Lenovo Flex System FC3172 2-port 8Gb FC Multiboot Update Package

Change History - 4.11af
Package Version: 4.11af
05/17/2019
===========================================================================
Versions:
* BIOS version 2.14 (BOFM)
* FCode version 3.23 (ibm)
* UEFI version 6.15 (signed)
* Firmware version 8.08.01
FlasUtil version 1.89
VPD version 10.01a
Efiutil version 3.17
========================================================================================
03/23/2019
===========================================================================
Versions:
* BIOS version 2.14 (BOFM)
* FCode version 3.23 (ibm)
* UEFI version 6.15
* Firmware version 8.08.01
FlasUtil version 1.89
VPD version 10.01a
Efiutil version 3.17
========================================================================================
Change History - 4.11af
Package Version 4.11af
08/21/2018
Firmware
Version I25A7411.BIN
BIOS 2.14 (BOFM)
EFI 6.14 signed
FCODE 3.23
FIRMWARE 8.08.01
Change History -
========================================================================================
Package Version 4.11af
04/13/2018
Firmware
Version I25A1411.BIN
BIOS 2.14 (BOFM)
EFI 6.14 signed
FCODE 3.23
FIRMWARE 8.07.00
FCode
version 3.23 08/29/14
* Fix bug in fp.fth. Add missing SUN methods: read-block-ext64 & rw-blocks64.
These methods add 64-bit LBA support. This bug only present in SUN qlc Fcode
UEFI Driver:
6.14
* Fixed formatting problems in the HII WWN Database menu. The
formatting problems only exist on older System X servers.
(ER140666)
* Microsoft signed driver.
6.13
* Updated HII to support System X and AMI based servers. (ER137721)
* Changed HII WWN Database behavior. The WWPN/LUN list is now
created when the driver starts. This allows driver to run on AMI
based servers. (ER137721)
* Updated a few HII strings. (ER137721)
* Fixed bug in UCM support. Callback flag now used to determine browser
mode or UCM mode. (ER137721)
* UCM WWN field is now a string. UCM did not properly support UINT64.
(ER137721)
BIOS
Version 2.14
* Removed Beta banner
Version 2.14 Beta 3
* Added check invalid LUN when configuring boot target (ER105664).
Version 2.14 Beta 2
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q
Version 2.14 Beta 1
* Fix bug that cause external looback to fail (er71773).
Added support for Hilda
========================================================================================
Package Version 3.12af
03/18/2015
Firmware
Version I25A7312.BIN
BIOS 2.14 (BOFM)
EFI 6.12
FCODE 3.22
FIRMWARE 7.04.00
* Removed port number from HII formset title. This fixes a UCM parsing
issue. (ER134560).
* Fix issue in retry? method. It was not retring Queue Full 28 status.
* Fix issue in set-flt-ofs method. With no EFI image, got FLT Locator not found.
* Change all Copyright messages from 2013 to 2014.
* Fix login-device to Logout-device when login timesout(sub-cmd 4).
* Created NPort-Header buffer, nph-buf. Allows skipping invalid NPHs.
* Added Multiflash Version display in show-settings.
========================================================================================
Package Version 3.11af.e
Only change with ".e" is with XML file changes.
07/07/2014
========================================================================================
Version 3.11af.a
03/30/2014
========================================================================================
Firmware
Version I25A9311.BIN
BIOS 2.14 (BOFM)
EFI 6.08
FCODE 3.21
FIRMWARE 7.02.00
* Added fix to hide or list HII elements selectively. (ER116233)
* Added check invalid LUN when configuring boot target (ER105664).
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q
Previous versions:
Version : 7.01.00
Date : 01/09/2014
Version : 7.00.00
Date : 07/22/2013
Version : 5.10.00
Date : 06/12/2013
* Added check invalid LUN when configuring boot target
* Added support for P3P
* Removed Execution Throttle Option From CTRL_Q
* Fix issue that cause external looback to fail (er71773).
Added support for Hilda
Version : 5.07.02
Date : 10/23/2012
* Fix Task Management IOCB type 14h completion with dma error status.
* Fix an issue where HBA would constantly ISP reset if switch in transparent mode but no upstream switch
Version : 5.07.00
Date : 5/17/2012
* New Feature: Firmware sends Report ID Acquired IOCB Type 32h upon
Flogi failure.
* New Feature: Firmware reports NportHandle, WWPN and WWNN of remote port in Report ID
Acquired IOCB Type 32h for N2N connection topology.
* Fix firmware not logging out SNS port (PID=0xFFFFFc) while processing
implicit Logout all request
* EP Device Only: Fix advertised BB_Credits not increasing with additional
receive credits option set.
* Target Mode: Fix firmware fatal error seen while aborting an exchange.
* Fix firmware failing request to disable multiple virtual ports using iocb
type 30h.
* Fix Loop port bypass (40h) and loop port enable (41h) mailbox commands
not working correctly.
* FC-VI only: Fix disconnect request iocb timeout.
* T10 Only: Fix firmware reporting DIF errors while running multi sequence,
T10-DIF enabled IO’s with protection mode set to DIF- Remove.
* Fix firmware fatal error while running T10-DIF enabled IO’s with
protection mode set to DIF-Remove.
* Fix incorrect reporting of discarded and dropped frame count in mailbox
command 6Dh.
* Add support for programming page and payload length fields in TPRLO response
frame.
Version : 5.06.05
Date : 4/26/2012
--Initial Release
========================================================================================
UEFI
Version : 2.47
Date : 05/07/2013
* Modified Controller name string of device as suggested by Lenovo [ER 102498]
* Add support for 83xx card [ER 88039]
Version : 2.45
Date : 10/23/2012
* Updates for driver listing on Driver health protocol support
* Added support for Lenovo Config Patterns Compliance
Version : 2.42
Date : 6/22/2012
* Add fix for Driver Health Protocol
Version : 2.40
Date : 4/26/2012
--Initial Release
========================================================================================
BIOS
Version : 2.14
Date : 05/07/2013
*Added check invalid LUN when configuring boot target (ER105664).
*Added support for P3P
*Fix issue that cause external looback to fail (er71773)
Version : 2.13
Date : 7/31/2012
*Added code code to check for non-EDC HBA's in CTRL-Q utility.
*Fixed bug in EDC update code
Version : 2.11
Date : 4/26/2012
--Initial Release
========================================================================================
FCODE
Version : 3.20
Date : 05/07/2013
* ER102374: Display Product-ID string in VPD area during initial selection.
* ER94574: Fix stack bug in .adatper-info, found in blade hotplug test by efcode
Version : 3.19
Date : 7/31/2012
* Add check for MBAR2 (Multi-Queue memory) and create reg property if it exists.
* Make validate-nvram silent. Print messages only if debug-flash?(x1000) is set.
* Added dynamic sizing of the BAR registers at probe-time for reg property.
* Remove dis-exp (disable-exprom) in ena-reg-acc. Causes problem on SPARC T3-1B.
* Fix bugs in search of Card-Type-Lists for SSDID when flashing w/find-ilt-code.
* Change oem property to QLogic or Oracle, and manufacture property to QLogic.
* Added SSDID check to set-edc-config.
* Stripped ISP2400 & SUN specific code using #ifdefs to reduce Lenovo size by .5KB
* Added EDC FW area in Flash and added write-sfp and read-sfp mailbox commands
* Added set-edc-config, edc-update?, and edc-present! words to nvram.fth.(Lenovo)
* Added check-edc-load and load-edc-fw words to init-isp.fth..
Version : 3.16
Date : 4/26/2012
--Initial Release
========================================================================================
