Lenovo YUM Repository
Release and Change History
Lenovo YUM Repository
Release and Change History
| Bundle Release Information: |
| Targeted Server Family (Machine Type): System x3550 M5 (5463) |
| Targeted Operating System: SLES15SP0 |
| YUM Repository Build Date: 2019_04_23 |
| Device: |
| Qlogic 16Gb FC Single-port HBA for IBM System x |
 Device Product Guide |
Part Number: 00Y3337 Feature Code: ATZC |
|||
|---|---|---|---|---|---|
| PCIe Sub Vendor ID: 0x1077 PCIe Sub Device ID: 0x0264 |
| Release History: |
| Change History Documents |
| Firmware | Firmware Name | Version | |
|---|---|---|---|
| QLogic 16Gb Fibre Channel Adapter MultiFlash Update for System x for 00Y3337-00Y3344 | 266x-4.74.13.d | ||
| Drivers | Driver Name | Discreate Package Download | Version |
| qlgc-qla2xxx-kmp-default enablement code |
qlgc-qla2xxx-kmp-default-8.08.00.08.15.0_k_ k4.12.14_23-1.sles15sp0.x86_64.rpm | 8.08.00.08.15.0_k_k4.12.14_23 | |
| Firmware | Firmware Name | Version | |
|---|---|---|---|
| QLogic 16Gb Fibre Channel Adapter MultiFlash Update for System x for 00Y3337-00Y3344 | 266x-4.74.13.d | ||
| Drivers | Driver Name | Discreate Package Download | Version |
| qlgc-qla2xxx-kmp-default enablement code |
qlgc-qla2xxx-kmp-default-8.08.00.08.15.0_k_ k4.12.14_23-1.sles15sp0.x86_64.rpm | 8.08.00.08.15.0_k_k4.12.14_23 | |
| Release 19A Change History Documents |
QLogic 16 Gb Fibre Channel Adapter MultiFlash Update for System x
QLogic Corporation.
All rights reserved.
Version 4.74.13
08/21/2018
* Flash Image Version 4.74.13
HLD47412.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.43
uEFI version 6.24 signed
* FC Firmware - v8.08.05
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
Change History
************************************************************************************
Version 4.74.11
04/13/2018
* Flash Image Version 4.74.11
HLD47411.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.43
uEFI version 6.24 signed
* FC Firmware - v8.07.12
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
************************************************************************************
Version 4.74.10
08/08/2017
* Flash Image Version 4.74.10
HLD47410.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.43
uEFI version 6.24 signed
* FC Firmware - v8.05.63
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
************************************************************************************
Version 4.74.09
07/11/2017
* Flash Image Version 4.74.09
HLD47409.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.43
uEFI version 6.24 signed
* FC Firmware - v8.05.61
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
*************************************************************************************
Version 4.74.07
06/06/2017
* Flash Image Version 4.74.07
HLD47407.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.43
uEFI version 6.24 signed
* FC Firmware - v8.05.47
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
BIOS Version
Version 3.43
* Fixed bug that caused FlexAddress to fail on Hilda adapters (ER139777).
Version 3.42
* Added delay before issuing zone command to get FA-BLUN (ER139690).
Version 3.41
* Added code to to allow direct connected LUN to be configured when FA_BLUN is enabled.
Version 3.40
* Removed Beta Banner
Version 3.40 Beta 3
* Added code to check for Embedded HBA flag in FBC to determine setting of Training Enable bit.
Version 3.40 Beta 2
* Changed code to check for selectable boot when FA_BLUN not found.
Version 3.40 Beta 1
* Added support for configuring FEC and BB_CR.
* Fixed issue in check_mem64 routine where pci address was not setup correctly.
UEFI Driver:
6.24
* Fixed formatting problems in the HII WWN Database menu. The
formatting problems only exist on older System X servers.
(ER140666)
* Built driver with x64 compiler. (ER140666)
* Microsoft signed driver.
*************************************************************************************
Version 4.74.03
01/17/2017
* Flash Image Version 4.74.03
HLD47403.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.39
uEFI version 6.23 (signed)
* FC Firmware - v8.03.00
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
Version 3.39
* Fixed issue with 64bit addressing when BIOS enabled (ER138735).
