# changelog

author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137v
changelog:
  - Backport upstream patches  (Severity:Medium)
  - Add PHY reset workaround in change MTU path for 5717/19/20  (Severity:Medium)
  - Update the copyright (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137w
changelog:
  - Add SLES 15 support  (Severity:Medium)
  - Add RHEL 7.5 support (Severity:Medium)
  - Fix RHEL 6.4 compilation (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137x
changelog:
  - Add Ubuntu 18.04 support  (Severity:Minor)
  - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor)
  - Avoid usleep_range() with holding spin lock (Severity:Minor)


author: sbahling@suse.com
changelog:
  - Initial SUSE PLDP build of automatic source pullfrom e1000.sf.net
    Pulled from https://netcologne.dl.sourceforge.net/project/e1000//i40e%20stable/2.4.10/i40e-2.4.10.tar.gz
  - Release README:
    Upstream Changelog for i40e 2.4.10
    Add support for RHEL 7.5
    Fix synchronization issue with simultaneous resets on multiple ports


author: lance.ortiz@suse.com
changelog:
  - initial commit for i40e 2.6.12. includes retpoline support and
    udpated spec file to work with SLE15.


author: sbahling@suse.com
changelog:
  - Remove embedded i40iw module
  - Add Requires: intel-i40iw-kmp to preamble
  - Add Requires(pre): intel-i40iw-kmp to preamble to ensure i40iw
    gets installed first (both Requires lines required!)


author: lance.ortiz@suse.com
changelog:
  -New version intel-i40e-2.7.29
  - also added the 12 sp2 version of i40iw since that version won't
  - build without it.  Working on spec file to cover all versions


author: Broadcom Build Environment
changelog:
  -Added Linux SRIOV support
  -Added iSCSI & FCoE HBA support for specific HP adapters and devices
  -Added VC4.10 support
  -Added BCV support
  -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence.
  -Allow UDP tunneling offload
  -Enable IPGRE RSS by default
  -Support different GRE RSS modes.


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support.
  -Add RH6.5 support.
  -FC-TAPE - Host responds early to a requested resend delay - Linux (70101)
  -SLES11 MEZ75 IO halt with Nexus reboot tests (70728)
  -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187)
  -KVM gso and gro are not working on hv and vm as expected (70506)
  -SRIOV mtu toggle failure (70530)
  -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531)
  -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426)
  -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263)
  -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427)
  -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690)
  -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627)
  -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456)


author: QLogic Build Environment 7.12.37.1
changelog:
  - added RH5.11 support.
  - added RH6.6 & RH6.7 support.
  - added RH7.0 & RH7.1 support.
  - added SLES11-SP4 & SLES12 support.
  - added VLAN filtering offload support.
  - added Debian GNU/Linux 7 (wheezy) support.
  - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071).
  - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309).
  - RH7.x:  Tunneling offload is not enabled (79269).
  - self test fails on 20G adapter (79295).
  - VF interface vlan-filtering stopped working (79365).
  - Fail to force link speed other than 20G in KR2 (77841).
  - Incorrect asymmetric flow-control behavior (75504).
  - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590).
  - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]).
  - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded.
  - UDP packets cannot pass to the upper application (5709).
  - Out of memory issue when the adapter is reset (5709).
  - iSCSI offload: Driver displaying incorrect remote port (77842).
  - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704).


author: QLogic Cavium Build environment
changelog:
  - Version 8.18.18.0
  - Added missing support to configure 1G speed via ethtool
  - Fixed calculation of number of ooo rx buffers and limit to 16K

  - Version 8.18.17.0-1
  - iWARP - Handle flush completion on unaligned ll2 connection
  - Add dp_module, dp_level as modparams
  - Add Kconfig file for upstream builds

  - Version 8.18.16.0-1
  - Fix missing return error code check on call to qedi_setup_int
  - Modify different module params
  - Add log message in the driver unload path
  - Fail all non-timesync related ioctls

  - Version 8.18.15.0-1
  - Added wwpn and wwnn to the FCoE dev-info
  - Validate chap and mutual chap auth correctly

