero for INQUIRY SCSI Command Properly(SCGCQ00781327 port of SCGCQ00706055 )  
  - Incorrect VPD Data is Obtained for VPD Page 0xB0 and 0xB2 When Drive is Under Foreground Extended Self-Test(SCGCQ00781328 port of SCGCQ00706063 )  
  - Read/Write 16 or 32 commands are Not Failed with Descriptor Format Sense Data when LBA is greater than 4 bytes.(SCGCQ00781330 port of SCGCQ00706963 )  
  - Unsupported POWER CONDITION Field in SCSI Start Stop Unit Command Not Failed with Check Condition(SCGCQ00781333 port of SCGCQ00710138 )  
  - Additional sense:Invalid cmd opcode, when read cmd sent to SATA drive in standby mode(SCGCQ00781339 port of SCGCQ00711813 )  
  - Fault 1901 Seen When Running Unmap IO’s During Task Aborts For a SATA Drive(SCGCQ00781340 port of SCGCQ00711858 )  
  - SATL doesn't handle ATA Pass-through (16  properly when Extend bit is cleared(SCGCQ00781348 port of  SCGCQ00715484)  
  - PL: Fix minor code issues found by analysis tool(SCGCQ00781349 port of SCGCQ00728016 )  
  - PL: Uninitialized variable being used in PL SATL Function(SCGCQ00781350 port of SCGCQ00728091 )  
  - PL: Firmware could be using uninitialized pointers in SGPIO error cases(SCGCQ00781360 port of SCGCQ00728894 )  
  - PL: SAS Topology Change List Event could send indeterminate ExpanderStatus(SCGCQ00781363 port of SCGCQ00729597 )  
  - PL: Firmware could be accessing null pointer in port layer interrupt handler.(SCGCQ00781369 port of SCGCQ00730721 )  
  - PL: Transport Layer Retry code was using a wrong value for a comparison(SCGCQ00781374 port of SCGCQ00731663 )  
  - PL: clear interrupt when AWT hits max value(SCGCQ00781381 port of SCGCQ00644555 )  
  - PL Target Mode: Implement multi reply queue handling of command buffers(SCGCQ00781392 port of SCGCQ00709549 )  
  - 0x58A1 fault occurs on partner controller while issuing MUR to a target mode controller with outstanding IOs(SCGCQ00781401 port of SCGCQ00680151 )  
  - Update PL firmware to have capability to not fault on Rx/Tx DMA engine SYS_DMA error(SCGCQ00785193 port of SCGCQ00678819 )  
  - PL: SATA code should check the return value of the function call(SCGCQ00793912 port of SCGCQ00736838 )  
  - PL: TLR: Tape drive backup could fail(SCGCQ00793921 port of SCGCQ00731689 )  
  - PL: PL code is not checking the return value of a function call(SCGCQ00793924 port of SCGCQ00736833 )  
  - PL: PL code is not checking the return status of a function call(SCGCQ00793925 port of SCGCQ00737080 )  
  - PL: Target mode code is not checking the return status of a function call(SCGCQ00793926 port of SCGCQ00737139 )  
  - PL: Task Management code is not checking the return status of a function call(SCGCQ00793927 port of SCGCQ00738131 )  
  - PL: Firmware is not checking the return status of a function when reading device page 0(SCGCQ00793929 port of SCGCQ00750552 )  
  - Target Mode performance improvements(SCGCQ00793943 port of SCGCQ00698205 )  
  - PL: Trace Buffer Manager add entry algorithm improvement(SCGCQ00793947 port of SCGCQ00740643 )  
  - PL: Yellow LED Function Code control LEDs using MfgPage13 for link up and link speed(SCGCQ00793949 port of SCGCQ00741955 )  
  - PL: SATA Spinup Hinting(SCGCQ00793954 port of SCGCQ00767301 )  
  - SES Page 0Ah Element Index mapping support for enclosure(SCGCQ00816410 port of SCGCQ00791963 )  
  - PL: Fault 0xD203 observed while releasing Diag Buffer (TRACE(SCGCQ00816415 port of SCGCQ00792742 )  
  - WW PL: Add MPI PCIe Device driver(SCGCQ00832573 port of SCGCQ00795210 )  
  - Tiger WW: Add Storage Expansion Device interrupt handler and initialization(SCGCQ00837237 port of SCGCQ00797527 )  
  - Tiger WW: Change how remote SAS core interrupts are handled(SCGCQ00837761 port of SCGCQ00798076 )  
  - PL: Controller could fault with 0x4A00 during link breaker test(SCGCQ00840579 port of SCGCQ00793956 )  
  - Tiger WW: Update SED MPI messages to 0.2 revision(SCGCQ00841600 port of SCGCQ00831478 )  
  - Certain drive pull scenarios result in longer time to discovery running than normal(SCGCQ00843979 port of SCGCQ00842344 )  
  - PL: Firmware should return an error if an invalid slot number is sent in a MPI SEP request(SCGCQ00848133 port of SCGCQ00824715 )  
  - PL: Firmware adjust external enclosure slots using StartSlot(SCGCQ00848135 port of  SCGCQ00824739)  
  - Incorrect IOCStatus status for SATA IOs during task management(SCGCQ00848141 port of SCGCQ00762311 )  
  - PL: Mode sense command with mode page 4 does not return proper Medium Rotation Rate (SATA(SCGCQ00848144 port of SCGCQ00811739 )  
  - PL: Target Status Send request doesn't get a reply and cause Target mode I/O timeout(SCGCQ00848146 port of SCGCQ00814468 )  
  - PL: Tweak conditions where the SMP Timeout Discovery Error gets reported(SCGCQ00851656 port of SCGCQ00840239 )  
  - 9300-8i- SATA SSDs in Locked State Not Showing Up After Manually Loading Driver.(SCGCQ00859103 port of SCGCQ00843668 )  
  - PL: SATA hinting feature causes IO timeouts with Linux(SCGCQ00868405 port of SCGCQ00867345 )  
  - Gen-3 is not supporting SES Page 0x0A slot mapping mode fully(SCGCQ00872845 port of SCGCQ00855132 )  
  - System Hangs after Adapter reset with heavy IO load(SCGCQ00875779 port of SCGCQ00646625 )  
  - PL: Check in Intruder A1 serdes setting(SCGCQ00882320 port of SCGCQ00882269 )  
  - PL: Fix FPE state machine transition flaw which could cause long I/O latency(SCGCQ00885561 port of SCGCQ00884179 )  
  - PL: Fault 0xd071 while sending ABORT_TASK TM using UART CLI(SCGCQ00890279 port of SCGCQ00877710 )  
  - PL: SATA Non-Automated IO Timeouts(SCGCQ00891852 port of SCGCQ00881787 )  
  - PL: Cleanup discovery code for improved maintainability(SCGCQ00894149 port of SCGCQ00872750 )  
  - Fixed issue where 19th entry of Self-Test Results Log Page was not showing during SAT translation.(SCGCQ00894173 port of SCGCQ00847941 )  
  - PL: SR-IOV: Add code to work around IO Accelerator HW issue(SCGCQ00894174 port of SCGCQ00854562 )  
  - PL: Fault 0x4300 During Discovery Error Recovery Testing (Parent Defect(SCGCQ00894175 port of SCGCQ00860398 )  
  - BUSY TIMEOUT PERIOD Field is incorrectly populated in Control Mode Page for SATA Drive(SCGCQ00894176 port of SCGCQ00871463 )  
  - During SATA FORMAT Operation, REQUEST SENSE Command is Not Failed with Expected Response Where DESC bit is Set As 1.(SCGCQ00894177 port of SCGCQ00872727 )  
  - New pliControlRequest to clear FPE bit in FPE flags of mid state table(SCGCQ00894180 port of SCGCQ00817050 )  
  - Print Indices are Messed up(SCGCQ00895287 port of SCGCQ00892192 )  
  - PL: PL fault 0xD115 during internal testing(SCGCQ00907122 port of SCGCQ00860462 )  
  - Cutlass A1: 0x681E fault while doing Cable breaking on I/T Switching(SCGCQ00907376 port of SCGCQ00902077 )  
  - Cutlass A1: Add debug prints in SSP Frame received error handling in firmware(SCGCQ00907378 port of SCGCQ00907230 )  
  - PL: Fault 0x5833 When Performing Controller Reboots(SCGCQ00908647 port of SCGCQ00888103 )  
  - PL: EnclMgmt: Fix slot assignment to direct attach SEP Device Handle(SCGCQ00909943 port of SCGCQ00894230 )  
  - PL Fault 0x6002 When Sending SCSI Security Protocol Out Commands to SATA SSDs(SCGCQ00910189 port of SCGCQ00888033 )  
  - PL: SAS Device Page 0 Entry Device Present for missing expander after Discovery Complete(SCGCQ00910604 port of  SCGCQ00904470)  
  - PL: EEDPDataOffset value is 0 in the Reply Message frame, while IOCStatus refers to DIF/EEDP check failure.(SCGCQ00913149 port of SCGCQ00900221 )  
  - PL: Use Dual Contexts in Tx Context Manager Only When Expanders Are Present(SCGCQ00918136 port of SCGCQ00419356 )  
  - PL SATL: SCSI ATA Passthrough Code Should Check For Correct CDB Length(SCGCQ00926753 port of SCGCQ00915201 )  
  - PL: Consecutive Port numbering when all phys in static configuration results in drives not being removed from topology(SCGCQ00930631 port of SCGCQ00916882 )  
  - SES command locate not working for IBM enclosure when slot number information source bit set which uses the SES page 0x0A mapping.(SCGCQ00933996 port of SCGCQ00915737 )  
  - SSD Marked Failed After Encountering 03/1100 Sense (Medium Error(SCGCQ00949612 port of SCGCQ00933048 )  
  - Gemini PL firmware inorrectly selects the backplane slots to update the drive status.(SCGCQ00988412 port of SCGCQ00966714 )  
  - PL: 0x670A fault when running heavy MR I/O on JBOD + TM reset(SCGCQ01000516 port of SCGCQ00945848 )  
  - PL Fault 0x6001 while formatting drives that support Send/Receive FPDMA QUEUED commands(SCGCQ01004147 port of SCGCQ00936413 )  
  - PL: Fault 26B5 while running destructive domain test(SCGCQ01004871 port of SCGCQ00911520 )  
  - PL: 0x4300 fault when running Cable Breaker port break between expanders(SCGCQ01004881 port of SCGCQ00941569 )  
  - PL: Initiator/target moved can result in Initiator missing event but no corresponding Target missing event(SCGCQ01005020 port of SCGCQ00915308 )  
  - TM-Target Reset with Srst for sata drives does not have TM_NOT_SUPPORTED set(SCGCQ01020751 port of SCGCQ00188243 )  
  - SMR Host Aware and Host Managed drive support & ZBC to ZAC SATL(SCGCQ01025897 port of SCGCQ00900453 )  
  - PL: SATL Translation of SCSI Write Buffer Modes 5 and 7 Incorrectly Sets FWFlags_NonAuto bit in HW Context(SCGCQ01039154 port of SCGCQ00897934 )  
  - Rebuild/Locate (Amber  LED is not blinking at the rate expected rate.(SCGCQ01046432 port of SCGCQ01028986 )  
  - Activity LED with Invert Activity is not blinking corresponding to the IO operations(SCGCQ01046433 port of SCGCQ01028990 )  
  - PL: CONNECTOR_INFO structure misaligned and Failure to read IO Unit Page 7(SCGCQ01059529 port ofSCGCQ01055132  )  
  - PL: Fault 0xD073 during heavy IO(SCGCQ01059925 port of SCGCQ01052686 )  
  - To support non-contiguous slot numbers defined in Manufacturing page 7.(SCGCQ01061903 port of SCGCQ01000709 )  
  - SMR : Implement PARTIAL bit option for ReportZones command as part of ZBC-ZAC SATL(SCGCQ01070851 port of SCGCQ01020836 )  
  - PL's SATL fixes to SCSI Write Buffer modes 0xD, 0xE, and 0xF(SCGCQ01073648 port of SCGCQ01067662 )  
  - Non-zero check for LUN field in commands that SAM specifies to return ILLEGAL REQUEST(SCGCQ01080494 port of  SCGCQ01073728)  
  - To assign the enclosure level index for direct attached enclosures ie., the controller itself.(SCGCQ01084605 port of SCGCQ01057508 )  
  - SATA Only: Power On Reset Observed While Executing LOG SENSE Command to SATA Drive.(SCGCQ01085644 port of SCGCQ01081163 )  
  - PL: CPU hang due to out of bound access of Timer wheel RAM while manually adding FPE timer.(SCGCQ01090982 port of SCGCQ01089094 )  
  - PL Fault 0x584F (MID validation failure  when Timer Reached and Non Auto Frame interrupts are seen together.(SCGCQ01090985 port of SCGCQ01049209 )  
  - Return EEDP/DIF error data of the first error frame detected by the hardware during READ in the MPI Reply error message frame(SCGCQ01092128 port of SCGCQ01000193 )  
  - PL: Discovery due to non responding SATA drive is now timed to last for the amount of seconds configured in NVDATA(SCGCQ01092176 port of SCGCQ00996678 )  
  - PL: SMR Report Zone Command was not failed for last LBA only(SCGCQ01117871 port of SCGCQ01113946 )  
  - PL: System Halt with Certain Expander Backplanes(SCGCQ01123049 port of SCGCQ01116427 )  
  - PL: Customer expansion enclosures are seeing large number of drive timeout(SCGCQ01123282 port of SCGCQ01118894 )  
  - PL: 0x5813 and 0x5814 Faults after implementing a hardware workaround(SCGCQ01144861 port of SCGCQ01143329 )  
  - PL: Support for all the Internal connector types to end devices defined in the SES3 specification revision 13d and the proposed new connectors for SAS4(SCGCQ01167211 port of SCGCQ01085063 )  
  - PL:SCT Write Same support on native 4K drives(SCGCQ01168729 port of SCGCQ01163873 )  
  - PL: Green LED remains ON when direct attached drives are removed(SCGCQ01177453 port of SCGCQ01149961 )  
  - SATL Only: Write Same SCSI Command Fails With CC for SATA Drive(SCGCQ01180893 port of SCGCQ01173592 )  
  - Link rate reports as unknown for SAS3216/SAS3224 when PHY is disabled(SCGCQ01181861 port of SCGCQ01180830 )  
  - MR_6.12_SDS_Replan : FW disables FP for SED/FDE JBOD (epd passthrough .(SCGCQ01198915 port of SCGCQ01135893 )  
  - PL: Fault 0x6003 hits if blocked device has IOs pended before it gets blocked(SCGCQ01204822 port of SCGCQ01185613 )  
  - PL fault 5854 seen when system boots with all SATA drives in setup spun down(SCGCQ01204854 port of SCGCQ01155407 )  
  - Linux MR-Intruder-6.12-Replan-Beta:Performance drop of -20% SR, 8K-IO Size,QD(256  RAID-10 6G SATA-HDD x16DC(SCGCQ01205607 port of SCGCQ01171907 )  
  - Ventura PL: Add support to existing pli control request to do additional PL housekeeping for a stale MID(SCGCQ01209109 port of SCGCQ01204327 )  
  - SATA Only: WriteSame command aborts on 4K drive(SCGCQ01220119 port of SCGCQ01219893 )  
  - PL: Support slot numbers starting at an arbitrary number(SCGCQ01221523 port of SCGCQ01211733 )  
  - To fix 6.13 Fw coverity issues #15354, #15370 , #15442, #15745, #15755, #16014, #18206, #18327(SCGCQ01236424 port of SCGCQ01209604 )  
  - PL: Updates to temperature calibration(SCGCQ01243581 port of SCGCQ01241696 )  
  - Ventura: Firmware Hangs on Cold Boot of Slow Parts(SCGCQ01251642 port of SCGCQ01250734 )  
  - Locate operation to a drive in UEFI HII may fail to locate the drive(SCGCQ01255902 port of SCGCQ01255279 )  
  - SGPIO clock running at 100.7 KHz when set to 100Khz(SCGCQ01260750 port of SCGCQ01234457 )  
  - Firmware halts upon changing controller personality to JBOD mode with MCTP enabled(SCGCQ01260886 port of SCGCQ01252243 )  
  - PL Fault 0x5813 caused during SEND FSM TIMEOUT interrupt handling(SCGCQ01263723 port of SCGCQ01253195 )  
  - PL: SATA drive can't be detected after SPL-2 power compliant SAS drive is removed from same PHY(SCGCQ01269103 port of SCGCQ01264525 )  
  - PCIE discovery may complete early with no drives discovered before backplane detection is complete(SCGCQ01270117 port of SCGCQ01269316 )  
  - NVMe backplane detection and device discovery fails on OEM specific server NVMe backplane(SCGCQ01278820 port of SCGCQ01274101 )  
  - PL : Add Support for PUIS(Power Up In Standby  SATA drives(SCGCQ01280342 port of SCGCQ01174618 )  
  - Infinite loop on DISM when FW gets timeout for READ CAPACITY command (Porting to 6.x(SCGCQ01282807 port of SCGCQ01015624 )  
  - Ventura: Backplane detection logic may not initiate the second I2C write to Backplane device(SCGCQ01284634 port of SCGCQ01284607 )  
  - SBR reload is not working when update to new ROP which have new SBR and do warm reboot(SCGCQ01286949 port of SCGCQ01279081 )  
  - Support for 8GB DDr (SCGCQ01287322 port of SCGCQ01254692 )
  - bladeErrorIsrTask ChanNum 0 intStatus hit while enabling security in intruder(SCGCQ01287771 port of SCGCQ01077578 )  
  - MR 7.0.1: iMR FW hangs after rebuild is started on a hotspare drive that's been reclaimed(SCGCQ01293858 port of SCGCQ01286579 )  
  - Storclif returns failure with Description "Corrupted Image" when user tries to flash any other package(SCGCQ01293860 port of SCGCQ01292507 )  
  - Series of OCR seen during media recovery; System hangs during boot after AC cycle(SCGCQ01305737 port of SCGCQ01284753 )  
  - Ventura: Locate operation to a slot in a VPP backplane may not turn ON the LED(SCGCQ01312144 port of SCGCQ01308356 )  
  - LED does not turn OFF when PD is removed .(SCGCQ01314611 port of SCGCQ01003387 )  
  - PL:Customer specific drive enumeration(SCGCQ01315240 port of SCGCQ01198341 )  
  - MARS OEM branded iMR 9440-8i card randomly blinks Error/Fault LEDs on OEM backplane during VD Full initialization(SCGCQ01316648 port of SCGCQ01310542 )  
  - MR7.2_NVMe: FW Kill Adapter observed, after degrading R6 Dual Core Capable VD'(SCGCQ01316893 port of SCGCQ01306918 )  
  - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.(SCGCQ01317866 port of SCGCQ01256120 )  
  - MR_6.11_FW: Data corruption seen on IMR controller on JBOD with raw IO using smash tool- sles OS(SCGCQ01322090 port of SCGCQ00994097 )  
  - Cache Data lost if power loss happens during descriptor preparation.(SCGCQ01322093 port of SCGCQ01253076 )  
  - Data corruption on R6 WB VD when there are medium errors on one PD(SCGCQ01322143 port of SCGCQ01314319 )  
  - IMR_6.13: Drive is not marked as Foreign upon OCR when controller already has max configured PD's(SCGCQ01322224 port of SCGCQ01163849 )  
  - Design changes update on NVME drive hotswap feature and updating more changes(SCGCQ01327717 port of SCGCQ01319426 )  
  - RDM in Use-RDm Error & crashed into Montask during boot(SCGCQ01328766 port of SCGCQ01147739 )  
  - MR_6.11_FW: Data corruption seen on IMR controller on JBOD with raw IO using smash tool- sles OS(SCGCQ01328975 port of SCGCQ00994097 )  
  - Firmware hit PL Fault 0000d033 when pull out multiple drives (OEM backplane(SCGCQ01330783 port of SCGCQ01304715 )  
  -  Port_Not_Required  port of  ) MR 7.1_Double Dip COL causes loss of disk cache(SCGCQ01334524 port of SCGCQ01311127 ) 
  - pl: backend PCIe: specific vendor NVMe device does not appear to host software(SCGCQ01337626 port of SCGCQ01328743 )  
  - Port_Not_Required  port of  ) Revert C(SET (SCGCQ01318920(SCGCQ01339727 port of  SCGCQ01338907)  
  - Ventura: Detect invalid BP_TYPE types in VPP backplane Mgmt connector group(SCGCQ01342775 port of SCGCQ01332062 )  
  - (NVMe Only  Some SCSI IOs to NVME devices with IEEE SGL failed with invalid SGL IOC Status(SCGCQ01343513 port of SCGCQ01325987 )  
  - Cisco Validation: FW throws an exception while scheduling Consistency check on R1.(SCGCQ01344416 port of SCGCQ01339131 )  
  - Ventura MR - Linux 64 JBOD SAS HDDs 4K SW 64QD controller crashes(SCGCQ01344432 port of SCGCQ01342194 )  
  - Remove DRAID sources(SCGCQ01346356 port of SCGCQ01346339 )  
  - Insertion of Faulty drive results in FW failure.(SCGCQ01346491 port of SCGCQ01321192 )  
  - Event Log API does not account for instances when LD ID may be set to LD_INVALID(SCGCQ01347025 port of SCGCQ01330761 )  
  - unwanted print in the tty log(SCGCQ01349266 port of SCGCQ01291928 )  
  - MR7.1: Unexpected event for lun not ready Sense: 2/04/02(SCGCQ01349291 port of SCGCQ01304550 )  
  - 9440-8i - system hung during stress test in JBOD mode under Win10(SCGCQ01356675 port of SCGCQ01341346 )  
  - CSCve49430(CSC.nuova,new,chrevana C240-M5:When all 26 drives inserted , drives discovery failure is observed.(SCGCQ01357951 port of SCGCQ01349506 )  
  - Ventura: PL FW may fault x720E for invalid backplane type configuration(SCGCQ01357973 port of SCGCQ01351358 )  
  - Set the appropriate ( DM_IO_CTX_FLAG_INT_CFG_REQ   flag to indicate that mptfarme/mid is allocated for internal config request so that frame will be released inside DmPlConfigPage after the allocation purpose is served.(SCGCQ01358260 port of SCGCQ01355519 )  
  - Firmware should block to downgrade MR 7.2 NVMe profile to MR 7.1 SAS/SATA profile(SCGCQ01361593 port of SCGCQ01357859 )  
  - LSA hangs when user try to change drive security key.(SCGCQ01370420 port of  SCGCQ01342655)  
  - Security Key provided for importing Foreign Config is not taken by LSA 02.79(SCGCQ01373223 port of SCGCQ01332191 )  
  - SSU Commands to SPL-2 compliant drive times out(SCGCQ01376408 port of SCGCQ01358769 )  
  - PL: RETURNED LOGICAL BLOCK ADDRESS in READ CAPACITY (16  is unexpectedly zero(SCGCQ01377235 port of SCGCQ01366977 )  
  - Chassis slot valid bit is not set into Enclosure Page 0.(SCGCQ01380979 port of SCGCQ01323680 )  
  - Dev defect:- to enhance the fix for graceful handling of MfgId 0 ONFI issue(SCGCQ01383726 port of SCGCQ01365188 )  
  - Fix synchronization issues with ttyLogInFlash=1(SCGCQ01385058 port of SCGCQ01378083 )  
  - Ventura B0: 9400 IT Channel product firmware detecting memory read error during bootup(SCGCQ01385670 port of SCGCQ01375470 )  
  - Cascaded x32 Backplane causing 100+ second retry during system boot(SCGCQ01391350 port of SCGCQ01385039 )  
  - Repeated SATA SSD erase cause FW hung(SCGCQ01396972 port of SCGCQ01391886 )  
  - Post discovery, if a SAS drive which is set as JBOD is spun down with sg_utils and fdisk(8  is run on Linux, creates a hang like situation(SCGCQ01396974 port of SCGCQ01393187 )  
						
  - Unable to use secondary upgrade Key.(SCGCQ01396976 port of SCGCQ01384568 )  
  - MR 7.3 :PL Fault 0000d075 LR 01283991 , while running IO`s , CC and OCR in background.(SCGCQ01399528 port of SCGCQ01384714 )  
  - Fix synchronization issues with ttyLogInFlash=1(SCGCQ01403256 port of SCGCQ01378083 )  
  - Replacing RAID Controller with Degraded VD Hangs System(SCGCQ01403725 port of SCGCQ01393703 )  
  - pdRef filled incorrectly in bvd->Physical_Disk_Sequence[] causing DDF to skip added PD in Recon(SCGCQ01412186 port of SCGCQ01400343 )  
  - Parameter Page Reads fail during ONFI bringup.(SCGCQ01415127 port of SCGCQ01413557 )  
  - Active  port of  ) Prevent Improper Flash from I(S(SI (Supported (SBR/FW to nonport of  )I(S(SI (Supported (SBR/FW when Board has I(S(SI Chip(SCGCQ01420659 port of SCGCQ01410666 ) 
  - Firmware doesn’t support VPD, so PCI VPD support should not be advertised(SCGCQ01439825 port of SCGCQ01392173 )  
  - System will pop up “Cannot communicate with iButton to …” during reboot with Dania card (FW:50.2.1-0597(SCGCQ01450218 port of SCGCQ01447988 )  
  - PL: EnclMgmt: Move ownership of SES Page 0x0A slot mapping from devices to PHYs(SCGCQ01458622 port of SCGCQ00870423 )  
  - NVMe drive discovery fails after pull/push on customer specific NVMe supported backplane(SCGCQ01460735 port of SCGCQ01404209 )  
  - Ventura B0: NVME Drives Not Discovered on 16i Card(SCGCQ01461753 port of SCGCQ01381033 )  
  -(SCGCQ01462850 port of SCGCQ01459442 )  
  - Hot plugged NVMe drive fails to link up on OEM backplanes with ISTWI drive presence polling enabled(SCGCQ01464096 port of SCGCQ01463496 )  
  - MR7.4: LDs disappear when changing controller profile (from profile 10 back to profile 12 .(SCGCQ01465007 port of SCGCQ01413560 )  
  - Fixed the issue with older ibutton(SCGCQ01466737 port of SCGCQ01455738 )  
  - Purley Server: CATERR reported on front panel LCD and SUT hang at the windows logo page(SCGCQ01481033 port of SCGCQ01410221 )  
  - MR RAID-mode profile 10 create vd cause pds for that vd offline(SCGCQ01481312 port of SCGCQ01450092 )  
  - BT1680: Constant ORR during test with SATA enclosure(SCGCQ00136973 port of SCGCQ00134862 )  
  - Devices are not present after returning from hibernation(SCGCQ00137695 port of SCGCQ00136646 )  
  - Duplicate MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE with MPI2_EVENT_SAS_INIT_RC_ADDEDC_ADDED(SCGCQ00140409 port of SCGCQ00138171 )  
  - SEP transfers may fail on certain DA-SEP backplanes.(SCGCQ00143810 port of SCGCQ00143533 )  
  - SATA: read 16 with LBA greater than 48-bits returns success(SCGCQ00146091 port of SCGCQ00141435 )  
  - Reset loop after induced TM during IO(SCGCQ00148774 port of SCGCQ00145842 )  
  - Converting SATA Standby count to proper Standby condition timer value in Power condition mode page (page 0x1a  for mode sense command.(SCGCQ00148775 port of SCGCQ00145610 )  
  - plGetLBA(  should be inlined(SCGCQ00149235 port of SCGCQ00147434 )  
  - Add more info to pl status debug command(SCGCQ00152663 port of SCGCQ00147744 )  
  - Prevent false 0x6003 Faults(SCGCQ00153307 port of SCGCQ00146948 )  
  - LSI2008 SATA NCQ enablement(SCGCQ00153474 port of SCGCQ00142855 )  
  - Multiple Phy Counter Events being triggered for same Phy Counter(SCGCQ00153481 port of SCGCQ00149277 )  
  - Send Execute Device Diagnostic ATA command during SATA Initialization(SCGCQ00155108 port of SCGCQ00148227 )  
  - Initiator device removal request fails when no I/Os are outstanding(SCGCQ00155217 port of SCGCQ00144168 )  
  - bld: Change PL makefile to build one object at a time(SCGCQ00155428 port of SCGCQ00151669 )  
  - Initiator removal handling(SCGCQ00155465 port of SCGCQ00148025 )  
  - Unwarranted SAS TOPOLOGY CHANGE LIST EVENT with PhyStatus change indication(SCGCQ00156018 port of SCGCQ00150956 )  
  - Eliminate PL Config Page restrictions(SCGCQ00157819 port of SCGCQ00143162 )  
  - Firmware might fault with code 0x4300 during SATA device initialization(SCGCQ00160151 port of SCGCQ00155693 )  
  - SATL: Wrong tag reported when unable to determine tag(SCGCQ00160153 port of SCGCQ00153117 )  
  - DMA sense data with FW instead of HW to prevent a hang of the DMA transfer.(SCGCQ00160363 port of SCGCQ00155280 )  
  - Constant ORR after injecting a wrong-direction data frame(SCGCQ00160502 port of SCGCQ00149684 )  
  - Fault 6051 or Long TM response times for Target Resets(SCGCQ00160985 port of SCGCQ00158317 )  
  - The SEP on a specific enclosure is not being seen.(SCGCQ00162958 port of SCGCQ00153605 )  
  - 0x0614 fault when aborting SATA passthrough messages(SCGCQ00163555 port of SCGCQ00152992 )  
  - Tuning needed for SATA power management(SCGCQ00164715 port of SCGCQ00153107 )  
  - Detection of a PMC SATA Mux, and enablement of NCQ(SCGCQ00168598 port of SCGCQ00144305 )  
  - PM: Need to disable SAS link power mgmt due to outstanding HW issues(SCGCQ00169036 port of SCGCQ00157653 )  
  - Add debug prints for TM completion when TM is aborted by another TM(SCGCQ00170860 port of SCGCQ00142862 )  
  - Fault 5900 during Task Management with SATA drives.(SCGCQ00188487 port of SCGCQ00185016 )  
  - Event notification for NOTIFY(Enable Spinup(SCGCQ00188779 port of SCGCQ00161993 )  
  - Reception of Initiator Added event before host removed device from a previous Initiator Not Responding event(SCGCQ00189547 port of SCGCQ00179026 )  
  - Translated Format Unit error handling(SCGCQ00192672 port of  SCGCQ00180307)  
  - PL: SAS Topology Change List Event may return incorrect NumPhys data(SCGCQ00193236 port of SCGCQ00151741 )  
  - Good Status reported on write command (mid execution  terminated with Task Set Full during data transfer(SCGCQ00198309 port of SCGCQ00193386 )  
  - Fault 7C35 seen during READ DMA passthrough commands to SATA Drive(SCGCQ00201418 port of SCGCQ00188546 )  
  - (SRIOV-Only PL  Add new pli interface to create ADD or REMOVE events(SCGCQ00201464 port of SCGCQ00176747 )  
  - (SRIOV-Only PL  Modify PL handling of DevHandle-addressed pages(SCGCQ00203026 port of SCGCQ00176746 )  
  - ATAPI: Additional cleanup during task management(SCGCQ00203751 port of SCGCQ00191984 )  
  - PL: Update some internal structures for device discovery(SCGCQ00209572 port of SCGCQ00202359 )  
  - PL: Slot number in Device Page 0 may be incorrect(SCGCQ00218355 port of SCGCQ00193383 )  
  - PL: SMP Discover List requests may time out(SCGCQ00221727 port of SCGCQ00209329 )  
  - Alternate slot addressing fails with Discover response length 0x1C(SCGCQ00226950 port of SCGCQ00207622 )  
  - Invalid SATA frame received during SATA spinup will result in PL Fault(SCGCQ00237418 port of SCGCQ00205898 )  
  - The SATL's inquiry VPD page 0 doesn't show support for block limits and logical block provisioning pages.(SCGCQ00237489 port of SCGCQ00226980 )  
  - Port link status GPIO LED (Green, Yellow  support for individual controller PHY's(SCGCQ00249384 port of SCGCQ00222856 )  
  - Add support to disable automatically doing spin-up in NVData(SCGCQ00249385 port of SCGCQ00201709 )  
  - pl: SATA non read/write command may be delayed under low resource condition(SCGCQ00250273 port of SCGCQ00219989 )  
  - Add LogInfo data for SMP Passthrough Request(SCGCQ00254440 port of SCGCQ00201947 )  
  - 5881 fault occurs on certain errors after issuing debug command(SCGCQ00254459 port of SCGCQ00228952 )  
  - Custom HARD RESET behavior in Target Mode firmware(SCGCQ00255664 port of SCGCQ00198846 )  
  - On simulated Cable pulls, an expander goes missing but no add event is seen when the cables are replugged(SCGCQ00260441 port of SCGCQ00242899 )  
  - SATL: Configurable Write Same execution behavior(SCGCQ00260442 port of SCGCQ00245759 )  
  - Tbolt: Port width modulation changes(SCGCQ00261551 port of SCGCQ00165936 )  
  - SATL:Read capacity 16 lowest aligned high byte calculation is incorrect(SCGCQ00279895 port of SCGCQ00254497 )  
  - pl: Improve handling of SATA Device Fault errors during initialization(SCGCQ00281558 port of SCGCQ00232070 )  
  - SAS Phy error counters are not getting incremented on removing direct attached expander(SCGCQ00315209 port of SCGCQ00231068 )  
  - SAS2 IT - Phase 14 – When SATA Drive is Moved to Standby State via Mode Page(0x1a , ASC/ASCQ is Incorrect for REQUEST SENSE(SCGCQ00317906 port of SCGCQ00286160 )  
  - (Sata Only  Request Sense Command is showing incorrect data during stopped condition(SCGCQ00318905 port of SCGCQ00283334 )  
  - Open Timeout Error Handling is too drastic(SCGCQ00319955 port of SCGCQ00089824 )  
  - Unexpected link reset on Write Current of SAS IO Unit Page 1(SCGCQ00320037 port of SCGCQ00248535 )  
  - SAS2308 doesn't support DPO or FUA(SCGCQ00320040 port of SCGCQ00254531 )  
  - Dev handle reuse not prepoerly handled(SCGCQ00320063 port of SCGCQ00298766 )  
  - SAS2 IT - Phase 14 – Allocation Length for SCSI READ CAPACITY(16  Command is not Handled Properly(SCGCQ00320749 port of SCGCQ00286226 )  
  - Request Sense Command is showing incorrect data during Send Diagnostic foreground mode Command is issued.(SCGCQ00321663 port of SCGCQ00283700 )  
  - SAS2 IT : Phase 14 : Cannot abort a background short Self test(SCGCQ00323826 port of SCGCQ00285460 )  
  - 0x6051 Fault happens while doing cable pulls on expanders(SCGCQ00405927 port of SCGCQ00255115 )  
  - PL: Revert COMWAKE negation time to default value(SCGCQ00408859 port of SCGCQ00317288 )  
  - Invader B0: Add FLUSH_WRITEs to FPE timer handlers(SCGCQ00408890 port of SCGCQ00348342 )  
  - Debug Flags issue with non-IO path portion of the PL build(SCGCQ00414439 port of SCGCQ00327165 )  
  - Invader B0 configures externally configurable route table with invalid table-table route entries.(SCGCQ00418573 port of SCGCQ00340055 )  
  - SAS2 IT Ph 15: Incorrect Sense data is populated when Security Protocol IN/OUT command is sent to supported Drive(SCGCQ00433282 port of SCGCQ00334093 )  
  - SAS2 IT - Phase 15 – REQUEST SENSE's ASCQ is Incorrect When SATA Drive State Tranistion Happens (ie  Active->Standby->Stopped(SCGCQ00436152 port of SCGCQ00327531 )  
  - SAS link does not reverting to 6G when Tx Training failed and causes the link not to come up(SCGCQ00436190 port of SCGCQ00352330)  
  - Invader B0: 0x6003 fault during long term large IO test(SCGCQ00437119 port of SCGCQ00355980 )  
  - Invader: Fixed Problem with MoveTo/FromSasDCR(  Functions Being Incorrectly Called from PL(SCGCQ00445287 port of SCGCQ00362895 )  
  - PL: READ LONG and WRITE VERIFY commands to a SATA drive fail.(SCGCQ00459493 port of SCGCQ00374557 )  
  - Invader: Fixed SATA/Discovery Issue Where Discovery Retries are Exhausted and Cleanup is Not Performed(SCGCQ00460205 port of SCGCQ00358449 )  
  - 265D fault handling IO while SATA drive is not ready if SATA init fails(SCGCQ00461053 port of SCGCQ00344626 )  
  - pl: SATL: Improper Inquiry data for nonzero LUNs when a Format Unit is in progress(SCGCQ00461986 port of SCGCQ00333233 )  
  - (Sata Only  Fault (0x1901  Observed When VPD Inquiry is Executed When SATA Drive is Under Diagnostic Operations(SCGCQ00462588 port of SCGCQ00343690 )  
  - Add TM tracker to Mid tracker(SCGCQ00463061 port of SCGCQ00363000 )  
  - Target mode abort all IOs except Task IUs(SCGCQ00463241 port of SCGCQ00337985 )  
  - Invader C0: SGE flags incorrectly set during Rx DMA passthrough(SCGCQ00464630 port of SCGCQ00378949 )  
  - Invader: Added Debug Table to UART to Show Outstanding Task Management MIDs(SCGCQ00464637 port of SCGCQ00364238 )  
  - IR: Prevent IO to a phys disk while TM is in progress(SCGCQ00466020 port of SCGCQ00187983 )  
  - PL: Event Replay device reordering(SCGCQ00469721 port of SCGCQ00313918 )  
  - SAS2 IT - Phase 15 – Extra Bytes of Data Provided for REPORT LUNS SCSI Command with Allocation Length=0x10(SCGCQ00470268 port of SCGCQ00338263 )  
  - SAS2 IT - Phase 15 – Power Condition Mode Page Shows SATA Drive Standby Timer is Enabled At Start of Day(SCGCQ00470272 port of SCGCQ00335285 )  
  - Write same to SATA drive with UNMAP=1 and Number Of Logical Blocks = 0 fails(SCGCQ00470275 port of SCGCQ00343026 )  
  - Fixed Issue Involving 0x6004 Fault Caused by Incorrect Double Incr/Decrement of IO Count(SCGCQ00470944 port of SCGCQ00378928 )  
  - Invader B0: Update TBM Init and fix recursive D20E fault(SCGCQ00471576 port of  SCGCQ00367917)  
  - Fury B0: Fault D20C followed by a recursive D20E(SCGCQ00471578 port of SCGCQ00325990 )  
  - Invader C0: Use a reserved PL print during TBM initialization(SCGCQ00472138 port of SCGCQ00383616 )  
  - Added faults in the cable management code(SCGCQ00473937 port of SCGCQ00365524 )  
  - C0: Fix SAS Phy SerDes settings(SCGCQ00475433 port of SCGCQ00377552 )  
  - Invader: Update Workaround Descriptions to Include C0 on Affected or Fixed Line as Appropriate(SCGCQ00475792 port of SCGCQ00361713 )  
  - Enable cable management feature(SCGCQ00476590 port of SCGCQ00372021 )  
  - Serdes temperature sensitivity may cause phy errors(SCGCQ00476793 port of SCGCQ00384936 )  
  - Firmware faults with 0x2622 due to a parity error in pad (unused  data(SCGCQ00477177 port of SCGCQ00332124 )  
  - Invader C0: (PL  Incorrect workaround name in workaround implementation(SCGCQ00477179 port of SCGCQ00377271 )  
  - Update Serdes settings so the Transmitter Training takes shorter amount of time(SCGCQ00480609 port of SCGCQ00360460 )  
  - PL: SATL - Fix handling of Immediate bit.(SCGCQ00495886 port of SCGCQ00440204 )  
  - SATL: Unmap limits artifically limited to prevent OS timeouts(SCGCQ00498353 port of SCGCQ00382076 )  
  - PL: SCSI Mode Sense to ATA fails for Power Condition mode page.(SCGCQ00498889 port of SCGCQ00423683 )  
  - PL: Check iopiMemoryMove(  Return Status - SATL Read Capacity, Report LUNs, Security Protocol Commands(SCGCQ00500694 port of SCGCQ00422209 )  
  - Removed Unused Code in Device Manager(SCGCQ00501211 port of SCGCQ00401450 )  
  - PL: Check iopiMemoryMove(  Return Status - SATL Request Sense, Format, Mode Sense Commands(SCGCQ00501297 port of SCGCQ00425006 )  
  - Fixed Bugs in Parameter Data for SATL Translation of Security Protocol In Command(SCGCQ00503693 port of SCGCQ00447871 )  
  - PL: Certain PhyGroup configurations result in fault 0x7600(SCGCQ00528434 port of SCGCQ00404234 )  
  - Move all the one-second calls in the pl timer to a different function(SCGCQ00530329 port of SCGCQ00391042 )  
  - PL: modify PL_PRINTs in discovery code(SCGCQ00531113 port of SCGCQ00393414 )  
  - Fixed Minor Issue in UART Diagnostic Code Which Could Cause Data Exception(SCGCQ00531120 port of SCGCQ00407170 )  
  - Invader C0: Minor Target mode optimzations(SCGCQ00551042 port of SCGCQ00411657 )  
  - Invader C0: Power Management does not fill in TxRxSleepStatus field in SAS IO Unit Page 8(SCGCQ00555919 port of SCGCQ00406316 )  
  - PL: Use Dual Contexts in Tx Context Manager Only When Expanders Are Present(SCGCQ00556336 port of SCGCQ00419356 )  
  - IO aborts after a controller reboot from the surviving controller(SCGCQ00556337 port of SCGCQ00439506 )  
  - PL: Update RxLosvref value per SE(SCGCQ00559398 port of SCGCQ00415144 )  
  - make internal temperature sensor data available at start-of-day(SCGCQ00559404 port of SCGCQ00419450 )  
  - PL: Serdes temperature sensitivity workaround needs to be enabled for B0 chip as well(SCGCQ00565459 port of SCGCQ00417770  )  
  - cli command pl fpe mstap cannot be called(SCGCQ00566131 port of SCGCQ00457406 )  
  - Invader: pl fpe mgrdsfff does not allow EnableVFCheck to be set(SCGCQ00566132 port of SCGCQ00457408 )  
  - (PL  Implement workaround for BugTrack [SAS3Core]1101(SCGCQ00566154 port of SCGCQ00468537 )  
  - Invader C0: Fault 0x5854 During Jammer Error Injections(SCGCQ00566159 port of SCGCQ00472744 )  
  - Fixed Problem With SATL Translation of SCSI Unmap to SATA TRIM Command(SCGCQ00566184 port of SCGCQ00503015 )  
  - PL: Discovery fails to discover devices added during discovery(SCGCQ00566199 port of SCGCQ00556144 )  
  - PL: Update Host Based Discovery to include DataBolt settings(SCGCQ00566213 port of SCGCQ00414622 )  
  - Check iopiMemoryMove(  Return Status - Atapi SCSI IO, Handle IO During Format or Self Test(SCGCQ00566246 port of SCGCQ00477803 )  
  - Check iopiMemoryMove(  Return Status - Target Abort Command Buffers(SCGCQ00566250 port of SCGCQ00477834 )  
  - PL: Flush Writes and MemorySyncs in DMA Trans Queue and Rx Transport Hardware Cleanup to Ensure Robustness(SCGCQ00566269 port of SCGCQ00521686 )  
  - Create SAT3 Disabled Compile Option(SCGCQ00568403 port of SCGCQ00419844 )  
  - mpi_temp.h cleanup(SCGCQ00568424 port of SCGCQ00503059 )  
  - Incorrect Additional Sense data for PERSISTENT RESERVE OUT, when executed on Direct attach SATA drive(SCGCQ00568485 port of SCGCQ00454354 )  
  - Configurable SES Page Buffer Size(SCGCQ00568488 port of SCGCQ00342945 )  
  - Linux Driver mpt2sas failure observed during module load(SCGCQ00568493 port of SCGCQ00427369 )  
  - Security Protocol In with Security Protocol 0xEF does not retrieve the proper data(SCGCQ00568494 port of SCGCQ00443913 )  
  - PL: Internal structures associated with missing Initiator devices may not be removed(SCGCQ00568495 port of SCGCQ00446007 )  
  - SAS2 IT - Phase 17 – WRITE LONG(16  SCSI Command is Not Failed with Expected SCSI Response for Incorrect SERVICE ACTION field(SCGCQ00568499 port of SCGCQ00451090 )  
  - SCSIStatusQualifier is added to SCSI IO Error Reply(SCGCQ00568504 port of SCGCQ00397520 )  
  - Out of resource conditions may lead to discovery non completion(SCGCQ00568508 port of SCGCQ00435398 )  
  - PL: Phy Reordering will send a SAS Topology Change List Event with wrong ExpStatus(SCGCQ00568509 port of SCGCQ00551173 )  
  - Fury no longer links up to Maxim expander with phase 2 FW(SCGCQ00596630 port of SCGCQ00525026 )  
  - Whirlwind: Further IO path tweaks.(SCGCQ00609803 port of SCGCQ00583839 )  
  - PL: Target mode IO sends reply using wrong Hashed SAS Address(SCGCQ00712246 port of SCGCQ00703302 )  
  - 0x6004 fault on during controller reset test(SCGCQ00725165 port of SCGCQ00680866 )  
  - PL: Identify SSD needs to pend SATA Init when running(SCGCQ00725167 port of SCGCQ00702708 )  
  - Pli Control Request for IOP to Bypass FP disable on Selected Device Handle in Target Mode Based PL upon receipt of for non good response frame(SCGCQ00725182 port of SCGCQ00568651 )  
  - Remove event replay macro from mpi_temp.h file(SCGCQ00725196 port of SCGCQ00574398 )  
  - Fixed Problems with Power Condition VPD Page (0x8A  for Inquiry Command(SCGCQ00725233 port of SCGCQ00573940 )  
  - SAS Phy page 1 and 2 error counters don't perform properly(SCGCQ00725239 port of SCGCQ00588750 )  
  - Security freeze command fails with Check condition hardware error(SCGCQ00725241 port of SCGCQ00589464 )  
  - SATL: Incorrect Sense Info Obtained For a Request Sense Command During Read IO's(SCGCQ00725253 port of SCGCQ00604201 )  
  - PL: Add ConnectorName and EnclosureLevel fields to SAS Device Page 0(SCGCQ00725269 port of SCGCQ00464436 )  
  - Add ability to control ContinueAWT(SCGCQ00725279 port of SCGCQ00530872 )  
  - PL: Update Starfish register definition(SCGCQ00725305 port of SCGCQ00665118 )  
  - SATL: Indicate support for the ATA Device Server Password security protocol(SCGCQ00725310 port of SCGCQ00465302 )  
						
