# changelog

author: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> 3.137o
changelog:
  - Add work around HW/FW limitations with vlan encapsulated frames (Severity:Minor)
  - Fix for transmit queue 0 timed out when too many gso_segs (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137v
changelog:
  - Backport upstream patches  (Severity:Medium)
  - Add PHY reset workaround in change MTU path for 5717/19/20  (Severity:Medium)
  - Update the copyright (Severity:Minor)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137w
changelog:
  - Add SLES 15 support  (Severity:Medium)
  - Add RHEL 7.5 support (Severity:Medium)
  - Fix RHEL 6.4 compilation (Severity:Medium)


author: Siva Reddy Kallam <siva.kallam@broadcom.com> 3.137x
changelog:
  - Add Ubuntu 18.04 support  (Severity:Minor)
  - Fix race between tg3_get_stats64() and tg3_free_consistent() (Severity:Minor)
  - Avoid usleep_range() with holding spin lock (Severity:Minor)


author: sbahling@suse.com
changelog:
  - Initial SUSE PLDP build of automatic source pullfrom e1000.sf.net
    Pulled from https://netcologne.dl.sourceforge.net/project/e1000//i40e%20stable/2.4.3/i40e-2.4.3.tar.gz
  - Release README:
    Changelog for i40e 2.4.3
  - fix issue on X722 with netdev close removing RDMA instance
  - performance updates
  - fix some issues with link reporting
  - fix issue with tx timeouts on systems with > 128 cores
  - fix issue with promiscuous mode disappearing across resets
  - fix issue with flow director filters not working on fragmented IPv4
  - fix issue with duplicate flow director filters not being updated to HW


author: sbahling@suse.com
changelog:
  - New SolidDriver build
  - Add changelog
  - Add i40iw module to SLES 12 SP3 builds for kABI compatiblity
    Upstream Changelog for i40e 2.4.6
    - fix unnecessary PF resets issue
    - update Flow Director User documentation
    - fix compilation error on kernel 4.15.1


author: sbahling@suse.com
changelog:
  - Initial SUSE PLDP build of automatic source pullfrom e1000.sf.net
    Pulled from https://netcologne.dl.sourceforge.net/project/e1000//i40e%20stable/2.4.10/i40e-2.4.10.tar.gz
  - Release README:
    Upstream Changelog for i40e 2.4.10
    Add support for RHEL 7.5
    Fix synchronization issue with simultaneous resets on multiple ports


author: lance.ortiz@suse.com
changelog:
  - initial commit for i40e 2.6.12. includes retpoline support and
    udpated spec file to work with SLE15.


author: sbahling@suse.com
changelog:
  - Remove embedded i40iw module
  - Add Requires: intel-i40iw-kmp to preamble
  - Add Requires(pre): intel-i40iw-kmp to preamble to ensure i40iw
    gets installed first (both Requires lines required!)


author: lance.ortiz@suse.com
changelog:
  -New version intel-i40e-2.7.29
  - also added the 12 sp2 version of i40iw since that version won't
  - build without it.  Working on spec file to cover all versions


author: lance.ortiz@suse.com
changelog:
  -New version intel-i40e-2.9.21
  - Still and issue with building SLES15 SP1.  Spec file was
  - modified so that SP1 builds.  Issue is with i40iw driver


author: Broadcom Build Environment
changelog:
  -Added Linux SRIOV support
  -Added iSCSI & FCoE HBA support for specific HP adapters and devices
  -Added VC4.10 support
  -Added BCV support
  -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence.
  -Allow UDP tunneling offload
  -Enable IPGRE RSS by default
  -Support different GRE RSS modes.


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support.
  -Add RH6.5 support.
  -FC-TAPE - Host responds early to a requested resend delay - Linux (70101)
  -SLES11 MEZ75 IO halt with Nexus reboot tests (70728)
  -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187)
  -KVM gso and gro are not working on hv and vm as expected (70506)
  -SRIOV mtu toggle failure (70530)
  -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531)
  -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426)
  -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263)
  -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427)
  -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690)
  -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627)
  -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456)


author: QLogic Build Environment 7.12.37.1
changelog:
  - added RH5.11 support.
  - added RH6.6 & RH6.7 support.
  - added RH7.0 & RH7.1 support.
  - added SLES11-SP4 & SLES12 support.
  - added VLAN filtering offload support.
  - added Debian GNU/Linux 7 (wheezy) support.
  - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071).
  - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309).
  - RH7.x:  Tunneling offload is not enabled (79269).
  - self test fails on 20G adapter (79295).
  - VF interface vlan-filtering stopped working (79365).
  - Fail to force link speed other than 20G in KR2 (77841).
  - Incorrect asymmetric flow-control behavior (75504).
  - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590).
  - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]).
  - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded.
  - UDP packets cannot pass to the upper application (5709).
  - Out of memory issue when the adapter is reset (5709).
  - iSCSI offload: Driver displaying incorrect remote port (77842).
  - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704).


author: QLogic Cavium Build environment
changelog:
  - Version 8.18.18.0
  - Added missing support to configure 1G speed via ethtool
  - Fixed calculation of number of ooo rx buffers and limit to 16K

  - Version 8.18.17.0-1
  - iWARP - Handle flush completion on unaligned ll2 connection
  - Add dp_module, dp_level as modparams
  - Add Kconfig file for upstream builds

  - Version 8.18.16.0-1
  - Fix missing return error code check on call to qedi_setup_int
  - Modify different module params
  - Add log message in the driver unload path
  - Fail all non-timesync related ioctls

  - Version 8.18.15.0-1
  - Added wwpn and wwnn to the FCoE dev-info
  - Validate chap and mutual chap auth correctly

  - Version 8.18.14.0-1
  - Fix error handling flow in TX path
  - Fix error handling flow in RX path
  - Implement get_protocol_tlv_data callback


author: QLogic Corp <support@qlogic.com> 10.01.00.43.15.0-k-1
changelog:
  - 10.01.00.34.xx.y-k HM 12/17/2018
  - extras: Clean up build script for FC-NVMe install directive
  - qla2xxx: Add fix for N2N topology.
  - qla2xxx: Secure flash update support for ISP28XX.
  - qla2xxx: Restore WWPN of Physical Port for fabric configuration only for loop down.
  - qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary
  - qla2xxx: Initialize port speed to avoid setting lower speed

  - 10.01.00.33.xx.y-k HM 12/10/2018
  - extras: Silence diff related to nvme scripts with driver install script

  - 10.01.00.32.xx.y-k HM 12/07/2018
  - extras: update FC-NVMe boot script to use single TRADDR

  - 10.01.00.31.xx.y-k HM 12/04/2018
  - 10.01.00.30.xx.y-k SC 11/28/2018
  - qla2xxx: Fix for call trace being seen on reboot
  - Revert "qla2xxx: unable to discover NVME target."

  - 10.01.00.29.xx.y-k HM 11/21/2018
  - qla2xxx: Look for updated FC-NVME enable BIT to enable FC-NVME

  - 10.01.00.28.xx.y-k HM 11/21/2018
  - qla2xxx: Fix for call trace being seen on reboot

  - 10.01.00.27.xx.y-k HM 11/19/2018
  - qla2xxx: Fix issue reading primary region for ISP27xx/28xx
  - qla2xxx: Remove hardcoded OS value for SPECTER flags
  - qla2xxx: fix BUS Reset
  - qla2xxx: Correctly retrieve and interpret active flash regions for 27XX/28XX

  - 10.01.00.26.xx.y-k HM 11/05/2018
  - qla2xxx: fix stale mem access on unload. v2
  - Revert "qla2xxx: fix stale mem access on unload."
  - extras: Add capability to start system service
  - qla2xxx: fix stale mem access on unload.
  - qla2xxx: reduce duplicate code.
  - qla2xxx: Handle the fail case when fail to allocate memory for CT req and rsp.
  - qla2xxx: Change SRB allocation flag to ATOMIC to avoid sleeping in IRQ context.

  - 10.01.00.25.xx.x-k HM 10/20/2018
  - extras: Updated Build script for FC-NVMe Discovery
  - extras: Add Auto-connect scripts for FC-NVMe
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect
  - qla2xxx: Fix unload when NVMe devices are configured
  - qla2xxx: performance enhancement for ISP 28XX Target mode.
  - qla2xxx: tweak error code for bsg_request.
  - qla2xxx: reject garble setting for speed and qlini_mode
  - qla2xxx: performance enhancement for nvme
  - qla2xxx: Send Marker for each QPair.
  - qla2xxx: move marker request behind qpair

  - 10.01.00.24.xx.x-k HM 10/15/2018
  - qla2xxx: Correctly report max/min supported speeds for Mach adapter
  - qla2xxx: Fix flash pri/sec image selection bug
  - qla2xxx: Add 28xx flash primary/secondary refreshing
  - qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  - qla2xxx: Fix Use after free case while issuing Async TM command
  - qla2xxx: no MB IOCB during chip down
  - qla2xxx: Fix message to indicated Vectors used by driver
  - scsi: qla2xxx: don't allow negative thresholds
  - scsi: qla2xxx: Fix comment in MODULE_PARM_DESC in qla2xxx
  - scsi: qla2xxx: Remove set but not used variable 'ptr_dma'
  - scsi: qla2xxx: fix typo "CT-PASSTRHU" -> "CT-PASSTHRU"
  - qla2xxx: move error message behind error case.
  - scsi: qla2xxx: Add debug knob for user control workload

  - 10.01.00.23.xx.x-k JC 9/29/2018
  RHEL7.6, SLES12.4, SLES15
  - Fixed build issue.

  - 10.01.00.22.xx.x-k JC 9/25/2018
  RHEL7.6, SLES12.4, SLES15
  - qla2xxx: aggregated compile error fix ups.
  - qla2xxx: fix duplicate switch DB entries.
  - Revert "qla2xxx: fix duplicate switch's Nport ID entries."
  - qla2xxx: unable to discover NVME target.
  - qla2xxx: Move debug log messages which dereference SRB structure before issuing the command to firmware.
  - qla2xxx: Fix for double free of SRB structure used in Async switch query commands.
  - qla2xxx: fix double increment of switch scan retry count.
  - qla2xxx: fix duplicate switch's Nport ID entries.
  - qla2xxx: Schedule worker to process response queue
  - Revert "qla2xxx: Fix process response queue for ISP26XX and above"
  - qla2xxx: Enable Target mode for ISP28XX
  - qla2xxx: remove debug trace
  - qla2xxx: Do not set dev_loss_tmo while unregistering remote nvme port.
  - qla2xxx: Initialize atio request queue length.
  - qla2xxx: fix command premature free.
  - qla2xxx: Reject bsg request if chip is down.
  - qla2xxx: shutdown chip if reset fail
  - qla2xxx: fix stuck session in PLOGI state
  - qla2xxx: fix early srb free on abort
  - qla2xxx: Add mode control for each physical port.
  - qla2xxx: fix cleanup race condition
  - qla2xxx: fix dropped srb resource.
  - qla2xxx: fix port speed display on chip reset
  - qla2xxx: fix recursive mailbox timeout
  - qla2xxx: Check for Register disconnect, during adapter shutdown process.

  - 10.01.00.21.xx.x-k JC 8/21/2018
  RHEL7.6, SLES12.4, SLES15
  - Revert "qla2xxx: send nvme disconnect message to udev"
  - Revert "qla2xxx_udev: nvme disconnect"
  - qla2xxx: fix nvme session hang on unload

  - 10.01.00.20.xx.x-k JC 8/9/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Added retpoline support.
  - qla2xxx: Fixed module parameter for ql2xnvmeenable
  - extras: Fix qlssen.sh build initrd for SLES15.
  - extras: Fix udev bash command lines to use $PATH
  - qla2xxx: Added file Module.supported.
  RHEL7.5
  - scsi: qla2xxx: fix MSI-X vector affinity

  - 10.01.00.19.xx.x-k JC 8/6/2018
  RHEL7.5, SLES12.3, SLES15
  - extras: Fix usage of find in build.sh
  - qla2xxx: Fix for FC-NVMe discovery for NPIV port
  - qla2xxx: Set FC-NVMe feature to disabled as default
  - qla2xxx: fix tape device re-connect

  - 10.01.00.18.xx.x-k JC 7/26/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Return error when TM returns an error from firmware
  - qla2xxx: move abort code behind qpair
  - qla2xxx: extend abort timeout value
  - qla2xxx: fix srb's ref_count get race condition
  - qla2xxx: Fix memory leak for allocating abort IOCB. v2
  - qla2xxx: Enable FC-NVME on NPIV ports
  - qla2xxx: Fix NPIV handling for FC-NVMe
  - qla2xxx: use correct vp_idx for NPIV
  - qla2xxx: Fix vha access for FC-NVMe
  - qla2xxx: Fix erroneous session deletion
  - qla2xxx: Update: Fix NPORT ID display for N2N Direct connect
  - qla2xxx: back port IS_SW_RESV_ADDR

  - 10.01.00.17.07.5-k JC 7/26/2018
  - qla2xxx: Add case for 28xx transfer rate.
  - qla2xxx: Correct ISP filter for invalid SFP.
  - qla2xxx: Add signature for 28xx flash image.
  - qla2xxx: Include 28xx in abort isp cleanup.
  - qla2xxx: Fix flash/nvram addressing.
  - Revert "qla2xxx: Fix memory leak for allocating abort IOCB"

