IBM Flex System FC3172 2-port 8Gb FC Adapter	Device Product Guide	Part Number: 69Y1938 Feature Code: A1BQ
PCIe Sub Vendor ID: 0x1077 PCIe Sub Device ID: 0x0175

Firmware	Firmware Name	Version
Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package	4.11af-8g-flex.f
Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package	4.11af-8g-flex.f
Drivers	Driver Name	Discreate Package Download	Version
qlgc-qla2xxx kernel driver	kmod-qlgc-qla2xxx- 10.01.00.43.08.0_k-2.rhel8u0.x86_64.rpm	10.01.00.43.08.0_k
qlgc-qla2xxx kernel driver	kmod-qlgc-qla2xxx- 10.01.00.43.08.0_k-2.rhel8u0.x86_64.rpm	10.01.00.43.08.0_k

Firmware	Firmware Name	Version
Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package	4.11af-8g-flex.f
Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package	4.11af-8g-flex.f
Drivers	Driver Name	Discreate Package Download	Version
qlgc-qla2xxx kernel driver	kmod-qlgc-qla2xxx- 10.01.00.43.08.0_k-2.rhel8u0.x86_64.rpm	10.01.00.43.08.0_k
qlgc-qla2xxx kernel driver	kmod-qlgc-qla2xxx- 10.01.00.43.08.0_k-2.rhel8u0.x86_64.rpm	10.01.00.43.08.0_k

Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package

Change History - 4.11af

Package Version:  4.11af
05/17/2019
===========================================================================
Versions:
  * BIOS      version  2.14 (BOFM) 
  * FCode     version  3.23 (ibm)
  * UEFI      version  6.15 (signed)
  * Firmware  version  8.08.01
  
  FlasUtil    version  1.89
  VPD         version  10.01a
  Efiutil     version  3.17

========================================================================================
03/23/2019
===========================================================================
Versions:
  * BIOS      version  2.14 (BOFM) 
  * FCode     version  3.23 (ibm)
  * UEFI      version  6.15
  * Firmware  version  8.08.01
  
  FlasUtil    version  1.89
  VPD         version  10.01a
  Efiutil     version  3.17

========================================================================================
Change History - 4.11af


Package Version 4.11af
08/21/2018

Firmware

Version     I25A7411.BIN
BIOS        2.14 (BOFM)
EFI         6.14 signed
FCODE       3.23
FIRMWARE    8.08.01


Change History - 
========================================================================================

Package Version 4.11af
04/13/2018

Firmware

Version     I25A1411.BIN
BIOS        2.14 (BOFM)
EFI         6.14 signed
FCODE       3.23
FIRMWARE    8.07.00


FCode
version 3.23 08/29/14
* Fix bug in fp.fth. Add missing SUN methods: read-block-ext64 & rw-blocks64.
  These methods add 64-bit LBA support. This bug only present in SUN qlc Fcode

UEFI Driver:
6.14

* Fixed formatting problems in the HII WWN Database menu. The 
  formatting problems only exist on older System X servers. 
  (ER140666) 
* Microsoft signed driver.

6.13

* Updated HII to support System X and AMI based servers. (ER137721)
* Changed HII WWN Database behavior. The WWPN/LUN list is now 
  created when the driver starts. This allows driver to run on AMI
  based servers. (ER137721)
* Updated a few HII strings. (ER137721)
* Fixed bug in UCM support.  Callback flag now used to determine browser
  mode or UCM mode. (ER137721)
* UCM WWN field is now a string.  UCM did not properly support UINT64.
  (ER137721)

BIOS
Version 2.14 
* Removed Beta banner

Version 2.14 Beta 3
* Added check invalid LUN when configuring boot target (ER105664).

Version 2.14 Beta 2
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q 

Version 2.14 Beta 1
* Fix bug that cause external looback to fail (er71773).                    
   Added support for Hilda  
========================================================================================

Package Version 3.12af
03/18/2015

Firmware

Version     I25A7312.BIN
BIOS        2.14 (BOFM)
EFI         6.12 
FCODE       3.22
FIRMWARE    7.04.00


* Removed port number from HII formset title. This fixes a UCM parsing
  issue. (ER134560).
* Fix issue in retry? method. It was not retring Queue Full 28 status.
* Fix issue in set-flt-ofs method. With no EFI image, got FLT Locator not found.
* Change all Copyright messages from 2013 to 2014. 
* Fix login-device to Logout-device when login timesout(sub-cmd 4).
* Created NPort-Header buffer, nph-buf. Allows skipping invalid NPHs.
* Added Multiflash Version display in show-settings.