  - Version 8.18.14.0-1
  - Fix error handling flow in TX path
  - Fix error handling flow in RX path
  - Implement get_protocol_tlv_data callback


author: QLogic Corp <support@qlogic.com> 10.01.00.43.15.1-k-1
changelog:
  - 10.01.00.34.xx.y-k HM 12/17/2018
  - extras: Clean up build script for FC-NVMe install directive
  - qla2xxx: Add fix for N2N topology.
  - qla2xxx: Secure flash update support for ISP28XX.
  - qla2xxx: Restore WWPN of Physical Port for fabric configuration only for loop down.
  - qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary
  - qla2xxx: Initialize port speed to avoid setting lower speed

  - 10.01.00.33.xx.y-k HM 12/10/2018
  - extras: Silence diff related to nvme scripts with driver install script

  - 10.01.00.32.xx.y-k HM 12/07/2018
  - extras: update FC-NVMe boot script to use single TRADDR

  - 10.01.00.31.xx.y-k HM 12/04/2018
  - 10.01.00.30.xx.y-k SC 11/28/2018
  - qla2xxx: Fix for call trace being seen on reboot
  - Revert "qla2xxx: unable to discover NVME target."

  - 10.01.00.29.xx.y-k HM 11/21/2018
  - qla2xxx: Look for updated FC-NVME enable BIT to enable FC-NVME

  - 10.01.00.28.xx.y-k HM 11/21/2018
  - qla2xxx: Fix for call trace being seen on reboot

  - 10.01.00.27.xx.y-k HM 11/19/2018
  - qla2xxx: Fix issue reading primary region for ISP27xx/28xx
  - qla2xxx: Remove hardcoded OS value for SPECTER flags
  - qla2xxx: fix BUS Reset
  - qla2xxx: Correctly retrieve and interpret active flash regions for 27XX/28XX

  - 10.01.00.26.xx.y-k HM 11/05/2018
  - qla2xxx: fix stale mem access on unload. v2
  - Revert "qla2xxx: fix stale mem access on unload."
  - extras: Add capability to start system service
  - qla2xxx: fix stale mem access on unload.
  - qla2xxx: reduce duplicate code.
  - qla2xxx: Handle the fail case when fail to allocate memory for CT req and rsp.
  - qla2xxx: Change SRB allocation flag to ATOMIC to avoid sleeping in IRQ context.

  - 10.01.00.25.xx.x-k HM 10/20/2018
  - extras: Updated Build script for FC-NVMe Discovery
  - extras: Add Auto-connect scripts for FC-NVMe
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect
  - qla2xxx: Fix unload when NVMe devices are configured
  - qla2xxx: performance enhancement for ISP 28XX Target mode.
  - qla2xxx: tweak error code for bsg_request.
  - qla2xxx: reject garble setting for speed and qlini_mode
  - qla2xxx: performance enhancement for nvme
  - qla2xxx: Send Marker for each QPair.
  - qla2xxx: move marker request behind qpair

  - 10.01.00.24.xx.x-k HM 10/15/2018
  - qla2xxx: Correctly report max/min supported speeds for Mach adapter
  - qla2xxx: Fix flash pri/sec image selection bug
  - qla2xxx: Add 28xx flash primary/secondary refreshing
  - qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  - qla2xxx: Fix Use after free case while issuing Async TM command
  - qla2xxx: no MB IOCB during chip down
  - qla2xxx: Fix message to indicated Vectors used by driver
  - scsi: qla2xxx: don't allow negative thresholds
  - scsi: qla2xxx: Fix comment in MODULE_PARM_DESC in qla2xxx
  - scsi: qla2xxx: Remove set but not used variable 'ptr_dma'
  - scsi: qla2xxx: fix typo "CT-PASSTRHU" -> "CT-PASSTHRU"
  - qla2xxx: move error message behind error case.
  - scsi: qla2xxx: Add debug knob for user control workload

  - 10.01.00.23.xx.x-k JC 9/29/2018
  RHEL7.6, SLES12.4, SLES15
  - Fixed build issue.