  - 10.01.00.16.07.5-k JC 7/11/2018
  - qla2xxx: Fix memory leak for allocating abort IOCB
  - qla2xxx: Fix MBX failure during driver unload for FCoE adapter
  - qla2xxx: silent warning in freeirq
  - qla2xxx_udev: nvme disconnect
  - qla2xxx: send nvme disconnect message to udev
  - qla2xxx: on session delete return nvme cmd
  - qla2xxx: fix N2N inifinite retry loop
  - qla2xxx: Remove stale ADISC_DONE event
  - qla2xxx: Shutdown Chip on unload.
  - qla2xxx: back port fw_started flag from upstream
  - qla2xxx: wait for session deletion done for npiv
  - qla2xxx: no isp recovery on unload
  - qla2xxx: fix uninit list head (sp->elem)

  - 10.01.00.15.07.5-k JC 6/25/2018
  - qla2xxx: Fix NPORT ID display for N2N Direct connect

  - 10.01.00.14.07.5-k HM 6/24/2018
  - qla2xxx: Fix spinlock resuctsion in qlt_reset()
  - qla2xxx: Fix process response queue for ISP26XX and above
  - qla2xxx: Fix NULL pointer derefrence for fcport search
  - qla2xxx: Fix kernel crash due to late workqueue allocation
  - qla2xxx: Alow nvme underrun to be handled transport.
  - qla2xxx: Fix inconsistent DMA mem alloc/free
  - qla2xxx: Fix Remote port registration
  - qla2xxx: Remove Stale code from update_fw_options() settings

  - 10.01.00.12.07.5-k HM 6/15/2018
  - qla2xxx: Retry Loop resync when req/rsp is not setup
  - qla2xxx: Fix NVMe Discovery
  - qla2xxx: Fix SF_SCANNING flag for async_gnnft
  - qla2xxx: Fix login_retry count
  - qla2xxx: Update:qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: Fix double free of sp
  - qla2xxx: assign NULL to dpc_thread before unloading to prevent crash
  - qla2xxx: Fix crash for get_qpair()
  - qla2xxx: Remove extra lock to reduce contention
  - qla2xxx: fix sp->vha assignment problem
  - qla2xxx: Reduce holding sess_lock to prevent CPU lock-up
  - qla2xxx: Move qla2x00_start_sp behind qpair
  - qla2xxx: Move {get|rel}_sp to base_qpair struct
  - qla2xxx: Updated: Zio6 interrupt threashold

  - 10.01.00.11.07.5-k HM 6/07/2018
  - qla2xxx: zio6 interrupt threshold
  - qla2xxx: UPDATE: serialize user space mailbox access.
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: fix out of order Termination and ABTS Resp
  - qla2xxx: fix missing mutex_unlock
  - qla2xxx: remove unneccessary byte swap
  - scsi: qla2xxx: Fix incorrect handle for abort IOCB
  - scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  - qla2xxx: add detection of ABTS hang
  - qla2xxx: fix ABTS response completion
  - qla2xxx: serialize user space mailbox access.
  - qla2xxx: allow speed set before chip is on
  - qla2xxx: Tweak debug info for invalid RX_ID
  - qla2xxx: fix deadlock between atio & hw lock
  - qla2xxx: remove redundant call to mark port lost
  - qla2xxx: fix double Rport
  - qla2xxx: serialize mailbox call.
  - qla2xxx: fix erroneous debug log.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add support for setting port speed
  - qla2xxx: holding off chip reset until target mode is enabled
  - qla2xxx: Terminate Plogi/PRLI if WWN is 0
  - qla2xxx: fix deadlock between qla & target core drivers
  - qla2xxx: Fix iIDMA error
  - qla2xxx: Remove all rports if fabric scan retry fails
  - qla2xxx: Force fw cleanup on ADISC error
  - qla2xxx: Turn off IOCB timeout timer on IOCB completion
  - qla2xxx: Decrement login retry count for only plogi
  - qla2xxx: Move rport registration out of internal work_list
  - qla2xxx: Remove redundant check for fcport deletion
  - qla2xxx: Update rscn_rcvd field to more meaningful scan_needed
  - qla2xxx: Use correct qpair for abort and cmd
  - extras: Fixed find syntax in build.sh
  - qla2xxx: Fix race between switch cmd completion and timeout
  - qla2xxx: Flush mailbox commands on chip reset
  - qla2xxx: Fix unintended Logout
  - qla2xxx: Fix session state stuck in Get Port DB
  - qla2xxx: Fix redundant fc_rport registration
  - qla2xxx: Silent erroneous message
  - qla2xxx: Prevent SysFS access when chip is down
  - qla2xxx: Add longer window for Chip reset
  - qla2xxx: Fix login retry count
  - qla2xxx: Fix setting lower transfer speed if GPSC fails
  - scsi: qla2xxx: Fix TMF and Multi-Queue config

  - 10.01.00.10.07.5-k HM 6/05/2018
  - qla2xxx: fix merge error
  - qla2xxx: migrate NVME N2N handling into state machine
  - qla2xxx: save frame payload size
  - qla2xxx: fix N2N link re-connect

  - 10.01.00.09.xx.y-k JC 5/24/2018
  - scsi: qla2xxx: remove the unused tcm_qla2xxx_cmd_wq
  - scsi: qla2xxx: Remove stale debug value for login_retry flag
  - scsi: qla2xxx: Use predefined get_datalen_for_atio() inline function
  - scsi: qla2xxx: Fix Inquiry command being dropped in Target mode
  - scsi: qla2xxx: Move GPSC and GFPNID out of session management
  - scsi: qla2xxx: Reduce redundant ADISC command for RSCNs
  - scsi: qla2xxx: Delete session for nport id change
  - scsi: qla2xxx: Fix Rport and session state getting out of sync
  - scsi: qla2xxx: Fix sending ADISC command for login
  - scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
  - scsi: qla2xxx: correctly shift host byte
  - scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
  - scsi: qla2xxx: Avoid double completion of abort command
  - scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: fx00 copypaste typo
  - scsi: qla2xxx: fix error message on <qla2400
  - scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  - scsi: qla2xxx: fix spelling mistake: "existant" -> "existent"
  - scsi: qla2xxx: Use dma_pool_zalloc()
  - scsi: qla2xxx: Remove unused symbols
  - scsi: qla2xxx: Use %p for printing pointers
  - scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
  - scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: Fix FC-NVMe LUN discovery
  - scsi: qla2xxx: ensure async flags are reset correctly
  - scsi: qla2xxx: do not check login_state if no loop id is assigned
  - scsi: qla2xxx: Fixup locking for session deletion
  - scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
  - scsi: qla2xxx: Fix double free bug after firmware timeout
  - scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  - scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  - scsi: qla2xxx: Add XCB counters to debugfs
  - scsi: qla2xxx: Fix warning during port_name debug print
  - scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  - scsi: qla2xxx: Fix recursion while sending terminate exchange
  - scsi: qla2xxx: remove redundant assignment of d
  - scsi: qla2xxx: Use zeroing allocator rather than allocator/memset
  - scsi: qla2xxx: Serialize session deletion by using work_lock
  - scsi: qla2xxx: Prevent relogin trigger from sending too many commands
  - scsi: qla2xxx: Prevent multiple active discovery commands per session
  - scsi: qla2xxx: Add retry limit for fabric scan logic
  - scsi: qla2xxx: Delay loop id allocation at login
  - scsi: qla2xxx: Increase verbosity of debug messages logged
  - scsi: qla2xxx: Allow relogin and session creation after reset
  - scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling
  - scsi: qla2xxx: Properly extract ADISC error codes
  - scsi: qla2xxx: Fix GPNFT/GNNFT error handling
  - scsi: qla2xxx: Remove session creation redundant code
  - scsi: qla2xxx: Migrate switch registration commands away from mailbox interface
  - scsi: qla2xxx: Fix login state machine freeze
  - scsi: qla2xxx: Reduce trace noise for Async Events
  - scsi: qla2xxx: Reduce the use of terminate exchange
  - scsi: qla2xxx: Add lock protection around host lookup
  - scsi: qla2xxx: Add switch command to simplify fabric discovery
  - scsi: qla2xxx: Use known NPort ID for Management Server login
  - scsi: qla2xxx: Fix session cleanup for N2N
  - scsi: qla2xxx: Tweak resource count dump
  - scsi: qla2xxx: Allow target mode to accept PRLI in dual mode
  - scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.
  - scsi: qla2xxx: Add ability to send PRLO
  - scsi: qla2xxx: Add option for use reserve exch for ELS
  - scsi: qla2xxx: Use shadow register for ISP27XX
  - scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX
  - scsi: qla2xxx: Move work element processing out of DPC thread
  - scsi: qla2xxx: Replace GPDB with async ADISC command
  - scsi: qla2xxx: Relogin to target port on a cable swap
  - scsi: qla2xxx: Chip reset uses wrong lock during IO flush.
  - scsi: qla2xxx: Add boundary checks for exchanges to be offloaded
  - scsi: qla2xxx: Use chip reset to bring down laser on unload.
  - scsi: qla2xxx: Use IOCB path to submit Control VP MBX command
  - scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que
  - scsi: qla2xxx: remove duplicate includes
  - scsi: qla2xxx: Fix memory leak in dual/target mode
  - scsi: qla2xxx: Fix system crash in qlt_plogi_ack_unref
  - scsi: qla2xxx: Clear loop id after delete
  - scsi: qla2xxx: Fix scan state field for fcport
  - scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
  - scsi: qla2xxx: Fix PRLI state check
  - scsi: qla2xxx: Fix NPIV host cleanup in target mode
  - scsi: qla2xxx: Move session delete to driver work queue
  - scsi: qla2xxx: Fix gpnid error processing

  - 10.01.00.08.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Fix NULL pointer crash with FC-NVMe LUNs during unload.

  - 10.01.00.07.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add fix to free dma memory.
  - qla2xxx: Mask off Scope bits in retry delay.

  - 10.01.00.06.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Remove module parameter ql2xqos_priority_test.
  - qla2xxx: Add ability to process multiple CT-PT SGE's.

  - 10.01.00.05.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Simplification of register address used in qla_tmpl.c.
  - qla2xxx: Correction and improvement to fwdt processing.
  - qla2xxx: Add correction to RDP FW support logic.
  - qla2xxx: serialize sess free
  - qla2xxx: serialize session deletion
  - qla2xxx: prevent re_login trigger from sending too many commands
  - qla2xxx: prevent multiple active discovery commands per session
  - qla2xxx: Add log message for bbcr.
  - qla2xxx: Remove alias names for QoS module parameters.

  - 10.01.00.04.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to non-existant fabric name.
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add qos fcport test mode.
  - qla2xxx: Optimized logs for searching qos fcport table.
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Correction to function qla26xx_read_qos_fcport_table().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Allow 27xx and 28xx to do bidirectional commands.
  - qla2xxx: Add RDP/ABTS deferred processing for vp's.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Rename QoS table row type and cleanup log prints.
  - qla2xxx: Optimize reading of QoS fcport table.
  - qla2xxx: Fixup/cleanup of QoS table index code.
  - qla2xxx: Minor cleanup of flash calls reoganization.
  - qla2xxx: Optimize flash register routines.
  - qla2xxx: Fixup flash register routines.
  - qla2xxx: Add debug prints to write flash routine.
  - qla2xxx: Simplify flash slow write log messages.
  - qla2xxx: Simplify NPIV create log messages.
  - qla2xxx: Simplify D-Port Diagnostics log messages.
  - qla2xxx: Cleanup log message for fwdt allocate.
  - qla2xxx: Add non-verbose SFP detail print.
  - qla2xxx: Quieten FEC=enabled message.
  - qla2xxx: Use interrupt pin number for port number.

  - 10.01.00.03.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to EFT selection.
  - qla2xxx: Correction to flash write routine.
  - qla2xxx: Add correction to FW image selection.

  - 10.01.00.02.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Convert FLT flash reads to register method.
  - qla2xxx: Undo the replacements to ->optrom_read() calls.
  - qla2xxx: Flash reading routines cleanups.
  - qla2xxx: Make flash write avoid register banging.

  - 10.01.00.01.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Use registers for reading unaligned flash offset.
  - qla2xxx: Fix PCI header and data struct addresses.
  - qla2xxx: Fix and cleanup ROM code version string reading.
  - qla2xxx: Corrections to flt->region addresses.
  - qla2xxx: Add debug buffer dump for INITFW MBC.
  - qla2xxx: Add debug logs for QoS sorting/searching.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: Add conditionals to avoid fcport QoS when it is not enabled.
  - qla2xxx: Fix mis-pointing buffer in qla24xx_load_risc_flash().
  - qla2xxx: Provide Makefile CPP define for MoB testing.
  - qla2xxx: Fixup flash region code struct.
  - qla2xxx: Fixup msix/msi vector selection.

