===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
Firmware Version: 212.0.4.3
This package updates the Broadcom Firmware Code to the levels shown under the
"Version" column for the products listed below :
ThinkSystem Adapters / LOMs ASIC
---------------------------------------- -----
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482) 5720
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484) 5719
System x Adapters / LOMs ASIC
---------------------------------------- -----
System x3650 M5 / x3550 M5 / x3500 M5 5719
NeXtScale nx360 M5 5717_C0
Broadcom NetXtreme I Dual Port GbE Adapter (90Y9370) 5720
Flex System EN2024 4-port 1Gb Ethernet Adapter (49Y7900) 5718
Broadcom NetXtreme I Quad Port GbE Adapter (90Y9352) 5719
===============================================================================
Change History
===============================================================================
Firmware Version: 212.0.4.3
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
Problems Fixed:
- Updated firmware update utility to:
- Support SLES15
- Disable check for Fcode allowing removal if needed.
- Enable logging for command line mode.
- Updated UEFI UNDI driver to:
- Fix the individual port enable/disable setting that is visible for
BCM5719 LOMs/NICS in F1 setup. Settings changes were not being saved
in ThinkSystem machines
- Add the adapter port MAC address to the listing in F1 setup Network menu
Enhancements:
- Combined firmware package for both ThinkSystem and System x products
===============================================================================
===============================================================================
Firmware Version: 20.6.4.3a
---------------------------
Boot Code
ASIC Version
---- -------
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.6.13
PXE Code 20.6.1
ISCSI Code 20.6.2
Problems Fixed:
Enhancements:
- Initial release supporting only these ThinkSystem adapters:
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484)
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482)
===============================================================================
===============================================================================
Firmware Version: 17.4.4.8-c
----------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Corrected an issue where the Permanent MAC Address reported via IMM may
be incorrect or duplicated
- Bogus "SMASH" entry may appear in F1 setup firmware menu after LOM
update.
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.4.7a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.8
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Fixed issue with tx/rx flow control in shared nic mode where connection
to IMM is lost for a period of time after the server is powered off.
- Fixed issue with mac address filtering in shared nic mode where
connection to IMM is lost after a system reboot.
Enhancements:
- Added individual port enable/disable functionality in F1 Setup and
ASU/OneCLI for the following:
Adapters: NetXtreme I Quad Port GbE Adapter
Systems (LOMs): x3650 M5, x3550 M5, x3500 M5
===============================================================================
===============================================================================
Firmware Version: 17.4.4.2a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- Updated the firmware update tool, a bug was found where it would not
attempt to update package version 15.x.x code.
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.3.3a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- ASU or XClarity is not able to restore default ISCSi settings
(such as 0.0.0.0) for adapters 90Y9352 and 90Y9370
- Invalid ISCSI parameters detected with ASU or XClarity on adapter
49Y7900.
- Flex x220 does not provide correct UUID to BOFM.
- Updated permanent MAC address retrieval logic when reporting the
value to AIM.
- Update permanent MAC address retrieval logic when reporting value to
additional AIM fields.
- Updated driver to modify attribute pattern strings for OEM devices.
- Removed extraneous HII page which was causing OEM parameter
extraction utility to show improper configuration.
- Update permanent MAC address retrieval logic when reporting value to
AIM.
Enhancements:
Lenovo Data Center Group Linux OS Support Home Page