ThinkSystem Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter	Device Product Guide	Part Number: 7ZT7A00505 Feature Code: AUKQ
PCIe Sub Vendor ID: 0x17AA PCIe Sub Device ID: 0x4120

Firmware	Firmware Name	Version
Broadcom NX-E Ethernet Firmware Update for Linux	nxe-214.0.188.0
Drivers	Driver Name	Discreate Package Download	Version
bnxt_en kernel driver	kmod-bnxt_en-1.9.2- 214.0.182.0.rhel6u10.x86_64.rpm	1.9.2
libbnxtre enablement code	libbnxtre-214.0.181.0- rhel6u10.x86_64.rpm	214.0.181.0

Firmware	Firmware Name	Version
Broadcom NX-E Ethernet Firmware Update for Linux	nxe-214.0.188.0
Broadcom NX-E Ethernet Firmware Update for Linux	nxe-212.0.168.0
Drivers	Driver Name	Discreate Package Download	Version
bnxt_en kernel driver	kmod-bnxt_en-1.9.2- 214.0.182.0.rhel6u10.x86_64.rpm	1.9.2
libbnxtre enablement code	libbnxtre-214.0.181.0- rhel6u10.x86_64.rpm	214.0.181.0
bnxt_en kernel driver	kmod-bnxt_en-1.9.1- 212.0.162.0.rhel6u10.x86_64.rpm	1.9.1
libbnxtre enablement code	libbnxtre-212.0.159.0- rhel6u10.x86_64.rpm	212.0.159.0

Broadcom NX-E Ethernet Firmware Update for Linux

===============================================================================
                     Broadcom Netxtreme Firmware Package
===============================================================================

Firmware Version: 214.0.188.0

This package updates the Broadcom Firmware Code to the levels shown for the 
devices listed below :

ThinkSystem Adapters / LOMs                                             ASIC
----------------------------------------                                -----
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter  (7ZT7A00497)     57416
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496)     57416
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter  (7ZT7A00505)     57412


===============================================================================
Change History
===============================================================================

Firmware Version:    214.0.188.0
-----------------------------------
   Boot Code         214.0.186.0
   MBA Code          214.0.181.0
   UEFI Code         214.0.188.0
   iSCSI Boot        214.0.151.0
   NCSI Code         214.0.180.0
   RDMA FW           214.0.182.0
   
   Problems Fixed:

       - None
   
   Enhancements:

       - Added support for new drivers and machine types 

===============================================================================
===============================================================================

Firmware Version:    212.0.168.0
-----------------------------------
   Boot Code         212.0.162.0
   MBA Code          212.0.168.0
   UEFI Code         212.0.162.0
   iSCSI Boot        212.0.12.0
   NCSI Code         212.0.117.0
   RDMA FW           212.0.121.0
   
   Problems Fixed:

       - Fixed a condition where legacy PXE might not work when a VLAN is set
       - Fixed a condition where after enabling NPAR and saving settings, on 
         the next boot NPAR is not enabled on all ports
       - Fixed an issue with 7ZT7A00496 and 7ZT7A00505 where ports may disappear 
         from the F1 setup -> System Settings -> Network menu, across reboots
       - Fixed a possible hang condition while downloading a kernel image after 
         loading a legacy iPXE bootloader
       - Fixed an erroneous link speed LED display after warm reboot on 
         10GBASE-T adapters
       - Removed a few un-needed MBA options from F1 setup menu. Legacy 
         settings are configured via F1 setup, there is no legacy ROM menu
       - Fixed an issue where 7ZT7A00505 shows 8 logical ports in the OS instead
         of 16 when NPAR is enabled. Note the system can also affect the number 
         of ports displayed
       - Restored the default setting for both Operational Link Speed and 
         Firmware Link Speed for 7ZT7A00505 to AutoNeg. A prior level mistakenly
         set the default to 25Gbs 
       - There is an error when edit info on deploy pattern with  
         Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter
       - Fixed the Virtual MAC address setting for each NPAR partition,
         the OneCli path to the setting was not unique
   
   Enhancements:

===============================================================================
===============================================================================
 
Firmware Version:    212.0.112.0
-----------------------------------
   Boot Code         212.0.107.0
   MBA Code          212.0.92.0 
   UEFI Code         212.0.112.0
   iSCSI Boot        212.0.12.0 
   NCSI Code         212.0.109.0
   RDMA FW           212.0.106.0
   