  - 10.01.00.00.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add dump buffer print when nvram checksum fails.
  - qla2xxx: Refactor character signature compares into memcmp's.
  - qla2xxx: Replace 0x%x with %#x in all format strings.
  - qla2xxx: Normalize all flash reads to always use the dump ram mbc.
  - qla2xxx: Flash image validation cleanups.
  - qla2xxx: Add error test after dma_map_single.
  - qla2xxx: Add support for ISP28XX.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Minor cleanup regarding device type.
  - qla2xxx: Improve, correct, simplify fwdt endianess handling.
  - qla2xxx: Use endian macros to assign dynamic fields in fwdump buffer.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add endianizers to 27xx firmware image validator.
  - qla2xxx: Add new fwdt entry types.
  - qla2xxx: Leave fwdt endianess alone.
  - qla2xxx: Isolate test for valid firmware image.
  - qla2xxx: Add support for multiple fwdump templates/segments.
  - qla2xxx: Fix routine qla27xx_dump_mpi_ram().
  - qla2xxx: Fix routine qla27xx_dump_ram().
  - qla2xxx: Remove fwdt default template.

  - 10.00.00.60.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: nvme features developed/added.


author: QLogic Corp <support@qlogic.com> 10.01.00.55.15.0-k-1
changelog:
  - 10.01.00.48.xx.y-k HM 06/01/2019
  - qla2xxx: update: fix premature timer expiration

  - 10.01.00.47.xx.y-k HM 05/31/2019
  - qla2xxx: Update BPM enablement semantics.
  - qla2xxx: Use common update-firmware-options routine for ISP27xx+.
  - qla2xxx: Fix failed NVME port discovery after a short device port loss.
  - Revert "qla2xxx: Use chip to blink laser for switch timeout"
  - Revert "qla2xxx: update: Use chip to blink laser for switch timeout"
  - qla2xxx: Correct error handling during initialization failures.
  - qla2xxx: add error handling for PLOGI ELS passthrough
  - qla2xxx: update: Use chip to blink laser for switch timeout
  - qla2xxx: retry Fabric Scan on IOCB queue full.
  - qla2xxx: fix premature timer expiration
  - qla2xxx: UPDATE: fix login state machine freeze
  - qla2xxx: Dual FCP-NVMe target port support

  - 10.01.00.46.xx.y-k HM 05/14/2019
  - 10.01.00.45.xx.y-k HM 05/13/2019
  - 10.01.00.44.xx.y-k HM 05/06/2019
  - qla2xxx: Add cleanup for PCI EEH recovery
  - qla2xxx: Fix Crash due to NULL pointer access in qla2x00_sysfs_read_optrom()
  - qla2xxx: update: Fix DMA error when the DIF sg buffer crosses 4GB boundary
  - qla2xxx: reject eh_xxx request
  - qla2xxx: do command completion on abort timeout
  - qla2xxx: Use chip to blink laser for switch timeout
  - qla2xxx: fix recursive dead lock
  - qla2xxx: optimize NPIV tear down process.

  - 10.01.00.43.xx.y-k HM 04/05/2019
  - qla2xxx: Add support for ISP2089
  - qla2xxx: remove FW dump on LOOP init error.

  - 10.01.00.42.xx.y-k HM 03/27/2019
  - qla2xxx: fix potential dma_unmap leak
  - qla2xxx: fix different size dma alloc and unmap
  - qla2xxx: fix over index of qpair array.
  - qla2xxx: fix premature mem access.
  - qla2xxx: fix nvme device discovery
  - qla2xxx: fix abort timeout race condition.
  - qla2xxx: fix NVME LS cmd timeout race condition 2/2.
  - qla2xxx: fix NVME cmd timeout race condition 1/2.
  - qla2xxx: Remove defer flag to indicate immeadiate port loss
  - qla2xxx: Further limit FLASH region write access from SYSFS.
  - qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines.

  - 10.01.00.41.xx.y-k HM 03/13/2019
  - qla2xxx: Silence log messages from Autoconnet script
  - Revert "qla2xxx: Fix for the null pointer crash."

  - 10.01.00.40.xx.y-k HM 03/11/2019
  - qla2xxx: fix FW resource print error.
  - qla2xxx: Fix RHBA command time out on link reset.
  - qla2xxx: Fix crash due to unused NULL CPU pointer


  - 10.01.00.39.xx.y-k HM 03/06/2019
  - qla2xxx: Fix driver unload when FC-NVMe LUNs are connected
  - qla2xxx: Cleanup redundant qla2x00_abort_all_cmds during unload
  - qla2xxx: Set remote port devloss timeout to 0
  - qla2xxx: update: P2P issue with initiator and target port domains being different

  - 10.01.00.38.xx.y-k HM 02/27/2019
  - scsi: qla2xxx: Delete session for nport id change
  - qla2xxx: fix N2N link up hang.
  - qla2xxx: P2P issue with initiator and target port domains being different
  - qla2xxx: Cleanup unused functions.
  - qla2xxx: allow irqbalance control in non-MQ mode
  - qla2xxx: Correct fcport flags handling.
  - qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPs.
  - qla2xxx: Ensure flash updates return possible failure status through bsg interface.
  - qla2xxx: Improved secure flash support messages
  - qla2xxx: Update fcport disc_state only if we could allocate mem.
  - qla2xxx: Add a shadow variable to hold disc_state history of fcport
  - qla2xxx: v3: fix corrupt fw dump. 2/2
  - qla2xxx: v3: fix corrupt fw dump. 1/2

  - 10.01.00.37.xx.y-k HM 02/01/2019
  - qla2xxx: Fix for the null pointer crash.

  - 10.01.00.36.xx.y-k HM 01/31/2019
  - qla2xxx: Move disabling T10 DIF feature ealry in probe
  - qla2xxx: fix fabric scan hang
  - qla2xxx: Change abort wait_loop from msleep to wait_event_timeout.
  - qla2xxx: Track release of different command resources on completion.
  - qla2xxx: Increase the max_sgl_segments to 1024(max supported) to support larger IO size.
  - qla2xxx: Fix incorrect SFUB length used for Secure Flash Update MB Cmd
  - qla2xxx: fix Nport ID display value.
  - qla2xxx: Use correct pointer when calculating FLT checksum
  - qla2xxx: Added support for MPI and PEP regions for 28XX secure flash update.
  - qla2xxx: v2: Fix N2N link reset
  - qla2xxx: fix flag passing error
  - qla2xxx: Use FC generic update firmware options routine for ISP27xx.
  - qla2xxx: Avoid setting firmware options twice in 24xx_update_fw_options.
  - qla2xxx: Reset the FCF_ASYNC_SENT and FCF_ASYNC_ACTIVE flag after processing GPSC command.
  - qla2xxx: Set the qpair in SRB to NULL when SRB is released.
  - qla2xxx: Set the SCSI command result before calling the command done.
  - qla2xxx: Use complete switch scan for RSCN events
  - qla2xxx: Fix LUN discovery if loop id is not assigned yet by firmware
  - qla2xxx: prevent multiple active discovery commands per session
  - scsi: qla2xxx: Delete session for nport id change

  - 10.01.00.34.xx.y-k HM 12/17/2018
  - extras: Clean up build script for FC-NVMe install directive
  - qla2xxx: Add fix for N2N topology.
  - qla2xxx: Secure flash update support for ISP28XX.
  - qla2xxx: Restore WWPN of Physical Port for fabric configuration only for loop down.
  - qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary
  - qla2xxx: Initialize port speed to avoid setting lower speed

  - 10.01.00.33.xx.y-k HM 12/10/2018
  - extras: Silence diff related to nvme scripts with driver install script

  - 10.01.00.32.xx.y-k HM 12/07/2018
  - extras: update FC-NVMe boot script to use single TRADDR

  - 10.01.00.31.xx.y-k HM 12/04/2018
  - 10.01.00.30.xx.y-k SC 11/28/2018
  - qla2xxx: Fix for call trace being seen on reboot
  - Revert "qla2xxx: unable to discover NVME target."

  - 10.01.00.29.xx.y-k HM 11/21/2018
  - qla2xxx: Look for updated FC-NVME enable BIT to enable FC-NVME

  - 10.01.00.28.xx.y-k HM 11/21/2018
  - qla2xxx: Fix for call trace being seen on reboot

  - 10.01.00.27.xx.y-k HM 11/19/2018
  - qla2xxx: Fix issue reading primary region for ISP27xx/28xx
  - qla2xxx: Remove hardcoded OS value for SPECTER flags
  - qla2xxx: fix BUS Reset
  - qla2xxx: Correctly retrieve and interpret active flash regions for 27XX/28XX

  - 10.01.00.26.xx.y-k HM 11/05/2018
  - qla2xxx: fix stale mem access on unload. v2
  - Revert "qla2xxx: fix stale mem access on unload."
  - extras: Add capability to start system service
  - qla2xxx: fix stale mem access on unload.
  - qla2xxx: reduce duplicate code.
  - qla2xxx: Handle the fail case when fail to allocate memory for CT req and rsp.
  - qla2xxx: Change SRB allocation flag to ATOMIC to avoid sleeping in IRQ context.

  - 10.01.00.25.xx.x-k HM 10/20/2018
  - extras: Updated Build script for FC-NVMe Discovery
  - extras: Add Auto-connect scripts for FC-NVMe
  - qla2xxx: Add sysfs hooks for FC-NVMe autoconnect
  - qla2xxx: Fix unload when NVMe devices are configured
  - qla2xxx: performance enhancement for ISP 28XX Target mode.
  - qla2xxx: tweak error code for bsg_request.
  - qla2xxx: reject garble setting for speed and qlini_mode
  - qla2xxx: performance enhancement for nvme
  - qla2xxx: Send Marker for each QPair.
  - qla2xxx: move marker request behind qpair

  - 10.01.00.24.xx.x-k HM 10/15/2018
  - qla2xxx: Correctly report max/min supported speeds for Mach adapter
  - qla2xxx: Fix flash pri/sec image selection bug
  - qla2xxx: Add 28xx flash primary/secondary refreshing
  - qla2xxx: Add 28xx flash primary/secondary status/image mechanism
  - qla2xxx: Fix Use after free case while issuing Async TM command
  - qla2xxx: no MB IOCB during chip down
  - qla2xxx: Fix message to indicated Vectors used by driver
  - scsi: qla2xxx: don't allow negative thresholds
  - scsi: qla2xxx: Fix comment in MODULE_PARM_DESC in qla2xxx
  - scsi: qla2xxx: Remove set but not used variable 'ptr_dma'
  - scsi: qla2xxx: fix typo "CT-PASSTRHU" -> "CT-PASSTHRU"
  - qla2xxx: move error message behind error case.
  - scsi: qla2xxx: Add debug knob for user control workload

  - 10.01.00.23.xx.x-k JC 9/29/2018
  RHEL7.6, SLES12.4, SLES15
  - Fixed build issue.

  - 10.01.00.22.xx.x-k JC 9/25/2018
  RHEL7.6, SLES12.4, SLES15
  - qla2xxx: aggregated compile error fix ups.
  - qla2xxx: fix duplicate switch DB entries.
  - Revert "qla2xxx: fix duplicate switch's Nport ID entries."
  - qla2xxx: unable to discover NVME target.
  - qla2xxx: Move debug log messages which dereference SRB structure before issuing the command to firmware.
  - qla2xxx: Fix for double free of SRB structure used in Async switch query commands.
  - qla2xxx: fix double increment of switch scan retry count.
  - qla2xxx: fix duplicate switch's Nport ID entries.
  - qla2xxx: Schedule worker to process response queue
  - Revert "qla2xxx: Fix process response queue for ISP26XX and above"
  - qla2xxx: Enable Target mode for ISP28XX
  - qla2xxx: remove debug trace
  - qla2xxx: Do not set dev_loss_tmo while unregistering remote nvme port.
  - qla2xxx: Initialize atio request queue length.
  - qla2xxx: fix command premature free.
  - qla2xxx: Reject bsg request if chip is down.
  - qla2xxx: shutdown chip if reset fail
  - qla2xxx: fix stuck session in PLOGI state
  - qla2xxx: fix early srb free on abort
  - qla2xxx: Add mode control for each physical port.
  - qla2xxx: fix cleanup race condition
  - qla2xxx: fix dropped srb resource.
  - qla2xxx: fix port speed display on chip reset
  - qla2xxx: fix recursive mailbox timeout
  - qla2xxx: Check for Register disconnect, during adapter shutdown process.