  - 10.01.00.22.xx.x-k JC 9/25/2018
  RHEL7.6, SLES12.4, SLES15
  - qla2xxx: aggregated compile error fix ups.
  - qla2xxx: fix duplicate switch DB entries.
  - Revert "qla2xxx: fix duplicate switch's Nport ID entries."
  - qla2xxx: unable to discover NVME target.
  - qla2xxx: Move debug log messages which dereference SRB structure before issuing the command to firmware.
  - qla2xxx: Fix for double free of SRB structure used in Async switch query commands.
  - qla2xxx: fix double increment of switch scan retry count.
  - qla2xxx: fix duplicate switch's Nport ID entries.
  - qla2xxx: Schedule worker to process response queue
  - Revert "qla2xxx: Fix process response queue for ISP26XX and above"
  - qla2xxx: Enable Target mode for ISP28XX
  - qla2xxx: remove debug trace
  - qla2xxx: Do not set dev_loss_tmo while unregistering remote nvme port.
  - qla2xxx: Initialize atio request queue length.
  - qla2xxx: fix command premature free.
  - qla2xxx: Reject bsg request if chip is down.
  - qla2xxx: shutdown chip if reset fail
  - qla2xxx: fix stuck session in PLOGI state
  - qla2xxx: fix early srb free on abort
  - qla2xxx: Add mode control for each physical port.
  - qla2xxx: fix cleanup race condition
  - qla2xxx: fix dropped srb resource.
  - qla2xxx: fix port speed display on chip reset
  - qla2xxx: fix recursive mailbox timeout
  - qla2xxx: Check for Register disconnect, during adapter shutdown process.

  - 10.01.00.21.xx.x-k JC 8/21/2018
  RHEL7.6, SLES12.4, SLES15
  - Revert "qla2xxx: send nvme disconnect message to udev"
  - Revert "qla2xxx_udev: nvme disconnect"
  - qla2xxx: fix nvme session hang on unload

  - 10.01.00.20.xx.x-k JC 8/9/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Added retpoline support.
  - qla2xxx: Fixed module parameter for ql2xnvmeenable
  - extras: Fix qlssen.sh build initrd for SLES15.
  - extras: Fix udev bash command lines to use $PATH
  - qla2xxx: Added file Module.supported.
  RHEL7.5
  - scsi: qla2xxx: fix MSI-X vector affinity

  - 10.01.00.19.xx.x-k JC 8/6/2018
  RHEL7.5, SLES12.3, SLES15
  - extras: Fix usage of find in build.sh
  - qla2xxx: Fix for FC-NVMe discovery for NPIV port
  - qla2xxx: Set FC-NVMe feature to disabled as default
  - qla2xxx: fix tape device re-connect

  - 10.01.00.18.xx.x-k JC 7/26/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Return error when TM returns an error from firmware
  - qla2xxx: move abort code behind qpair
  - qla2xxx: extend abort timeout value
  - qla2xxx: fix srb's ref_count get race condition
  - qla2xxx: Fix memory leak for allocating abort IOCB. v2
  - qla2xxx: Enable FC-NVME on NPIV ports
  - qla2xxx: Fix NPIV handling for FC-NVMe
  - qla2xxx: use correct vp_idx for NPIV
  - qla2xxx: Fix vha access for FC-NVMe
  - qla2xxx: Fix erroneous session deletion
  - qla2xxx: Update: Fix NPORT ID display for N2N Direct connect
  - qla2xxx: back port IS_SW_RESV_ADDR

  - 10.01.00.17.07.5-k JC 7/26/2018
  - qla2xxx: Add case for 28xx transfer rate.
  - qla2xxx: Correct ISP filter for invalid SFP.
  - qla2xxx: Add signature for 28xx flash image.
  - qla2xxx: Include 28xx in abort isp cleanup.
  - qla2xxx: Fix flash/nvram addressing.
  - Revert "qla2xxx: Fix memory leak for allocating abort IOCB"

  - 10.01.00.16.07.5-k JC 7/11/2018
  - qla2xxx: Fix memory leak for allocating abort IOCB
  - qla2xxx: Fix MBX failure during driver unload for FCoE adapter
  - qla2xxx: silent warning in freeirq
  - qla2xxx_udev: nvme disconnect
  - qla2xxx: send nvme disconnect message to udev
  - qla2xxx: on session delete return nvme cmd
  - qla2xxx: fix N2N inifinite retry loop
  - qla2xxx: Remove stale ADISC_DONE event
  - qla2xxx: Shutdown Chip on unload.
  - qla2xxx: back port fw_started flag from upstream
  - qla2xxx: wait for session deletion done for npiv
  - qla2xxx: no isp recovery on unload
  - qla2xxx: fix uninit list head (sp->elem)

  - 10.01.00.15.07.5-k JC 6/25/2018
  - qla2xxx: Fix NPORT ID display for N2N Direct connect

