Lenovo YUM Repository
Release and Change History








Bundle Release Information:
Targeted Server Family (Machine Type): ThinkSystem ST558 (7Y15, 7Y16)
Targeted Operating System: SLES15SP0
YUM Repository Build Date: 2019_11_21

YUM Repository Release Version: Async

Device:
ThinkSystem 430-16i SAS/SATA 12Gb HBA

Device Product Guide

Part Number: 7Y37A01089
Feature Code: AUNL
PCIe Sub Vendor ID: 0x1D49
PCIe Sub Device ID: 0x0201


Release History:
Release: Async
Change History Documents
Firmware Firmware Name Version
BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA 430-09.02.00.07
BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA (For Linux) 430-3.03-06
Drivers Driver Name Discreate Package Download Version
lsi-mpt3sas-kmp-default
  enablement code
lsi-mpt3sas-kmp-default- 28.00.03.00_sles15-1.x86_64.rpm 28.00.03.00_k4.12.14_23
Utilities Utility Name Version
LSI Storage Authority Software for windows and linux 005.047.000.000
StorCLI command line tool for anyos storcli-007.0816.0000.0000

Release: 19A-1
Firmware Firmware Name Version
BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA 430-08.01.05.00-1
Drivers Driver Name Discreate Package Download Version
lsi-mpt3sas-kmp-default
  enablement code
lsi-mpt3sas-kmp-default- 27.125.01.00_sles15-1.x86_64.rpm 27.125.01.00_k4.12.14_23
Utilities Utility Name Version
LSI Storage Authority Software for windows and linux 004.189.000.000
StorCLI command line tool for anyos storcli-007.0713.0000.0000

Release: 19A
Firmware Firmware Name Version
BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA 430-08.01.05.00-1
BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA(06.02.00.01) 430-06.02.00.01
Drivers Driver Name Discreate Package Download Version
lsi-mpt3sas-kmp-default
  enablement code
lsi-mpt3sas-kmp-default- 27.125.01.00_sles15-1.x86_64.rpm 27.125.01.00_k4.12.14_23
lsi-mpt3sas-kmp-default
  enablement code
lsi-mpt3sas-kmp-default- 25.125.03.00_sles15-2.x86_64.rpm 25.125.03.00_k4.12.14_23
Utilities Utility Name Version
LSI Storage Authority Software for windows and linux 004.189.000.000
StorCLI command line tool for anyos storcli-007.0713.0000.0000


Release Async Change History Documents

BIOS and Firmware Update for ThinkSystem 430-x SAS/SATA 12Gb HBA



ThinkSystem 430-x SAS/SATA 12Gb HBA Firmware and BIOS Update

Supported Adapters:  
             ThinkSystem 430-8i SAS/SATA 12Gb HBA          NVdata version:09.00.00.39
		     ThinkSystem 430-16i SAS/SATA 12Gb HBA         NVdata Version:09.00.00.39
			 ThinkSystem 430-8i SAS/SATA 12Gb Dense HBA    NVdata version:09.00.00.20
		     ThinkSystem 430-8e SAS/SATA 12Gb HBA          NVdata version:09.00.00.35
		     ThinkSystem 430-16e SAS/SATA 12Gb HBA         NVdata version:09.00.00.35

NOTE TO SERVICE - Reference RETAIN #N/A




Version  09.02.00.07
---------------
    BIOS            Firmware      UEFI Driver   
 9.17.00.00      09.00.07.00     09.00.01.00