  - Print SES page data length and PL SES Diag page buffer size to ring buffer(SCGCQ00725311 port of SCGCQ00557625 )  
  - SATL is not returning ATA staus return descriptor correctly after processing ATA passthrough command(SCGCQ00725314 port of SCGCQ00659825 )  
  - PL: SCSI Read Command of Zero Transfer Length to SATA Returns Data(SCGCQ00725332 port of SCGCQ00672407 )  
  - SCSI Command is Not Failed with Expected Response When Reserved Fields Set as Non-Zero Value for SATA Disk Under Format(SCGCQ00725333 port of SCGCQ00679566 )  
  - PL: Firmware is not clearing RxDmaEng host parity interrupt(SCGCQ00725335 port of SCGCQ00680506 )  
  - After Controller Reset, Sense Data of REQUEST SENSE SCSI Command data is incorrect when SATA Drive is in Stand By Mode(SCGCQ00725341 port of SCGCQ00605087 )  
  - Allocation Length for REPORT LUNS SCSI Command is not Handled Properly for SATA Drive(SCGCQ00725367 port of SCGCQ00659829 )  
  - PL: Fix a few issues found by code analysis tool(SCGCQ00781307 port of SCGCQ00729588 )  
  - PL: Use an interrupt mask instead of multiple interrupts(SCGCQ00781308 port of SCGCQ00730675 )  
  - PL: SR-IOV IOs can trigger fault 0x2667 when FastPath is disabled to a drive in firmware(SCGCQ00781309 port of SCGCQ00676043 )  
  - SATA Init Problem Causing 0x6230 Controller Fault(SCGCQ00781311 port of SCGCQ00683795 )  
  - With VALID bit set INFORMATION field in Sense data is not populated for WRITE SAME(16  command(SCGCQ00781312 port of SCGCQ00684852 )  
  - WRITE SAME(10  command with UNMAP bit set in CDB doesnt behave as expected(SCGCQ00781313 port of SCGCQ00685000 )  
  - With VALID bit set INFORMATION field in Sense data is not populated for WRITE LONG(16  SCSI Command(SCGCQ00781322 port of SCGCQ00705308 )  
  - READ CAPACITY(10  SCSI command to a SATA drive returns unexpected data(SCGCQ00781331 port of SCGCQ00707233 )  
  - PL Fault 0x6003 While Running Heavy IO and Injecting Expander Resets on Alternating SAS Domains(SCGCQ00781345 port of SCGCQ00715211 )  
  - Fix Task Management coding error(SCGCQ00781364 port of SCGCQ00729603 )  
  - PL: Diagnostic CLI task management code has unreachable code(SCGCQ00781372 port of SCGCQ00731572 )  
  - PL: Remove legacy phy interrupts that don't exist anymore.(SCGCQ00793923 port of SCGCQ00735006 )  
  - PL: Enclosure management code doesn't check return value(SCGCQ00793928 port of SCGCQ00749722 )  
  - PL: SAS Device Page 0 read of valid devices returns error incorrectly(SCGCQ00793936 port of SCGCQ00764920 )  
  - PL: In Topology Change Event PhyStatus is not reported as Target Device missing(0x2  upon HDD removal(SCGCQ00816417 port of SCGCQ00777858 )  
  - PL: Enclosure Management SES Diag Page 2 does not check for Generation Code changes(SCGCQ00816419 port of SCGCQ00769393 )  
  - PL: TUR to a SATA command may not return correct ASC/ASCQ(SCGCQ00816421 port of SCGCQ00785787 )  
  - Fix compilation options(SCGCQ00816426 port of SCGCQ00788656 )  
  - Tiger WW: Make changes to support SED attached expanders(SCGCQ00837784 port of  SCGCQ00800429)  
  - Fixed the false return of "FRAME_ALLOCATE_FAILED" in PL(SCGCQ00848152 port of SCGCQ00836391 )  
  - (PL  0x5805 Fault during IO + Task Management test(SCGCQ00860390 port of SCGCQ00433677 )  
  - Unknown PL log information is observed by Host driver while testing SAS link down/up by disabling SAS phy of Controller(SCGCQ00894190 port of SCGCQ00868730 )  
  - PL: SAS Wide Max Queue depth not error checking correctly(SCGCQ00900645 port of SCGCQ00898573 )  
  - PL: SATL Translation of SCSI Write Buffer Modes 5 and 7 Incorrectly Sets FWFlags_NonAuto bit in HW Context(SCGCQ00917170 port of SCGCQ00897934 )  
  - Port Status Yellow LED GPIO not working(SCGCQ00917802 port of SCGCQ00907921 )  
  - PL: Manufacturing Page 30 DeQueueModes Setting in NVDATA is not Honored by Firmware(SCGCQ01004885 port ofSCGCQ00915975  )  
  - PL: Add extra prints to track when RxCtxMgr fails to stop(SCGCQ01004891 port of SCGCQ00949949 )  
  - PL: Initiator/Target moved can generate two Target Add Events(SCGCQ01005021 port of SCGCQ00934337 )  
  - PL: I/O timeout while running both auto and non-auto I/Os.(SCGCQ01025036 port of SCGCQ01022368 )  
  - FIS port handling of TRIM command with data length spanning multiple unmap descriptors(SCGCQ01073664 port of SCGCQ01051184 )  
  - SATA Only: Unsupported Log Sense commands fail with incorrect additional sense(SCGCQ01082896 port of SCGCQ01079905 )  
  - PL: Enhance PLI_CTRL_REQ_GET_SATA_HINT_INFO to also provide information of an active SATA Hinting discovery at a given time(SCGCQ01092177 port of SCGCQ01052367 )  
  - Unable to un-register a device because of outstanding Task Set Full MID(SCGCQ01109232 port of SCGCQ01076294 )  
  - SATA only: SANITIZE Command is Not Failed With Expected Sense Data for Service Action EXIT FAILURE MODE(SCGCQ01118557 port of SCGCQ01115136 )  
  - PL: 0x26B5 fault while running destructive domain test(SCGCQ01127836 port of SCGCQ01113264 )  
  - PL: Config page write current to Manufacturing Page 5 prior to Port Enable causes 0x4f01 fault(SCGCQ01150499 port of SCGCQ01149677 )  
  - PL: Fault 00005814 During IO + Cable Pull/Push(SCGCQ01177796 port of SCGCQ01168280 )  
  - ECC Error spike observed during Cache Restore when read eye training failed.(SCGCQ01198956 port of SCGCQ01124194 )  
  - PL SATA Only: outstanding SATA passthorugh IO can cause target reset from timer callback check if sata Initialization not done yet(SCGCQ01208721 port of SCGCQ01172334 )  
  - Fix coverity issues #15381(SCGCQ01236450 port of SCGCQ01211556 )  
  - SATA only : On EPC feature supported SATA drives, timers are still disabled even after setting the timers using Mode Select command(SCGCQ01276457 port of SCGCQ01263497 )  
  - IOP FW might observe I2C bus fault due to PL FW releasing I2C bus with active transaction.(SCGCQ01282482 port of SCGCQ01278309 )  
  - Ventura: Global IO activity LED may always stay ON in a NVMe VPP backplane server(SCGCQ01287732 port of SCGCQ01284596 )  
  - Adjust data structures for 8GB offload and restore operations(SCGCQ01288615 port of SCGCQ01279638 )  
  - (SATA Only  Fault 4203 while running SCSI unmap and TM to a SATA drive.(SCGCQ01294459 port of SCGCQ01287926 )  
  - Disable PUIS(Power up in standby  feature support(SCGCQ01305332 port of SCGCQ01304887 )  
  - Implemented handling for firmware upgrade/downgrade incompatible firmware and profile(SCGCQ01308534 port of SCGCQ01276905 )  
  - MR 7.2_Beta_NVMe Polaris LED is staying on(SCGCQ01317865 port of SCGCQ01312938 )  
  - Support for 128 drive enclosure(SCGCQ01318495 port of SCGCQ00920037 )  
  - RDM in Use-RDm Error & crashed into Montask during boot(SCGCQ01322145 port of  SCGCQ01147739)  
  - Port_Not_Required  port of  ) Chassis slot valid bit is not set into Enclosure Page 0 (SCGCQ01326055 port of SCGCQ01323680 ) 
  - Controller hang with FDE Drive (Micron 510DC(SCGCQ01326925 port of  SCGCQ01304133)  
  - PD Lost observed, after system graceful reboot or Controller OCR(SCGCQ01327295 port of SCGCQ01314168 )  
  - Data loss during cache offload power cycle test(SCGCQ01329142 port of  SCGCQ01286491)  
  - H840 montask while running AC cycle test during the 'cache offload testing'. Controller break into montask with Error Data Abort exeption.(SCGCQ01330207 port of SCGCQ01320912 )  
  - FW entered Exception mon_task while importing foreign PDs in loop.(SCGCQ01331535 port of SCGCQ01330764 )  
  - To close the window during which ONFI is not armed even when the data is dirty(SCGCQ01335210 port of SCGCQ01332552 )  
  - Marlin B0: backend PCIe: EC6D fault on link glitch(SCGCQ01337660 port of SCGCQ01336021 )  
  - Montask after data abort exception handler was called(SCGCQ01339605 port of SCGCQ01335905 )  
  - PA1: fw hit PL D10D while format partition(SCGCQ01346495 port of SCGCQ01333872 )  
  - Storcli response delayed up to 30sec when IO and CC running on LB+(SCGCQ01346753 port of SCGCQ01334602 )  
  - Active  port of  ) Incorrect TFM VPD data (SCGCQ01350076 port of SCGCQ01337835 )
  - controller wil not boot up after downloading the corrupted images ( app.rom, SBR, BTBL .. etc  because of CRC mismatch.(SCGCQ01370414 port of SCGCQ01330952 )  
  - Ventura: Slot LED status update operation may fail on 8i based HBAs(SCGCQ01373072 port of SCGCQ01372983 )  
  - Initiate Ocr after FW raises assert(SCGCQ01376506 port of SCGCQ01375574 )  
  - MR 7.2 NVMe : iMR Reconstruction is very slow(SCGCQ01382897 port of SCGCQ01330296 )  
  - If an INVALID applicationMsgTag id received, then failed the command with MFI_OOB_STATUS_INVALID_CMD using command id MAX_OOB_COMMANDS.(SCGCQ01383869 port of SCGCQ01337332 )  
  - pl: backend PCIe: EC79 fault(SCGCQ01389704 port of SCGCQ01367013 )  
  - Cisco - CSCvf25360 - STorCLI firmware log retrieval returns junk characters(SCGCQ01403301 port of SCGCQ01395855 )  
  - Interrupting Offload will Lead to Next offload cycle to fail(SCGCQ01404399 port of SCGCQ01399701 )  
  - Exception Handler Return address 0x01362c7d when boot up(SCGCQ01405520 port of SCGCQ01404373 )  
  - Enclosure redundant path show as not present and extra entry of enclosure is seen(SCGCQ01407464 port of SCGCQ01289603 )  
  - MR 7.4 - Hitting DC after OCR on 240 EPDs(SCGCQ01439279 port of SCGCQ01412665 )  
  - 9460-16i disappears from F1 setup after encrypting SED(SCGCQ01450194 port of SCGCQ01326871 )  
  - MR 7.4 - Hitting DC after OCR on 240 EPDs(SCGCQ01454603 port of SCGCQ01412665 )  
  - Ventura: FW may fault with 265D when attached to OEM NVMe backplane(SCGCQ01461873 port of  SCGCQ01385700)  
  - (VSES  SES INQUIRY commands and storcli commands hang while getting adapter information(SCGCQ01463865 port of SCGCQ01458388 )  
  - Flashed based 256 byte VPD programming support(SCGCQ01474040 port of SCGCQ01330751 )  
  - Ventura B0: Fault 0x510B while doing reboot test along with IOs & TMs(SCGCQ01487266 port of SCGCQ01440764 )  
  - [17B] Bugzila 120384 - [MFG] Purley Cosmo Raid card 530-8i loss during MQT1&2 Test(SCGCQ01511223 port of SCGCQ01504243 )  
  - Relaxed ordering Enhancement(SCGCQ00136149 port of  SCGCQ00131448)  
  - Data Errors seen with PL_LOGINFO_CODE_BT1680 on a SAS drive(SCGCQ00137250 port of SCGCQ00136641 )  
  - Pass Man page 8 SEP DevIndex in SAS Devicepage0 Slot field(SCGCQ00138852 port of SCGCQ00136626 )  
  - PL: PhyStatus Reason Code 0x2 not returned for a removed device(SCGCQ00140407 port of SCGCQ00137491 )  
  - Expander goes missing during Expander phy reset testing(SCGCQ00149146 port of SCGCQ00146846 )  
  - Obtaining proper value of Standby condition timer from Power condition mode page (page 0x1a  for a mode select command.(SCGCQ00150912 port of SCGCQ00144748 )  
  - Allow Config Write Current of SAS IO Unit Page 1 after PortEnable(SCGCQ00154828 port of SCGCQ00142923 )  
  - pl: SATL: Better handling of invalid signature FIS(SCGCQ00154930 port of SCGCQ00148569 )  
  - pl: SATL: need improvement to invalid initial FIS detection - continuation of SCGCQ00148569(SCGCQ00154931 port of SCGCQ00152050 )  
  - Convert MultiPathEnabled bit in PL_INFO_FLAGS to a reserved bit.(SCGCQ00155113 port of SCGCQ00151410 )  
  - PL: Discovery Error MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN(SCGCQ00162081 port of SCGCQ00151755 )  
  - (PL-Only  Debug text strings are out of sync with the order of data(SCGCQ00162962 port of SCGCQ00152549 )  
  - [DISABLED]SAS pwr mgmt: If wakeup fails, next PM transition will hang(SCGCQ00168963 port of SCGCQ00153629 )  
  - Reserved value in DATAPRES field should cause response to be discarded(SCGCQ00169478 port of SCGCQ00164392 )  
  - Virtualization: Fault 7D70 with port virtualization enabled firmware.(SCGCQ00172536 port of SCGCQ00149660 )  
  - PL: Set the DA SEP as the managing SEP device for a OEM specific enclosure(SCGCQ00181069 port of SCGCQ00084007 )  
  - Fault 1901 running cable breaker with SATA drivers(SCGCQ00188489 port of SCGCQ00177110 )  
  - Workaround for failing to catch EEDP errors(SCGCQ00188871 port of SCGCQ00172683 )  
  - TM requests for SRST on SATA fails(SCGCQ00190438 port of SCGCQ00184968 )  
  - SAS Device Page 0 DeviceName field may be incorrect(SCGCQ00192676 port of SCGCQ00176761 )  
  - port enable completing before all drives discovered(SCGCQ00192711 port of SCGCQ00174426 )  
  - PL: Bad status frame sent (target mode(SCGCQ00194570 port of SCGCQ00184430 )  
  - Unexpected 7C41 fault on some receive path fatal errors in target mode(SCGCQ00194571 port of SCGCQ00180302 )  
  - Fix for controller sending HOLD after SATA device R_ERR of host to device FIS(SCGCQ00194748 port of SCGCQ00168243 )  
  - Observed Faultcode 0x265D(SCGCQ00209574 port of SCGCQ00194816 )  
  - WriteSame(16  translation to SCT Write Same always fails with timeout(SCGCQ00220866 port of SCGCQ00205567 )  
  - Task aborts due to I/O time out(SCGCQ00237407 port of  SCGCQ00194042)  
  - Improve STP connection timing behavior with idle connections(SCGCQ00250302 port of SCGCQ00219929 )  
  - PL: SMP Passthrough of Discover List may time out(SCGCQ00279510 port of SCGCQ00237373 )  
  - pl: TM: an Abort Task may time out with an Abort Task already outstanding at the device(SCGCQ00317273 port of SCGCQ00286353 )  
  - SATA: Link power management requests may fail after device initiated wakeup(SCGCQ00320015 port of SCGCQ00198601 )  
  - CONNECTION RATE value mismatch between incoming OAF and outgoing OAF(SCGCQ00335432 port of SCGCQ00242856 )  
  - Fixed a Case of Bad Coding Practice in Task Management Code(SCGCQ00408968 port of SCGCQ00334159  )  
  - Fixed Defect Introduced to Discovery Initialization Code(SCGCQ00433263 port of SCGCQ00349070 )  
  - Add comment to BT 798 WA header that WA isn't needed as SataOneKTimer functionality was completely removed in HW on B0(SCGCQ00434170 port of SCGCQ00321488 )  
  - Hits data tlb exception during SATL handling for UNMAP command(SCGCQ00438019 port of SCGCQ00357332 )  
  - SAS2 IT - Phase 15 – When SATA Drive is Moved to LU_Control from Stand-By, ASC/ASCQ is Incorrect for REQUEST SENSE(SCGCQ00445308 port of SCGCQ00337315 )  
  - PL: report AttachedPhyInfo data in SAS Expander Page 1(SCGCQ00459939 port of SCGCQ00356264 )  
  - SAS2 IT - Phase 15 – Allocation Length for REQUEST SENSE SCSI Command is not Handled Properly during SATA Drive Format(SCGCQ00462111 port of SCGCQ00334543 )  
  - Fault 0x6820 with IO+TM testing(SCGCQ00463267 port of SCGCQ00357910 )  
  - PL: Update starfish register header to reflect received TTIU(SCGCQ00463401 port of SCGCQ00356504 )  
  - Target Status Send request fails on retry(SCGCQ00472084 port of SCGCQ00338581 )  
  - Don't fail TMs to missing devices if the TM was issued with the DO NOT SEND TASK IU flag set.(SCGCQ00472117 port of SCGCQ00298825 )  
  - Fault 0x584B doing IO with cable pull/glitching(SCGCQ00472420 port of SCGCQ00390565 )  
  - (PL  0x58B4 fault: SAS PLL not becoming ready within 1 millisecond(SCGCQ00473994 port of SCGCQ00382525 )  
  - PL: SATL- SCSI Write Buffer command failure for modes 0x5 and 0x7(SCGCQ00494811 port of SCGCQ00400553 )  
  - File system creation on a SATA SSD drive failed in Linux.(SCGCQ00503260 port of SCGCQ00453641 )  
  - Fault d074 seen while running IOs on multiple SAS and SATA drives(SCGCQ00503701 port of SCGCQ00382251 )  
  - PL Fault d073 seen(SCGCQ00518532 port of SCGCQ00475648 )  
  - Add FPE Exception Q dumps to the pl dbg all dump(SCGCQ00529280 port of SCGCQ00386608 )  
  - Security freeze SATA devices at init time(SCGCQ00553449 port of SCGCQ00315229 )  
  - PL: SAT3 compliance - Implement translation of SCSI Sanitize command.(SCGCQ00553450 port of SCGCQ00357129 )  
  - Cable Management: Allow seeprom retry up to the time allowed by the spec(SCGCQ00555922 port of SCGCQ00407184 )  
  - Fixed Format of Timestamp Debug Print(SCGCQ00556329 port of SCGCQ00408378 )  
  - Fixed Bug in PL Initialization That Gave Priority DMA De-Queuing to Wrong DMA Group(SCGCQ00564103 port of SCGCQ00443879 )  
  - PL cable management: If an user plugs in an optical cable first, the port would be stuck in optical mode.(SCGCQ00565393 port of SCGCQ00467248 )  
  - Check in target error injection code(SCGCQ00565506 port of SCGCQ00393701 )  
  - Fixed Issue with SATA Translation of Security Protocol Out(SCGCQ00566110 port of SCGCQ00447912 )  
  - cli commands iop fpe maxex & maxev value do not allow reseting to the max SOD setting(SCGCQ00566121 port of SCGCQ00457383 )  
  - pl tm rsc does not show the default help message because the default value is incorrect(SCGCQ00566128 port of SCGCQ00457398 )  
  - pl pm memory needs it's parameter to be changed from memoptions to memtype(SCGCQ00566130 port of SCGCQ00457404 )  
  - cli command - pl sfw (Write Starfish register  does not use a base adderess of the Starfish Register(SCGCQ00566150 port of SCGCQ00465339 )  
  - Invader C0: 0x6B02 Fault while putting a PM capable SATA drive to partial or slumber mode(SCGCQ00566152 port of SCGCQ00465563 )  
  - (PL  Implement work around for BT [cobra ]1485.(SCGCQ00566165 port of SCGCQ00481655 )  
  - Fixed Problem with Mid Tracker Debug Code(SCGCQ00566171 port of SCGCQ00484802 )  
  - PL: TM timeout during enclosure pull while running heavy IO(SCGCQ00566173 port of SCGCQ00488106 )  
  - PL:Ensure synchronization when processor writing to memory and then a hardware core for SATL(SCGCQ00566180 port of SCGCQ00493424 )  
  - SATA FDE drive discovering as a regular SATA drive(SCGCQ00566183 port of SCGCQ00501329 )  
  - Check iopiMemoryMove(  Return Status - SMP Start(SCGCQ00566249 port of SCGCQ00477833 )  
  - Check iopiMemoryMove(  Return Status - Trace Buffer Manager(SCGCQ00566251 port of SCGCQ00477835 )  
  - Check iopiMemoryMove(  Return Status - Virtual Expander Manager(SCGCQ00566253 port of SCGCQ00477837 )  
  - Return the phy identifier for more SMP functions(SCGCQ00566263 port of SCGCQ00496987 )  
  - PL: Flush Writes and MemorySyncs in Control Queue and TxFM Cleanup to Ensure Robustness.(SCGCQ00566268 port of SCGCQ00518716 )  
  - PL: Porting firmware transmitter training code(SCGCQ00568426 port of SCGCQ00504071 )  
  - Force Full Discovery does not trigger rediscovery of an expander when the initial expander discovery fails(SCGCQ00568483 port of SCGCQ00358034 )  
  - FP IO's and FW IO's timing out on SATA disks(SCGCQ00596632 port of SCGCQ00563019 )  
  - Whirlwind: Set and clear FPE flags correctly for NVMe drives for TM housekeeping purposes(SCGCQ00649844 port of SCGCQ00640245 )  
  - PL: Identify SSD for SATA devices to use SATA Initialization(SCGCQ00725176 port of SCGCQ00704715 )  
  - PL: IO Stopping on SATA drives during destructive domain test(SCGCQ00725231 port of SCGCQ00563922 )  
  - D025 fault running non-FPE I/O to SATA disk with outstanding FPE I/Os to SAS disk(SCGCQ00725254 port of SCGCQ00604668 )  
  - Negotiated Physical Link Rate in SAS IO Unit Page 0 may not be correct after pulling a cable(SCGCQ00725264 port of  SCGCQ00692836)  
  - PL: Physical port structure is allocated too large(SCGCQ00725359 port of SCGCQ00669712 )  
  - PL: Implement customer specific SAS topology restrictions(SCGCQ00741763 port of SCGCQ00697961 )  
  - Update Attribution Language - Copyright, Trademark, Confidentiality to Avago(SCGCQ00758949 port of SCGCQ00729467 )  
  - Controller firmware returns unexpected SCSI response when NACA bit is set to 1 for unmap and security protocol in/out commands(SCGCQ00781321 port of SCGCQ00704291 )  
  - PL: Firmware could be accessing out-of-bound array elements handling SGPIO bays(SCGCQ00781358 port of SCGCQ00728865 )  
  - Fix a coding error in clean up code.(SCGCQ00781366 port of SCGCQ00729630 )  
						
  - PL: A diagnostic command was using the wrong size for register prints(SCGCQ00781370 port of SCGCQ00730743 )  
  - PL: ATA Pass-through command could return incorrect sector count in the status return descriptor(SCGCQ00793917 port of SCGCQ00726441 )  
  - PL: I2C sent to Direct Attach SEP and SEP NAKs sends wrong IOCLogInfo(SCGCQ00793934 port of SCGCQ00757690 )  
  - PL: IO timeout could happen when I/Os are coming from multiple sources(SCGCQ00793942 port ofSCGCQ00785298  )  
  - PL: Remove unused bits in enclosure and phy structures(SCGCQ00793953 port of SCGCQ00762351 )  
  - 'pl sfw' UART/CLI diag command to write a starfish register was broken.(SCGCQ00816416 port of SCGCQ00802662 )  
  - PL: Disabling Fast Path can cause memory corruption at start of day(SCGCQ00816423 port of SCGCQ00783657 )  
  - Tiger WW: Use controller LMids as SED SMids(SCGCQ00839590 port of SCGCQ00804417 )  
  - Tiger WW: Support Message Unit Reset to reset the messaging unit(SCGCQ00840269 port of SCGCQ00815861 )  
  - Tiger WW: Update to official MPI SED initialization messages(SCGCQ00841599 port of SCGCQ00830343 )  
  - TLB Error due to an already freed MID trying an "OPEN frame" in the SasCore(SCGCQ00848145 port of SCGCQ00813626 )  
  - Invader C0: Performance drops with PL version 0.250.113.0 on 2 R0 volumes behind Cobra(SCGCQ00855687 port of SCGCQ00400569 )  
  - PL: Modifying drive LEDs to specific expander using MPI SEP Request fails(SCGCQ00884017 port ofSCGCQ00873288  )  
  - PL: Out of resource condition may cause IOs to be pended indefinately(SCGCQ00890975 port of SCGCQ00885544 )  
  - PL: The max speed of SATA drives is not limited to 3Gbps by SAS IO Unit Page 1(SCGCQ00894195 port of SCGCQ00553305 )  
  - PL: SAS SPL-2 Drive Spinup Problem(SCGCQ00895314 port of  SCGCQ00892697)  
  - Cutlass A1: 0xC002 fault while doing Cable breaking on I/T Switching(SCGCQ00907375 port of SCGCQ00904531 )  
  - Firmware breaks into megamon with DATA TLB(SCGCQ01098884 port of SCGCQ00797553 )  
  - Fix the coverity issue(SCGCQ01236334 port of SCGCQ01204801 )  
  - Fixed Coverity Issue #15363(SCGCQ01236437 port of SCGCQ01211489 )  
  - Ventura: Remove NVDATA option added to enable PCIe RefClk for backplanes with no backplane mgmt(SCGCQ01303192 port of SCGCQ01279556 )  
  - pl: NVMe: unexpected IO failures with firmware path read/write IOs to an NVMe SGL device(SCGCQ01326943 port of SCGCQ01321013 )  
  - Data corruption on R6 WB VD when there are medium errors on one PD(SCGCQ01328413 port of SCGCQ01314319 )  
  - Ventura: AltData select, RefClk Mux not setup for SGPIO initiator prior to init(SCGCQ01328967 port of SCGCQ01321764)  
  - Ventura/Marlin: backend PCIe: IO halt after a link glitch(SCGCQ01337661 port of SCGCQ01336859 )  
  - RMC and CPLD out of Sync in COL cases(SCGCQ01340361 port of  SCGCQ01338876)  
  - Process all failed lmid in PL_MptDirectIoFailedList for the device that is getting removed before final devIoWait Queue clean up.(SCGCQ01341787 port of SCGCQ01331911 )  
  - PL Fault 0000d074 when run IOMeter overnight R0 fastpath(SCGCQ01346368 port of SCGCQ01331410 )  
  - Port_Not_Required  port of  ) IOs to LD stops while upgrading/downgrading between MR7.1/MR7.2 (SCGCQ01356689 port of SCGCQ01349963 )
  - Firmware should block to downgrade MR 7.2 NVMe profile to MR 7.1 SAS/SATA profile(SCGCQ01358640 port of SCGCQ01357859 )  
  - NVMe-enabled firmware fails to host boot on a blank board(SCGCQ01358762 port of SCGCQ01358750 )  
  - MR firmware hanging while waiting for BIOS restart after COL with power glitch(SCGCQ01365179 port of SCGCQ01291098 )  
  - Fix the smp ready set during device recovery which cause mid get re-used and later on cause pl fault(SCGCQ01384045 port of SCGCQ01338784 )  
  -  Active  port of  ) LB: 4 bytes PD (SA(S address displayed on drive removal/insertion events.(SCGCQ01384430 port of SCGCQ01346338 )
  - iMR driver is not initialized on certain OEM servers.(SCGCQ01397724 port of SCGCQ01375710 )  
  - When there's check condition FW doesn't return proper status and extended status(SCGCQ01401405 port of SCGCQ01396614 )  
  - Interrupting Offload will Lead to Next offload cycle to fail(SCGCQ01403954 port of SCGCQ01399701 )  
  - Active  port of  ) Prevent Improper Flash from I(S(SI (Supported (SBR/FW to nonport of  )I(S(SI (Supported (SBR/FW when Board has I(S(SI Chip (SCGCQ01421154 port of SCGCQ01410666 ) 
  - 9460-16i disappears from F1 setup after encrypting SED(SCGCQ01430654 port of  SCGCQ01326871)  
  - Ventura: Add support for OEM specific NVMe backplane detection and slot LED control(SCGCQ01460731 port of SCGCQ01346574 )  
  - Ventura MR - MR 7.4 not discovering NVMe devices(SCGCQ01462088 port of SCGCQ01453903 )  
  - Active  port of  ) When PFA drive is attached, it does not show predictive failure is detected. (SCGCQ01466076 port of SCGCQ01420232 )
  - Drives in Enclosure spin up values for OEM board is not initialized correctly(SCGCQ01466079 port of SCGCQ01450221 )  
  - MPI SEP request to Slots with invalid SES Page 0A element index may not complete(SCGCQ01487259 port of SCGCQ01482937 )  
  - Create compile option to disable SPL 2 power control(SCGCQ01499175 port of SCGCQ01468141 )  
  - pl: SATL: running large read/write IO to emulated ATAPI target fails with miscompare(SCGCQ00138313 port of  SCGCQ00135825)  
  - PL: PhyStatus Reason Code 0x2 not returned for a removed device(SCGCQ00151679 port of SCGCQ00137491 )  
  - Invalid Command Sequence following Link Reset(SCGCQ00153300 port of SCGCQ00145634 )  
  - Wrong sense format returned when media error is hit on sata drive with greater than 2TB size for VERIFY16 command(SCGCQ00154636 port of SCGCQ00138644 )  
  - Change how discovery handles spinup hold for sata devices(SCGCQ00156017 port of SCGCQ00142955 )  
  - SAS IO Unit Page 8 shows SAS link power management support when unsupported(SCGCQ00169037 port of SCGCQ00163175 )  
  - ModeSense request for Informational Exceptions Page may return zero in MRIE field.(SCGCQ00169459 port of SCGCQ00162847 )  
  - Modification to workaround for failing to catch EEDP errors(SCGCQ00188873 port of SCGCQ00179031 )  
  - INVALID_STATE reply to SCSI IO Unit Control request to remove a device.(SCGCQ00193403 port of SCGCQ00176387 )  
  - 5841 or 4101 fault on cable pull during IO(SCGCQ00232101 port of  SCGCQ00215388)  
  - Security protocol out translation for SAT specific protocol set password/unlock doesn't translate correctly(SCGCQ00237544 port of SCGCQ00227351 )  
  - Remove IOs from a Task Management's abort list if they are completed normally or with error.(SCGCQ00250733 port of SCGCQ00094580 )  
  - PL: SAS Gen-2 Open Reject (No Dest  Tracking(SCGCQ00258361 port of SCGCQ00247227 )  
  - Out of sync Phy cycling leads to an invalid expander details linked list and subsequent Discovery errors(SCGCQ00278342 port of SCGCQ00242703 )  
  - Write same command to a SATA drive that doesn't support SCT write same may write wrong region(SCGCQ00281620 port of SCGCQ00230159 )  
  - Fix handling of SATA drives which don't respond after being reset(SCGCQ00286168 port of SCGCQ00230606 )  
  - SAS2 IT - Phase 14 – Allocation Length for SCSI LOG SENSE Command is not Handled Properly(SCGCQ00315703 port of SCGCQ00283695 )  
  - Task management request with Retransmit bit set may time out in target mode(SCGCQ00317275 port of SCGCQ00294621 )  
  - pl: SATL: Nonzero reserved field during Log Sense (Informational Exceptions  translation(SCGCQ00320751 port of SCGCQ00285005 )  
  - Invader B0: Fault 0xD10E during Destructive Domain test validation.(SCGCQ00411358 port of SCGCQ00343989 )  
  - SAS2 IT - Phase 15 – Read Buffer SCSI Command is Not Failed with CC When ALLOCATION LENGTH is set to Value Other than 512(SCGCQ00433368 port of SCGCQ00329472 )  
  - PL: Do not send up additional SAS Topology Change List Events for phys with a Function Result of Phy Vacant(SCGCQ00437102 port of SCGCQ00307602  )  
  - PL: Improve SATA Non Auto IO management with Fast Path enabled or disabled.(SCGCQ00455696 port of SCGCQ00362952 )  
  - Fixed Problems with Parity Checking Workaround Which Caused 4A00 Fault(SCGCQ00458991 port of SCGCQ00356050 )  
  - Invader: Fixed Transport Layer Retries (TLR  Issue Where a Command Can Sometimes Be Incorrectly Retried(SCGCQ00461980 port of SCGCQ00368444 )  
  - Fault 0x4851 seen when running a setup talking to a target mode controller(SCGCQ00463094 port of SCGCQ00383728 )  
  - (GEMINI  HB Command getting lost(SCGCQ00463360 port of SCGCQ00257597 )  
  - PL Fault 0x620F when inquiry issued to Sata device while a background test is active.(SCGCQ00469663 port of SCGCQ00342770 )  
  - Invader B0: Enable Halt on FPE Requestor/Completor Parity Error(SCGCQ00469913 port of SCGCQ00361819 )  
  - Invader: Updated Runtime Workaround Matrix for C0 Chip Revision(SCGCQ00472981 port of SCGCQ00356255 )  
  - fault d073 with timeouts while running straight IOs(SCGCQ00523634 port of SCGCQ00364113 )  
  - Fixed Issue Caused by Lack of Hardware Cleanup in Rx Context Manager(SCGCQ00550165 port of  SCGCQ00406905)  
  - Cable management: Support I2C mux on the production boards(SCGCQ00553535 port of SCGCQ00392397 )  
  - Fixed 6001 Fault Caused by Defects in Task Management(SCGCQ00562743 port of SCGCQ00421304 )  
  - HwLinkRate in sas phy 0 shows 6G as max link rate and 1.5G as min link rate(SCGCQ00564690 port of SCGCQ00422172 )  
  - Fixed Context Area for SATA Translation of SCSI SANITIZE Command(SCGCQ00566096 port of SCGCQ00423990 )  
  - Controller watch dog timed-out(SCGCQ00566104 port of SCGCQ00440696 )  
  - pl stats resets description needs to indicate that the FPE counters are reset as well.(SCGCQ00566126 port of SCGCQ00457391 )  
  - cli commands pwmview, ps and pmcntr need their descriptions to be fixed(SCGCQ00566129 port of SCGCQ00457401 )  
  - Invader: Initiator getting Open Reject (NoDest  in valid topology(SCGCQ00566157 port of SCGCQ00470884 )  
  - PL Host Based Discovery: Task Management delay in some cases(SCGCQ00566170 port of SCGCQ00484722 )  
  - Check iopiMemoryMove(  Return Status - STP Passthrough PIO Data Received(SCGCQ00566247 port of SCGCQ00477830 )  
  - PL: Add macros to pause and unpause FPE requestor and completor(SCGCQ00566256 port of SCGCQ00481594 )  
  - VALID Bit is Always Set in Sense Data for failing REASSIGN BLOCKS SCSI Command(SCGCQ00568487 port of SCGCQ00456224 )  
  - (Sata Only  Multiple 'Write Verify' SCSI commands with zero data length leads to f/w fault.(SCGCQ00725204 port of SCGCQ00501322 )  
  - SMP Response Received from Previously Removed Expander Causes Callback Stack Underflow(SCGCQ00725230 port of SCGCQ00563292 )  
  - PL: Improve the handling in PL FW while checking the Requestor or Completor’s idle state to increase the FPE performance.(SCGCQ00725280 port of SCGCQ00549891 )  
  - PL: Update EDFBMaxGroupUnload default value to 4 and add debug features(SCGCQ00725281 port of SCGCQ00551447 )  
  - Change TM context TaskMid to TaskIUorSMPMid(SCGCQ00781303 port of SCGCQ00723452 )  
  - PL: Remove unused local pointers(SCGCQ00781305 port of SCGCQ00728910 )  
  - PL: CDB checking was not done properly for devices under format or self-test(SCGCQ00781326 port of SCGCQ00706052 )  
  - Nulling SAS analog front end offsets(SCGCQ00781384 port of SCGCQ00665144 )  
  - Tiger: Implement MPI reply function pointer callback(SCGCQ00840063 port of SCGCQ00816056 )  
  - Fix provided in PL Enclosure Management to check for the upper bounds of Slot Number(SCGCQ00851643 port of SCGCQ00825045 )  
  - PL: Supported VPD pages being sent out of order for SATA drives with Power Condition Page Support(SCGCQ00874474 port of SCGCQ00865796 )  
  - Invader C0: PL Fault 0x5814 while handling Task Management during IO Timeout(SCGCQ00894187 port of SCGCQ00842366 )  
  - sg_unmap command to a SATA drive was not working correctly for the Last Block.(SCGCQ00894194 port of SCGCQ00869961 )  
  - To properly handle the case of configfuring the specific server backplanes of type direct attached SEP and In-band SEP(SCGCQ01004549 port of SCGCQ00994396 )  
  - Data Miscompare found during recovery of CacheCade pinned windows across OCR/Reboot or discard of CacheCade pinned windows while CacheCade degrade flush in progress(SCGCQ01197025 port of SCGCQ01118285 )  
  - Assertion failure in ../../dm/mpt2/mptcmd.c at line 1418 during PD offline on R5 using DIF drives.(SCGCQ01198936 port of SCGCQ01152599 )  
  - IMR FW fails to support 32 configured good drives, during JBOD to good and array removal step.(SCGCQ01198937 port of SCGCQ01161841 )  
  - Coverity issue 15748 and 17765(SCGCQ01249617 port of SCGCQ01241568 )  
  - Implemented new firmware to support 240 PDs and VDs(SCGCQ01277488 port of SCGCQ01238071 )  
  - Active  port of  ) C(SCvd34454 C(SC.nuova,new,stallamr PL: 1MBIO support blocked as we are unable to enable or disable the feature(SCGCQ01292625 port of SCGCQ01287919 ) 
  - HW: DMA hang(SCGCQ01320682 port of SCGCQ01305741 )  
  - Port_Not_Required  port of  ) C(SET: Add handling for firmware upgrade/downgrade incompatible firmware and profile port of  )  (SCGCQ01276905 (SCGCQ01325289 port of  ) 
  - MR7.1 : BBU retentiontest doesnot start(SCGCQ01326931 port of SCGCQ01236513 )  
  - More latency observed during device discovery(SCGCQ01327290 port of SCGCQ01311662 )  
  - Ventura: Add TM IOCStatus to TM Logger(SCGCQ01338919 port of SCGCQ01336984 )  
  - IOMMU fault at address 0x80360000(SCGCQ01346993 port of SCGCQ01279547 )  
  - AVAGAO Option ROM hang was seen after 155 container update(SCGCQ01384638 port of SCGCQ01346450 )  
  -  Active  port of  ) CiscoLBP: Firmware asserted at dm/src/dm.c at line 1701: gDevInfo[pd].dmIoQ.waitQCount == 0 when remove drives to offline VDs(SCGCQ01385116 port of SCGCQ01352158 )
  - Cisco_HSW_Validation: FW should not allow the user to make JBOD when clear drive operation is in progress on the same drive.(SCGCQ01385626 port of SCGCQ01345363 )  
  - Making MCTP interrupt context code FIQ safe.(SCGCQ01391425 port of SCGCQ01387060 )  
  - MR7.1 -587: Flash write Failed with err code 5(SCGCQ01411024 port of SCGCQ01396383 )  
  - Parameter Page Reads fail during ONFI bringup.(SCGCQ01413785 port of SCGCQ01413557 )  
  - Ventura: Implement workaround for device attached to PCIe front end with IDT timer(SCGCQ01448014 port of SCGCQ01401585 )  
  - pl: port enable may fail to complete if an OEM backplane is attached(SCGCQ01464752 port of SCGCQ01455680 )  
  - (PL-Only  Write Verify commands fail to SATA drives when SGLOffset0 is not 0x18(SCGCQ00135589 port of SCGCQ00135587 )  
  - In some cases, the CK_COND bit from ATA passthrough message was ignored.(SCGCQ00168597 port of SCGCQ00159042 )  
  - Transfer count in I/O reply is not always accurate(SCGCQ00172689 port of SCGCQ00166078 )  
  - PL Library code is invalidly using a function parameter where it's not allowed to per the PLI spec(SCGCQ00247175 port of SCGCQ00204054 )  
  - PL: SMP Report Phy SATA failure(SCGCQ00552328 port of SCGCQ00399753 )  
  - (IOP  Ensure synchronization when processor writing to memory and then a hardware core for SMP(SCGCQ00566168 port of SCGCQ00484051 )  
  - Invader: Add Fault Code - Abort Task Missed Its IO with Pend Flag Set(SCGCQ00566201 port of SCGCQ00559156 )  
  - Check iopiMemoryMove(  Return Status - SATL Unmap, Write Same Commands(SCGCQ00566242 port of SCGCQ00476179 )  
  - NVDATA Option to Allow Force Dual Context On(SCGCQ00566265 port of SCGCQ00501686 )  
  - PL: Identify SSD code fails to test for IO start failure(SCGCQ00725168 port of SCGCQ00702716 )  
  - Report Luns Command fails with CheckCondition/Invalid Field in CDB when Allocation length set to Zero(SCGCQ00725240 port of SCGCQ00589463 )  
  - Unexpected IOCStatus in Error Reply when NAK is received by Fury in target mode(SCGCQ00725260 port of SCGCQ00662771 )  
  - WB volumes not getting imported on changing personality from raid to HBA(SCGCQ01198913 port of SCGCQ01135382 )  
  - CSET: FW Pkg: 360: Guest OS encountered error/no controller found while attempting to install windows driver - (SCGCQ01279806(SCGCQ01317686 port of  NA )  
  - ATA Passthrough MPT frame content has overwritten(SCGCQ01348118 port of SCGCQ01339127 )  
  - MR 7.3 PA4: Controller restart command hung during IO on VD's and Jbod's(SCGCQ01357445 port of SCGCQ01343745 )  
  - Flashed based 256 byte VPD programming support(SCGCQ01378115 port of SCGCQ01330751 )  
  - Replacing RAID Controller with Degraded VD Hangs System(SCGCQ01403745 port of SCGCQ01393703 )  
  - MR7.1: Shutdown command received from host" missed in tty log(SCGCQ01411329 port of SCGCQ01389941 )  
  - Flashed based 256 byte VPD programming support(SCGCQ01430628 port of SCGCQ01330751 )  
  - Spare filtering does not prevent NVMe PD from being used as spare for SAS/SATA array.(SCGCQ01478265 port of SCGCQ01441173 )  
  - MR7.3 & 7.4 With iMR Unconfigured NVMe drives become Unconfigured Bad When Converting Them to JBODs(SCGCQ01483142 port of SCGCQ01479017 )  
  - Global HDD LED may not indicate IO activity for NVMe or SAS drives(SCGCQ01496628 port of SCGCQ01489030 )  
  - Device Not added during power cycle test.(SCGCQ00173284 port of SCGCQ00164383 )  
  - SATL: Informational Exceptions log page read fails(SCGCQ00243225 port of SCGCQ00188519 )  
  - SAS2 IT - Phase 14 – Allocation Length for SCSI MODE SENSE Command is not Handled Properly(SCGCQ00315406 port of SCGCQ00285381 )  
  - Enhancement to Debug Information Provided by UART(SCGCQ00435510 port ofSCGCQ00335631  )  
  - SAT3 Compliance - Disabled Background Translation for ATA SCT Write Same(SCGCQ00553526 port of SCGCQ00357132 )  
  - Log Supercap Fault Assertion along with associated status bits during run-time(SCGCQ01282810 port of SCGCQ01011381 )  
  - Static analysis defects(SCGCQ01288653 port of SCGCQ00767988 )  
  - 0x6001 Fault due to a missing IO that went through the IO resubmit path(SCGCQ01369963 port of SCGCQ01330777 )  
  - Ventura: Implement workaround for device attached to PCIe front end with IDT timer(SCGCQ01425032 port of SCGCQ01401585 )  
  - Bugzila 112779 - [SAMSUNG PM863A SSD can not show the "Part Number"/ "FRU Number" information under XCC web w(SCGCQ01448010 port of SCGCQ01435624 )  
  - Host Based Discovery: NegotiatedLinkRate field of SAS IO Unit Page 0 and SAS PHY Page 0 not filled out(SCGCQ00566118 port of SCGCQ00456290 )  
  -  Port_Not_Required  port of  ) Dev defect: To checkport of  )in Intruder specific params page update changes.(SCGCQ01198968 port of  SCGCQ01155893)
  - Enable I2C polling for drive presence detection in VPP Type B backplanes with NVMe support.(SCGCQ01460733 port of SCGCQ01375330 )  
  - Spare filtering does not prevent NVMe PD from being used as spare for SAS/SATA array.(SCGCQ01466124 port of  SCGCQ01441173)  
  - Fast Path IO is not failed for LDBBM table entries(SCGCQ01466133 port of SCGCQ01452385 )  
  - Replace POM0 usage with SysDma(SCGCQ01448534 port of  SCGCQ01430023)  
  - Added NVME passthrough support for MR stack(SCGCQ01451159 port of SCGCQ01391416 )  
  - 930-16i Cannot Spinup HDD During System Power On(SCGCQ01472470 port of SCGCQ01470741 )  
  - MR 7.4 - PDs pull/push led to "Assertion failure in ../../cpu/arm/exceptions.c at line 938: 0"(SCGCQ01484822 port of SCGCQ01460017 )  
 
 
 EnhancementRequests:
-Gen3: SHELL Performance Monitor (SCGCQ00095392)
- Add support for new TxFM interrupts in Colt(SCGCQ00105521)
 -Manufacturing Config settings for End Device Frame Buffering(SCGCQ00123628)
 -TBM: Implement plTBMGetTraceDword(SCGCQ00127520)
 -Add basic support for new hardware block state timers in SAS core blocks(SCGCQ00127730)
 -Updates for SAS Core changes to Rx/TxBuffer alias addressing(SCGCQ00127731)
 -Gen3: TBM (SCGCQ00127747)
 -Add handlign for new TxFM interrupt(SCGCQ00129375 )
 -Modify mfg page 3 to incorporate back channel training.(SCGCQ00131013)
 -pl: Power condition support in SATL: Start/Stop Unit(SCGCQ00131188)
 -Allow Config Write Current of Manufacturing Page 5 after PortEnable(SCGCQ00131631)
 -TBM: Incorporate a FW header in the Extended Buffer for the parser(SCGCQ00132403)
 -PL: review usage of TxDmaStart Busy(SCGCQ00135548)
 -Gen3 PwrMgmt: Integrate individual power management components into chip(SCGCQ00136952)
 -Gen3 PwrMgmt: Add IOP support for PCIe Dynamic Power Allocation (DPA)(SCGCQ00136955)
 -Add 8 bits to MidTracker and use for FPE (or as needed)(SCGCQ00140772 )
 - FPE - instead of faulting on IOP Request Q full, error reply back IO with ISTATUS_NOT_HANDLED(SCGCQ00141509)
 -PL must start/stop timers for IOs if IOP is using Cuda Timing Wheel and PL starts IO directly to colt(SCGCQ00141735)
 -Update project to the Phase 7 MPI Header Files(SCGCQ00141743)
 -Invader: Incorporate Colt EDS 1.1 support for modified QM registers.(SCGCQ00141765)
 -Ensure RX DMA IO cleanup matches latest Colt EDS 1.1(SCGCQ00141768)
 -colt EDS 1.1 updates to colthw.h(SCGCQ00141814)
 -additional EDFB checks(SCGCQ00142947)
 -Add some FPGA workarounds currently needed to FPGA build(SCGCQ00142976 )
 -Update plClearTxCtxMgrDmaPassthruInt(U32 TransNum) for dual context(SCGCQ00143260)
 -FPE disabled on a device operation should also set the HW Device table bit that forces SASCore to route completions to Firmwa(SCGCQ00143919 )
 -Set up the SGL flags according to the MsgFlags so the sense data goes to the righ memory space.(SCGCQ00143985)
 -Gen3 Task Mgmt Debuggability & Testability Improvements (SCGCQ00144418 )
 -FPE: Disable/Mask all Cuda Interrupts before Cuda Int and Enable/Unmask them after(SCGCQ00144452)
 -convert pliDevHandleFind() to PL only function(SCGCQ00144456)
 -Invader: Update files to support dual context DmaTransmissionQs. (SCGCQ00144611)
 -Add support for LD state table in Cuda(SCGCQ00144627 )
 -Gen3 Task Mgmt: Check SATA IT_NEXUS RESET response to SRST(SCGCQ00145028)
 -FPE: Upgrade the FPE Init process to initailize Detroit memory more elegantly(SCGCQ00145070 )
 -FPE (SCGCQ00145411)
 -set PoolTxDMAs option to 0(SCGCQ00145649)
 -Investigate the remaining SATA cases where FWFlags_NonAuto is used to see if the SATA dev Table NonAuto is sufficient(SCGCQ00145753)
 -FPE (SCGCQ00146696 )
 -SATA: mark sata device fast path capable.(SCGCQ00147727)
 -For FPE Exception Queue(s), add mid valid type check capability(SCGCQ00147961)
 -Update PLI to allow passing of VF Request Q sizes(SCGCQ00148029)
 -Update iopiMemoryMove Function for Gen3(SCGCQ00148770) 
 -pl: Add an ATA command needed for ACS(SCGCQ00149006)
 -txdma cleanup changes from Colt EDS 1.21(SCGCQ00149016)
 -colt eds 1.21 dma Q cleanup changes(SCGCQ00149017)
 -TBM: Update pliFpeCheckpointOrTraceInterrupt with Trace Buffer interrupts handling(SCGCQ00149046)
 -Set Qmgr Debug reg bit 20 to 1 during Qmgr init(SCGCQ00149247 )
 -FPE: Add PLI contreq function to support "Route All To Exceptoin Queues" bit in FPE Control reg(SCGCQ00149686)
 -add PLI control request support for Vendor Specific case 1(SCGCQ00149688)
 -add PLI control request support for FPE Config 3 FpUseLdTableFlags bit(SCGCQ00149689)
 -update PLI Control request PLI_CTRL_REQ_OPERATION_FPE_SET_LD_TABLE_BASE to also set size of LD table(SCGCQ00149690)
 -pl: Allow sense data for ATAPI device to go to other address space than just pci(SCGCQ00150256)
 -FPE: Firmware changes for Detroit 1.2 EDS release(SCGCQ00150513)
 -SAT3 update: Use Download Microcode DMA if the device supports it(SCGCQ00151344)
 -SAS(SCGCQ00151863)
 -SAS(SCGCQ00153239)
 -FPE (SCGCQ00155475)
 -Set the lower two bits of the context address correctly when messing with non (SCGCQ00155499)
 -Gen3: Support FPE NVDATA changes(SCGCQ00155854)
 -EDFB: free DMA Group when expander structure is de(SCGCQ00155912)
 -pl: make sure TM and hw clean up code doesn't use mid 1(SCGCQ00156442 )
 -Add handling to various interrupts generated by the context non auto bit being set during task management.(SCGCQ00157017)
 -FPGA: FPE needs to flush mid state writes through PLB before posting IO to Cuda's IOP Start Queue from PL(SCGCQ00158620)
 -Remove 250ms delay at the end of TMs(SCGCQ00159959)
 -Change Trident FMU address macros to match correct hardware address decodes(SCGCQ00159978)
 -Add indication of FPE enabled/disabled to pl status UART command for each device(SCGCQ00160296)
 -Include debug strings in diag buffer(SCGCQ00161332)
 -Macro for setting device state table fpe flags(SCGCQ00161423 )
 -FPE: rework when/how FPE is enabled for SATA devices (SCGCQ00161435 )
 -FPE: implement start pending IO function for FPE devices(SCGCQ00161456)
 -FPE: add MID State table dump to the existing UART mid dump cmd(SCGCQ00161659)
 -FPE: add FPE dev state table dump to existing UART per device cmd(SCGCQ00161660)
 -Performance counters (SCGCQ00163008)
 -FPE: add some more debug to Requestor and Completor error/faults(SCGCQ00163734)
 -TBM: Add debug code for TBM errors(SCGCQ00164570)
 -PL Light: add pliLight equivalent for get mid state table info(SCGCQ00165286)
 -Remove #if PL_FEATURE_TM_ENHANCE_(ALL, MEDIUM, BASIC) from gen3 code(SCGCQ00166369)
 -plTaskMgmt.c cleanup(SCGCQ00166732)
 -FPE: remove Cuda timer if IO is timed by cuda and TM aborts it(SCGCQ00168251 )
 -FPE: changes to ioflags usages for reply destination and ignore context(SCGCQ00168410)
 -pl: FP IOs started by pl would print out the lba of the command(SCGCQ00168434)
 -FPE: Comments to WA for BT 762(SCGCQ00168742)
 -Update TM code to comply with new cuda pend list cleanup(SCGCQ00168994)
 -Update Outstanding Mids in SASCore HW cleanup for gen3. Remove RxFS nomenclature.(SCGCQ00169015)
 -Add API in Gen3 to manage power modes of Starfish SERDES phys.(SCGCQ00169389)
 -FPE: add support for exception FPESTATUS_FPE_MU_REQUEST(SCGCQ00169460))
 -Fail the sata io if the driver tries to send a large cdb(SCGCQ00169712)
 -FPE: TM abort list should be checked when handlign Cuda Timer Wheel timeouts(SCGCQ00169942)
 -FPE: further tweaks to the add/remove FPE timer functions(SCGCQ00169943 )
 -Turn on LL parity checking(SCGCQ00170270 )
 -Add print out of the Abort list for a TM when it causes a fault.(SCGCQ00170549)
 -Update TM Tracker functionality (SCGCQ00171097)
 -pl: update starfish registers to EDS 1.4(SCGCQ00172537)
 -HW WA (SCGCQ00172588)
 -Detroithw.h changes to support Detroit EDS 1.35(SCGCQ00173443)
 -Add PLI defnies for FPE Power Savings modes(SCGCQ00173648)
 -Report to host the offset of first EEDP error (SCGCQ00175700)
 -Firmware handling for non(SCGCQ00176261)
 -Update RxCtxMgr Cleanup to match new gen3 hardware functionality(SCGCQ00178840)
 -don't enable LINK_SIGNALLED_ERROR in rxFM and rxCtx(SCGCQ00179174)
 -HW WA (SCGCQ00179251)
 -Update DMA Transmission Queue cleanup to check 256 DMA groups(SCGCQ00179253)
 -Add #defines for access to dma engine registers.(SCGCQ00179629)
 -FPE: Investigate optimizing FPE invalid descriptor handling(SCGCQ00180215 )
 -Remove [SAS2Core] 1650(SCGCQ00180225)
 -Remove [SAS2Core] 766 (SCGCQ00180303)
 -PL: allow each phy to initialize its electrical parameters from the proper phy group(SCGCQ00181727)
 -Add initial support for R25 (B0) SASCore version(SCGCQ00184044 )
 -Update TxCtMgr NonAuto handling to match ColtEDS1.4(SCGCQ00184341)
 -Invader A0 bring up(SCGCQ00186022)
 -allow phy to link up at 6G(SCGCQ00186469)
 -Gen3: support SAS Notify Power Failure Expected (EPOW)(SCGCQ00186531)
- Check in the consolidate serdes values for all link rates(SCGCQ00186615)
- Update colt.h with new field value for hardware parameters 0(SCGCQ00186660)
 --FPE: Add PLI interface to allow IOP to write MSindex, VF_Id and SMID into Cuda's MST(SCGCQ00187301)
 -Update serdes values based on SE's recommendation(SCGCQ00188253)
 -Setup RxEEDP with a more reasonable time duration HW should wait before going into low power mode(SCGCQ00189198)
 -Increase the number of SGE's PL will print(SCGCQ00189211)
 -Need a PLI control request to get the SAS core version(SCGCQ00192893)
 -Adaptive Serdes settings(SCGCQ00194276)
 -EDFB: flag if non(SCGCQ00199495 )
- Add R27 SASCore recognition(SCGCQ00199520)
- Update TM to have a "marker" mid for the Colt(SCGCQ00199733 )
 -New serdes settings from SE(SCGCQ00200293 )
 -Add FW support for new B0 RxFM/RxCM"WrongDataDirection interrupts(SCGCQ00202861)
 -Put in a workaround from gen2 for a Close (Clear Affiliation) issue(SCGCQ00204226)
 -Check on handling RegAccErr interrupts(SCGCQ00205704)
 -Setup SSC down spreading based on SE's recommendation(SCGCQ00208582)
- implement new serdes settings(SCGCQ00209730)
- Invader Performance: Do not allocate FPE queue when disabled (SCGCQ00209915)
- PL: check in new serdes settings(SCGCQ00213218)
- Update SnC Method (08/16/2011 3:54 PM)(SCGCQ00213372 )
- FCS: FCS enable on Invader must be based on inbound phy on Cobra(SCGCQ00217065)
- Update TxDma SnC 8/22/2011 3:02 PM(SCGCQ00220010)
- Update SnC Method to restore power management values after a full reset(SCGCQ00221381 )
- Further performance related enhancements to printing/TBM code(SCGCQ00221673)
 -Invader A0: optimize prints to disable io printing when TBM is enabled(SCGCQ00222985)
 -Invader A0 PL FPE Start IO performance optimzation(SCGCQ00223252)
 -Invader A0: PL to FPE IO Performance optimizations Stage 2(SCGCQ00223517 )
 -Updates to new SnC Method from HW.(SCGCQ00224783)
 -Active cable support part one(SCGCQ00225179)
 -Add DCR reg info on SASConfig Reg Fault 7C53(SCGCQ00225800)
 -Active cable support part two(SCGCQ00226322)
 -Invader A0: FPE Io Path Optimization(SCGCQ00226323)
 -BT [invader]1055 Workaround changes(SCGCQ00228609)
 -Need a mechanism to enable ALF bit in PllcControl register (PLB Offset 0x10) (at least for direct attached drives)(SCGCQ00229311)
 -Update HostDifMemoryThreshold and CacheDifMemoryThreshold per hardware group's request(SCGCQ00229833)
 -Add a check for SMP frames in the Dual context reset algorithm(SCGCQ00231957)
 -Initialize Port Layer Settings such as ALF bit and Port Link Availability initial count from Man Page 17(SCGCQ00237340)
 -(SAS3 IR) Enhance Handling of Fast Path I/Os to Fast Path Disabled Devices to Prevent Unwanted Device Writes (SCGCQ00237718)
 -Investigate a method to have PL always turn FPE back on at the end of TM(SCGCQ00242895)
 -BT 1629 WA implemenation(SCGCQ00244096)
 -Change a variable name to reflect the usage of the variable better(SCGCQ00245503)
 -STP AlwaysActivated needs to be turned off for a device when doing non(SCGCQ00246290)
 -PL: update PL_SATA_DATA_BLK_RES to 0xF per SE's request(SCGCQ00247864)
 -Active cable management: Clear I2C retry counter once the cable is unplugged(SCGCQ00249923)
 -Initialize BcMaxSeg to the correct value(SCGCQ00254062)
 -A modified IT controller firmware build is needed in order to test Fastpath IO Timer functionality(SCGCQ00254775 )
 -Remove Link Multiplexing support(SCGCQ00258634)
- Define new bit fields in a starfish register(SCGCQ00259496 )
- Minor Definition Changes to Fast Path Engine for Forward Compatibility(SCGCQ00260013 )
 -Invader A0: (PL) Manage and restructure diagnostic command source code.(SCGCQ00261860 )
 -Disable BT1486 WA due to the heavy performance impact(SCGCQ00265982)
 -Starfish B0 changes (SCGCQ00266473 )
 -Support SGPIO Group ID slot enumeration for non(SCGCQ00271338)
 -PL: Update to the latest 1.1 serdes settings for Invader B0(SCGCQ00276158)
 -Invader B0: FPE New Feature Validation Test instrumentation(SCGCQ00279184)
 -Print out starfish label when dumping starfish registers (SCGCQ00281681)
 -Added Cable Management file to PL makefile(SCGCQ00284543)
 -Latest serdes settings for back channel training(SCGCQ00286360)
 -Help with connectivity for SATA drives(SCGCQ00296972)
 -Register setting to help with back channel training(SCGCQ00298482 )
 -PCIe interrupt (INTx, MSI/MSI(SCGCQ00308797)
 -Implemented Hardware Work Around: DMA Engine Asserting Invalid Rollover Interrupt(SCGCQ00313865)
 -Invader B0: Certain key customer specific status flags not getting set properly by hardware during exception handling.(SCGCQ00314499)
 -(IOA) Added firebird.h(SCGCQ00323012 )
 -Added a PLI Control Request Operation To Get Count of Known EDFB (DataBolt) Enabled Devices(SCGCQ00333765 )
 -[Dauntless]: Prevail HW header file(SCGCQ00337003)
 -NVMe Mode Sense and Mode Select translations(SCGCQ00338540)
 -(IOA) Add initialization for new functions in DV Firebird core(SCGCQ00343530)
 -Additional SCSI to NVMe translations(SCGCQ00345822)
 -Added support for nwe IO accelerator completion queue(SCGCQ00347555)
 -(IOA) Add Invader(SCGCQ00350778)
 -pl pci: Discovery and Device Manager(SCGCQ00352772)
 -(STANG) Implement PCE (stang) exception and completion queue interrupts(SCGCQ00362507)
 -Distribution of PCI space obtained from the host amongst PDB PIM windows.(SCGCQ00362905)
 -Backend PCIe device memory allocation (part 1)(SCGCQ00365971)
 -Backend PCIe device memory allocation (part 2)(SCGCQ00372536)
 -(PL(SCGCQ00377476)
 -Disable Invader workarounds that were fixed in Dauntless Colt core(SCGCQ00385300)
 -(IOP) Compile in security options on FPGA for DAUNTLESS(SCGCQ00386217)
 -More NVMe related changes(SCGCQ00390988)
 -FPE trace buffer prints for PCIe devices(SCGCQ00394555)
 -Update Silverhawk and Prevail PIM/POM settings to support Subtractive routing(SCGCQ00394770)
 -Backend PCIe: Allow de(SCGCQ00397609)
 -Additional diag console commands(SCGCQ00398216 )
 -Queue full handling for NVMe admin queue(SCGCQ00399212 )
 -Add PCIe Link config pages to read and configure PCIe link error and event counters(SCGCQ00400394)
 -FW Read/Write IO Path (SCGCQ00400467)
 -FW Read/Write IO Path (SCGCQ00400472 )
 -NVMe: Update NVMe non read write translations(SCGCQ00401386)
 -(IOA) Modify IOA Timer RAM initialization for FPGA(SCGCQ00402245 )
 -New debug information (SCGCQ00412145)
 -Add max payload workaround for Lecroy NVMe device emulator(SCGCQ00414595)
 -NVMe: Read/write IO breakup for PRP format SGLs(SCGCQ00415503)
 -NVMe: Command timing during NVMe init(SCGCQ00417756 )
 Add PLI control request for getting host memory page size(SCGCQ00418127 )
 -Move PCIe PL CLI commands to a new file(SCGCQ00419456)
 -SOP/PQI Device Initialization and base IO support(SCGCQ00426938)
 -MPI 2.6 Rev. B Feature Section 17.3.20.3: Add support for PCIe Device Page 2(SCGCQ00432568)
 -SAS3.5:DL: Implement UART commands to show debug data for PCIe Switches(SCGCQ00434290)
 -Add support to Hot Reset PCIe Device(SCGCQ00436875)
 -NVMe: command level error handling(SCGCQ00440187 )
 -Handle host FastPath IO completions while FastPath is disabled(SCGCQ00442786)
 -Added IO Unit Control Request in MPI v2.6 B to replace existing SAS IO Unit Control Request(SCGCQ00443274)
 -Use MPI 2.6 RevB Port Request flag define for FIS porting request in IoFlags field of SCSI IO Request message.(SCGCQ00443277)
 -MPI 2.6 Rev. B Feature: Section 17.3.2.8: Added BoardPowerRequirement and PCISlotPowerAllocation fields to IO Unit Page 7.(SCGCQ00443278 )
 -Added setting of DeviceInfo field on Device Page 0(SCGCQ00443285)
 -Add IT NVDATA to MR PL Object Library Release(SCGCQ00446684 )
 -Update AHCI variables to match latest MPI 2.6 release(SCGCQ00447777)
 -SAS3.5: Move ALADIN HW defines and register structures to separate header file under \common\hw.(SCGCQ00448020)
 -Add support for SATA translations which rely on data DMA for AHCI devices.(SCGCQ00448298)
 -Change SASIoUnitControl to IoUnitControl for Dauntless sources(SCGCQ00456975)
 -NVMe: Native SGL validation mode(SCGCQ00459734)
 -AHCI Error Handling (SCGCQ00459851)
 -AHCI: Add handlers for requester/completer errors(SCGCQ00459876 )
 -NVMe: FxCore IoError handling(SCGCQ00461439)
 -More SOP IU Error handling(SCGCQ00464488)
 -Update "pl status" CLI command to indicate PCI Device Type(SCGCQ00471842 )
 -Rudimentary Advanced Error Reporting support(SCGCQ00473858)
 -Update PQI and SOP header files to latest revision(SCGCQ00474533)
 -Add dump of all message frames to "pl dbg"(SCGCQ00476283)
 -Ventura: NVMe: Shutdown notification for NVMe devices.(SCGCQ00477716)
 -Ventura: Stang IOP control queue depth management (SCGCQ00478691)
 -SOP: Base device error handling during Init(SCGCQ00479555)
 -Ventura: PL Dual/Multiple Iop Completion Queue (MR(SCGCQ00481273)