Version 3.38
* Removed Beta Banner
Version 3.38 Beta 1
* Added code for load separate BIOS image for QLE27xx and QLE269x.(ER138517)
* Disabled CTRL-C option for BIOS setup utility (ER139677)
Version 3.37
* Added code to restore Virtual WWPN after cold boot for Baker based HBA's (ER138315).
Version 3.36
* Fixed bug created in BIOS 3.35 that caused BFS to fail (ER138533,ER138536).
Version 3.35
* Removed code that was preventing alternate FW from loading (ER138425).
Version 3.34
* Fixed issue with Show CLP Hilda FC pointer. (ER138211)
Version 3.33
* Fixed CTRL-Q utility datarate menu for Hilda HBA. (ER138168)
Version 3.32
* Removed Beta Banner
Version 3.32 Beta 2
* Fixed bug in setting pointer for secondary FW (ER137883).
Version 3.32 Beta 1
* Added support for QLipper
Version 3.31
* Removed Beta Banner
Version 3.31 Beta 2
* Added back Spin-up delay.(FOR DEBUG USE ONLY) (ER136488)
* Fixed issue with OCSD (ER136720)
Version 3.31 Beta 1
* Fixed bug in setting pointer for NVRAM access. This
* bug was created in version 3.30.
Version 3.30
* Removed Beta Banner
Version 3.30 Beta 1
* Added code to check for CTRl-Q disabled(ER135448).
* Added code to allow 4G data rate for 26xx(ER135693).
* Added check for which copy of FW to use(Baker only).
* Fixed issue with supporting 64bit Bar(ER136098).
*************************************************************************************
Version 4.74.02
12/01/2015
* Flash Image Version 4.74.02
HLD47402.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.29
uEFI version 6.23 (signed)
* FC Firmware - v8.03.00
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* QLflash version 4.1.0.5
BIOS Version 3.29
* Fixed issue causing MD2 CLP to fail (ER135507).
Version 3.29 Beta 2
* Added code to fix CLP issue with 13G Dell system
Version 3.29 Beta 1
* Fixed bug in displaying Execution Throttle in CTRL-Q utility correctly for 4/8G HBA.
Version 3.28
* Removed Beta Banner
Version 3.28 Beta 2
* Added coded to load/start FW for OCBB/OCSD only when BIOS is disabled
Version 3.28 Beta 1
* Added support of Baker HBA
Version 3.27
* Added code to not configure any targets when FA Boot
* LUN enabled but FA BOOT LUN not found. ER133769.
* Added code to allow FA Boot LUN when FA WWPN enabled
* Added options in CTRL-Q utility to enable FA WWPN
* and FA BOOT LUN.
UEFI Driver: 6.23
* Updated HII to support System X and AMI based servers. (ER137721)
* Changed HII WWN Database behavior. The WWPN/LUN list is now
created when the driver starts. This allows driver to run on AMI
based servers. (ER137721)
* Updated a few HII strings. (ER137721)
* Fixed bug in UCM support. Callback flag now used to determine browser
mode or UCM mode. (ER137721)
* UCM WWN field is now a string. UCM did not properly support UINT64.
(ER137721)
*************************************************************************************
Version 4.72.12
09/22/2015
* Flash Image Version 4.72.12
HLD47212.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.29
uEFI version 6.22 signed
* FC Firmware - v7.05.04
* Pegtune - v5.110.23
* CRBnit - v5.14.15
* Removed Adapter Personality field from Agentless page. (ER136194)
* Microsoft signed driver.
*************************************************************************************
Version 4.70.07
03/26/2015
* Flash Image Version 4.70.07
HLD47007.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.29
uEFI version 6.21 Signed
* FC Firmware - v7.05.04
* Pegtune - v5.110.10
* CRBnit - v5.14.15
* Fixed issue causing MD2 CLP to fail (ER135507).
* Added code to fix CLP issue with 13G Dell system
* Fixed issue in displaying Execution Throttle in CTRL-Q utility correctly for 4/8G HBA.