IT PH9
fix Bug 175956 - [ThinkAgileVX] 430-8i and 430-8i dense hba queue depth mismatch
defects:
 - Aero: CBB linker warns of overlapped sections(SCGCQ01856283) 
 - pl: backend PCIe: EC59 fault on switch attached resource allocation failure(SCGCQ01840007) 
 - SCons: Doxygen Builder fails to keep track of dependencies(SCGCQ01326891) 
 - pl: backend PCIe: ECD2 fault(SCGCQ01856306)
 - Correct via file generation(SCGCQ01390690) 
 - Ventura: OEM ID66 PCIe Switch backplane Slots Status Amber LEDs stay blinking(SCGCQ01687610) 
 - pl: NVMe: ECF0 fault(SCGCQ01790929) 
 - Interrupts not handled in fault state if a high priority interrupt handler faults(SCGCQ01802508) 
 - MCTP: 0x265D fault occurs when running high MCTP PCIe VDM load with MCTP Discovery commands(SCGCQ01790303) 
 - Ventura B0: 0x5842 fault while running IOs and error injection tests(SCGCQ01780777) 
 - Ventura: In mixed topology, attn LED is non-functional for SAS/SATA drives on OEM backplane(SCGCQ01930666) 
 - MCTP: MCTP over PCIe VDM Discovery can fail if Set EID and Port Enable collide(SCGCQ02029912) 
 - SPI_LIBRARY: Eliminate the need for "zip" exectuable for all but the "release" builds(SCGCQ01830243) 
 - ISTWIToolBox command returns garbage data(SCGCQ01818214) 
 - Set discovery status error when unaddressable device is found(SCGCQ01750119) 
 - I2C Back Plane detection fails(SCGCQ01850098) 
 - pl: NVMe: E40E fault on NVMe shutdown of uninitialized NVMe device(SCGCQ01840036) 
 - Ventura: FW may fault 265Dh when attached to TA-1005 UBM Enclosures(SCGCQ01836829) 
 - Ventura: The SPI_LIBRARY release directory referenced in the PL auto build script doesn't exist(SCGCQ01832795) 
 - pl: backend PCIe: debug code for SCGCQ01845211(SCGCQ01858455) 
 - Error if PERL_DIR environment variable is set(SCGCQ01506708) 
 - PL vSES: PCIe switch downstream virtual ports report SAS address of zero in SES page 0xA(SCGCQ01891238) 
 - Ventura: NVMe I2C Backplane Detection fails on HBA connectors C2/C3 resulting in Slots not responding to LED updates(SCGCQ01886810) 
 - Performance drop observed with expander attached topology in latest firmware.(SCGCQ02105245) 
 - pl: NVMe: Solid State Media log page is missing(SCGCQ01807305) 
 - (SATA Only(SCGCQ01784132) 
 - PL SATL: SANITIZE Command failing for SATA SMR drives with ZNR bit set(SCGCQ01800567) 
 - (SATA Only(SCGCQ01732835) 
 - pl: NVMe: unexpected switch attached task management timeouts(SCGCQ01763332) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted (part 2(SCGCQ01727593) 
 - PL needs to check if we have a path to the end device before issuing a device reset to an NVMe drive as a part of TM(SCGCQ01826234) 
 - Incorrect Element status reported in SES Page 2 by vSES when connected to an expander(SCGCQ01822333) 
 - pl: backend PCIe: debug info for port enable subsystem integration(SCGCQ01817645) 
 - Ventura: OEM PCIe dual switch attached backplane slot status LED stays Amber on partial slots(SCGCQ01788989) 
 - C++ version of SPI library being included in MR SCS Lib releases	(SCGCQ01853784) 
 - pl: backend PCIe: ECC7 fault(SCGCQ01771244) 
 - pl: backend PCIe: EC3D fault(SCGCQ01835042) 
 - Ventura/Aero: ALADIN_PAGE45_INIT_FLAGS_STRUCT has too many bits (should be 32(SCGCQ01830026) 
 - Ventura: 265Dh Fault observed while accessing SFF-TA-1005 UBM backplane device(SCGCQ01826919) 
 - Ventura MSS: Multi-bit ECC, EFI SAS DRIVER issue seen when performed multi reboot stress from UEFI(SCGCQ01794025) 
 - Aero/Ventura: Remote Flash (rmtf.rom(SCGCQ01384845) 
 - 0x7211 Fault hit with more than one Elrond Ux4 midplanes attached(SCGCQ01850593) 
 - pl: SAS/SATA devices not discovered with partial backplane configuration	(SCGCQ01870842) 
 - pl: Handle partial PCIe Link configs for SFF TA 1005 UBM support(SCGCQ01857152) 
 - Ventura MSS: VRef training failures on Marlin/Pocono boards.(SCGCQ01891340) 
 - Debug output contains multiple copies of the same information(SCGCQ01899293) 
 - PL: NVMe drives do not link up on non Ex4 backplane attached to an MR board(SCGCQ01878217) 
 - Ventura: IOC init may fail with Host Page Size Invalid LogInfo on backend PCIe disabled FW(SCGCQ01916779) 
 - Ventura B0: Controller fault 0x7C41 observed during IO+System power cycle test(SCGCQ01790305) 
 - Ventura PL: New HW Workaround for 0x670A Fault(SCGCQ01841683) 
 - Fix to CSET SCGCQ01605489(SCGCQ01837880) 
 - pl: NVMe: Reference Temperature in the Temperature log page is incorrect(SCGCQ01807465) 
 - pl: NVMe: unexpected read/write IO failure with SkipCount error(SCGCQ01835109) 
 - pl: NVMe: TransferCount in the SCSI IO error reply message may be invalid(SCGCQ01830303) 
 - pl: backend PCIe: EC59 fault after failed switch discovery(SCGCQ01824028) 
 - Aero3 RMC: Fix reset of PSW M0 in RMC reset code	(SCGCQ01698264) 
 - Register type definition for Status register is incorrect.(SCGCQ01753001) 
 - IO not completing or being timed out if some cases when an unconfirmed response is received for an IO.(SCGCQ01718897) 
 - pl: backend PCIe: unsupported completion timeout capabilities don't cause init failure(SCGCQ01906471) 
 - Ventura: Fault 0x2805 encounted if one configures NVME and AutoPortEnable at the same time(SCGCQ01868375) 
 - VenturaB0: SAS/SATA drives are not getting discovered with NVMe disabled firmware on both Crusader 9400-16iB0 and 9405W-16iB0(SCGCQ01876271) 
 - pl: Fault 0xECAD while issuing controller reset in Ex1 configuration	(SCGCQ01859166) 
 - Ventura: UBM1005: Avoid PCIe reset request to FRU Port Descriptor unsupported PCIe drive types in DFC slots(SCGCQ01858809) 
 - MCTP: Fault 0x265D when packet with StartOfMsg is set and PktSeqCount is 1(SCGCQ01850721) 
 - Aero: backend PCIe: 265D fault with more than 1 Atlas switch	(SCGCQ01832995) 
 - SPI_LIBRARY: Add make.exe for systems without a gmake in their path(SCGCQ01830047) 
 - SPI flash write verification error when flash suspend feature is enabled.(SCGCQ01747153) 
 - pl: backend PCIe: PCIe port enable may time out(SCGCQ01849314) 
 - FW may fail to complete device discovery with certain TA-1005 UBM backplane configurations(SCGCQ01845203) 
 - vSES Listing multiple Array Device Elements for wide port devices (i.e., x2 or x4 NVMe or Wide SAS(SCGCQ01810677) 
 - Ventura B0: SAS and SATA drives may not get discovered on 9400-8e/16e(SCGCQ01851537) 
 - pl: NVMe: SCSI log page temperature may be incorrect in some cases(SCGCQ01804437) 
 - Ventura PL: 0x670A Fault During Destructive Domain Testing	(SCGCQ01831332) 
 - pl: port enable timeout and discovery failure with multiple VPP device configurations(SCGCQ01870862) 
 - pl: Fault 0xED22 seen on bootup(SCGCQ01868009) 
 - Ventura PL: Check in Revised Workaround for 0x5842 fault - Rx Dma Memory Overflow(SCGCQ01864843) 
 - Update the common header file to avoid compilation fail.(SCGCQ01886583) 
 - Ventura: OEM SW Enclosure Amber LED stays on after reboot(SCGCQ01898852) 
 - Ventura: Discovery may not complete, timeout on 94xx-8i HBA(SCGCQ01904851) 
 - pl: NVMe: E40A fault if WRPROTECT or RDPROTECT is nonzero(SCGCQ01892105) 
 - Mismatch between data coming from Page2 and PageA in vSES(SCGCQ01859095) 
 - Comments in plStates.c and plStates.h are wrong(SCGCQ01909770) 
 - pl: backend PCIe: parent switch port lookup may generate incorrect pointer(SCGCQ01883220) 
 - pl: backend PCIe: link fails to come up after a surprise down(SCGCQ01886012) 
 - pl: backend PCIe: bug when setting up direct attached PL structures(SCGCQ01915755) 
 - Aero: backend PCIe: buffer overflow during discovery of cascaded switches(SCGCQ01832807) 
 - Ventura Phase 9 build failure(SCGCQ01830200) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted	(SCGCQ01760627) 
 - Flash suspend feature is partially disabled based on initialization input option.(SCGCQ01750006) 
 - IOC_CTRL_OP_ALL_PHY_LOOPBACK operation is not working(SCGCQ01670396) 
 - Ventura/Aero: makespi.cmd has a system command not supported on some build systems(SCGCQ01829985) 
 - Ventura: PLI control requests may return incorrect status when backend PCIe support is disabled(SCGCQ01887433) 
 - pl: backend PCIe: potential for link degradation after multiple link downs(SCGCQ01848040 port of SCGCQ01793209) 
 - (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command.(SCGCQ01714280 port of SCGCQ01681441) 
 - IOC_CTRL_OP_ALL_PHY_LOOPBACK operation is not working(SCGCQ01792619 port of SCGCQ01670396) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted	(SCGCQ01794153 port of SCGCQ01760627) 
 - [Ventura][PL] Applications trying to update NVMe device Firmware with Mode E fails.(SCGCQ01849388 port of SCGCQ01624790) 
 - Ventura PL: Check in Revised Workaround for 0x5842 fault - Rx Dma Memory Overflow(SCGCQ01896576 port of SCGCQ01864843) 
 - To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues(SCGCQ01851004 port of SCGCQ01765873) 
 - Ventura: Attaching multiple PCIe switches may cause IOP memory corruption(SCGCQ01875221 port of SCGCQ01853893) 
 - [ventura] PL Fault 0000ecc9 observed, while running doing drive Pull-Push with IO's in background(SCGCQ01817256 port of SCGCQ01804290) 
 - Heavy IO with low IO timeout test may result into an IO getting missed.(SCGCQ01840466 port of SCGCQ01631346) 
 - Fault 4311 when running repeated controller resets(SCGCQ01872930 port of SCGCQ01865882) 
 - Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes.(SCGCQ01893313 port of SCGCQ01671177) 
 - [Ventura][PL] TM Hangs when doing drive push pull test case(SCGCQ01817002 port of SCGCQ01792208) 
 - (SATA Only) SCSI Start Stop Unit command with power condition set to standby may fail for SATA drives.(SCGCQ01839608 port of SCGCQ01833392) 
 - [vSES] Vendor ID and Product ID of Configuration diagnostic page uses hardcoded values.(SCGCQ01906461 port of SCGCQ01906013) 
 - Add workaround for SATA drive not complaint with ACS-3(SCGCQ01935094 port of SCGCQ01922154) 
 - (NVME) Fw Fault (faultcode 0xEC56) hit while performing system reboot test with NVMe drives attached.(SCGCQ01944370 port of SCGCQ01932728) 
 - MCTP: Fault 0x265D when packet with StartOfMsg is set and PktSeqCount is 1(SCGCQ01966436 port of SCGCQ01850721) 
 - vSES: CRIT or NON CRIT bits in Enclosure Status Diagnostic page are never set.(SCGCQ01967409 port of SCGCQ01942781) 
 - (vSES) Injecting error on I2C channel of one connector module will cause LED of another connector module to not work.(SCGCQ01961501 port of SCGCQ01955094) 
 - vSES: Remove, RRAbort and Missing bits in array device element are not getting updated in element status page.(SCGCQ01967384 port of SCGCQ01932394) 
 - Fault 0x26A8 While Connecting Fully Populated Enclosure to 9400-8e Controller(SCGCQ01967850 port of SCGCQ01944622) 
 - PL : Task management timeout is observed if the task management type is invalid(SCGCQ01979551 port of SCGCQ01969521) 
 - Race condition can allow IOs over OOB to removed drive, with no host IOs, to not be cleaned up, and possibly leading to new drives not showing up(SCGCQ01807248 port of SCGCQ01400110) 
 - IOP: MCTP: Add NVDATA timeout parameter on message re-assembly(SCGCQ01836908 port of SCGCQ01223839) 
 - (SATA Only) SCSI Start Stop Unit command with power condition set to standby may fail for SATA drives.(SCGCQ01839609 port of SCGCQ01833392) 
 - Ventura: Attaching multiple PCIe switches may cause IOP memory corruption(SCGCQ01857051 port of SCGCQ01853893) 
 - The Aero3 build does not compile	(SCGCQ01972941 port of SCGCQ01944855) 
 - MR 7.8 Package fails to spin-up multiple SAS SPL-2 Power Control capable drives(SCGCQ01969861 port of SCGCQ01963504) 
 - (vSES) Injecting error on I2C channel of one connector module will cause LED of another connector module to not work.(SCGCQ01961502 port of SCGCQ01955094) 
 - (NVME) Fw Fault (faultcode 0xEC56) hit while performing system reboot test with NVMe drives attached.(SCGCQ01944365 port of SCGCQ01932728) 
 - Ventura: Use full Slot Cap Physical Slot Number field info for PCIe SW attached device slot enumeration(SCGCQ01941126 port of SCGCQ01936123) 
 - vSES: Remove, RRAbort and Missing bits in array device element are not getting updated in element status page.(SCGCQ01973959 port of SCGCQ01932394) 
 - Fault 0x26A8 While Connecting Fully Populated Enclosure to 9400-8e Controller(SCGCQ01967851 port of SCGCQ01944622) 
 - vSES SES Page 0Ah may report same SAS address for two elements during hot remove/add of NVMe devices(SCGCQ01972964 port of SCGCQ01934145) 
 - vSES: CRIT or NON CRIT bits in Enclosure Status Diagnostic page are never set.(SCGCQ01973961 port of SCGCQ01942781) 
 - PL: SAS Drives Take a Long Time to Link Up and Are Not Discovered Correctly	(SCGCQ01996142 port of SCGCQ01973566) 
 - Customer specific back plane not detected in the latest code phase(SCGCQ01972932 port of SCGCQ01961997) 
 - PL : Task management timeout is observed if the task management type is invalid	(SCGCQ01979552 port of SCGCQ01969521) 
 - Ventura: OEM 24 drives PCIe Switch secondary VMD mode enable may not complete successfully(SCGCQ01960497 port of SCGCQ01957675) 
 - PL Spinup: Firmware Takes a Long Time to Grant Spinup to Some Drives/Phys(SCGCQ01996445 port of SCGCQ01963394) 
 - PDB data path parity error workaround(SCGCQ02018315 port of SCGCQ01733783) 
 - MCTP: MCTP over PCIe VDM Discovery can fail if Set EID and Port Enable collide(SCGCQ02032594 port of SCGCQ02029912) 
 - MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events(SCGCQ01760767 port of SCGCQ01742362) 
 - IO not completing or being timed out if some cases when an unconfirmed response is received for an IO.(SCGCQ01767091 port of SCGCQ01718897) 
 - Race condition can allow IOs over OOB to removed drive, with no host IOs, to not be cleaned up, and possibly leading to new drives not showing up(SCGCQ01605489 port of SCGCQ01400110) 
 - Data NAK of large master TX packet can stop I2C out of band	(SCGCQ01766431 port of SCGCQ01713685) 
 - PL support for monitoring drive temperature during sanitize operation in progress(SCGCQ01753177 port of SCGCQ01600693) 
 - (SATA Only) Sense descriptor not filled properly for SCSI ATA Passthrough command failed by drive with SDA bit set(SCGCQ01788567 port of SCGCQ01784132) 
 - pl: NVMe: ECF0 fault	(SCGCQ01800735 port of SCGCQ01790929) 
 - Ventura: OEM PCIe dual switch attached backplane slot status LED stays Amber on partial slots(SCGCQ01826014 port of SCGCQ01788989) 
 - Data NAK of large master TX packet can stop I2C out of band	(SCGCQ01766430 port of SCGCQ01713685) 
 - Ventura: OEM ID66 PCIe Switch backplane Slots Status Amber LEDs stay blinking(SCGCQ01772655 port of SCGCQ01687610) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted (part 2	(SCGCQ01794972 port of SCGCQ01727593) 
 - Ventura: Locate operation to SAS/SATA drive slot may not turn on the status LED on OEM backplane	(SCGCQ01811106 port of SCGCQ01789068) 
 - pl: NVMe: unexpected read/write IO failure with SkipCount error(SCGCQ01838023 port of SCGCQ01835109) 
 - pl: Locate LED on SFF-TA-1005 Ux4 backplanes configured in x16 or x8 HFC emulation mode is not activated by storcli command(SCGCQ01873143 port of SCGCQ01866800) 
 - Fault 4311 when running repeated controller resets(SCGCQ01872931 port of SCGCQ01865882) 
 - pl UBM SFF-TA-1005: Locate LED cannot be turned off after diag reset	(SCGCQ01891218 port of SCGCQ01884070) 
 - pl UBM: Locate LED cannot be turned off after diag reset for few drives on Ex1 Elrond(SCGCQ01907168 port of SCGCQ01905070) 
 - [vSES] Vendor ID and Product ID of Configuration diagnostic page uses hardcoded values.(SCGCQ01906462 port of SCGCQ01906013) 
 - Ventura MSS: Multi-bit ECC, EFI SAS DRIVER issue seen when performed multi reboot stress from UEFI(SCGCQ01822452 port of SCGCQ01794025) 
 - MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events(SCGCQ01766712 port of SCGCQ01742362) 
 - pl: NVMe: Reference Temperature in the Temperature log page is incorrect	(SCGCQ01808970 port of SCGCQ01807465) 
 - [Ventura][PL] TM Hangs when doing drive push pull test case(SCGCQ01817009 port of SCGCQ01792208) 
 - MCTP: 0x265D fault occurs when running high MCTP PCIe VDM load with MCTP Discovery commands(SCGCQ01833182 port of SCGCQ01790303) 
 - Ventura PL: New HW Workaround for 0x670A Fault(SCGCQ01842595 port of SCGCQ01841683) 
 - pl: NVMe: unexpected switch attached task management timeouts(SCGCQ01791046 port of SCGCQ01763332) 
 - pl: backend PCIe: debug info for port enable subsystem integration(SCGCQ01818293 port of SCGCQ01817645) 
 - pl SFF-TA-1005: All Ux4 drives are not discovered in x8 or x16 HFC mode while hot-plugging(SCGCQ01887446 port of SCGCQ01877041) 
 - Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes.(SCGCQ01893314 port of SCGCQ01671177) 
 - Heavy IO with low IO timeout test may result into an IO getting missed.(SCGCQ01840468 port of SCGCQ01631346) 
 - pl: NVMe: TransferCount in the SCSI IO error reply message may be invalid(SCGCQ01831794 port of SCGCQ01830303) 
 - Interrupts not handled in fault state if a high priority interrupt handler faults(SCGCQ01803325 port of SCGCQ01802508) 
 - 0x6004 Fault running TM only test(SCGCQ01876864 port of SCGCQ01858982) 
 - pl: vSES reports incorrect product revision level in SES page 1(SCGCQ01883332 port of SCGCQ01877030) 
 - MR7.8: CTRL does not detect drives with SAS3.5CtrlFw_Ventura_Ph_9.0 08.250.09.00 and 10 as well(SCGCQ01917864 port of SCGCQ01914192) 
 - PL UBM : SAS, SATA drives in Elrond UBM backplane(SFF-TA-1005(SCGCQ01911215 port of SCGCQ01897599) 
 - PL UBM : SAS, SATA drives in Elrond UBM backplane(SFF-TA-1005(SCGCQ01918898 port of SCGCQ01897599) 
 - Incorrect Element status reported in SES Page 2 by vSES when connected to an expander(SCGCQ01824998 port of SCGCQ01822333) 
 - PL needs to check if we have a path to the end device before issuing a device reset to an NVMe drive as a part of TM	(SCGCQ01826239 port of SCGCQ01826234) 
 - To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues(SCGCQ01851007 port of SCGCQ01765873) 
 - [ventura] PL Fault 0000ecc9 observed, while running doing drive Pull-Push with IO's in background(SCGCQ01829989 port of SCGCQ01804290) 
 - pl UBM: Ux4 drives not discovered in Polling Mode with HFCx16 and x8	(SCGCQ01906082 port of SCGCQ01896578) 
 - pl: NVMe: SCSI log page temperature may be incorrect in some cases(SCGCQ01807316 port of SCGCQ01804437) 