 -NVMe: PCI legacy interrupt support(SCGCQ00481656)
 -Update PQI header to latest revision(SCGCQ00482105 )
 -Print additionl information on PCIe Error Messages and Fault on unhandled PCIe errors(SCGCQ00487994)
 -Encl Mgmt: Support for the new PBAM LED control and SGPIO HW block(SCGCQ00490950)
 -No check for good status in pliFpeGeneralErrorInterrupt((SCGCQ00490961)
 -Add and improve config space dump for debug commands.(SCGCQ00492503)
 -Ventura: Investigate Performance Monitors(SCGCQ00492549)
 -Add IOCount to Admin Commands(SCGCQ00494444)
 -SOP: Base device error handling for IO exceptions(SCGCQ00494457)
 -Cleanup the TxDMA dual context and DMA groups code based on new HW functionality in Intruder SAScore(SCGCQ00496009)
 -Improve Back End PCIe fault marker(SCGCQ00498145)
 -SAS Gen3.5 Additional PCI Encapsulated MPI Message Support (SCGCQ00498556)
 -Update PL for Colt changes in TxDMA TxCM Interrupt registers(SCGCQ00518333)
 -PL: SOP/PQI Task Management support(SCGCQ00521567)
 -Allocate from IOA Local RAM(SCGCQ00521570)
 -Ventura: Combo Serdes Wrapper Support(SCGCQ00521573)
 -Ventura FPGA: Support FPGA specific back end SerDes(SCGCQ00521574)
 -Ventura: Silicon Address Map Changes(SCGCQ00521681)
 -SAS3.5FW: Colt changes: Update register definitions for Queue Manager changes(SCGCQ00527271)
 -PL (Ventura): Gracefully handle some unexpected completions from NVMe target devices(SCGCQ00527872)
 -Enterprise PIM/POM setup(SCGCQ00552409)
 -Enterprise: register usage and indexing in the backend PCIe code(SCGCQ00552412)
 -Enterprise: base core initialization(SCGCQ00552422)
 -Ventura: Enterprise: sub(SCGCQ00552432 )
 -SOP SGL translation updates(SCGCQ00562155P)
 -NVMe: Update translations to the latest version(SCGCQ00562270)
 -Update SOP to latest revision (SCGCQ00563327)
 -NVMe: Extended Inquiry Data VPD page (SCGCQ00563906)
 -Port PL and CFGI library builds to ARM for Ventura(SCGCQ00564814)
 -NVMe: Support for Mode Sense (10) LLBAA flag(SCGCQ00571441)
 -Develope Boot Loader Build Process for ARM(SCGCQ00571692)
 -Ventura: Add support for new interrupts in Raptor SAS core(SCGCQ00572622)
 -Port Ethernet Library to ARM(SCGCQ00579966)
 -Added new function for safe backend PCIe writes(SCGCQ00603244)
 -Intruder: TLB changes to match new top(SCGCQ00603459 )
 -Update the PLI memory allocation code to account for multiple SAS cores(SCGCQ00603491)
 -Update Discovery code to support up to 32 phys/ports (direct attach only)(SCGCQ00605435)
 -PL: Update Discovery code to support up to 32 phys/ports (expander attach)(SCGCQ00605438)
 -Intruder PL: update to new IOA Cuda block in Charger(SCGCQ00606253)
 -Ventura: SAS Persistent Connection support(SCGCQ00612657)
 -Modify basetype.h to be device independent(SCGCQ00612747)
 -Ventura: Ventura Temperature Monitor Support(SCGCQ00612780)
 -Ventura: SAS Control Queue FIFO support(SCGCQ00612801)
 -Enterprise preparation: root complex organization(SCGCQ00613905)
 -Updated PCIe IO accelerator header files(SCGCQ00619567 )
 -PL: update SAS Core DCR interface for multiple SAS cores(SCGCQ00620384)
 -PL bringup on Intruder FPGA(SCGCQ00620516)
 -Intruder FPGA updates(SCGCQ00621476)
 -Ventura: Create fast POST memory routines using Neon similar to ARM memcpy(SCGCQ00622834)
 -PL support for multiple SAS cores during initialization(SCGCQ00623972)
 -Enterprise: EDS 1.11 header file(SCGCQ00624245)
 -Ventura: IOA (SCGCQ00628235)
 -Modified AHCI code to use new safe accessor functions for PCIe read/write(SCGCQ00630188)
 -Modified NVMe code to use new safe accessor functions for PCIe read/write.(SCGCQ00630198)
 -Handle phy lynk table interrupts on multiple SAS cores(SCGCQ00630409)
 -PL: Extend PL to handle port layer interrupts on multiple SAS cores(SCGCQ00630410)
 -PL: Extend PL to handle Tx interrupts on multiple SAS Cores(SCGCQ00630412)
 -Handle phy layer interrupts on multiple SAS cores(SCGCQ00630413)
 - (SCGCQ00633869)
 -Update the trackers and complete the porting for the interrupt handler functions.(SCGCQ00634613 )
 -Updated header files for hardware names(SCGCQ00637211)
 -Update PLI_SET_SOD_PARAMS as per new PLI spec(SCGCQ00637694)
 -PL: Add macro to get SAS core number from Device Handle(SCGCQ00638460)
 -PL(SCGCQ00638922)
 -Modified AHCI error handling to use new safe accessor functions for PCIe read/write(SCGCQ00639213)
 -Ventura: NVMe: update device information after a Format Unit(SCGCQ00639223)
 -PL: supportive changes for Tx and Rx interrupt handling for multiple SAS cores(SCGCQ00639788)
 -Add ALADIN support to Ventura. (SCGCQ00642196)
 -Replace PCIe read/write accesses to SOP/PQI devices that are currently performed using TLB mappings with safe accessor functions.(SCGCQ00642669)
 -Ventura: SIO/LED control enable PCI/SAS device activity support(SCGCQ00642853)
 -Ventura: SerDes header file changes(SCGCQ00643953)
 -PL(SCGCQ00644879 )
 -PL: update SMP Engine (initiator) to support multiple SAS cores(SCGCQ00646717)
 -Ventura: Local Chain Support (CR(SCGCQ00647786)
 -Ventura: IOA NVME SOP Hang Detection (CR(SCGCQ00647800)
 -Add multi SAS core support in lower layer functions called from phy interrupt handlers.(SCGCQ00648004)
 -Updated PL to add multi SAS core support for FW controlled spinup(SCGCQ00648006 )
 -PL: update phy/port configuration to handle multiple SAS cores(SCGCQ00649069 )
 -Update usage of IOC_NUM_PHYS(SCGCQ00649610)
 -Initial FxCore bring up(SCGCQ00649914)
 -PL: Change PhyNum in struct PL_INTR_SOURCE to represent chip phy number(SCGCQ00652141)
 -Ventura: Change readPIR() macro to something more generic(SCGCQ00652365)
 -Ventura: Enterprise: revisit base core init(SCGCQ00655157 )
 -Intruder PL:Changes needed for Link Reset to support multi SAS core(SCGCQ00660481)
- Change Serdes module code to account for multiple SAS cores(SCGCQ00660485 )   
  - Modify Diag commands to handle multiple SAS core.(SCGCQ00661114)
  - Intruder: modify SAS Core base address and size, and update FW effective address map(SCGCQ00661523)   
  - PL: power management code cleanup(SCGCQ00663208)
  - Enterprise: preparation for Enterprise interrupt and device interrupt support(SCGCQ00664180)
  - multi-SAS Core support to SAS Phy config pages(SCGCQ00665134)
  - Intruder: Register dump of all SAS Cores(SCGCQ00665865)
  - Backend PCI: add compile option for MSI(x  vector masking code(SCGCQ00668595)   
  - Backend PCI: move device interrupt info structure(SCGCQ00668627)
  - Enterprise: additional preparation for device INTx support(SCGCQ00668628)
  - PL Sim additonal work(SCGCQ00668850)
  - SOP: update init state machine(SCGCQ00669451)
  - Add check for Detroit PLB parity error by reading DCR regs(SCGCQ00669726)
  - Removed remaining Invader A0/B0 Hardware WorkaroundsSCGCQ00669729)
  - Intruder: Update plRemoveDevice to work with multiple SAS cores(SCGCQ00669830) 
  - Ventura: SIO/LED control initialization	(SCGCQ00671021)
  - Update code to clean up QM's linked list, for multi SAS core support(SCGCQ00673097) 
  - Ventura: SOP TM updates	(SCGCQ00675384)
  - Intruder: Adapt plDMATransQCleanup(  for Multiple SAS Cores	(SCGCQ00675684)
  - Intruder: Top level TM multiple SAS Core support(SCGCQ00675694)
  - Intruder PL: Update phy port config code when Auto Port Config is OFF(SCGCQ00676414) 
  - Intruder: Adapt target mode cleanup functions to multiple SAS cores(SCGCQ00677027)
  - Clean out MUTLI_SASCORE markers in plPortLayer.c(SCGCQ00680531)
  - Ventura: Enterprise: DM PCIe Core start of day configuration(SCGCQ00680765)
  - Ventura: Create Release ANSI builds for Validation(SCGCQ00682063)
  - Ventura: Enterprise: update header file for new product definition(SCGCQ0068282)
  - PL: Remove plCompileOptions.h from the list of files needed for pli	(SCGCQ00682887 )   
  - Cleanup some MULTICORE_SAS_WORK_NEEDED defines	(SCGCQ00683281)
  - PL: multi-SAS-Core work in plAhciMisc.c and plSataMisc.c (SCGCQ00683369)
  - Intruder: Update FPE completor error handling to support multicore	(SCGCQ00684383)
  - Intruder: Turn FPE SAS Completion Queue registers into an array like in Ventura	 (SCGCQ00685117  )  
  - Migrate GHS toolchain to version 6.1.4 (SCGCQ00685242)
  - Ventura: Enterprise: PCIe IO Unit Page 1 write handler(SCGCQ00686614)
  - Ventura: merge SAS phy devhandle and PCIe phy devhandle usage(SCGCQ0068667)
  - PL: Internal debugging information	(SCGCQ00687538)    
  - Intruder: modify PL build/release process to include IntruderFpga.xsd(SCGCQ00688174) 
  - PL: Starfish EDS v2.7 updates(SCGCQ00688251)
  - Intruder & Ventura: Consolidate Reply Destination defines across various Cuda cores(SCGCQ00688686)
  - Ventura: Update FPE Diag cmds for FPE registers(SCGCQ00688721)
  - Update SAS/Sata Task Management code due to Ventura HW changes(SCGCQ00689006)
  - Ventura: Create helper functions and macros to navigate between PCIe device and enumeration structures.	(SCGCQ00689874)  
  - Ventura: backend PCIe: revise devhandle macros(SCGCQ00690231)
  - Ventura: Enterprise: backend link speed/width control code	(SCGCQ00690945)
  - Code cleanup of PL_MULTI_SAS_WORK_NEEDED defines/comments(SCGCQ00691105)
  - Ventura: backend PCIe: link to root complex mapping	(SCGCQ00692020)
  - NVMe: improve fabricated WWID for non-1.1 devices(SCGCQ00693948)
  - Ventura: Support to manually add completion entry in to FxCore Completion queues; FPE or IOP(SCGCQ00694239)
  - Ventura: Support to send MID’s in FxCore FxRequestor engines to Exception queue for TM trapping(SCGCQ00694241 )   
  - Ventura: Support for HW CR to perform device handle check for PCIe device IO completions(SCGCQ00694244)
  - Ventura: Implement new PCIe Discovery SM(SCGCQ00694262)
  - Ventura: Enhance PCIe Discovery to support switches without DLL Link Active Reporting capability(SCGCQ00694264 )   
  - Intruder: Update plGetNumberOfSASCores to determine the number of SAS cores from CCR register(SCGCQ00695533)
  - Ventura: CSW Spico Firmware Image (SCGCQ00696945)
  - Intruder, Dauntless & Ventura: Update usage of PLISingleContextDMA to account for representing multiple cores (SCGCQ00700542)    
  - Intruder: implement HW WA for SCGCQ00696319 (SCGCQ00700743)
  - NVMe: modify idle wait during init	(SCGCQ00703473)
  - NVMe: slightly rearrange PCIe DevDetails NVMe flags	 (SCGCQ00705509)
  - SAS3.5: Separate out SAS Phy Power Management so we can compile out the code if it is not working properly.	 (SCGCQ00709570)    
  - Cleanup PL_MULTI_SAS_WORK_NEEDED in plDiagCmdPwrMgmt.c	(SCGCQ00710194)
  - Ventura: Process TM Marker Mid in PCIe DevH Mismatch error interrupt(SCGCQ00712814) 
  - Backend PCIe: debug code for backend/local address correlation	(SCGCQ00713761)
  - Add Multi SAS Core support to initiator added functionaility (SCGCQ00713914)
  - Intruder: Remove IOCount Increment/Decrement prints	(SCGCQ00715166)
  - More multi core upgrades to Target Mode code(SCGCQ00715204)
  - Fix access to initiator table for Target Mode(SCGCQ00716824)
  - (Target Mode  Update endiannes of SASAddress while adding initiator into Hw Initiator Table	(SCGCQ00716852)    
  - (PL  More Target Mode Multi Core support(SCGCQ00722556)
  - PL NVMe: Updates to internal structures	(SCGCQ00723588)
  - PL: Implement section 7.7 of the NVMe specification	(SCGCQ00723596)
  - PL NVMe: Asynchronous Temperature Events will be disabled under some conditions.(SCGCQ00723600) 
  - PL NVMe: Use the Namespace List command when available(SCGCQ0072363)
  - Replace LastHeadWrite with FLUSH_WRITE (SCGCQ00726746)
  - PL: cleanup of #if INVADER	(SCGCQ00728717)
  - Print SAS Core Number for top level interrupt print	(SCGCQ00728886)    
  - Enabled the FIS porting feature and SAS exception queue handler	 (SCGCQ00729510)
  - Ventura: CSW Added Implement PLI Interrupt Handlers	(SCGCQ00733171)
  - Add IOP start queue for secondary processor	(SCGCQ00734296)
  - Cleanup Power Management Port Width Modulation indentation for maintainability(SCGCQ00734411)   
  - PL NVMe: Save off the correct version number (SCGCQ00735758)
  - N/A(SCGCQ00738664)
  - Ventura: reject backend PCIe devices that do not support MSI-x(SCGCQ00740574)
  - Ventura: PL Dual/Multiple CPU Queue Task Management Support(SCGCQ00754472)
  - Intruder FPGA: Add/Update TxDMA prints to include SAS Core Num and other useful information.(SCGCQ00755010 )   
  - Ventura: add CPU number to Reply Dest define (SCGCQ00756765)
  - Ventura: Enterprise: update headers for new EDS	(SCGCQ00756824)
  - FW Controlled Spinup: Periodic NOTIFY (ENABLE SPINUP  primitives for legacy SAS drives(SCGCQ00757326)    
  - Removed an Unused PL Feature for IOA Completion Queue Interrupt Coalescing(SCGCQ00758603)
  - Extend MFG Page 17 fields to accomodate more phys(SCGCQ00759493)
  - Ventura: Initial Cache Snooping Settings (SCGCQ00759738)
  - Ventura: Add SAS AI Slave register definitions	(SCGCQ00764299)    
					
  - Intruder: Route Non-Auto TxFM Interrupts to SAS Exception Queue	 (SCGCQ00766711 )   
  - Intruder: Allow Multiple SATA FIS Port IOs Outstanding	  (SCGCQ00768012)
  - Enterprise: check in EDS parser script	 (SCGCQ00769343)
  - Ventura: Remove initialization of mismatch frame manager  (SCGCQ00771218)
  - Ventura: Add restart capability to PCIe discovery(SCGCQ00771838)
  - pl: add macros for SATA init state change location codes(SCGCQ00773360)
  - Fix FW use of HW context offset to match actual HW context offset(SCGCQ00776435)
  - pl: AHCI: add check for 64 bit addressing support(SCGCQ00776856)    
  - Backend PCIe: enhanced diag console commands(SCGCQ00785711)
  - Backend PCIe: remove 'pl pci cap' console command(SCGCQ00786396)
  - Changes needed in FW controlled spinup of SPL-2 SAS drives(SCGCQ00787379)
  - PL: Target mode multi sas core support in pliResourceAvailable( (SCGCQ00789417  )  
  - Ventura: Raptor EDS register changes	(SCGCQ00789641)
  - Ventura: add FPGA build with backend PCIe code	(SCGCQ00790217)
  - SAS3.5 cleanup project and remove all Invader out of Intruder/Dauntless	 (SCGCQ00793562)  
  - Ventura: Modify code for compatibility with Silverhawk core	  (SCGCQ00796039)
  - Ventura: Enterprise: update Enterprise header files	(SCGCQ00799993)
  - Ventura: Distribute PL Object Modules into PLI defined archives	(SCGCQ00801716)
  - Ventura: backend PCIe: attempt some backend PCIe image size reduction (SCGCQ00803550)
  - Ventura: PCIe discovery - additional changes required to support PLX 8732+8764 RDK.(SCGCQ00805421)    
  - Ventura: Enterprise: add error tracker(SCGCQ00806134)
  - Intruder: New Config Pages for ISTWI Controller and Device Information	(SCGCQ00806204    
  - Ventura: Enable multiple SAS core support (SCGCQ00811125)
  - Backend PCIe: revisit FxCore requestor cleanup during TM(SCGCQ00812748)
  - Ventura: Enterprise: start of day memory power state configuration(SCGCQ00812875)  
  - Ventura: Update FPGA link up procedure for new CSW	(SCGCQ00813927)
  - Aladin Core: Support Fast Trace Data Collection via UART(SCGCQ00816086)
  - Ventura: Enable new PCIe discovery(SCGCQ00816096)
  - Update pl utility functions to retrieve Hardware Context pointers to be remote core compatible(SCGCQ00816272)   
  - Intruder: Update SERDES settings	 (SCGCQ00816655)
  - Use SAS Core Num of Device when accessing SASCore Device Table	(SCGCQ00816868)
  - Tiger: Update/consolidate SAS Core Hardware Initialization for Tiger support(SCGCQ00817131)
  - SAS3.5FW: update to latest MPI v2.6 header files(SCGCQ00817142)
  - Ventura DA A/R: PCIe error handling - PDB Side configurations(SCGCQ00817996)
  - Ventura: backend PCIe: some bringup changes	 (SCGCQ00818337)
  - Handling errors from pliPortEnable( (SCGCQ00818760)
  - Update SATA related code to use new plGetSasHwCtxFromDevH(  vs plGetHwContext((SCGCQ00819473)
  - Tiger: Add PL FW support to account for External SED SAS Cores during MaxSasCorenum considerations(SCGCQ00819898)  
  - Ventura: Eliminate references to capabilities structures in DM and PCI core (hardware  files(SCGCQ00820930)
  - Ventura: Create Maverick.h header that compiles	(SCGCQ00820945 )   
  - Ventura: backend PCIe: some bringup changes	(SCGCQ00821615)
  - Change usages of plGetHwContext(  over to plGetSasHwCtxFromDevH( (SCGCQ00821648)
  - Ventura DA A/R: TM Code changes related to PCIe error handling.	(SCGCQ00821974)
  - Ventura DA A/R: FxCore Interrupt/exception handling related to PCIe errors.(SCGCQ00821979)
  - Implement PCIe error recovery by handling AER interrupt generated by root port for direct attached PCIe devices.(SCGCQ00821994)
  - Convert Target mode get HW context calls to get context via core number	 (SCGCQ00822301)
  - Aladin Core: Support Status Command via UART(SCGCQ00822308)
  - Convert SAS Core Hardware touch code to get Hardware Context using SAS Core Number	(SCGCQ00822565) 
  - pl: backend PCIe: modify TM device status check timers as in device init(SCGCQ00823052 )   
  - Ventura - SED Support for POM to communicate with remote SASCores added(SCGCQ00823424 )   
  - Ventura Tiger: add enumeration support for Tiger and Tiger emulator	 (SCGCQ00823434)
  - Tiger: Update num of Phys per chip usage to account for remote SEDs - Part 1(SCGCQ00823845)  
  - Ventura: Enterprise: PIM/POM mapping bringup(SCGCQ00824588)
  - Ventura: Update Impala header file for new location of CoreInstance(SCGCQ00824728)    
  - Send periodic NOTIFY(SPINUP  to legacy SAS drive under FW control(SCGCQ00824941 )   
  - Ventura: Use consistent method for printing DevHandle and Mid(SCGCQ00825825)
  - Ventura: Set RxLosFilterEn in Guinness PUB register to allow for SATA direct attached link up(SCGCQ00825867)
  - Modify PL to used CSW2.1 initialization and register definition and set number of core to 2 by default.(SCGCQ00825881)    
  - Cleanup of PLI I/F PIM/POM struct members (SCGCQ00828947)
  - Ventura: update stang header file to latest revision(SCGCQ00829025)  
  - Ventura: backend PCIe: device space may be mapped to either POM	 (SCGCQ00829752)
  - Ventura - PLI naming tweaks for PIM/POM (part 2  (SCGCQ00830094    )
  - Ventura Tiger- Update SOD memory calculation for SASCore Completion Queues to account for remote SAScores(SCGCQ00830799) 
  - Ventura SW A/R: AER interrupt handling for Switch topology (ER   (SCGCQ00830951)
  - Ventura: Issue task management for missing PCIe devices on DMD start.(SCGCQ00832556)   
  - Marlin: backend PCIe: support additional link configurations (SCGCQ00832638)
  - Compile out Slot ordered spinup support	(SCGCQ00833374)
  - Ventura SED support - add Initialize SASCore registers for Invader Based emulator (SCGCQ00833451)  
  - Ventura: backend PCIe: some bringup changes	(SCGCQ00833580)
  - Ventura: backend PCIe: PLI address pool tweak(SCGCQ00833813)
  - Ventura DA A/R: PCIe Error handling in NVMe IO path.(SCGCQ00834583)
  - Ventura: Support Raptor R10 and R31	(SCGCQ00834846)
  - Ventura: Add PCIe discovery to IO Unit Control Force Full Discovery Request processing	(SCGCQ00835044 )   
  - PL: Check in the latest serdes settings for Intruder A0 silicon	 (SCGCQ00835410)
  - Ventura: Support dual R31 Raptor cores	 (SCGCQ00836749)
  - Ventura: update FxCore queue search during Query TMs(SCGCQ00838827)
  - Ventura: Enterprise: ShellShimObThreshold FPGA hack	(SCGCQ00839546)
  - Ventura Tiger: Setup remote cores on Ventura IOA	  (SCGCQ00841008)
  - Release notes not needed. plSim is not released during a "standard" release.(SCGCQ00843993) 
  - Ventura: SGPIO Double Pump Mode support	(SCGCQ00846941)
  - Firmware Controlled Spinup: Move Spinup Timer callback(SCGCQ00846942)
  - Ventura: Remove Dauntless PCIe discovery implementation	(SCGCQ00848347)
  - Ventura: Enhance device handle allocation to support async PCIe device addition and removal(SCGCQ00851274)   
  - Updates to Ventura for Tiger emulator support (SCGCQ00851588)
  - Ventura: Add APB SAS Slave registers to gSASCore memory map	(SCGCQ00853334)
  - Ventura Tiger emulator support changes for setting correct Port on remote SAScore phy (SCGCQ00853684)   
  - Ventura: Add the APB slave registers to the debug dump	 (SCGCQ00857054)
  - Code changes to get PCI hot reset working	 (SCGCQ00857498)
  - Ventura: backend PCIe: updated CE binary image	  (SCGCQ00858138)
  - Need spurious interrupt checks.		(SCGCQ00860268)
  - Ventura: backend PCIe: link bandwidth management notification	(SCGCQ00862039)
  - Ventura: Add support for handling AXI interrupts in SAS Core(SCGCQ00862457)
  - Increase timeout value when stopping RxCtxMgr to 2 seconds (from 10ms  on the FPGA.	 (SCGCQ00865807)
  - Ventura: backend PCIe: enable maximum PCIe device count in FPGA DDR build	(SCGCQ00865951)
  - Ventura: Use Host initiated IO Fast path flag bit to determine Frame Ownership	 (SCGCQ00866323)
  - Handle PCIe MemRd, MemWr failures issued over Enterprise POB in Axi2Shell Bridge interrupt handler (SCGCQ00866777 )   
  - Ventura: Add R33 core support	(SCGCQ00867228 )   
  - Enable PortParity Error interrupt in TxContextManager	 (SCGCQ00868992 )   
  - Add SBR header information	(SCGCQ00872116)
  - Ventura: backend PCIe: tweaks to TM and interlocks with other subsystems(SCGCQ00874057)
  - Update IOA AxUser ID to appropriate value as fixed in bitstream release 3.8	 (SCGCQ00876791)  
  - TigerStryker: Add new defines for PSB and PDB builds Part 2	 (SCGCQ00883029)
  - Implement MPI 2.6 Active Cable Exception Event		  (SCGCQ00883606)    
  - Ventura: backend PCIe: clean up some TODOs (part 2 		  (SCGCQ00884601)
  - BL: First pass of adding conditional compilation for MMU and MPU	  (SCGCQ00885620 )   
  - Remove unused SATA_SPEED_BRIDGE compile option and code	 (SCGCQ00886420)
  - Ventura: control which NVMe SGL format to use.	 (SCGCQ00886974)
  - Tiger: IOA Init	 (SCGCQ00888287)
  - Tiger/Stryker: Separate PDB code into new define - part I (SCGCQ00888868)
  - Tiger: Various tweaks to allow FPE usage on FPGA	 (SCGCQ00894300)
  - PL: Cleanup SATL code when handling commands with immediate bit set	 (SCGCQ00895181)
  - Ventura: Update NVMe header files	 (SCGCQ00897151)
  - IOP: Update PBAM offsets with Tiger/Stryker configuration	 (SCGCQ00897540)  
  - PL: Update internal structures	 (SCGCQ00898645)
  - Don't honor the DO_NOT_SEND_TASK_IU flag for Host initiated TMs for PCI devices	(SCGCQ00903582)    
  - Ventura: Implement backend sas/pci protocol control	 (SCGCQ00904596)
  - Ventura: Update firmware to the latest revision of NVMe SCSI Translation Reference(SCGCQ00905171)    
  - Ventura: Header file changes	  (SCGCQ00905237) 
  - Create PEX registers header file(SCGCQ00905526)
  - Remove Dauntless Defines: Makefiles and build scripts.	(SCGCQ00905980)  
  - Removed Dauntless platform specific code from the backend PCI PL code base	(SCGCQ00905990)
  - Ventura: Add compile option to enable/disable AHCI Support(SCGCQ00908659)
  - Allow Unique SAS address for Direct Attached Sata Devices  (SCGCQ00908795)
  - Tiger/Stryker: CSR Handler (Cfg Read and Writes  (SCGCQ00910623)
  - Ventura: Make Some Fault Codes Unique	(SCGCQ00910652)
  - Ventura: Use CSW library to load nvdata phy parameters(SCGCQ00910735)
  - Ventura: backend PCIe: remove stale early FPGA hacks	 (SCGCQ00911513)  
  - Ventura B0: backend PCIe: changes for IOA stall prevention	 (SCGCQ00914682)
  - PL: Set the number of SAScores correctly  (SCGCQ00915868)
  - Disable PL_FEATURE_SED_SUPPORT(SCGCQ00915981)
  - Tiger/Stryker: PSB initialization(SCGCQ00918247)
  - Tiger/Stryker: MCPU Enumeration and Configuration of PEX ports and attached devices.(SCGCQ00918258) 
  - Ventura: Map WidePort activity group to GPIO pins	 (SCGCQ00919252)
  - Ventura: Remove SAS core SGPIO module support code	(SCGCQ00919473)
  - Ventura A0: Add support for B0 HW CR46 - PBAM InFrame activity mapping logic changes for PDB and SAS cores	(SCGCQ00919497)
  - Ventura: Add support for PCIe Port link status GPIO LED (SCGCQ00922878)
  - Ventura: Internal compiler option cleanup (SCGCQ00922908)
  - Update Ventura PL code for MPI/SED device enumeration (SCGCQ00924378 )   
  - Ventura: backend PCIe: link down handling tweaks  (SCGCQ00925766)
  - Ventura: backend PCIe: allow usage of 64 bit space for device BARs	(SCGCQ00926634) 
  - Add display of Serdes version info(SCGCQ00926684)
  - Ventura: PCIe error handling tweaks for SHEX stall conditions(SCGCQ00927522)
  - Ventura: Ensure uniqueness of PCI Bus Numbers for devices in the backend PCIe topology	 (SCGCQ00927968)
  - Ventura: backend PCIe: add support for not faulting on resource setup failure(SCGCQ00928542)
  - Ventura: backend PCIe: resolve "use MPI defined shift" TODOs  (SCGCQ00928552)
  - Ventura: Update Inquiry results for NVMe drives to be compliant with version 1.5 of the NVMe SCSI Translation Reference (SCGCQ00928876) 
  - Tiger: Remove PCI_PSB from build and use IOP/PL defines	(SCGCQ00932472)
  - Ventura: Update FxCore queue flag struct in the header file to match latest EDS	 (SCGCQ00934751)
  - Active cable Power management support for Intruder/Cutlass (SCGCQ00935460) 
  - Ventura: Update some PL prints to use the Program Counter(SCGCQ00936716)
  - PL: Remove old remote SED Driver code from PL(SCGCQ00937808)
  - Remove leftover Dauntless code from SAS 3.5 firmware codebase(SCGCQ00938267)
  - PL: Remove remote SAS core management(SCGCQ00938440)
  - Ventura/Marlin: backend PCIe: resolve some TODOs(SCGCQ00938516)
  - PL: Add support framework for received MPI events from downstream devices	(SCGCQ00938560 )   
  - Ventura: backend PCIe: add runtime control of PDB hardware workarounds	  (SCGCQ00938856)
  - Turn on satapmlastspeed bit in HW(SCGCQ00939406)
  - Tiger: Update SIL on POM access.(SCGCQ00939588)
  - Tiger: Add Pex HW related uart commands	 (SCGCQ00940378)
  - Ventura: backend PCIe: store NVMe init permanent failure reason	  (SCGCQ00941043)  
  - PL: Remove unnecessary bit from device data structure (SCGCQ00941747)
  - PL: Clean up SATA only fields in device information structure	 (SCGCQ00943357)
  - Create separate header file for Tiger CCR register definitions	(SCGCQ00944146)
  - IOP: Implement the macros for enabling/disabling config space for Tiger	 (SCGCQ00944747)
  - Tiger: get PCI_DEVICE=0 build working	(SCGCQ00945790)
  - Tiger: add support to disable Tiger PCI Backend enumeration(SCGCQ00947178)
  - Ventura: SE version of seri interface functions	(SCGCQ00947213)
  - Ventura: backend PCIe: configure some link speed related settings in the DM Core  (SCGCQ00947271)
  - Ventura: Use CCR data to set number of SAS cores(SCGCQ00949076)
  - Ventura: backend PCIe: A0 bringup changes (SCGCQ00950032)
  - Ventura: Set Tx Phase in CSW(SCGCQ00951098)
  - PL: Make SED attached SATA drives appear as a SAS drive	(SCGCQ00952485)
  - Ventura: Add all ASC/ASCQ's to scsi.h(SCGCQ00952486)
  - PL: Ventura-Tiger: Set Additional FPE Hardware Flags for SED Attached Devices(SCGCQ00953368)
					