  - 10.01.00.21.xx.x-k JC 8/21/2018
  RHEL7.6, SLES12.4, SLES15
  - Revert "qla2xxx: send nvme disconnect message to udev"
  - Revert "qla2xxx_udev: nvme disconnect"
  - qla2xxx: fix nvme session hang on unload

  - 10.01.00.20.xx.x-k JC 8/9/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Added retpoline support.
  - qla2xxx: Fixed module parameter for ql2xnvmeenable
  - extras: Fix qlssen.sh build initrd for SLES15.
  - extras: Fix udev bash command lines to use $PATH
  - qla2xxx: Added file Module.supported.
  RHEL7.5
  - scsi: qla2xxx: fix MSI-X vector affinity

  - 10.01.00.19.xx.x-k JC 8/6/2018
  RHEL7.5, SLES12.3, SLES15
  - extras: Fix usage of find in build.sh
  - qla2xxx: Fix for FC-NVMe discovery for NPIV port
  - qla2xxx: Set FC-NVMe feature to disabled as default
  - qla2xxx: fix tape device re-connect

  - 10.01.00.18.xx.x-k JC 7/26/2018
  RHEL7.5, SLES12.3, SLES15
  - qla2xxx: Return error when TM returns an error from firmware
  - qla2xxx: move abort code behind qpair
  - qla2xxx: extend abort timeout value
  - qla2xxx: fix srb's ref_count get race condition
  - qla2xxx: Fix memory leak for allocating abort IOCB. v2
  - qla2xxx: Enable FC-NVME on NPIV ports
  - qla2xxx: Fix NPIV handling for FC-NVMe
  - qla2xxx: use correct vp_idx for NPIV
  - qla2xxx: Fix vha access for FC-NVMe
  - qla2xxx: Fix erroneous session deletion
  - qla2xxx: Update: Fix NPORT ID display for N2N Direct connect
  - qla2xxx: back port IS_SW_RESV_ADDR

  - 10.01.00.17.07.5-k JC 7/26/2018
  - qla2xxx: Add case for 28xx transfer rate.
  - qla2xxx: Correct ISP filter for invalid SFP.
  - qla2xxx: Add signature for 28xx flash image.
  - qla2xxx: Include 28xx in abort isp cleanup.
  - qla2xxx: Fix flash/nvram addressing.
  - Revert "qla2xxx: Fix memory leak for allocating abort IOCB"

  - 10.01.00.16.07.5-k JC 7/11/2018
  - qla2xxx: Fix memory leak for allocating abort IOCB
  - qla2xxx: Fix MBX failure during driver unload for FCoE adapter
  - qla2xxx: silent warning in freeirq
  - qla2xxx_udev: nvme disconnect
  - qla2xxx: send nvme disconnect message to udev
  - qla2xxx: on session delete return nvme cmd
  - qla2xxx: fix N2N inifinite retry loop
  - qla2xxx: Remove stale ADISC_DONE event
  - qla2xxx: Shutdown Chip on unload.
  - qla2xxx: back port fw_started flag from upstream
  - qla2xxx: wait for session deletion done for npiv
  - qla2xxx: no isp recovery on unload
  - qla2xxx: fix uninit list head (sp->elem)

  - 10.01.00.15.07.5-k JC 6/25/2018
  - qla2xxx: Fix NPORT ID display for N2N Direct connect

  - 10.01.00.14.07.5-k HM 6/24/2018
  - qla2xxx: Fix spinlock resuctsion in qlt_reset()
  - qla2xxx: Fix process response queue for ISP26XX and above
  - qla2xxx: Fix NULL pointer derefrence for fcport search
  - qla2xxx: Fix kernel crash due to late workqueue allocation
  - qla2xxx: Alow nvme underrun to be handled transport.
  - qla2xxx: Fix inconsistent DMA mem alloc/free
  - qla2xxx: Fix Remote port registration
  - qla2xxx: Remove Stale code from update_fw_options() settings

  - 10.01.00.12.07.5-k HM 6/15/2018
  - qla2xxx: Retry Loop resync when req/rsp is not setup
  - qla2xxx: Fix NVMe Discovery
  - qla2xxx: Fix SF_SCANNING flag for async_gnnft
  - qla2xxx: Fix login_retry count
  - qla2xxx: Update:qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: move command alloc to tcm_qla2xxx
  - qla2xxx: Fix double free of sp
  - qla2xxx: assign NULL to dpc_thread before unloading to prevent crash
  - qla2xxx: Fix crash for get_qpair()
  - qla2xxx: Remove extra lock to reduce contention
  - qla2xxx: fix sp->vha assignment problem
  - qla2xxx: Reduce holding sess_lock to prevent CPU lock-up
  - qla2xxx: Move qla2x00_start_sp behind qpair
  - qla2xxx: Move {get|rel}_sp to base_qpair struct
  - qla2xxx: Updated: Zio6 interrupt threashold

  - 10.01.00.11.07.5-k HM 6/07/2018
  - qla2xxx: zio6 interrupt threshold
  - qla2xxx: UPDATE: serialize user space mailbox access.
  - qla2xxx: firmware option 3 is clobbered by speed set
  - qla2xxx: fix out of order Termination and ABTS Resp
  - qla2xxx: fix missing mutex_unlock
  - qla2xxx: remove unneccessary byte swap
  - scsi: qla2xxx: Fix incorrect handle for abort IOCB
  - scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  - qla2xxx: add detection of ABTS hang
  - qla2xxx: fix ABTS response completion
  - qla2xxx: serialize user space mailbox access.
  - qla2xxx: allow speed set before chip is on
  - qla2xxx: Tweak debug info for invalid RX_ID
  - qla2xxx: fix deadlock between atio & hw lock
  - qla2xxx: remove redundant call to mark port lost
  - qla2xxx: fix double Rport
  - qla2xxx: serialize mailbox call.
  - qla2xxx: fix erroneous debug log.
  - qla2xxx: Add beacon LED config sysfs interface.
  - qla2xxx: Add support for setting port speed
  - qla2xxx: holding off chip reset until target mode is enabled
  - qla2xxx: Terminate Plogi/PRLI if WWN is 0
  - qla2xxx: fix deadlock between qla & target core drivers
  - qla2xxx: Fix iIDMA error
  - qla2xxx: Remove all rports if fabric scan retry fails
  - qla2xxx: Force fw cleanup on ADISC error
  - qla2xxx: Turn off IOCB timeout timer on IOCB completion
  - qla2xxx: Decrement login retry count for only plogi
  - qla2xxx: Move rport registration out of internal work_list
  - qla2xxx: Remove redundant check for fcport deletion
  - qla2xxx: Update rscn_rcvd field to more meaningful scan_needed
  - qla2xxx: Use correct qpair for abort and cmd
  - extras: Fixed find syntax in build.sh
  - qla2xxx: Fix race between switch cmd completion and timeout
  - qla2xxx: Flush mailbox commands on chip reset
  - qla2xxx: Fix unintended Logout
  - qla2xxx: Fix session state stuck in Get Port DB
  - qla2xxx: Fix redundant fc_rport registration
  - qla2xxx: Silent erroneous message
  - qla2xxx: Prevent SysFS access when chip is down
  - qla2xxx: Add longer window for Chip reset
  - qla2xxx: Fix login retry count
  - qla2xxx: Fix setting lower transfer speed if GPSC fails
  - scsi: qla2xxx: Fix TMF and Multi-Queue config

  - 10.01.00.10.07.5-k HM 6/05/2018
  - qla2xxx: fix merge error
  - qla2xxx: migrate NVME N2N handling into state machine
  - qla2xxx: save frame payload size
  - qla2xxx: fix N2N link re-connect

  - 10.01.00.09.xx.y-k JC 5/24/2018
  - scsi: qla2xxx: remove the unused tcm_qla2xxx_cmd_wq
  - scsi: qla2xxx: Remove stale debug value for login_retry flag
  - scsi: qla2xxx: Use predefined get_datalen_for_atio() inline function
  - scsi: qla2xxx: Fix Inquiry command being dropped in Target mode
  - scsi: qla2xxx: Move GPSC and GFPNID out of session management
  - scsi: qla2xxx: Reduce redundant ADISC command for RSCNs
  - scsi: qla2xxx: Delete session for nport id change
  - scsi: qla2xxx: Fix Rport and session state getting out of sync
  - scsi: qla2xxx: Fix sending ADISC command for login
  - scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
  - scsi: qla2xxx: correctly shift host byte
  - scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
  - scsi: qla2xxx: Avoid double completion of abort command
  - scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: fx00 copypaste typo
  - scsi: qla2xxx: fix error message on <qla2400
  - scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  - scsi: qla2xxx: fix spelling mistake: "existant" -> "existent"
  - scsi: qla2xxx: Use dma_pool_zalloc()
  - scsi: qla2xxx: Remove unused symbols
  - scsi: qla2xxx: Use %p for printing pointers
  - scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
  - scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
  - scsi: qla2xxx: Fix FC-NVMe LUN discovery
  - scsi: qla2xxx: ensure async flags are reset correctly
  - scsi: qla2xxx: do not check login_state if no loop id is assigned
  - scsi: qla2xxx: Fixup locking for session deletion
  - scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
  - scsi: qla2xxx: Fix double free bug after firmware timeout
  - scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  - scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  - scsi: qla2xxx: Add XCB counters to debugfs
  - scsi: qla2xxx: Fix warning during port_name debug print
  - scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  - scsi: qla2xxx: Fix recursion while sending terminate exchange
  - scsi: qla2xxx: remove redundant assignment of d
  - scsi: qla2xxx: Use zeroing allocator rather than allocator/memset
  - scsi: qla2xxx: Serialize session deletion by using work_lock
  - scsi: qla2xxx: Prevent relogin trigger from sending too many commands
  - scsi: qla2xxx: Prevent multiple active discovery commands per session
  - scsi: qla2xxx: Add retry limit for fabric scan logic
  - scsi: qla2xxx: Delay loop id allocation at login
  - scsi: qla2xxx: Increase verbosity of debug messages logged
  - scsi: qla2xxx: Allow relogin and session creation after reset
  - scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling
  - scsi: qla2xxx: Properly extract ADISC error codes
  - scsi: qla2xxx: Fix GPNFT/GNNFT error handling
  - scsi: qla2xxx: Remove session creation redundant code
  - scsi: qla2xxx: Migrate switch registration commands away from mailbox interface
  - scsi: qla2xxx: Fix login state machine freeze
  - scsi: qla2xxx: Reduce trace noise for Async Events
  - scsi: qla2xxx: Reduce the use of terminate exchange
  - scsi: qla2xxx: Add lock protection around host lookup
  - scsi: qla2xxx: Add switch command to simplify fabric discovery
  - scsi: qla2xxx: Use known NPort ID for Management Server login
  - scsi: qla2xxx: Fix session cleanup for N2N
  - scsi: qla2xxx: Tweak resource count dump
  - scsi: qla2xxx: Allow target mode to accept PRLI in dual mode
  - scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.
  - scsi: qla2xxx: Add ability to send PRLO
  - scsi: qla2xxx: Add option for use reserve exch for ELS
  - scsi: qla2xxx: Use shadow register for ISP27XX
  - scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX
  - scsi: qla2xxx: Move work element processing out of DPC thread
  - scsi: qla2xxx: Replace GPDB with async ADISC command
  - scsi: qla2xxx: Relogin to target port on a cable swap
  - scsi: qla2xxx: Chip reset uses wrong lock during IO flush.
  - scsi: qla2xxx: Add boundary checks for exchanges to be offloaded
  - scsi: qla2xxx: Use chip reset to bring down laser on unload.
  - scsi: qla2xxx: Use IOCB path to submit Control VP MBX command
  - scsi: qla2xxx: Fix smatch warning in qla25xx_delete_{rsp|req}_que
  - scsi: qla2xxx: remove duplicate includes
  - scsi: qla2xxx: Fix memory leak in dual/target mode
  - scsi: qla2xxx: Fix system crash in qlt_plogi_ack_unref
  - scsi: qla2xxx: Clear loop id after delete
  - scsi: qla2xxx: Fix scan state field for fcport
  - scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
  - scsi: qla2xxx: Fix PRLI state check
  - scsi: qla2xxx: Fix NPIV host cleanup in target mode
  - scsi: qla2xxx: Move session delete to driver work queue
  - scsi: qla2xxx: Fix gpnid error processing

  - 10.01.00.08.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Fix NULL pointer crash with FC-NVMe LUNs during unload.

  - 10.01.00.07.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add fix to free dma memory.
  - qla2xxx: Mask off Scope bits in retry delay.

  - 10.01.00.06.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Remove module parameter ql2xqos_priority_test.
  - qla2xxx: Add ability to process multiple CT-PT SGE's.

  - 10.01.00.05.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Simplification of register address used in qla_tmpl.c.
  - qla2xxx: Correction and improvement to fwdt processing.
  - qla2xxx: Add correction to RDP FW support logic.
  - qla2xxx: serialize sess free
  - qla2xxx: serialize session deletion
  - qla2xxx: prevent re_login trigger from sending too many commands
  - qla2xxx: prevent multiple active discovery commands per session
  - qla2xxx: Add log message for bbcr.
  - qla2xxx: Remove alias names for QoS module parameters.

  - 10.01.00.04.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to non-existant fabric name.
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add qos fcport test mode.
  - qla2xxx: Optimized logs for searching qos fcport table.
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Correction to function qla26xx_read_qos_fcport_table().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Allow 27xx and 28xx to do bidirectional commands.
  - qla2xxx: Add RDP/ABTS deferred processing for vp's.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Rename QoS table row type and cleanup log prints.
  - qla2xxx: Optimize reading of QoS fcport table.
  - qla2xxx: Fixup/cleanup of QoS table index code.
  - qla2xxx: Minor cleanup of flash calls reoganization.
  - qla2xxx: Optimize flash register routines.
  - qla2xxx: Fixup flash register routines.
  - qla2xxx: Add debug prints to write flash routine.
  - qla2xxx: Simplify flash slow write log messages.
  - qla2xxx: Simplify NPIV create log messages.
  - qla2xxx: Simplify D-Port Diagnostics log messages.
  - qla2xxx: Cleanup log message for fwdt allocate.
  - qla2xxx: Add non-verbose SFP detail print.
  - qla2xxx: Quieten FEC=enabled message.
  - qla2xxx: Use interrupt pin number for port number.

  - 10.01.00.03.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Correction to EFT selection.
  - qla2xxx: Correction to flash write routine.
  - qla2xxx: Add correction to FW image selection.

  - 10.01.00.02.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Convert FLT flash reads to register method.
  - qla2xxx: Undo the replacements to ->optrom_read() calls.
  - qla2xxx: Flash reading routines cleanups.
  - qla2xxx: Make flash write avoid register banging.