EnhancementRequest:
 - Aero/Ventura: Create a build environment in the SPI_LIBRARY component(SCGCQ01819132) 
 - SCONS: Add Doxygen builder(SCGCQ01282782) 
 - Add source utilities	(SCGCQ01287449) 
 - Add debug string builders(SCGCQ01288927) 
 - SCons armv5 build server support	(SCGCQ01393685) 
 - Aero release support(SCGCQ01392706) 
 - SBLIB API functions need to do a sbliInitialize check(SCGCQ01861986) 
 - BST: Update bst scripts to support por request(SCGCQ02018624) 
 - Aero3: Integrate sasparser 11.02.00.00 into Aero build process(SCGCQ01851153) 
 - Aero-3: Add securesign to build process of full firmware image(SCGCQ01509968) 
 - Create Secure Boot Library(SCGCQ01478545) 
 - Add multithreaded elftobin(SCGCQ01572366) 
 - Remove mpi3_type.h from sbliApi.h	(SCGCQ01824159) 
 - Added functionality to secureSign.exe to stamp the signed FW Image with the PublicKeyList ID for tracking purposes.(SCGCQ01839760) 
 - sblib: IT Integration issues	(SCGCQ01857288) 
 - Aero: Add checking of secure main firmware (APP(SCGCQ01856978) 
 - SFF-TA-1005 UBM: Additional error handling support(SCGCQ01833053) 
 - Support merging of multilple define sections from multiple yaml files.(SCGCQ01351246) 
 - Add site license warning suppression	(SCGCQ01416563) 
 - Improve SCons dependency tools(SCGCQ01496996) 
 - Suppress license warnings(SCGCQ01641063) 
 - Implemented secureSign.exe CLI tool for automating FW signing process with signImageX(SCGCQ01799918) 
 - Keep inc directory local(SCGCQ01878222) 
 - Secure Boot image validation support(SCGCQ01478605) 
 - RMC: Force RMC to be built when main firmware images are built.(SCGCQ01807469) 
 - Ventura: Support for IOP direct access of ISTWI devices that are not specified in Man page 43(SCGCQ01750098) 
 - Enable SRIS to enable external NVMe capability(SCGCQ01807622) 
 - Add nvmeProtocol.h to MR PL release(SCGCQ01837309) 
 - NVMe: SFF-TA-1005 UBM PCIe Power Management support(SCGCQ01763350) 
 - pl: backend PCIe: ordered event handling for cascaded switches(SCGCQ01850742) 
 - Ventura: Improve verbose "pl mids" output(SCGCQ01863333) 
 - Add ARMv5 tool support(SCGCQ01344659) 
 - Improve Scons error handling	(SCGCQ01390029) 
 - Avenger: Change symbol build tool from external executable to internal python(SCGCQ01494130) 
 - Add make support	(SCGCQ01572146) 
 - Add via file source utilities(SCGCQ01291806) 
 - Improvements to Avenger build tools(SCGCQ01400119) 
 - Disable efuse updates(SCGCQ01830292) 
 - Extend SATA Hinting to turn off after Port Enable is done(SCGCQ02046265) 
 - aviSerdesGenericSpicoEccCheck((SCGCQ01807158) 
 - ComboSerdes: add API function to wait for SAS to PCIe transition to complete(SCGCQ01928060) 
 - Aero-3: New CSW / 16FF Serdes(SCGCQ01448312) 
 - SPI Flash Suspend/Resume feature support.(SCGCQ01735536) 
 - Add support for mr build to get bin using fromelf(SCGCQ01501207) 
 - Remove inc flags from the via file(SCGCQ01521426) 
 - Update Channel board NVDATA to include info for automation of HwBoardImageConfig creation(SCGCQ01803280) 
 - Update temperature sensor output	(SCGCQ01616949) 
 - Aero-3: Check Completor Posted Writes and Requestor Posted Writes bits in FPE Status 1 in determining Idle(SCGCQ01824153) 
 - Aero: Get FPGA to scheduling loop(SCGCQ01766800) 
 - Ventura: Eliminate need for IOPRINT_X_DEFAULT_08X(SCGCQ01488980) 
 - Ventura: Integrate SPI_LIBRARY project build system to the IT firmware(SCGCQ01680530) 
 - Aero3: Create Aero3 non-FPGA nvdata(SCGCQ01764985) 
 - Aero: backend PCIe: Downstream Port Containment(SCGCQ01828062) 
 - SPI_LIBRARY: Modify the component so that the basetypes file is optional(SCGCQ01827876) 
 - ISTWIToolBox command handling using parameters passed in from the host(SCGCQ01824007) 
 - pl: backend PCIe: change the Predetermined Number of Lanes setting to 1(SCGCQ01784774) 
 - SFF-TA-1005 UBM: Backplane change detection polling mode support(SCGCQ01727552) 
 - Aero: backend PCIe: root port 16GT/s lane equalization(SCGCQ01614673) 
 - Aero: backend PCIe: Gen4 hardware and device init(SCGCQ01380060) 
 - SFF-TA-1005 UBM: UBM HFC RefClk control, DFC drive presence detection and Port Reset control(SCGCQ01750204) 
 - pl: backend PCIe: runtime control of Atlas switch support (part 2(SCGCQ01853888) 
 - pl: Aero: remove Atlas 32-bit address space workaround(SCGCQ01763386) 
 - SFF-TA-1005 UBM: UBM backplane CHANGE_DET# Signal Interrupt support(SCGCQ01727480) 
 - Remote Flash utility for Avenger.(SCGCQ01618931) 
 - Implement Secure Boot Library changes needed for MegaRAID(SCGCQ01797407) 
 - Aero: backend PCIe: support for Atlas physical slot numbering(SCGCQ01845211) 
 - Added pmuMsg.h file to project.(SCGCQ01832975) 
 - Ventura: Make SGPIO as vSES default backplane mgmt. method(SCGCQ01792989) 
 - Aero DDR: Software based Read Fifo(SCGCQ01767237) 
 - Aero-3: Update Copyright to Broadcom	(SCGCQ01732998) 
 - PL SATL: RC BASIS Handling for SCSI Read Capacity 16 for SMR SATA drives	(SCGCQ01615537) 
 - Aero-3: Add support for MCTP Discovered Flag clearing due to BDF change(SCGCQ01533535) 
 - Aero-3: Update CCR headers to reflect latest register map.(SCGCQ01826405) 
 - Aero: backend PCIe: basic Atlas validation board bringup	(SCGCQ01794264) 
 - Aero DDR: PHY based Gate Training(SCGCQ01405423) 
 - Added optional argument to enabled signImageX command to generate public key hash bin files.(SCGCQ01845116) 
 - sblib: Add release component support	(SCGCQ01867576) 
 - sblib: Improve key update test cases	(SCGCQ01830308) 
 - Aero-3: Create Temporary IT Release Script(SCGCQ01837898) 
 - Aero: Update CSW M0 firmware(SCGCQ01828153) 
 - pl: NVMe: tweak NVMe temperature threshold configuration(SCGCQ01808996) 
 - Misc changes for CHANGE_DET# Signal Interrupt and drive hot-plug support(SCGCQ01797168) 
 - Aero: pl: protocol cycle detector support for Aero(SCGCQ01794128) 
 - I2C BUS busy when BMC try to access other devices on the bus with MCTP disabled.(SCGCQ01697892) 
 - To do dynamic configuration of the PCIe link from the backplane configuration data(SCGCQ01507511) 
 - Aero DDR: Software based Write Leveling Cycle Adjustment(SCGCQ01405431) 
 - Aero-3: IOP: Host PCI Express 4 x8 interface	(SCGCQ01380006) 
 - pl: backend PCIe: Atlas base mode duplicate serial number handling(SCGCQ01819242) 
 - Aero DDR: Clean up Aero DDR lib(SCGCQ01789017) 
 - pl: backend PCIe: immediate retry of firmware initiated PCIe transactions during link recovery(SCGCQ01841059) 
 - NVMe Devices added to Inventory and support for NVME AEN	(SCGCQ01607921) 
 - sblib: Efuse update support(SCGCQ01764966) 
 - SBLIB: Add API's that allow the user to check all signatures in a component	(SCGCQ01870043) 
 - Remove mpi dependency from sblib api	(SCGCQ01864752) 
 - sblib: Integrate sblib with Aero IT(SCGCQ01865928) 
 - sblib: Increase compatiblity by relocating/renaming global variables	(SCGCQ01882599) 
 - pl: backend PCIe: add switch count to Manufacturing Page 9(SCGCQ01851624) 
 - Add debug prints and dump for new serdes(SCGCQ01831104) 
 - RMC: Remove old RMC binary from version control(SCGCQ01817562) 
 - Initial version of PSOC programming code(SCGCQ01794157) 
 - SFF-TA-1005 UBM - FRU device detection and FRU Record processing support(SCGCQ01727443) 
 - Add support for configuring PCA9555 IO expander for OEM VPP compatible backplane.(SCGCQ01807461) 
 - SFF-TA-1005 UBM: Drive Slot status LED control(SCGCQ01727586) 
 - Ventura: Modify PL to only allocate required config page buffer size(SCGCQ01817424) 
 - SFF-TA-1005 UBM: UBM Controller enumeration support(SCGCQ01727463) 
 - Ventura/Aero: Implement Extended Mfg Page 45 - Aladin Config Page - Implement Aladin Init(SCGCQ01680543) 
 - PL: Add Nvdata Option to Disable SPL-2 Power Capable Spinup(SCGCQ01823993)

  

Version  08.01.05.00-1
---------------
    BIOS            Firmware      UEFI Driver      
  9.15.00.00        08.00.03.00    8.00.00.00     

IT Phase 8 (new)
 