  - PL: Add awareness for Avago's Cub expander (SCGCQ00954684)
  - Tiger PL: Internal PCIe switch should be masked from host(SCGCQ00964651)
  - Tiger: Handle POM errors(SCGCQ00964901)
  - Tiger: Implement DPC support(SCGCQ00965091)
  - Ventura: Add code to prevent PDB access if PDB PLL not locked(SCGCQ00966067) 
  - Ventura: backend PCIe: decrease verbosity of IEEE SGL to PRP translation debug prints (SCGCQ00968712)
  - IOP Logic for updating the NVDATA Flags to indicate Current Active Cable Power Exception.  (SCGCQ00981722)  
  - Ventura: Update IOA/FxCore register settings to the HW recommended values (SCGCQ00982700)
  - Tiger: integrate using combo serdes wrapper library for SERDES init	 (SCGCQ00987114)
  - Tiger: Add performance monitor support. (SCGCQ00987214)
  - Tiger: Multiple host support for CSR (SCGCQ00988657)
  - PL: Add interrupt handling for downstream MPI devices(SCGCQ00991252)
  - Tiger: Initial Veloce updates for Firmware	 (SCGCQ00991777)
  - Tiger: Implement PCIe Capability Structure for the upstream management port	  (SCGCQ00995103)    
  - Ventura: Enable DMA masking feature	(SCGCQ00995327)
  - PL: MPI device initialization and interrupt fixes (SCGCQ00996181)
  - Ventura: Configure the PLLs on SBus ring (SCGCQ00999504)
  - Ventura PL: Must return SCSI IO Errors from SED via correct code path(SCGCQ01002447)
  - Tiger: Implement firmware controlled PCIe message transmission on downstream ports.	 (SCGCQ01002884)
  - Tiger: Implement firmware controlled PCIe memory TLP transmission on downstream ports.(SCGCQ01002890)
  - PL: MPI Driver needs to use Atomic Request descriptors if available  (SCGCQ01003767)
  - PL: Add MPI Device information to pl pci prot CLI command(SCGCQ01004358)
  - PL: Force 128 byte payload size when supporting Tiger FPGA	(SCGCQ01004360)    
  - PL: Support MPI SED attached expanders	(SCGCQ01009315)
  - PL: Use message frames as reply frames for MPI driver	(SCGCQ01010464)
  - Tiger Ventura: Store secondary SED MPT endpoint in upper half of MPI device array and populate FPE device state table for remote drives	(SCGCQ01010549    
  - Tiger: Intial setup of Messaging Unit Hardware to operate in Tiger mode	(SCGCQ01011139)
  - Tiger: Add SED Init message	 (SCGCQ01012121)
  - Updated debug print for RxCtxMgr interrupts to deal with newly defined interrupts.	 (SCGCQ01012491)  
  - Tiger Ventura: handle IO replies from MPI device for IOs not started by FW path	 (SCGCQ01012812)
  - PL: Add code to support more than one reply queue for MPI SED (SCGCQ01013664)
  - Ventura PL: Improve support for PCIe Topology Change List events from SED(SCGCQ01014644)
  - Tiger: Ventura side Completion Q flusshing forTM handling for Tiger attach devices	  (SCGCQ01014796) 
  - PL: Remove pointer to hardware not present in Tiger	(SCGCQ01015022)
  - Ventura PL: Provide SED with DDR information from IOC	(SCGCQ01015368)
  - Ventura A0: Modify the current Tx DMA stop and clean method per HW suggestion	 (SCGCQ01015801)
  - PL: Ventura: Set up SED attached devices for dual path	 (SCGCQ01018560)
  - Tiger Ventura - if Tiger or Ventura fault, ensure the other side is faulted as well. (SCGCQ01019232 )   
  - Ventura/Marlin: backend PCIe: Link number field in PCIe Link Page 3	SCGCQ01019238)    
  - Ventura PL: Patch up IO count for IOs to SED attached devices (SCGCQ01019623)
  - Ventura PL: Improve pl pci prot CLI command for MPI SEDs	  (SCGCQ01019746)
  - Ventura PL: Organize MPI SED initialization routines into their own file	(SCGCQ01020470)
  - Ventura: Enable Active cable Management support	 (SCGCQ01021229)
  - Ventura: backend PCIe: preliminary support for specific vendor SRIS NVMe devices(SCGCQ01021633)
  - Tiger PL SED: Initial Handling of Task Managements to an SED attached end device(SCGCQ01023127)
  - Tiger FPGA: Implement Abort Task Set, LUN Reset and Clear Task Set to SED attached End devices	(SCGCQ01024838) 
  - Aero: Add support for Clang (ARM V8  Compiler Build	 (SCGCQ01025199)
  - Ventura PL: Add support for PCIe Device Status Change Event	(SCGCQ01026209)
  - Ventura Tiger: (PL  Add support to report IO counters for IOs started to remote cores (SCGCQ01026333  )  
  - Ventura Tiger: Implement internal Target Reset Task Management	(SCGCQ01027918)
  - Ventura PL: Configure MPI SED Driver to use different sized queues	(SCGCQ01028106)
  - Ventura: backend PCIe: count occurrences of some events for link quality debug	(SCGCQ01028168)
  - Tiger: remove IOcount inc/dec function prints by default (SCGCQ01028249)
  - Ventura Tiger: Report Tiger attached SATA devices as SATA devices in Ventura.(SCGCQ01031015)
  - Tiger: Create SED product specific files(SCGCQ01031950)
  - PL: Present SED attached NVMe drives as NVMe drives (SCGCQ01032861)  
  - PL: Combine SAS/SATA and PCIe DeviceType fields	 (SCGCQ01033353)
  - PL: Combine SAS/SATA and PCIe Parent device fields	 (SCGCQ01033578)
  - Support for fetching LBA from NVMe Drives in case of medium error.(SCGCQ01033882)
  - Tiger: Enable FW NonAuto RX HW auto drop of frames	(SCGCQ01034335)
  - Replace Core # and Subsystem in TM Start print with TM MsgFlags value(SCGCQ01035100)
  - Ventura: Enable TestMux captures on SAS core 1(SCGCQ01035102)
  - PL: Add configuration page handling for SED attached PCIe devices(SCGCQ01035127)
  - Ventura PL: Convert Expander and Switch DevHandles in Topology Change List Events	(SCGCQ01035243) 
  - PL: SAS Enclosure Add event must be sent prior to PCIe Topology Change List event(SCGCQ01035618)
  - Ventura PL: Force SED attached NVMe drives to look like SAS drives in IOA(SCGCQ01035852)
  - PL: Add internal debug commands	(SCGCQ01037236)
  - Ventura: backend PCIe: changes for use of new SERDES firmware image(SCGCQ01038439)
  - Ventura PL: Add initial support for SED removal(SCGCQ01039070)
  - Ventura Tiger: Add support for TMs to SED attached NVMe end devices.(SCGCQ01040085) 
  - Ventura: Add sris setting in CSW(SCGCQ01044034)
  - PL: Handle SED going missing from the PCIe topology	(SCGCQ01044041)
  - Ventura Corrective Actions for Board Over Temperature Conditions (SCGCQ01044068)
  - PL: Configure PCIe switch BARs	  (SCGCQ01049391)
  - Tiger: remove R35 SAScore support(SCGCQ01049417)
  - Tiger: Add R42 ECO 0x01 sascore version	(SCGCQ01057706)
  - PL: Add support for memory translation in SAS Core	(SCGCQ01058395)    
  - Ventura: Add device side SPICO FW version to pliShowVersion((SCGCQ01062566)    
  - Tiger: Get Tiger to compile with PL_FEATURE_CSW_LIB enabled	(SCGCQ01063627)    
  - PL: Support Translation of Additional Log Pages	 (SCGCQ01067698)
  - Tiger Ventura: Don't dump SED message MIDs in pl mids (SCGCQ01071138)
  - SCSI over PCIe (SOP  Feature Removal(SCGCQ01071351)
  - Ventura PL (Tiger : Reorganize PCIe Topology Change List Event handling	(SCGCQ01073806)
  - PL: Improve MPI Message Print to include MID and correct PCI LinkRate conversion macro	 (SCGCQ01073878)  
  - Tiger A0: PCIe Link Configuration Setup	 (SCGCQ01076376)
  - Add new seri functions to interface with CSW library (SCGCQ01076389)
  - Ventura PL: Firmware should identify which path is connected and only initialize the primary path  (SCGCQ01080031)    
  - Makefile cleanup for SCSI over PCIe (SOP  Feature Removal (SCGCQ01080155)
  - Ventura/Marlin: backend PCIe: allow FxCore FPE completion queue to be placed in IOA Local RAM(SCGCQ01081056)
  - Ventura B0 default DMA Q masking settings	 (SCGCQ01082715)
  - Add debug information to ring buffer when PLLs fail to lock		(SCGCQ01083258)
  - Ventura: Move GPIO LED Data Mux source selection configuration from IOP to PL	(SCGCQ01083822)
  - Enabled Accelerator Coherency Port (SCGCQ01086077)
  - Tiger: Implement A PCIe Backend Function to Check if the Root Complex is Enabled(SCGCQ01087447) 
  - Ventura PL: MPI Numbers must be allocated per the configuration parameters(SCGCQ01087579)
  - Update Tx EQ settings to recommended default values	 (SCGCQ01088723)
  - PL: Get Encapsulated NVME I/O to work from Ventura to Tiger(SCGCQ01088802)  
  - PL: Add inline function for setting device manager bit  (SCGCQ01090086)
  - Ventura PL: Add support for SED specific resource mapping and mapping information retrieval		 (SCGCQ01091608 )   
  - Aero: modifications to compiler optimizations (SCGCQ01092420)
  - Aero: changes to get PL to compile with clang	  (SCGCQ01094536)
  - Ventura PL: Improve SED Config Page requests to allow for large pages (SCGCQ01095058)
  - PL: Hardware automated DATA FIS(s  DMA for SMR ReportZone SATL for faster proccessing (SCGCQ01107729)  
  - Ventura/Marlin: backend PCIe: use alternate means of generating mem space accesses (SCGCQ01108244)
  - pl: NVMe: when checking for device idle or ready, check once only per call(SCGCQ01110208)
  - Ventura/Marlin: backend PCIe: rearrange PDB medium priority interrupt handlers	(SCGCQ01110330)
  - Ventura/Marlin: backend PCIe: add multiple structure support to a PL internal search function(SCGCQ01110340)  
  - Ventura: Add B0 Pl recognition	  (SCGCQ01112241)
  - Ventura/Marlin: backend PCIe: update to latest compute engine binary image (SCGCQ01116715)    
  - Aero: create aero base address map	 (SCGCQ01123955)
  - Ventura: add Link field to the PCIe Link configuration pages (part 1  (SCGCQ01124182)    
  - Ventura: Add FxCore Exceptions Count to pl stats command(SCGCQ01124245)
  - Ventura: add FPE CPU1 performance counters to "pl fpe stats"(SCGCQ01124430) 
  - Ventura: Update Timer Adj 1 register for optical	  (SCGCQ01127529  )  
  - Ventura/Marlin: backend PCIe: support for SRIS enable in PCIe IO Unit page 1 phy data (SCGCQ01130582) 
  - Ventura: Report PCIe init status in IOC Exceptions	SCGCQ01130590)
  - PL: Added new debugging support	  (SCGCQ01132375)
  - PL: backend PCIe: always print LBA for NVMe read/write breakup IOs (SCGCQ01140426)
  - Ventura: Update MST with current MST info on timer error completions to IOP	  (SCGCQ01141751 )   
  - pl: NVMe: additional encapsulated request error reporting	 (SCGCQ01150880)
  - Ventura B0: backend PCIe: enable NVMe completion starvation prevention (SCGCQ01169187) 
  - Ventura/Marlin: backend PCIe: handle switch attached hot add max payload size mismatch	(SCGCQ01172361)
  - Implement TM history logger	 (SCGCQ01173976)
  - Addition of two events to Active Cable Exception Event Data. (SCGCQ01181278)
  - PL Sim: Update to compile  (SCGCQ01181402)
  - PL: Initialize LED Data Select Register	 (SCGCQ01183299)
  - PL: Additional debugging information	(SCGCQ01190215)
  - Reduce the number of Target Resets started when a missing device returns  (SCGCQ01205601 )   
  - Support VPP backplane LED management for NVMe x4 device Slots (SCGCQ01206050)
  - Ventura/Marlin: backend PCIe: allow user to disable ECRC for testing (SCGCQ01209929)
  - NVDATA is now required to match SBR PCE IDs, or MR card will assert	  (SCGCQ01214162)
  - Ventura: Print decimal versions	(SCGCQ01217493)
  - Marlin: backend PCIe: bringup changes for Marlin B0	(SCGCQ01232332)
  - Ventura/Marlin: backend PCIe: enable PCIe extended tags	(SCGCQ01254735)
  - Ventura/Marlin: allow IOP to direct PL to not allocate secondary CPU queues	(SCGCQ01263302)
  - Ventura/Marlin: backend PCIe: aggressively retry unreliable DA links during discovery  (SCGCQ01264003 )   
  - Support added for hot swap of NVMe drives(SCGCQ01264585)
  - Ventura: Updated Marlin B0 SATA Rx EQ Values	 (SCGCQ01269428)
  - Converted SMP Start debug print to standard Dev:MID format	(SCGCQ01270121)
  - Ventura/Marlin: backend PCIe: SRNS	 (SCGCQ01273153)
  - If the profile type is not supported on a downloaded image, the image will not get flashed.	 (SCGCQ01277489 )   
  - SCONS: Add Doxygen builder(SCGCQ01282782) 
  - Add source utilities	(SCGCQ01287449)
  - Add debug string builders	(SCGCQ01288927)
  - Add "Incompatible with Profile" event(SCGCQ01289924)
  - Enumeration of drives in certain OEM platform	 (SCGCQ01291036)
  - Add via file source utilities	(SCGCQ01291806)
  - Unified implementation of init buffer by dynamic allocation for SAS/NVMe mixed mode support	 (SCGCQ01299270)  
  - Core 1 uses Core 0 for nvram/flash access in TTY.(SCGCQ01302263)
  - Add display of CSW library version to debug output	(SCGCQ01306722)
  - VMware pass-through controller - No Time Sync after VM with PCIe device starts	(SCGCQ01307584)
  - Firmware returns only firmware supported profile id data for Host Appl Get Profile command	(SCGCQ01310346 )   
  - Enumerate GPIOs based on CCR  (SCGCQ01319860)
  - Setting up CPLD GPIO pins for CPLD online Update on Perc10 Controllers(SCGCQ01334575)
  - Support merging of multilple define sections from multiple yaml files.	 (SCGCQ01351246)
	(SCGCQ01354358    Opened))
  - Undo mon.c version number change introduced by SCGCQ01367090. (SCGCQ01367198)
  - Store the RAID SubDevID in NVRAM to have a reference to original RAID-ID - NVRAM changes (SCGCQ01388735 )   
	(SCGCQ01389581)
  - Improve Scons error handling (SCGCQ01390029)
  - Integrate phase-4 PL library 04.25.01.00 (SCGCQ01391584)
  -Older FW without NVME passthru support) breaks with NVME passthru capable components(SCGCQ01406091 )    
  - Add support for fan-out topology enumeration  (SCGCQ01423739)
  - Integrate MR PL-SCS Libs: SASFW_Ventura_Phase_5.0 04.250.09.00	 (SCGCQ01425554)
  - Enable PI on OEM controller (SCGCQ01445084)
  - PL: Add Code to Correctly Determine Mid for Rx Context Non-automated Interrupts	(SCGCQ01472512)
  - Look into Qfull handling (SCGCQ00081065)
  - Gen3: TLR	(SCGCQ00090039)
  - Update firmware to correctly dump all SAS Core registers	(SCGCQ00090999)
  - Diagnostic support updates for Colt  (SCGCQ00095010)
  - Need a mechanism to cover up IO failures due to discovery lag in PL	 (SCGCQ00100078)
  - [Internal Use Only] Control of Loopback mode through the UART	 (SCGCQ00126580)
  - pl: Power condition support in SATL - mode page 0x1A	 (SCGCQ00131186)
  - Update the Quiesce IO/TM/SMP code for gen3 generic availability	 (SCGCQ00131981)
					)
  - Thunderbolt: The B0 revision handles the SAS clock setup differently.  (SCGCQ00132812) 
  - Gen3 PwrMgmt: Add IOP & PL infrastructure for chip-wide power management modes	 (SCGCQ00136946)
  - TxDMA error handling update for NonAuto Bit implementation	 (SCGCQ00141867)
  - EDFB: watch for IT Link Layer IntStatus1 UnknownAddrFrameStat bit (SCGCQ00142858)
  - Allow smp to work for invader(SCGCQ00143184)
  - add ring buffer prints to EDFB code to assist with dev test	 (SCGCQ00144233)    
  - Write the magic keys to enable Detroit register access (SCGCQ00144420)
  - add the actually enable/disable calls to the PLI device/all enable/disable cotnrol request handlers		 (SCGCQ00145469)  
  - change FPE exception INVALIDE_DESCRIPTOR handling from doing an  reply to just handing off to IOP	  (SCGCQ00146110)    
  - FPE - Detroit EDS 1.1 Impacts on Fast Path firmware	 (SCGCQ00146766)
  - TBM: Host posted Extended Buffer has to be 16KB aligned	(SCGCQ00149045)
  - basic register updates for Colt EDS 1.21	 (SCGCQ00149149)
  - need to set bit 22 of RxFrm Config reg to 0	 (SCGCQ00149246)
  - pl: Enable a couple new interrupts in RxCM	(SCGCQ00150044)
  - PL: Fix prints in RxCM as the number of interrupts has grown and won't fit nicely into the current print (SCGCQ00150052)  
  - FPE: need to add an additional flags parameter to pliStartScsIO(SCGCQ00151001)
  - SAS-3 Add Pl Diagnostic Commands to Set FPE Continue Bits	  (SCGCQ00153609)
  - Disable SingleContextMode.	(SCGCQ00154829)
  - Add uart command to send an abort task to an outstanding io to a specific device(SCGCQ00155180)
  - Implement Extended Manufacturing Page 40 and 41. These two pages replace mfg page 3.(SCGCQ00155477) 
  - Add RxEEDP handling for Non Automated IO cases	(SCGCQ00155573)
  - FPE: update detroithw.h to Detroit EDS v 1.32	(SCGCQ00157011)
  - Add handling for TxCtxMgr non auto interrupt for sata devices.(SCGCQ00159013) 
  - Obsolete Man Page 15(SCGCQ00159985)
  - Update the register definitions as per Colt EDS 1.3	(SCGCQ00160461)
  - Implement functional section changes as per Colt EDS 1.3.(SCGCQ00160464)
  - CSET: Fixing debug string issues - (SCGCQ00156731  ADDITIONS (SCGCQ00160874)  
  - Round 2: remove more gen2 workaroudns that aren't enabled  (SCGCQ00162068)
  - Add a print for the Fault 0x5002 case(SCGCQ00162601)
  - TBM: Set TraceType for devices from host(SCGCQ00162901 )   
  - Round 4: gen2 HW WA removal	(SCGCQ00163955)
  - Cleanup plScsiIo.c	SCGCQ00165973)
  - Task Management Complete code cleanup(SCGCQ00166006)
  - pl: Remove unnecessary workaround code	 (SCGCQ00166702)
  - Add PLI control request to specify power management modes for Cuda fast path engine. (SCGCQ00167819 )   
  - Round 5 of gen2 WA removal(SCGCQ00168602)
  - TM: Update TM code to use macros for all accesses to hw context area. (SCGCQ00171264)
  - Don't set ArbMode[2] bit for spinupconfig (SCGCQ00174793)
  - FW needs to set some bits in TxFM at init/SOD to help with performance - BT700	 (SCGCQ00177397 )   
  - HW WA for BT COSEDA 790 - setup starfish regs as the HW defaults are incorrect  (SCGCQ00179616) 
  - Remove [SAS2Core] 1656(SCGCQ00180309)
  - FPE: disable FPE Timer when faulting (SCGCQ00181784)
  - Handle new RxCtxManager interrupt in B0	(SCGCQ00183299)    
  - Bring plSasCoreCleanup.c up to coding standards	(SCGCQ00185717)
  - comment out some code that's causing problem because of the known hw bugs	(SCGCQ00186491)
  - define another serdes register	(SCGCQ00187398)
  - Gen3 PwrMgmt: Wide Port Power Management to support 'Communicated Intent Modulation Scheme'	  (SCGCQ00188249)
  - Update TM to utilizie B0 RxFM change that will force HW to look at ForceIOPath bit in Hw Context vs cache (BT SASCore 713  (SCGCQ00193703 )   
  - Make SMP requests high priority and ensure they don't get queued behind other contexts(SCGCQ00200476)    
  - Invader A0: Add CLI command to dump complete Cuda's MST and DST regs(SCGCQ00201734)
  - Invader B0: BT [invader] 895 - f/w WA removal and changes to accomodate RTL fix	(SCGCQ00203339)
  - Gen3: MPI PowerManagementControl request msg parameters need to verified before processing.	(SCGCQ00203386)
  - Add a register definition(SCGCQ00203389)
  - Support to handle Unconfirmed Responses reported by SAS HW	 (SCGCQ00205974)
  - Dif Memory Threshold need to be initialized to a different value.(SCGCQ00207198)  
  - Need a mechanism to enable snoop regions in SAS	 (SCGCQ00210177)
  - Gen3: Update the Colt Revision Numbers	(SCGCQ00213007)
  - Invader A0: BT [invader] 1279 - Firmware workaround	 (SCGCQ00213444) 
  - Invader PLB snoop region configuration	(SCGCQ00215430)  
  - Cleanup task management start function and keep all hw cleanup in one spot (SCGCQ002184560)    
  - Gen3 : SAS core parity bit checking	 (SCGCQ00218757)
  - check in new serdes settings (2.14 	 (SCGCQ00218813)
  - Set default value of PL_SATA_DATA_BLK_RES to 0xD	(SCGCQ00219445)
  - Change the default value of the TimerCount register in RxFM to 0x1FFFF	 (SCGCQ00219981)
  - Invader Performance Improvements (Part 1  (SCGCQ00221359)
  - Update TxFM cleanup code for gen3(SCGCQ00224494)    
  - Update TM Tracker counters	(SCGCQ00225192)
  - Update hardware cleanup code to flush colt register writes when needed	  (SCGCQ00226955)
  - Starfish register update so that Invader-Cobra link up at 12G reliably	  (SCGCQ00233702)
  - Update the serdes register again to allow invader-cobra to link up at 12G reliably	(SCGCQ00234909)
  - Investigate if not setting up MsgUnitOffsets in FPE (the PLI params pass 0  works and/or if any changes are need to enable it	(SCGCQ00242893 )   
  - Active Cable Management: handle I2C errors	 (SCGCQ00245966)
  - Put code for BT 1486 in WA define(SCGCQ00246445)
  - Increase trace buffer entry timeout and add more debug on the D204 fault.(SCGCQ00247199)
  - Invader A0: (Hw Workaround  RxDma in target Mode (with AutoStatus=0  Clearing MidValid before FinalEEDP frame (SCGCQ00257902)  
  - Update B0 WA matrix for all fixed FPE issues (SCGCQ00261863)
  - Serdes settings to help with back channel training	SCGCQ00304268)   
  - Target Mode Performance Optimizations	 (SCGCQ00304799) 
  - Added B1 SAScore Recognition	(SCGCQ00312649)
  - SCSI to NVMe dataset management translations	 (SCGCQ00341219)
  - Need initializtion of message table resources for IOA changes	(SCGCQ00348165)
  - (IOP  Add option for tail printing of Ring Bufffer and Trace Buffer(SCGCQ00356717)   
  - SATA FIS Porting feature support(SCGCQ00357509)
  - SAS Gen3.5 FW Spinup Control Implementation	 (SCGCQ00360815)
  - [Dauntless]: SGL Translation - IEEE-64 to SOP/PQI (SCGCQ00362773)    
  - Added new internal tool, no change to FW(SCGCQ00362950)
  - (STANG  Add support for new parity an other faults	(SCGCQ00364223)
  - Added support for async removal and insertion for PCIe devices.	(SCGCQ00377853 )   
  - Added support for new SAS core versions	(SCGCQ00379298)
  - Added support for handling new Stang exceptions	  (SCGCQ00379989) 
  - pl: pci: DevHandle allocation for PCI switches	(SCGCQ00380149)
  - (IOA  Add compute engine initialization debug capability(SCGCQ00381819 )   
  - This week's NVMe related changes(SCGCQ00383672)
  - FW Read/Write IO Path base functionality(SCGCQ00400466)
  - FW Read/Write IO Path - Additional PCI protocol Helper functions (SCGCQ00400473) 
  - Use generic IO context structure throughout the NVMe code (SCGCQ00400554)
  - Added support to detect invalid AHCI PRDT (SCGCQ00401374)
  - Added code to support new high order bits register for scripts physical addresses(SCGCQ00406167)
  - (IOP  Add dump of CE Script Version (number and date  to the IOP SHOW VER command  (SCGCQ00412128)  
  - Use new fastpath express hardware when possible	  (SCGCQ00414087)
  - (PL-TBM  Change the Trace Buffer Manager so that faults are decoded better	 (SCGCQ00415382)    
  - SAS Gen3.5 Additional PCI Encapsulated MPI Message Support(SCGCQ00418649)    
  - Firmware Support for NVMe encapsulated MPI message	 (SCGCQ00420063)
  - Add base PCIe Task Management and AHCI device Task Management support (SCGCQ00420317)
  - Added support for translating PLB/DDR addresses in simple SGEs for AHCI devices	 (SCGCQ00420512) 
  - (PL  Add additional checks to FPGA to avoid invalid defects(SCGCQ00420887)
  - NVMe: Add PLB-NTA check to IEEE SGL translation code	  (SCGCQ00420919)
  - Added code to reject firmware translation of chain to AHCI PRDT format	  (SCGCQ00421777)  
  - Add ALADIN tracing support in PL  (SCGCQ00423378)
  - (IOA  Add code to activate Dynamometer and StopOnDMA features in Dauntless(SCGCQ00425000)    
  - PCIe IO Unit Page 1 NVMe Max Queue Depth  (SCGCQ00432741)
  - MPI 2.6 Rev. B Feature: Move all SAS IO Unit Page 4 Spinup Control and PortEnable functionality to IO Unit Page 11.	 (SCGCQ00433597)    
  - Need better way to set up PDB POMs	(SCGCQ00436942)
  - Add Stang Exception error handling for SOP	 (SCGCQ00441252)
  - Update PQI to latest revision  (SCGCQ00442263)
  - Implementation of SATL handling while the SATA drive is in security 'frozen' state(SCGCQ00443282)
  - Added PCIe IO Unit Page 4.(SCGCQ00443286)
  - Add support for emulated NVME target device using Thunderbolt controller(SCGCQ00449055)
  - Handle PCIe Fx-FPE completion queue wrapping while manually adding TM entries. (SCGCQ00449817)
  - NVMe: Start device initialization earlier (SCGCQ00449822)
  - New IOP Interface to allow mapping of larger memory resources (>1G  to backend pci space(SCGCQ00455575)    
  - Additional NVMe init error handling	(SCGCQ00457350)
  - AHCI: Add handlers for IO and port errors (SCGCQ00459853)
  - AHCI: SGL translation for SATA passthrough commands	(SCGCQ00466204)
  - Ventura: Populate Slot information for PCIe devices	 (SCGCQ00468835)
  - Modify SOP SGL translation to handle skipcount before checking DLAS	 (SCGCQ00476181)
  - Create and use generic PCI and PCI Express headers	 (SCGCQ00477114)
  - Debug command for dumping Stang queues (SCGCQ00480032)
  - Ventura: NVMe 1.1 SGL Support(SCGCQ00481258)
  - Allow TxDMA dual-context capability during non-FCS connection	  (SCGCQ00495917)
  - Changed a variable name that was too similar to another variable to prevent confusion and misuse of the variables (SCGCQ00504528)  
   Implement support for PCI device queues and other structures to be placed in user defined memory(SCGCQ00521487 )
  - Ventura: Update CCR Register Definitions(SCGCQ00521691)
  - Ventura: IOA – Impala IO Accelerator Cuda Trace Buffer Manager Block Bring Up(SCGCQ00522532) 
  - Ventura: IoCount changes for backend PCIe devices(SCGCQ00527858)
  - Enterprise: header file	(SCGCQ00552408)
  - Ventura: Enterprise: toplevel interrupt handler	(SCGCQ00552429)    
  - Enterprise: backend device interrupt configuration and handling	 (SCGCQ00552447  )  
  - Enterprise: root complex changes, part 1 (SCGCQ00552480)
  - Port SPI library build to ARM(SCGCQ00570147)
  - NVMe: a couple of mode page tweaks	  (SCGCQ00572583)
  - Create initial build of IOP for ARM	 (SCGCQ00577404)
  - Added code for safe back end PCIe memory reads(SCGCQ00603243)
  - PL: infrastructure for supporting multiple SAS cores(SCGCQ00603478 )   
  - PL: Determine the number of SAS Cores present(SCGCQ00603493)
  - add Intruder FPGA build	(SCGCQ00604632)
  - Ventura: POC7 Map Update(SCGCQ00606237)
  - SATL: Changes to SCSI Format Unit translation (SCGCQ00606271)
  - PL: Update SATA device support in PL for direct-attach drives to account for multiple SAS cores	 (SCGCQ00606873 )   
  - Updating IO path to take multiple SAS core into account (SCGCQ00607970)
  - Allow for separate Ventura and Intruder versions(SCGCQ00610916)
  - Ventura: SAS Initiate Close support (SCGCQ00612661)
  - Ventura: DMA Queue Masking support	(SCGCQ00612672)
  - PL: Implement newly added SAS request counters in IOA (SCGCQ00624070)
  - Removed gplPciDeviceDma	(SCGCQ00628093)
  - Enterprise: allocate memory at SOD for generic message data queue  (SCGCQ00629194)
  - Extend PL to handle link interrupts on multiple SAS cores (SCGCQ00630405)
  - Extend PL to handle queue manager interrupts on multiple SAS cores	(SCGCQ00630407)
  - PL: Extend PL to handle Rx interrupts on multiple SAS cores	(SCGCQ00630414)
  - Extend SAS config register and SAS slave interrupt handlers in PL for multiple SAS cores(SCGCQ00630415) 
  - PL: Convert gplInterruptTracker into an array to track interrupts on multiple SAS Cores (SCGCQ00630416)
  - Updated IOP interrupt handler function to handle multiple SAS Cores.(SCGCQ00632495)
  - Modified AHCI initialization to use new safe accessor functions for PCIe read/write	 (SCGCQ00639096)
  - NVMe: several SCSI-NVMe related changes(SCGCQ00642831)
  - UTILITY: Add memcfg utility for ARM products(SCGCQ00642860)
  - Support both SAS cores using same StarFish instance on FPGA	 (SCGCQ00644337)
  - Update link reset state machine to handle multiple SAS cores(SCGCQ00645143)
  - Ventura: POC8C Bringup	(SCGCQ00646636)
  - Update Open Reject Phy Hopping workaround to indicate it's fixed in parts beyond Invader C0  (SCGCQ00648223)  
  - Ventura: Replace gDetroitCore with gIoaCore(SCGCQ00652323)
  - Update plGetNumberOfSasCores(  on Intruder FPGA (SCGCQ00654341)
  - Updates for FPGA phase 0.3	(SCGCQ00654885)
  - Ventura: Update to latest Impala EDS and more Initialization changes(SCGCQ00657743) 
  - Intruder: Remap SASCORE1 in virtual address space with no overlap (SCGCQ00660501)
					
  - Removed unneed HW WAs that were only for Invader A0/B0 parts(SCGCQ00661628) 
  - Make SasCore Number the first argument	 (SCGCQ00664318)
  - Add Intruder Specific Define for Number of SGPIO Instances	 (SCGCQ00664340)
  - Ventura: Map remaining cores as described in the original Ventura map up to POC10 (SCGCQ00667112  )  
  - Enterprise: PDB MSI/MSI-x handler compatible with Enterprise(SCGCQ00669530)
  - Update STALL_NEW_FRAMES WA in plTimerCallback to work with multiple SAS cores	 (SCGCQ00669870) 
  - Handle Power loss interrupt for NVMe devices (SCGCQ00672240)
  - Modify Tx FM Cleanup code for dual SAS core support	 (SCGCQ00672803)
  - Update plRxDmaEngineReset to support multiple SAS cores	(SCGCQ00672915)
  - Modify functions that call plRequestFWBreak to pass the chip link number as the argument (SCGCQ00673022)  
  - PL: Port Width Modulation Algorithm (Power Mgt  to account for multiple SAS core  (SCGCQ00673054)
  - Use Quad related macros in code	 (SCGCQ00673111)
  - Intruder: Firmware Dual context settings cleanup and setting dequeuing modes. (SCGCQ00674213)  
  - Intruder: Adapt plTxTransportCleanup(  for Multiple SAS Cores(SCGCQ00675483)
  - Update Rx Transport cleanup code to account for Multiple SAS Cores	 (SCGCQ00675651)
  - Backend PCI: generate Set Slot Power Limit message	  (SCGCQ00676417)
  - Intruder: cleanup plRxCtxMgr.c PL_MULTI_SAS_WORK_NEEDED	(SCGCQ00680218)
  - Enterprise: tie legacy/MSIx interrupt handlers in with HW interrupts	(SCGCQ00680763)
  - Ventura: Enterprise: move backend lane dependent code in PCIe Device Manager	  (SCGCQ00684295 )   
  - PL: final cleanup of PL_INFO NumPhys and HwNumPhys (SCGCQ00685227)
  - Ventura: Integrate PCIe Discovery with Port Enable handling	 (SCGCQ00694260)
  - Ventura: Update Impala header to the latest version	(SCGCQ00696980)
  - Intruder: (IOP : Return correct iocStatus if the board has a higher power requirement than the PCI slot was allocated  (SCGCQ00706279  )  
  - Intruder: Add multicore support for certain target Mode functions(SCGCQ00710176)    
  - Add QM Exception Queue Registers to PL Diagnostic Code	 (SCGCQ00710465)
  - Provide interface to IOP to get local address to backend PCI address mapping.	  (SCGCQ00712817)  
  - Add Multi SAS Core support for Target Mode Hardware cleanup	 (SCGCQ00712972)
  - Improve handler for MCE STATE MACHINE DEBUG TIMER Expird interrupt (SCGCQ00714598)
  - Replace PL_SAS_CORE_0 usages with something more descriptive(SCGCQ00715199)
  - Add prints of CDB and LBA for 600X fault missing IOs(SCGCQ00715660)
  - Intruder PL: Add multicore support for setting/clearing busywhenhalfbusy global flag (SCGCQ00739392 )   
  - Dauntless: Build related changes (SCGCQ00765117)
  - Remove fast path development test support(SCGCQ00769248)
  - Ventura: Shifting of LSI-specific Phy Event Counter encoding(SCGCQ00769439)
  - pl: Add some sanity checks for backend phy, port, SASCore mapping	 (SCGCQ00771332)    
  - PL: Target mode PL_MULTI_SAS_WORK_NEEDED cleanup  (SCGCQ00780092)
  - Undo the firmware changes for workaround of Hardware defect about ArbMode[2] bit (SCGCQ00781194)
  - Ventura: Update PL hardware workaround table(SCGCQ00788132)
  - Ventura: PCIe Discovery should yield to the IOP scheduler(SCGCQ00789678)
  - PL: Rearrange the PCI I/O context structure to prevent accidental use of restricted HW context area. (SCGCQ00791459)  
  - clean up references to global variable in code comments (SCGCQ00793219)    
  - Cleanup of PL_MULTI_SAS_WORK_NEEDED in comments	 (SCGCQ00793224)
  - PL NVMe: Minor updates to NVMe protocol files(SCGCQ00799847)
  - Ventura: PCIe discovery - improve memory resource assignment to backend PCIe devices (SCGCQ00804421 )   
  - Ventura: backend PCIe: configuration of host side mapping resources	  (SCGCQ00805418) 
  - Modify PL call that translates PCI to local address to account for POM scheme used in Ventura	 (SCGCQ00807521)   
  - Remove Sas Port Virtualization(SPV  code which has been defeatured	(SCGCQ00813465)
  - Add PL_FEATURE_SED_SUPPORT	 (SCGCQ00817292)
  - Ventura DA A/R: PCIE error Handling : Device side configurations	  (SCGCQ00817999)    
  - Remove unused PL_USE_PLB_SEGEMENT_1		(SCGCQ00818488)
  - Add new functions for retrieving HW context pointer	 (SCGCQ00818858)  
  - Cleanup of INTRUDER_PORTING	(SCGCQ00819220)
  - Ventura: Update CCR header file and code to latest EDS revision	(SCGCQ00822252)   
  - Ventura: update Cuda header file to latest revision	 (SCGCQ00825826)
  - Ventura SW A/R: Handle SHEX Stall on application errors	(SCGCQ00827432)
  - Ventura: backend PCIe: some bringup changes	(SCGCQ00829039)
  - Ventura DA A/R: Define PCIe error related status codes and log info codes(SCGCQ00829228)
  - Ventura SED support for PIM allowing SED SAScores access to IOA shadow registers (SCGCQ00831248)  
  - Virtual SES SGPIO Support (SCGCQ00832629)
  - Integrate PCIe link events with PCIe Discovery and Device Manager	(SCGCQ00833319)
  - Ventura: backend PCIe: reporting of device link capabilities in PCIe Device Page 0 (SCGCQ00836800)  
  - Initial code to access SED Emulator via POMs and setup SAScore registers (SCGCQ00836918)
  - Ventura: backend PCIe: resolve some NVMe TM TODOs (SCGCQ00839540)
  - Ventura: Enterprise: configure SHEX virtual ports	  (SCGCQ00841697)
  - Ventura Tiger: Poll for Remote SASCore Interrupt	  (SCGCQ00843664)
  - Ventura: PL to provide capability for MR FW to change the IO completion (ReplyDestination  to Host/CPU0/1	  (SCGCQ00846550)
  - Ventura: add some additional register dumping debug code (SCGCQ00852294)
  - Ventura: additional items for diag console debug dump commands	 (SCGCQ00852648)
  - Ventura: Add ring buffer print for RxCtxMgr TimerReached interrupt (SCGCQ00865215) 
  - No release note. PlSim is not a released product.  (SCGCQ00872268)    
  - Additions for Tiger/Styker build	 (SCGCQ00880830)
  - Ventura: backend PCIe: clean up some TODOs	 (SCGCQ00881882)
  - Ventura: backend PCIe: hard reset the PDB cores at PL init time	 (SCGCQ00883464)
  - Tiger/Stryker: Isolate PDB code from Tiger/Stryker builds Part II (SCGCQ00891905)
  - Ventura: backend PCIe: improve robustness of the INTx handler (SCGCQ00896564)
  - Tiger IOP: Add support for the PBAM GPT hardware block(SCGCQ00898142)
  - IOP: Conditionally compile IOA RAM support(SCGCQ00912286)
  - Tiger - Remove firmware workaround for talking to remote SAS Core (SCGCQ00916002)
  - Ventura Build: Add a minimized build to the list of targets	 (SCGCQ00917696)
  - NVMe SCSI Translation updates	(SCGCQ00925607)
  - PL: Ventura-Tiger: SED/Tiger Completion Q allocation(SCGCQ00925758)
  - IOP/PL: Use 128 byte reply message size	 (SCGCQ00927749)
  - IOP/PL: Update additional structures to use OCM PLB Segment 2(SCGCQ00927962)
  - Ventura: backend PCIe: optimize firmware start path for encapsulated requests	(SCGCQ00932934) 
  - Ventura: backend PCIe: handle max payload size mismatch	 (SCGCQ00936258)
  - Ventura/Marlin: Improve TM Code readability	(SCGCQ00937021)
  - Ventura: backend PCIe: handle some additional FxCore exception mid type cases(SCGCQ00937444) 
  - Ventura: Revert the PCIe TM timeout to original TM timeout value(SCGCQ00939494)
  - Ventura: Add CSW registers to pl dbg	(SCGCQ00940256)
  - Ventura B0: backend PCIe: FxCore error handling feature bringup(SCGCQ00941040)
  - PL: Ventura: Add processing of PCIe Topo Change List Add from downstream MPI devices (SCGCQ00942302)  
  - Ventura: Create defines for the Location value for PL_VALIDATE_CALLBACK	 (SCGCQ00948240)
  - Ventura: Revert to old method for FPE frame ownership change	 (SCGCQ00948489)
  - PL: Implement parity checking in some areas	(SCGCQ00950601)
  - Ventura: backend PCIe: NVMe submission queue timeout handling modification	 (SCGCQ00952601) 
  - PL: Initial handling of MPI SAS Device Status Change Event (SCGCQ00953376)
  - Ventura: Eliminate ALADIN interrupt print	(SCGCQ00993798)
  - PL: PCI Config Page support for attached MPI devices (SCGCQ00996165)
  - Ventura: Support for user configurable option to select the PBAM GPIO LED Data polarity	  (SCGCQ00997306)  
  - Ventura: backend PCIe: remove hardcoded Gen2 speed limit (SCGCQ00998522)   
  - PL: Improve MPI IRQ handling and add SCSI IO support (SCGCQ00999444)
  - Tiger: Handle DMA failures during host port link down.	 (SCGCQ01002313)    
  - PL: Handle a second path to a downstream MPI SED(SCGCQ01014773)
  - Tiger: Send FirstDevhandle in SED init message	 (SCGCQ01015370)
  - Ventura PL: Update code to correctly remove both paths upon SED removal	 (SCGCQ01015504)
  - Ventura: backend PCIe: add printing of negotiated link speed/width to diag command	 (SCGCQ01017041)   
  - PL: SED: Add initial support for SMP Passthru (SCGCQ01017119)
  - Ventura PL: MPI Driver must send correct HostPageSize field in IOCInit (SCGCQ01022846) 
  - Ventura: Add Enclosure level and Connector name to PCI device page 0 (SCGCQ01027289)
  - Ventura: Initiate PCal when 3/6 gb SAS link comes up	 (SCGCQ01031980)
  - Ventura IOP+PL: Add support for MPI Passthrough request and reply (SCGCQ01032692 )   
  - Change "BAD IoCount decrement" debug print to standard format (SCGCQ01035202)
  - Ventura Tiger (PL : Implement support for Query Task and Query Task Set to SED Attached SAS/SATA drives(SCGCQ01037212) 
  - Ventura PL: Add basic PCIe R/W error handling to MPI driver	(SCGCQ01037559)
  - Ventura Tiger: Add support for remote SAS/SATA device removal.	(SCGCQ01039132)   
  - Ventura PL: Add SED owned phy table entries	(SCGCQ01042709)
  - Cleanup Host Trace Ouput by zeroing out old entries	(SCGCQ01055035)
  - PL: Support downstream SAS devices when the parent SED goes missing	 (SCGCQ01057643)
  - PL (Tiger : Add support for firmware started fast path IOs to SED attached devices (SCGCQ01058871)  
  - Ventura: Create PLI compliant method for PL to check debug print mask (SCGCQ01063057)
  - Integrate MPI2.6 headers 2.00.44 (SCGCQ01063292)
  - Ventura: Delete AHCI code from codebase	(SCGCQ01071349)
  - Ventura Tiger: Allow TM Target reset to a SSP device to be in scope of an already outstanding target reset to the same device (SCGCQ01073848)
  - Ventura Tiger: Collapse Various PL Firmware Context Flag Bits Into Single Owner Field(SCGCQ01076760)
  - Tiger A0: Add support for PCIe Io Unit Page 0 read(SCGCQ01084789)
  - Ventura/Marlin: backend PCIe: diag command to print device link speeds and widths (SCGCQ01086013)
  - Marlin: Update CCR header file to the latest spec	(SCGCQ01086086)
  - Ventura: backend PCIe: add macro for converting an internal structure pointer to an index (SCGCQ01089514 )   
  - Ventura: backend PCIe: enable/disable new FxCore features at runtime(SCGCQ01092303)
  - Remove IR source code(SCGCQ01107754    )
  - Ventura: backend PCIe: add B0 recognition(SCGCQ01112244)
  - Ventura: add workaround for SCGCQ00887694 to PDB workaround table (SCGCQ01124634)
  - pl: NVMe: NVMe Encapsulated request Force Admin Error Response flag(SCGCQ01130558)
  - NVMe: handful of changes for NVMe SGL support(SCGCQ01134129)
  - Ventura B0: Enable PBAM HW Workaround (CR 46  for Ventura B0(SCGCQ01134375) 
  - Ventura: Set SPL mode in SAS Phy control(SCGCQ01141105)
  - pl: backend PCIe: add compile option for hot reset on PCIe link up (SCGCQ01141218)
  - Ventura: Add fault for unexpected CSW error interrupts	  (SCGCQ01143296)
  - Block JBOD Drive Commands.	(SCGCQ01143396)
  - Ventura: Add build time and date to "pl ver" command(SCGCQ01152140)
  - PL: NVMe Internal header file updates(SCGCQ01162206)
  - pl: NVMe: allow usage of multiple namespace device that supports NSID 1(SCGCQ01163417)
  - Ventura: Auto backplane type detection and configuration support(SCGCQ01172310)
  - PL: Provide makedefs.h in PL Library builds	 (SCGCQ01182555)
  - OEM NVMe backplane detection, PCIe Reset and LED management over I2C(SCGCQ01253925)
  - Ventura/Marlin: backend PCIe: disable PERST# toggle on link down(SCGCQ01262553)
  - Ventura: Validate PortSelected field passed to snooping config function	(SCGCQ01273125)
  - Ventura/Marlin: backend PCIe: NVMe core exception and completion queue handler optimization(SCGCQ01281240 )  
  - Ventura: Defeature using Man page 12 slot info option(SCGCQ01282530)
  - JBOD Personality : NVRAM changes associated with base EPD management changes (SCGCQ01302322)
  - Request for Raid FW to disable battery charger when battery voltage is less than 3V for 2 hours or more.  (SCGCQ01305687) 
  - Create a PL CLI command to send SPICO interrupt	  (SCGCQ01310347)
  - remove devH debug code in DmSMPReadyClear/Set(  (SCGCQ01315972)
  - MR7.3 : Support auto-configuration feature (autopdache  on Ventura (SCGCQ01320083)
  - Check in four XSD files into FW stream, these are used for nvdata migration to CQ.	(SCGCQ01321009)  
  - PL Library Integration 3.250.03.00 (SCGCQ01332072 (SCGCQ01331493)
  - Perc10 update to the HDD/SSD temp. polling (from 5sec to 30sec 	(SCGCQ01335625)
  - Add ARMv5 tool support	 (SCGCQ01344659)
  - [NVRAM] Warning removal 1295 (SCGCQ01373260)
  Making MCTP interrupt context code FIQ safe.	 (SCGCQ01387060)
  - Synchronize time with external enclosures (SCGCQ01421081)
  - Dual SEP support for certain OEM controllers	 (SCGCQ01423790)
  - Integration of PL 03.25.10.00 to 7.2.1 with new SPI library	 (SCGCQ01424789)
  - PI Enablement	 (SCGCQ01425012)
  - Add support in FW for new LL hung connection timer/controls in HW (SCGCQ00105465)
  - EDFB: if EDFB settings change for an expander phy, update the attached device	(SCGCQ00120483)
  - Gen3: TBM - Add UART debug commands	(SCGCQ00127511)
  - Firmware build needs to link pre-built PL library, instead of compiling it with the rest of firmware (SCGCQ00134475)
  - Gen3 PwrMgmt: Add "Presence Detect" capability for direct-attached phys  (SCGCQ00135543)
  - Gen3 PwrMgmt: Add PL support for TxDMA, RxDMA, RxEEDP light sleep/deep sleep/shutdown modes	  (SCGCQ00136933)
  - Gen3 PwrMgmt: Implement UART interface to configure Tx/Rx DMA and RxEEDP sleep modes and sleep timers.	  (SCGCQ00136940)
  - Detroit EDS 1.1 header updates (new register/bits (SCGCQ00144625)
  - Add PLI control request for PauseHostRequest Cuda bit on/off(SCGCQ00144626)
  - Update FPE manage CCA handling to account for completions being routed to FW (SCGCQ00145551 )   
					
  - Update Qmanger State register to latest register format	 (SCGCQ00146599)
  - TBM: Update ForceFlush handling (SCGCQ00149047)
  - FPE: Dev Test Customization	(SCGCQ00151752)
  - SAS-3 Remove Diagnostic Checkpoint Lock and Pause Features	 (SCGCQ00152338)    
  - Gen3: PL Light(SCGCQ00152450)
  - Control Q disabling needs to pause Cuda as well	(SCGCQ00152670)
  - RxBuffer and TxBuffer has grown for gen3 (SCGCQ00153291)
  - Change the mid validation code in PL to filter out mid 1 as well (SCGCQ00156042)
  - FPE - prevent auto reenable of FP on TM completion.	(SCGCQ00156594)
  - Update colt register definition	(SCGCQ00157362)
  - Add back the 250ms delay at end of TM completing before we really complete	  (SCGCQ00159015) 
  - pl: Update Starfish register definition	(SCGCQ00160016) 
  - Update MemCfg utility for SAS3FW compatability (SCGCQ00160081)
  - FPGA: FW Update for Colt Bitstream R24(SCGCQ00160234)
  - FPE: direct cleanup of Fast Path Exception Q appears needed	 (SCGCQ00160401)
  - FPE: add pli control requests to adjust the cuda auto trace levels(SCGCQ00160522 )   
  - FPE - Implement Enable Qdepth Pending functionality for Cuda (SCGCQ00162734)
  - Round 3 gen2 HW WA removal	 (SCGCQ00163434)
  - PL: add FPGA workaround for EDFB DMA Groups	 (SCGCQ00166550)
  - TM: Remove all references to FWNonAuto bit from SATA code(SCGCQ00173988)  
  - TM: SATA: plSataTaskMgmt.c cleanup	 (SCGCQ00173995)
  - Remove workaround code for [SAS2Core] 1443	 (SCGCQ00174732)
  - Remove [SAS2Core] 1682	  (SCGCQ00180293)
  - Remove [SAS2Core] 1411	  (SCGCQ00180304)
  - Remove "hw workaround" SCGCQ00132812  (SCGCQ00180306)
  - Get presence detect working	 (SCGCQ00187448)
  - PL: change Reason reported in SAS Expander Page 1 PhyInfo field	  (SCGCQ00187475)
  - Add R26 colt support (SCGCQ00194012)
  - Gen3: PwrMgmt - Tx/Rx/EEDP Memory needs WA due to Manufacturing Design Alert (SCGCQ00204182)
  - Porting up Gen2 changes from Phase 11 for ISTWI and Enclosure Management CSETs	  (SCGCQ00208724) 
  - Print out a warning when no valid context is selected	 (SCGCQ00209049 )   
  - TxCtxMgr Interrupt handling cleanup	 (SCGCQ00209353)
  - Check in new serdes settings (v2.13   (SCGCQ00218030)
  - Gen 3 : Parity bits checking for the IOA(Detroit  Core	  (SCGCQ00221731 )   
  - TxFM and CtrlQ code cleanup and debug improvements	  (SCGCQ00222848)
  - Invader A0: Target Mode print optimization	(SCGCQ00223545)
  - Allow the frequency deviation of the down spread SSC profile to meet the sas spec (SCGCQ00225376)   
  - Update TM Hw context memory structure for gen3	  (SCGCQ00227727)
  - Active cable support part three	(SCGCQ00227767)
  - Customer requests common SAS3 header files to also include SAS2 only information (SCGCQ00229951)  
  - Change default NVDATA value for MaxCmds	(SCGCQ00230073)
  - Snapshot buffer updates for Gen3(SCGCQ00231500)
  - EDFB function to turn STP AA bit on / off	  (SCGCQ00246383)
  - Active Cable Management: Limit sata link rate based on cable's link rate (SCGCQ00251851)  
  - PL HW WA matrix updates	 (SCGCQ00262832)
  - PL: Implement a vendor specific PLI control request	(SCGCQ00269392)
  - pl pci: Enumeration and Configuration (SCGCQ00308793)
  - [Dauntless]: 'Stang HW header file(SCGCQ00310157)
  - Hardware changes from Invader for Boot(SCGCQ00338455)
  - Various NVMe related changes(SCGCQ00341755)
  - PL: NVMe Task Management(SCGCQ00371626)
  - Support for new config pages PCIe IO Unit Page0,1, PCIe device pages 0,1 described in MPI 2.6 specification(SCGCQ00377454)
  - NVMe firmware-only mode(SCGCQ00378032)
  - Use dedicated Stang NVMe chain area(SCGCQ00391063)    
  - Added handlers for PCIe errors(SCGCQ00400046)
  - Modify PLB to PCIe Address lookup to support 32 bit PLB addresses(SCGCQ00402720)
  - Dauntless: Implement PLI control request for MR to set snoop regions in stang and PDB.(SCGCQ00412920) 
  - Add SOP and PQI header files(SCGCQ00423525) 
  - Disable a set of Invader workarounds that were fixed in Dauntless Colt core(SCGCQ00437137)  
  - SOP Initialization Cleanup(SCGCQ00442840)
  - Add support for PCIe prefetchable memory BARs(SCGCQ00449047)
  - Change SOP Init to start at discovery(SCGCQ00468966)
  - Additional (PCIe - PDB  debug data through pl dbg command(SCGCQ00479680 )   
  - SAS3.5FW: Colt changes: Dma Engine Changes(SCGCQ00518157)
  - SAS3.5FW: Colthw.h changes from Invader to Dauntless(SCGCQ00522283)
  - Ventura: IOA – Impala IO Accelerator Cuda Block Bring Up(SCGCQ00522530)
	  (SA(S3.5FW: Colt changes: RxEEDP registers(SCGCQ00530498)
  - SAS3.5FW: SAS Core changes: TxFrameMgr Register Differences(SCGCQ00531028)
  - Create RaptorHw.h SAS Core register file(SCGCQ00572620)
  - (VENTURA BUILD  Add sufficient capabilities to allow firmware to boot to iopSched(  with NVDATA(SCGCQ00599359)
  - Ventura: Port PPC FAULT routines to ARM(SCGCQ00606223)
  - Modify PLI interface to take SasCoreNum parameter(SCGCQ00630403)    
  - Add HwNumPhysPerSasCore, HwNumPhysPerChip and FirstDevHandle to PL_INFO(SCGCQ00639789)
  - Enterprise: update header file for EDS 1.2(SCGCQ00642848)
  - Backend PCIe: remove some console prints(SCGCQ00651365)
  - PL: Add sas core support to SATA according to the newly modified functions and structur(SCGCQ00653721)
  - plSim: Phase 0.1(SCGCQ00663151)
  - Enterprise: extra start of day changes(SCGCQ00664344)  
  - Removed specified A0/B0 Invader WAs(SCGCQ00667023)
  - Ventura: Backend PCI - generate PCI reset from TM(SCGCQ00674370)    
  - Removed remnants of old HW Workarounds(SCGCQ00680168)
  - Ventura: Enable DCR access macros for ARM(SCGCQ00682711)
  - Add multiple SAS core support for Diag Snapshot feature(SCGCQ00684391)    
  - Ventura: backend PCIe: devhandle map modifications(SCGCQ00690205)    
  - SAS3.5: Implement Firmware Control bit for Unconfirmed Response in FwCompQIoPathCtrl(SCGCQ00706889)
  - Intruder: Add muticore support for Target Mode Abort All command Buffers functionaility(SCGCQ00711462)  
  - Convert RxFrameManager interrupt handler to use all bitmasks(SCGCQ00715074)
  - PL: Final PL_MULTI_SAS_WORK_NEEDED cleanup(SCGCQ00716812)
  - Intruder PL: enable C2 Decrement(SCGCQ00716814)
  - PL NVMe: Use internally saved NSIDs(SCGCQ00723592)
  - Ventura: Create CCI-400 Header File(SCGCQ00731687)
  - Ventura: Implement Build Optimizations Recommended by ARM(SCGCQ00759482 )   
  - Added Prints/Debug Info on 0x6230 Fault(SCGCQ00762305 )   
  - Ventura: Implement PCIe Discovery Event Replay(SCGCQ00771839)
  - Fix a PL Internal Structure(SCGCQ00784564)
  - Ventura: Remove PL private files from the IT build(SCGCQ00785195) 
  - Improve the PL_ASSERT macro usage.(SCGCQ00804858)
  - Cleanup and changes to SASCore register pointer initialization(SCGCQ00813952)  
  - Ventura DA A/R: PCIe Error handling in NVMe init path(SCGCQ00821998)
- Aladin Core: Functionize Aladin Reset Code in PL (Start of Day(SCGCQ00823048)
  - Remove remaining usages of plGetHwContext( 	(SCGCQ00824293)
  - Add NumberOfSEDs and NumberofSEDMids to mfg page 9(SCGCQ00831065)
  - Ventura: backend PCIe: hide backend PCIe devices from virtual functions (part 1(SCGCQ00854613)  
  - Ventura: Add SAS exception queue contents to debug register dump(SCGCQ00890978)
  - Remove Dauntless Defines: PL - SAS core specific and miscellaneous changes.(SCGCQ00905985)
  - Tiger/Stryker: CSR init(SCGCQ00907988)
  - Add support for R37 SAScore version(SCGCQ00928920)
  - PL: Update plPhySetPowerMode(  for Ventura(SCGCQ00936306)
  - PL: Handle SAS Enclosure Change Event from downstream MPI device(SCGCQ00952961)
  - Tiger PL & IOP: First round of implementing SAS core memory translation(SCGCQ01000544)
  - Ventura Tiger support added to configure hardware to send IO to Tiger device(SCGCQ01006667 )   
  - Ventura: Port optical support to ventura(SCGCQ01019664)
  - Ventura: FPE: add FxCore enqueue counter to FPE stats dump(SCGCQ01035197)
  - Ventura/Marlin: backend PCIe: allow assignment of additional memory space to backend PCIe devices(SCGCQ01040918) 
  - Ventura PL: Populate the Timestamp field of IOCInit requests sent to SEDs(SCGCQ01079240)
  - Ventura/Marlin: backend PCIe: negotiated speed/width fields in PCIe Device Page 0(SCGCQ01089506)    
  - Backend PCIe: add some additional registers to a backend PCIe related header file(SCGCQ01107259 )   
  - PL: Implement support for SAS Device Discovery Error Event(SCGCQ01233843)
  - Disable T10 Protection Information support(SCGCQ01325001)
  - Change PL baseline from 03.250.04.00 to 03.250.08.00(SCGCQ01363971)    
  - Updating OEM enumeration PL Phase_4.0 - 04.15.00.00 MR PL(SCGCQ01366959 )   
  - Just enable the Megamon SBR reload command.(SCGCQ01371967)
	- (SCGCQ01402213)
	- FW added supportOOBCtrlFwDownload to indicate support.  currently disabled)(SCGCQ01420786 )
  - SAS2FW: Need method to set Sentinel Interrupt Coalescing values(SCGCQ00034638)
  - Update pathway analysis for 12G speeds(SCGCQ00128450)
  - Improve TM performance and debug via a per device TM Queue(SCGCQ00130621)
  - Rearrange TM context area bits to accomodate Gen2 TM enhancements(SCGCQ00143171)
  - Convert the SAS IOUnit control request for enable/disable of fast path to use PLI control request when going from IOP to PL(SCGCQ00145206 )   
  - SAS3 Update to the SAS Core Colt's RX_CTX_DMA_DIAG struct(SCGCQ00148678)
  - Code cleanup and bug fixes for adding entries to Colt's TxDMAQ(SCGCQ00149115)
  - pl: Detect if a device supports Download Microcode DMA(SCGCQ00152237)
  - Fix the random sgl read problem(SCGCQ00152697)    
  - FPE: turn off FPE for SATA(SCGCQ00160887)
  - Remove PL_SAS2HW_RXDMA_WRAP_WORKAROUND code(SCGCQ00163618 )   
  - (Invader  BT 1680 removal in IOP and PL(SCGCQ00170554)
  - Colt 1.4 EDS updates(SCGCQ00170626)
  - Dump message frame for the mid when x5842 fault is hit(SCGCQ00176343)
  - Remove [SAS2Core]1754(SCGCQ00180249)
  - CLI menus should be dynamically spaced(SCGCQ00205520)
  - update some back channel training register definitions(SCGCQ00208312)
  - Add an temporary workaround to dump the starfish registers(SCGCQ00210503)
  - Colt EDS 1.8 register updates(SCGCQ00223522  )  
  - Disable MisMatch FM for b0(SCGCQ00243436)
  - Trace Buffer timestamping ability for host drivers via a SCSI IO(SCGCQ00258646)
  - pl: NVMe Stang Initialization(SCGCQ00336344)
  - NVMe glue code(SCGCQ00357921)
  - Added command to show PCIe capabilities list for an endpoint.(SCGCQ00365545 )   
  - Added code to dump IOA registers(SCGCQ00383645)
  - Update existing backend PCIe events to MPI-2.6 format(SCGCQ00391416)
  - Added structures required for FW R/W IO Path (including IO Breakup(SCGCQ00402757)   
  - Update to latest changes for PCI fastpath engine(SCGCQ00434773)
  - MPI 2.6 Rev. B Feature: Add NVMe SGL support. Add Capabilities field to PCIe Device Page 2.(SCGCQ00443383)  
  - Added "pl pci ahcislot" to print AHCI slot information(SCGCQ00449096)
  - NVMe: Check in init workarounds for early NVMe device(SCGCQ00450246)
  - Additional encapsulated path items(SCGCQ00469629)
  - Create new build environment for future product(SCGCQ00477789)
  - Update PQI and SOP to the latest revisions(SCGCQ00502916)
  - Update PL for TxDMA Context Manager Register Changes in SAS Core from Invader(SCGCQ00518713)
  - NVMe: task management, part 2(SCGCQ00525641)
  - NVMe: debug command items(SCGCQ00563923)
  - PL: Update power management code to account for multiple SAS cores(SCGCQ00606792) 
  - Create suitable conversion functions between chipRelativePhyNum , coreRelativePhyNum and SasCoreNum(SCGCQ00641789)
  - Replace direct POM accesses that occur in generic PCI code (non-protocol  with safe accessor functions.(SCGCQ00642671)  
  - Intruder: Updates for FPGA(SCGCQ00665826)
  - Update plEDFB.c to be multiple SASCore compatible(SCGCQ00685110)
  - Intruder: Add Multi SAS core support to Target DMA passthrough complete handler(SCGCQ00712889)
  - (Target Only  Hw Initiator and VID Response Table is not common to different cores. So make multicore changes accordingly.	(SCGCQ00718699)    
  - Ventura: Enterprise: return unique status for CRS on config space access(SCGCQ00761092)
  - Ventura: Add support for PCIe Topo Change List Event PORT_CHANGED status(SCGCQ00771836)
  - Ventura: Add Control Q Fifo parameters to hardware parameters(SCGCQ00789508)
  - Ventura: Update internal NVMe file headers(SCGCQ00895664)
  - IOP: Tiger/Stryker convert to use ARM Vectored Interrupt Controller(SCGCQ00917849)
					)
  - Delay host notification of NVMe drive until after the complete NVMe Initialization.(SCGCQ00926709)  
  - PL: Add handling of inbound SAS Topology Change List Events(SCGCQ00939823)
  - Tiger: Handle Host Link Down-Up(SCGCQ00997588)
  - User must be warned when they create a VD across the front backplane and enclosures behind the switch[H745P MX](SCGCQ01291050)
  - MR-7.2 INTEL NVME:Can't Start Patrol Read Under HII/Storcli/LSA(SCGCQ01342927)
  - Cache Snooping Should Not Be Disabled after L2 Flush as OCM flush may still be active.(SCGCQ01345679 )   
  - Allow Host IOs while pinned cache flush is in progress during run time(SCGCQ01350527)
  - Warning removal 128(SCGCQ01364923)
  - Graceful Handling of faulty enclosures, not providing config pages.(SCGCQ01375949)
  - BST script for JBOD personality(SCGCQ01389661)
  - Aero release support(SCGCQ01392706)
  - MPI Target Assist Request changes(SCGCQ00088392 )   
  - FPGA: Update interrupt masks.(SCGCQ00095007)
  - add print for 3rd possible case occuring on plFpeChangeOwnertoPL((SCGCQ00147319)  
  - FPE: Cuda Pend Queue Cleanup during TM(SCGCQ00160611)
  - Round 1: Remove unused HW workarounds (old gen2 wa's(SCGCQ00161805)
  - Add TxDMA/Ctx cleanup early on in TM start. Keep the existing cleanup at end to handle any xfer rdy that came in last second(SCGCQ00162474)    
  - Colt EDS 1.5 updates(SCGCQ00187684)    
  - Add SASCore->FPE completion Q dump to "pl dbg all"(SCGCQ00228221)    
  - pl pci: NVMe Initialization(SCGCQ00276500)
  - pl: NVMe SCSI IO Path(SCGCQ00308842)
  - (IOA  Modify pliTBMAddEntry(  so that it automatically selects port via processor ID(SCGCQ00350777 )   
  - [Dauntless]: SGL Translation - IEEE-64 to NVMe (1.1 compliant(SCGCQ00362775)
  - Firmware Read/Write IO Path - Base Functionality (Error paths(SCGCQ00411229)
  - Add SOP/PQI initialization workarounds for SOP drive(SCGCQ00449049    
  - Updated FxCore blocks to match new hardware(SCGCQ00522531)    
  - Intruder, Dauntless & Ventura: Update PLI control request SAScore request for multi core (plmsg.c(SCGCQ00684425 )  
  -(SCGCQ00758323 )
  - Ventura: Update internal structures(SCGCQ00898193 )   
  - Ventura: Jitter changes(SCGCQ01212876)   
  - Adapting to new PL baseline Phase_4.0 - 04.25.00.00(SCGCQ01380072)    
  - Port Layer error handling - cleanup/improve/optimize(SCGCQ00126458)   
  - FPGA: Fw needs to wait for PLL ready before switching clock domain(SCGCQ00145565)
  - FPE: Prevent Zero IO Count state advancement when CCA is disabled in NVData(SCGCQ00167140)   
  - update serdes values(SCGCQ00186665)
  - NVMe device asynchronous event handling(SCGCQ00334789)
  - [Dauntless]: Initial file checkin (SGL translation(SCGCQ00342709)
  - Changes to internally generated commands to AHCI devices(SCGCQ00376480  )
  - Discovery and Device Manager changes for need to start init process earlier and setup WWID for devices(SCGCQ00455897)  
  - Diag console command for dumping backend PCIe enumeration structures(SCGCQ00499868)
  - Enterprise: error message counter configuration(SCGCQ00552431)
  - Ventura: Update PL Light to use CPU Number(SCGCQ00760481  )  
  - Add PIM/POM table entries for Tiger/Styker(SCGCQ00910622 )   
  - This ER created for refactoring two Invader CSETs on a new Ventura DM interface(SCGCQ01291836 )
 - Added NVME passthrough support for MR stack(SCGCQ01391416)
 - enable OOB FW download for MR alone.(SCGCQ01455694  )
  - Integrate MR PL/SCS Libs: SASFW_Ventura_Phase_4.0 - 04.25.04.00 MR PL-SCS Libs(SCGCQ01462721 ) 
  - New debug commands(SCGCQ00376574  )  
  - Add Support for Single Image Cache Offload.(SCGCQ01309432)