* Added coded to load/start FW for OCBB/OCSD only when BIOS is disabled
* Added support of Baker HBA
* Added code to not configure any targets when FA Boot
* LUN enabled but FA BOOT LUN not found. ER133769.
* Added code to allow FA Boot LUN when FA WWPN enabled
* Added options in CTRL-Q utility to enable FA WWPN
and FA BOOT LUN.
* Fix minor cosmetic error in display of Fcode/EFI
versions for show port CLP.(ER133294)
* Added support FA BOOT LUN
* Added 8G support for show port clp
* Changed VLAN ID max value from 4095 to 4094.
* Removed spinup option from CTRL-Q.
* Changed CTRL-Q to allow max value for Login Retry,
* Port Down Retry, Link Down Count of 65535.ER(116099)
* Removed Helga support
* Added support for show port clp.
* Remove EV boot order option from OEM BIOS.
* Added CTRl_Q option to set VLAN_ID for FCoE HBA's(ER110593).
* Changed Banner to display 'FCoE' for Schultz (ER110784).
* Added additional time to login target when called
after EFI driver unloads. (ER110755,ER110855)
* Added code to handle boot LUN Greater Than 255 (ER109195).
* Added support for Helga.
* Added code to display message when 64 bit address is detected.
* Added support for Execution Throttle for P3P (ER106372)
* Added code to not display connection options for Hilda Trinity adapter.
* Checked for invalid LUN in CTRL-Q scan devices.
* Removed port number from HII formset title. This fixes a UCM parsing
issue. (ER134560).
*************************************************************************************
Version 3.20.09.a
12/11/2014
* Flash Image Version 3.20.09
HLD32009.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.24
uEFI version 6.20
* FC Firmware - v7.02.00
* QLflash version 4.1.0.5
These changes describe the changes, fixes, known issues, and
release details that apply to the FC-FCoE BIOS version 3.24.
Version 3.24
* Added code to display message when 64 bit address is detected.
* Added support for Execution Throttle for P3P (ER106372)
* Added code to not display connection options for Hilda Trinity adapter.
* Checked for invalid LUN in CTRL-Q scan devices.
* Fixed bug in CTRL_Q utility that could cause some cosmetic display issues.
* Added Hilda CLP _hss support.
* Configured ISP24xx if on slot 0.
* Added "QLogic" to PnP productid (ER104424)
* Checked for 4G flag in NVRAM for Hilda FC.(ER104714)
*************************************************************************************
Version 3.20.06
06/25/2014
HLD32006.BIN contains:
----------------------
* FC Bootcode (2600 Series only)
BIOS 3.0 version 3.24
uEFI version 6.17
* FC Firmware - v7.02.00
* Changed Banner to display 'FCoE' for Schultz (ER110790).
* Updated to get PN & Card SKU dynamically from I2C VPD for AIM (ER116141)
* Updated to get PN & Card SKU dynamically from I2C VPD for AIM (ER116141)
* Updated MTU size and AIM version references as per revised requirement. (ER113361)
* Updated AIM config strings as per revised requirements. (ER113361)
* Updated AIM support as per revised requirements (ER113361)
* Added fix for boot settings persistency issue in BOFM supported legacy BIOS (ER112641)
* Added support for Lenovo AIM [ER113361]
* Added fix to persist user changes made on static forms [ER112639]
* Added feature to dynamically list targets in HII [ER105725]
*************************************************************************************
Version 3.20.03
Date: 10/01/2013
BIOS 3.0 version 3.24
uEFI version 6.10
FC Firmware - v7.01.00
* Added additional time to login target when called
* after EFI driver unloads. (ER110755.ER110855)
* Added code to display message when 64 bit address detected.
* Added support for Execution Throttle for P3P (ER106372)
* Check for invalid LUN in CTRL-Q scan devices.
* Fixed bug in CTRL_Q utility that could cause some cosmetic display issues.
* Configure ISP24xx if on slot 0.
* Added "QLogic" to PnP productid (ER104424)
* Fixed bug with CTRL-Q Loopback Utility (ER100729).