Defects:
 - Marlin RMC: Fix checking of cores in reset during ChipReset sequence.(SCGCQ01197528) 
 - ((SATA Only) Security Protocol In command complete without data transfer for allocation length not a multiple of 512.(SCGCQ01275335) 
 - Charlotte DVT (3616) - Fails PCI Express Compliance Configuration Test.(SCGCQ01320438) 
 - Ventura: MCTP PCIe VDM: Discovered flag is set in Endpoint Discovery command.(SCGCQ01486410) 
 - The soft FIFO size calculations don't take into account the data descriptor sf threshold.(SCGCQ01488633) 
 - Controller is not detecting in the storelib, after changing the mode from "set mode oob" command.(SCGCQ01494018) 
 - PL: Update internal macros.(SCGCQ01503214) 
 - Ventura build failure.(SCGCQ01505238) 
 - RMC: Prevent leakage of P credits during SoftReset(SCGCQ01507699) 
 - Fixed IOP coverity defect for intruder.(SCGCQ01508917) 
 - PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB.(SCGCQ01509770) 
 - Fault 0xC00C is occurred in random read running test.(SCGCQ01511237) 
 - pl: backend PCIe: 4311 fault with NVMe enabled.(SCGCQ01514521) 
 - Ventura hardware does not like the IOP enable method used here.(SCGCQ01514880) 
 - (SATA Only) LBPRZ bit in VPD page 0xB2 is never set for SATA devices.(SCGCQ01516277) 
 - pl: backend PCIe: non-NVMe endpoint not cleaned up on removal.(SCGCQ01516968) 
 - Fault(0x4330) is occurred during checking MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA.(SCGCQ01518952) 
 - Fixing the issues during bringup of the universal backplane.(SCGCQ01522148) 
 - pl: backend PCIe: switch attached discovery takes too long.(SCGCQ01522343) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2).(SCGCQ01523531) 
 - Ventura: Add early notification to new I2C-DMA-Less algorithm in case hardware doesn't interrupt.(SCGCQ01524953) 
 - pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset.(SCGCQ01526236) 
 - Handling of host PCI BAR programming changes after port enable.(SCGCQ01530295) 
 - pl: NVMe: EC0D fault.(SCGCQ01530402) 
 - PL Fault 0000ecdd LR 01403837 during initial discovery.(SCGCQ01531770) 
 - To fix issues for back plane configuration validation and LED control for the UBM backplane.(SCGCQ01533852) 
 - Ventura: Some toplevel PCE interrupts have a priority that is too low.(SCGCQ01534773) 
 - pl: backend PCIe: 4311 fault (part 3).(SCGCQ01537791) 
 - pl: NVMe: unexpected task management halt when a device goes missing.(SCGCQ01538012) 
 - Fault 5850 occurred in random read test with Task management.(SCGCQ01538680) 
 - pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment.(SCGCQ01540226) 
 - Ventura B0: FW blocking SATA devices behind enclosures.(SCGCQ01552996) 
 - (SATA Only) Incorrect sense data may be returned when a NCQ Queued Error Log data page is returned.(SCGCQ01553853) 
 - pl: backend PCIe: tweaks to the backend PCIe link configurations API.(SCGCQ01556422) 
 - IT/PL FW Compliance to use of NO FLUSH bit in START STOP UNIT based on SAT3.(SCGCQ01563244) 
 - pl: verify that RAID context Timeout value is nonzero before adding a timer.(SCGCQ01564757) 
 - pl: NVMe: admin command Abort Task reset type.(SCGCQ01565972) 
 - pl: backend PCIe: 'pl pci swregs' debug command is broken.(SCGCQ01566859) 
 - Ventura B0 Phase 7 - Fault 2805 hit after enabling auto port feature.(SCGCQ01572362) 
 - To fix the LED issue, VPP data and moving to change detect poll state.(SCGCQ01576165) 
 - (SATA Only.(SCGCQ01577907) 
 - pl: vSES - Enable Swap bit support in SES page 2.(SCGCQ01590780) 
 - Ventura B0: Windows server 2016 OS may not detect all drives on OEM backplane in a mixed mode config(SCGCQ01592762) 
 - Several firmware build utilities don't compile anymore.(SCGCQ01594270) 
 - Observed Exception during Test run: IocStatus: Insufficient Resources (0006).(SCGCQ01600177) 
 - Device block and unblock messages observed for the existing connected NVMe drives when new NVMe drive is inserted.(SCGCQ01615532) 
 - Firmware Build Utilities: AddImage utility gets flagged and removed by anti-virus software.(SCGCQ01619096) 
 - Ventura: Build time duration started displaying negative time.(SCGCQ01630393) 
 - ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA.(SCGCQ01639482) 
 - Missing code to handle no response in MCTP transmit buffer and send busy retry(SCGCQ01676010) 
 - Aero RMC: Fix non-secure boot mode(SCGCQ01683135) 
 - pl: NVMe: unnecessary SATA cleanup attempted during NVMe TM.(SCGCQ01683245) 
 - ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA.(SCGCQ01684262) 
 - Mercator: AHR failure when using workaround for SCGCQ01318807(SCGCQ01685001) 
 - SGPIO SCLK Glitch and Low upon coming out of reset(SCGCQ01697481) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted (part 2).(SCGCQ01727593) 
 - pl: backend PCIe: notification events for switches with no devices attached(SCGCQ01729831) 
 - Ventura: CFGI fails if the largest MPI defined config page is not included(SCGCQ01737603) 
 - Aero build fails.(SCGCQ01748072) 
 - pl: NVMe: unexpected switch attached task management timeouts(SCGCQ01763332) 
 - Ventura B0: 0x5842 fault while running IOs and error injection tests(SCGCQ01780777) 
 - (SATA Only)Sense descriptor not filled properly for SCSI ATA Passthrough command failed by drive with SDA bit set.(SCGCQ01784132) 
 - Ventura B0: Controller fault 0x7C41 observed during IO+System power cycle test(SCGCQ01790305) 
 - pl: NVMe: ECF0 fault(SCGCQ01790929) 
 - PL SATL: SANITIZE Command failing for SATA SMR drives with ZNR bit set(SCGCQ01800567) 
 - pl: NVMe: SCSI log page temperature may be incorrect in some cases(SCGCQ01804437) 
 - pl: NVMe: Reference Temperature in the Temperature log page is incorrect(SCGCQ01807465) 
 - pl: backend PCIe: debug info for port enable subsystem integration(SCGCQ01817645) 
 - Incorrect Element status reported in SES Page 2 by vSES when connected to an expander(SCGCQ01822333) 
 - PL needs to check if we have a path to the end device before issuing a device reset to an NVMe drive as a part of TM(SCGCQ01826234) 
 - pl: NVMe: TransferCount in the SCSI IO error reply message may be invalid(SCGCQ01830303) 
 - pl: NVMe: unexpected read/write IO failure with SkipCount error(SCGCQ01835109) 
 - Fix to CSET SCGCQ01605489(SCGCQ01837880) 
 - Ventura PL: New HW Workaround for 0x670A Fault(SCGCQ01841683) 
 - RMC: Add full interrupt disable to SBR Reload code(SCGCQ01212765) 
 - SCSI format command send to NVMe drives fails with CMPLIST flag set in addition to FMTDATA flag(SCGCQ01229799) 
 - SPI reset delay needs to be enabled in B0 revs(SCGCQ01241767) 
 - pl: NVMe: rapid device removal/add with a specific vendor backplane(SCGCQ01487423) 
 - pl: backend PCIe: workaround timer may trigger after too short of an interval(SCGCQ01518343) 
 - To fix the phy to slot mapping issue for the UBM backplane(SCGCQ01542497) 
 - PL: Implemented HW workaround to solve 6G SATA link fail problem(SCGCQ01554661) 
 - Ventura: If firmware download is done in small pieces, firmware download fails with logInfo 30010402(SCGCQ01558208) 
 - pl: backend PCIe: EC52 fault(SCGCQ01565749) 
 - Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail(SCGCQ01574224) 
 - Remove and Truncate command handler: IO was not failed with check condition(SCGCQ01594602) 
 - Aero-3: make aero doesn't compile(SCGCQ01614670) 
 -(SCGCQ01615484) 
 - Aero3: Signed CBB hangs(SCGCQ01624857) 
 - Aero DDR: DDR fails after issuing MSS reset(SCGCQ01685637) 
 - Ventura: OEM ID66 PCIe Switch backplane Slots Status Amber LEDs stay blinking(SCGCQ01687610) 
 - RMC: Need to use AHB path to write to Reset Status Register(SCGCQ01718319) 
 - Ventura: OEM PCIe dual switch attached backplane slot status LED stays Amber on partial slots(SCGCQ01788989) 
 - MCTP: 0x265D fault occurs when running high MCTP PCIe VDM load with MCTP Discovery commands(SCGCQ01790303) 
 - Update combo serdes library version.(SCGCQ01791178) 
 - Interrupts not handled in fault state if a high priority interrupt handler faults(SCGCQ01802508) 
 - Ventura PL: 0x670A Fault During Destructive Domain Testing(SCGCQ01831332) 
 - Ventura B0: Slot status updates to certain slot on NVMe backplane may not update the LED status(SCGCQ01573106) 
 - MCTP: Fault 0x265d while doing enclosure pull/push with OOB StoreLibIT when enabling AEN	  (SCGCQ01631826) 
 - (SATA Only)When ATA command fails with sense data available bit set, Data frame may not be released.(SCGCQ01732835) 
 - MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events(SCGCQ01742362) 
 - Fault C010 encountered when running IO to 9405W-16e in Target Mode(SCGCQ01368001) 
 - (SATA Only) Function field in MPI error reply message for SCSI ATA Pass-through request is not correct.(SCGCQ01638248) 
 - Ventura: In mixed topology, attn LED is non-functional for SAS/SATA drives on OEM backplane(SCGCQ01930666) 
 - PDB data path parity error workaround(SCGCQ01733783) 
 - To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues(SCGCQ01765873) 
 - Ventura: Locate operation to SAS/SATA drive slot may not turn on the status LED on OEM backplane(SCGCQ01789068) 
 - Negotiated Link Speed for the vSES target is displayed as 'Unknown'.(SCGCQ01606720) 
 - Not all NVMe drives were discovered after server cold or warm boot(SCGCQ01664963) 
 - Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes.(SCGCQ01671177) 
 - VPD is not shown by lspci(SCGCQ01687750) 
 - Not all NVMe drives discovered as part of hot plug operation(SCGCQ01697329)
- PL: Error LED stays on when drive is pulled out when using unusual slot mapping and drive presence check(SCGCQ01222315 port of SCGCQ01157331) 
 - 9305-16i - Activity LED signal is not asserted for port 2 and 3.(SCGCQ01382008 port of SCGCQ01318981) 
 -(SCGCQ01431063 port of SCGCQ01415060) 
 - SATA ONLY: VPD page 0xB2 LBPU bit not set correctly.(SCGCQ01511589 port of SCGCQ01374552 port of ) 
 - IOP: Differentiate between L2 correctable and uncorrectable faults(SCGCQ01512630 port of SCGCQ00929810) 
 - IOP: Faulting for correctable L2 parity errors(SCGCQ01512800 port of SCGCQ00934325) 
 - PL: SAS3 PHASE12 RAID creation failing with SATA drives.(SCGCQ01512834 port of SCGCQ00998155) 
 - Fault State (0x265d) is Observed While Connecting an Enclosure with Fully Populated SATA Drives(SCGCQ01513298 port of SCGCQ00856085) 
 - Fault State Fault State (0x265d) is Observed While Connecting an Enclosure with Fully Populated SATA Drives(SCGCQ01514262 port of SCGCQ00856085) 
 - IOP: Faulting for L2 Cache Correctable Errors(SCGCQ01514707 port of SCGCQ01264714) 
 - (SATA Only)Signature FIS not validated for Expander attached SATA drives(SCGCQ01514869 port of SCGCQ00852290) 
 - STANDBY_Z Bit Not Set in POWER CONDITION MODE PAGE When Mode Sense (10) is executed to NON EPC SATA Drive(SCGCQ01518957 port of SCGCQ00845242) 
 - Need to expose pure SEP devices through the inventory command(SCGCQ01519056 port of SCGCQ00943216) 
 - pl: backend PCIe: workaround timer may trigger after too short of an interval(SCGCQ01519802 port of SCGCQ01518343) 
 - pl: NVMe: rapid device removal/add with a specific vendor backplane(SCGCQ01522511 port of SCGCQ01487423) 
 - pl: backend PCIe: 4311 fault with NVMe enabled (part 2)(SCGCQ01523550 port of SCGCQ01523531) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01525228 port of SCGCQ01450475) 
 - pl: backend PCIe: non-NVMe endpoint not cleaned up on removal(SCGCQ01529383 port of SCGCQ01516968) 
 - PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB(SCGCQ01529512 port of SCGCQ01509770) 
 - PL: Change to Customer Specific SMP Response Report Manufacturer(SCGCQ01533308 port of SCGCQ01505468) 
 - PL Fault 0000ecdd LR 01403837 during initial discovery(SCGCQ01539840 port of SCGCQ01531770) 
 - Increase the default SES buffer size to 2K(SCGCQ01540666 port of SCGCQ01506013) 
 - PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path(SCGCQ01556419 port of SCGCQ01520524) 
 - pl: backend PCIe: switch attached discovery takes too long(SCGCQ01556426 port of SCGCQ01522343) 
 - Collect enclosure Bay ID from OEM specificinternal backplanes(SCGCQ01562101 port of SCGCQ01503517) 
 - pl: NVMe: device may not appear in OS following NVMe init failure(SCGCQ01594709 port of SCGCQ01593528) 
 - pl: NVMe: Write Long (10)(SCGCQ01595859 port of SCGCQ01593652) 
 - DDRlib failures occur if debug prints are disabled.(SCGCQ01599770 port of SCGCQ01482222) 
 - pl: NVMe: D102 fault(SCGCQ01608155 port of SCGCQ01605590) 
 - (SATA Only)SCSI Unmap command to some SATA drives are timing out.(SCGCQ01615122 port of SCGCQ01539572) 
 - (SATA Only)ATA Request Sense Ext command sometimes not send when the drive responds with 'Sense Data Available' bit set.(SCGCQ01615159 port of SCGCQ01571933) 
 - (SATA Only)Only) ATA Request Sense Ext command not sent for failed SCSI Unmap command sent to a SATA drive.(SCGCQ01615209 port of SCGCQ01593844) 
 - (SATA Only)Only) Incorrect data sent in response of SCSI Inquiry command for some SATA drives.(SCGCQ01616465 port of SCGCQ01599707) 
 - Increase the default SES buffer size to 2K.(SCGCQ01616503 port of SCGCQ01506013) 
 - (SATA Only)Only) Timer for SCSI Write Verify command to a SATA drive might get removed before command completion.(SCGCQ01616558 port of SCGCQ01593136) 
 - (SATA Only)Only) ATA Request Sense Ext command being sent after ATA command translated for SCSI Start Stop Unit command fails with Sense Data Available.(SCGCQ01618209 port of SCGCQ01599542) 
 - Task Management due to SATA init failure results in resource error message(SCGCQ01618661 port of SCGCQ01605610) 
 - pl: backend PCIe: EC59 fault(SCGCQ01618750 port of SCGCQ01615981) 
 - PL Enclosure Management: SEP Blink Request Fails After Path 1 Disconnect in Multipath Topology(SCGCQ01619021 port of SCGCQ01618625) 
 - pl: NVMe: 61A6 fault.(SCGCQ01619934 port of SCGCQ01602703) 
 - (SATA Only)SCSI Unmap command to some SATA drives are timing out.(SCGCQ01621120 port of SCGCQ01539572) 
 - Not all NVMe drives are discovered on VPP backplane Enclosure.(SCGCQ01623525 port of SCGCQ01620856) 
 - IO starvation and performance degradation when using dma Q masking feature.(SCGCQ01627326 port of SCGCQ01505074) 
 - When spinup delay in expander is configured to a high value it might result in some drives being reset by controller repeatedly.(SCGCQ01628174 port of SCGCQ01601413) 
 - The change detect feature macro missing, leading to compilation issue(SCGCQ01628450 port of SCGCQ01616460) 
 - The PCIe reset to be handled properly for the Change detect feature(SCGCQ01628453 port of SCGCQ01623437) 
 - (SATA Only) Incorrect Sense Key and Additional Sense Code set for failed Start Stop Unit command.(SCGCQ01630267 port of SCGCQ01628346) 
 - Ventura: No easy way to tell if config pages have been written(SCGCQ01630398 port of SCGCQ01630331) 
 - Ventura B0: 5813 fault while running destructive domain test(SCGCQ01630895 port of SCGCQ01623624) 
 - Negotiated Link Speed for the vSES target is displayed as 'Unknown'.(SCGCQ01639536 port of SCGCQ01606720) 
 - SES Page 2 does not show the correct status information for Direct Attached NVMe drives(SCGCQ01639840 port of SCGCQ01620857) 
 - Blank Boards with Auto Port Enable set in NVDATA will fault(SCGCQ01639859 port of SCGCQ01553238) 
 - SES Page 2 Overall Status-Status Info bits do not reflect the correct status after fault conditions are cleared(SCGCQ01639873 port of SCGCQ01620243) 
 - Align vSES diag page response with Expander SEP diag page response(SCGCQ01639886 port of SCGCQ01585387) 
 - MCTP: Fault 0x265d while doing enclosure pull/push with OOB StoreLibIT when enabling AEN(SCGCQ01675747 port of SCGCQ01631826) 
 - Ventura: Disable drive presence based PCIe RefClk and PERST control for OEM ID66 backplane(SCGCQ01676883 port of SCGCQ01670180) 
 - Not to do all drives reset at the start of the boot up on each port of the controller(SCGCQ01682349 port of SCGCQ01670965) 
 - pl: NVMe: E411 fault(SCGCQ01686689 port of SCGCQ01684788) 
 - IO unit control IOC_CTRL_OP_ALL_PHY_LOOPBACK_DIAG hangs on 8 phy controller(SCGCQ01687624 port of SCGCQ01623477) 
 - Ventura B0: Fault 0x4311 while running HBA phys off/on & drive hard reset(SCGCQ01687743 port of SCGCQ01619417) 
 - Mercator Phase7: VMWare PSODs due to NMI error when the Windows VM that has passthrough controller is being shutdown(SCGCQ01697675 port of SCGCQ01617769) 
 - VPD is not shown by lspci(SCGCQ01698316 port of SCGCQ01687750) 
 - (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command.(SCGCQ01713180 port of SCGCQ01681441) 
 - (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command.(SCGCQ01714249 port of SCGCQ01681441) 
 - Unhandled exception results in a fault(SCGCQ01721368 port of SCGCQ01686666) 
 - (SATA Only) When ATA command fails with sense data available bit set, Data frame may not be released.(SCGCQ01745744 port of SCGCQ01732835) 
 - MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events(SCGCQ01760767 port of SCGCQ01742362) 
 - Host memory corruption seen during Progress polling of Sanitize operation on SATA drives(SCGCQ01762343 port of SCGCQ01721050) 
 - IO not completing or being timed out if some cases when an unconfirmed response is received for an IO.(SCGCQ01767091 port of SCGCQ01718897) 
 - PL: Add NVDATA Option to Force Programmed Physical Link Rates to 0 in SMP Phy Control Request(SCGCQ01788903 port of SCGCQ01614814) 
 - IOC_CTRL_OP_ALL_PHY_LOOPBACK operation is not working(SCGCQ01792619 port of SCGCQ01670396) 
 - pl: backend PCIe: port enable may complete before PCIe mode is attempted(SCGCQ01794153 port of SCGCQ01760627) 
 - [Ventura][PL] Applications trying to update NVMe device Firmware with Mode E fails.(SCGCQ01849388 port of SCGCQ01624790) 
 - Ventura PL: Check in Revised Workaround for 0x5842 fault - Rx Dma Memory Overflow(SCGCQ01896576 port of SCGCQ01864843) 
 - Add workaround for SATA drive not complaint with ACS-3(SCGCQ01935094 port of SCGCQ01922154) 
 - (NVME)Fw Fault (faultcode 0xEC56) hit while performing system reboot test with NVMe drives attached.(SCGCQ01944370 port of SCGCQ01932728) 
 - Source code uses tlbInitHDCW and HDCW instead of HCDW(SCGCQ01118580 port of SCGCQ01089693) 
 - PL: SSD drop by SAS3008 during the hotplug test.(SCGCQ01516685 port of SCGCQ00897639) 
 - Coverity defects : The function seem called twice and identical code in different branches.(SCGCQ01516906 port of SCGCQ00939071) 
 - Ventura hardware does not like the IOP enable method used here.(SCGCQ01519729 port of SCGCQ01514880) 
 - (SATA Only) LBPRZ bit in VPD page 0xB2 is never set for SATA devices(SCGCQ01524353 port of SCGCQ01516277) 
 - Controller is not detecting in the storelib, after changing the mode from "set mode oob" command(SCGCQ01530310 port of SCGCQ01494018) 
 - pl: NVMe: EC0D fault.(SCGCQ01533267 port of SCGCQ01530402) 
 - Storlib observed ERROR_MCTP_PAYLOADID_PE_INVALID_PARAM while doing attn-btn test(SCGCQ01542429 port of SCGCQ01423338) 
 - covery defects on Intruder 19849 & 19842(SCGCQ01542431 port of SCGCQ01484250) 
 - pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment(SCGCQ01556893 port of SCGCQ01540226) 
 - Performance Improvements(SCGCQ01562099 port of SCGCQ01455538) 
 - pl: NVMe: modify Bus Master Enable usage during NVMe controller reset(SCGCQ01587095 port of SCGCQ01581273) 
 - pl: backend PCIe: generic message header dWords 2 and 3 are swapped(SCGCQ01599051 port of SCGCQ01598812) 
 - Ventura B0 Phase 7 - Fault E404 during IOTM testing with 24 NVMe drives and 3 switches(SCGCQ01600602 port of SCGCQ01570622) 
 - Requested capacity field translations are incorrect for remove element & truncate command(SCGCQ01614097 port of SCGCQ01510418) 
 - (SATA Only) ATA Request Sense Data Ext command not send to device when it fails translated SCSi Security Protocol Out.(SCGCQ01618558 port of SCGCQ01605100) 
 - Ventura: FW Signing Support failing with loginfo during FWDL(SCGCQ01618988 port of SCGCQ01605427) 
 - pl: NVMe: hot-added device may not appear in OS during heavy IO load(SCGCQ01619018 port of SCGCQ01616267) 
 - Ventura: Duplicate slot numbers assigned for drives in certain mixed mode cabling configurations(SCGCQ01623485 port of SCGCQ01606122) 
 - pl: NVMe: ECEC fault(SCGCQ01623903 port of SCGCQ01620613) 
 - To implement the CHANGE_DETECT GPIO feature for the UBM backplanes(SCGCQ01628440 port of SCGCQ01507506) 
 - Change detect feature support on UBM supported back plane(SCGCQ01628444 port of SCGCQ01605371) 
 - The PCIe reset to be handled properly for the Change detect feature(SCGCQ01628452 port of SCGCQ01623437) 
 - (SATA Only) SCSI Log Select command not failed with check condition when translated ATA command is failed by SATA drive.(SCGCQ01633320 port of SCGCQ01631836) 
 - PL: Change to Customer Specific SMP Response Report Manufacturer(SCGCQ01639906 port of SCGCQ01505468) 
 - PL: Port Glitch on Direct Attached SATA drives,lead IO stop/File system become read only(SCGCQ01646094 port of SCGCQ01572062) 
 - Not to do all drives reset at the start of the boot up on each port of the controller(SCGCQ01681401 port of SCGCQ01670965) 
 - Not all NVMe drives were discovered after server cold or warm boot(SCGCQ01732107 port of SCGCQ01664963) 
 - Not all NVMe drives discovered as part of hot plug operation(SCGCQ01732136 port of SCGCQ01697329) 
 - The x4 link configuration was not detected by UBM module(SCGCQ01735502 port of SCGCQ01735485) 
 - PL: Avoid Duplicate Mid Workaround Does Not Start a TM If Device is Removed and Re-Added(SCGCQ01748033 port of SCGCQ01715677) 
 - PL support for monitoring the progress of sanitize operation.(SCGCQ01753174 port of SCGCQ01591935) 
 - When spinup delay in expander is configured to a high value it might result in some drives being reset by controller repeatedly.(SCGCQ01761718 port of SCGCQ01601413) 
 - Data NAK of large master TX packet can stop I2C out of band(SCGCQ01766431 port of SCGCQ01713685) 
 - [Ventura][PL] TM Hangs when doing drive push pull test case(SCGCQ01798286 port of SCGCQ01792208) 
 - To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues(SCGCQ01851004 port of SCGCQ01765873) 
 - Ventura: Attaching multiple PCIe switches may cause IOP memory corruption(SCGCQ01875221 port of SCGCQ01853893) 
 - pl: backend PCIe: 4311 fault with NVMe enabled(SCGCQ01520574 port of SCGCQ01514521) 
 - (SATA Only)Security Protocol In command complete without data transfer for allocation length not a multiple of 512(SCGCQ01524638 port of SCGCQ01275335) 
 - pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset(SCGCQ01527219 port of SCGCQ01526236) 
 - IOP: FW to clear all pending PCI interrupts during a Function Level Reset (FLR(SCGCQ01534881 port of SCGCQ01523541) 
 - pl: backend PCIe: potential address range overlap(SCGCQ01592870 port of SCGCQ01586393) 
 - Fixing the issues during bringup of the universal backplane.(SCGCQ01599610 port of SCGCQ01522148) 
 - Race condition can allow IOs over OOB to removed drive, with no host IOs, to not be cleaned up, and possibly leading to new drives not showing up(SCGCQ01605489 port of SCGCQ01400110) 
 - (SATA Only) Incorrect Additional sense code when SCSI Format to a SATA drive fails(SCGCQ01615216 port of SCGCQ01598756) 
 - (SATA Only) Function field in MPI error reply message for SCSI ATA Pass-through request is not correct.(SCGCQ01668674 port of SCGCQ01638248) 
 - Ventura B0: Fault 0x4311 while running HBA phys off/on & drive hard reset(SCGCQ01698231 port of SCGCQ01619417) 
 - PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0(SCGCQ01715880 port of SCGCQ01715509) 
 - PL support for monitoring sanitize operation after controller/device reset.(SCGCQ01753176 port of SCGCQ01591995) 
 - [ventura] PL Fault 0000ecc9 observed, while running doing drive Pull-Push with IO's in background(SCGCQ01817256 port of SCGCQ01804290) 
 - Ventura MSS: Multi-bit ECC, EFI SAS DRIVER issue seen when performed multi reboot stress from UEFI(SCGCQ01822452 port of SCGCQ01794025) 
 - Heavy IO with low IO timeout test may result into an IO getting missed.(SCGCQ01840466 port of SCGCQ01631346) 
 - Fault 4311 when running repeated controller resets(SCGCQ01872930 port of SCGCQ01865882) 
 - Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes.(SCGCQ01893313 port of SCGCQ01671177) 
 - Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01530305 port of SCGCQ01450475) 
 - pl: NVMe: unexpected target reset task management timeout(SCGCQ01587064 port of SCGCQ01580026) 
 - PL: Port Glitch on Direct Attached SATA drives,lead IO stop/File system become read only(SCGCQ01615056 port of SCGCQ01572062) 
 - PL: (SATA Only)SSU Command for active power condition transition on EPC enabled drive fails with Additional sense Logical block address out of range(SCGCQ01640974 port of SCGCQ01640762) 
 - (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command.(SCGCQ01714280 port of SCGCQ01681441) 
 -(SCGCQ01748041 port of SCGCQ01615484) 
 - [Ventura][PL] TM Hangs when doing drive push pull test case(SCGCQ01817002 port of SCGCQ01792208) 
 - (SATA Only) SCSI Start Stop Unit command with power condition set to standby may fail for SATA drives.(SCGCQ01839608 port of SCGCQ01833392) 
 - To fix issues for back plane configuration validation and LED control for the UBM backplane.(SCGCQ01599611 port of SCGCQ01533852) 
 - IO starvation and performance degradation when using dma Q masking feature(SCGCQ01630921 port of SCGCQ01505074) 
 - ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA.(SCGCQ01684232 port of SCGCQ01639482) 
 - PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0(SCGCQ01715875 port of SCGCQ01715509) 
 - PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path(SCGCQ01749480 port of SCGCQ01520524) 
 - Avoid releasing I2C bus when I2C operation(Read/Write) in progress.(SCGCQ01752794 port of SCGCQ01721931) 
 - To fix the phy to slot mapping issue for the UBM backplane(SCGCQ01599612 port of SCGCQ01542497) 
 - Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail(SCGCQ01599616 port of SCGCQ01574224) 
 - MCTP: Fault 0x265D when packet with StartOfMsg is set and PktSeqCount is 1(SCGCQ01966436 port of SCGCQ01850721) 
 - vSES: CRIT or NON CRIT bits in Enclosure Status Diagnostic page are never set.(SCGCQ01967409 port of SCGCQ01942781) 
 - To fix the LED issue, VPP data and moving to change detect poll state(SCGCQ01599614 port of SCGCQ01576165) 
 - Change detect feature support on UBM supported back plane(SCGCQ01628442 port of SCGCQ01605371) 
 - Ventura: Disable drive presence based PCIe RefClk and PERST control for OEM ID66 backplane(SCGCQ01676884 port of SCGCQ01670180) 
 - pl: NVMe: 61A6 fault(SCGCQ01763390 port of SCGCQ01602703) 
 - [vSES] Vendor ID and Product ID of Configuration diagnostic page uses hardcoded values.(SCGCQ01906461 port of SCGCQ01906013) 
 - (vSES) Injecting error on I2C channel of one connector module will cause LED of another connector module to not work.(SCGCQ01961501 port of SCGCQ01955094) 
 - pl: backend PCIe: 4311 fault (part 3)(SCGCQ01574923 port of SCGCQ01537791) 
 - The x4 link configuration was not detected by UBM module(SCGCQ01747034 port of SCGCQ01735485) 
 - vSES: Remove, RRAbort and Missing bits in array device element are not getting updated in element status page.(SCGCQ01967384 port of SCGCQ01932394)
   