Version 50.2.1-0601 - Moderate Impact/Low Probability of Occurrence
-------------------
BIOS:  7.02.03.1_4.17.08.00_0x07020401
UEFI Driver: 0x07020401
HII:  07.02.05.01
MR FW:  5.020.00-1045
PACKAGE:  50.2.1-0601
Fixes:
- R0 HDD WB-Switching between cases of IO going to cache and bypassing cache happens frequently on certain profiles (SCGCQ01138581)
- Multipath SAL script failed (SCGCQ01177445)
- manufacturing info for enclosure is showing zeros under SMP passthru menu in Storelib. (SCGCQ01188954)
- ESXi 6.0 U2 or ESXi 6.5 hangs during reboot (SCGCQ01214236)
- Progress time for CC/BGI is inconsistent with Rebuild/Copyback (SCGCQ01220611)
- Controller hangs during OCR (SCGCQ0122920)5
- controller hangs (cannot get into debugger) after running i/o for a few hours (SCGCQ01229276)
- MR7.1 UEFI BIOS Is Not Shown for OEM controller (SCGCQ01229284)
- CLI reports "Support LargeIOSupport" as No (SCGCQ01229311)
- Critical Message = " Error restoring offload cache " during MedusaIO running to R50 with power loss (SCGCQ01229975)
- Change OEM_MERCURY Check to IoPathFlagOemMercury (SCGCQ01230006)
- The QDChanged flag is never reverted back to 0 (SCGCQ01230078)
- Next LD is not set while PD rebuild is in progress and the current LD is deleted. (SCGCQ01231043)
- Fix to fail back pre read call back graciously when there are unrecoverable errors are hit (SCGCQ01231653)
- During learn cycle, the battery does not discharge. (SCGCQ01232276)
- NVMe: DC found when running Chaos on R5-WT-DIO-NORA with IO/Buffer size of 16kb or less (SCGCQ01232376)
- Drive Firmware Upgrade fails while running IO's on a JBOD drive. (SCGCQ01232733)
- Unable to see any option for Crypto erase in HII for any HDD/SSD ISE drive (SCGCQ01233384)
- Assertion failure in ../../mros/mem.c at line 617: mb->tag==tag after update to new ROP 270 and reboot (SCGCQ01235357)
- Performance Reduction seen in BST (SCGCQ01235742)
- Defect port from mainline (SCGCQ01235761)
- Max NVMe drive support shows as 8 for MR 7.1 for NVMe profile (SCGCQ01236604)
- some SATA ISE drives are not displaying as ISE capable (SCGCQ01237004)
- NVMe 9440-8i Rebuild does not start on 2 drive R1-Win7 (SCGCQ01237009)
- Locate PD does not work with SGPIO backplane (no blinking LED) (SCGCQ01237036)
- Loss of access to PI VD causes crash (SCGCQ01237965)
- OOB discovery fails (SCGCQ01238858)
- PL rejecting cmds due to invalid values in structure members (SCGCQ01240309)
- Multiple VDs created over idrac with racadm fails (SCGCQ01241098)
- Print DirtyCache status (GPIOA6 )during controller Initialization (SCGCQ01241691)
- Set mdts value to 128KB in case any drives has higher mdts value (SCGCQ01242011)
- DC observed on R10 VD, post importing the foreign configuration after Megamon triggered OCR (SCGCQ01242067)
- Redundant path broken for PD 00(e0x40/s0) message for OS Disk when removing a known bad SATA SSD from a different slot. (SCGCQ01242091)
- Excess prints slows controllers response to host commands. (SCGCQ01242470)
- C10 - FW crashing at "Assertion failure in ../../hw/main.c at line 606: 0" during looped cache offload test (SCGCQ01244311)
- Set mdts value to 128KB in case any drives has higher mdts value (SCGCQ01245535)
- Drives not getting discovered after OCR/Reboot in iMR controller with 295 Fw package. (SCGCQ01247494)
- OOB Storage Configuration - Unable to create 3 x 14PD, 42 drive simple RAID10 VD. (SCGCQ01247647)
- PRequest message shows numerous times in log (SCGCQ01249133)
- Fatal firmware error: Line 934 in ../../cpu/arm/exceptions.c while importing foreign config with pinned cache (SCGCQ01249809)
- Kill adapter found while running CC on VD's with media errors (SCGCQ01249815)
- Continuous Prints observed during Reconstruction operation. (SCGCQ01249820)
- Inconsistencies in foreign configuration import when cache is pinned. (SCGCQ01249966)
- Initiatlize partition map during PD Replace within LD (SCGCQ01250193)
- GetAllLDAllowedOperation call in Storelib is not returning Allowed operations when some LDs are deleted (SCGCQ01250559)
- iMR cable pull IO Drop on VDs (SCGCQ01250688)
- Hibernate Feature in Windows 7 doesn't work properly, if IO's are running in background (SCGCQ01251505)
- Issue - OLTP performance is less than Intruder by 10-20%. (SCGCQ01252558)
- Hitting Kill adapter for importing Foreign configuration and query controller information( IO was not running ). (SCGCQ01253096)
- FW Kill Adapter observed while performing the RLM operation on OS VD from R1 to R0 (SCGCQ01253798)
- Life Cycle 3.00.00 Build 24: Redundant VD shows as FAILED State, when its actually Degraded. SCGCQ01253921
- Controller enters MonTask during Rebuild on PI enabled VD (SCGCQ01255170)
- Profile ID update Event doesn't reflect prior profile ID (SCGCQ01255917)
- CC is not correcting DIFF errors after reporting them as corrected. (SCGCQ01256210)
-  WG: In case of preview, FW should not return "MFI_STAT_CTRL_RESET_REQUIRED" status code : MR Ventura (SCGCQ01256323)
- FW breaks into montask with fusion MU error - data descriptor overflow error.. (SCGCQ01256286)
- FW hit "C0:MptIssueCmd: ERROR!!! Unknown command x0 in Rdm=x7fb95780" upon booting up (SCGCQ01259277)
- SBL bus init leads to system hang and BST failure (SCGCQ01259726)
- RSOD been observed after disabling Data protection on PI enabled VD (SCGCQ01260419)
- iMR controller missing one NVMe drive when reboot (SCGCQ01260754)
-: ddf while remove 2nd pd in 2DR1,4DR10 for pinned cache (SCGCQ01261386)
- Improvements for offload/restore reliability (SCGCQ01262608)
- There is mprintf error (printing a message) that is causing this TLB error during error recovery for sanitize. (SCGCQ01263180)
- Create slot id to pd mapping for NVMe drives (SCGCQ01263802)
- Storcclif start diag DMA Test failed (SCGCQ01264038)
- Disable BIOS flag in Megamon ( dbgflag biosDisable 1 ) successfully set but it is not actually working (SCGCQ01264139)
- After performing Clear/PD erase on SATA SSDs system hangs (PL Fault) (SCGCQ01264210)

Version 50.0.1-0381-1 - High Impact/High Probability of Occurrence
-------------------
BIOS:  7.00.09.0_4.17.08.00_0x07001600
UEFI Driver: 0x07001600
HII:  07.00.38.01
MR FW:  5.001.00-1025
PACKAGE=50.0.1-0381

- Fixed a package issue that would attempt to update unsupported devices.

Version 50.0.1-0381 - High Impact/High Probability of Occurrence
-------------------
BIOS:  7.00.09.0_4.17.08.00_0x07001600
UEFI Driver: 0x07001600
HII:  07.00.38.01
MR FW:  5.001.00-1025
PACKAGE=50.0.1-0381

- Fixed an issue where the controller could hang while importing a commissioned hot spare drive. (SCGCQ01393703)

Enhancement(s)
- Implemented a workaround for a device attached between the root complex and the controller; in order to addresses the issue of the controller going to Gen 1 speed during D3 Hot state transition due to an issue with IDT timer. (SCGCQ01401585)


Version 50.0.0-0374-1 - Moderate Impact/Low Probability of Occurrence
-------------------
BIOS:  7.00.09.0_4.17.08.00_0x07001600
UEFI Driver: 0x07001600
HII:  07.00.38.01
MR FW:  5.001.01-0805

- Removed support for out-of-band updating method.


Version 50.0.0-0374 - New Function Only/No fixes
-------------------
BIOS:  7.00.09.0_4.17.08.00_0x07001600
UEFI Driver: 0x07001600
HII:  07.00.38.01
MR FW:  5.001.00-0805





Lenovo Data Center Group Linux OS Support Home Page
linux.lenovo.com

© 2018-2019 Lenovo. All rights reserved

ThinkSystem RAID and ServeRAID M Series SAS/SATA Controller Driver for RHEL 7



ThinkSystem RAID and ServeRAID M Series SAS/SATA Controllers Driver for Linux

Supported Kernesls:  7.6
                     7.5    3.10.0-862 
                     7.4    3.10.0-693
					 7.3    3.10.0-514
                    

Adapters Supported: 
  - ThinkSystem RAID 930-8i 2GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 8GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-24i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-8e 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-4i 2GB Flash Flex Adapter
  - ThinkSystem RAID 730-8i 1GB Cache PCIe 12Gb Adapter
  - ThinkSystem RAID 730-8i 2GB Cache PCIe 12Gb Adapter
  - ThinkSystem RAID 530-8i PCIe 12Gb Adapter
  - ThinkSystem RAID 530-8i Dense Adapter
  - ThinkSystem RAID 530-4i 4GB Flex Adapter
  - ServeRAID M1215 SAS/SATA Controller for Lenovo System x (46C9114)
  - ServeRAID M1210 SAS/SATA Controller for Lenovo System x  
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x880 X6 Compute Node
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x240 M5 Compute Node
  - ServeRAID M5225-2GB SAS/SATA Controller
  - ServeRAID M5210e SAS/SATA Controller for System x
  - ServeRAID M5210 SAS/SATA Controller
  - ServeRAID M5215 SAS/SATA Controller (00JX142)
  - ServeRAID M5115 SAS/SATA Controller (90Y4390)
  - ServeRAID Lenovo Storage Expansion Node (65Y8588)
  - ServeRAID M5110 SAS/SATA Controller for Lenovo System x (81Y4481)
  - ServeRAID M5110e SAS/SATA Controller for Lenovo System x 
  - ServeRAID M5120 SAS/SATA Controller for Lenovo System x (81Y4478)

NOTE TO SERVICE - Reference RETAIN #N/A

07.707.04.00-1 - Moderate Impact/Low Probability of Occurrence
--------------------
MR 7.7 (new)

Defects:
- Driver will use 64 bit request descriptor for sending IO to Ventura firmware.(SCGCQ01514452)
- FW flash is not needed for driver.(SCGCQ01593539)
- Modified driver prints to dump relevant FW provided values(part of controller info structure) in syslog.(SCGCQ01626839)
- Merge upstream patch "Convert timers to use timer_setup" to in-house and support timer_setup API in 4.15 kernels.(SCGCQ01586787)
- MR7.7: scsi_dma_map() is called twice in IO path.(SCGCQ01619432)
- Driver is incorrectly deciding combined reply queue mode for SAS3.0 controller(SCGCQ01633318)
- Updated driver's file- "OS_Support_list_mr7.7.txt" with CMA support enablement and retpoline compliant driver binaries.(SCGCQ01760521)
- Renamed scratchpad registers from scratchpad0 , scratchpad1 etc ... in order to align with firmware naming convention.(SCGCQ01440031)
-(SCGCQ01664978)
- Use IOC_INIT frame once driver has verified IOC_INIT frame allocation was successful.(SCGCQ01440720 port of SCGCQ01430747)
- Driver should go through stream detection logic after it's finalized which path(fastpath vs non fastpath) IO will go through.(SCGCQ01483730 port of SCGCQ01468189)
- XenServer 7.3 OS support- MR 7.6.(SCGCQ01594134 port of SCGCQ01554012)
- Divert FastPath IO with Chain frame to Firmware path.(SCGCQ01598186 port of SCGCQ01593175)
- expose fw_outstanding and drv_outstanding variables to the OS level sys interface.(SCGCQ01475068 port of SCGCQ01019663)
- Driver should go through stream detection logic after it's finalized which path(fastpath vs non fastpath) IO will go through.(SCGCQ01542421 port of SCGCQ01468189)
- expose fw_outstanding and drv_outstanding variables to the OS level sys interface.(SCGCQ01542422 port of SCGCQ01019663)
- After a kill adpater, megasas_wait_for_adapter_operational waits for almost 360seconds before bailing out.(SCGCQ01619441 port of SCGCQ01615239)
- Setup IRQs only after Reply descriptors are allocated.(SCGCQ01542423 port of SCGCQ01506133)
- MR: Remove trace kernel RPMs from SUSE SLES11 SP4 driver iso images.(SCGCQ01594109 port of SCGCQ01563428)
- megasas_get_target_prop failing after OCR completed.(SCGCQ01619439 port of SCGCQ01607430)
- NVMe Task Management - Controller Reset Support (MegaRAID).(SCGCQ01592015 port of SCGCQ01545040)
- Updated OEL6_UEK and OEL7_UEK buildkit.(SCGCQ01443432 port of SCGCQ01439776)
- Use IOC_INIT frame once driver has verified IOC_INIT frame allocation was successful.(SCGCQ01449786 port of SCGCQ01430747)
- Use pci_{alloc/free}_irq_vectors for >=4.12 kernels.(SCGCQ01449816 port of SCGCQ01442784)
- Setup IRQs only after Reply descriptors are allocated.(SCGCQ01514459 port of SCGCQ01506133)
- Driver will use 64 bit request descriptor for sending IO to Ventura firmware.(SCGCQ01523087 port of SCGCQ01514452)
- Increased JBOD FPIO timeout by 1 sec to workaround hardware bug which causes timeout 1 sec earlier than provided timeout value.(SCGCQ01542419 port of SCGCQ01449957)

EnhancementRequests (23)
- Use pci_{alloc/free}_irq_vectors for >=4.12 kernels.(SCGCQ01442784)
- Few officially unsupported PCI IDs are removed from MR7.7 driver code.(SCGCQ01598587)
- XenServer 7.4 OS support - MR 7.7.(SCGCQ01628129)
- Increased JBOD FPIO timeout by 1 sec to workaround hardware bug which causes timeout 1 sec earlier than provided timeout value.(SCGCQ01449957)
- Rebase inbox megaraid_sas driver to inhouse to reduce two different code base for maintenance.(SCGCQ01578030)
- MR_Aero: Create timer based thread in MR drivers to detect firmware FAULT.(SCGCQ01157766)
- Remove UpdateIoMetric and hence adapter level spinlock from IO path(SCGCQ01522127)
- Create cpu to msix table for kernel provided PCI_IRQ_AFFINITY (>=4.12 kernel).(SCGCQ01598134)
- OS driver support for Oracle Linux 7.5 - MR 7.7.(SCGCQ01586106)
- OS Driver Support for Ubuntu 18.04- MR 7.7.(SCGCQ01586128)
- Support RHEL7.5 GCA (3.10.0-862.el7.x86_64).(SCGCQ01586135)
- Early detection of faulty controller.(SCGCQ01599562)
- Change attribution language from Avago to Broadcom and update copyright end year.(SCGCQ01753095)
- Offload R5/R6 division to driver.(SCGCQ01513544)
- Update Linux Driver BST scripts and wrapper.(SCGCQ01529349)
- Marlin support is added to drivers.(SCGCQ01440724)
- Remove support for RHEL7.1, OEL7.2 and SLES12.(SCGCQ01449982)
- Optimize code around (raid context) in IO path.(SCGCQ01598187)
- Removed support of RHEL7.1, SLES12 and OEL7.2.(SCGCQ01600475)
- FW OCR Debug Mechanism - triggerSnapDump.(SCGCQ01520447)
- Set SLD bit in RAID map when "enableSLDOnAllRWIOs" is enabled.(SCGCQ01715619)
- Revert code changes related to iMR performance throttling.(SCGCQ01749962)
- Revert changes added in driver to divert FastPath IO with Chain frame.(SCGCQ01752939)


Version 07.705.04.00-5 - Moderate Impact/Low Probability of Occurrence
---------------------
fix:the driver support os rhel7.5

Defects (7)
- Provided driver workaround to reset __GFP_WAIT flag while allocating IO request frames.(SCGCQ01394892)
- Driver will use 64 bit request descriptor for sending IO to Ventura firmware.(SCGCQ01514452)
- Set DMA mask after FW is in READY state in PCI resume path of megaraid_sas driver(SCGCQ01389431)
- Fixed few dev found and coverity reported defects(SCGCQ01392652)
- Selective stream detection logic in driver(SCGCQ01392643)
- During PCI remove, set unload flag after scsi_remove_host is called.(SCGCQ01392656)
- update LD map after populate drv_map, increase wait in IOCTL, fix index in error handling, rework in refiring DCMDs.(SCGCQ01415439)
- Added support for threaded interrupts.(SCGCQ01615015 port of SCGCQ01498747)
- Driver should go through stream detection logic after it's finalized which path(fastpath vs non fastpath) IO will go through(SCGCQ01483730 port of SCGCQ01468189)
- Use IOC_INIT frame once driver has verified IOC_INIT frame allocation was successful.(SCGCQ01455132 port of SCGCQ01430747)
- MR: OEL 7.4 and 6.x x86_64 RPMs do not have the correct kernel versions.(SCGCQ01611888 port of SCGCQ01607445)
- expose fw_outstanding and drv_outstanding variables to the OS level sys interface.(SCGCQ01475068 port of SCGCQ01019663)
- Updated correct supported kernel version of Ubuntu16.04 in driver's document- OS_support_list_mr7.5.txt.(SCGCQ01564604 port of SCGCQ01454090)
- Added NVME passthru support in MR linux driver.(SCGCQ01424605 port of SCGCQ01407028)
- Updated correct supported kernel version of Ubuntu16.04 in driver's document- OS_support_list_mr7.5.txt.(SCGCQ01455206 port of SCGCQ01454090)
- Added NVME passthru support in MR linux driver.(SCGCQ01455135 port of SCGCQ01407028)
- Updated OEL6_UEK and OEL7_UEK buildkit.(SCGCQ01443433 port of SCGCQ01439776)
- Setup IRQs only after Reply descriptors are allocated.(SCGCQ01514459 port of SCGCQ01506133)
- Use pci_{alloc/free}_irq_vectors for >=4.12 kernels.(SCGCQ01449816 port of SCGCQ01449816)
- Use IOC_INIT frame once driver has verified IOC_INIT frame allocation was successful.(SCGCQ01449786 port of SCGCQ01430747)
- Set DMA mask after FW is in READY state in PCI resume path of megaraid_sas driver.(SCGCQ01392672 port of SCGCQ01389431)

EnhancementRequests (10)
- MR7.4: Add SLES12 SP3 OS support.(SCGCQ01396756)
- Added support for RHEL7.4.(SCGCQ01455156)
- Added driver support for OEL7.4.(SCGCQ01396747)
- Increased JBOD FPIO timeout by 1 sec to workaround hardware bug which causes timeout 1 sec earlier than provided timeout value.(SCGCQ01449957)
- Added support for threaded interrupts.(SCGCQ01498747)
- MR7.4: OS driver support for RHEL 7.4.(SCGCQ01396738)
- Added support for SLES12 SP3.(SCGCQ01455167)
- Added driver binary support for Xenserver7.2.(SCGCQ01393249)
- Remove support for RHEL7.1, OEL7.2 and SLES12.(SCGCQ01449982)
- Removed support for few OS to align with OS support matrix policy.(SCGCQ01393194)


Version 7.703.07.00- Moderate Impact/Low Probability of Occurrence
---------------------
fixes:
- Send sense buffer upper 32bits inside IOC INIT frame.(SCGCQ01315987)
- MR: On OEL 6.x/7.x with UEK kernels - megaraid_sas.conf file from the kmod rpm does not match kernel version.(SCGCQ01319368)
- pass upper 32 bits of version buffer and system information buffer to FW inside IOC INIT frame.(SCGCQ01326366)
- Workaround changes for FW MFA frame pull issue.(SCGCQ01338087)
- Log dmesg if IOC INIT fails in IOMMU and RDPQ enabled enviornment for user information only.(SCGCQ01338097)
- Validated if any of DMA buffers pool which should be in same 4GB region does not cross 4GB boundary.(SCGCQ01338372)
- Memset to zero for MFI command frame for IOC INIT and use lower_32_bits() macro to get lower 32bits of DMA address passed to FW.(SCGCQ01341287)
- Removed Crusader ID(device ID- 0x0015) from supported PCI IDs of MR7.2 linux driver.(SCGCQ01350963)
- MR7.3: Code review defect - ioc_init_frame not freed during kernel module unload.(SCGCQ01384694)
- MR7.2: In megasas_issue_tm() SMID needs to be used for Task abort case only.(SCGCQ01315252)
- Incorrect processing of IOCTL frames for SMP/STP commands.(SCGCQ01383823)
- Set cmd_status inside DCMD/IO/header frame to MFI_STAT_OK to wake up all pended IOCTLs.(SCGCQ01298582)
- Removed print "Failed from megasas_complete_cmd" from PD CFQ sequence DCMD completion path.(SCGCQ01321565)
- Do not switch DMA mask to meet same 4gb requirement. IOMMU does not work well with such DMA mask switch.(SCGCQ01342578)
- Allocated MFI frame size and the size of MPT chain frame(Where MFI frame resides for MFI MPT passthru commands) should match.(SCGCQ01342650)
- Minimum possible value for module parameter- resetwaittime should be 1 secs instead of 0 secs.(SCGCQ01344137)
- Set DMA mask after FW is in READY state in PCI resume path of megaraid_sas driver.(SCGCQ01389431)
- MR7.3: Data miscompare found with WB secure VD RAID 1 with LSA sending IOCTLs in parallel.(SCGCQ01378684)
- Set cmd_status inside DCMD/IO/header frame to MFI_STAT_OK to wake up all pended IOCTLs.(SCGCQ01381770 port of SCGCQ01298582)
- MR: On OEL 6.x/7.x with UEK kernels - megaraid_sas.conf file from the kmod rpm does not match kernel version.(SCGCQ01320324 port of SCGCQ01319368)
- Use IOC_INIT frame once driver has verified IOC_INIT frame allocation was successful.(SCGCQ01455132 port of SCGCQ01430747)
- Updated correct supported kernel version of Ubuntu16.04 in driver's document- OS_support_list_mr7.5.txt.(SCGCQ01455206 port of SCGCQ01454090)
- Added NVME passthru support in MR linux driver.(SCGCQ01455135 port of SCGCQ01407028)
- Updated OEL6_UEK and OEL7_UEK buildkit.(SCGCQ01443433 port of SCGCQ01439776)
- Minimum possible value for module parameter- resetwaittime should be 1 secs instead of 0 secs.(SCGCQ01344142 port of SCGCQ01344137)

EnhancementRequests:
- Added support for 64bit DMA mask for invader.(SCGCQ01294199)
- MR7.3: add support for Citrix XenServer 7.1 OS.(SCGCQ01257971)
- Send current time to FW during IOC init.(SCGCQ01307072)
- Added support for RHEL7.4.(SCGCQ01455156)
- MR7.3: add support for OEL 6.9.(SCGCQ01289005)
- Added support for threaded interrupts.(SCGCQ01498747)
- Added support for 64bit DMA.(SCGCQ01301940)
- Added support for SLES12 SP3.(SCGCQ01455167)


Version 7.702.06.00- Moderate Impact/Low Probability of Occurrence
---------------------
Defects (47)
 - Reset MPT frame field cmd_completed while retrurning it back to free pool.(SCGCQ01176530)
 - Optimized R1 FP write code.(SCGCQ01191077)
 - Before populating driver RAID map copy memset drv_map to zero and ldTgtIdtoLd array to 0xff(SCGCQ01204087)
 - Initialize stream detection array properly.(SCGCQ01204096)
 - On SPARC/Big endian host, need to convert peerSMID to little endian to CPU before accessing(SCGCQ01216698)
 - Fixed coverity reported issues and changed name of few functions.(SCGCQ01219231)
 - Don't set tm_capable for JBDO when PD CFG SEQ map is not available(SCGCQ01226222)
 - Remove local defination FALSE/TRUE and use OS provided false/true.(SCGCQ01256130)
 - Used vmalloc for crash dump buffers and driver's local RAID maps(SCGCQ01270059)
 - Reduce size of fusion_context allocation during driver load by moving load_balance_info array out, and try vmalloc if kmalloc fails.(SCGCQ01183280)
 - Flooding of messages- "BRCM: IO does not end on page boundary; sge_len" while running RAW IOs.(SCGCQ01189815)
 - Fixed data corruption by asking OS not to do merging of IOs to avoid SGE holes(SCGCQ01231229)
 - Code review defect: create separate function for allocating RAID maps(SCGCQ01282924)
 - Removed Crusader ID(device ID- 0x0015) from supported PCI IDs of MR7.2 linux driver(SCGCQ01350963)
 - Updated OS to send page aligned SGEs by calling blk_queue_virt_boundary(SCGCQ01206279)
 - Use vmalloc followed by memset to zero instead of vzalloc in driver code.(SCGCQ01206316)
 - MR_ValidateMapInfo issue on bigendian platform (In some case Detect Ghost VDs)(SCGCQ01213952)
 - Fixed code review defects(SCGCQ01254323)
 - Removed code inside macros VD_EXT_DEBUG, SPAN_DEBUG and enahnce prints in OCR path(SCGCQ01270056)
 - FW fault happens as driver wrongly fill numSGE=0.(SCGCQ01274103)
 - Code optimization and enhanced prints for debugging(SCGCQ01224881)
 - Remove unsupported PCI Device IDs from the driver code(SCGCQ01234256)
 
 - Resolved conflict of PCI device ID-0x0015(SCGCQ01254317)
 - MR7.2: In megasas_issue_tm() SMID needs to be used for Task abort case only(SCGCQ01315252)
 - Save interfaceType for each sysPDs inside SCSI device's private data field which will persists until sysPD is removed/deleted.(SCGCQ01216464)
 - Code Optimization and enhanced prints(SCGCQ01223300)
 
 - MR 7.1: Linux OS crash when powering off enclosure during I/O(SCGCQ01229442)
 - Return pending IOs with status DID_REQUEUE instead of DID_RESET to SCSU layer before doing OCR(SCGCQ01231846)
 - MR7.2: Port changes from upstream to make in-house MR 7.2 code to be consistent with upstream code(SCGCQ01282321)
 - Add print for partially copied SCSI IO and fix few endianness issues(SCGCQ01224305)
 - Linux Driver 07.700.23.00/Getting megaraid_sas prints during startup of OS(SCGCQ01255074)
 - aen class range check to avoid kernel panic(SCGCQ01256126)
 - Corrected bitmap macros inside struct RAID_CONTEXT35(SCGCQ01269453)
 - Set cmd_status inside DCMD/IO/header frame to MFI_STAT_OK to wake up all pended IOCTLs.(SCGCQ01298582)
 - Fix few dev found issues(SCGCQ01226224)
 - On OEL SPARC (Big Endian), Linux MR 7.1 driver loading fails to initialize Ventura which has RDPQ support enabled(SCGCQ01229897)
 - Fixed few code collab defects/comments(SCGCQ01202237)
 - Remove throttle IOs prints in IO path and add sysfs parameter to reflect number of R1 FP writes(SCGCQ01204099)
 - Ventura MR-7.0.1 RHEL 7.2 driver: ERR messages when installing driver 7.700.20.00(SCGCQ01222990)
 - Use do_div() kernel API to do modulo operation of 64 bit dividend and 32bit divisor .(SCGCQ01243263)
 - megasas_complete_cmd_dpc_fusion() will be called with 1 sec delay inside function megasas_wait_for_outstanding_fusion(SCGCQ01256116)
 - Allocated MFI frame size and the size of MPT chain frame(Where MFI frame resides for MFI MPT passthru commands) should match(SCGCQ01342650)

 EnhancementRequests (17)
 - Big endian architecture is now support for Ventura generation of MR HBA.(SCGCQ01256016)
 - Fixed the problem of sync_irq not being called when MSI-x are disabled.(SCGCQ01206307)
 - Port changes from MR7.0 and MR6.13 critical fixes to MR7.1(SCGCQ01167939)
 - In megasas_build_ldio_fusion, code to set controller CPU affinity can be optimized(SCGCQ01216486)
 - Set device queue depth same as controller's can_queue for SCSI MQ mode(SCGCQ01271569)
 - Add SLES 11 32-bit build kit support to Ventura MR.(SCGCQ01214721)
 - Ported fixes from MR 6.13 to MR 7.1(SCGCQ01222522)
 - Added support for RHEL7.3(SCGCQ01224300)
 - Support SPARC/PPC/ARM (Big/Little Endian). Fix Endianess issue in MR Ventura driver.(SCGCQ01183275)
 - Added DCMD interface to read target properties for SCSI device(VDs and JBODs both)(SCGCQ01220142)
 - Added KMOD RPM support for OEL7.3 UEK.(SCGCQ01227476)
 - R1 Write IOPs improvement(SCGCQ01213232)
 - Extra code for bug in A0 ventura is removed. Optimized Descriptor write as Ventura required 32 bit in major IO Path operation.(SCGCQ01215347)
 - Remove Crusader device support from driver(SCGCQ01259175)
 - Don't re-issue Reset on the way back OCR(SCGCQ01215089)
 - Rework start_vm_build script used for VBAS build and new build infrastructure for DKMS RPMs(SCGCQ01261800)
-

Version 7.700.26.00- Moderate Impact/Low Probability of Occurrence
---------------------
Enhancement:
- Added support for ThinkSystem HBA and RAID.


Version 6.812.08.00 - Moderate Impact/Low Probability of Occurrence
---------------------
Fixes:
- Modified not to send outstanding IOs back to SML with DID_RESET host_byte but return IOs back with host_byte DID_REQUEUE before doing OCR. (SCGCQ01278656 Port Of Defect SCGCQ01231846)

Enhancement
- Added support for SLES 12.2

Version 6.812.07.00 - Moderate Impact/Low Probability of Occurrence
---------------------
Fixes
 - Changed timeout value for DCMDs get_bios_data and get_pd_info 180 seconds to keep it aligned with other DCMDs' timeout value. (SCGCQ00884247)
 - Do not allow MFI frame to be freed from DCMD fire context when already an OCR is in progress. (SCGCQ00879190)
 - Fixed an issue where driver always worked in non RDPQ mode even the running firmware did not support RDPQ. (SCGCQ00872542)
 - Moved SCSI layer interaction code out of reset_mutex in AEN thread to prevent deadlock around reset_mutex. (SCGCQ00868731)
 - Convert supported JBOD count value returned by firmware in CPU format and then use the same value for further validation (SCGCQ00837088)
 - Fixed an issue where unevenSpan configuration of R1 would not have proper load balancing for FP READ. SCGCQ00646224
 - Added timeout value for wait_event. (SCGCQ00249742)
 - Enabled hostlockless flag of SCSI host for RHEL6 and clones for async IO submission from SCSI mid layer. (SCGCQ00884242)
 - Fixed an issue where double freeing of MFI frame in case of MFI IO timeout in polled mode could occur. (SCGCQ00837932)
 - Added synchronization between OCR thread and AEN thread, so that there should not be any PCI write from AEN thread during OCR (SCGCQ00836410)
 - Added IO timeout value for SCSI management commands for JBOD. (SCGCQ00750452)
 - Fixed a JBOD performance issue due to incorrect MSI-x index set in request desc. (SCGCQ00619694)
 - Changed state machine of firmware crash dump collection to prevent file system on VD being set to Read-only mode after ECC error injection. (SCGCQ00608705)
 - Fixed an issue where incorrect messages such as LSI SAS2.0 were printed for MR driver. (SCGCQ00298201_
 - Fixed an issue where the driver sent an incorrect region type "REGION_LOCK_EXCLUSIVE" set to FW for RAID level >=5
 - Changed error handling for DCMD failure cases to allow graceful exit for not fatal errors. (SCGCQ00868661)
 - Free task management frame after dumping the task management reply frame data to ensure that TM reply frame will have valid data returned by firmware. (SCGCQ00860038)
 - Release reset_mutex inside OCR function, if adapter is already killed to prevent a kernel panic. (SCGCQ00857740)
 - Increased timeout to 180 seconds for flush cache and shutdown controller DCMDs to prevent kernel panic when DCMDs fired during driver's shutdown. (SCGCQ00841491)
 - Fixed an issue where traversed LDs at multiple places up to maximum 256 were limited to 64. (SCGCQ00652795)
  - Fixed an issue where the driver crashed when msix_disable=1 was passed to the boot time parameter. (SCGCQ00383508)
 - Fixed an issue where kernel panic seen while deleting VD and background IOs running. (SCGCQ00803468)
 - Fixed an issue where the driver was not sending DCMD- MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS after OCR. (SCGCQ00601138)
 - Fixed an issue where the kernel panicked inside PCI subsystem because of IRQs not freed before disabling MSI-X interrupts (SCGCQ00827403)
 - Disabled SED drive JBOD support. (SCGCQ00751296)
 - Fixed multiple OCRs triggering hits Exception Core issue (SCGCQ00707592)
- Fixed an issue where the firmware faulted due to invalid regionlock Flags set by Driver. (SCGCQ00796461)
- Fixed an issue where subsequent reads of state value from hardware resulted different values and could lead to a timeout in and a non working adapter. (SCGCQ00709216)
- Fixed an issue where Offline VD caused boot hangs in SLES 11 (SCGCQ00284564)
 - Disabled SPAN_DEBUG and set get_arm_from_strip to print if firmware supports UnevenSpan. (SCGCQ00365846)
 - Added check to validate ldcount exposed in firmware RAID map for legacy firmware.  If ldcount is more than 64, fail RAID map validation. (SCGCQ00820349)
 - Fixed an issue where the Linux kernel crashed when AEN and LD Sync commands were issued frequently. (SCGCQ00712031)
 - Fixed an issue where duplicate disk(s) were seen on controller after loading Linux driver during OS installation, (SCGCQ00568992)
 - Fixed an issue where kernel panic could occur at driver load time on 3.0 kernels (i.e. SLES11 SP2, SLES11SP3). (SCGCQ00561505)
 - Changed driver to return SCSI command back to mid layer if the controller has any critical hardware errors. SCGCQ00362023
 - Fixed an issue where the driver did not do Load balance for R1 READ due to wrong stats counters. (SCGCQ00677516 Port of Defect - SCGCQ00674872)
 - Fixed potential duplicate IOCinit frames being fired by VMware5 VF driver during OCR. (SCGCQ00571967 PORT OF SCGCQ00571679)
 - Fixed OS crash issue on SCSI IO timeout (SCGCQ00631210 PORT OF SCGCQ00625137)
 -Fixed an issue where the kernel panicked due to MFI/MPT pass-through command timeout and later finished from Interrupt context. (SCGCQ00307867 PORT OF - SCGCQ00302080)
 - Fixed an issue where megasas_poll_wait_aen was cleared before poll syscall returns causing to lose events (SCGCQ00575192 PORT OF SCGCQ00574787)
 -Fixed an issue where data corruption observed on JBODs while running IOs with 32k block size. (SCGCQ00530992 PORT OF SCGCQ00523780)
 - Fixed MPC kernel panic during chassis power cycle if AEN completes and detach is called before event workqueue runs. (SCGCQ00647390 PORT OF SCGCQ00645836)
 - Fixed an issue where kernel crashed in some cases, where megaraid_sas driver is loaded but controller is not present. (SCGCQ00282968 PORT OF SCGCQ00282067)


Enhancements:  
 - Set queue depth for syspD based on interface type (SCGCQ00879700)
 - Updated module Meta data (module description and module author) with Avago replacing LSI. (SCGCQ00801961)
 - Set OS provided timeout value for sysPD non read-write IOs (SCGCQ00764795)
 - Performance tuning for SMP affinity is implemented for distros's which support irq_set_affinity_hint API. (SCGCQ00623697)
 - Optimized OCR path to enable interrupt and make HBA OPERATIONAL after driver has fired LD_MAP_GET_INFO DCMD. (SCGCQ00768402)
 - Added module parameter to turn on/off SMP affinity code. (SCGCQ00666706)
 - Driver will do load balance for N Drive Raid 1 volumes. (SCGCQ00634064)
 -Functionality in driver is added to differentiate between iMR and MR at firmware initialization time. (SCGCQ00361244)
 - Uneven Span support added in Driver. (SCGCQ00319104)
 - Driver code is updated such way that it can work for any block size drive, if the rest of the system has proper support for the same. (SCGCQ00259244)
 - Implemented online controller reset if controller is not responding at driver load time. (SCGCQ00820389)
 - Added SCSI residual bytes support to the megaraid_sas Linux driver (SCGCQ00347089)
 - Use sequence number for JBOD FastPath I/Os to eliminate command block after drive replacement (SCGCQ00806534)
 - Big endian architecture support added for MR Linux driver (SCGCQ00526911)
 -  Driver support is added for 3108 C0 chip combine reply queue ON (SCGCQ00354586)
 - Added support 240 VD feature (SCGCQ00622703)
 - Added Firmware crash dump collection support (SCGCQ00550369)
 - Added support for large I/O 1MB transfer size (SCGCQ00816313)
 - Changed the max sg table size to 64. Old setting was 70 (SCGCQ00653992)
 - Added driver support for task management for Jbod or VD (tmCapable) (SCGCQ00854635)
 - Added support for SED JBOD in MR Linux driver (SCGCQ00711555)
 - Changed code to complete IOCtls posted just before a kill adapter so user space applications do not hang. (SCGCQ00759916)


Version 6.810.09.00 - Moderate Impact/Low Probability of Occurrence
---------------------
 Fixes:

 - Fixed an issue where deadlock may occur when the Automatic Event Notification thread runs in parallel with error handler thread (SCGCQ00911332, Port of SCGCQ00868731)

 - Fixed an issue where driver will operated in RDPQ mode regardless of whether firmware has advertised support or not (SCGCQ00872542)

 - Fixed an issue where system may reset with error "BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0" preceded by error "megasas: target reset FAILED!!" (SCGCQ00875223)

 - Fixed an issue where driver MFI frames could be freed twice (SCGCQ00879190)

 - Fixed an issue where some out-of-band commands had different timeouts than others (SCGCQ00884247)

 - Fixed an issue where performance was lower on async IO submissions from the SCSI mid layer (SCGCQ00884242)

 - Fixed an issue where a kernel panic may occur if the system is reset or fail to reboot (SCGCQ00859634, Port of SCGCQ00857740)

 - Fixed an issue where Task Management frames were not being dumped after the Tast Management Reply frame data (SCGCQ00860038)

 - Fixed an issue where a fatal error may occur when an out-of-band command times out during an Online Controller Reset (SCGCQ00882011, Port of SCGCQ00868661)

 - Fixed an issue where kernel may hang when many commands are timing out or many Automatic Event Notifications are being processed (SCGCQ00857245)

 - Fixed an issue where megaraid_sas module was not being included inside initrd/initramfs (SCGCQ00880965)

 - Fixed an issue where kernel may panic if driver does not setup IRQs for non-MSI-x interrupt mode (SCGCQ00870263, Port of SCGCQ00867873)

 - Fixed an issue where driver return code is based on command completion rather than command return code (SCGCQ00856103, Port of SCGCQ00856089)

 - Fixed an issue where Tape drives may not be detected by the Operating System (SCGCQ00914385, Port of SCGCQ00911702)

 - Fixed an issue where max_sectors per IO request may be set to more than firmware can handle (SCGCQ00917992, Port of SCGCQ00917399)
 
- Fixed an issue where an IERR may occurr on heavy IO with Failover (SCGCQ00864111, Port of SCGCQ00736612)
 
 
Enhancements:

 - Enhanced queue depths in driver for physical disks based on interface type (SCGCQ00879700)

 - Improved naming of internal functions (SCGCQ00866064)

 - Updated module parameter "rdpq_enable" default to "1" (enable RQPQ mode) (SCGCQ00871565)

 - Enhanced reply queue to support queue depth greater than 1K (SCGCQ00853521)

 - Added feature for driver to support Task Management for JBOD and Virtual Drives (SCGCQ00854635)

 - Added module parameter to disable 1M IO support and set default to enable 1M IO support (SCGCQ00911362)

 - Enhanced tasklet initialization so it would occur before setting up IRQs (SCGCQ00914393, Port of SCGCQ00911709)

 - Simplified HB handling for SR-IOV (SCGCQ00864113, Port of SCGCQ00700580)

 - Enhanced driver to update Online Controller Reset capability when it changes (SCGCQ00914389, Port of SCGCQ00908352)

 - Added feature to print Critical, Fatal and Dead firmware events into system logs (SCGCQ00868723, SCGCQ00882010, Port of SCGCQ00866176)

 - Enhanced HB handling to align with behavior on other Operating Systems (SCGCQ00864117, Port of SCGCQ00707323)

 - Removed excess dead code (SCGCQ00850012)

Version 6.808.16.00 - Moderate Impact/Low Probability of Occurrence
---------------------
Fixes:
- Fixed an issue where a deadlock may occur around reset_mutex when Automatic Event Notification threads run in parallel with error handlers - (SCGCQ00911332, Port of SCGCQ00868731)
- Fixed an issue where scanning of Tape drives does not occur depending on whether the drive state is set to systemPD or not - (SCGCQ00914385, Port of SCGCQ00911702)
- Fixed an issue where max_sectors may be set larger than what firmware can support - (SCGCQ00917992, Port of SCGCQ00917399)
- Fixed an issue where kernel may panic due to driver not setting up IRQs for non MSI-x interrupt mode - (SCGCQ00870263, Port of SCGCQ00867873)
- Fixed an issue where driver may halt firmware due to improper error handling for DCMD failure cases - (SCGCQ00882011, Port of SCGCQ00868661)
- Fixed an issue where driver may hang kernel due to deadlock - (SCGCQ00857245)
- Fixed an issue where system may crash due to timeout for flushing cache and shutting down controller DCMDs was not long enough - (SCGCQ00841491)
- Fixed an issue where deadlock may occur between Online Controller Reset and Automatic Event Notification processing function - (SCGCQ00846933)
- Fixed an issue where PCI writes from Automatic Event Notification thread were occurring during Online Controller Reset - (SCGCQ00836410)
- Fixed an issue where MFI frames linked list may corrupt due to double-freeing of frame in the case of an MFI IO timeout - (SCGCQ00837932)
- Fixed an issue where kernel may panic inside PCI subsystem due to IRQs not freed before disabling MSI-X interrupts - (SCGCQ00827403)
- Fixed an issue where ldcount was not validated for non-240VD firmware - (SCGCQ00820349)
- Fixed an issue where a command block would occur for JBODs with FastPath IOs after a drive is replaced - (SCGCQ00806534)
- Fixed an issue where 1MB IO support was not supported controller-wide - (SCGCQ00816313)

Enhancements:
- Set DMA alignment to 8 bytes for PI-enabled VDs - (SCGCQ00928796, Port of SCGCQ00928176)
- Added a parameter to support disabling 1MB IO support - (SCGCQ00911362)
- Added support for printing Critical, Fatal and Dead Firmware events into system logs - (SCGCQ00882010, Port of SCGCQ00866176)
- Added support for driver to perform an Online Controller Reset at driver load time if the controller is not responding - (SCGCQ00820389) 

Version 6.808.14.00 - Moderate Impact/Low Probability of Occurrence
---------------------
Fixes
- Fixed an issue where controller may reset or "MonTask: line 1276" error will occur with JBOD present (SCGCQ00837088)
- Fixed a performance issue on RAID1 with 256k IO size (SCGCQ00674872)
- Fixed a performance issue on RAID1 reads with FastPath enabled (SCGCQ00646224)
- Fixed an issue where an Online Controller Reset may take an unusually lon time (SCGCQ00420374)
- Fixed an issue where a controller firmware crash may not be recognized by driver (SCGCQ00249742)
- Fixed an issue where an MFI frame may be freed twice on MFI command timeout (SCGCQ00837932)
- Fixed an issue where the firmware may fault in an Automatic Event Notification fires during an Online Controller Reset before the chip is in READY state (SCGCQ00836410)
- Fixed an issue where there was no IO timeout value for SCSI management commands for Secure JBOD (SCGCQ00750452)
- Fixed a performance issue on SSDs in JBOD mode (SCGCQ00619694)
- Fixed an issue where file system on a VD can go to read-only on ECC error detection (SCGCQ00608705)
- Fixed an issue where disks may not be found during installation after loading the driver (SCGCQ00299643)
- Fixed an issue where a kernel panic may occur when cable pulled during system reboot (SCGCQ00841491)
- Fixed an issue where 240VD support was not fully implemented (SCGCQ00652795)
- Fixed an issue where the driver may crash if msix_disable=1 is passed to kernel as boot parameter (SCGCQ00383508)
- Fixed an issue where IO errors may occur when connected to a Tape drive (SCGCQ00399947)
- Fixed an issue where kernel may hang due to megaraid_sas driver deadlock (SCGCQ00857245)
- Fixed an issue where kernel may panic when deleting VD and background IO is occurring (SCGCQ00803468)
- Fixed an issue where crash dump may be disabled after an Online Controller Reset (SCGCQ00601138)
- Fixed an issue in 32bit OSs where driver may not load on boot (SCGCQ00362423)
- Fixed an issue where deadlock may occur (SCGCQ00846933)
- Fixed an issue where a kernel panic may occur because IRQs are not freed before disabling MSI-X interrupts (SCGCQ00827403)
- Fixed an issue where multiple Online Controller Resets can trigger a Core Exception (SCGCQ00707592)
- Fixed an issue where crash dump may not be performed properly (SCGCQ00593374)
- Fixed an issue where firmware may fault with CacheCade (SCGCQ00796461)
- Fixed an issue where adapter may hang (SCGCQ00709216)
- Fixed an issue where an offline VD may cause boot hangs (SCGCQ00284564)
- Fixed an issue where kernel may panic (SCGCQ00820349)
- Fixed an issue where kernel may crash in megaraid_sas driver with CacheCade if there are many Automatic Event Notifications and LD sync operations occurring (SCGCQ00712031)
- Fixed an issue where system may hang with CacheCade (SCGCQ00687881)
- Fixed an issue where the same disk may show multiple times in OS (SCGCQ00568992)
- Fixed an issue where kernel may panic on Linux kernels version 3.0 or greater (SCGCQ00561505)
- Fixed an issue where invalid IO statistics may be provided if driver supports more than just 512b sector drives (SCGCQ00282615)
- Fixed an issue where driver fails to reboot system due to outstanding IOs in SCSI mid-layer when controller is in error state (SCGCQ00362023)