========================================================================================

Package Version 3.11af.e
Only change with ".e" is with XML file changes.
07/07/2014


========================================================================================



Version 3.11af.a
03/30/2014
========================================================================================
Firmware

Version     I25A9311.BIN
BIOS        2.14 (BOFM)
EFI         6.08 
FCODE       3.21
FIRMWARE    7.02.00

* Added fix to hide or list HII elements selectively. (ER116233)
* Added check invalid LUN when configuring boot target (ER105664).
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q 


Previous versions:

Version :   7.01.00
Date    :   01/09/2014

Version :   7.00.00
Date    :   07/22/2013

Version :   5.10.00
Date    :   06/12/2013
* Added check invalid LUN when configuring boot target 
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q 
* Fix issue that cause external looback to fail (er71773).                    
   Added support for Hilda    

Version :   5.07.02
Date    :   10/23/2012
 * Fix Task Management IOCB type 14h completion with dma error status.
 * Fix an issue where HBA would constantly ISP reset if switch in transparent mode but no upstream switch
	
Version :   5.07.00
Date	:	5/17/2012
 * New Feature: Firmware sends Report ID Acquired IOCB Type 32h upon
   Flogi failure.
 * New Feature: Firmware reports NportHandle, WWPN and WWNN of remote port in Report ID 
   Acquired IOCB Type 32h for N2N connection topology. 
 * Fix firmware not logging out SNS port (PID=0xFFFFFc) while processing 
   implicit Logout all request
 * EP Device Only: Fix advertised BB_Credits not increasing with additional 
   receive credits option set. 
 * Target Mode: Fix firmware fatal error seen while aborting an exchange.  
 * Fix firmware failing request to disable multiple virtual ports using iocb
   type 30h. 
 * Fix Loop port bypass (40h) and loop port enable (41h) mailbox commands 
   not working correctly. 
 * FC-VI only: Fix disconnect request iocb timeout. 
 * T10 Only: Fix firmware reporting DIF errors while running multi sequence, 
   T10-DIF enabled IO�s with protection mode set to DIF- Remove.
 * Fix firmware fatal error while running T10-DIF enabled IO�s with 
   protection mode set to DIF-Remove. 
 * Fix incorrect reporting of discarded and dropped frame count in mailbox 
   command 6Dh.    
 * Add support for programming page and payload length fields in TPRLO response 
   frame. 
		
Version :	5.06.05
Date   	:	4/26/2012
 --Initial Release

========================================================================================
UEFI


Version :   2.47
Date	:	05/07/2013
 * Modified Controller name string of device as suggested by Lenovo  [ER 102498]
 * Add support for 83xx card [ER 88039]

Version :   2.45
Date	:	10/23/2012
 * Updates for driver listing on Driver health protocol support
 * Added support for Lenovo Config Patterns Compliance

Version :   2.42
Date    :   6/22/2012
 * Add fix for Driver Health Protocol

Version :	2.40
Date    : 	4/26/2012
 --Initial Release

========================================================================================
BIOS

Version :   2.14
Date    :   05/07/2013
 *Added check invalid LUN when configuring boot target (ER105664).              
 *Added support for P3P
 *Fix issue that cause external looback to fail (er71773)


Version :   2.13
Date    :   7/31/2012
 *Added code code to check for non-EDC HBA's in CTRL-Q utility.              
 *Fixed bug in EDC update code
							
Version :	2.11
Date    :	4/26/2012
 --Initial Release
	  
									 
========================================================================================					 
FCODE

Version :   3.20
Date    :   05/07/2013
 * ER102374: Display Product-ID string in VPD area during initial selection.
 * ER94574: Fix stack bug in .adatper-info, found in blade hotplug test by efcode


Version :   3.19
Date    :   7/31/2012
 * Add check for MBAR2 (Multi-Queue memory) and create reg property if it exists.
 * Make validate-nvram silent. Print messages only if debug-flash?(x1000) is set.
 * Added dynamic sizing of the BAR registers at probe-time for reg property.
 * Remove dis-exp (disable-exprom) in ena-reg-acc. Causes problem on SPARC T3-1B.
 * Fix bugs in search of Card-Type-Lists for SSDID when flashing w/find-ilt-code.
 * Change oem property to QLogic or Oracle, and manufacture property to QLogic.
 * Added SSDID check to set-edc-config. 
 * Stripped ISP2400 & SUN specific code using #ifdefs to reduce Lenovo size by .5KB
 * Added EDC FW area in Flash and added write-sfp and read-sfp mailbox commands
 * Added set-edc-config, edc-update?, and edc-present! words to nvram.fth.(Lenovo)
 * Added check-edc-load and load-edc-fw words to init-isp.fth..

Version	:	3.16 
Date	:	4/26/2012
 --Initial Release

========================================================================================

Lenovo Data Center Group Linux OS Support Home Page

linux.lenovo.com

Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package

Qlogic FC Device Drivers for RHEL8 (For Rhel)