	
EnhancementRequests:
 - SATA SMR Only : Change for the FORMAT UNIT translation for SMR drives to also call RESET WRITE POINTER with ALL bit set(SCGCQ01218300) 
 - Add PLI Control Request to Fully Pause/Unpause FPE HW(SCGCQ01378809) 
 - Aero-3: CR#06: SPILib: Add necessary SPI timings to Aero/Sea to support multiple SPI Vendors(SCGCQ01380051) 
 - Aero-3: Update Clock, Configuration, and Reset (CCR) code.(SCGCQ01380109) 
 - Incorporate new PHY register initialization settings.(SCGCQ01405307) 
 - Aero DDR: PHY based Read Leveling(SCGCQ01405427) 
 - Aero DDR: PHY based Write Leveling(SCGCQ01405430) 
 - Aero: Internal Boot ROM Support(SCGCQ01410019) 
 - pl: backend PCIe: add API for getting backend PCIe link configurations(SCGCQ01437182) 
 - Re-enable flash initialization in bootloader.(SCGCQ01448314) 
 - (SATA Only) Add support for FIS Port (NCQ Encapsulation) of SCSI Write Same command.(SCGCQ01452113) 
 - MegaRaid VT BootLoader Flash Map Update For Ventura(SCGCQ01467197) 
 - Aero-3: Create framework for M0 processors(SCGCQ01499419) 
 - SAS3.5 (SATA Only): SATL need to send ATA REQUEST SENSE DATA EXT command when ATA device returns error and sense data available bit is on(SCGCQ01503732) 
 - Rebase Aero3 Development Stream and Verify Ventura Functionality(SCGCQ01509806) 
 - Ventura: Add MCTP over I2C Master Mode Option that doesn't use I2C DMA(SCGCQ01516871) 
 - Enable Backplane Management based on backplane type signal per HBA connector quad(SCGCQ01524982) 
 - pl: NVMe: add NVMe task management test code(SCGCQ01526049) 
 - Ventura: Specify leading zeros for the prints using %x in pl diag module(SCGCQ01533485) 
 - Aero-3: Update RMC FW to follow the steps from Aero SOC uArch spec(SCGCQ01533491) 
 - Add a new flag to IoFlags in pliStartScsiIo(SCGCQ01544740) 
 - Ventura: Ensure new I2C non_DMA code compiles with MCTP disabled(SCGCQ01548925) 
 - Remove ENET(Ethernet support Bit 26(SCGCQ01555034) 
 - Remove CSW library from AERO builds(SCGCQ01558186) 
 - Change the default behavior for I2C MCTP to non-DMA(SCGCQ01565737) 
 - Intruder: Modify NVDATA to enable DMA by default(SCGCQ01566619) 
 - Update build to calculate build duration(SCGCQ01572912) 
 - Ventura: Specify leading zeros for the prints using %x in plDebugStrings(SCGCQ01576200) 
 - pl: NVMe: add support for Security Protocol In/Out INC_512 flag(SCGCQ01582520) 
 - Disable mapping of some device side PCIe hardware into CPU's virtual address space(SCGCQ01582599) 
 - Aero-3: Modify CBB build so that it decreases the hardware reserved area (SBR(SCGCQ01595798) 
 - RMC must add PCE PLL/Core Initialization for Secure Mode(SCGCQ01608224) 
 - Aero-3: Review Aero Impala changes(SCGCQ01614623) 
 - Aero-3: Review Aero SAS core changes(SCGCQ01614628) 
 - Aero: backend PCIe: update config pages for 16GT/s(SCGCQ01614647) 
 - Flag added in AERO to avoid sending IO requests to IOA NVMe core that could potentially cause exceptions(SCGCQ01615545) 
 - Aero: enable backend PCIe support in the Aero build(SCGCQ01619936) 
 - pl: backend PCIe: basic PCI hot plug power controller support for switches(SCGCQ01633888) 
 - Aero DDR: DDR library initialization on the FPGA(SCGCQ01634738) 
 - pl: NVMe: remove vendor specific prototype code(SCGCQ01638257) 
 - pl: NVMe: support for nonzero doorbell stride(SCGCQ01670300) 
 - SPI_LIBRARY: Aero/Ventura Provide Sufficient Information to Uniquely Detect Auto-Configured devices(SCGCQ01679097) 
 - Improve build times(SCGCQ01715410) 
 - Fine Tune iMR RAID IO path performance(SCGCQ01715637) 
 - Add debug print for unrecognized initial FIS(SCGCQ01718317) 
 - Aero: Move RSA defines in mpi_temp.h to a common area(SCGCQ01727399) 
 - ComboSerdes: add APIs for firmware coordination with the protocol cycler(SCGCQ01761386) 
 - Convert Aero build to Aero3(SCGCQ01349949) 
 - Aero Fpga support(SCGCQ01367141) 
 - Aero-3: Update ARM CPU Speed to 1600 MHz(SCGCQ01392205) 
 - Aero: Add 300MHZ UART Clock Reference Support(SCGCQ01392831) 
 - Aero3: Add secure boot specified header and add support in rom utilities for it(SCGCQ01399079) 
 -(SCGCQ01418823) 
 - Improving SAS bus test coverage by checking PHY error count when linking at 12G speed using a SAS loopback.(SCGCQ01473898) 
 - PL: Create defines for plRequestFWBreak() Location Parameter(SCGCQ01499053) 
 - Aero-3: Ensure modifed SBR template data is compatible with Ventura(SCGCQ01509915) 
 - Support for NVDATA control of static slot number assignments for x2 or x4 NVMe devices(SCGCQ01511787) 
 - Ventura: Use non-DMA option for MCTP over I2C - Slave Mode(SCGCQ01516865) 
 - Ventura: Add symbol names to "iop show gic"(SCGCQ01519283) 
 - PCIe Switch attached NVMe Backplane LED Management support(SCGCQ01532296) 
 - Add Margay expander recognition to Ventura(SCGCQ01570647) 
 - Allow filtering of NVMe exception prints in debug mask(SCGCQ01575138) 
 - pl: NVMe: more NVMe TM test code(SCGCQ01605900) 
 - pl: backend PCIe: merge extended capability search functions(SCGCQ01613997) 
 - PL SATL: ZNR bit translation during SCSI SANITIZE command for SMR drive(SCGCQ01615513) 
 - Delete strings that are not used in plDebugStrings(SCGCQ01620668) 
 - Aero: backend PCIe: basic Atlas host interface board bringup(SCGCQ01736527) 
 - Ventura/Marlin: Detect attempt to downgrade from auto-detected SPI parts to non-auto and fail(SCGCQ01449329) 
 - PL: Use Sense Data from SATA Log Page 10 when querying Log Page 10(SCGCQ01459375) 
 - Aero: backend PCIe: modify outbound address window configuration(SCGCQ01485166) 
 - Ventura: Modify DMAless-I2C MCTP code so that that it processes most data in interrupts(SCGCQ01533036) 
 - Update tcc to version 0.9.27(SCGCQ01593619) 
 - PL: Add NVDATA Option to Force Programmed Physical Link Rates to 0 in SMP Phy Control Request(SCGCQ01614814) 
 - Ventura/Aero: (Child) Implement Extended Mfg Page 45 - Aladin Config Page - Add config page(SCGCQ01680542) 
 - To implement the CHANGE_DETECT GPIO feature for the UBM backplanes(SCGCQ01507506) 
 - Aero-3: Modify the Aero3 build so that the main firmware image has a MPI Component Header(SCGCQ01509807) 
 - Aero-3: Disable MCTP over PCIe VDM Workarounds(SCGCQ01533532) 
 - Ventura: Detect various user errors in firmware download(SCGCQ01534545) 
	