Enhancements
- Added ability for JBOD IOs going via firmware path to use timeout value provided by OS (SCGCQ00764795)
- Added a retry of IO commands as LDIO if raid map sync is failed with MFI_STAT_CONFIG_SEQ_MISMATCH (SCGCQ00712510)
- Added support for 4k sector drives if the system supports it (SCGCQ00259244)
- Added support for driver to perform an Online Controller Reset if the controller is not responding (SCGCQ00820389)
- Fixed an issue where system may hang on S3 resume (SCGCQ00758933)
- Added a feature to prevent command block with FastPath after JBOD drive replacement (SCGCQ00806534)
- Enhanced 1MB IO support (SCGCQ00816313)
- Added support for "megaraid_sas.disable_ext_io=1" boot parameter to disable 1M IO support (SCGCQ00911362)
- Added support for Secure JBOD (SCGCQ00711555, SCGCQ00753765)
- Fixed an issue where user space applications may hang if IOCtl is sent prior a kill adapter issued (SCGCQ00759916)
- Fixed an issue where OS may crash on a SCSI IO timeout (SCGCQ00631210)
- Fixed an issue where system may fail to reboot or will kernel panic on init 6 if controller has faulted (SCGCQ00859634)
- Fixed an issue where firmware may fault (SCGCQ00702536)
- Fixed an issue where controller may crash during system power cycle (SCGCQ00647390)
- Fixed an issue where kernel may crash when megaraid_sas driver is loaded but no MegaRAID controllers are present (SCGCQ00282968)


Version 6.806.08.00 - Moderate Impact/Low Probability of Occurrence
-------------------
Fixes:
- Incorporated MegaRAID 6.6 x86/x86_64 Linux driver stream
- Fixed an issue where performance may drop in sequential read 256kb IO (SCGCQ00677516)
- Fixed an issue which may lead to firmware crash and "MonTask: line 1257 in file ../../raid/2108vI2o.c" error in firmware log (SCGCQ00702536)

Features/enhancements:
- Added a retry of IO commands as LDIO if raid map sync is failed with MFI_STAT_CONFIG_SEQ_MISMATCH (SCGCQ00651680)
- Added support for 1MB IO if the firmware supports it as well (SCGCQ00671670)
- Added ability to take a VD offline / bring a VD online, similar to the equivalent actions for PDs (SCGCQ00521610)
- Added support for Self-Encrypting Drives in JBOD mode (SCGCQ00399739)


Version 6.704.15.00 - Initial release
-------------------





Lenovo Data Center Group Linux OS Support Home Page
linux.lenovo.com

© 2018-2019 Lenovo. All rights reserved

LSI Storage Authority Software for windows and linux



LSI Storage Authority Software

Supported controllers:
  - ThinkSystem 430-8i PCIe 12Gb HBA
  - ThinkSystem 430-16i PCIe 12Gb HBA
  - ThinkSystem 430-8e PCIe 12Gb HBA
  - ThinkSystem 430-16e PCIe 12Gb HBA
  - ThinkSystem 430-8i SAS/SATA 12Gb Dense HBA
  - ThinkSystem RAID 930-8i 2GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 8GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-24i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-8e 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-4i 2GB Flash Flex Adapter
  - ThinkSystem RAID 730-8i 1GB Cache PCIe 12Gb Adapter
  - ThinkSystem RAID 730-8i 2GB Cache PCIe 12Gb Adapter
  - ThinkSystem RAID 730-8i 4GB Cache PCIe 12Gb Adapter  
  - ThinkSystem RAID 530-8i PCIe 12Gb Adapter
  - ThinkSystem RAID 530-8i Dense Adapter
  - ThinkSystem RAID 530-4i 4GB Flex Adapter
  - N2226 SAS/SATA HBA for Lenovo System x (00AE916)
  - N2225 SAS/SATA HBA for Lenovo System x (00AE912)	 
  - N2215 SAS/SATA HBA for Lenovo System x (47C8676)
  - ServeRAID M5215 SAS/SATA Controller for Lenovo System x (46C9110)
  - ServeRAID M1215 SAS/SATA Controller for Lenovo System x (46C9114)
  - ServeRAID M1210 SAS/SATA Controller for Lenovo System x  
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x880 X6 Compute Node
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x240 M5 Compute Node
  - ServeRAID M5225-2GB SAS/SATA Controller for Lenovo System x
  - ServeRAID M5210e SAS/SATA Controller for Lenovo System x
  - ServeRAID M5210 SAS/SATA Controller
Supported Operating Systems:
 - SLES 11 SP3/SP4, SLES 12/SP1/SP2/SP3/SP4,SLES 15
 - RHEL 6.7/6.8/6.9/7.1/7.2/7.3/7.4/7.5/7.6
 - Vmware  ESXi  6.5 U1,U2
 - Vmware ESXi ESXi 6.0 U1/U2/U3
 - Vmware ESXi 6.7

NOTE TO SERVICE - Reference RETAIN #N/A

004.189.000.000 - Moderate Impact
---------------

-(SCGCQ01351380) 
 - WG: Physical Drives tab should be aligned in center for Advanced Configuration.(SCGCQ01440777) 
 - Fixed: settings in configuration service API is inconsistent with other applciations(SCGCQ01518134) 
 - LSA WG Fury IT: Fury Device ID is showing as 00 instead of 0x0097 in controller properties logs.(SCGCQ01534444) 
 - SCGCQ01539326: [UNMAP]MR7.6 Unmap/WriteSame: AEN's are not generated when unmap capability gets disabled or enabled on a VD.(SCGCQ01539326) 
 - LSA Client 7.6: SPAN drives order is not maintained(SCGCQ01539355) 
 - Client: LSA should handle the not empty check for enclousre field for the physicalDevices response(SCGCQ01555968) 
 - IT-FURY-PH16:LSA-4.126.0.0-Fully Populated Enclosure S/N is "NA" and shown correctly after few drive removals.(SCGCQ01563352) 
 - SCGCQ01565134: IT-Ventura-PH7:LSA-4.126.0.0- FW update fails with error "File size Exceeds 16MB".(SCGCQ01565134) 
 - WG : Server detail is getting populated twice when user is using local IP (127.0.0.1(SCGCQ01565327) 
 - WG: During VD Creation on Simple Configuration, Clicking more than Once on the Finish Button is giving a Wrong Message.(SCGCQ01569262) 
 - WG: Copyright info is shown as 2017 instead of 2018(SCGCQ01571088) 
 - WG:Pop Up scroll missing in case there are more number of VDs to add while setting patrol read properties & Schedule CC(SCGCQ01571089) 
 - WG: User is notified to that multiselect PD/VD displays the properties but it is not supported(SCGCQ01571095) 
 - IT-FURY-PH16:LSA-SATA NCQ bit is always shown as disabled(SCGCQ01571261) 
 - LSA is not responding if online state is changed to offline(SCGCQ01571453) 
 - SCGCQ01571863: WG: LSA installation/uninstallation on linux does not notify the user on success or failure(SCGCQ01571863) 
 - Fixed: Windows OS details were reported as VMware details in Manual Search(SCGCQ01571874) 
 - WG: LSA wrapper indicates the progress of operations appears to be clickable while there is nothing user can select from list(SCGCQ01573087) 
 - SCGCQ01575706: WG:LSA installation exits on invalid option for selecting range of LSA events, it asks for retry with options listed again(SCGCQ01575706) 
 - SCGCQ01575999: FURY-PH16:LSA-Model Number is getting truncated for ST3000DM001,Hitachi HDS723020BLA642 models.(SCGCQ01575999) 
 - WG: the string 'status' is displayed multiple times after searching the server for manual addition(SCGCQ01577707) 
 - WG: LSA allows to replace HDD missing drive with SSD UG drive, fails with Partial Success.0 Successful;1 Failed notification(SCGCQ01577769) 
 - fixed: logout causing unexpected behavior during end cim connection for vmware systems(SCGCQ01578248) 
 - LSA Server: Removal of Additional Carriage Returns and Line feeds in tty log file(SCGCQ01579290) 
 - WG: Error message on a failed VD creation is displayed outside the allocated space(SCGCQ01586721) 
 - SCGCQ01588880:(SCGCQ01588880) 
 - LSA shows wrong diskgroup info when you have foreign PD(SCGCQ01590450) 
 - IPV6 IP is overlapping OS name and arch in LSA GUI if we see server discovery page in list view in SLES12 SP3(SCGCQ01595641) 
 - WG: LSA service crashes on trying to login with URI having incorrect mac address of the server(SCGCQ01601386) 
 -(SCGCQ01628332) 
 - fixed: Advanced Configuration is grayed out when there are 2 jbods available in the system.(SCGCQ01631267) 
 - Enclosure Location :Internal for back plane needs to be changed to "NONE" as part of new schema-24(SCGCQ01669558) 
 - LSA Schema 24: replace-missing get operation needs to follow the schema(SCGCQ01675460) 
 - Not able to set max no of PD using set patrol read properties in LSA/Storcli(SCGCQ01681070) 
 - WG: LSA 7.7 PA2 Not able to create RAID 00 VDs on iMR Ventura controller(SCGCQ01683638) 
 - When we try to modify the Unmap SCSI Unmap enabled feature via LSA it should give the reboot server message(SCGCQ01683938) 
 - During migration from r0(opal drives and non-secured) to r1, Add Pd list does not list the available drives (Greater/same si(SCGCQ01687072) 
 - WG: Issues pertaining to searching of the server : manual discovery in list view & GUI issues in the manual discovery panel(SCGCQ01687117) 
 - MR7.7_LSA: Unable to convert JBOD to UG when filesystem is present(SCGCQ01697980) 
 - LSA Linux doesn't have latest storelib(SCGCQ01713580) 
 - WG MR 7.7 PA2: LSA allows to add FDE and OPAL drives to create Encrypted volume(SCGCQ01721222) 
 - Server: LSA GUI Not Updating Security Key Info(SCGCQ01761801) 
 - Fixed: Delay in updating drive count in LSA due to slowness in asynchronous events(SCGCQ01761830) 
 - Fixed: nvme is allowed to mix with sas /sata(SCGCQ01762948) 
 - SCGCQ01763132: LSA: Alert Configuration response contains unsupported character(SCGCQ01763132) 
 - Foreign Config preview should show the VD details also(SCGCQ01788639) 
 - LSA Opal: RLM mixing for Opal SSC and Enterprise shouldn't be allowed when enableFDETypeMix=0(SCGCQ01790063) 
 - CC VD creation option is coming in LSA when the CC VD (SATA SSD) is in foreign config.(SCGCQ01817275) 
 - compilation error in server(SCGCQ01817434) 
 - Fixed: Auto Span Adjust with having >64 disks is not correct.(SCGCQ01827404) 
 - Lenovo 18D - missing display "Uninstall LSA" shortcut in the "Start Menu" under windows2016(SCGCQ01841473) 
 - LSA Not allowing to clear/Import foreign configuration.(SCGCQ01849749) 
 - SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon(SCGCQ01856350) 
 - LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01874487) 
 - MR API - Incorrect value used for MR_DCMD_CTRL_SNAPDUMP_ONDEMAND(SCGCQ01882581) 
 - WG: LSA shows incorrect popups while making the drive from offline to online & vice versa(SCGCQ01922610) 
 - LSA - Not able to import other foreign configs if user have SED drive which is in foreign(SCGCQ01937406) 
 - In JBOD personality LSA service getting stopped when user change JBOD to UG(SCGCQ01971368) 
 -(SCGCQ01542415) 
 - LSA 7.6:In gateway LSA, none of the servers are listed except Self server in Remote server discovery page in Rhel 7.4(SCGCQ01552654) 
 - Correcting the library version display, ini file contents and also the readme files contents.(SCGCQ01561849) 
 - LSA: Warning Message needs to be changed when there is Controller firmware update failure(SCGCQ01564526) 
 - SWR: Device ID is not displayed in LSA.(SCGCQ01564621) 
 - MR/IR: Controller Device ID value mismatch in LSA(SCGCQ01564622) 
 - WG:LSA and web server port have references of SLIM and nignx in notification if invalid ports are given during LSA installatn(SCGCQ01571099) 
 - WG: Issues pertaining to replace drive confirmation popup(SCGCQ01573101) 
 - Security related information should not be displayed in IR/IT for LSA(SCGCQ01577891) 
 - LSA allows user to assgin a 512 B drive as replacement to 4k missing drive in a DG(SCGCQ01591175) 
 - SCGCQ01593058: Add non printable character support for sata pd product id display(SCGCQ01593058) 
 - Add a provision to indicate VMware/NonVmware server in Manual Discovery Panel(SCGCQ01600706) 
 - LSA WG FURY IT: UEFI image download is failing in LSA(SCGCQ01616545) 
 - LSA 7.6 Server: LSA is showing the option for PD:"Undo Prepare For Removal", when the DG is in TR state(SCGCQ01618243) 
 - Not able to create secure VD with latest MR 7.7 LSA 177.000.000-SCGCQ01664972 but OK with previous version(SCGCQ01665121) 
 - Error observed while adding Windows gateway server in through manual discovery(SCGCQ01675601) 
 - Secure Jbod unlock is not showing the proper error message in LSA(SCGCQ01677101) 
 - LSA MR7.7 PA2: Previously cleared configuration is seen in presence of OPAL foreign drive in Jbod Mode.(SCGCQ01685488) 
 - WG MR7.7 PA2:Once the 69639 error code is seen in LSA, performing every valid operation fails until manual refresh is perfo(SCGCQ01686013) 
 - WG MR 7.7:There is no import option for GHS Foreign device in LSA(SCGCQ01698105) 
 - Fixed: LSA handle count increase was observed(SCGCQ01713154) 
 - Add physical Drives page is not consistent across (Advanced Configuration and Modify drive Group(SCGCQ01716606) 
 - LSA: Handle Opal drive scenario for Hotspare and replace drive(SCGCQ01719043) 
 - LSA client: Add support to show incompatible profiles details(SCGCQ01727270) 
 - Add SCSI Unmap property at PD level(SCGCQ01732785) 
 - WG MR 7.7 Alpha:Foreign configuration pane does not show details for foreign dedicated hotspare drive.(SCGCQ01745770) 
 - WG:[intermittent] LSA page goes blank if we click on Drive tab and then immediately click on view serer profile(SCGCQ01747490) 
 - WG MR 7.7 alpha:Lsa does not update the PD(part of r0 volume) status once the PD is made online from offline.(SCGCQ01752969) 
 - [CISCO][TR]"Clear Transport Ready" option on rebuild LD should be removed or greyed out in LSA(SCGCQ01753229) 
 - MR LSA 7.7 : When user has flashed the controller FW for IT card, reboot system message is disappearing within few seconds(SCGCQ01761269) 
 - WG MR 7.7 al:LSA allows to create simple configuration in presence of Unconfigured bad drive and rest of the drives in jbod(SCGCQ01763742) 
 - MR7.7: Removal of UNMAP support for JBOD(SCGCQ01813078) 
 - Not able to create PRL11 CC VD (using 4 SATA SSD PD) from LSA webGUI.(SCGCQ01822209) 
 - fixed: LSA fails to create RAID 10 with large number of drives(SCGCQ01833469) 
 - LSA does not ask for user confirmation for possible Data corruption while changing Pd state from "offline->online" .(SCGCQ01838943) 
 - WG: Software licensing agreement for linux RWC3 build is of Generic Channel(SCGCQ01886563) 
 - WG: LSA services crashes while adding the manually discovered VMware server to the manage server list(SCGCQ01918692) 
 -(SCGCQ01534450) 
 - LSA needs to change "Error code" : 86017, Description:Operation failed because of a resource reservation error" to proper mes(SCGCQ01556013) 
 - MR7.6_LSA: No Foriegn configuration details is shown in LSA(SCGCQ01581943) 
 - SCGCQ01582139: MR7.6_LSA: Enclosure ID and Device ID is shown blank in LSA event logs(SCGCQ01582139) 
 - WG: LSA Page auto scrolls down with scheduler wrapper going out of focus. LSA page would now be only half transparent(SCGCQ01586697) 
 - PH7 LSA WG Ventura: Sorting the drives on the basis of Device ID is not working fine(SCGCQ01587630) 
 - Fixed: Gateway crash when DA is logged in greater than max logins(SCGCQ01593855) 
 - WG: Instance validation failed for controller GET(SCGCQ01601458) 
 - WG: Minor text changes to be made in user information when no rows are selected in PD tab / DG tab / other hardware tab(SCGCQ01601656) 
 - [CISCO][TR] LSA fails to show DG in TR state after system reboot -storCLI OK(SCGCQ01615856) 
 - Enclosure Location :Internal for back plane needs to be changed to "NONE" as part of new schema-24(SCGCQ01638193) 
 - SCGCQ01680714: WG:Memory leak issues when the system is not idle ( Running the GUI suite when the memory leak test is in progress(SCGCQ01680714) 
 - LSA Wont display foreign data when enclosure information in not populated properly(SCGCQ01685449) 
 - WG MR 7.7:Invalid Temperature is displayed for OPAL drives.(SCGCQ01686024) 
 - Instant Secure Erase does not work in VMware when schedule is enabled(SCGCQ01686028) 
 - MR7.7_LSA: Error code:0 is observed when driver security is changed in LSA(SCGCQ01686050) 
 - LSA is not showing the proper message when user unlocks the foreign jbod drivesin JBOD mode(SCGCQ01716622) 
 - fixed: max pd is a bigger number than the actual allowed max pd per raid level(SCGCQ01746200) 
 - WG MR 7.7 alpha: LSA displays wrong connector & path info for drives when enclosure is connected in wide port (x8 connection(SCGCQ01764794) 
 - WG: gateway system is not discovering systems with different web port number in remote discovery page.(SCGCQ01788630) 
 - LSA does not update the VD status when Migration is performed from r5(3drives)to r1(2drives)(SCGCQ01803743) 
 - LSA 502 Bad gateway is seen when Prepare for removal is performed on 5 drives at a time.(SCGCQ01809413) 
 - LSA : Stale entries are coming in DG tab when the VD (failed) is in foreign config.(SCGCQ01818953) 
 - fixed: Info "1920 more drives can be added" need to change in LSA(SCGCQ01827401) 
 - The display wrong location in page(SCGCQ01836732) 
 - SCGCQ01355833: WG:After deleting the cookies from browser, DA does not go back to login page.(SCGCQ01355833) 
 - WG: Changing the drive security key with invalid authentication key results in notification that is not in format(SCGCQ01573090) 
 - WG: Raid 00 DG having missing drives Span list dissapears when user tries to sort the drives based on capacity(SCGCQ01577833) 
 - MR 7.7: LSA did not allow to pick all SED/FDE but OK to pick one by one when create secure VD(SCGCQ01629062) 
 - SCGCQ01718994: LSA needs to convert "Error Code:69637. Descrption:Partial Success.0 Successful;1 Failed" into a readable message.(SCGCQ01718994) 
 - When there is pending personality, do not allow behavior Mode change, GUI refresh issue(SCGCQ01731312) 
 - Assign DHS is not showing any message in failure case(SCGCQ01732485) 
 - To enable the Alarm user has to click on the bottom of checkbox(SCGCQ01740783) 
 - LSA : GUI tab alignment is not coming proper after user initiates manual learn cycle for Supercap(SCGCQ01818960) 
 - LSA:fw error "BAIL_OUT at line 2909",FDE drive filtering for creating Encrypted RAID0 volumes lists non-FDE drives(SCGCQ01850008) 
 - LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01876091) 
 - LSA needs to convert "Error Code:69637. Descrption:Partial Success.0 Successful;1 Failed" into a readable message.(SCGCQ01533554) 
 - WG: change Behavior Mode From JBOD to None is Not Working until closing the window(SCGCQ01635541) 
 - WG MR7.7PA2:In Jbod mode after first reboot and after converting Jbod to UG, advance configuraton leads to Jbod table.(SCGCQ01683001) 
 - MR 7.7 PA2: LSA does not refresh DG icon when PDs are made offline to online and visa versa.(SCGCQ01686029) 
 - WG MR 7.7 PA2:Encrypted Opal drive VD supports the Opal drive replacement with FDE drive(SCGCQ01697265) 
 - WG: JBOD conversion popup appears multiple times after converting all the drives to UG and clicking on Continue button(SCGCQ01737550) 
 - MR 7.7 alpha: LSA displays raid 1 as raid 1E when created using 4 drives.(SCGCQ01764771) 
 - SCGCQ01564386: IT-FURY-PH16:Drives are not listed under Enclosures ( "0" drives) under other Hardware if connected in Multipath.(SCGCQ01564386) 
 - Coverity Defect fix in 7.7 Stream(SCGCQ01682365) 
 - WG MR 7.7:Invalid Temperature is displayed for OPAL drives.(SCGCQ01714415) 
 - Client changes for defect SCGCQ01629703(SCGCQ01714659) 
 - MR7.7_LSA: After disabling PR, PR properties shows next scheduled time(SCGCQ01718119) 
 - LSA does not give expand option to perform OCE when one among 2vds is deleted under a DG(SCGCQ01803722) 
 - LSA is not locating all drives correctly(SCGCQ01924674) 
 - WG: LSA page doesnt show any notification on time consuming response operations,would lead to user redoing same again(SCGCQ01515496) 
 - WG: Email setting tab heading of LSA displays the entire sentence with "_" in between instead of space(SCGCQ01563343) 
 - Security Key Confirm Text box should not accept the copy of anything(SCGCQ01629574) 
 - Fixed: Show Advanced Config menu only if Unconfigured UG is present(SCGCQ01629703) 
 - WG: Readme shows wrong Version of LSA in html\files\LSA_ReadMe\LSA_Readme(SCGCQ01822525) 
 - SCGCQ01822561: WG: Changed LSA port is not listed after Direct agent installation on Rhel(SCGCQ01822561) 
 - Fixed: unblock LSA login on ESXi 6.7 U1(SCGCQ01866289) 
 - Linux system is getting IPV6 by default & it is not taking private IPV4 range(10 series) in LSA main page.(SCGCQ01817305) 
 - Making rebuild drive offline lsa gets 404.(SCGCQ01564627 port of SCGCQ01542412) 
 - LSA should display proper message for ESXi after LBP/Talladega firmware upgrade/downgrade(SCGCQ01564633 port of SCGCQ01562368) 
 - LSA Crashes after clicking on foreign configuration(SCGCQ01564739 port of SCGCQ01545262) 
 - LSA WG Fury IT: Fury Device ID is showing as 00 instead of 0x0097 in controller properties logs.(SCGCQ01564943 port of SCGCQ01534444) 
 - Modify the LSA Health Algorithm to consider the Blocked VD(SCGCQ01565025 port of SCGCQ01504080) 
 - LSA 7.6:LSA does not provide the Stop rebuild option in the action pane once the rebuild operation is in progress in Rhel 7.4(SCGCQ01565116 port of SCGCQ01555955) 
 - LSA should display proper message for ESXi after LBP/Talladega firmware upgrade/downgrade(SCGCQ01566088 port of SCGCQ01562368) 
 - WG: No success or failure notification is shown on enabling the JBOD drive security(SCGCQ01566435 port of SCGCQ01511274) 
 - SCGCQ01545384: Installation of LSA with LWM option is showing installation_type = 0, in the LSA.conf file(SCGCQ01567110 port of SCGCQ01545384) 
 - Modify the LSA Health Algorithm to consider the Blocked VD(SCGCQ01569267 port of SCGCQ01504080) 
 - Making rebuild drive offline lsa gets 404.(SCGCQ01569465 port of SCGCQ01542412) 
 - Schema -23 is not upto date with the Mark/Replace Missing feature(SCGCQ01569474 port of SCGCQ01539349) 
 - LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n(SCGCQ01569949 port of SCGCQ01563340) 
 - LSA WG Inturder IT: 0 Byte drive is missing after sorting the drives based on capacity of drive.(SCGCQ01570203 port of SCGCQ01550970) 
 - Enclosure's physicaldevices URI getting failed with 405 error(SCGCQ01589492 port of SCGCQ01523122) 
 - Label of the user menu drop down should change reinforcing that selection worked.(SCGCQ01597876 port of SCGCQ01493942) 
 - LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n(SCGCQ01599402 port of SCGCQ01563340) 
 - Version changes for LSA 4.129 common project(SCGCQ01601148 port of SCGCQ01601146) 
 - WG:Once the Controller is moved from Raid to JBOD all the drives are counted as drive group(SCGCQ01601603 port of SCGCQ01598515) 
 - LSA: Warning Message needs to be changed when there is Controller firmware update failure(SCGCQ01604992 port of SCGCQ01564526) 
 - MR7.6_LSA: No Foriegn configuration details is shown in LSA(SCGCQ01605344 port of SCGCQ01581943) 
 - fixed: logout causing unexpected behavior during end cim connection for vmware systems(SCGCQ01609343 port of SCGCQ01578248) 
 - SCGCQ01355833: WG:After deleting the cookies from browser, DA does not go back to login page.(SCGCQ01614982 port of SCGCQ01355833) 
 - IPV6 IP is overlapping OS name and arch in LSA GUI if we see server discovery page in list view in SLES12 SP3(SCGCQ01616555 port of SCGCQ01595641) 
 - LSA displays "Erase operation is successful" when replace operation is in progress on the drive in same drive group.(SCGCQ01617930 port of SCGCQ01401460) 
 - Modify the LSA Health Algorithm to consider the Blocked VD(SCGCQ01628354 port of SCGCQ01504080) 
 - WG:Instance Validation Fails for foreignConfiguration-schema.json in iMR_Ventura(SCGCQ01634072 port of SCGCQ01473733) 
 - WG: few of the alert params have the missing controller ID tag for the events(SCGCQ01635756 port of SCGCQ01625923) 
 - LSAServer: Use scheduler call for heavy operations for performance improvement - PD Operations(SCGCQ01635765 port of SCGCQ01514283) 
 - WG: though the hotspare button will be disabled after adding VD for a Raid 1 DG, the hand cursor button appears(SCGCQ01635778 port of SCGCQ01626738) 
 -(SCGCQ01639457 port of SCGCQ01599526) 
 - MR7.6: LSA crashed with a mouse click on VD(SCGCQ01685343 port of SCGCQ01641760) 
 - Raid 1 Volume creation using 4 drives is displayed as Raid 1E(SCGCQ01686231 port of SCGCQ01686106) 
 - LSA detects secured JBODs as unconfigure good when drives moved to another system -StorCLI detects them as foreign config(SCGCQ01687172 port of SCGCQ01686080) 
 - When we try to modify the Unmap SCSI Unmap enabled feature via LSA it should give the reboot server message(SCGCQ01697468 port of SCGCQ01683941) 
 - LSA fails to flash GPMR2 package 50.1.0-1048 on top of MR 7.6 package 50.6.0-1255 on first try-it is successful on 2nd try(SCGCQ01697485 port of SCGCQ01680521) 
 - LSA not showing the proper time stamp in the schedule PR page(SCGCQ01698028 port of SCGCQ01677008) 
 - WG: LSA page doesnt show any notification on time consuming response operations,would lead to user redoing same again(SCGCQ01719179 port of SCGCQ01515496) 
 -(SCGCQ01733306 port of SCGCQ01721811) 
 - Fixed: LSA handle count increase was observed(SCGCQ01742153 port of SCGCQ01713154) 
 - Cannot use Special Characters in Domain Name for LSA Login(SCGCQ01747012 port of SCGCQ01745768) 
 - Server schema validation is failing(SCGCQ01764913 port of SCGCQ01619401) 
 - Enclosure Location :Internal for back plane needs to be changed to "NONE" as part of new schema-24(SCGCQ01764928 port of SCGCQ01638193) 
 - LSA installation failed on SLES15(SCGCQ01784699 port of SCGCQ01760620) 
 - LSA needs proper message for max config import(SCGCQ01789100 port of SCGCQ01763411) 
 - Cannot use Special Characters in Domain Name for LSA Login(SCGCQ01789161 port of SCGCQ01745768) 
 - WG: LSA allows user to replace a drive of a DG with drive on which drive clear is already in progress, GUI issues in popup(SCGCQ01810649 port of SCGCQ01803341) 
 - MR7.7: Removal of UNMAP support for JBOD(SCGCQ01813086 port of SCGCQ01813078) 
 - LSA detects secured JBODs as unconfigure good when drives moved to another system -StorCLI detects them as foreign config(SCGCQ01816649 port of SCGCQ01686080) 
 - C480-M5: LSA downloaded event log needs better decoding(SCGCQ01828830 port of SCGCQ01321211) 
 - LSA-4.1 : Array details are shown in LSA for the partial foreign config .(SCGCQ01850405 port of SCGCQ01818828) 
 - Tape drive state is blank when connected with 9400-8E card from LSA drives tab(SCGCQ01851980 port of SCGCQ01851906) 
 - LSA Not allowing to clear/Import foreign configuration.(SCGCQ01860933 port of SCGCQ01849749) 
 - LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01880125 port of SCGCQ01874487) 
 - LSA : GUI tab alignment is not coming proper after user initiates manual learn cycle for Supercap(SCGCQ01897266 port of SCGCQ01818960) 
 - LSA does not ask for user confirmation for possible Data corruption while changing Pd state from "offline->online" .(SCGCQ01898344 port of SCGCQ01838943) 
 - fixed: LSA fails to create RAID 10 with large number of drives(SCGCQ01901767 port of SCGCQ01833469) 
 - Fixed: unblock LSA login on ESXi 6.7 U1(SCGCQ01901774 port of SCGCQ01866289) 
 - OPAL drives fail to import when entering wrong security key then right security key after power cycle(SCGCQ01915861 port of SCGCQ01905192) 
 - [CISCO]LSA shows previously set security key (M3g@raid(SCGCQ01921581 port of SCGCQ01878346) 
 - LSA fails to start initialization on EPD if it has DDF(SCGCQ01921583 port of SCGCQ01849522) 
 - SCGCQ01829895: LSA uninstaltion is not working in SLES15 OS.(SCGCQ01921592 port of SCGCQ01829895) 
 -(SCGCQ01921684 port of SCGCQ01841361) 
 - MR7.8 Foreign import from 7.7 to 7.8 with unmap VD and non unmap DHS does not alert user with a critical message/event(SCGCQ01921836 port of SCGCQ01876230) 
 - WG:Instance Validation Fails for foreignConfiguration-schema.json in iMR_Ventura(SCGCQ01538488 port of SCGCQ01473733) 
 -(SCGCQ01564591 port of SCGCQ01515389) 
 - WG: System display uniformity is not there in GUI (Remote server discovery(SCGCQ01567177 port of SCGCQ01553588) 
 - Client: Handle Enable/Disable style for search Button(SCGCQ01567216 port of SCGCQ01539573) 
 - LSA Crashes after clicking on foreign configuration(SCGCQ01567307 port of SCGCQ01545262) 
 - Manual discovery of servers(SCGCQ01569264 port of SCGCQ01539471) 
 - Modify the LSA Health Algorithm to consider the Blocked VD(SCGCQ01569569 port of SCGCQ01504080) 
 - LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n(SCGCQ01570076 port of SCGCQ01563340) 
 - Converting the JBOD Pds to Unconfigured good PD during VD creation VD creation(SCGCQ01597581 port of SCGCQ01518204) 
 - Manual discovery of servers(SCGCQ01600837 port of SCGCQ01539471) 
 - LSA 7.6:In gateway LSA, none of the servers are listed except Self server in Remote server discovery page in Rhel 7.4(SCGCQ01615020 port of SCGCQ01552654) 
 - WG: LSA service crashes on trying to login with URI having incorrect mac address of the server(SCGCQ01615042 port of SCGCQ01601386) 
 -(SCGCQ01633836 port of SCGCQ01599526) 
 - Fixed: Gateway crash when DA is logged in greater than max logins(SCGCQ01635183 port of SCGCQ01593855) 
 - Use schedular call for heavy operations for performance imporvement(SCGCQ01635665 port of SCGCQ01506032) 
 - Allow individual element's properties download - VD / PD / DG / BBU / Server profile(SCGCQ01635761 port of SCGCQ01518113) 
 - JBOD Mode : WG: Even after clicking Convert JBOD the JBOD conversion page does not refresh with updated list(SCGCQ01635784 port of SCGCQ01617721) 
 - Cisco - CSCvi55512 - CC in concurrent mode runs only on 2 VDs at a time(SCGCQ01676612 port of SCGCQ01670094) 
 - Cisco - CSCvi55512 - CC in concurrent mode runs only on 2 VDs at a time(SCGCQ01676732 port of SCGCQ01670094) 
 -(SCGCQ01685548 port of SCGCQ01685009) 
 - LSA Wont display foreign data when enclosure information in not populated properly(SCGCQ01686054 port of SCGCQ01685449) 
 - LSA detects secured JBODs as unconfigure good when drives moved to another system -StorCLI detects them as foreign config(SCGCQ01687173 port of SCGCQ01686105) 
 - fixed: WG: managing the manually added server fails : windows(gateway(SCGCQ01697195 port of SCGCQ01682360) 
 - LSA is not showing the proper message when user unlocks the foreign jbod drivesin JBOD mode(SCGCQ01716641 port of SCGCQ01716622) 
 -(SCGCQ01718985 port of SCGCQ01698211) 
 - Security Key Confirm Text box should not accept the copy of anything(SCGCQ01788477 port of SCGCQ01629574) 
 - LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01880123 port of SCGCQ01876091) 
 - handling the session management(SCGCQ01892868 port of SCGCQ01829897) 
 - Change tools to report drives attached to HBAs as JBOD instead of UGOOD(SCGCQ01898263 port of SCGCQ01802344) 
 - Fixed: Auto Span Adjust with having >64 disks is not correct.(SCGCQ01901754 port of SCGCQ01827404) 
 - LSA 7.8:LSA provides Instant secure erase option for Locked UG BAD drives.(SCGCQ01904075 port of SCGCQ01893304) 
 - LSA 7.8: Unable to launch LSA from different web server port after LSA upgrade.(SCGCQ01904345 port of SCGCQ01901758) 
 -(SCGCQ01920699 port of SCGCQ01808698) 
 - LSA: Ventura B0: BIOS Flashing Failure Observed in EFI Storcli and Multiple Tries Causes UART Unresponsive(SCGCQ01921839 port of SCGCQ01829669) 
 - SCGCQ01803373: WG: LSA service crashes on downloading support logs in case of Linux 64 bit OS(SCGCQ01921842 port of SCGCQ01803373) 
 - WG: LSA does not notify user on OS VD present if multiple VDs are selected and with non OS VD is selected first(SCGCQ01928961 port of SCGCQ01926674) 
 - LSA Server: Populate the Drive Sector Size while reading the LD MFI command(SCGCQ01930623 port of SCGCQ01926876) 
 - Schema -23 is not upto date with the Mark/Replace Missing feature(SCGCQ01557738 port of SCGCQ01539349) 
 - LSA WG Inturder IT: 0 Byte drive is missing after sorting the drives based on capacity of drive.(SCGCQ01564629 port of SCGCQ01550970) 
 - SCGCQ01547992: WG: standalone LSA Installation on Rhel 6.9 32 bit notifies user with invalid message(SCGCQ01564682 port of SCGCQ01547992) 
 - I/Os are not recover after drives pull for DHSP to rebuild.(SCGCQ01569579 port of SCGCQ01514206) 
 - Support from LSA back-end to allow JBODs to be converted to UG for advance VD creation(SCGCQ01597602 port of SCGCQ01519271) 
 - WG:On changing behavior from None to JBOD and moving to Controller Console page, LSA page redirects to Personality management(SCGCQ01670841 port of SCGCQ01629821) 
 - [CISCO][TR] LSA fails to show DG in TR state after system reboot -storCLI OK(SCGCQ01676281 port of SCGCQ01615856) 
 - Server schema validation is failing(SCGCQ01676389 port of SCGCQ01619401) 
 - WG: Email setting tab heading of LSA displays the entire sentence with "_" in between instead of space(SCGCQ01679003 port of SCGCQ01563343) 
 - Secure Jbod unlock is not showing the proper error message in LSA(SCGCQ01680728 port of SCGCQ01677101) 
 - LSA taking more time to discover VMWare servers(SCGCQ01681092 port of SCGCQ01681069) 
 -(SCGCQ01697478 port of SCGCQ01685009) 
 - LSA is not showing the proper message when user unlocks the foreign jbod drivesin JBOD mode(SCGCQ01716625 port of SCGCQ01716622) 
 -(SCGCQ01718980 port of SCGCQ01698211) 
 -(SCGCQ01749087 port of SCGCQ01698211) 
 - Modify Properties option is enabled for VDs which are part of Transport Ready Drive Group(SCGCQ01764894 port of SCGCQ01763056) 
 - Fixed: Delay in updating drive count in LSA due to slowness in asynchronous events(SCGCQ01826237 port of SCGCQ01761830) 
 - The LSA is failing to take into account current USED PDs from another configured VD during next VD creation(SCGCQ01837378 port of SCGCQ01833791) 
 - SCGCQ01841280: Before importing foreign CC VD, model number of SSD is not coming in LSA(SCGCQ01851919 port of SCGCQ01841280) 
 - SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon(SCGCQ01856730 port of SCGCQ01856350) 
 - WG: VMware server takes too long to discover in remote discovery page : nearly 20 minutes(SCGCQ01891168 port of SCGCQ01889547) 
 - CC VD creation option is coming in LSA when the CC VD (SATA SSD(SCGCQ01897144 port of SCGCQ01817275) 
 - Update the Windows Server 2019 OS name in LSA(SCGCQ01897178 port of SCGCQ01866322) 
 -(SCGCQ01920924 port of SCGCQ01818618) 
 - SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon(SCGCQ01921819 port of SCGCQ01856350) 
 - LSA 7.6 Client: Cosmetic replace drive selection issue(SCGCQ01566455 port of SCGCQ01539347) 
 - SCGCQ01539326: [UNMAP]MR7.6 Unmap/WriteSame: AEN's are not generated when unmap capability gets disabled or enabled on a VD.(SCGCQ01567176 port of SCGCQ01539326) 
 - WG: Alignment in Remote Server Discovery page changes when it is in List view and filtered with any one of the OS type.(SCGCQ01567193 port of SCGCQ01471834) 
 - SCGCQ01538253: LSA-4.055.0.0: IT-Cutlass- LSA Event logs is missing Enclosure ID's and slot-36 is shown to be present in(SCGCQ01569137 port of SCGCQ01538253) 
 - SCGCQ01538253: LSA-4.055.0.0: IT-Cutlass- LSA Event logs is missing Enclosure ID's and slot-36 is shown to be present in(SCGCQ01569138 port of SCGCQ01538253) 
 - LSA WG Fury IT: Controller type is showing as IR for IT card(SCGCQ01569488 port of SCGCQ01540821) 
 - Client:Allow individual element's properties download - VD / PD / DG / BBU / Server profile(SCGCQ01597592 port of SCGCQ01518206) 
 - WG:Once the Controller is moved from Raid to JBOD all the drives are counted as drive group(SCGCQ01601608 port of SCGCQ01598515) 
 - WG: empty details for policy change displayed in events "Previous = Current Write Policy: Now = Current Write Policy:"(SCGCQ01635759 port of SCGCQ01625912) 
 - WG:On changing behavior from None to JBOD and moving to Controller Console page, LSA page redirects to Personality management(SCGCQ01635779 port of SCGCQ01629821) 
 - TR VD should be excluded from the PR VD list(SCGCQ01677110 port of SCGCQ01677062) 
 - Implemented: Allow mixing of nvme drives to be mixed with SATA/SAS drives(SCGCQ01697042 port of SCGCQ01697026) 
 - Hercules : Snap 4 : Alpha : LSA provides option of performing an RLM operation on Degraded VD, which fails(SCGCQ01789156 port of SCGCQ01731931) 
 - MR7.6: LSA crashed with a mouse click on VD(SCGCQ01816428 port of SCGCQ01641760) 
 - Handling the set text mechanism in client(SCGCQ01886532 port of SCGCQ01850387) 
 - Lenovo 18D - missing display "Uninstall LSA" shortcut in the "Start Menu" under windows2016(SCGCQ01897181 port of SCGCQ01841473) 
 - WG: LSA provides option of Secure using FDE if non encrypted r1 VD with secure drive is assigned with DHSP,(SCGCQ01915812 port of SCGCQ01906914) 
 - LSA 7.8:Import option is given for the Incomplete foreign VD(SCGCQ01921678 port of SCGCQ01865420) 
 - LSA is allowing to delete OS VD.(SCGCQ01921689 port of SCGCQ01873420) 
 - SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon(SCGCQ01921919 port of SCGCQ01856350) 
 - WG: VMware server takes too long to discover in remote discovery page : nearly 20 minutes(SCGCQ01961510 port of SCGCQ01889547) 
 - Not able to set max no of PD using set patrol read properties in LSA/Storcli(SCGCQ01697480 port of SCGCQ01681070) 
 - Add Virtual Drive option is available for DGs with Transport Ready feature set(SCGCQ01764885 port of SCGCQ01763052) 
 - SCGCQ01538253: LSA-4.055.0.0: IT-Cutlass- LSA Event logs is missing Enclosure ID's and slot-36 is shown to be present in(SCGCQ01828400 port of SCGCQ01538253) 
 - Fixed: Crash when pressing back button after logout(SCGCQ01892905 port of SCGCQ01865309) 
 - Remove un printable characters from LSA log(SCGCQ01901769 port of SCGCQ01901760) 
 - LSA does not show Secure Erase option for foreign secured JBOD drive-CLI works(SCGCQ01920701 port of SCGCQ01916249) 
 - WG: LSA allows to remove the data drive during the RLM from single drive R0 and allows migrate to R0 with no drives(SCGCQ01921580 port of SCGCQ01823858) 
 - Modify the LSA Health Algorithm to consider the Blocked VD(SCGCQ01565119 port of SCGCQ01504080) 
 - LSA 7.6:LSA does not provide the Stop rebuild option in the action pane once the rebuild operation is in progress in Rhel 7.4(SCGCQ01569761 port of SCGCQ01555955) 
 - Unable to import foreign secured VDs with different security key(SCGCQ01731357 port of SCGCQ01670139) 
 - Activity to check-in Auto-BST files to 7.8 streams(SCGCQ01794950 port of SCGCQ01793057) 
 - Activity to check-in Auto-BST files to 7.8 streams(SCGCQ01817915 port of SCGCQ01793057) 
 - SCGCQ01829895: LSA uninstaltion is not working in SLES15 OS.(SCGCQ01869566 port of SCGCQ01829895) 
 - Server: LSA GUI Not Updating Security Key Info(SCGCQ01897099 port of SCGCQ01761801) 
 - LSA WG Fury IT: Controller type is showing as IR for IT card(SCGCQ01564631 port of SCGCQ01540821) 
 - LSA Schema 24: replace-missing get operation needs to follow the schema(SCGCQ01679329 port of SCGCQ01675460) 
 - LSA shows wrong diskgroup info when you have foreign PD(SCGCQ01698150 port of SCGCQ01590450) 
 - LSA needs proper message for max config import(SCGCQ01813925 port of SCGCQ01764977) 
 - UG LSA 7.8 PA2:Incomplete foreign VD is seen when Clear foreign config is performed.(SCGCQ01851155 port of SCGCQ01849681) 
 - Fixed: Advance configuration operation should be greyed out if max pds are already configured(SCGCQ01922015 port of SCGCQ01850445) 
 - I/Os are not recover after drives pull for DHSP to rebuild.(SCGCQ01564737 port of SCGCQ01514206) 
	
EnhancementRequests:
 - Add "Replace Missing Drive" feature to LSA(SCGCQ01399204) 
 - Part 2 of 2: Support TCG Opal 2.0 via SafeStore for VDs and SystemPD (Legacy JBOD) in RAID Mode and JBOD/SDS Modes(SCGCQ01599762) 
 -(SCGCQ01740789) 
 - Added customer serial number field to MFC Manufacturing 2 structure(SCGCQ01873417) 
 - MR API changes to support EKMS over OOB(SCGCQ01874035) 
 - Add new error code for tampered or invalid controller(SCGCQ01885686) 
 - Interrupt coalsecing setting per group of 8 replies queues (h/w VF registers(SCGCQ01886424) 
 - [MR 7.8] API change to export "disable least latency mode"(SCGCQ01887495) 
 - HDET: Support smp passthrough storeliboob (API changes requirement(SCGCQ01916035) 
 - Add secure boot key update complete event(SCGCQ01928254) 
 - Add Board Support Package Image Type to MR_IMAGE_TYPE(SCGCQ01931637) 
 - Support dynamically add/remove controller in Storelib IT for MCTP over PCIe(SCGCQ01934815) 
 - Fix MR_CTRL_INFO to support backward compatibility(SCGCQ01946548) 
 - Add "Replace Missing Drive" feature to LSA(SCGCQ01399205) 
 - Manually add server details to the list of servers(SCGCQ01539514) 
 - Switch attached NVMe HW RAID support for Supermicro backplanes(SCGCQ01740787) 
 - LSA displays "Erase operation is successful" when replace operation is in progress on the drive in same drive group.(SCGCQ01401460) 
 - UNMAP/TRIM/WRITESAME for NVMe devices for R0/EPD/JBOD(SCGCQ01746609) 
 - Manual discovery of servers(SCGCQ01539471) 
 - Change tools to report drives attached to HBAs as JBOD instead of UGOOD(SCGCQ01802344) 
 -(SCGCQ01599763) 
 - UNMAP/TRIM/WRITESAME for NVMe devices for R0/EPD/JBOD(SCGCQ01746608) 

004.069.000.000  - Moderate Impact
--------------- 
Defects (20)
-.(SCGCQ01753405)
- Server: LSA GUI Not Updating Security Key Info.(SCGCQ01761801)
- CC VD creation option is coming in LSA when the CC VD (SATA SSD) is in foreign config.(SCGCQ01817275)
- Fixed: Auto Span Adjust with having >64 disks is not correct.(SCGCQ01827404)
- Lenovo 18D - missing display "Uninstall LSA" shortcut in the "Start Menu" under windows2016.(SCGCQ01841473)
- LSA Not allowing to clear/Import foreign configuration.(SCGCQ01849749)
- SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon.(SCGCQ01856350)
- LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01874487)
- seg fault is seen when when we try to generate CRC errors using megamon.(SCGCQ01841619)
- Not able to create PRL11 CC VD (using 4 SATA SSD PD) from LSA webGUI.(SCGCQ01822209)
- fixed: LSA fails to create RAID 10 with large number of drives.(SCGCQ01833469)
- LSA does not ask for user confirmation for possible Data corruption while changing Pd state from "offline->online".(SCGCQ01838943)
- LSA : Stale entries are coming in DG tab when the VD (failed) is in foreign config.(SCGCQ01818953)
- fixed: Info "1920 more drives can be added" need to change in LSA.(SCGCQ01827401)
- The display wrong location in page(SCGCQ01836732)
- LSA : GUI tab alignment is not coming proper after user initiates manual learn cycle for Supercap.(SCGCQ01818960)
- LSA:fw error "BAIL_OUT at line 2909",FDE drive filtering for creating Encrypted RAID0 volumes lists non-FDE drives.(SCGCQ01850008)
- LSA login to ESXi 6.x servers fails in SLES 15 OS.(SCGCQ01876091)
- Fixed: unblock LSA login on ESXi 6.7 U1.(SCGCQ01866289)
- Linux system is getting IPV6 by default & it is not taking private IPV4 range(10 series) in LSA main page.(SCGCQ01817305)
- Security Key Confirm Text box should not accept the copy of anything.(SCGCQ01788477 port of SCGCQ01629574)
- SCGCQ01856350: LSA_18D installed in SLES15 OS, the icon in LSA shows as Redhat icon.(SCGCQ01856730 port of SCGCQ01856350)
- The LSA is failing to take into account current USED PDs from another configured VD during next VD creation.(SCGCQ01837378 port of SCGCQ01833791)
- SCGCQ01538253: LSA-4.055.0.0: IT-Cutlass- LSA Event logs is missing Enclosure ID's and slot-36 is shown to be present in.(SCGCQ01828400 port of SCGCQ01538253)
- Activity to check-in Auto-BST files to 7.8 streams.(SCGCQ01817915 port of SCGCQ01793057)
- SCGCQ01829895: LSA uninstaltion is not working in SLES15 OS.(SCGCQ01869566 port of SCGCQ01829895)

EnhancementRequests (20)
- RTTrace API Changes.(SCGCQ01745568)
- API Changes for Driver/FW DCMD HandShake.(SCGCQ01841266)
- RTTrace Enable/Disable API changes.(SCGCQ01830211)
- Criteo: API changes reversal.(SCGCQ01760512)
- Mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled.(SCGCQ01757538)
- Unmap: Define new API for enhanced UNMAP support.(SCGCQ01758062)
- Adding API bit to indicate whether forced personality change is supported or not.(SCGCQ01762153)
- Unmap: Define new events for enhanced UNMAP support [MR7.8].(SCGCQ01803319)
- Deprecate the snap dump fields that are no longer needed for MR_SNAP_DUMP_PROPERTIES structure.(SCGCQ01816724)
-.(SCGCQ01818580)
- Add the API to clear all the snap-dumps from firmware.(SCGCQ01824135)
- API change to provide learn complete timestamp.(SCGCQ01845269)
- Added Support for Triggering SnapDump.(SCGCQ01848759)
- Add secure boot support.(SCGCQ01792416)
- Including The Time Stamp for every Snap Dump created in the firmware.(SCGCQ01797424)
- Aero FW - Reporting SSD wear gauge values for OEM specific customers.(SCGCQ01798686)
- [MR 7.8] API change to return apt failure status for a personality change request.(SCGCQ01853480)
- Added new events for unmap policy changes.(SCGCQ01871912)
- API Changes - After Vision PSOC FW update, applications should ask the user for power cycle instead of reboot.(SCGCQ01765150)
- Change tools to report drives attached to HBAs as JBOD instead of UGOOD.(SCGCQ01802344)


004.062.000.000  - Moderate Impact
--------------
fixed:
Nginx versions since 0.5.6 up to and including 1.13.2 are vulnerable to integer overflow vulnerability in nginx range filter module resulting into leak of potentially sensitive information triggered by specially crafted request.https://nvd.nist.gov/nvd.cfm?cvename=CVE-2017-7529.