  - 10.01.00.14.07.5-k HM 6/24/2018
  - qla2xxx: Fix spinlock resuctsion in qlt_reset()
  - qla2xxx: Fix process response queue for ISP26XX and above
  - qla2xxx: Fix NULL pointer derefrence for fcport search
  - qla2xxx: Fix kernel crash due to late workqueue allocation
  - qla2xxx: Alow nvme underrun to be handled transport.
  - qla2xxx: Fix inconsistent DMA mem alloc/free
  - qla2xxx: Fix Remote port registration
  - qla2xxx: Remove Stale code from update_fw_options() settings

  - 10.01.00.12.07.5-k HM 6/15/2018
  - qla2xxx: Retry Loop resync when req/rsp is not setup
  - qla2xxx: Fix NVMe Discovery
  - qla2xxx: Fix SF_SCANNING flag for async_gnnft
  - qla2xxx: Fix login_retry count
  - qla2xxx: Update:qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: Fix double free of sp
  - qla2xxx: assign NULL to dpc_thread before unloading to prevent crash
  - qla2xxx: Fix crash for get_qpair()
  - qla2xxx: Remove extra lock to reduce contention
  - qla2xxx: fix sp->vha assignment problem
  - qla2xxx: Reduce holding sess_lock to prevent CPU lock-up
  - qla2xxx: Move qla2x00_start_sp behind qpair
  - qla2xxx: Move {get|rel}_sp to base_qpair struct
  - qla2xxx: Updated: Zio6 interrupt threashold

  - 10.01.00.11.07.5-k HM 6/07/2018
  - qla2xxx: zio6 interrupt threshold
  - qla2xxx: UPDATE: serialize user space mailbox access.
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: fix out of order Termination and ABTS Resp
  - qla2xxx: fix missing mutex_unlock
  - qla2xxx: remove unneccessary byte swap
  - scsi: qla2xxx: Fix incorrect handle for abort IOCB
  - scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  - qla2xxx: add detection of ABTS hang
  - qla2xxx: fix ABTS response completion
  - qla2xxx: serialize user space mailbox access.
  - qla2xxx: allow speed set before chip is on
  - qla2xxx: Tweak debug info for invalid RX_ID
  - qla2xxx: fix deadlock between atio & hw lock
  - qla2xxx: remove redundant call to mark port lost
  - qla2xxx: fix double Rport
  - qla2xxx: serialize mailbox call.
  - qla2xxx: fix erroneous debug log.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add support for setting port speed
  - qla2xxx: holding off chip reset until target mode is enabled
  - qla2xxx: Terminate Plogi/PRLI if WWN is 0
  - qla2xxx: fix deadlock between qla & target core drivers
  - qla2xxx: Fix iIDMA error
  - qla2xxx: Remove all rports if fabric scan retry fails
  - qla2xxx: Force fw cleanup on ADISC error
  - qla2xxx: Turn off IOCB timeout timer on IOCB completion
  - qla2xxx: Decrement login retry count for only plogi
  - qla2xxx: Move rport registration out of internal work_list
  - qla2xxx: Remove redundant check for fcport deletion
  - qla2xxx: Update rscn_rcvd field to more meaningful scan_needed
  - qla2xxx: Use correct qpair for abort and cmd
  - extras: Fixed find syntax in build.sh
  - qla2xxx: Fix race between switch cmd completion and timeout
  - qla2xxx: Flush mailbox commands on chip reset
  - qla2xxx: Fix unintended Logout
  - qla2xxx: Fix session state stuck in Get Port DB
  - qla2xxx: Fix redundant fc_rport registration
  - qla2xxx: Silent erroneous message
  - qla2xxx: Prevent SysFS access when chip is down
  - qla2xxx: Add longer window for Chip reset
  - qla2xxx: Fix login retry count
  - qla2xxx: Fix setting lower transfer speed if GPSC fails
  - scsi: qla2xxx: Fix TMF and Multi-Queue config

  - 10.01.00.10.07.5-k HM 6/05/2018
  - qla2xxx: fix merge error
  - qla2xxx: migrate NVME N2N handling into state machine
  - qla2xxx: save frame payload size
  - qla2xxx: fix N2N link re-connect