 

Version  06.02.00.02
---------------
Contains:
    BIOS            Firmware      UEFI Driver
  9.11.00.00        06.00.16.00   06.04.02.00
  
Fixed: Bug 142622 - [Libra] One of the SAS port from Lenovo 430-16e failed to log back to the controller during controller reset

Defects (4)
- pl: NVMe: ED8D fault related improvements.(SCGCQ01789903)
- PDB data path parity error workaround.(SCGCQ01733783)
- To support the SEP reset functionality through CPERST in order to avoid warm boot CPLD issues.(SCGCQ01765873)
- Ventura: Locate operation to SAS/SATA drive slot may not turn on the status LED on OEM backplane.(SCGCQ01789068)
- PL: Add NVDATA Option to Force Programmed Physical Link Rates to 0 in SMP Phy Control Request.(SCGCQ01788903 port of SCGCQ01614814)
- When spinup delay in expander is configured to a high value it might result in some drives being reset by controller repeatedly.(SCGCQ01761718 port of SCGCQ01601413)
- [Ventura][PL] TM Hangs when doing drive push pull test case.(SCGCQ01798286 port of SCGCQ01792208)
- pl: NVMe: 61A6 fault.(SCGCQ01763390 port of SCGCQ01602703)

EnhancementRequests (1)
- Permit multiple calls to avSerdesSASSDAddTxEqSeq and implement aviSerdesSASSDWaitIntrSmIdle for SAS35XFW.(SCGCQ01720492)

Version 06.01.00.07
---------------
Contains:
    BIOS            Firmware      UEFI Driver
  9.11.00.00        06.00.12.00   6.04.00.00