Defects (109)
- LSA server report for iMR Inv controller displays dedicatedHotSparePerDriveGroup is 0 under "maxLimit".(SCGCQ01375788)
- SCGCQ01393056: Enclosure ID is coming up as null in LSA.(SCGCQ01393056)
- WG: Error message not fitting inside the message box in "Enable Drive Security" page..(SCGCQ01442477)
- WG: Issues pertaining to 'Make JBOD Secure' Pop up.(SCGCQ01446801)
- PerfImp: Don't handle SLIM_EVT_EXCEEDS_MAX if there is no event requires complete refresh.(SCGCQ01447165)
- WG: UI Pattern in "Virtual Drive Settings" is not uniform while creating and modifying VD properties..(SCGCQ01447697)
- WG: "Change" button shown as disabled when user tries to change Behavior mode..(SCGCQ01450713)
- DG count is shown incorrectly in server summary page : VMware 6.5.(SCGCQ01451571)
- WG: success message box for "change personality" does not have proper border.(SCGCQ01453980)
- WG: Event Log table headers needs space - Cosmetic.(SCGCQ01460053)
- WG: Notification after saving the changes in "Manage Power Save Settings" needs cosmetic change..(SCGCQ01460078)
- Requested personality field is not updated for Ventura.(SCGCQ01465642)
- API performance Issues pertaining to LSA Build 004.005.000.000( VMware esxi 6.5 ): Raid Mode with JBOD drives.(SCGCQ01467754)
- WG: Tooltip for help link in "Remote Server Discovery" page is not displayed..(SCGCQ01471842)
- WG: "Available UG drives" form is shown blank when "Type" is selected from ALL to any other drives..(SCGCQ01472186)
- WG: LSA showing inappropriate message after securing a DG using FDE security..(SCGCQ01472201)
- Buttons are inconsistent in Email Settings page of LSA.(SCGCQ01472752)
- Fixed: LSA app UI cannot be opened when connect M.2 NVME SSD(via HSBP) to LSI 9460-16i/9440-8i.().(SCGCQ01474461)
- MR 7.3.1_LSA fails to find server when there is no network.(SCGCQ01482320)
- During Advanced Vd Creation PD selection order is not maintained by the client.(SCGCQ01498969)
- Display the ROC temperature in Fahrenheit as well along with Celsius.(SCGCQ01504619)
- WG: Hand mouse pointer is used in " Background Process progress " window , where it shows the name of background operations..(SCGCQ01505999)
- [lenovo 18A] [Bugzila 117507] -Reopen -The LSA doesn’t work in Suse12.3, which has many NICs.(SCGCQ01506045)
- WG: Caps letter is expected in Settings for Alert settings successful and restore default value successful message..(SCGCQ01509253)
- WG: Sorting of drives by model number does not work for JBOD drives.(SCGCQ01511247)
- Do not allow the user to manage Personality Panel if set personalty is not supported.(SCGCQ01514527)
- SCGCQ01515443: WG: Typo in Event ID: 114 of PD state Change event related to sheild state.(SCGCQ01515443)
- 502 bad gate way observed on enclosure cable push/pull.(SCGCQ01524150)
- WG : LSA allows to add VD on offline DriveGroup and operation fails anyways.(SCGCQ01526342)
- MR 7.5_LSA: LSA gives wrong message after Online FW Update on Ventura IMR controller.(SCGCQ01532725)
- LSA shows wrong diskgroup info when you have foreign PD.(SCGCQ01590450)
- Lenovo_18B: Not able to set max no of PD using set patrol read properties in LSA/Storcli.(SCGCQ01681070)
- Fixed: LSA handle count increase was observed.(SCGCQ01713154)
- Lenovo CIT 18B: LSA Linux doesn't have latest storelib.(SCGCQ01713580)
- SCGCQ01385340: Health is not coming proper after foreign config import..(SCGCQ01385340)
- Disabled Phy is not populated from the server when we fire /phys uri.(SCGCQ01389892)
- MR7.3_Focused Regression_Strange character when exceeding max number of Uncof good drives on iMR.(SCGCQ01419325)
- WG: Not all space in "Foreign Configuration" tab is clickable..(SCGCQ01467702)
- WG: Font style across the "Advanced Configuration" form should be made same..(SCGCQ01472063)
- Removing dead code from LSA7.5 stream..(SCGCQ01472185)
- WG: "Ok" button needs to be in caps in "Mixed listed drives" confirmation page and one more cosmetic change..(SCGCQ01472190)
- WG: There is no alignment for the error message while user changes the personality mode when PR is in progress..(SCGCQ01474932)
- WG: LSA is not allowing User to change No of PD's allowed for Patrol Read in Set PR properties through KeyBoard..(SCGCQ01479402)
- WG: Trying to clear configuration does not show any warning in server summary page regarding cached data, in CC page it shows.(SCGCQ01486698)
- WG: Select all check box is still selected even if one of the drive group is unselected while assigning HSP to existing DG.(SCGCQ01488141)
- WG: while creating FDE VD, type by default is selected as "All" in PD selection pane, unable to select all FDE drives.(SCGCQ01488169)
- Requested personality field is not updated for Ventura.(SCGCQ01494598)
- temperature change in controller is not refeclected in LSA..(SCGCQ01500344)
- Set patrol read window shows a time in past..(SCGCQ01503810)
-.(SCGCQ01508528)
- SCGCQ01509259: WG: Separator is missing in few places of event logs..(SCGCQ01509259)
- WG: LSA provides option of performing an RLM operation on Degraded VD, which fails.(SCGCQ01509708)
- LSA Server: Set Patrol read is not shown when the volume is created with SSD.(SCGCQ01511260)
- SCGCQ01513209: WG: Simple configuration tab show invalid options before the raid level drop down list the supported raid levels.(SCGCQ01513209)
- WG : Advanced configuration tab gets disabled after secure erasing the FDE foreign drives.(SCGCQ01514728)
- SCGCQ01521013: MR 7.5_LSA: LSA gives wrong message after Online FW Update on Ventura IMR controller.(SCGCQ01521013)
- MR 7.5_LSA: LSA keeps on refreshing during the background operations- Full init, RLM, CC etc.(SCGCQ01522807)
- WG: Behavior mode is missing in "personality management" window..(SCGCQ01523045)
- SCGCQ01525738: MR 7.5_LSA: Wrong nginx version is reported in linux ( SLES and RHEL ) Operating Systems..(SCGCQ01525738)
- Instance validation issues with LSA build 4.55 with IR3 controller.(SCGCQ01528425)
-.(SCGCQ01628332)
- WG: Current Profile is not selected by default in the table that lists the available profiles for the controller..(SCGCQ01442481)
- WG: "%" is accepted along with the input for Expand VD value - But not accepted for all..(SCGCQ01445384)
- WG: Partition line is required in Controller Properties Page..(SCGCQ01445396)
- WG: Status icon of physical drive is not changed after changing the state of the PD from rebuild to offline..(SCGCQ01461144)
- WG:LSA doesn't allow to secure more than one DG using FDE..(SCGCQ01472853)
- SCGCQ01474327: Handle dynamic length serial number as part of serial number VPD page 0x80.(SCGCQ01474327)
- WG: GUI : Cosmetic issues in clear configuration notificationp.(SCGCQ01486692)
- WG: LSA does not notify the user with notification on starting the VD initialization.(SCGCQ01487270)
- WG: able to add VD for scheduling consistency check even after all the VD's have been deselected.(SCGCQ01489509)
- WG:Add physical Drive button is clickable before VD list is loaded while scheduling CC or PR, no notification to user to wait.(SCGCQ01489885)
- LSA provides option of performing an RLM operation on Degraded VD, which fails.(SCGCQ01489942)
- LSA: Virtual drive, spare and drivegroup is not supported for IT but seen in URI response for Physical drives..(SCGCQ01500099)
- WG: Selection of different drive type is activated after few clicks.(SCGCQ01503786)
- RWC3 launch tab is showing the LSI Storage Authority.(SCGCQ01503896)
- WG : Pop up for securing FDE drive has inconsistency in text.(SCGCQ01507972)
- In settings window "Restore Default Alert settings" button is not saving the default values.(SCGCQ01508002)
- WG: Confirm Check box is not aligned with the "Enable Security" button.(SCGCQ01511250)
- LSA WG: arrow mark in the link " <- Go back to Drive Group, Drives and Other Hardware list" is not clickable.(SCGCQ01511390)
- WG:Server Logs does not contain status of energy pack it mentions "Requested element not found in the stack.":error "69634".(SCGCQ01512318)
- WG: Spell Check issues with "message_en.js" used for displaying the GUI notification.(SCGCQ01512377)
- Sorting of Event logs wrt View Events and Download Logs.(SCGCQ01512750)
- WG: LSA add physical Disks pane shows empty drive list even if there are 182 drives for adding for RLM operation.(SCGCQ01513656)
- Controller operations schema instant validation is failed.(SCGCQ01514528)
- WG: LSA shows the message "The virtual disk has not been initialized" even when 32 VD's have been selecte.(SCGCQ01521694)
- Lenovo-18B: IPV6 IP is overlapping OS name and arch in LSA GUI if we see server discovery page in list view in SLES12 SP3.(SCGCQ01595641)
- WG: "Virtual Drive expanded successfully" message is still shown even after the page refresh post VD expansion..(SCGCQ01445693)
- WG: Cosmetic changes required in tooltip messages of Configure options in Controller Actions..(SCGCQ01447797)
- WG: Space is required between RAID and it's type in Available UG drives form and one more cosmetic change..(SCGCQ01472194)
- WG:Instance Validation Fails for foreignConfiguration-schema.json in iMR_Ventura.(SCGCQ01473733)
- LSA: partial VD hide operation is failing..(SCGCQ01484118)
- SCGCQ01506090: WG: In Settings under email tab , email id list will always have an empty row once we add and remove email_id.(SCGCQ01506090)
- WG:Launching LSA using ip:2463 in browser, User can see the HOME page flash before redirecting to Remote discovery.(SCGCQ01439795)
- WG: LSA displays empty box instead of "Action Successful" for "Prepare for removal" and "Undo prepare for removal".(SCGCQ01447823)
- WG: "Adding the virtual drive will add the corresponding virtual drives for PR" is not shown when "select all" box is used..(SCGCQ01461133)
- WG: Size of "Back" & "Save" buttons are not same once the user saves the changes after scheduling CC.(SCGCQ01472749)
- WG: Hand symbol is not seen for close button while Adding drive during reconstruction of a DG.(SCGCQ01473748)
- Disabling the add PD button.(SCGCQ01488036)
- WG: no notification shown on assigning dedicated hotspare to existing DG.(SCGCQ01488155)
- System x PE: LSA Does Not Support the Hyphen Character "-" In Domain Names.(SCGCQ01507989)
- WG: Infinite request observed on stopping LSA and Nginx services..(SCGCQ01509681)
- WG: Error message on a failed operation of RLM in displayed outside the allocated space.(SCGCQ01515263)
- WG: arrow mark in the link " <- Go back to Drive Group, Drives and Other Hardware list" is not clickable.(SCGCQ01442471)
- WG: Expand windows is showing the capacity in decimal value with too many integers after decimal point..(SCGCQ01445686)
- Address Code review defects for ER SCGCQ01416373.(SCGCQ01455923)
- WG: Ambiguous "Success" message needs to be changed for disabling drive security.(SCGCQ01461177)
- Cannot import foreign configuration from LSA.(SCGCQ01524354)
- WG: Email setting tab heading of LSA displays the entire sentence with "_" in between instead of space.(SCGCQ01563343)
- SCGCQ01599526: Lenovo PE: Memory Leak in LSABug.(SCGCQ01599526)

EnhancementRequests (20)
- New configuration params added for EPD-PT devices.(SCGCQ01599607)
- API changes needed to support eHBA product series.(SCGCQ01727346)
- Create sanitize events.(SCGCQ01713708)
- Modify event string APIs for MISSING and OFFLINE LDs.(SCGCQ01628177)
-.(SCGCQ01404233)
- SCSI UNMAP switching support from LSA GUI.(SCGCQ01461207)
- NVDATA parameter to OPAL SED.(SCGCQ01614689)
- Add new MFI Status to block requested operation due to existing controller configuration.(SCGCQ01670135)
- Change the mr.h API comment showing the new return status for the - MR_DCMD_PD_GET_INFO.(SCGCQ01670234)
- API change for Switch attached NVMe HW RAID support for Supermicro backplanes.(SCGCQ01697667)
- LSA: Make heavy operation by wrapping scheduler call.(SCGCQ01416373)
 - LSA Server: PR:SCGCQ01231749 -- Show controller temperature in LSA for RAID and SAS IT controllers.(SCGCQ01443721)
- LSA Server: PR:SCGCQ01231749 -- Show controller temperature in LSA for RAID and SAS IT controllers.(SCGCQ01443731)
- Support drive Select ALL functionality in LSA GUI PD Operations and Mixing of drives during vd creation.(SCGCQ01454110)
- SCGCQ01454353: Retrieve and process the ESXi events in a single shot.(SCGCQ01454353)
-.(SCGCQ01454367)
- LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n.(SCGCQ01563340)
- We will be removing the confirmation popup from all the actions as we got here from multiple forms like this pop up is annoying.(SCGCQ01447015)
- Support drive Select ALL functionality in LSA GUI VD/DG Operations.(SCGCQ01453114)
-.(SCGCQ01472631)

CSETActivities (87)
- In Standalone LSA periodic automatic refresh is not happening. To display the latest status do manual refresh.(SCGCQ01411631 port of SCGCQ01397546)
- MR7.3_Focused Regression_Strange character when exceeding max number of Uncof good drives on iMR.(SCGCQ01420224 port of SCGCQ01419325)
- LSA service is not working in Linux.(SCGCQ01443712 port of SCGCQ01442733)
- WG: Event Log table headers needs space - Cosmetic..(SCGCQ01464556 port of SCGCQ01460053)
- SCGCQ01424621: PD serial number getting truncated on few PDs.(SCGCQ01466763 port of SCGCQ01424621)
- MR 7.3.1_LSA fails to find server when there is no network.(SCGCQ01500133 port of SCGCQ01482320)
- Updated PD firmware version is not reflecting even after LSA refresh..(SCGCQ01501204 port of SCGCQ01382013)
- Cisco_Plumus_LR :Proper spacing should be there in between Event and History in view event logs "EventHistory not generated"..(SCGCQ01502201 port of SCGCQ01385344)
- While retrieving the enclosure details instead of referring to the ENCL structure, in this case LSA is referring the PD structure.(SCGCQ01503907 port of SCGCQ01315392)
because of which the issue.(SCGCQ01503926 port of SCGCQ01288032)
- fixed: clear drive should not be candidate drive for create configuration.(SCGCQ01503958 port of SCGCQ01196088)
- Fixed: Span order is in reverse compare to other apps.(SCGCQ01504234 port of SCGCQ01330269)
- LSA shows max pd for Raid 1 without checking support of Raid 1E.(SCGCQ01514472 port of SCGCQ01513338)
- Cisco - CSCvg96681 - LSA-3.163 should display proper message after logout.(SCGCQ01531154 port of SCGCQ01521114)
- Making rebuild drive offline lsa gets 404..(SCGCQ01564627 port of SCGCQ01542412)
- LSA Crashes after clicking on foreign configuration.(SCGCQ01564739 port of SCGCQ01545262)
- Modify the LSA Health Algorithm to consider the Blocked VD.(SCGCQ01565025 port of SCGCQ01504080)
- LSA 7.6:LSA does not provide the Stop rebuild option in the action pane once the rebuild operation is in progress in Rhel 7.4.(SCGCQ01565116 port of SCGCQ01555955)
- Cisco - CSCvh55470 - LSA should display proper message for ESXi after LBP/Talladega firmware upgrade/downgrade.(SCGCQ01566052 port of SCGCQ01562368)
- SWR: Device ID is not displayed in LSA..(SCGCQ01566241 port of SCGCQ01564621 )
- LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n.(SCGCQ01599402 port of SCGCQ01563340)
- MR7.6_LSA: No Foriegn configuration details is shown in LSA.(SCGCQ01605344 port of SCGCQ01581943)
- fixed: logout causing unexpected behavior during end cim connection for vmware systems.(SCGCQ01609343 port of SCGCQ01578248)
- SCGCQ01355833: WG:After deleting the cookies from browser, DA does not go back to login page..(SCGCQ01614982 port of SCGCQ01355833)
- LSA displays "Erase operation is successful" when replace operation is in progress on the drive in same drive group..(SCGCQ01617930 port of SCGCQ01401460)
- SCGCQ01506090: WG: In Settings under email tab , email id list will always have an empty row once we add and remove email_id.(SCGCQ01620406 port of SCGCQ01506090)
- WG:Instance Validation Fails for foreignConfiguration-schema.json in iMR_Ventura.(SCGCQ01634072 port of SCGCQ01473733)
- Raid 1 Volume creation using 4 drives is displayed as Raid 1E.(SCGCQ01686231 port of SCGCQ01686106)
- Cannot use Special Characters in Domain Name for LSA Login.(SCGCQ01747012 port of SCGCQ01745768)
- LSA: patrol reads gets initiated on all the vd's that are created though only one vd is selected..(SCGCQ01448948 port of SCGCQ01442107)
- DG count is shown incorrectly in server summary page : VMware 6.5.(SCGCQ01460039 port of SCGCQ01451571)
- WG: LSA takes some time (2-3 min) in order to display the remote server page after multiple service restarts..(SCGCQ01465657 port of SCGCQ00903348)
- DG count is shown incorrectly in server summary page : VMware 6.5.(SCGCQ01466743 port of SCGCQ01451571)
- LSA server giving null for enclosure serial number.(SCGCQ01466744 port of )
- Address Code review defects for ER SCGCQ01416373.( port of SCGCQ01445713)
- MR 7.3.1_LSA fails to find server when there is no network.(SCGCQ01484107 port of SCGCQ01482320)
- Added fwflash status as part of controller health status.(SCGCQ01503830 port of SCGCQ01375153)
- While retrieving the enclosure details instead of referring to the ENCL structure, in this case LSA is referring the PD structure because of which the issue.(SCGCQ01503955 port of SCGCQ01288032)
- [lenovo 18A] [Bugzila 117507] -Reopen -The LSA doesn’t work in Suse12.3, which has many NICs.(SCGCQ01514258 port of SCGCQ01506045)
- System x PE: LSA Does Not Support the Hyphen Character "-" In Domain Names.(SCGCQ01514469 port of SCGCQ01507989)
- Allows raid 1e input even if RAID 1E is not supported by fw.(SCGCQ01514756 port of SCGCQ01513331)
- Activity to check-in build files.(SCGCQ01514879 port of SCGCQ01514834)
-.(SCGCQ01520055 port of SCGCQ01508528)
- Cisco - CSCvh55470 - LSA should display proper message for ESXi after LBP/Talladega firmware upgrade/downgrade.(SCGCQ01564633 port of SCGCQ01562368)
- Activity to check-in AutoBST files to new MR 7.5 streams.(SCGCQ01564703 port of SCGCQ01564674)
- WG: LSA service crashes on trying to login with URI having incorrect mac address of the server.(SCGCQ01615042 port of SCGCQ01601386)
- MR7.6: LSA crashed with a mouse click on VD.(SCGCQ01685343 port of SCGCQ01641760)
-.(SCGCQ01685548 port of SCGCQ01685009)
- LSA detects secured JBODs as unconfigure good when drives moved to another system -StorCLI detects them as foreign config.(SCGCQ01687173 port of SCGCQ01686105)
- LSA is not showing the proper message when user unlocks the foreign jbod drivesin JBOD mode.(SCGCQ01716641 port of SCGCQ01716622)
- SDS/HBA progress issues.(SCGCQ01460070 port of SCGCQ01052983)
- Physical drives Get call taking considerably long time :it takes 5+ minutes to respond for 24 PD's in an enclosure.(SCGCQ01460084 port of SCGCQ01435908)
- SCSI UNMAP switching support from LSA GUI.(SCGCQ01461211 port of SCGCQ01461207)
- C480-M5: LSA downloaded event log needs better decoding.(SCGCQ01501225 port of SCGCQ01321211)
- Cisco - CSCve68492 - Storage Logs display a blank event when a secure PD is unlocked.(SCGCQ01503902 port of SCGCQ01359128)
- SCGCQ01509259: WG: Separator is missing in few places of event logs..(SCGCQ01514773 port of SCGCQ01509259)
- WG: Infinite request observed on stopping LSA and Nginx services..(SCGCQ01526363 port of SCGCQ01509681)
- SCGCQ01547992: WG: standalone LSA Installation on Rhel 6.9 32 bit notifies user with invalid message.(SCGCQ01564682 port of SCGCQ01547992)
- LSA: Warning Message needs to be changed when there is Controller firmware update failure.(SCGCQ01604992 port of SCGCQ01564526)
- SCGCQ01599526: Lenovo PE: Memory Leak in LSA.(SCGCQ01633836 port of SCGCQ01599526)
- Secure Jbod unlock is not showing the proper error message in LSA.(SCGCQ01680728 port of SCGCQ01677101)
- LSA detects secured JBODs as unconfigure good when drives moved to another system -StorCLI detects them as foreign config.(SCGCQ01687172 port of SCGCQ01686080)
- Cisco - CSCvi84075 - LSA, CTRL-R and HII doesn't display the foreign config when MAX VDs are present.(SCGCQ01718980 port of SCGCQ01698211)
- LSA is not Displaying Both the Foreign Configurations (Encrypted and Unencrypted) for Import/Clear/re scan..(SCGCQ01460090 port of SCGCQ01460076)
- WG: LSA is not Displaying Both the Foreign Configurations (Encrypted and Unencrypted) for Import/Clear/re scan..(SCGCQ01460400 port of SCGCQ01448976)
- Fixed: LSA app UI cannot be opened when connect M.2 NVME SSD(via HSBP) to LSI 9460-16i/9440-8i.(SCGCQ01481410 port of SCGCQ01474461)
- LSA build script automation for VBAS environment.(SCGCQ01497385 port of SCGCQ01385344)
- Activity to check-in version files in common.(SCGCQ01520315 port of SCGCQ01512599)
- Cisco - CSCvg96681 - LSA-3.163 should display proper message after logout.(SCGCQ01531153 port of SCGCQ01521114)
- MR/IR: Controller Device ID value mismatch in LSA.(SCGCQ01566055 port of SCGCQ01564622)
- LSA Client 7.6: SPAN drives order is not maintained.(SCGCQ01614833 port of SCGCQ01539355)
- Hercules- LSA : VD access policy not showing as blocked for SVD on CC VD offline..(SCGCQ01443689 port of SCGCQ01442554)
- LSA: During the installation "Range of Events" selection is not reflecting in the LSA.conf file.(SCGCQ01472166 port of SCGCQ01472048)
- SCGCQ01479375: LSA WebGui: "logs.txt" is generated in logs directory after fresh installation in Linux..(SCGCQ01480902 port of SCGCQ01479375)
- LSA WG Fury IT: Fury Device ID is showing as 00 instead of 0x0097 in controller properties logs..(SCGCQ01564943 port of SCGCQ01534444)
- Modify the LSA Health Algorithm to consider the Blocked VD.(SCGCQ01565119 port of SCGCQ01504080)
- Cisco - CSCvi55512 - CC in concurrent mode runs only on 2 VDs at a time.(SCGCQ01676612 port of SCGCQ01670094)
- LSA Wont display foreign data when enclosure information in not populated properly.(SCGCQ01686054 port of SCGCQ01685449)
- LSA : Silent installation is accepting the invalid options also for LSA/HPE/RWC3.(SCGCQ01472265 port of SCGCQ01389392)
-.(SCGCQ01564591 port of SCGCQ01515389)
- API performance Issues pertaining to LSA Build 004.002.000.000( VMware esxi 6.5 ).(SCGCQ01460393 port of SCGCQ01436886)
- LSA Windows BST Automation scripts.(SCGCQ01472059 port of SCGCQ01460401)
- LSA 7.6:LSA does not provide the Stop rebuild option in the action pane once the rebuild operation is in progress in Rhel 7.4.(SCGCQ01557665 port of SCGCQ01555955)
- LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n.(SCGCQ01564577 port of SCGCQ01563340)
- LSA WG Inturder IT: 0 Byte drive is missing after sorting the drives based on capacity of drive..(SCGCQ01564629 port of SCGCQ01550970)
- LSA WG Fury IT: Controller type is showing as IR for IT card.(SCGCQ01564631 port of SCGCQ01540821)
- I/Os are not recover after drives pull for DHSP to rebuild..(SCGCQ01564737 port of SCGCQ01514206)

4.011.000.000 - Moderate Impact
-------------
Defects (234)
- SDS/HBA progress issues.(SCGCQ01052983)
- Fixed: Added relevant null pointer checks.(SCGCQ01319978)
- Selected firmware version is coming empty for IR/IT/IMR controller.(SCGCQ01321474)
- Start PatrolRead success dialog box needs change in alignment.(SCGCQ01324866)
- WG: Trying to import Encrypted VD with Drive security disabled results in error code: 0x11005, it provides No Details to user.(SCGCQ01325783)
- Link speed is not displaying any details in LSA.(SCGCQ01326129)
- Defect to check in code review defects.(SCGCQ01329391)
- Client js file changes for 7.3.(SCGCQ01331593)
- On Successful Firmware flash client displays improper Icon Message.(SCGCQ01332708)
- Control panel of LSA Help & support link still has reference to LSI. should be changed to broacom.(SCGCQ01337321)
- LSA asks for user permission to navigate away on clicking home button after creating simple configuration.(SCGCQ01338009)
- WG: GUI Issues pertaining to FW flash ER implementation SCGCQ01273627: Request to improve message displayed during FW Update.(SCGCQ01342542)
- IR Card global hot spare assignment is not refreshing the page.(SCGCQ01345357)
- Cisco_HSW_Validation_LSA: LSA accepting decimal values for "Set Adjustable Task Rate" which is saved as round value.(SCGCQ01345553)
- LSA 7.3 Client Coverity fix.(SCGCQ01347309)
- Cisco_LSA: 'vdname' parameter is missing in the event description that is generated whenever a volume property is modified.(SCGCQ01350435)
- WG:descripancies in update firmware page after selecting load bios option.(SCGCQ01350865)
- SCGCQ01350908: WG:Temperature of Unconfigured Drive is displayed as 0C under More properties.(SCGCQ01350908)
- WG:LSA displays Redhat icon in remote discovery page ,though SUSE is installed in system.(SCGCQ01351455)
- LSA taking the max VD size value when the user presses ENTER after specifying the VD size.(SCGCQ01356216)
- SCGCQ01356217: WG: LSA Service crashes on trying the PD details of the simple config created.(SCGCQ01356217)
- LSA_MR_7.3_Alpha: Save option can be grayed out or disabled after user saves the changes for schedule CC.(SCGCQ01357152)
- LSA_MR_7.3_Alpha: LSA doesn't display consistent Foreign Configuration information to the user.(SCGCQ01358048)
- WG: Incorrect notification shown after selecting 32 virtual drives.(SCGCQ01358095)
- SCGCQ01358097: LSA_MR_7.3_Alpha: Space optimization between the size value & size unit is needed in foreign configuration page.(SCGCQ01358097)
- LSA_MR_7.3_Alpha: User cannot select "Advanced Configuration" by clicking on the description below it in Server landing page.(SCGCQ01358122)
- LSA_MR_7.3_Alpha: Space Alignment for better presentation needed in Server Profile Page.(SCGCQ01358148)
- LSA_MR_7.3_Alpha: Percentage value for the Background Operations is not seen if browser is zoomed.(SCGCQ01358261)
- LSA crash when service starts with empty LSA.conf file.(SCGCQ01358264)
- SCGCQ01358892: Buttons "Try Updating Again" is not highlighted when user attempts to flash the firmware after any failure.(SCGCQ01358892)
- SCGCQ01358947: WG: Invalid text Content displayed on selecting multiple Virtual drives/Physical Drives.(SCGCQ01358947)
- WG: "Select Personality" dropdown lists the current personality first by default.(SCGCQ01359030)
- WG: Clickable "hand icon' is not displayed when we move cursor over Bus dev text of controller in Server summary page.(SCGCQ01359034)
- SCGCQ01372670: When User tries to click on Update FW Button, LSA asks for Navigation Confirmation without displaying Update FW page for IT.(SCGCQ01372670)
- "Add CacheCade-SSD VD" tab getting greyed out after deleting created vd,even if physical drive is selected under "Add SSD pd".(SCGCQ01372722)
- WG: VD creation fails when multiple VD's are created with 1MB size.(SCGCQ01373500)
- "Finish" button in Modify drive group work even if its grayed out.(SCGCQ01374945)
- WG: Issues pertaining to Controller Diagnostic logs.(SCGCQ01375839)
- WG: GUI Issues pertaining to Instant secure erase of an FDE Drive.(SCGCQ01375858)
- There is a mismatch about Backplane (Enclosure) "Product ID" and "Enclosure Model" in LSA.(SCGCQ01376005)
- Spare URI does not respond on iMR Invader.(SCGCQ01376605)
- WG: After physically removing the PD from the R10 DG, the DG Span tab does not load.(SCGCQ01376781)
- "Since Log Clear" does not create the last event "Log Clear" in Var/log/messages.(SCGCQ01376849)
- WG: LSA does not list the Drive Group Tab , on creation of 240 VD (15 DG, 16 VD in each of DG) and reinstalling the LSA.(SCGCQ01378585)
- WG: Windows Application Event viewer lists 31 events instead of 30, after installing LSA with the option "Since Last reboot".(SCGCQ01378669)
- WG: LSA does not automatically refresh on hiding an Degraded DG.(SCGCQ01378693)
- Client: Error message that user encounters for Max User login, message needs to be displayed with proper message.(SCGCQ01378778)
- Client: WG: Instance Validation failed for Spares GET URI : MR Ventura.(SCGCQ01378782)
- WG: unable to start VD initialization on 32 VD's when there are 240 VD created & Foreign configuration present in system.(SCGCQ01378808)
-.(SCGCQ01378812)
- WG: Error message is not proper if the username is not provided while verifying server in Manager server page.(SCGCQ01379795)
- WG:In premium features Safe ID & Serial Number needs to be highlited for better understanding.(SCGCQ01379818)
- WG: Close button can be given with a "hand" symbol in Compare and select form like all close button in other form has.(SCGCQ01380587)
- WG: Available Unconfigured drives is not formatted properly for display.(SCGCQ01380591)
- WG: Domain Authentication is shown as Default in "MAnage Server Page".(SCGCQ01380642)
- Size increment button is not working while modifying a VD that is created in MB size.(SCGCQ01380830)
- WG: "Advanced and Simple Configuration" is enabled when UG drives are "prepared for removal" and no other drives are left.(SCGCQ01380977)
- SCGCQ01383828: LSA service crashes while trying to access the IR3 controller.(SCGCQ01383828)
- WG:VD properties were not well partitioned for CacheCade - SSD config , compare to normal VD creation in HDD.(SCGCQ01384561)
- WG: Few enhancements needed in VD Expand form.(SCGCQ01389165)
- SCGCQ01389195: WG: Naming convention for VD can be made consistent for the VD's created through Advanced and Simple configuration.(SCGCQ01389195)
- Enter key is functioning as a backspace in "Set Adjustable Task Rate" - Can be disabled.(SCGCQ01389203)
- LSA mail server settings does not allow to enter name of smtp server.(SCGCQ01389204)
- WG: No. of VD's available to create is not shown properly for spanned vd's when span depth is modified.(SCGCQ01389421)
- Storcli: Battery Capacitance is displayed incorrectly across different applications.(SCGCQ01392000)
- WG: More Actions for drive is not working after staring and stopping Clear operation under Drives tab.(SCGCQ01392056)
- WG: User has to click twice on the table header to change the sorting order for any table in LSA.(SCGCQ01393336)
- Copyright link is taking to top of the page rather taking to Broadcom website.(SCGCQ01393706)
- WG: PD state info is not updated properly in the Drives tab after PD's are converted from online to offline.(SCGCQ01393771)
- WG: "Clear" and "Rescan" buttons could be highlighted for the better look in Foreign Configuration Tab.(SCGCQ01394954)
- "Add Virtual Drives" is grayed out for specific VD sizes after user presses "tab-alt" keys.(SCGCQ01398966)
- WG: Verify and Sign In Buttons are overlapping in list view in Manage Server Page.(SCGCQ01399610)
- LSA is not showing "Activate..." button for Premium Features when it is navigated after "Update Firmware" page.(SCGCQ01399670)
- WG:LSA sending email alert notifications to user which doesn't exist.(SCGCQ01418580)
- Drives under both Physical drives and Span drives tab are allowed to select simultaneously.(SCGCQ01428129)
- Login to VMware is taking at time more than 30 seconds.(SCGCQ01429431)
- Physical drives Get call taking considerably long time :it takes 5+ minutes to respond for 24 PD's in an enclosure.(SCGCQ01435908)
- WG:while editing a created VD, user cannot increase the VD size in MB .Only can decrease the size.(SCGCQ01438268)
- WG:LSA is not sorting properly the drives with different capacity of units i.e TB and GB.(SCGCQ01439751)
- WG: View server profile does not contain info on the Device id, which is sorted according to device id itself.(SCGCQ01440773)
- WG: operation of Combining JBOD drives with & without files system to move to Unconfigurued good is partially successful.(SCGCQ01440778)
- WG: Space required between two strings in the description of "Enable Drive Security".(SCGCQ01442479)
- WG: LSA Displays "Error Code:1:An user is already Logged in with Different Credentials" even user is using same credentials.(SCGCQ01442773)
- WG: LSA is changing to latest login user account though it is already logged with different User Account in different Tab.(SCGCQ01442774)
- WG: No. of UG drives are improperly updated in the Drives header tab when replace operation is triggered on a physical drive.(SCGCQ01444724)
- WG: No. Of Power Supplies info displayed is overlapping on the enclosure details. Need proper display alignment.(SCGCQ01444794)
- LSA showing 'binaryPath:./LSA' during service start in Linux.(SCGCQ01445709)
- LSA server giving null for enclosure serial number.(SCGCQ01445713)
- WG: LSA events displays invalid details for unexpected sense events.(SCGCQ01445719)
- WG: Description for event Code"579" is '0" in LSA event logs.(SCGCQ01446803)
- WG:"Disable Data Protection" is not updating in LSA until user do a manual refresh.(SCGCQ01447843)
- SCGCQ01448707: WG: LSA Event logs has enquiry info for Vendor, model and serial numbers appended with $ symbols.(SCGCQ01448707)
- WG: Inconsistency seen w.r.t making drive online while RLM is in progress.(SCGCQ01449722)
- WG: Event log page is navigating to change personality when the behavior mode is set from other tab of the same browser.(SCGCQ01450719)
- DG count is shown incorrectly in server summary page : VMware 6.5.(SCGCQ01451571)
- WG:Controller health status not updated on moving JBOD drive from offline --> online, personality : JBOD.()
- LSA Server: Handling of additional events in Cache module.(SCGCQ01451573)
- LSA: During the installation "Range of Events" selection is not reflecting in the LSA.conf file.(SCGCQ01464514)
- [lenovo 18A] [Bugzila 117507] -Reopen -The LSA doesn’t work in Suse12.3, which has many NICs.(SCGCQ01506045)
- WG: Enclosure ID is shown "Unknown" for NVMe JBOD only in event logs, Profile id=11.(SCGCQ01291162)
- WG: LSA page does not refresh on starting Full initialization on 240 VD.(SCGCQ01292183)
- Phase3 Beta PCIe: Loading SLOOB fails with error message "ExitLib failed for SAS IT Controller!! rval 0x801A".(SCGCQ01292964)
- 7.3 Client : Coverity defects check-in.(SCGCQ01308624)
- SCGCQ01309034: Coverity defect fixes check-in.(SCGCQ01309034)
- Fixed: Code maintainability issue.(SCGCQ01318344)
- coverity defect fies for : Suspicious use of non-short-circuit boolean operaton.(SCGCQ01320079)
- In Simple Config, if user select a VD and select the check box of "Assign HSP", VD size is getting changed to different size.(SCGCQ01321225)
- WG: LSA notifies user that VD will be deleted after VD erase even if the option was not selected.(SCGCQ01325795)
- WG: user notification appearing after user starts/stops the initialization on multiple VD's needs to be updated.(SCGCQ01326134)
- LSA doesn't show FW component name while FW flash operation.(SCGCQ01337028)
- WG: Multiple options of RLM are selected together for radio button used to select one of the 3 RLM operations.(SCGCQ01342615)
- LSA does not display "Link Speed" for phy 8 properly for iMR Ventura.(SCGCQ01355929)
- When the CC is scheduled as "Continuously", it is not reflected in UI after saving the changes.(SCGCQ01357007)
- Warning message has to be corrected in Foreign configuration page and one more hyperlink issue.(SCGCQ01358066)
- LSA is not taking "dot(.)" from num pad , but taking "dot(.)" form keypad while specifying the vd capacity.(SCGCQ01358908)
- Selected firmware version is coming empty for IR/IT/IMR controller.(SCGCQ01364736)
- WG: LSA displays the notification "This operation can be performed only on 32 drives at a time" 32 times.(SCGCQ01373067)
- WG: Global hotspare & Dedicated hotspare are displayed as plural entities for every hotspare listed in physical drive tab.(SCGCQ01375707)
- WG: Instance Validation failed for Spares GET URI : MR Ventura.(SCGCQ01375778)
- fixed: Min & Max of "PdRaidLevel_1E" under the "pdsForRaidLevels" is populated even though it is not supported in iMR.(SCGCQ01375817)
- WG: Other hardware tab lists wrong count of list of hardware connected when enclosure connected in multipath.(SCGCQ01376109)
- WG: View server profile contents exceed the border limits of the LSA page.(SCGCQ01378556)
- SCGCQ01378774: WG: Information of the virtual drive info and PD's involved in DG vanishes on removing & inserting the PD back from a DG.(SCGCQ01378774)
- WG: Links present in Backplane properties are so light that they look like grayed out. Needs enhancement.(SCGCQ01380680)
- WG: User is allowed to click on "Next" button even if page is not completely updated during the VD creation & RLM operations.(SCGCQ01381734)
- GUI Issues found in Advanced Configuration page.(SCGCQ01381764)
- Firmware flash message should have "new" removed from string.(SCGCQ01382062)
- LSA getting logged in , even if the password is wrong.(SCGCQ01388957)
- "%" is allowed for entering no. of seconds for locating the drives.(SCGCQ01389182)
- WG: Size limit warning is thrown if the user is giving valid size using spinner button while modifying VD.(SCGCQ01389340)
- WG: Message displayed after flashing the controller FW has to be modified for better presentation - Enhancement.(SCGCQ01389483)
- Spinner Button for increase and decrease size is not working when the size is 1.09 TB.(SCGCQ01392053)
- WG: "Username" has to be grayed out when user start typing in the login page of "Manage Server Page".(SCGCQ01393764)
- WG: UG Drives count is not updated properly after modifying a DG.(SCGCQ01393774)
- Phase 5 IT LSA - EFI-BSD version is not displayed fully when Version length is more than 12 characters.(SCGCQ01394914)
- Mismatch in enclosure properties between LSA and storecli utility.(SCGCQ01395021)
- WG: "Managing SAS Storage Link Speed" opens up on clicking help topic of "Manage PCIe Storage Interface".(SCGCQ01395075)
- when clicking on more actions for any UG drives to make DHS,the options remains as it is in LSA though the operation is done.(SCGCQ01403884)
- WG: Like "Flash Firmware" button in "Update Firmware" page, "Update" button should also have hand symbol & one more issue.(SCGCQ01405822)
- WG: while expanding exiting VD, the expand VD page is not consistent.(SCGCQ01416379)
- Fixed: WG: LSA conf does not contain the perf mode settings options configurable.(SCGCQ01422214)
- WG: Clicking on "Benefits of each MegaRAID Advanced Software Option" in premium feature is not taking to proper link.(SCGCQ01428156)
-.(SCGCQ01428383)
- LSA doesn't allow creating spanned Raid levels with 2 spans using more than 32 drives.(SCGCQ01435647)
- API performance Issues pertaining to LSA Build 004.002.000.000( VMware esxi 6.5 ).(SCGCQ01436886)
- WG : "Replace Drive "window needs improvement to look uniform.(SCGCQ01439805)
- when flashing FW with 16 mb/32 mb.ROM file , LSA throws inappropriate message.(SCGCQ01440772)
- WG: LSA displays the property Drive Security Capable as 'No' even when security is supported.(SCGCQ01442209)
- WG: the controller operations Query param : 4 has 'premium feature' and 'pinned cache' URI's GET calls in response.(SCGCQ01443879)
- WG: Confirmation Message has to be changed when more than one drives are converted from JBOD to UG state.(SCGCQ01444672)
- SCGCQ01445818: MR 7.4_Alpha_LSA does not find a server in RHEL 7.4.(SCGCQ01445818)
- WG: LSA times out after "Clear Configuration" command is issued when there is a OFFLINE DG present.(SCGCQ01447788)
- WG: Size for the VD is not updated properly when edited during VD creation.(SCGCQ01447791)
- WG: An extra "." needs to be removed in the event description for "Initialization complete on VD".(SCGCQ01449783)
- WG:Instance Validation Fails for foreignConfiguration-schema.json in iMR_Ventura.(SCGCQ01473733)
- WG: Raid 50 Vd Creation fails on unselecting drives after changing span during VD creation.(SCGCQ01309542)
- Coverity Defects - Performance Inefficiencies.(SCGCQ01313878)
- Fixed: Coverity: Class hierarchy inconsistencies.(SCGCQ01318333)
- Client: Coverty defect fixes check-in.(SCGCQ01318336)
- VD size getting increased while creating VD using simple config - Regression.(SCGCQ01341947)
- WG: Once the FW update is completed LSA shows junk character in the notification about firmware flash was successful.(SCGCQ01342536)
- SCGCQ01348082: LSA: Loopback occurs during launch. (intermittent issue).(SCGCQ01348082)
- Expand page is not closed when opened for second time.(SCGCQ01357224)
- "Add Virtual Drives" is disabled when user changes from invalid size to valid size through increment button.(SCGCQ01358299)
- WG: Error message that user encounters for Max User login, message needs to be displayed with proper message.(SCGCQ01375255)
- "Server Profile" displays blank back plane info for ctrl-1.(SCGCQ01375992)
- LSA Client : Foreign Configuration Panel issues with locked and unlocked foreign drives.(SCGCQ01378050)
- DG Actions menu is not shown properly after zooming in when VD's are hidden.(SCGCQ01380663)
- WG: Size range warning is not shown while modifying VD when unit is selected from MB to GB.(SCGCQ01380818)
- LSA Evevnt: Access policy for HIDDEN/Transport is coming as Empty.(SCGCQ01380828)
- LSA Server: User is provided with Hide and Un-Hide option though there is no HIDE performed on a VD.(SCGCQ01380845)
- WG: LSA service crashes on hiding and unhiding DG's with dedicated hotspare.(SCGCQ01380912)
- SCGCQ01383765: Resolve linux server compilation issues.(SCGCQ01383765)
- WG: Reconstruction progress is not refreshed even after the VD is cleared on which reconstruction was happening.(SCGCQ01383800)
- LSA : Silent installation is accepting the invalid options also for LSA/HPE/RWC3.(SCGCQ01389392)
- WG: Clicking on View server profile just before controller console page loads results in blank page.(SCGCQ01396731)
- WG: "DG degraded notification" is not auto-refreshed after Raid5 VD is brought from offline to online.(SCGCQ01398964)
- WG: When LSA is configured with NAT server, it is shown twice in the Remote Discovery Page.(SCGCQ01401484)
- WG: LSA is displaying loop-back address in remote discovery page while accessing LSA with IPV6 address.(SCGCQ01401546)
- WG: Hidden links present in premium features page.(SCGCQ01412883)
- WG:VD properties details need some changes to look uniform across the application.(SCGCQ01418574)
- WG: Help link for Premium Features is opening in dual tabs.(SCGCQ01428169)
- LSA: patrol reads gets initiated on all the vd's that are created though only one vd is selected.(SCGCQ01442107)
- WG:LSA is not showing the options "Pause Patrol Read|Abort Patrol Read" when PR background operation is running.(SCGCQ01442350)
- WG:when user is closing the message box for "Clear Configuration",the "X" symbol is not shown with hand symbol.(SCGCQ01442356)
- LSA service is not working in Linux.(SCGCQ01442733)
- WG: Invalid text"Each_Frehole" present in Pop up of Adding VD to existing Drive group.(SCGCQ01446454)
- WG: "Add Hot Spare" Button is enabled after selecting and deselecting the drives.(SCGCQ01448882)
- WG: LSA is not Displaying Both the Foreign Configurations (Encrypted and Unencrypted) for Import/Clear/re scan.(SCGCQ01448976)
- WG: Event with ID 552 is not updated properly. Information on Mode is empty.(SCGCQ01450725)
- LSA Client: SDS/HBA progress issue.(SCGCQ01459948)
- System x PE: LSA Does Not Support the Hyphen Character "-" In Domain Names.(SCGCQ01507989)
- LSA not giving the Un Hide All Virtual Drives operation when DG contain Hidden and normal VDs.(SCGCQ01308440)
- Coverity Defects fixes for Stream LSA7.3.(SCGCQ01311864)
- LSA7.3: Coverity defect fixes in Server code.(SCGCQ01316168)
- Coverity: Integer handling issues.(SCGCQ01318418)
- LSA Client : IR/IT Multiple Options are allowed in Update Firmware Screen.(SCGCQ01343645)
- Add hot spare page cosmetic issues.(SCGCQ01358219)
- WG:Change button is active even if button appears inactive for "Change personality", fails with an inappropriate notification.(SCGCQ01358967)
- FW last modified time is not coming properly while FW upload.(SCGCQ01359056)
- WG:while editing created vd for CacheCade - SSD Caching Configuration,the write policy tab is coming down.(SCGCQ01380641)
- WG: In "Advanced Configuration" page, Raid settings and Drive Attributes are not numbered properly.(SCGCQ01380646)
- WG: Issues pertaining to "Server is taking long to respond" LSA page.(SCGCQ01383122)
- SCGCQ01395189: WG: "Manage PCIe Storage Interface" displays empty table for MR Ventura controller with profile id 13.(SCGCQ01395189)
- WG: LSA is displaying loop-back address in remote discovery page while accessing LSA with IPV6 address.(SCGCQ01415223)
- WG: Question mark missing in "Erase" confirmation form.(SCGCQ01415923)
- WG: Extra "." (dot) has to be removed in VD Initialization confirmation message and one more cosmetic issue.(SCGCQ01428137)
- WG: Instance Validation is failing for driveGroupConfigurationService-schema.json in MR_Ventura card.(SCGCQ01443739)
- MR7.4_Alpha_LSA crashed when trying to download firmware RHEL 7.4.(SCGCQ01447240)
- LSA Client Refresh issue while making more than one drive(s) offline when RLM is in progress.(SCGCQ01449870)
- WG: No success /failure Notification is shown in server summary page on making a offline drive online.(SCGCQ01451575)
- WG:2 Spans(Modify Span Depth) is showing in "Advance configuraton" page even if their is no PD left for the config.(SCGCQ01452129)
- WG:when flashing FW with 16 mb/32 mb.ROM file , LSA throws inappropriate message.(SCGCQ01464425)
- SCGCQ01479375: LSA WebGui: "logs.txt" is generated in logs directory after fresh installation in Linux.(SCGCQ01479375)
- WG: LSA takes some time (2-3 min) in order to display the remote server page after multiple service restarts.(SCGCQ00903348)
- LSA should not allow to select the check box of VD and PD simultaneously on xSDS-None mode.(SCGCQ01323724)
- Issue : Instant Secure erase option is seen when FDE and NON-FDE drives are selected.(SCGCQ01326164)
- SCGCQ01332799: Resolve LSA server compilation issue.(SCGCQ01332799)
- LSA conf file not being updated While changing the default port 2463 and 9000 to some other free ports in windows_8.1_x64.(SCGCQ01375895)
- WG: "?" symbol is in the centre of the Drive erase page unlike in other pages.(SCGCQ01383763)
- WG: ESXi server name is not completely visible in Manage Servers page.(SCGCQ01389332)
- WG: UI Enhancement: Hand symbol has to be given for the "Modify VD" icon for better user experience.(SCGCQ01389343)
- Foreign Configuration issues locked and unlocked foreign drives count.(SCGCQ01391010)
- Action successful message needs to be modified for better User experience.(SCGCQ01392057)
- spandepth need one space between span & depth, to look uniform across the application.(SCGCQ01413225)
- Hide all Vd's in a DG is not working when there is Erase operation is in progress in one of the VD in the same DG.(SCGCQ01423352)
- LSA is not Displaying Both the Foreign Configurations (Encrypted and Unencrypted) for Import/Clear/re scan.(SCGCQ01460076)
- WG: Hide all Vd's in a DG is not working when there is Erase operation is in progress in one of the VD in the same DG.(SCGCQ01394281)
- WG: Help link for "Activate Features" after providing the Activation key is not working.(SCGCQ01398969)
- SCGCQ01424621: PD serial number getting truncated on few PDs.(SCGCQ01424621)
- Added the "?" at the end of instant secure erase. But there no issue related line in more actions panel please find the attached screenshot.(SCGCQ01442352)
- Fixed: LSA app UI cannot be opened when connect M.2 NVME SSD(via HSBP) to LSI 9460-16i/9440-8i.(SCGCQ01474461)
- 'X' symbol for removing physical drives are not highlighted when the drives are allowed to be removed.(SCGCQ01350436)
- API performance Issues pertaining to LSA Build 004.005.000.000( VMware esxi 6.5 ): Raid Mode with JBOD drives.(SCGCQ01467754)

EnhancementRequests:
- Add "Incompatible with Profile" event.(SCGCQ01289924)
- SLIR3: Change build scripts and makefiles to account for change in directory structure and new name of the library.(SCGCQ00293713)
-.(SCGCQ01389581)
- LSA Page tab name should be changed.(SCGCQ01401514)
-.(SCGCQ01416369)
- Upgrade of OpenSSL binaries to openssl-1.0.2l.(SCGCQ01444590)
- Add a new structure to provide OEMs ability to switch to select either I2C or PCIe as an out of band transport.(SCGCQ01445048)
- Update description of MR_DCMD_CTRL_PERSONALITY_SET Dcmd.(SCGCQ01467149)
- SLIR3: Remove Libsysfs dependency in StoreLibIR3.(SCGCQ00293709)
- Adding Solaris and Sparc X64 bit support in SLIR3.(SCGCQ00922699)
- Change library name to SLIT.(SCGCQ00933175)
-.(SCGCQ01309820)
- LSA Server : [Lenovo Purley] Adding tape drive support to Unified LSA for IT Ventura controllers.(SCGCQ01352474)
- HBA nvdata version in Decimal Format in LSA.(SCGCQ01365643)
- WG: Dedicated Hot spare Notification pop-up alignments.(SCGCQ01401505)
- Schedule API changes for time consuming APIs.(SCGCQ01422386)
- MR7.4: Support for FW ER:SCGCQ01389581 in LSA Server.(SCGCQ01428115)
- Update the WebServer Nginx to fix the latest Security Vulnerabilities.(SCGCQ01452493)
- SAS3 Ph8 --- Update Attribution Language - Copyright, Trademark, Confidentiality to Avago.(SCGCQ00729472)
- LSA Client: Handle Progress events without initiating individual API calls.(SCGCQ01416371)
- LSA: Make operation call with query parameter.(SCGCQ01424479)
- Add Test Link Diagnostic API.(SCGCQ01436268)
- WG: Landing page - Graphics improvements.(SCGCQ01401517)
-.(SCGCQ01412749)
- Support for FW ER:SCGCQ01389581 in LSA Client.(SCGCQ01428113)
- LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n.(SCGCQ01563340)
- LSA7.3: LSA to hide the Empty back plane based on the property field in the LSA.conf file.(SCGCQ01312022)
- LSA: Make operation call with query parameter.(SCGCQ01416374)
- Added MR_MFC_DEFAULTS.NVMeAbortTO and MR_MFC_DEFAULTS.NVMeMaxControllerResetTO.(SCGCQ01532045)
- SCGCQ01250909 - [Lenovo Purley] - Retrieve Boot Events and Maintain it as part of Event History.(SCGCQ01291488)
- Client: EPMR12 porting to MR7.3.(SCGCQ01304973)
- Client: Provide pending profile details in LSA.(SCGCQ01331947)
- LSA Server: EPMR12 defect/feature porting to MR7.3.(SCGCQ01307382)
-.(SCGCQ01356193)
-.(SCGCQ01375857)
- WG: In Remote discovery page Self server is always listed in the last.(SCGCQ01378666)
-.(SCGCQ01472631)