* Added code to check/program Feature Config checksum.
* Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command (ER100294).
* Added check for PCI address change when updating option card data structure.
* Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
* Added code to check/program Feature Config checksum.
* Fixed cosmetic issue in displaying data rate in CTRL-Q
* Fixed display issue with CTRL-Q Diskutility(ER98727)
* Fixed Lun select issue with CTRL-Q (ER98675).
* Fixed bug in displaying selectable boot lun (ER98226)
* Removed 4G data rate option for OEM adapter (ER98228)
* Limit leading '0's in CTRL-Q menu (ER98389).
* Set 'Aggressive Cooling' flag for OCSD.
* Enabled Personality Change option.
* Fixed issue with not restoring defaults on port 1 (ER 97619)
* Fixed issue with serdes data saved incorrectly. (ER 97654)
* Added code to limit Report Lun List size to 256 luns
* Added check for 0 lun count when selecting device (ER 97385)
* Disable Personality Change option in CTRL-Q.
* Fixed bug with WWNN handling for MCTP.(ER 96920)
* Added check for Set MD2 set to 0 (restore defaults) (ER96912)
* Added code to reset Port Config after Internal
loopback test(FCoE).
* Added support for 16 bit lun (er96090).
* Add support for Set MD2 CLP string.
* Added code to issue Load Flash FW (3) MB command as part ISP
start sequence. (ER 94035).
* Fixed code to prevent async event from causing BIOS
to hang when scanning for devices (er94371).
* Fix code to disable ALT+1 Hotkey (er92844) .
* Fixed CTRL-Q code mailbox timeout (er92957).
* Added warning message in Personality change screen.
* Updated BIOS to version 3.12 of non-hilda BIOS
* Removed check for Virtual Address on Cold Boot.
* Changed code to check for signature aaaaaaaah before
updating virtual mac address.
* Changed code to ignore soft boot signature aaaaaaaah
* Added code to save device number in OCSD.
* Added code to read cold boot register signature to
determine when BIOS should update/restore virtual
Mac address.
* Fixed bug where retry count was not always being updated.
* Added code to support ECHO lopback command.
* Added support NCSI Flex Address.
*************************************************************************************
Version 3.20.00
Date: 8/30/2013
BIOS 3.0 version 3.22
uEFI version 5.27
FC Firmware - v7.00.01
- Added code to display message when 64 bit address detected.
- Added support for Execution Throttle for P3P (ER106372)
- Added code to not display connection options for Hilda Trinity adapter.
- Check for invalid LUN in CTRL-Q scan devices.
- Fixed bug in CTRL_Q utility that could cause some cosmetic display issues.
- Add Hilda CLP _hss support.
- Configure ISP24xx if on slot 0.
- Added "QLogic" to PnP productid (ER104424)
- Check for 4G flag in NVRAM for Hilda FC.(ER104714)
- Fixed bug with CTRL-Q Loopback Utility (ER100729).
- Added code to check/program Feature Config checksum.
- Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command (ER100294).
*************************************************************************************
Version 2.01.55
Date: 1/16/2013
BIOS 3.0 version 3.16
uEFI version 5.27
FC Firmware - v6.03.00
-Fix an issue where the first 4 bytes of the BootTargetWWN are set to FF
*************************************************************************************
Version: 2.01.26
Date: Initial Release
BIOS 3.0 version 3.16
uEFI version 5.26
FC Firmware - v6.03.00
Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2019 Lenovo. All rights reserved |
======================================================= Change History for Qlogic Converged Network Adapter FC Driver ======================================================= Document Name: Change History Document Status: Lenovo General Availability Document Version: qla2xxx-8.08.00.08.a Latest Package Version: qla2xxx-8.08.00.08.a Latest Driver Version: 8.08.00.08.15.0-k Document Updated: 07-Aug-2018 Product: Qlogic FC Linux Device Driver ======================================================= Please visit www.qlogic.com/hba for full documentation, additional drivers, and management applications. Version qla2xxx-8.08.00.08.a - Initial support for SLES15
Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2019 Lenovo. All rights reserved |