Defects (96)
- SAS Power Management and PCal do not work together.(SCGCQ01201827)
- pl: backend PCIe: ECE4 fault.(SCGCQ01312345)
- Ventura SBR: Changes to PLL reset requirements cause lock failure on some boards.(SCGCQ01373888)
- IOP: Improvements to AXI HWWA.(SCGCQ01390095)
- Ventura B0: Missing signing supported firmware image in RO.(SCGCQ01392675)
- PCI SIG Compliance Test Failure - Test 1_41 Link Capabilities 2, Link Control 2, Link Status 2 Failures.(SCGCQ01394478)
- Customer specific SAS 12g drive frequently links up at 6g..(SCGCQ01397553)
- pl: NVMe: async event persistent conditions monitor issues.(SCGCQ01414966)
- Internal Task Management operations not completing in out of resource conditions.(SCGCQ01415544)
- 0x6004 Fault during TM injection while running IO to Sata SSDs..(SCGCQ01416481)
- Add SAS device discovery error event to IOP message events..(SCGCQ01428178)
- Ventura: Misc tri-mode backplane mgmt detection fixes and Slot status update changes.(SCGCQ01428718)
- pl: NVMe: memory leak in Verify (10/12/16) command translation.(SCGCQ01429659)
- pl: Mode Select translation transfer length validation.(SCGCQ01435884)
- File name capitalization doesn't match #include and fails when building with Linux.(SCGCQ01439249)
- SGPIO Clock driven Low on host PCIe reset assertion causing SGPIO target to latch on invalid data.(SCGCQ01440481)
- Ventura B0: Fault 0x510B while doing reboot test along with IOs & TMs.(SCGCQ01440764)
- Ventura: NVMe Target: REPORT LUNS SCSI Command Failed With CC for Supported SELECT REPORT field Values 01h, 10h or 12h.(SCGCQ01444725)
- Ventura: NVMe Target: When MODE SENSE Command Executed for all supported Modes Pages, TRACK SKEW FACTOR Set as 0x01.(SCGCQ01444843)
- A previous code change is missing a few changes..(SCGCQ01449239)
- PL trying to perform memory move using address which is in the non-addressable range.(SCGCQ01450399)
- pl: NVMe: EC26 fault.(SCGCQ01451332)
- vSES Target: Incorrect Sense Data for REQUEST SENSE Command.(SCGCQ01451678)
- pl: backend PCIe: erroneous address pool copy.(SCGCQ01455651)
- pl: port enable may fail to complete if an OEM backplane is attached.(SCGCQ01455680)
- Ventura: Break up backplane mgmt device ISTWI Read/Write to the supported size.(SCGCQ01456349)
- Hot plugged NVMe drive fails to link up on OEM backplanes with ISTWI drive presence polling enabled.(SCGCQ01463496)
- Ventura: Firmware Update Algorithm Frees Mids Twice.(SCGCQ01465058)
- pl: NVMe: 6001 fault.(SCGCQ01468144)
- To support the I2C bus reserve state in the case of UBM backplane.(SCGCQ01470385)
- pl: NVMe: port enable may complete before devices link up.(SCGCQ01472531)
- Ventura VSES: Incorrect data in diagnostic page 0xA when drive is missing but not yet removed..(SCGCQ01472941)
- The "pl reg" command dumps the wrong amount of data for some structures..(SCGCQ01474266)
- PL: SATA: Sense Key/Additional Sense code incorrectly set when open zone issued on a Security locked SMR drive.(SCGCQ01478037)
- Ventura vSES: Direct attached NVME drives are not getting associated with vSES in Microsoft Storage Spaces Direct..(SCGCQ01478170)
- Drive addition in OS takes longer time when Drives are connected with certain backplanes to the controller.(SCGCQ01479406)
- SATL: Security Protocol Erase fails in SATL, but works well with ATA PT.(SCGCQ01479409)
- pl: NVMe: task management timeout may occur.(SCGCQ01480646)
- Ventura B0: Controller Reset causing OS hang and resets.(SCGCQ01480987)
- MPI SEP request to Slots with invalid SES Page 0A element index may not complete.(SCGCQ01482937)
- pl: NVMe: improved fix for 6001 fault.(SCGCQ01484382)
- pl: 265D fault on 'pl dbg' before port enable.(SCGCQ01485059)
- (SATA Only) Format of SATA SSD takes long time.(SCGCQ01485060)
- Ventura/Marlin: Firmware Download does not protect user from downgrading to firmware that does not support Winbond.(SCGCQ01485441)
- Host application hangs waiting for completion of IO issued after NVMe device is removed.(SCGCQ01486695)
- pl: NVMe: switch attached devices not detected under Windows.(SCGCQ01487291)
- SATA: Report Zone for very large data of 4MB takes ~2 seconds for processing.(SCGCQ01502700)
- Ventura FW may fault on single bit correctable ECC errors in IOA Local RAM.(SCGCQ01503262)
- pl: backend PCIe: additional phy hardware cleanup on link down and hot reset.(SCGCQ01504284)
- pl: backend PCIe: LTSSM state wait during hot reset.(SCGCQ01504310)
- SAS3.5FW_Common_Main was not stable after merging code changes for SCGCQ01421231.(SCGCQ01508018)
- (SATA Only) SCT Error Recovery Control read using ATA Passthrough is not returning correct values.(SCGCQ01509632)
- Ventura: 4311 fault with NVMe enabled.(SCGCQ01519732)
- pl: backend PCIe: 4311 fault with NVMe enabled (part 2).(SCGCQ01522342)
- pl: backend PCIe: 4311 fault (part 3).(SCGCQ01571588)
- Ventura B0: Windows server 2016 OS may not detect all drives on OEM backplane in a mixed mode config.(SCGCQ01592762)
- Device block and unblock messages observed for the existing connected NVMe drives when new NVMe drive is inserted.(SCGCQ01615532)
- pl: backend PCIe: ED8D fault.(SCGCQ01628411)
- SGPIO SCLK Glitch and Low upon coming out of reset.(SCGCQ01697481)
- pl: NVMe: ED8D fault.(SCGCQ01698373)
- pl: backend PCIe: E984, E9A4, EF50, EF52 faults.(SCGCQ01294948)
- Task Management request of Abort Task to an NVMe device completes with failure status if the target of the Abort is not a currently active IO from the controller's point of view.(SCGCQ01334586)
- pl: NVMe: missing AccessStatus codes.(SCGCQ01352937)
- Doorbell handshake hangs when faulted.(SCGCQ01384089)
- PCI SIG Compliance Test Failure - Test 1_8 Virtual Channel.(SCGCQ01394426)
- The Avoid Duplicate Mid feature does not activate properly for expander attached SATA devices.(SCGCQ01405083)
- When disabling one phy of a port the other phys of the same port do not relink after reset..(SCGCQ01418575)
- 9405W-16i xml not available in Latest Release Order.(SCGCQ01429439)
- GoldenX: When no BIOS option is selected the images are 1MB too small.(SCGCQ01448015)
- Ventura: NVMe : Log Sense Command Executed for Information Exceptions Log Page has TSD field set to 0b.(SCGCQ01448752)
- pl: backend PCIe: link may fail to come up after link break.(SCGCQ01451278)
- (VSES) SES INQUIRY commands and storcli commands hang while getting adapter information.(SCGCQ01458388)
- pl: NVMe: issues related to port enable completion.(SCGCQ01464247)
- PL: Modify internal structures.(SCGCQ01487864)
- Intermittent Update firmware failed with M0 using EFI StorCLI.(SCGCQ01487866)
- Global HDD LED may not indicate IO activity for NVMe or SAS drives.(SCGCQ01489030)
- Code Unstable in Common_Main, Re definitions of Macro IOP_TIMED_CONDITION, consolidating them.(SCGCQ01489981)
- 0x7C41 Fault doing IOs and Task Managements on a mixed SAS/NVMe topology..(SCGCQ01494379)
- pl: SATA: port enable may time out on spinup failure.(SCGCQ01496842)
- IOP MCTP: Changes missing from a previous code change.(SCGCQ01497080)
- Fixing coverty defects 19848 & 19838.(SCGCQ01504066)
- Ventura: Slot LEDs on SGPIO based backplane may not blink.(SCGCQ01505392)
-.(SCGCQ01615484)
- PL: More than one ATA command at a time may be submitted to a SATA device.(SCGCQ01377242)
- Drive missing on power cycle.(SCGCQ01421447)
- Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated.(SCGCQ01450475)
- vSES Target: Allocation Length less than 16 Bytes for REPORT LUNS Command is not Handled Properly.(SCGCQ01451022)
- MCTP: Fault 0x265d while doing enclosure pull/push with OOB StoreLibIT when enabling AEN.(SCGCQ01631826)
- MCTP PCIe VDM: controller stops responding after sending over 1000 asynchronous events.(SCGCQ01742362)
- Ventura: NVMe Target: Non-Zero Value in TRACK SKEW FACTOR field of FORMAT DEVICE Mode Page.(SCGCQ01412908)
- (SATA Only) Function field in MPI error reply message for SCSI ATA Pass-through request is not correct..(SCGCQ01638248)
- Negotiated Link Speed for the vSES target is displayed as 'Unknown'..(SCGCQ01606720)
- Not all NVMe drives were discovered after server cold or warm boot.(SCGCQ01664963)
- Incorrect vSES Data for Page 0x02 After Storcli Start & Stop Locate Operations for certain NVME Backplanes..(SCGCQ01671177)
- VPD is not shown by lspci.(SCGCQ01687750)
- Not all NVMe drives discovered as part of hot plug operation.(SCGCQ01697329)

EnhancementRequests (40)
- Ventura: Remove VENTURA_PORTING from ARM Initialization/Utilities..(SCGCQ00922893)
- Ventura: Move firmware update copy process to main firmware to avoid PCE problems.(SCGCQ01230723)
- Ventura/Marlin: When the SPICO code fails checksum, Patch SPICO Signature and Checksum.(SCGCQ01240422)
- pl: NVMe: support for devices with large sector sizes.(SCGCQ01275066)
- MPI 2.6: Device side PCIe SRNS flag.(SCGCQ01276256)
- MPI 2.6: Add new firmware download type (CPLD IMAGE).(SCGCQ01305760)
- Ventura: Enclosure Mgmt optimizations and enhancements.(SCGCQ01328437)
- MPI 2.6: add NVMe SGL Data Block descriptor alignment flag.(SCGCQ01339864)
- Ventura B0:(UBM) Identifying a UBM Capable backplane.(SCGCQ01412194)
- To read the port Capabilities from backplane implementing UBM and to validate backplane configuration.(SCGCQ01412195)
- Enable I2C polling for drive presence detection in UBM backplanes with NVMe support..(SCGCQ01412198)
- Controlling Slot Locate/Fault LEDs in a backplane which implements UBM..(SCGCQ01412209)
- MPI 2.6: Add ControllerResetTO to PCIe Device Page 2.(SCGCQ01416498)
- MPI 2.6: Add new reason code to PCIE Device Status Change Event.(SCGCQ01416515)
- pl: NVMe: NVMe task management modifications.(SCGCQ01419083)
- Ventura: NVMe 1.3 Support: Firmware Update Granularity.(SCGCQ01430672)
- Ventura: NVMe 1.3 Support: Namespace Optimal IO Boundary.(SCGCQ01430674)
- Ventura: NVME 1.3 Support: Add new Status Codes to header files.(SCGCQ01434061)
- pl: NVMe: don't require a resource frame for some SCSI-NVMe translations.(SCGCQ01436612)
- pl: NVMe: SGL translation performance tweaks.(SCGCQ01440247)
- PL: Add firmware support for depopulation of SATA drives.(SCGCQ01445877)
- pl: NVMe: NVMe task management modifications (part 2).(SCGCQ01445903)
- Reduce time taken by host to initialize one SATA drive..(SCGCQ01448575)
- (SATA Only) Add support for SCSI Read Capacity command when drive is in spun down mode..(SCGCQ01448576)
- MPI 2.6: PCIe Device Page 2 reporting Namespace Optimal IO Boundary(NOIOB) for NVMe devices.(SCGCQ01449138)
- (SATA Only) Add support for NDOB bit in translation of SCSI Write Same Command to SATA drives.(SCGCQ01454125)
- Ventura: Re-order pl dbg to put most useful, less verbose prints first.(SCGCQ01454612)
- Ventura/Marlin: Change to ARM site licenses.(SCGCQ01461714)
- Ventura: Change iopiDiagCmdReadMem() to not print rows of zeros.(SCGCQ01462690)
- Ventura: Modify plDiagCmdShowRegister() to skip printing of dwords of 0 when regSize == 4..(SCGCQ01464914)
- PL: Add NVDATA option to gracefully handle invalid BP Type configurations.(SCGCQ01464951)
- pl: backend PCIe: reduce firmware initiated PCIe transaction wait time.(SCGCQ01465016)
- pl: NVMe: add debug print to the NVMe encapsulated failure path.(SCGCQ01487366)
- Ventura: Remove VENTURA_PORTING from Makefiles and headers.(SCGCQ00922883)
- MPI 2.6: Add Aero PCI Device IDs.(SCGCQ01373008)
- pl: NVMe: IO breakup structure modification.(SCGCQ01431067)
- Skipping additional reserved registers when printing pl dbg trace.(SCGCQ01468138)
- PL: Use Sense Data from SATA Log Page 10 when querying Log Page 10.(SCGCQ01459375)
- Reduced amount of data in pl dbg trace output.(SCGCQ01394882)
- Ventura/Marlin: Add support for Winbond 256Mbit SPI FLASH.(SCGCQ01449325)