   Problems Fixed:
       - Fixed messages such as 'CQ (tx) cid 0017' output to serial 
         during legacy PXE boot
       - Fixed possible hang condition during POST with densly populated 
         systems, when the UEFI driver loads for an adapter that has not 
         been assigned PCI resources
       - Fixed several configuration settings that appear to have no default 
         value when queried by tools such as OneCli            
       - Fixed XCC inventory display for single-port adapter to show 16 logical
         ports (instead of 8) when 'Multi-Function Mode' is set to 'NPAR 1.0'
       - Fixed F1 setup setting 'Number of VFs Per PF' unable to be set via 
         OneCli / LXCA when 'Multi-Function Mode' is set to 'SF' and 'SRIOV' is
         set to 'Enabled' in 'Device Configuration Menu'
   
   Enhancements:
 
===============================================================================
===============================================================================
 
Firmware Version:    20.06.04.07
--------------------------------
   Boot Code         20.6.135
   MBA Code          20.6.104
   UEFI Code         20.6.123
   iSCSI Boot        20.6.2
   NCSI Code         1.5.59.0
   RDMA FW           20.6.108.0
   
   Problems Fixed:
       - Fixed a legacy mode option ROM conflict with Intel RST RAID,
         which could cause a system hang when attempting legacy boot
       - Fixed XCC inventory display of maximum speed 10GB for 25GB adapter
       - Added better messaging for when an invalid IP address is entered in 
         F1 setup 'iSCSI Initiator Parameters' menu
       - Changed the F1 setup setting 'Number of VFs Per PF' to be read-only 
         when 'Multi-Function Mode' is set to 'NPAR 1.0' in 
         'Device Configuration Menu'
   
   Enhancements:

===============================================================================
===============================================================================
 
Firmware Version:    20.06.04.02
--------------------------------
   Boot Code         20.6.124.0
   MBA Code          20.6.100.0
   UEFI Code         20.6.113.0
   iSCSI Boot        20.6.2.0
   NCSI Code         1.5.55.0
   RDMA FW           20.6.106.0
       
       -Initial Release

Lenovo Data Center Group Linux OS Support Home Page

linux.lenovo.com

Broadcom NX-E Ethernet Advanced Device Driver Package for RHEL6

===============================================================================
                     Broadcom Netxtreme Device Driver for Linux
===============================================================================

Device Driver Version: 1.9.2-214.0.182.0
RDMA Driver Version: 214.0.182.0
RDMA User Space Library Version: 214.0.181.0

Problems Fixed:
 - (CTRL-32497)Fix crash during bnxt_re driver load on RH 7.6
 - (CTRL-32736)Broadcom NX-C PCIe 25Gb adapter driver version not update to new version under rhel7.5 with PSIRT
 
Incremental Interoperability:
 - None

Known Issues:
 - None

 ===============================================================================
Device Driver Version: 1.9.2-214.0.172.0
RDMA Driver Version: 214.0.157.0
RDMA User Space Library Version: 214.0.141.0    

Problems Fixed:
 - Packaging version changed

Incremental Interoperability:
 - None

Known Issues:
 - None 
===============================================================================

Device Driver Version: 1.9.2-214.0.150.0
RDMA Driver Version: 214.0.157.0
RDMA User Space Library Version: 214.0.141.0    

Problems Fixed:
 - NA (Initial drop for 19A)

Incremental Interoperability:
 - None

Known Issues:
 - None
===============================================================================
Device Driver Version: 1.9.1-212.0.162.0
RDMA Driver Version: 212.0.159.0
RDMA User Space Library Version: 212.0.159.0

Problems Fixed:
    - (CTRL-30950) Enhance Libbnxtre spec file to override inbox libbnnxtre if exists
    - (CTRL-28710) ethtool does not print cable information with command ethool -m  . Hwrm errors printed in dmes

Incremental Interoperability:
 - None

Known Issues:
 - None

================================================================================== 
Device Driver Version: 1.9.1-212.0.137.0

Problems Fixed:
    - (CTRL-29422) modprobe bnxt_en will show unregistered net_device Error (timeout: 499985)
          
Incremental Interoperability:
 - None

Known Issues:
 - None

============================================================================

Device Driver Version: 1.9.1-212.0.105.0

Problems Fixed:
    - Retpoline enabled compilation
       
   
Incremental Interoperability:
 - None

Known Issues:
 - None

Lenovo Data Center Group Linux OS Support Home Page

linux.lenovo.com