  - 10.01.00.01.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Use registers for reading unaligned flash offset.
  - qla2xxx: Fix PCI header and data struct addresses.
  - qla2xxx: Fix and cleanup ROM code version string reading.
  - qla2xxx: Corrections to flt->region addresses.
  - qla2xxx: Add debug buffer dump for INITFW MBC.
  - qla2xxx: Add debug logs for QoS sorting/searching.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: Add conditionals to avoid fcport QoS when it is not enabled.
  - qla2xxx: Fix mis-pointing buffer in qla24xx_load_risc_flash().
  - qla2xxx: Provide Makefile CPP define for MoB testing.
  - qla2xxx: Fixup flash region code struct.
  - qla2xxx: Fixup msix/msi vector selection.

  - 10.01.00.00.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: Add dump buffer print when nvram checksum fails.
  - qla2xxx: Refactor character signature compares into memcmp's.
  - qla2xxx: Replace 0x%x with %#x in all format strings.
  - qla2xxx: Normalize all flash reads to always use the dump ram mbc.
  - qla2xxx: Flash image validation cleanups.
  - qla2xxx: Add error test after dma_map_single.
  - qla2xxx: Add support for ISP28XX.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Minor cleanup regarding device type.
  - qla2xxx: Improve, correct, simplify fwdt endianess handling.
  - qla2xxx: Use endian macros to assign dynamic fields in fwdump buffer.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add endianizers to 27xx firmware image validator.
  - qla2xxx: Add new fwdt entry types.
  - qla2xxx: Leave fwdt endianess alone.
  - qla2xxx: Isolate test for valid firmware image.
  - qla2xxx: Add support for multiple fwdump templates/segments.
  - qla2xxx: Fix routine qla27xx_dump_mpi_ram().
  - qla2xxx: Fix routine qla27xx_dump_ram().
  - qla2xxx: Remove fwdt default template.

  - 10.00.00.60.xx.y-k
  RHEL7.5, SLES12.3 NVME
  - qla2xxx: nvme features developed/added.


author: QLogic Corp <support@qlogic.com> 8.08.00.08.15.0-k-1
changelog:
  - 8.08.00.08.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Makefile updated for retpoline.

  - 8.08.00.07.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add fix to free dma memory.
  - qla2xxx: Mask off Scope bits in retry delay.

  - 8.08.00.06.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Remove module parameter ql2xqos_priority_test.
  - qla2xxx: Add ability to process multiple CT-PT SGE's.

  - 8.08.00.05.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Simplification of register address used in qla_tmpl.c.
  - qla2xxx: Correction and improvement to fwdt processing.
  - qla2xxx: Add correction to RDP FW support logic.
  - qla2xxx: serialize sess free
  - qla2xxx: serialize session deletion
  - qla2xxx: prevent re_login trigger from sending too many commands
  - qla2xxx: prevent multiple active discovery commands per session
  - qla2xxx: Add log message for bbcr.
  - qla2xxx: Remove alias names for QoS module parameters.

  - 8.08.00.04.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Correction to non-existant fabric name.
  - qla2xxx: Handle cases for limiting RDP response payload length.
  - qla2xxx: Add qos fcport test mode.
  - qla2xxx: Optimized logs for searching qos fcport table.
  - qla2xxx: Correction to tests for iocb fabric and fcport qos.
  - qla2xxx: Correction to function qla26xx_read_qos_fcport_table().
  - qla2xxx: Correction to MB in-direction selection in qla2x00_echo_test().
  - qla2xxx: Correction to selection of loopback/echo test.
  - qla2xxx: Allow 27xx and 28xx to do bidirectional commands.
  - qla2xxx: Add RDP/ABTS deferred processing for vp's.
  - qla2xxx: Add deferred queue for processing ABTS and RDP.
  - qla2xxx: Cleanup ELS/PUREX iocb fields.
  - qla2xxx: Rename QoS table row type and cleanup log prints.
  - qla2xxx: Optimize reading of QoS fcport table.
  - qla2xxx: Fixup/cleanup of QoS table index code.
  - qla2xxx: Minor cleanup of flash calls reoganization.
  - qla2xxx: Optimize flash register routines.
  - qla2xxx: Fixup flash register routines.
  - qla2xxx: Add debug prints to write flash routine.
  - qla2xxx: Simplify flash slow write log messages.
  - qla2xxx: Simplify NPIV create log messages.
  - qla2xxx: Simplify D-Port Diagnostics log messages.
  - qla2xxx: Cleanup log message for fwdt allocate.
  - qla2xxx: Add non-verbose SFP detail print.
  - qla2xxx: Quieten FEC=enabled message.
  - qla2xxx: Use interrupt pin number for port number.

  - 8.08.00.03.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Correction to EFT selection.
  - qla2xxx: Correction to flash write routine.
  - qla2xxx: Add correction to FW image selection.

  - 8.08.00.02.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Convert FLT flash reads to register method.
  - qla2xxx: Undo the replacements to ->optrom_read() calls.
  - qla2xxx: Flash reading routines cleanups.
  - qla2xxx: Make flash write avoid register banging.

  - 8.08.00.01.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Use registers for reading unaligned flash offset.
  - qla2xxx: Fix PCI header and data struct addresses.
  - qla2xxx: Fix and cleanup ROM code version string reading.
  - qla2xxx: Corrections to flt->region addresses.
  - qla2xxx: Add debug buffer dump for INITFW MBC.
  - qla2xxx: Add debug logs for QoS sorting/searching.
  - qla2xxx: Use ->isp_ops->read_optrom() in qla26xx_read_qos_fcport_table().
  - qla2xxx: QoS fcport table index initialization improvement.
  - qla2xxx: Add QoS fcport table index to speed up search.
  - qla2xxx: Reduce stack on qos fcport priority routines.
  - qla2xxx: Add conditionals to avoid fcport QoS when it is not enabled.
  - qla2xxx: Fix mis-pointing buffer in qla24xx_load_risc_flash().
  - qla2xxx: Provide Makefile CPP define for MoB testing.
  - qla2xxx: Fixup flash region code struct.
  - qla2xxx: Fixup msix/msi vector selection.

  - 8.08.00.00.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add dump buffer print when nvram checksum fails.
  - qla2xxx: Refactor character signature compares into memcmp's.
  - qla2xxx: Replace 0x%x with %#x in all format strings.
  - qla2xxx: Normalize all flash reads to always use the dump ram mbc.
  - qla2xxx: Flash image validation cleanups.
  - qla2xxx: Add error test after dma_map_single.
  - qla2xxx: Add support for ISP28XX.
  - qla2xxx: Add devid's and conditionals for 28xx.
  - qla2xxx: Minor cleanup regarding device type.
  - qla2xxx: Improve, correct, simplify fwdt endianess handling.
  - qla2xxx: Use endian macros to assign dynamic fields in fwdump buffer.
  - qla2xxx: Use endian macros to assign static fields in fwdump header.
  - qla2xxx: Add endianizers to 27xx firmware image validator.
  - qla2xxx: Add new fwdt entry types.
  - qla2xxx: Leave fwdt endianess alone.
  - qla2xxx: Isolate test for valid firmware image.
  - qla2xxx: Add support for multiple fwdump templates/segments.
  - qla2xxx: Fix routine qla27xx_dump_mpi_ram().
  - qla2xxx: Fix routine qla27xx_dump_ram().
  - qla2xxx: Remove fwdt default template.

  - 8.07.00.60.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Sort qos_fcport_table->table for quicker searching.
  - qla2xxx: QoS fcport rename table->entry.
  - Revert "qla2xxx: Simplify fabric discovery part 2"

  - 8.07.00.59.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Read E2E QoS fcport priority bitmasks from flash.
  - qla2xxx: Add correction to E2E QoS bsg interface.
  - qla2xxx: Simplify PPC architecture detection.

  - 8.07.00.58.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Add debug logs to bsg qos interface.
  - qla2xxx: Add pointer to reference bsg request.
  - qla2xxx: Modify bsg get_qos_enabled to be per hba port.
  - qla2xxx: Add bsg interface for qos lun level bitmask.
  - qla2xxx: Abstract qos lun level mask for iocb cs_ctl field.
  - qla2xxx: Add fabric priority qos lun iocb mechanism.
  - qla2xxx: Implement CT command GFO (Get Fabric Object).
  - qla2xxx: Add correction ql2xfabric_priority parameter description.
  - qla2xxx: Add extra debug print to bsg interface entry.
  - qla2xxx: Fix incorrect assignment instances of bsg_job->reply_len.
  - qla2xxx: Remove RDP response size cropping for logged out port.
  - qla2xxx: Fix supported speed ranges in FDMI/RDP.
  - qla2xxx: Simplify/cleanup max supported speed usage.
  - qla2xxx: Use gcc define to detect PPC architecture.
  - qla2xxx: Fix stale memory access for IRQ name
  - qla2xxx: Login state machine stuck at GPDB.
  - qla2xxx: Fix null pointer access on iocb timeout
  - qla2xxx: Fix gpnid crash.
  - qla2xxx: Serialize gpnid.
  - qla2xxx: Retry switch command on timed out.
  - qla2xxx: Simplify fabric discovery part 2
  - qla2xxx: Fix relogin for Nport Handle in use.
  - qla2xxx: Relogin is being triggered too fast.

  - 8.07.00.57.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71, XS72:
  - qla2xxx: Cleanup sparse warnings.
  - qla2xxx: Cleanup dpc handler routine.
  - qla2xxx: Minor cleanups regarding SFP validation.
  - qla2xxx: Replace all instances of snprintf() with scnprintf().
  - qla2xxx: Clean up usage of list_for_each_entry_safe().
  - qla2xxx: Use typeof() as 2nd argument to container_of().
  - qla2xxx: Simplify assignment of req_q_out index/pointer.
  - qla2xxx: Cleanup/simplify/uniformitize GS routines.
  - qla2xxx: Export ha->port_no to sysfs.
  - qla2xxx: Fix continuation indents in fwdt.
  - qla2xxx: Cleanup __iomem attribute in fwdt.
  - qla2xxx: Minor improvements and corrections to fwdt code.
  - qla2xxx: Flash sanity test cleanups and corrections.
  - qla2xxx: Simplify read/write flash dword routines.
  - qla2xxx: Simplify ql_dump_buffer() interface usage.
  - extras: Simplify log.sh
  - qla2xxx: Add short name for SFP range autodetect.
  - qla2xxx: Fix integer overflow in bsg code.
  - qla2xxx: Fix an integer overflow in sysfs code
  - qla2xxx: Export firmware attributes word to sysfs.
  - qla2xxx: Make bsg request crash-proof.
  - qla2xxx: Normalize duplicate timeout field contexts.
  - qla2xxx: Fix duplicate timeout fields used in wrong contexts.
  - qla2xxx: Fix vha/ha contexts accidentally swapped.
  - qla2xxx: Simplify execution of fabric commands.

  - 8.07.00.56.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11:
  - qla2xxx: Increment version to sync drivers.
  XS65, XS70, XS71:
  - qla2xxx: Sync up RDP response handling.
  - extras: Correction to build_rpm.sh.

  - 8.07.00.55.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70, XS71:
  - qla2xxx: Correct description of module parameter based on usage.
  - qla2xxx: Add sysfs node for D-Port Diagnostics AEN data.
  - qla2xxx: Add D-Port Diagnostic reason explanation logs.

  - 8.07.00.54.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70:
  - extras: Add script to modify logging value
  - qla2xxx: move session delete to driver work queue
  - qla2xxx: recheck session state after rscn
  - qla2xxx: Add workqueue to delete fcport from bsg sp->free().
  - qla2xxx: Skip allocating fcport if ct allocation fails.
  - qla2xxx: Fix reported supported link speeds.
  - qla2xxx: Add context to FEC state logs.

  - 8.07.00.53.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11, XS65, XS70:
  - extras: Fix build.sh remove of driver/module.
  - qla2xxx: Add ability to autodetect SFP type.
  - qla2xxx: Simplify qla2x00_get_host_fabric_name().
  - qla2xxx: Replace calls to __constant endian macros.
  - qla2xxx: Fix indentation whitespacing.
  - qla2xxx: Remove space at end of debug print.
  - qla2xxx: Correction to spelling of "identifier".
  - qla2xxx: Refactor ct req/rsp struct to mirror FC-GS specification.
  - qla2xxx: Implicitly inline struct ct_sns_gid_pt_data.
  - qla2xxx: Minor simplify/cleanup of configure fabric/loop routines.
  - qla2xxx: Simplify min_link_speed and max_speed_sup sysfs interfaces.
  - qla2xxx: Remove potential macro parameter side-effect in ql_dump_regs().
  - qla2xxx: Add log message to indicate FEC state.
  - qla2xxx: Make fwdt function call array static.
  - qla2xxx: fwdt skip entry for zero queue count for t263/t274.
  - qla2xxx: Reduce debug logs on 27xx fwdump.
  - qla2xxx: Print fwdump flags at end of fwdump.
  - qla2xxx: Convert fwdump length difference to size_t.
  - qla2xxx: Add endianizer macro calls to fc host stats.
  - qla2xxx: Add correction to fc host stats.

  - 8.07.00.52.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add support for Quail firmware.