CSETActivities (88)
- PL : Drives may not spin up due to bug in spin up path found during code walk through.(SCGCQ01385320 port of SCGCQ01358138)
- PL: Change avoid duplicate mid LUN reset option to abort task set.(SCGCQ01429867 port of SCGCQ01429655)
- PL: More than one ATA command at a time may be submitted to a SATA device(SCGCQ01435779 port of SCGCQ01377242)
- Ventura VSES: Unique id and serial number for virtual SES to support microsoft storage spaces direct(SCGCQ01436959 port of SCGCQ01404241)
- Ventura vSES: SAS and SATA direct attached devices are not getting associated to vSES in Windows Storage Spaces Direct..(SCGCQ01442629 port of SCGCQ01438119)
- Ventura B0: Missing signing supported firmware image in RO(SCGCQ01443281 port of SCGCQ01392675)
- PCI SIG Compliance Test Failure - Test 1_8 Virtual Channel(SCGCQ01443732 port of SCGCQ01394426)
- Direct attached VSES Enclosure validation may fail with certain OS tools(SCGCQ01451190 port of SCGCQ01445053)
- MCTP I2C: I2C communication is lost between BMC and controller(SCGCQ01455876 port of SCGCQ01385782)
- PL : PWR_GRANT is not issued upon PWR_REQ from SPL2 drive(SCGCQ01458074 port of SCGCQ01330984)
- PL : PL fault 0x7C72 is hit during discovery when disabling and enabling all the PHYs connected to legacy SAS drives(SCGCQ01458664 port of SCGCQ01455200)
- Limit printing a SGL chain to only 15 elements(SCGCQ01468156 port of SCGCQ01180961)
- PL: Add Code to Correctly Determine Mid for Rx Context Non-automated Interrupts(SCGCQ01479502 port of SCGCQ01472512)
- IOP: 0x265D Fault Observed on Cold Boot of Customer Server with Misconfigured Controller NVDATA(SCGCQ01505077 port of SCGCQ01473138)
- PL SATL: SCSI Write Buffer Mode 7 Command Incorrectly Failed by Firmware(SCGCQ01505080 port of SCGCQ01498114)
- IOP: I2C MCTP: Slave response mode fails to return response to I2C read(SCGCQ01508067 port of SCGCQ01506883)
- Fault State (0x265d) is Observed While Connecting an Enclosure with Fully Populated SATA Drives(SCGCQ01514262 port of SCGCQ00856085)
- pl: backend PCIe: workaround timer may trigger after too short of an interval(SCGCQ01519802 port of SCGCQ01518343)
- pl: NVMe: rapid device removal/add with a specific vendor backplane(SCGCQ01522511 port of SCGCQ01487423)
- pl: backend PCIe: 4311 fault with NVMe enabled (part 2(SCGCQ01523550 port of SCGCQ01523531)
- pl: backend PCIe: non-NVMe endpoint not cleaned up on removal(SCGCQ01529383 port of SCGCQ01516968)
- PL: Fault 0x5862 seen when host buffer size is smaller than allocation length in CDB(SCGCQ01529512 port of SCGCQ01509770)
- PL Fault 0000ecdd LR 01403837 during initial discovery(SCGCQ01539840 port of SCGCQ01531770)
- pl: backend PCIe: switch attached discovery takes too long(SCGCQ01556426 port of SCGCQ01522343)
- (SATA Only) SCSI Unmap command to some SATA drives are timing out(SCGCQ01621120 port of SCGCQ01539572)
- (SATA only) Self-test offline immediate status received from drive is not populated to SCSI log sense command(SCGCQ01713180 port of SCGCQ01681441)
- PL Discovery: After Port Down, Expander Is Not Removed and Firmware Retries SMP Indefinitely(SCGCQ01411982 port of SCGCQ01295414)
- MCTP I2C: I2C traces shows partial response/zero’ed out packet response from the HBA(SCGCQ01421231 port of SCGCQ01394463)
- pl: backend PCIe: ECE4 fault(SCGCQ01434062 port of SCGCQ01312345)
- 0x6004 Fault during TM injection while running IO to Sata SSDs(SCGCQ01437146 port of SCGCQ01416481)
- When disabling one phy of a port the other phys of the same port do not relink after reset(SCGCQ01439512 port of SCGCQ01418575)
- Ventura SBR: Changes to PLL reset requirements cause lock failure on some boards(SCGCQ01440390 port of SCGCQ01373888)
- Customer experiences 5-7 % performance drop on 24 direct connected SAS SSD R10/R6 setup(SCGCQ01442980 port of SCGCQ01417361)
- PL: Change avoid duplicate mid LUN reset option to abort task set(SCGCQ01444118 port of SCGCQ01429655)
- Ventura vSES: SAS and SATA direct attached devices are not getting associated to vSES in Windows Storage Spaces Direct(SCGCQ01451982 port of SCGCQ01438119)
- pl: port enable may fail to complete if an OEM backplane is attached(SCGCQ01467289 port of SCGCQ01455680)
- PL owned mids are not getting released even after removing drives (SATA(SCGCQ01512617 port of SCGCQ00846818)
- Ventura hardware does not like the IOP enable method used here(SCGCQ01519729 port of SCGCQ01514880)
- (SATA Only) LBPRZ bit in VPD page 0xB2 is never set for SATA devices(SCGCQ01524353 port of SCGCQ01516277)
- Controller is not detecting in the storelib, after changing the mode from "set mode oob" command(SCGCQ01530310 port of SCGCQ01494018)
- pl: NVMe: EC0D fault(SCGCQ01533267 port of SCGCQ01530402)
- pl: backend PCIe: link workaround not sufficiently coordinated with SAS link establishment(SCGCQ01556893 port of SCGCQ01540226)
- To implement the CHANGE_DETECT GPIO feature for the UBM backplanes(SCGCQ01628440 port of SCGCQ01507506)
- The PCIe reset to be handled properly for the Change detect feature(SCGCQ01628452 port of SCGCQ01623437)
- PL: Change to Customer Specific SMP Response Report Manufacturer(SCGCQ01639906 port of SCGCQ01505468)
- Not to do all drives reset at the start of the boot up on each port of the controller(SCGCQ01681401 port of SCGCQ01670965)
- PL : performance drop of nearly 40% in sequential write and seqential Reads(SCGCQ01341898 port of SCGCQ01333993)
- pl: NVMe: memory leak in Verify (10/12/16) command translation(SCGCQ01434063 port of SCGCQ01429659)
- 9405W-16i xml not available in Latest Release Order(SCGCQ01434399 port of SCGCQ01429439)
- Customer experiences 5-7 % performance drop on 24 direct connected SAS SSD R10/R6 setup..(SCGCQ01442976 port of SCGCQ01417361)
- Ventura/Marlin: NMI due to Host-side PCE credit starvation when there are simultaneous accesses to MSIX table and Generic Messaging Queue.(SCGCQ01445831 port of SCGCQ01418686)
- Direct attached VSES Enclosure validation may fail with certain OS tools.(SCGCQ01451191 port of SCGCQ01445053)
- PL: EnclMgmt: Move ownership of SES Page 0x0A slot mapping from devices to PHYs.(SCGCQ01458359 port of SCGCQ00870423)
- VSES Target not added in host if event replay slot ordering is enabled(SCGCQ01474945 port of SCGCQ01471601)
- BMC emulator on Ventura failed with Storlib discovery(SCGCQ01488146 port of SCGCQ01410607)
- Enhance SAS3 FW to pass PCIeCV PCIe Configuration Validation TD_1_28 Vital Product Data Capability Test(SCGCQ01499168 port of  SCGCQ00878239)
- Ventura VSES: Unique id and serial number for virtual SES to support microsoft storage spaces direct(SCGCQ01500100 port of SCGCQ01404241)
- pl: backend PCIe: 4311 fault with NVMe enabled(SCGCQ01520574 port of SCGCQ01514521)
- (SATA Only) Security Protocol In command complete without data transfer for allocation length not a multiple of 512(SCGCQ01524638 port of SCGCQ01275335)
- pl: NVMe: PCIe reconfiguration may occur during NVMe controller reset(SCGCQ01527219 port of SCGCQ01526236)
- Fixing the issues during bringup of the universal backplane(SCGCQ01599610 port of SCGCQ01522148)
- Ventura B0: Fault 0x4311 while running HBA phys off/on & drive hard reset(SCGCQ01698231 port of SCGCQ01619417)
- pl: Mode Select translation transfer length validation(SCGCQ01439510 port of SCGCQ01435884)
- Ventura: Misc tri-mode backplane mgmt detection fixes and Slot status update changes(SCGCQ01441077 port of SCGCQ01428718)
- vSES Target: Incorrect Sense Data for REQUEST SENSE Command(SCGCQ01500101 port of SCGCQ01451678)
- Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01530305 port of SCGCQ01450475)
- PL: Port Glitch on Direct Attached SATA drives,lead IO stop/File system become read only(SCGCQ01615056 port of SCGCQ01572062)
- Ventura: NVMe Target: Non-Zero Value in TRACK SKEW FACTOR field of FORMAT DEVICE Mode Page(SCGCQ01444677 port of SCGCQ01412908)
- pl: NVMe: EC26 fault(SCGCQ01453726 port of SCGCQ01451332)
- (VSES) SES INQUIRY commands and storcli commands hang while getting adapter information(SCGCQ01463523 port of SCGCQ01458388)
- Ventura vSES: Direct attached NVME drives are not getting associated with vSES in Microsoft Storage Spaces Direct(SCGCQ01502143 port of SCGCQ01478170)
- To fix issues for back plane configuration validation and LED control for the UBM backplane(SCGCQ01599611 port of SCGCQ01533852)
- IO starvation and performance degradation when using dma Q masking feature(SCGCQ01630921 port of SCGCQ01505074)
- ExtManPage40 FeatureFlags bit definition is missing in 9405W-16i partinal NVDATA(SCGCQ01684232 port of SCGCQ01639482)
- PL: Chassis Slot Valid Flag is Incorrectly Cleared in Enclosure Page 0(SCGCQ01715875 port of SCGCQ01715509)
- PL: Revised "Avoid Duplicate Mid" Feature Code Could Incorrectly Allow IO to Start Through PL Firmware Path(SCGCQ01749480 port of SCGCQ01520524)
- Avoid releasing I2C bus when I2C operation(Read/Write) in progress(SCGCQ01752794 port of SCGCQ01721931)
- Ventura/Marlin: NMI due to Host-side PCE credit starvation when there are simultaneous accesses to MSIX table and Generic Messaging Queue(SCGCQ01448302 port of SCGCQ01418686)
- To fix the phy to slot mapping issue for the UBM backplane(SCGCQ01599612 port of SCGCQ01542497)
- Ventura B0: Slot status LED updates to certain slots on NVMe backplane may fail(SCGCQ01599616 port of SCGCQ01574224)
- Get VDM Support command does not have VendorID and VendorAddInfo fields properly populated(SCGCQ01456658 port of SCGCQ01450475)
- To fix the LED issue, VPP data and moving to change detect poll state( SCGCQ01599614 port of SCGCQ01576165)
- Change detect feature support on UBM supported back plane(SCGCQ01628442 port of SCGCQ01605371)
- Ventura: Disable drive presence based PCIe RefClk and PERST control for OEM ID66 backplane(SCGCQ01676884 port of SCGCQ01670180)
- Hot plugged NVMe drive fails to link up on OEM backplanes with ISTWI drive presence polling enabled(SCGCQ01464097 port of SCGCQ01463496)
- Ventura VSES: Incorrect data in diagnostic page 0xA when drive is missing but not yet removed(SCGCQ01502175 port of SCGCQ01472941)
 - pl: backend PCIe: 4311 fault (part 3)(SCGCQ01574923 port of SCGCQ01537791)
- The x4 link configuration was not detected by UBM module(SCGCQ01747034 port of SCGCQ01735485)


Version 5.01-07-1-1
---------------
Contains:
    BIOS            Firmware      UEFI Driver
    9.9.0.0         5.125.2.0     5.0.0.0


Version 2.08 -  New Function Only/No fixes
---------------
Contains:
  BIOS         Firmware      UEFI Driver
  9.01.03.00   01.125.16.00  01.04.00.00





Lenovo Data Center Group Linux OS Support Home Page
linux.lenovo.com

© 2018-2019 Lenovo. All rights reserved