  - 10.01.00.09.xx.y-k JC 5/24/2018
  - scsi: qla2xxx: remove the unused tcm_qla2xxx_cmd_wq
  - scsi: qla2xxx: Remove stale debug value for login_retry flag
  - scsi: qla2xxx: Use predefined get_datalen_for_atio() inline function
  - scsi: qla2xxx: Fix Inquiry command being dropped in Target mode
  - scsi: qla2xxx: Move GPSC and GFPNID out of session management
  - scsi: qla2xxx: Reduce redundant ADISC command for RSCNs
  - scsi: qla2xxx: Delete session for nport id change
  - scsi: qla2xxx: Fix Rport and session state getting out of sync
  - scsi: qla2xxx: Fix sending ADISC command for login
  - scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
  - scsi: qla2xxx: correctly shift host byte
  - scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
  - scsi: qla2xxx: Avoid double completion of abort command
  - scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: fx00 copypaste typo
  - scsi: qla2xxx: fix error message on <qla2400
  - scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  - scsi: qla2xxx: fix spelling mistake: "existant" -> "existent"
  - scsi: qla2xxx: Use dma_pool_zalloc()
  - scsi: qla2xxx: Remove unused symbols
  - scsi: qla2xxx: Use %p for printing pointers
  - scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
  - scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: Fix FC-NVMe LUN discovery
  - scsi: qla2xxx: ensure async flags are reset correctly
  - scsi: qla2xxx: do not check login_state if no loop id is assigned
  - scsi: qla2xxx: Fixup locking for session deletion
  - scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
  - scsi: qla2xxx: Fix double free bug after firmware timeout
  - scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  - scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  - scsi: qla2xxx: Add XCB counters to debugfs
  - scsi: qla2xxx: Fix warning during port_name debug print
  - scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  - scsi: qla2xxx: Fix recursion while sending terminate exchange
  - scsi: qla2xxx: remove redundant assignment of d
  - scsi: qla2xxx: Use zeroing allocator rather than allocator/memset
  - scsi: qla2xxx: Serialize session deletion by using work_lock
  - scsi: qla2xxx: Prevent relogin trigger from sending too many commands
  - scsi: qla2xxx: Prevent multiple active discovery commands per session
  - scsi: qla2xxx: Add retry limit for fabric scan logic
  - scsi: qla2xxx: Delay loop id allocation at login
  - scsi: qla2xxx: Increase verbosity of debug messages logged
  - scsi: qla2xxx: Allow relogin and session creation after reset
  - scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling
  - scsi: qla2xxx: Properly extract ADISC error codes
  - scsi: qla2xxx: Fix GPNFT/GNNFT error handling
  - scsi: qla2xxx: Remove session creation redundant code
  - scsi: qla2xxx: Migrate switch registration commands away from mailbox interface
  - scsi: qla2xxx: Fix login state machine freeze
  - scsi: qla2xxx: Reduce trace noise for Async Events
  - scsi: qla2xxx: Reduce the use of terminate exchange
  - scsi: qla2xxx: Add lock protection around host lookup
  - scsi: qla2xxx: Add switch command to simplify fabric discovery
  - scsi: qla2xxx: Use known NPort ID for Management Server login
  - scsi: qla2xxx: Fix session cleanup for N2N
  - scsi: qla2xxx: Tweak resource count dump
  - scsi: qla2xxx: Allow target mode to accept PRLI in dual mode
  - scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.
  - scsi: qla2xxx: Add ability to send PRLO
  - scsi: qla2xxx: Add option for use reserve exch for ELS
  - scsi: qla2xxx: Use shadow register for ISP27XX
  - scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX
  - scsi: qla2xxx: Move work element processing out of DPC thread
  - scsi: qla2xxx: Replace GPDB with async ADISC command
  - scsi: qla2xxx: Relogin to target port on a cable swap
  - scsi: qla2xxx: Chip reset uses wrong lock during IO flush.
  - scsi: qla2xxx: Add boundary checks for exchanges to be offloaded
  - scsi: qla2xxx: Use chip reset to bring down laser on unload.
  - scsi: qla2xxx: Use IOCB path to submit Control VP MBX command
  - scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que
  - scsi: qla2xxx: remove duplicate includes
  - scsi: qla2xxx: Fix memory leak in dual/target mode
  - scsi: qla2xxx: Fix system crash in qlt_plogi_ack_unref
  - scsi: qla2xxx: Clear loop id after delete
  - scsi: qla2xxx: Fix scan state field for fcport
  - scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
  - scsi: qla2xxx: Fix PRLI state check
  - scsi: qla2xxx: Fix NPIV host cleanup in target mode
  - scsi: qla2xxx: Move session delete to driver work queue
  - scsi: qla2xxx: Fix gpnid error processing

  - 10.01.00.08.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Fix NULL pointer crash with FC-NVMe LUNs during unload.