  - 8.07.00.51.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add LR distance support from nvram bit.
  - qla2xxx: Add support for fabric priority per target.
  - qla2xxx: Add timeout ability to wait_for_sess_deletion().
  - qla2xxx: Fix ql_dump_buffer (avoid emitting on multiple lines).
  - qla2xxx: Move logging default mask to execute once only.
  - qla2xxx: Print correct mailbox registers in failed summary.
  - qla2xxx: Allow SNS fabric login to be retried.
  - qla2xxx: Correction to vha->vref_count timeout.
  - qla2xxx: Process AEN 0x8200 for CNA cards only.
  - qla2xxx: Test elreq.options for CNA only.
  - qla2xxx: Use sp->free instead of hard coded call.
  - qla2xxx: Prevent sp->free null pointer dereference.
  - qla2xxx: Free sp after marking not busy.
  - qla2xxx: Increase the login retry count to 30.
  - qla2xxx: Properly calculate fwdump buffer size.

  - 8.07.00.50.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: fix path recovery.

  - 8.07.00.49.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Prevent null pointer dereference of ctx.
  - qla2xxx: Allow fwdump template T262 to specify same start/end.
  - qla2xxx: Reduce excessive debug print during 27xx fwdump.
  - qla2xxx: Add test to avoid processing non-RDP ELS requests.
  - qla2xxx: Avoid crashing on null cred pointer in exit_creds().
  - extras: Consolidate help text into here-is redirection.
  - extras: Fix build.sh (cleanup and optimize).
  - qla2xxx: Avoid repeated fwdumps on AEN8017.
  - qla2xxx: Fix name server relogin.
  - qla2xxx: Use wait queue for vha->vref_count timeout.
  - qla2xxx: Fix mbx pointer error in classic fwdump.
  - qla2xxx: Replace instances of sp->fcport->vha with sp->vha.

  - 8.07.00.48.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add support for minimum link speed.

  - 8.07.00.47.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Simplify sp->done() and sp->free() interfaces.
  - qla2xxx: Replace sp->fcport->vha context with simpler sp->vha.
  - qla2xxx: Use sp->vha context in function qla2x00_rel_sp().
  - qla2xxx: Use sp->vha context in calls to sp->free().
  - qla2xxx: Use sp->vha context in calls to sp->done().
  - qla2xxx: Add vha field of appropriate type to struct srb.

  - 8.07.00.46.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Simplify printk format for portid's.
  - qla2xxx: Minor corrections to indent/whitespace.
  - qla2xxx: Minor corrections and missing additions.
  - qla2xxx: Allow port resync after isp reset.

  - 8.07.00.45.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Add check for different type of RSCN.
  - qla2xxx: Remove temporary fix PRE_UNLOADING bit.
  - qla2xxx: Schedule board_disable only once.
  - qla2xxx: Fix improper fcport_count accounting.
  - qla2xxx: Fix slow mem alloc behind lock.
  - qla2xxx: Fix deadlock.
  - qla2xxx: Tweak loop up.
  - qla2xxx: Relogin retweak.
  - qla2xxx: Fix sess deletion deadlock.
  - qla2xxx: Add wait for session remove on unload.
  - qla2xxx: Move login/logout decision making out of Full Fabric Scan.
  - qla2xxx: Add discovery event handling.
  - qla2xxx: Add async session creation.
  - qla2xxx: Add async sess update.
  - qla2xxx: Add async Get Port Database MB.
  - qla2xxx: Add async Get Name List MB.
  - qla2xxx: Add async GPNID.
  - qla2xxx: Add async GPSC.
  - qla2xxx: Add async GID_PN.
  - qla2xxx: Add support routines to search for fcport.
  - qla2xxx: Consolidate argument list for CTPassthru.
  - qla2xxx: Commonize alloc & free of fcport struct.
  - qla2xxx: Fix pass wrong argument in sp done.

  - 8.07.00.43.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Provide separate RDP enable (ql2xrdpenable).
  - extras: Fix hash-bang (#!) line to specify /bin/bash in build.sh.

  - 8.07.00.42.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Remove all DIX-0 references.

  - 8.07.00.41.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Disable setting module parameter ql2xenabledif.
  - qla2xxx: Correct supported FC speed for sysfs.
  - qla2xxx: Correct supported FC speed for FDMI/RDP.

  - 8.07.00.40.xx.y-k
  RHEL7, RHEL6, SLES12, SLES12.2, SLES11.3, XS65, XS70:
  - qla2xxx: Correct RDP Optical Product Descriptor Revision field.
  - qla2xxx: Remove macro parameter side effect in host_to_fcp_swap().

  - 8.07.00.39.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11.3, XS65, XS70:
  - qla2xxx: Fix duplicate message id.
  - qla2xxx: Disable adapter and skip error recovery when register disconnect.
  - qla2xxx: Separate ISP type bits out from device type.
  - qla2xxx: Correction to function qla26xx_dport_diagnostics().

  - 8.07.00.38.xx.y-k
  RHEL7, RHEL6, SLES12, SLES11.3, XS65, XS70:
  - qla2xxx: Add support to handle Loop Init error Asynchronus event.
  - extras: add option to log.sh to show available debug/log categories.
  - qla2xxx: Let DPORT be enabled purely by nvram.
  - qla2xxx: Add bsg interface to support statistics counter reset.
  - qla2xxx: Add bsg interface to support D_Port Diagnostics.

  - 8.07.00.37.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Check for device state before unloading the driver.
  - qla2xxx: Bump vendor fdmi version.
  - qla2xxx: Properly reset firmware statistics.
  - qla2xxx: Properly initialize IO statistics.
  - qla2xxx: Reduce RDP payload size if requesting port not logged in.
  - qla2xxx: Reject RDP request if requesting port is not logged in.
  - qla2xxx: Unswap high/low RDP optical descriptor alarms/warnings.
  - qla2xxx: Add method for obtaining RDP buffer credit descriptor.
  - qla2xxx: Make corrections/cleanups/improvements to RDP routine.
  - qla2xxx: Include ISP27xx in RDP/purex driver intercept.
  - qla2xxx: Make debug buffer log easier to view.
  - qla2xxx: Add module parameter alternate/short names.

  - 8.07.00.36.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.

  - 8.07.00.35.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Shutdown board on thermal shutdown aen.
  - qla2xxx: Correct RDP optical element array index.
  - qla2xxx: Log only failure case message for abort command.
  - qla2xxx: Add ram area DDR for fwdump template entry T262.
  - qla2xxx: Correction to RDP extensions transgression flags.
  - qla2xxx: Remove sysfs node fw_dump_template.
  - qla2xxx: Argument to le32_to_cpus() should be a pointer.
  - qla2xxx: Fix mbx_reg pointer iterator in 25xx fwdump routine.
  - extras: Inline log.sed into log.sh

  - 8.07.00.34.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Add support to disable laser for ISP27XX.
  - qla2xxx: Add RDP extensions.
  - qla2xxx: Set relogin flag when we fail to queue login requests.
  - qla2xxx: Fix default value descriptions for module parameters.
  - qla2xxx: Enable T10-DIF for ISP27XX.
  - qla2xxx: Use valid BBCR offset and datatype.
  - Revert "qla2xxx: Set echo test mailbox command option bit15 correctly."

  - 8.07.00.33.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - extras: Improve qlssen.sh usage.
  - qla2xxx: Provide mbx info in BBCR data after mbx failure
  - qla2xxx: Set echo test mailbox command option bit15 correctly.
  - qla2xxx: Correct FDMI vendor port state value.

  - 8.07.00.32.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - Revert "qla2xxx: Set priority for mailbox commands."
  - Revert "qla2xxx: Flush mailbox commands after timeout."

  - 8.07.00.31.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Avoid side effects when using endianizer macros.
  - qla2xxx: Fix warnings reported by static checker.
  - qla2xxx: Fix printks in ql_log message.
  - qla2xxx: Fix printk in qla25xx_setup_mode.
  - qla2xxx: Fix busy wait regression.
  - qla2xxx: Fix race in handling rport deletion during recovery causes panic.
  - qla2xxx: Set priority for mailbox commands.
  - qla2xxx: Flush mailbox commands after timeout.
  - extras: Add script to enable/disable vendor fdmi (and rebuild initrd image).

  - 8.07.00.30.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Add support for Private link statistics counters.
  - qla2xxx: Add support for buffer to buffer credit value for ISP27XX.
  - qla2xxx: Add support for online flash update for ISP27XX.

  - 8.07.00.29.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - extras: Script for extracting all logs/debugs from driver source
  - qla2xxx: Defer marking device lost when receiving an RSCN.
  - qla2xxx: Convert stray printk's in qla_nx.c to ql_log's.
  - qla2xxx: Allow fw to hold status before sending ABTS response.
  - qla2xxx: Seed init-cb login timeout from nvram exclusively.
  - qla2xxx: Remove unneeded link offline message.
  - qla2xxx: Fix couple of small typos in qla2xxx module code.
  - qla2xxx: Qualify ELS RDP mapping for ISP25xx and ISP26xx only.
  - qla2xxx: Restructure RDP routine to handle failure cases.
  - qla2xxx: Reduce multiple FDMI routines into a single routine.
  - qla2xxx: Simplify debug prints of wwnn, wwpn, and port id.
  RHEL7, SLES12:
  - qla2xxx: Avoid asynchronous abort requests.

  - 8.07.00.28.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Fix endianess of fdmi smartsan security support field.
  RHEL7:
  - qla2xxx: Reduce target mode performance hit in ISR.

  - 8.07.00.27.xx.y-k
  RHEL7:
  - qla2xxx: Avoid crossing initiator/target modes during AEN handling.

  - 8.07.00.26.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Set smartsan security support to 1.
  - qla2xxx: Add support for ISP2271.
  - qla2xxx: Fix missing device login retries.
  - qla2xxx: do not clear slot in outstanding cmd array.

  - 8.07.00.25.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Remove decrement of sp reference count in abort handler.
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - extras: Fix whitespace in .sh files.

  - 8.07.00.24.xx.y-k0
  RHEL5
  - Update 24xx/25xx firmware to version 8.01.00.

  - 8.07.00.24.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Do not crash system for sp ref count zero.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  - qla2xxx: Don't reset ISP when error entry with out of range handle.
  - qla2xxx: Add support for MPI and PEP FW version for ISP 27xx.

  - 8.07.00.23.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Fix RPD response missing fabric name
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: fix porting changes for SmartSAN
  RHEL5:
  - qla2xxx: Fix Link Service Request payload word 0.
  - qla2xxx: Cleanup and Silence unnecessary PUREX/RDP printouts.

  - 8.07.00.22.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Allow RPRT to work with all switches (mgmt srvr loopid).
  - qla2xxx: Use physical port for sending RPRT command.
  - qla2xxx: Use correct macro for SFP flags.
  - qla2xxx: Add adapter checks for FAWWN functionality.
  - qla2xxx: Update default Hostname.
  RHEL5:
  - qla2xxx: Corrections to FDMI registering routines.
  - qla2xxx: Corrections to FDMI processing routines.
  - qla2xxx: Corrections ro PUREX/RDP proessing.

  - 8.07.00.21.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: additional fdmi_register() attempt.
  - qla2xxx: Fix missing SFP flags from RDP Payload.
  - qla2xxx: driver fails to detect 4G adapters.
  - qla2xxx: Pause risc before manipulating risc semaphore.
  - qla2xxx: Use ssdid to gate semaphore manipulation.
  - qla2xxx: Handle AEN8014 incoming port logout.
  - qla2xxx: Add serdes register read/write sysfs support for ISP25xx.

  - 8.07.00.20.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Trigger FDMI registration for RPRT.
  - qla2xxx: Remove SmartSAN attributes from the RDP payload.
  - qla2xxx: Allow FDMI Hostname registration during boot.
  - qla2xxx: Updated Active FC4 port type.

  - 8.07.00.19.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: FDMI RDP command support.
  - qla2xxx: Support for FDMI Smart SAN Mamangement commands
  UEK2:
  - qla2xxx: Fix wrongly report "PCI EEH busy" when get_thermal_temp.

  - 8.07.00.18.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
  - qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
  - qla2xxx: Add serdes read/write support for ISP27XX
  - qla2xxx: Don't reset ISP when we receive an error entry with an out of range handle.
  - qla2xxx: Do not crash system for sp ref count zero
  RHEL7.x, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
  - qla2xxx: Disable Interrupt handshake for ISP27XX.
  - qla2xxx: Add debugging info for MBX timeout.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  RHEL7.x, SLES12, XS 6.5:
  - qla2xxx: Add support for Legacy and MSI interrupt modes.
  RHEL7.x:
  - qla2xxx: Fix compiler issue for FC_PORTSPEED_32GBIT on RHEL 7.1


  - 8.07.00.17.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Add udev notification to save fw dump for ISP27XX.
  - Add message for sucessful FW dump collected for ISP27XX.
  - Add fix for beacon for ISP27XX.
  - Increase the wait time for firmware to be ready for P3P.
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Disable FCE and FET tracing for ISP27XXX.
  - Add support to load firmware from file for ISP 26XX/27XX. 
  RHEL7, SLES12, XS 6.5:
  - Fix crash due to wrong casting of reg for ISP27XX.

  - 8.07.00.16.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Mark port lost when we receive an RSCN for it.
  - Disable PCI device in shutdown handler.
  - Fail adapter initialization on load ram failure.
  - Move warning message to debug level.
  - Restore WWPN from flash when cable pulled for FA-WWPN port.