CSETActivities:
- VMware LSI Out of Box driver feature reconciliation.(SCGCQ00696009 port of SCGCQ00652798)
- Provide a StoreLibIR2 deb package to work on Ubuntu.(SCGCQ00795333 port of SCGCQ00630108)
- WG: No Units are displayed for Event ID: 545: Information about super cap health.(SCGCQ01297685 port of SCGCQ01291338)
- LSA throws inappropriate error while attempt to start controller firmware upgrade when pinned cache present on controller.(SCGCQ01297819 port of SCGCQ01288364)
- CSCvd88927 - LSA is displaying drives' type string inconsistently for HDD/SSD so it needs to display consistently.(SCGCQ01331599 port of SCGCQ01316465)
- Hercules_LSA: Event ID-565 does not have any description, shows 0.(SCGCQ01336569 port of SCGCQ01313804)
- Cisco_HSW_Validation_LSA : Expand option can be taken off for degraded R5 volume.(SCGCQ01337104 port of SCGCQ01332737)
- Hercules LSA : Schedule CC button does not allow to click on the whole button.(SCGCQ01339214 port of SCGCQ01337027 )
- PR on all drives are not aborted properly until page refresh is done.(SCGCQ01342568 port of SCGCQ01340808)
- No. of steps shown in "Modify Drive Group" page is not correct.(SCGCQ01343651 port of SCGCQ01341921)
-.(SCGCQ01345364 port of SCGCQ01342479)
- Foreign Import page shows wrong data for the importable LD's.(SCGCQ01345398 port of SCGCQ01332912)
- LSA: LSA should ignore the BBU/SuperCap VPD info failures as it is not a mandatory information.(SCGCQ01347171 port of SCGCQ01346904)
- LSA: LSA should ignore the BBU/SuperCap VPD info failures as it is not a mandatory information.(SCGCQ01347220 port of SCGCQ01346908)
- LSA: LSA should ignore the BBU/SuperCap VPD info failures as it is not a mandatory information.(SCGCQ01347221 port of SCGCQ01346908)
- Cisco_HSW_Validation_LSA: "Simple Configuration" page that appears after creating a simple config is blank.(SCGCQ01347224 port of SCGCQ01345554)
- Cisco_HSW_Validation_LSA: Character limit warning for VD name is not shown while modifying the VD during VD creation.(SCGCQ01347232 port of SCGCQ01345557)
- Cisco_HSW_Validation_LSA: VD Size limit check is not working when user modifies the value of the size.(SCGCQ01350834 port of SCGCQ01346906)
- Cisco_HSW_Validation_LSA: Prepare for removal menu is still displayed even after the option is selected and event is updated.(SCGCQ01350837 port of SCGCQ01338290)
- "%" symbol followed by integer value should not be allowed for the user to enter the size during VD creation.(SCGCQ01350844 port of CGCQ01349556)
- Page scroll doesn't work after VD creation when BG processes on VD are expanded in LSA page.(SCGCQ01351383 port of SCGCQ01349487)
- VD creation fails when a partial VD is added with decimal value & with 1MB strip size to an existing DG.(SCGCQ01354306 port of SCGCQ01348005)
- Security Key provided for importing Foreign Config is not taken by LSA.(SCGCQ01369266 port of SCGCQ01331016)
- Unexpected sense PD messages are flooded in storage log when drive is in spun dwon mode.(SCGCQ01369267 port of SCGCQ01264499)
-.(SCGCQ01375259 port of SCGCQ01373451)
- LSA: Client should not show Unlock drive option if no drives are in locked state.(SCGCQ01378557 port of SCGCQ01331121)
- LSA Server: Windows Make file check-in.(SCGCQ01384621 port of SCGCQ01384618)
- RWC3 Package: Check-in of SL-IT to the package folder.(SCGCQ01384895 port of SCGCQ01384890)
- Cisco_LSA: 'vdname' parameter is missing in the event description that is generated whenever a volume property is modified.(SCGCQ01387017 port of SCGCQ01350435)
- Disabled Phy is not populated from the server when we fire /phys uri.(SCGCQ01389917 port of SCGCQ01389892)
- SCGCQ01385340: Health is not coming proper after foreign config import.(SCGCQ01389918 port of SCGCQ01385340)
- HPE: Un-installation is not removing the folder(s) after performing the Download Diagnostics operation.(SCGCQ01389925 port of SCGCQ01385453)
- WG: Message displayed after flashing the controller FW has to be modified for better presentation - Enhancement.(SCGCQ01391318 port of SCGCQ01389483)
- Hercules LSA : LD properties shows Cachecade Enabled after disabling cache cade.(SCGCQ01419753 port of SCGCQ01417215)
- WG: LSA takes some time (2-3 min) in order to display the remote server page after multiple service restarts.(SCGCQ01440910 port of SCGCQ00903348)
- MR 7.3.1_LSA fails to find server when there is no network.(SCGCQ01500133 port of SCGCQ01482320)
- Cisco - CSCvh55470 - LSA should display proper message for ESXi after LBP/Talladega firmware upgrade/downgrade.(SCGCQ01566052 port of SCGCQ01562368)
- SWR: Device ID is not displayed in LSA..(SCGCQ01566241 port of SCGCQ01564621)
- Changing ini file name to storelibconfit.ini.(SCGCQ01275670 port of SCGCQ01275496)
- For phys-schema.json fails for "([0, u'properties', u'isEnabled', u'enum'], 'False ...".(SCGCQ01309844 port of SCGCQ01304900)
- LSA not allowing to create RAID with 1M strip using 4K drives.(SCGCQ01323613 port of SCGCQ01284395)
- LSA pops-up (504 : Gate Time-out) with StorCLI script to start-stop locate drives with JBOD-Hotspare conversion on.(SCGCQ01324865 port of SCGCQ01260226)
- LSA crashed on pulling out 23 drives connected with 64 LD's in multiple controllers.(SCGCQ01338337 port of SCGCQ01331755)
- Hercules LSA : Cachecade SSD caching should be "enabled" under controller properties.(SCGCQ01339133 port of SCGCQ01337029)
- Hercules LSA : WB and AWB description in LD create page not proper.(SCGCQ01339213 port of SCGCQ01337026)
- User couldn't enter his value in seconds for locating a physical drive.(SCGCQ01344082 port of SCGCQ01332742)
- Cisco_HSW_Validation_LSA: Tooltip for "Simple Configuration" is not shown when other options displays it.(SCGCQ01347225 port of SCGCQ01346851)
- Cisco_LSA: Hyperlink symbol can be shown for "Compare and select" link in Modify Drive Group.(SCGCQ01350847 port of SCGCQ01348107)
- Cisco_HSW_Validation_LSA: Naming convention can be made same across all "Virtual Drive Erase" forms.(SCGCQ01350850 port of SCGCQ01347250)
- cosmetic changes required in "Advanced configuration" page.(SCGCQ01350851 port of SCGCQ01347253)
- DG health is not populated properly in cisco cards.(SCGCQ01350892 port of SCGCQ01349625)
- Virtual Drive Erase form is not closed when it is opened for the second time.(SCGCQ01351381 port of SCGCQ01347243)
- While adding drives to any raid group, Displaying no. of available drives and selected drives can be fine tuned.(SCGCQ01351385 port of SCGCQ01348115)
- Cisco_LSA: "Background Initialization" is misspelled in Event description & one more cosmetic change is required.(SCGCQ01351454 port of SCGCQ01348041)
- In case of FW upload, LSA crash seen with big FW version name.(SCGCQ01351457 port of SCGCQ01338340)
- LSA Client: During the exclusion of the VDs from deletion of one VD leading to the deletion of all the VDs.(SCGCQ01354432 port of SCGCQ01344115)
- WG: Error message is not proper if the username is not provided while verifying server in Manager server page.(SCGCQ01387009 port of SCGCQ01379795)
- Hercules:LSA:Observe that instead of "Feedback " it is named as "FeedBack ".(SCGCQ01389091 port of SCGCQ01388943)
- Updated PD firmware version is not reflecting even after LSA refresh.(SCGCQ01392422 port of SCGCQ01382013)
- SCGCQ01385340: Health is not coming proper after foreign config import.(SCGCQ01393239 port of SCGCQ01385340)
- Hercules LSA: "Prepare for removal" feature should be disabled for drives in LSA.(SCGCQ01401490 port of SCGCQ01396735)
- Activity to check-in build files.(SCGCQ01514879 port of SCGCQ01514834)
-.(SCGCQ01520055 port of SCGCQ01508528)
- Activity to check-in AutoBST files to new MR 7.5 streams.(SCGCQ01564703 port of SCGCQ01564674)
- Updating readme file.(SCGCQ01294583 port of SCGCQ01294570)
- For spares-schema instance validation failed for "u'foreign' is not one of [u'NATIVE', u'FOREIGN', u'MIXED']".(SCGCQ01311504 port of SCGCQ01309617)
- LSA server:LSA not showing the server reboot message after profile set.(SCGCQ01316473 port of SCGCQ01316342)
- HSW_testing_LSA : Could not initialize a VD after disabling and enabling again "Initialize" option.(SCGCQ01321339 port of SCGCQ01309783)
- Cisco_HSW_Validation_LSA : Expand option can be taken off for degraded R5 volume.(SCGCQ01337071 port of SCGCQ01332737)
- Cisco_HSW_Validation_LSA: Size range warning is not shown when user is giving value beyond the limit in MB unit.(SCGCQ01352603 port of SCGCQ01352603)
- LSA not allowing to create RAID with 1M strip using 4K drives.(SCGCQ01369283 port of SCGCQ01284395)
- RWC3 Automation Script files check-in.(SCGCQ01385008 port of SCGCQ01384997)
- LSA/RWC Automation batch files check-in.(SCGCQ01386218 port of SCGCQ01386214)
- Hercules:LSA: trying to open in new tab : "Copyright @ 2017 by Avago Technologies. All Rights Reserved" loads blank page.(SCGCQ01389089 port of SCGCQ01386140)
- Adding tape drive support to Unified LSA for IT Ventura controllers.(SCGCQ01389588 port of SCGCQ01352480)
- SCGCQ01385340: Health is not coming proper after foreign config import.(SCGCQ01392429 port of SCGCQ01385340)
-.(SCGCQ01392506 port of SCGCQ01391775)
- [Lenovo 17B] - LSA- Selected Firmware version doesn't match while upgrading the FW.(SCGCQ01420040 port of SCGCQ01417199)
- Hercules:LSA: Multiple OLH links are opening when clicked on Advance configuration( IE Browser).(SCGCQ01429992 port of SCGCQ01415979)
- LSA Linux BST Automation scripts.(SCGCQ01466009 port of SCGCQ01447013)
- operations-schema.json fails for "u'percentage' is a required property..." in xSDS mode.(SCGCQ01297806 port of SCGCQ01291332)
- Hercules LSA : Auto refresh not happening on Enclosure push pull with 64 VD's configured.(SCGCQ01297821 port of SCGCQ01276760)
- SCGCQ01309545: WG: Issues pertaining to Event ID: 545: Super Cap Health event has redundant data, missing comma's.(SCGCQ01332698 port of SCGCQ01309545)
- Foreign Import page shows wrong data for the importable LD's.(SCGCQ01338335 port of SCGCQ01332912)
- Cisco Validation: FW throws an exception while scheduling Consistency check on R1.(SCGCQ01347254 port of SCGCQ01340788)
- VD size is created with improper size when user creates volume by first decreasing and increasing the size in MB unit.(SCGCQ01350833 port of SCGCQ01346860)
- WG: Hide all Vd's in a DG is not working when there is Erase operation is in progress in one of the VD in the same DG.(SCGCQ01395078 port of SCGCQ01394281)
- Wrong API populated for enclosures operations and schema will fail.(SCGCQ01445408 port of SCGCQ01444689)
- WG: LSA events displays invalid details for unexpected sense events.(SCGCQ01447743 port of SCGCQ01445719)
- WG: the controller operations Query param : 4 has 'premium feature' and 'pinned cache' URI's GET calls in response.(SCGCQ01458204 port of SCGCQ01443879)
- Cisco - CSCvg96681 - LSA-3.163 should display proper message after logout.(SCGCQ01531153 port of SCGCQ01521114)
- MR/IR: Controller Device ID value mismatch in LSA.(SCGCQ01566055 port of SCGCQ01564622)
- Hercules_LSA: Event ID-565 does not have any description, shows 0.(SCGCQ01336556 port of SCGCQ01313804)
- LSA: LSA should ignore the BBU/SuperCap VPD info failures as it is not a mandatory information.(SCGCQ01347125 port of SCGCQ01346904)
- Cisco_HSW_Validation_LSA: Credentials asked during login is not proper when login mode is set to 'Domain Login'.(SCGCQ01347233 port of SCGCQ01341930)
- Hercules-LSA : Updated PD firmware version is not reflecting automatically.(SCGCQ01393283 port of SCGCQ01392496)
- Hercules:LSA: Linux RHEL 6.9: View Event Logs Icon display not proper.(SCGCQ01414738 port of SCGCQ01409445)
- Hercules LSA: Reference to "drive group" while adding logical drive to existing array.(SCGCQ01444720 port of SCGCQ01444670)
- LSA: During the installation "Range of Events" selection is not reflecting in the LSA.conf file.(SCGCQ01472166 port of SCGCQ01472048)
- SCGCQ01479375: LSA WebGui: "logs.txt" is generated in logs directory after fresh installation in Linux.(SCGCQ01480902 port of SCGCQ01313228)
- Fixed: Drive group Migration was disabled with NVME drives DG.(SCGCQ01313228 port of SCGCQ01289586)
- LSA pops-up (504 : Gate Time-out) with StorCLI script to start-stop locate drives with JBOD-Hotspare conversion on.(SCGCQ01324864 port of SCGCQ01260226)
- Spare URI does not respond on iMR Invader.(SCGCQ01378677 port of SCGCQ01376605)
- [PA_2017B_SDV_Lenovo_x3650 M4_Storage] LSA tool update FW Image (oss: 75871) Failed for N2225 SAS HBA(Outback-2) card.(SCGCQ01408778 port of SCGCQ01408626)
- In Standalone LSA periodic automatic refresh is not happening. To display the latest status do manual refresh.(SCGCQ01411632 port of SCGCQ01397546)
- Hercules LSA : LD properties shows Cachecade Enabled after disabling cache cade.(SCGCQ01417213 port of SCGCQ01415347)
-.(SCGCQ01417223 port of SCGCQ01375862)
- LSA: Make operation call with query parameter.(SCGCQ01423429 port of SCGCQ01416374)
- MR7.3_Focused Regression_Strange character when exceeding max number of Uncof good drives on iMR.(SCGCQ01427110 port of SCGCQ01419325)
- LSA: Upgrade of OpenSSL binaries to openssl-1.0.2n.(SCGCQ01564577 port of SCGCQ01563340)
- LSA crashed on pulling out 23 drives connected with 64 LD's in multiple controllers.(SCGCQ01345397 port of SCGCQ01331755)
- Selected firmware version is coming empty for IR/IT/IMR controller.(SCGCQ01354345 port of SCGCQ01321474)
- Hercules LSA: Default write policy for R1 CC VD should be WB instead of WT.(SCGCQ01401352 port of SCGCQ01397557)
- [Lenovo 18A] 110340 - [PA_2017B_SDV_Lenovo_Red_Reno_Storage] Use LSA to configure M5225 and it fail to create VD's from LSA.(SCGCQ01424599 port of SCGCQ01421451)
- Hercules- LSA : VD access policy not showing as blocked for SVD on CC VD offline.(SCGCQ01443687 port of SCGCQ01442554)
- Phase 2 changes for Linux VBAS automation script.(SCGCQ01460081 port of SCGCQ01455968)
- LSA : Silent installation is accepting the invalid options also for LSA/HPE/RWC3.(SCGCQ01472265 port of SCGCQ01389392)
- CSCvd28635: LSA throws inappropriate error while attempt to start patrol read on virtual drive with SSDs.(SCGCQ01319398 port of SCGCQ01284997)
- WG: Trying to import Encrypted VD with Drive security disabled results in error code: 0x11005, it provides No Details to user.(SCGCQ01332824 port of SCGCQ01325783)
- To resolve the merge conflict.(SCGCQ01348161 port of SCGCQ01348057)
- Port Info disappears on doing Drive push pull.(SCGCQ01404636 port of SCGCQ01379323)
- Upgrade of OpenSSL binaries to openssl-1.0.2l.(SCGCQ01444595 port of SCGCQ01444590)
- LSA Windows BST Automation scripts.(SCGCQ01472059 port of SCGCQ01460401)
- LSA 7.6:LSA does not provide the Stop rebuild option in the action pane once the rebuild operation is in progress in Rhel 7.4.(SCGCQ01557665 port of SCGCQ01555955)


3.023.000.000 - Moderate Impact
-------------


2.090.000.000 - Moderate Impact
-------------
Enhancement:
- Added Support for ThinkSystem HBA and RAID adapters


2.085.000.000 - Moderate Impact
-------------
- Fixed issue where logs incorrect when remove/insert hdd (SCGCQ01246085)
- Fixed Invalid Server Id as part of event, if server is not in network (SCGCQ01261779)
- Fixed issue where moving PD from slot 0 to another slot, PD slot ID usually still show slot 0 and slot format (SCGCQ01264554)
- Fixed issue where external enclosure serial number in not consistent between LSA, MSM and storcli (SCGCQ01268914)
- Fixed issue where LSA does not list Raid 10 as configurable raid level under configuration service uri when drive mixing is allowed (SCGCQ01037806)
- Fixed issue where Incorrect configurable Volume sizes displayed in LSA for Raid 0(SCGCQ01039518)
- Fixed issue where LSA is not un-installing through the Uninstall-LSA option through Windows All Programs (SCGCQ01039698)
- Fixed issue where VD Properties in LSA was not getting populated for default settings (SCGCQ01043610)
- Fixed issue where controllers/{id}/spares is not populated correctly (SCGCQ01056900)
- Fixed issue where LSA displays only 2 enclosures when four enclosures are connected. (SCGCQ01061548)
- Fixed issue where Enclosure more properties displays "Number of Voltage Sensors" as "0" (SCGCQ01063504)
- Fixed issue where On Number of Temperature Sensors observe that temperature mentioned has 65535 C. (SCGCQ01063924)
- Fixed issue where When the PD is in GHS state LSA is displaying the Prepare for removal option (SCGCQ01064282)
- Fixed issue where LSA does not display the access policy 'hidden' in View Event Logs. (SCGCQ01065622)
- Fixed issue where schedule patrol -read throws an error 'Invalid URI parameter' when user clicks on Finish button. (SCGCQ01066126)
- Fixed issue where Unable to migrate from secured Raid1 VD to Raid5/Raid 6 VD on LSA (SCGCQ01066154)
- Fixed issue where LSA crashes while trying to add a VD to the RAID 00 drive group. (SCGCQ01069405)
- Fixed issue where Simple configuration fails while trying to create VD using SSD Drive (SCGCQ01069412)
- Fixed issue where compared with MSM values of "Date of manufacture" and "Type" is varying. (SCGCQ01069493)
- Fixed issue where Unable to clear or import partial foreign configuration from LSA. (SCGCQ01069580)
- Fixed issue where Ventura: LSA still displays clear button as active even after successfully importing foreign configuration. (SCGCQ01069616)
- Fixed issue where IR3 Events logs are listed reverse sequence in "View Event logs" (SCGCQ01069847)
- Fixed issue where LSA Drive Tab PD "Unconfigured Good" count does not automatically refresh when we Move UG PD to JBOD and vice versa(SCGCQ01069852)
- Fixed issue where Modifying the VD during the VD creation results in option for user to allow more than one cachecade VD, Creation fails (SCGCQ01069898)
- Fixed issue where Instance validation fails for Clear Drive, Stop Clear Drive, Prepare & Undo prepare for removal due to "parameters":{}" (SCGCQ01070441)
- Fixed issue where Instance validation fails for Manage Power Save Settings, Controller PUT operation (SCGCQ01070690)
- Fixed issue where Instance Validation fails for Schedule Consistency Check (SCGCQ01070739)
- Fixed issue where Instance Validation fails for Physical Devices GET (IT controller) (SCGCQ01074960)
- Fixed issue where Server not found warning message is displaying repeatedly one over the other (SCGCQ01075026)
- Fixed issue where Backplane information not displayed under view server profile (SCGCQ01075841)
- Fixed issue where if config cleared during reconfiguration, progress bar does not clear(SCGCQ01075843)
- Fixed issue where hide on DG is not automatically updating the access policy of VDs (SCGCQ01076009)
- Fixed issue where LSA Crashes when we run API performance Script ususally when performing PD Operations GET in Large config (240 PD)(SCGCQ01076023)
- Fixed issue where "Controller Info" of LSA displays driver version of the Gateway server instead of displaying the driver of Vmware server (SCGCQ01076031)
- Fixed issue where "Application Version" in server profile page is displayed as "LSA Server null". (SCGCQ01076146)
- Fixed issue where there were multiple extra columns in PD tab (SCGCQ01077452)
- Fixed issue where the Physical devices are listed in Decreasing order of Device ID instead of ascending order in drive tab (SCGCQ01077563)
- Fixed issue where firmware update does not happen in the Direct agent system from Gateway (SCGCQ01077677)
- Fixed issue where Manage Power save settings with input of " 1 hour" fails with an error " Input Parameters are Invalid" (SCGCQ01078509)
- Fixed issue where Managed Server page provides option of adding gateway server from which we have already logged in to manage server (SCGCQ01078524)
- Fixed issue where Feedback is displayed as FeedBack in LSA. (SCGCQ01079092)
- Fixed issue where After adding server in Manage Server Page intermittently get a junk screen  (SCGCQ01079698)
- Fixed issue where back button does not work in case of Advanced Configuration During VD Creation (SCGCQ01079912)
- Fixed issues pertaining to "Set Patrol Read Properties" Number of PD Count allowed for patrol read (SCGCQ01080265)
- Fixed issue where after logging out from server that is been managed. Clicking Server again in managed server page LSA asks for credentials (SCGCQ01080448)
- Fixed issue where Instance Validation fails for PROGRESS related Operations (SCGCQ01082194)
- Fixed issue where Instance validation fails for "/controllers/0/operations/security" URI : Controller Operation POST (SCGCQ01082618)
- Fixed issue where inappropriate error message is displayed in LSA on flashing fw on IT Intruder (SCGCQ01082897)
- Fixed issue where LSA page does not automatically refresh when PD moved from UG bad to UG Good SS page, CC page does not give option (SCGCQ01083060)
- Fixed issue where on clicking save button on mail server page its shift to Alert Settings without saving that page. (SCGCQ01083063)
- Fixed issue where LSA does not show the default power save mode time set in mfc (SCGCQ01083106)
- Fixed issue where after adding server the managed server list, then logging out, new server cannot be logged into. (SCGCQ01083226)
- Fixed issue where LSA service is not present in the Windows services after downgrading LSA. (SCGCQ01084774)
- Fixed issue where Event Response is giving Default Write Policy: abc (SCGCQ01043609)
- Fixed issue where Sending Invalid HTTP verb in the request for an URI fails with 404 instead of 405 (SCGCQ01059216)
- Fixed issue where texts linked to the health icons "optimal", "critical", "needs attention", in server summary page Should be clickable (SCGCQ01063432)
- Fixed issue where LSA still displays physical disk actions and properties menu when no pd is selected after sorting from Enclosure/slot. (SCGCQ01063524)
- Fixed issue where Instance Validation fails for Simple Configuration POST (SCGCQ01064737)
- Fixed issue where consistency check Schedule parameters is available even after selecting the "Disable" from the Consistency check mode (SCGCQ01069825)
- Fixed issue where LSA not accessible through Chrome browser Version 48.0.2564.109 m (SCGCQ01078618)
- Fixed issue where while initiate ISE against 3rd party locked UG drive, XHR_Header code says "POST 200" but XHR_Response says "Er 77" (SCGCQ01080402)
- Fixed inconsistency between the VD properties displayed in STORCLI when compared with other Apps. (SCGCQ01081145)
- Fixed issue where LSA doesn't get updated without a service restart on Vmware server with IR3 controller. (SCGCQ01081324)
- Fixed issue where matching error description is not shown by client when there is a session already active during login. (SCGCQ01063542)
- Fixed issue where LSA login attempt failed for Vmware Server (SCGCQ01064784)
- Fixed issue where 002.010.000.000 build (Gateway & Standalone) is unable to discover server (SCGCQ01069396)
- Fixed issue where replace drive table does not have device Id column (SCGCQ01075112)
- Fixed issue where LSA does not update the data automatically when Delete VD is performed. (SCGCQ01079635)
- Fixed issue where RWC3-LWM (Windows) is unable to send mail to SMTP (SCGCQ01173361)
- Fixed issue where Ventura IT drive push and pull needs services restart to update the count (SCGCQ01066048, Port of SCGCQ01064904)
- Fixed issue where LSA Allows JBOD Drive having OS to be converted to UG drive, doesnt notify the user on the OS present on JBOD (SCGCQ01067253, Port of SCGCQ01052412)
- Fixed issue where LSA displays "error:Not all values are set successfully" while trying to save power save settings on IMR Ventura. (SCGCQ01067711, Port of SCGCQ01057457)
- Fixed issue where LSA shows blank screen after log in with mutiple controller in the setup (SCGCQ01069360, Port of SCGCQ01068813)
- Fixed issue where intermittent update Ventura firmware hang using LSA ( StorCLI is OK ) (SCGCQ01069565, Port of SCGCQ01038421)
- Fixed issue where user unable to migrate from secured Raid1 VD to Raid5/Raid 6 VD on LSA (SCGCQ01070807, Port of SCGCQ01066154)
- Fixed issue where all the events are not getting downloaded while downloading log from LSA (SCGCQ01145261, Port of SCGCQ01139334)
- Fixed issue where no error message is displayed while importing secure EPD through wrong key (SCGCQ01066088, Port of SCGCQ01063911)
- Fixed issue where user unable to clear or import partial foreign configuration from LSA. (SCGCQ01085466, Port of SCGCQ01069580) 

2.030.000.000 - New Function Only/No fixes
-------------





Lenovo Data Center Group Linux OS Support Home Page
linux.lenovo.com

© 2018-2019 Lenovo. All rights reserved

StorCLI command line tool for anyos



StorCLI (Command Line) Utility for Storage Management

Adapters Supported:
  - ThinkSystem 430-8i PCIe 12Gb HBA
  - ThinkSystem 430-16i PCIe 12Gb HBA
  - ThinkSystem 430-8e PCIe 12Gb HBA
  - ThinkSystem 430-16e PCIe 12Gb HBA
  - ThinkSystem 430-8i SAS/SATA 12Gb Dense HBA
  - ThinkSystem RAID 930-8i 2GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-16i 8GB  Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-24i 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-8e 4GB Flash PCIe 12Gb Adapter
  - ThinkSystem RAID 930-4i 2GB Flash Flex Adapter
  - ThinkSystem RAID 730-8i 1GB Cache PCIe 12Gb Adapter 
  - ThinkSystem RAID 730-8i 2GB Cache PCIe 12Gb Adapter
  - ThinkSystem RAID 530-8i PCIe 12Gb Adapter
  - ThinkSystem RAID 530-16i PCIe 12Gb Adapter
  - ThinkSystem RAID 530-8i Dense Adapter
  - ThinkSystem RAID 530-4i 4GB Flex Adapter
  - ServeRAID M1215 SAS/SATA Controller for Lenovo System x (46C9114)
  - ServeRAID M1210 SAS/SATA Controller for Lenovo System x  
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x880 X6 Compute Node
  - ServeRAID M1210e SAS/SATA Controller for Lenovo x240 M5 Compute Node
  - ServeRAID M5225-2GB SAS/SATA Controller
  - ServeRAID M5210e SAS/SATA Controller for System x
  - ServeRAID M5210 SAS/SATA Controller
  - ServeRAID M5215 SAS/SATA Controller (00JX142)
  - ServeRAID M5115 SAS/SATA Controller (90Y4390)
  - ServeRAID Lenovo Storage Expansion Node (65Y8588)
  - ServeRAID M5110 SAS/SATA Controller for Lenovo System x (81Y4481)
  - ServeRAID M5110e SAS/SATA Controller for Lenovo System x 
  - ServeRAID M5120 SAS/SATA Controller for Lenovo System x (81Y4478)

NOTE TO SERVICE - Reference RETAIN #N/A

007.0713.0000.0000  - Moderate Impact/Low Probability of Occurrence
--------------------
 - Storcli returns error for show file commands when parsing MR images eventhough the command was successful(SCGCQ01529009) 
 - "Cached Virtual Drives" displayed in /c0/dall show cachecade without the table.(SCGCQ01537017) 
 - storcli /c0 set sasaddhi =xxxx sasaddlow =xxxx displays incomplete sasaddress(SCGCQ01540807) 
 - storcli controller show all lists EPD's in VD list(SCGCQ01556595) 
 - controller show all command is not listing the Battery information(SCGCQ01561689) 
 - Commands "/call/all" return inappropriate message or segfault when both MR and IT controllers are connected(SCGCQ01561703) 
 - Instance Validation Failed between "vd-operations-migrate-schema.json" and "start migrate" JSON output.(SCGCQ01571207) 
 - Storcli: drive-group-security-schema.json is not present in the JSON Schema folder(SCGCQ01571280) 
 - Storcli: Instance Validation Failed between "drive_group_mirror_schema.json" and "/call/dall add mirror src=0" JSON output.(SCGCQ01571298) 
 - Instance Validation Failed "foreign-configuration-detailed-schema.json" and "/call/fall import preview" JSON output(SCGCQ01571393) 
 - "drive-power-on-schema.json" is named as "drive-get-power-on-schema.json" in "Schema_mapping_list" file.(SCGCQ01573229) 
 - Get VPD from MPB region is failure, but overalll status shows success(SCGCQ01589618) 
 - BBU-show-schema is not present in the schema mapping list, the list needs to be sorted to remove duplicate commands.(SCGCQ01599473) 
 - Coverity defect fixes for Uninitialized Variables, resource leaks(SCGCQ01600257) 
 - Spell mistake in error message for hwdev command(SCGCQ01614972) 
 - Coverity defect fix for itctflash file(SCGCQ01616369) 
 - Fixing coverity issues - Resource leaks - Part 5(SCGCQ01627961) 
 - Fixing coverity issues - Non array deletes - Part 6(SCGCQ01629478) 
 - CLI help does not reflect the new command to create an ePD(SCGCQ01639583) 
 - ModeE drive fw download not working when drive image is more than 32K(SCGCQ01681086) 
 - Space need in the output for Deprecated command in storclif64.exe when legacy Cli command is used(SCGCQ01687653) 
 - Grammatical mistakes in Perccli Un-supported RAID level warning message.(SCGCQ01714033) 
 - storclif /c0 start diag type=0, gives syntax error(SCGCQ01714663) 
 - Correcting the grammatical errors in firmware's MFI Stat messages(SCGCQ01717315) 
 - Unified StorCLI 7.7 : Unconfigured BAD drives are not displayed in /c0 show output(SCGCQ01718269) 
 - MR 7.7 - Storcli throws an incorrect error msg while importing foreign config from Raid to JBOD mode.(SCGCQ01718981) 
 - Unmap property is not displayed for a drive in drive show all command output(SCGCQ01720959) 
 - Unified StorCLI 7.7 : StorCLI should allow noreset option when current NVDATA is lesser than the new NVDATA for SAS3.5 IT(SCGCQ01727159) 
 - Enclosure show status command gives success but nothing is shown(SCGCQ01731280) 
 - Unified StorCLI 7.7 : StorCLI doesn't report failure status when nopad image flashing fails via completeflash command in MR(SCGCQ01749849) 
 - Help content for jbodx show unmap is not present(SCGCQ01790130) 
 - One of the requirement for Criteo is to display JBOD-WB (EPD) to OS drive mapping.(SCGCQ01804763) 
 - Turn on the boodrive by storcli, HII does not reflect it, still shows "Off"(SCGCQ01816927) 
 - Incorrect Interface Details for "storcli /c0 show" command(SCGCQ01837612) 
 - MR API - Incorrect value used for MR_DCMD_CTRL_SNAPDUMP_ONDEMAND(SCGCQ01882581) 
 - storclio command not working to update FW on SATA disk(SCGCQ01918814) 
 - Storcli- Delay seen in /c0 /vall show all o/p(SCGCQ01935697) 
 - Phase3 Beta PCIe: Loading SLOOB fails with error message "ExitLib failed for SAS IT Controller!! rval 0x801A"(SCGCQ01292964) 
 - storcli /cx/pall show command fails with older generation cards that does not support PCIe pages(SCGCQ01520816) 
 - Storcli: vd-delete-schema.json is not present in the JSON Schema folder(SCGCQ01571254) 
 - Instance Validation Failed between "controller-properties-schema.json" and "/call show" JSON output.(SCGCQ01573076) 
 - Unified LibMods : Fixing coverity issues - Resource leaks and Uninitialized variables - Part 2(SCGCQ01600381) 
 - Unified LibMods : Coverity fixes for uninitialized variables in File functions - Part 4(SCGCQ01606830) 
 - Checking in VBAS compliation changes(SCGCQ01630324) 
 - PERCCLI ePD personality behavior command is still an available option and has not been removed(SCGCQ01639798) 
 - Instance Validation Failed "system-schema.json" and "storcli64.exe show all" JSON output.(SCGCQ01640825) 
 - Storcli: VD creation fails from storcli in presence of 0KB bad drive .(SCGCQ01713240) 
 - Space need in the output for secure erase(SCGCQ01713604) 
 - PA2-MR7.7-StorCLI: "storcli /c0/v239 start migrate type=raid0 option=add drives=66:18" gives syntax error(SCGCQ01713681) 
 - Drive Listing Is Not In Order for "/c0 show" & "/c0/eall/sall show"(SCGCQ01714356) 
 - StorCLI 7.702 help for SnapDump is not clear(SCGCQ01715025) 
 - IT Fw Download command StorCLI /c0/eall/sall hang(SCGCQ01723226) 
 - Unified StorCLI Phase 8 : No help section for ForceHCB option(SCGCQ01731292) 
 - Unified CLI 7.7 : Fixing coverity issues - Resource leaks,Unused variables,and non-array deletes - Part 1(SCGCQ01732959) 
 - Unified StorCLI Phase 8 : Firmware downgrade should be supported only by StorCLIO for SAS3 IT controllers(SCGCQ01734559) 
 - Storcli does not display the complete enclosure serial number(SCGCQ01735493) 
 - Storcli vib update fails across releases.(SCGCQ01761795) 
 - StorCLI doesn't call SL_EXIT_LIB in VMware environment for MR Controllers(SCGCQ01775602) 
 - StorCLI enable/disable unmap VDs return status as failed instead of successful(SCGCQ01803306) 
 - Removing the set/show of unmap on JBOD.(SCGCQ01817855) 
 - Unified StorCLI 7.6 : Read SBR fails with pre-ventura controllers(SCGCQ01539360) 
 - Storcli: Instance Validation Failed between "drive-group-detailed-schema.json" and "/call/dall show all" JSON output.(SCGCQ01571287) 
 - Instance Validation Failed between "foreign-configuration-schema.json" and "/call/fall show" JSON output.(SCGCQ01571391) 
 - Instance Validation Failed between "controller-detailed-properties-schema.json" and "/call show all" JSON output.(SCGCQ01573096) 
 - "drive-security-key-schema.json" is named as "drive-securitykey-schema.json" in "Schema_mapping_list" file.(SCGCQ01573226) 
 - CLI does not report Serial number for Enclosure.(SCGCQ01595640) 
 - Json schema for enclosure phyerrorcounters has not been added, output format needs modification.(SCGCQ01595673) 
 - Unified StorCLI 7.7 : SAS Phyloopback test reports false positive results(SCGCQ01624063) 
 - Update help contents for jbod delete(SCGCQ01624605) 
 - Drive download commands help syntax to be updated for IT.(SCGCQ01681089) 
 - Grammatical error in Perccli warning message during FW Flash.(SCGCQ01686670) 
 - Missing punctuation in Perccli delete config message(SCGCQ01698226) 
 - Personality Behavior Modes:Command returns failure when setting non-RAID behavior modes.(SCGCQ01713265) 
 - Unified StorCLI Phase 8 : NVMe and SAS Drive's WWN is incorrect for IT Controller(SCGCQ01749795) 
 - Storcli is not showing foreign configs if user has SED drive which is in foreign(SCGCQ01937410) 
 - controller show wbsupport reason is not listed in the cli output(SCGCQ01561704) 
 - Application crashes while executing storcli64.exe /c0/dall set hidden=on(SCGCQ01571256) 
 - Instance Validation Failed between "system-schema.json" and "show all" JSON output.(SCGCQ01571961) 
 - Unified StorCLI 7.7 : Coverity issues - Resource leaks,Uninitialized variables,and dead code - Part 1(SCGCQ01600195) 
 - Drive Fw download Coverity fixes(SCGCQ01615074) 
 - Unified StorCLI 7.7 : StorCLI should not issue SL_SET_LIB_PARAMETERS command(SCGCQ01676983) 
 - Detailed status is not displayed on locating a drive which is not connected to IT card.(SCGCQ01571154) 
 - Coverity defect fixes for Memory Leak, Uninitialized pointers(SCGCQ01605182) 
 - storclio need to support proprietary i2c controller mode.(SCGCQ01732990) 
 - MR7.7 LSA 4.180.0 enclosure type is not matched with storcli(SCGCQ01747333) 
 - Coverity libmods issues - Resource leaks and Wrong sizes(SCGCQ01600208) 
 - Unified StorCLI 7.7 : MegaCLI commands report command status code in UEFI environment(SCGCQ01624506) 
 - storcli did not show current profile when connection in invalid config.(SCGCQ01713676) 
 - Unmap support mfc bit and fde type mixing fields needs to be updated when extracting factory settings and also while modifying factory settings(SCGCQ01640217) 	
 - non-RAID:HII:CLI:Dedicated Hot Spare creation displays incorrect disk group association.(SCGCQ01698272) 
 - DHS:Unable to add dedicated Hot Spare drive to specified DG.(SCGCQ01714443) 
 - WWN for NVME PDs is reported as NA with MR(SCGCQ01731279) 
 - Updating the Diag results as per new API changes(SCGCQ01537255) 
 - Resource leaks,Uninitialized variables(SCGCQ01600311) 
 - Unified CLI : Coverity fixes for Uninitialized variables,resource leaks,and dead code handling - Part 3(SCGCQ01606785) 
 - Unified StorCLI 7.7 - Fixing coverity issues Resource leaks,Non-array deletes - Part 2(SCGCQ01757433) 
 - Storcli: UEFI shell error display-Error: Unsupported File open Mode.(SCGCQ01837752) 
 - Removal of ncurses references for linux makefile(SCGCQ01955544) 
  - Changing ini file name to storelibconfit.ini(SCGCQ01275669 port of SCGCQ01275496) 
 - Changing ini file name to storelibconfit.ini(SCGCQ01275670 port of SCGCQ01275496) 
 - Enumeration of drives in NGM[PERCCLI Implementation / HBA330 Mini Mezz](SCGCQ01529059 port of SCGCQ01458174) 
 - Storcli PR help execution delay is missing when PR running continuously(SCGCQ01537219 port of SCGCQ01534552) 
 - Handle memory leaks in getSortedPdList(SCGCQ01571890 port of SCGCQ01283497) 
 - Disk sorting based on connector name, slot and position(SCGCQ01571926 port of SCGCQ01307257) 
 - Collecting snapdump through StorCli(SCGCQ01594186 port of SCGCQ01581899) 
 - Unified StorCLI 7.6 : Creation of VD aborts StorCLI when FW returns error code for MR_DCMD_CFG_READ DCMD(SCGCQ01595361 port of SCGCQ01588245) 
 - Allow "noreset" option for IT controllers during firmware download(SCGCQ01599545 port of SCGCQ01514483) 
 - Enumeration of drives in NGM[PERCCLI Implementation / HBA330 Mini Mezz](SCGCQ01600137 port of SCGCQ01458174) 
 - StorCLI should not display SED property when using IT-HBA(SCGCQ01600142 port of SCGCQ01589445) 
 - Cutlass Phase 16 Storcli: Partner device ID should be suppressed under ./storcli /c0/eall show for multipath connections(SCGCQ01619201 port of SCGCQ01606780) 
 - Storcli should not create a snapdump image if there is no valid image(SCGCQ01624677 port of SCGCQ01623883) 
 - Removing readonly properties from for snapdump in storcli.(SCGCQ01669986 port of SCGCQ01669570) 
 - Different RetCode for N/A Drives - Parallel Drive Update(SCGCQ01682236 port of SCGCQ01681478) 
 - Storcli: VD creation fails from storcli in presence of 0KB bad drive .(SCGCQ01713567 port of SCGCQ01713240) 
 - Flashing PD's with parallel option wrong status is given by Storcli(SCGCQ01714667 port of SCGCQ01713734) 
 - Missing punctuation in Perccli delete config message(SCGCQ01714668 port of SCGCQ01698226) 
 - When a bad PD is flashed it fails as expected but error code is wrong(SCGCQ01714670 port of SCGCQ01713728) 
 - Parallel drive fw update on 1st drive fails, while drive fW update on another drive is in progress(SCGCQ01714671 port of SCGCQ01676426) 
 - Enclosure show status command gives success but nothing is shown(SCGCQ01731381 port of SCGCQ01731280) 
 - storclio need to support proprietary i2c controller mode.(SCGCQ01801679 port of SCGCQ01732990) 
 - Phase 7 - Drive Listing Is Not In Order for "/c0 show" & "/c0 show all"(SCGCQ01810054 port of SCGCQ01809355) 
 - EPD-PT behavior changes for Aero to support in RAID personality(SCGCQ01816139 port of SCGCQ01594176) 
 - perccli /cx delete config command getting incorrect error message.(SCGCQ01851908 port of SCGCQ01850719) 
 - State of the tape drive should be displayed as "JBOD" when FW state is MR_PD_STATE_SYSTEM(SCGCQ01853457 port of SCGCQ01853444) 
 - StorCLI hits segmentation fault on a Superdome Flex Server (with 16 MR cards in server(SCGCQ01911830 port of SCGCQ01886637) 
 - (Libmods) Isolating faulty cable issue from bad drive issue for Aspen and Vail (Invader and Intruder)(SCGCQ01915314 port of SCGCQ01227144) 
 - Isolating faulty cable issue from bad drive issue for Aspen and Vail (Invader and Intruder(SCGCQ01915320 port of SCGCQ01222855) 
 - Updating ncurses library from 6.0 to 6.1(SCGCQ01915841 port of SCGCQ01836749) 
 - Disk performance throttled when running MegaCli AdpEvent log dump on Aspen and Vail (Invader and Intruder(SCGCQ01921533 port of SCGCQ01220901) 
 - Libmod changes: Adding CLI command to display/toggle new controller property.(SCGCQ01106982(SCGCQ01922038 port of SCGCQ01106988) 
 - LibMods : Adding the function that changing flag of full initialize completion(SCGCQ01922843 port of SCGCQ01141462) 
 - MFI Frame alignment(SCGCQ01922846 port of SCGCQ01064480) 
 - Square bracket is missing in the syntax of "set hardware device page" in storclio.(SCGCQ01929787 port of SCGCQ01224857) 
 - Ventura IT show command displays all the PD's under Drive group-0 which is wrong(SCGCQ01526330 port of SCGCQ01274709) 
 - Change in RAID levels displaying in controller show all command(SCGCQ01540785 port of SCGCQ01509578) 
 - Ctrl-H hang during foreign import along with app tab toggling.(SCGCQ01571937 port of SCGCQ01356240) 
 - Data Abort Exception while entering CTRL R(SCGCQ01571939 port of SCGCQ01380831) 
 - Storcli_Aero: Storcli not able to detect controller at EFI shell without Avago MR driver.(SCGCQ01599436 port of SCGCQ01595698) 
 - This feature is not supported on this Controller" is displayed multiple times.(SCGCQ01599461 port of SCGCQ01595717) 
 - Unified StorCLI 7.6 : Creation of VD aborts StorCLI when FW returns error code for MR_DCMD_CFG_READ DCMD(SCGCQ01600150 port of SCGCQ01588245) 
 - Snapdump file user does not know the compression method(SCGCQ01624670 port of SCGCQ01616917) 
 - Storcli_Aero: unable to set sasadd methodport on IT controller.(SCGCQ01628097 port of SCGCQ01609234) 
 - Patrol read state shown as aborted while it actually is paused.(SCGCQ01714666 port of SCGCQ01714264) 
 - Storcli output does not list missing PD's(SCGCQ01715372 port of SCGCQ01715114) 
 - Grammatical mistakes in Perccli Un-supported RAID level warning message.(SCGCQ01720760 port of SCGCQ01714033) 
 - Unified StorCLI Phase 8 : NVMe and SAS Drive's WWN is incorrect for IT Controller(SCGCQ01749927 port of SCGCQ01749795) 
 - storcli /cx/pall show command fails with older generation cards that does not support PCIe pages(SCGCQ01758163 port of SCGCQ01520816) 
 - PERC10.2:CLI:Help: Grammatical Error in Text String "/ex - specifies a enclosure where X is the enclosure device ID."(SCGCQ01768428 port of SCGCQ01764888) 
 - "storcli show snapdump" output is incorrect(SCGCQ01817308 port of SCGCQ01817307) 
 - StorCLI should support firmware flash for SAS3 IR Controllers(SCGCQ01873578 port of SCGCQ01835627) 
 - show enclosure command is not exiting to shell(SCGCQ01874899 port of SCGCQ01814011) 
 - Storcli issuing 'add jbod drives=all' causes storcli to crash(SCGCQ01893370 port of SCGCQ01892288) 
 - Hide/Unhide command output display incorrect VD no for VDs on which the operation is not supported(SCGCQ01911848 port of SCGCQ01837932) 
 - Turn on the boodrive by storcli, HII does not reflect it, still shows "Off"(SCGCQ01915791 port of SCGCQ01816927) 
 - Porting StorCLI Huawei Criteo requirement from 7.4 to 7.5(SCGCQ01917007 port of SCGCQ01761309) 
 - PH9 PA StorCLI - /c0/eall/sal show all gives success message when no drives connected(SCGCQ01917168 port of SCGCQ01855721) 
 - Storcli: Ventura B0: BIOS Flashing Failure Observed in EFI Storcli and Multiple Tries Causes UART Unresponsive(SCGCQ01917338 port of SCGCQ01829667) 
 - Adding CLI command to display/toggle new controller property.(SCGCQ01922836 port of SCGCQ01106982) 
 - Storcli not working on large config setup when some of the drives are missing or the system has foreign config.(SCGCQ01940851 port of SCGCQ01940805) 
 - Expander FW download using storecli utility crashs.(SCGCQ01979615 port of SCGCQ01979599) 
 - Updating readme file(SCGCQ01294583 port of SCGCQ01294570) 
 - Remove sorting logic for array physical drives(SCGCQ01445612 port of SCGCQ01444666) 
 - Add /dev/sdX to StorCLI output(SCGCQ01514530 port of SCGCQ01505055) 
 - Allow "noreset" option for IT controllers during firmware download(SCGCQ01517643 port of SCGCQ01514483) 
 - Libmod: checking-in the changes forLibmods for SCGCQ01525764(SCGCQ01528935 port of SCGCQ01528886) 
 - Libmod: checking-in the changes forLibmods for SCGCQ01525764(SCGCQ01528936 port of SCGCQ01528886) 
 - Implemented to display the full Model number of the SATA drive when connected to an IT controller.(SCGCQ01528939 port of SCGCQ01525764) 
 - Unified StorCLI 7.6 : Read SBR fails with pre-ventura controllers(SCGCQ01539390 port of SCGCQ01539360) 
 - Removal of MegaCLI syntax from StorCLI(SCGCQ01591157 port of SCGCQ01504604) 
 - Unified LibMod changes for ER : SCGCQ01504604 - Removal of MegaCLI syntax from StorCLI(SCGCQ01591158 port of SCGCQ01504610) 
 - Spell error in /call/dall split mirror output.(SCGCQ01599464 port of SCGCQ01595709) 
 - storcli controller show all lists EPD's in VD list(SCGCQ01599486 port of SCGCQ01556595) 
 - Detailed status is not displayed on locating a drive which is not connected to IT card.(SCGCQ01599519 port of SCGCQ01571154) 
 - Storcli returns error for show file commands when parsing MR images eventhough the command was successful(SCGCQ01600149 port of SCGCQ01529009) 
 - Storcli_Aero: Storcli not able to detect controller at EFI shell without Avago MR driver.(SCGCQ01600151 port of SCGCQ01595698) 
 - Support only Dell SAS IT Controllers with PERCCLI(SCGCQ01618493 port of SCGCQ01547929) 
 - Cutlass Phase 16 Storcli: Partner device ID should be suppressed under ./storcli /c0/eall show for multipath connections(SCGCQ01625114 port of SCGCQ01606780) 
 - Cached IO policy(SCGCQ01627941 port of SCGCQ01607434) 
 - Space need in the output for secure erase(SCGCQ01714669 port of SCGCQ01713604) 
 - Unified StorCLI 7.7 : Unconfigured BAD drives are not displayed in /c0 show output(SCGCQ01718294 port of SCGCQ01718269) 
 - Unified StorCLI 7.7 : StorCLI doesn't report failure status when nopad image flashing fails via completeflash command in MR(SCGCQ01749921 port of SCGCQ01749849) 
 - storcli did not show current profile when connection in invalid config.(SCGCQ01760598 port of SCGCQ01713676) 
 - non-RAID:HII:CLI:Dedicated Hot Spare creation displays incorrect disk group association.(SCGCQ01760604 port of SCGCQ01698272) 
 - Storcli does not display the complete enclosure serial number(SCGCQ01760655 port of SCGCQ01735493) 
 - "storcli show snapdump" output is incorrect(SCGCQ01817270 port of SCGCQ01804779) 
 - Fails to set user defined value for delayOCR field in the SnampDump(SCGCQ01817941 port of SCGCQ01817465) 
 - Fails to set SnapDump savecount.(SCGCQ01817942 port of SCGCQ01817177) 
 - displaying ONFI flash state command: storcli /cx/cv show all New Feild: "NVCache state"(SCGCQ01836905 port of SCGCQ01681538) 
 - Error message when Maximum number of VDs are reached(SCGCQ01911765 port of SCGCQ01856544) 
 - perccli /cx delete config command getting incorrect error message.(SCGCQ01911827 port of SCGCQ01850719) 
 - Unified LibMod changes : Add security-related compilation and linker flags to StorCLI - Linux(SCGCQ01913460 port of SCGCQ01893074) 
 - Add security-related compilation and linker flags to StorCLI - Linux(SCGCQ01913461 port of SCGCQ01892560) 
 - Add interface in storecli that could get relearn complete status(SCGCQ01914835 port of SCGCQ01848387) 
 - 6.13_SDS : Wrong error message is displayed on trying to create R0 vd on an pre configured drive as EPD.(SCGCQ01922844 port of SCGCQ01196785) 
 - Added new commands from StorCLI(SCGCQ01922845 port of SCGCQ01134166) 
 - Unified StorCLI : Enclosure devices are part of drive list used for drive operations(SCGCQ01979534 port of SCGCQ01979483) 
 - Add /dev/sdX to StorCLI output(SCGCQ01514531 port of SCGCQ01514516) 
 - Prepare To Transport(SCGCQ01568934 port of SCGCQ00936041) 
 - CacheCade VD association returns error in Config Utility (Ctrl-R(SCGCQ01571889 port of SCGCQ01264552) 
 - .(SCGCQ01571935 port of SCGCQ01325052) 
 - Commands "/call/all" return inappropriate message or segfault when both MR and IT controllers are connected(SCGCQ01599483 port of SCGCQ01561703) 
 - Un-supported command displayed for "storcli64.exe /call show sasaddress"(SCGCQ01620412 port of SCGCQ01619562) 
 - Update help contents for jbod delete(SCGCQ01625945 port of SCGCQ01624605) 
 - Storcli_Aero: unable to set sasadd methodport on IT controller.(SCGCQ01628094 port of SCGCQ01609234) 
 - Libmod Changes for Defect SCGCQ01595640 (CLI does not report Serial number for Lenovo D1224 Enclosure(SCGCQ01714307 port of SCGCQ01664412) 
 - Drive Listing Is Not In Order for "/c0 show" & "/c0/eall/sall show"(SCGCQ017329