  - 10.01.00.07.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add fix to free dma memory.
  - qla2xxx: Mask off Scope bits in retry delay.

  - 10.01.00.06.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Remove module parameter ql2xqos_priority_test.
  - qla2xxx: Add ability to process multiple CT-PT SGE's.

  - 10.01.00.05.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Simplification of register address used in qla_tmpl.c.
  - qla2xxx: Correction and improvement to fwdt processing.
  - qla2xxx: Add correction to RDP FW support logic.
  - qla2xxx: serialize sess free
  - qla2xxx: serialize session deletion
  - qla2xxx: prevent re_login trigger from sending too many commands
  - qla2xxx: prevent multiple active discovery commands per session
  - qla2xxx: Add log message for bbcr.
  - qla2xxx: Remove alias names for QoS module parameters.

  - 10.01.00.04.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to non-existant fabric name.
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add qos fcport test mode.
  - qla2xxx: Optimized logs for searching qos fcport table.
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Correction to function qla26xx_read_qos_fcport_table().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Allow 27xx and 28xx to do bidirectional commands.
  - qla2xxx: Add RDP/ABTS deferred processing for vp's.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Rename QoS table row type and cleanup log prints.
  - qla2xxx: Optimize reading of QoS fcport table.
  - qla2xxx: Fixup/cleanup of QoS table index code.
  - qla2xxx: Minor cleanup of flash calls reoganization.
  - qla2xxx: Optimize flash register routines.
  - qla2xxx: Fixup flash register routines.
  - qla2xxx: Add debug prints to write flash routine.
  - qla2xxx: Simplify flash slow write log messages.
  - qla2xxx: Simplify NPIV create log messages.
  - qla2xxx: Simplify D-Port Diagnostics log messages.
  - qla2xxx: Cleanup log message for fwdt allocate.
  - qla2xxx: Add non-verbose SFP detail print.
  - qla2xxx: Quieten FEC=enabled message.
  - qla2xxx: Use interrupt pin number for port number.

  - 10.01.00.03.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to EFT selection.
  - qla2xxx: Correction to flash write routine.
  - qla2xxx: Add correction to FW image selection.

  - 10.01.00.02.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Convert FLT flash reads to register method.
  - qla2xxx: Undo the replacements to ->optrom_read() calls.
  - qla2xxx: Flash reading routines cleanups.
  - qla2xxx: Make flash write avoid register banging.

  - 10.01.00.01.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Use registers for reading unaligned flash offset.
  - qla2xxx: Fix PCI header and data struct addresses.
  - qla2xxx: Fix and cleanup ROM code version string reading.
  - qla2xxx: Corrections to flt->region addresses.
  - qla2xxx: Add debug buffer dump for INITFW MBC.
  - qla2xxx: Add debug logs for QoS sorting/searching.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: Add conditionals to avoid fcport QoS when it is not enabled.
  - qla2xxx: Fix mis-pointing buffer in qla24xx_load_risc_flash().
  - qla2xxx: Provide Makefile CPP define for MoB testing.
  - qla2xxx: Fixup flash region code struct.
  - qla2xxx: Fixup msix/msi vector selection.

  - 10.01.00.00.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add dump buffer print when nvram checksum fails.
  - qla2xxx: Refactor character signature compares into memcmp's.
  - qla2xxx: Replace 0x%x with %#x in all format strings.
  - qla2xxx: Normalize all flash reads to always use the dump ram mbc.
  - qla2xxx: Flash image validation cleanups.
  - qla2xxx: Add error test after dma_map_single.
  - qla2xxx: Add support for ISP28XX.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Minor cleanup regarding device type.
  - qla2xxx: Improve, correct, simplify fwdt endianess handling.
  - qla2xxx: Use endian macros to assign dynamic fields in fwdump buffer.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add endianizers to 27xx firmware image validator.
  - qla2xxx: Add new fwdt entry types.
  - qla2xxx: Leave fwdt endianess alone.
  - qla2xxx: Isolate test for valid firmware image.
  - qla2xxx: Add support for multiple fwdump templates/segments.
  - qla2xxx: Fix routine qla27xx_dump_mpi_ram().
  - qla2xxx: Fix routine qla27xx_dump_ram().
  - qla2xxx: Remove fwdt default template.

  - 10.00.00.60.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: nvme features developed/added.


