Intel v24.1 Network FW Update Release for Linux (For Linux)



===========================================================================
Intel v24.1 Network FW Update Release for Linux
Release date = 8/24/2019
Package Version: 7.00-4.10-1.2203.0-all-b
===========================================================================

CONTENTS
________

1.0  Change history
2.0  Web information and support phone Number
3.0  Notices and trademarks
4.0  Disclaimer


1.0  Change history
___________________


Changes and updates history:
============================

1) All X722 NVM images are updated to NVM 4.10 level with 1.2203.0 PREBOOT except
   SD650 stays at NVM 4.00 level with 1.1937.0 PREBOOT.
   All these NVM images are with LLDP Agent disabled.
   
2) All X710/XXV710 images are updated to NVM 7.00 level with 1.2203.0 PREBOOT except
   the X710-DA2 ML2 adapter stays at NVM 6.01 level with update to 1.2203.0 PREBOOT.

3) X550 NVM images are at NVM 2.0 level with updated 1.2203.0 PREBOOT.

4) PREBOOT 1.2203.0 update for I340, I350, X520, X540 adapters.

5) PREBOOT 1.2203.0 adds new HII setting feature for LLDP Agent for X722, XXV710, and X710 products,
   with persistent LLDP support, and also enhancement for proper Activity LED behaviors.

6) This update package also provides NVMUPDATE status log out to log file and display screen
   for better end user experience.

7) Include latest X722 FW update to properly identify dummy device 37CC when running X722 NVM update 
   in applicable systems that are operated with empty PHY card slot(s).

8) Include a FW fix for preventing any port link flap from system AC power cycle or re-initialization. 

9) Add persistent LLDP support for X710/XXV710/X722 products.

10) Fix a BMC share port issue with latest NVM image for the X710-DA2 ML2 adapter.

11) Enhancement to the FW/NVM fix for the X710, XXV710, and X722 products for the BMC No-Drop-Mode issue.

12) Add RC codes mapping support for some Intel's RCs to Lenovo's RCs.

13) Add Firmware Recovery Mode for X722, X710, XXV710, and X550 products.

14) PREBOOT 1.2203.0 includes BME fix for FW update.

15) NVMUPDATE tool updated to 1.34.12.0 to include proper IOMEM support for update in Linux.


More on Firmware Recovery Mode:

When a device is in Firmware Recovery mode it will not pass traffic or allow any configuration; you can only
attempt to recover the device's firmware. A device will enter Firmware Recovery mode if it detects a problem
that requires the firmware to be reprogrammed.

Resolving Firmware Recovery Mode Issues:

If your device is in Firmware Recovery mode you can restore it to factory defaults using the latest NVM
Update Package. Download the latest NVM Update Package from your vendor's support website and follow
the instructions in it.

*** NOTES:

- Before initiating device recovery, the integrity of the host operating system, device drivers
and firmware utilities must be verified and reinstalled if necessary. Fully functional operating
system, device drivers and tools are required for device recovery.

- AC power cycle your system even if the instructions do not indicate that an AC power cycle is required.
A power cycle is required to enable the device to restore and reload critical device settings to enable recovery. 
To perform an AC power cycle, do the following:

a. Shut down the system if it is powered up.
b. Unplug all AC power cords from the system.
c. Leave the AC power cords unplugged for 15 seconds to allow the system power supply to discharge completely.
d. Plug in AC power cords to the system.

- Firmware Recovery Mode Errors and Messages:

When a device is in Firmware Recovery mode, the device drivers and preboot software and utilities may log or
display messages such as the following:

a. Firmware recovery mode detected. Limiting functionality. 
Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.
b. Firmware recovery mode detected. Initialization failed.
c. Firmware recovery mode detected. Limiting functionality.
d. PXE-E0C: Firmware recovery mode detected. Initialization failed. 


2.0 Web Sites and Support Phone Number
______________________________________

   o  You can download new and updated files for Lenovo products from the Lenovo 
     Web site:

     http://datacentersupport.lenovo.com/

  o  With the original purchase of an Lenovo hardware product, you have access to 
     extensive support coverage.  During the Lenovo hardware product warranty 
     period, you may call the Lenovo HelpCenter for hardware product assistance 
     covered under the terms of the Lenovo hardware warranty.


3.0 Trademarks and Notices
__________________________

  Lenovo is a registered trademark of Lenovo Corporation in the United States 
  and other countries.

  Intel is a registered trademark of Intel Corporation in the United States
  and other countries.

  Linux is a registered trademark of Linus Torvalds in the United States and
  other countries.

  Other company, product, and service names may be trademarks or service marks
  of others.


4.0 Disclaimer
______________

  THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
  Lenovo DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
  INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS
  FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE
  INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, Lenovo
  GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

  Note to U.S. Government Users -- Documentation related to
  restricted rights -- Use, duplication or disclosure is subject
  to restrictions set forth in GSA ADP Schedule Contract with
  Lenovo Corporation.