  - 8.07.00.15.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS:
  - Restore WWPN in case of Loop Dead.
  - Honor FCP_RSP retry delay timer field.
  - Add missing ISP27xx checks to optrom code.
  - Force use of mailbox interface for flash access commands for ISP27xx.
  - Fix mismatch is checks to free sysfs nodes.
  - Disable laser for ISP2031 while unloading driver.
  - Enable DPORT using NVRAM parameters.
  RHEL5:
  - Disable FDMI by default.
  - Fix FW dump issue for ISP82XX. 
  - Add 25xx firmware version 7.05.00.

  - 8.07.00.14.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Add fix in driver unload for pending activity.
  - Allow user to change ql2xfdmienable value.
  - Declaration error cause stack corruption.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Fix duplicate log message ID.
  - Fix driver version string message.
  RHEL7, RHEL6, SLES11, UEK, XS:
  - Unload of qla2xxx driver crashes the machine.
  RHEL5:
  - Enable FDMI by default. 
  - Add 24xx/25xx firmware version 7.04.00.

  - 8.07.00.13.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Remove restriction on starting remote device discovery on port update.
  - Allow nvram bit to enable FA-WWN.
  - Allow nvram bit to enable D-PORT.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Move mailbox failure messages to a default debug level.

  - 8.07.00.12.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Correction to FA-WWN for un-acquiring portname.
  - Add scatter/gather table size module parameter.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add ql2xasynclogin module parameter.
  RHEL5:
  - For netlink response use respective sender's unique pid.

  - 8.07.00.11.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix incorrect debug printk.
  - Add D-Port functionality.
  - Add FA-WWN functionality.
  - Add FDMI-2 functionality.
  - ISPFx00 unexpected resets during adapter boot sequence.
  - Incorrect linked list semantic in qlafx00_get_fcport().
  - Add unknown parameter error handling to build.sh.

  - 8.07.00.10.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix potential return count bug in qla2xxx_get_vpd_field().
  - ISPFX00 avoid writing semaphore register in request_irqs().
  - ISP27xx fwdump template error print simplification.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - ISP25xx multiqueue shadow register crash fix.
  - Correction of debug level in mailbox command print 0x1111.

  - 8.07.00.09.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Enable fast flash access for ISP83xx.
  - Do logins from chip reset in DPC thread instead of error handler thread.
  - Remove wait for online from host reset handler.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx fwdump add tests for incomplete template.
  - ISP27xx fwdump optimize template entry table lookup.
  - ISP27xx fwdump add template entry T275 (insert buffer).
  - ISP27xx fwdump template remove high frequency debug logs.
  - ISP27xx fwdump template fix insertbuf() routine.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add endianizer to T10 PI max_payload_size modifier.
  RHEL5, SLES10:
  - Allow ELS commands with variable size command/data.
  RHEL5:
  - Add 24xx/25xx firmware 7.03.00.

  - 8.07.00.08.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Add MBC option for fast SFP data access.
  - Remove ISP8044 from pci table.
  - Revert "Change default capture to firmware defined capture mask".
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Remove mapped vp index iterator macro dead code.
  RHEL5:
  - Add shutdown callback handler.

  - 8.07.00.07.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.
  - Reduce the time we wait for a command to complete during SCSI error handling.
  - Delay driver unload if there is any pending activity going on.
  - Don't check for firmware hung during the reset context for ISP82xx.
  - Fix beacon blink logic for ISP26xx/83xx.
  - Add mention of RHEL7 and SLES11.3 in README.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx firmware dump template spec updates (including T274).
  - ISP27xx queue index shadow registers.
  - Fix ISPFx00 not displaying the correct FW version after FW update through sysfs Interface.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Clear loop_id for ports that are marked lost during fabric scanning.
  - Fixup looking for a space in the outstanding_cmds array in qla2x00_alloc_iocbs().

  - 8.07.00.06.xx.y-k
  RHEL7, RHEL6, SLES11, SLES10, UEK, UEK2, XS:
  - Avoid escalating the SCSI error handler if the command is not found in firmware.
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Change default capture to firmware defined capture mask.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Adjust adapter reset routine to the changes in firmware specification for ISPFx00.

  - 8.07.00.05.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, XS:
  - Add #if around printk_ratelimit to fix build issue on RHEL 6.
  - Add 'sparse_endian' command line option to build.sh
  - Fix build errors related to invalid print fields on some architectures.
  - Poll during initialization for ISP25xx and ISP83xx.
  - Add target mode definitions [SLES 11 SP3 specific].
  - ISP8044 ipmdio bus timeout improvement.
  - Remove configure VFs mailbox command call.
  - Use proper log message for flash lock failed error for ISP82XX.
  - IOCB data should be copied to I/O mem using memcpy_toio.

  - 8.07.00.04.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, Citrix:
  - Add sparse command line option.
  - Add 8044 serdes bsg interface.
  - Correction to 27xx template entry types 256 and 258.
  - Track the process when the ROM_LOCK failure happens.
  - Introduce fw_dump_flag to track fw dump progress.
  - Remove unnecessary code from qlafx00_intr_handler.
  - Enable fw_dump_size for 8044.
  - Update entry type 270 to match spec update for 27xx.
  - Change copyright year to 2014 in all the source files.
  - Remove unnecessary delays from fw dump code path.
  - Use jiffies instead of time.
  - Decrease pci access for response queue processing for ISPFX00.
  - Use proper log message for flash lock failed error.
  - Include <delay.h> file for msleep declaration in qla_nx2.c.
  - Correct the port no assignment for ISP82XX.
  RHEL5:
  - Add 24xx/25xx/81xx/83xx FC and FCoE Firmware 7.02.00.
  - IOCB data should be copied to I/O memory using memcpy_toio().
  - Use the physical port for all loopback operations.

  - 8.07.00.03.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Wait for reset completion without lock for ISPFX00.
  - Add pci device id 0x2271.
  - Add pci device id 0x2071.
  - Fix Task Management command asynchronous handling
  - Add IOCB Abort command asynchronous handling
  - Do not schedule reset when one is already active when receiving an invalid status handle.
  - Add and use 32Gbps FC-GS definitions.
  - Correct operations for ISP27xx template types 270 and 271.
  - Fix sparse warnings in qla_mr.c
  - Allow 83XX and 27XX both to write req_q_out register.
  - Correct 83xx/27xx mislogic in setting out_mb in qla25xx_init_req_que().
  - Check for peg alive counter and clear any outstanding mailbox command.
  - Log when device state is moved to failed state.
  - Issue abort command for outstanding commands during cleanup when only firmware is alive.
  - Support of new Helga minidump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
  - Allow the next firmware dump if the previous dump capture fails for ISP8044.
  - Add build.sh commandline option help/description to README file.

  - 8.07.00.02.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Allow ISP83xx and ISP27xx to use read/write remote register.

  - 8.07.00.01.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, UEK2/R3, Citrix:
  - Remove pci device id ISP2071.

  - 8.07.00.00.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Add support for ISP2701.
  - Remove Marker type IOCB logic for ISPFX00.
  - Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec
  - Add BE support for ISPFX00.
  - Avoid poisoining in the response queue for ISPFX00.
  - Simplyfy the ISPFX00 interrupt handler code for ISPFX00.
  - Optimize the response queue processing for ISPFX00.
  RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix:
  - Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for Helga.
  - Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  UEK2/R3:
  - Clear drv active before removing the host.
  - Wait for reset completion without lock for ISPFX00.

  - 8.06.00.13.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Add mutex around optrom calls to serialize accesses.
  - Add handling for boot indication progress AENs
  - Replace constant value for IOCTL IOCB abort execution status with a macro.
  - Enable the Flash Access Control (FAC) mailbox command.
  - Use proper message for Non owner reset ACK Timeout.
  - Remove init control block related dead code for ISPFX00.
  - Select correct request queue for error type IOCB for ISPFX00.
  - The file README.qla2xxx does not mention SLES11.3 (or later).
  - Fix warning reported by smatch.
  - Properly handle 32 bit mailbox register for ISPFX00.
  - Set host can_queue value based on available resources.

  - 8.06.00.12.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Assign the correct pointer to the sp->ctx in abort context for ISPFx00 (BZ8627).
  - Obtain adapter model description from vpd (SLES10 only) (ER105124).
  - Use scnprintf() instead of snprintf() in the sysfs handlers.
  - Only complete dcbx_comp and lb_portup_comp for virtual port index 0.
  - Reset nic_core_reset_owner on moving from COLD to READY for ISP8044 (ER111788).
  - Revert "qla2xxx: Remove entry in outstanding_cmds array if we fail to abort a request."
  - QLAFX00 Replace a constant with a macro definition for host->canqueue assigmnment.

  - 8.06.00.11.xx.y-k (RHEL5 only)
  - Iterate the correct list for remote port removal.
  - Honor FCPORT_UPDATE_NEEDED dpc flag for all ISPs.
  - Don't set NPIV_CONFIG_NEEDED and RELOGIN_NEEDED flag for ISPFX00.

  - 8.06.00.10.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix):
  - Remove entry in outstanding_cmds array if we fail to abort a request.
  - Clear RISC INT reg only for an event and not always while polling.
  - Fix undefined behavior in call to snprintf().

  RHEL6, SLES11, UEK, Citrix:
  - Add BSG interface for read/write serdes register.
  - Fix request queue null dereference.
  - Disable adapter when we encounter a PCI disconnect..
  - Refactor shutdown code so some functionality can be reused.
  - QLAFX00 Fix issue with not displaying node name after system reboot.
  - Add changes to obtain ISPFX00 adapters product information.
  - Add IOCTL command abort logic for ISPFX00.

  RHEL5, SLES10:
  - Add netlink interface for read/write serdes register.
  - Fix udev fwdump rules.

  RHEL5:
  - Update 8G and 4G firmware to version 7.01.00.

  README:
  - Updated for builing kernel with out-of-box driver for Boot-from-SAN.
  - Updated for building ramdisk with rpm driver for Citrix Boot-from-SAN.

  - 8.06.00.09.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Honor execute firmware failures.
  - Add BPM support for 25xx.
  - Disable INTx interrupt for ISP82XX.
  - Correctly set mailboxes for extended init control block.
  - Duplicate luns instantiated after doing ISP reset.
  - Don't consider the drivers knocked out of IDC participation for future reset recovery process.
  - Change message displaying fcport pointer to port id.
  - Fix the sparse C=2 warnings for ISP8044.
  - Revert "qla2xxx: Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX."
  - Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."
  - Print proper QLAFX00 product name at probe.
  - Fix compile warnings in qlafx00_build_scsi_iocbs() on BE platforms.
  - Unloading driver crashes server due to not freeing sp pool (SLES10 only).
  - Update 8G and 4G firmware to 7.0.2. (RHEL5 only).

  - 8.06.00.08.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fixups for ISP8044 beacon blink.
  - Select link initialization option bits from current operating mode.
  - Move queue depth ramp down message to i/o debug level.
  - Correctly reset Graceful Reset Bit in IDC Driver Control Register.
  - Add a new interface to update versions.
  - Correctly print out/in mailbox registers.
  - Add #if preprocessor statements to get driver compiled on UEK2 and R3.

  - 8.06.00.07.xx.y-k (RHEL5 only)
  - Set the timeout value to 45 for IOCTL commands for ISPFx00.
  - Dump IOCB on IOCTL command timeout for ISPFx00.
  - Allocate outstanding cmd array and request queue under single hardware lock.

  - 8.06.00.06.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the reset owner on ready and failed state for ISP8044.

  - 8.06.00.05.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the idc control graceful bit for ISP8044 after initialization.
  - Don't check for firmware hung during the reset context.
  - Add loopback IDC-TIME-EXTEND aen handling support.
  - Clear presence bit for ISP8044 on unload and error.
  - Move Previous version info message to debug level.

  - 8.06.00.04.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Properly set the tagging for commands.
  - Get the mpi version for ISP8044.
  - Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  - Implementation of flash write buffer mode for ISP8044.
  - Helga loopback support.
  - Add pex-dma support for faster minidump capture on ISP8044.
  - Collect minidump for ISP8044 using sysfs.
  - Perform context reset instead of chip reset for ISP8044 host reset.
  - Don't the set nic_core_reset_owner flag for ISP8044.
  - Set IDC graceful reset and don't capture minidump if it is set.
  - Honor return value from qla82xx_device_state_handler() in qla82xx_abort_isp().
  - Silent noisy message during ISP8044 dump collection.
  - Correct debug print id's.
  - Add 8044 entry in udev rules.
  - Set default critical temperature when ISPFX00 firmware doesn't provide it.
  - QLAFX00 make over-temp AEN informational, add log for normal-temp AEN.
  - Correct Interrupt Register offset for ISPFX00
  - Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  - Send all AENs for ISPFx00 to above layers.

  - 8.06.00.03.xx.y-k (RHEL6, SLES11, RHEL5, UEK, Citrix)
  - Add changes in initialization for ISPFX00 cards with BIOS.
  - Add changes to support extended IOs for ISPFX00.

  - 8.06.00.02.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - ISP8044 abort isp.
  - Helga Flash Write.
  - Helga legacy pin based interrupt support.
  - Get all the optrom sysfs attributes for CNA.
  - Add ISP8044 to MIDTYPE macro.
  - Fix sparse warning reported for qla_nx2.c.
  - Helga Remove hardcoded return values by QLA_FUNCTION_FAILED.
  - Remove minidump and reset code if FCoE is not a owner.
  - Helga fcoe_nic_reset_owner updated.
  - Fix compilation issue on ia64.
  - Fix for serial_num not getting displayed via sysfs.
  - Add missing FCP statistics to sysfs interface.

  - 8.06.00.01.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Set VPD Size to 1K for ISP82XX, ISP8044, ISP8031 (ER107011).
  - Helga call flash recovery function from bootstrap code.
  - Clear the MBX_INTR_WAIT flag when the mailbox time-out happens.
  - Drop redundant log message when ROM lock failure happens during retries.
  - To update Helga minidump template capture.
  - Make log message that prints when a completion status requires a port down more readable.
  - Reconfigure thermal temperature.
  - Add setting of driver version string for vendor application.
  - Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.

  RHEL6, SLES11, UEK, Citrix:
  - Set the index in outstanding command array to NULL when cmd is aborted when the request timeout (ER107084).

  - 8.06.00.00.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fix for locking issue between driver ISR and mailbox routines.
  - Do not take a second firmware dump when intentionally generating one.
  - Move qla2x00_free_device to the correct location.
  - Add support for ISP8044.
  - Update firmware link in Kconfig file.
  - Perform coverity analysis from build.sh

  RHEL6, SLES11:
  - Correct multiqueue offset calculations.
  - Add module parameter for interrupt mode.
  - Fix incorrect test after list_for_each_entry() exits.
  - Do not query FC statistics during chip reset.

  RHEL5, SLES10:
  - Use spinlock while accessing vport list.

  SLES10:
  - Correction of operator in udev rules.

  - 8.05.00.03.xx.y-k (RHEL6, SLES11), 8.04.00.15.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add clarifying printk to thermal access fail cases.

  RHEL5, SLES10:
  - Move list add of ha to non-error section of probe_one.

  - 8.05.00.02.xx.y-k (RHEL6, SLES11), 8.04.00.14.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Revert "qla2xxx: Add setting of driver version string for vendor application."

  RHEL6, SLES11, UEK, Citrix:
  - Debug ID corrections.
  - Add iounmap(ha->cregbase) calls for ISPFX00 adapters for proper driver cleanup during load / unload.
  - Clear the outstanding command array for task management processing for ISPFx00.
  - Remove Request / Response transfer error AENs handling from qlafx00_async_event().
  - Proper cleanup of BSG request when the request time-out on ISPFx00.
  - Fix issue with calling sp_done() twice for task management commands.
  - Fix bug in cont_entry handling for the cases when FW provides more data than mid layer can handle.
  - Correction to structure size while registering host information with firmware.

  RHEL5, SLES10:
  - Use vp_list field of scsi_qla_host while traversing virtual ports list.

  - 8.05.00.01.xx.y-k (RHEL6, SLES11.x), 8.04.00.13.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add setting of driver version string for vendor application.
  - Integrate generic card temperature with mezz card temperature.
  - Correction of comment in MBC opcode defines.
  - Wait for IDC complete event to finish loopback operation.
  - Don't process state change aen for reset owner.
  - Don't process RSCNs for a vport on the same physical adapter.
  - Correct list-iteration bug in Report-ID Acquisition codes.

  RHEL6, SLES11:
  - Addedd logic to monitor aenmbx0 register for fixed intervals on ISPFx00.
  - Remove unnecessary operations from qlafx00_soc_cpu_reset() and
  add resetting IRQ ack register per core.

  RHEL5, SLES10:
  - Return -EINVAL when setting up loopback operation.

  RHEL5:
  - Inclusion of 8G firmware version 5.09.00.
  - Inclusion of 4G firmware version 5.09.00.

  - 8.05.00.00.xx.y-k (RHEL6.x and SLES11.x)
  - Enhancements to support ISPFx00.

  - 8.04.00.12.xx.y-k
  - Update the copyright information.
  - Display the lock owner on lock acquire failure.
  - Move loopback mode reset after chip reset check.
  - Extra loopback error handling for ISP83xx.
  - Do link initialization on get loop id failure.
  - Do MPI reset only for 81xx.

  V2632 (RHEL 6.x, SLES 11.x, Citrix 6.0, UEK):
  - Revert "qla2xxx: Optimize existing port name server query matching."
  - Revert "qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
  - Don't free pool that wasn't allocated.
  - Unload hangs after issuing BSG commands to vport.

  Citrix 6.0:
  - Create initrd as a part of installation and removal of the driver rpm.
  - RPM install should install driver under extra instead of driver directory.

  RHEL 5.x, SLES 10.x:
  - MBA_IDC_NOTIFY case should fallthru.
  - Add fw_dump_size sysfs attribute file.
  - Add test for validity of virtual host in netlink interface.

  SLES 10.x:
  - Add 8031/2031 cases to request firmware.

  - 8.04.00.11.xx.y-k
  - Move marking fcport online ahead of setting iiDMA speed.
  - Add 16Gb/s case to get port speed capability.
  - Get VPD information from common location for CNA.
  - Don't clear drv active on iospace config failure.
  - Display that driver is operating in legacy interrupt mode.
  - Add "16" speed to link speeds array in qla2x00_iidma_fcport() function
  - Correct race in loop_state assignment during reset handling.
  - Reject loopback request if one is already in progress.
  - Update the FTP site references in the driver sources.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Obtain loopback iteration count from bsg request.
  - Parameterize the link speed string conversion function.
  - Update ql2xextended_error_logging parameter description with new options.
  - Fix typo in qla2xxx driver.
  - Free rsp_data even on error in qla2x00_process_loopback().
  - Avoid null pointer dereference in shutdown routine.

  RHEL 5.x:
  - Remove fabric_logout() calls from qla2x00_dev_loss_tmo_callbk() function.

  SLES10.x:
  - Clear local references of rport on device loss timeout notification from FC transport.

  - 8.04.00.10.xx.y-k
  - Honor status value of 2 for report-id acquisition.
  - Ignore driver ack bit if corresponding presence bit is not set.
  - Add Gen3 PCIe speed 8GT/s to the log message.
  - Acquire risc semaphore before resetting ISP.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Ramp down queue depth for attached SCSI devices when driver resources are low.
  - Determine the number of outstanding commands based on available resources.
  - Fix for kernel crash when external loopback diagnostic is run through BSG interface.
  - Fix coccinelle warnings in qla2x00_relogin.
  - Test and clear FCPORT_UPDATE_NEEDED atomically.
  - Use correct Request-Q-Out register during bidirectional request processing
  - Fix typo in qla83xx_fw_dump function.
  - Move noisy Start scsi failed messages to verbose logging level.
  - Fix for warnings reported by sparse.

  RHEL 5.x:
  - Inclusion of 4G/8G firmware version 5.08.00.
  - Log message when qla2xenablemsix module parameter is set to 2 (MSI mode) and adapter does not support MSI mode.
  - Revert "qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports"
  - Revert "qla2xxx: No fcport FC-4 type assignment in GA_NXT response."

  Citrix 6.x:
  - RPM build should hide the directory naming convention from user.

  - 8.04.00.09.xx.y-k
  - No fcport FC-4 type assignment in GA_NXT response.
  - Fix checkpatch error in qla2xxx_mctp_dump.
  - Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.
  - Clear unsupported 'states' during Get-FW-State queries.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Pass correct parameters while creating an initrd.
  - Remove spurious taking of ha->vport_slock spinlock.

  UEK:
  - Add macro for kernel extended version.

  RHEL 5.x:
  - Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports.
  - Pass correct parameters while creating an initrd.

  - 8.04.00.08.xx.y-k (RHEL 6.x, SLES 11.x, UEK and Citrix)
  - Correct loop_id_map allocation-size and usage.

  - 8.04.00.07.xx.y-k
  - Prefix qla2xxx with the dump file name.
  - Delay for legacy interrupts not required for all boards for ISP83xx.
  - Use correct logger path in udev scripts.
  - Allow MSI interrupt registration for ISP82xx.
  - Don't toggle RISC interrupt bits after IRQ lines are attached.
  - Fix for legacy interrupts for ISP83xx.
  - Restrict nic core reset to one function for mctp.
  - Update to Implementation of the mctp.
  - Enable fw attributes for ISP24xx and above.
  - Get fcal position map should not be called for p2p topology.
  - Set Maximum Read Request Size to 4K.
  - Enclose adapter related calls in adapter check in failed state handler.
  - Fix for handling some error conditions in loopback.
  - Fix description of qla2xmaxqdepth parameter.
  - Set idc version if function is first one to come.-
  - Do not restrict the number of NPIV ports for ISP83xx.
  - Do PCI fundamental reset for 83xx.
  - Fail initialization if unable to load RISC code.
  - Ensure PLOGI is sent to Fabric Management-Server upon request.
  - Remove setting Scsi_host->this_id during adapter probe.
  - Use #defines instead of hardcoded values for intr status.

  V2632 (RHEL 6.x, SLES 11.x and UEK):
  - Remove dumping fw on timeout for bidirectional commands.
  - T10 DIF - ISP83xx changes.
  - Fix incorrect status reporting on DIF errors.
  - Change log messages to dbg and remove dumping fw on timeout for bidirectional.
  - Use the right field for container_of.

  SLES10.x:
  - Correct implementation of qla2x00_get_idma_speed.
  - Remove check for ISPs other than ISP81xx from qla81xx_set_port_config

  RHEL5.x:
  - Add stubs for edc and edc_status interface.

  - 8.04.00.06.xx.y-k
  - Don't call nic restart firmware if it is already active and running.
  - Wrong PCIe (2.5Gb/s x8) speed in the kernel message for ISP82xx.
  - Perform ROM mbx cmd access only after ISP soft-reset during f/w recovery.
  - Fix rval may be used uninitialized in this function warning.
  - Implement beacon support for ISP83xx CNA.
  - Fix for continuous rescan attempts in arbitrated loop topology.
  - Only enable link up on the correct interrupt event.
  - Update the driver license.
  - Don't register legacy interrupts for ISP82xx.
  - Add bit to identify Sensei card for thermal temp.
  - Implementation of MCTP.
  - IDC implementation for ISP83xx.
  - Add FW DUMP SIZE sysfs attribute.
  - Implementation of bidirectional.
  - Use bitmap to store loop_id's for fcports.
  - Display mailbox failure by default.
  - Remove redundant NULL check before release_firmware() call.
  - Add check in qla82xx_watchdog for failed hardware state.
  - Add I2C BSG interface.
  - Use dracut to rebuild the initramfs on RHEL 6 in build.sh.
  - Don't call failed handler for default case.
  - Add hilda fc fcoe entries in the udev rules file.

  - 8.04.00.05.xx.y-k
  - Display proper firmware version when new minidump template is gathered for ISP82xx.
  - Properly check for current state after the fabric-login request.
  - Proper completion to scsi-ml for scsi status task_set_full and busy.
  - Don't capture minidump for ISP82xx on flash update from application.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Optimize existing port name server query matching.
  - Remove mirrored field vp_idx from struct fc_port.
  - Display proper supported speeds for 16G FC adapters.
  - Fix reset time out as qla2xxx not ack to reset request.
  - Stats should be different from physical and virtual ports.
  - Block flash access from application when device is initialized for ISP82xx.
  - Handle interrupt registration failures more gracefully.
  - Logic to detect overheat condition and fail ISP82xx.
  - Remove unneeded DPC wakeups from qla82xx_watchdog.
  - RHEL 5.x/SLES 10.x
  - Revert : IO failure during ISP82xx reset.
  - Revert : Avoid depending on SCSI host_lock in queuecommand function.

  - 8.04.00.04.55.6-k
  - 8.04.00.04.32.1-k
  - ISP83xx(16G FC) support for Xenserver 6.0 and Oracle UEK.

  - 8.04.00.04.xx.y-k
  - Remove resetting memory during device initialization for ISP82xx.
  - Proper detection of firmware abort error code for ISP82xx.
  - SLES10 SPx: Add udev script, udev rules file, kmdtool.
  - SLES10 SPx: Proper notification of device udev event for automatic gathering of firmware dump.

  - 8.04.00.03.xx.y-k
  - Correct link-reset regressions introduced during 83xx porting.
  - Avoid invalid request queue dereference for bad response packets.
  - Stop iteration after first failure in -_id functions.
  - Fix incorrect register access in qla2x00_start_iocbs().
  - Fix to update proper command completion upon command retries.
  - Hard code the number of loop entries at 128.
  - Reference proper scsi_qla_host structure for processing non-scsi SRB commands.
  - Handle device mapping changes due to device logout.
  - Fix wrong decrement, null sp access.
  - Initialize the command done routine.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Complete mailbox command timedout to avoid initialization failures during next reset cycle.
  - Add ha->max_fibre_devices to keep track of the maximum number of targets.
  - Cache swl during fabric discovery.
  - Remove EDC sysfs interface.
  - Perform firmware dump procedure on mailbox command timeout.
  - Change the log message when previous dump is available to retrieve for ISP82xx.
  - Remove check for null fcport from host reset handler.
  - Correct out of bounds read of ISP2200 mailbox registers.
  - Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
  - Reduce mbx-command timeout for Login/Logout requests.
  - Clear options-flags while issuing stop-firmware mbx command.
  - Add an "is reset active" helper.
  - Prep zero-length BSG data-transfer requests.
  - Perform implicit logout during rport tear-down.
  - Handle failure cases during fabric_login
  - Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
  - Add check for null fcport references in qla2xxx_queuecommand.
  - Handle change notifications based on switch scan results.
  - Use consistent DL mask for ELS/CT passthru requests.
  - Consolidation of SRB processing.


