Lenovo YUM Repository
Release and Change History
Lenovo YUM Repository
Release and Change History
| Bundle Release Information: |
| Targeted Server Family (Machine Type): ThinkSystem SR635 (7Y98, 7Y99) |
| Targeted Operating System: RHEL8.5 |
| YUM Repository Build Date: 2022_06_10 |
| Device: |
| ThinkSystem Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter |
 Device Product Guide |
Part Number: 4XC7A08239 Feature Code: na |
|||
|---|---|---|---|---|---|
| PCIe Sub Vendor ID: 0x17AA PCIe Sub Device ID: 0x4106 |
| Release History: |
| Release Change History Documents |
===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
This package updates the Broadcom Firmware Code to the levels shown under the
"Version" column for the products listed below :
ThinkSystem Adapters ASIC
---------------------------------------- --------
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter 5720
Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter 5719
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484) 5719
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482) 5720
ThinkSystem SR250 V2 / ST250 V2 5720
Firmware Version: 219.0.3.1-2
---------------------------
Problems Fixed:
- UEFI:
- CS00012203540/CTRL-55220: Bug 237813 : Broadcom NX1 5720 Sharknado2 shows incorrect UUID on XCC Inventory page
- CTRL-53890: Populate NCSI firmware version in hex format
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28
ISCSI Code 214.0.152
NCSI Code 1.5.30
MGMT_FW Code 1.12
===============================================================================
Change History
===============================================================================
Firmware Version: 219.0.2.1
---------------------------
Problems Fixed:
- UEFI:
- CTRL-54780: Add support for new LOM device IDs
- CTRL-54509: Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.25
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.4
---------------------------
Problems Fixed:
- UEFI:
- CS00012183815/CTRL-53571:Bug 229387:Broadcom 5719 NIC card physical port1 and port2 didn’t show correct Burned-in Address under XCC website inventory.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.22*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.3
---------------------------
Problems Fixed:
- UEFI:
- CS00012078093/CTRL-53225:Bug227078-[PA_LNV_AMD1P_Milan]SUT fail to install SLES12.5 OS and stop at "loading complete" with Qtester
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.21*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.2
---------------------------
Problems Fixed:
- UEFI:
- CS00012118110 - Bug 227988 - 5719 OCP - Unable to change settings in HII MBA Configuration menu
- CTRL-53239 - Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.20*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.1
---------------------------
Problems Fixed:
- UEFI:
- CS00011411798/Bug 214966 - [CFB_Milan][UEFI][BDS]A latency of five seconds when setup menus appears
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.17*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.4.1
---------------------------
Problems Fixed:
- APE FW:
- CTRL-51120: Report HW Arbitration implementation capability
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.4
---------------------------
Problems Fixed:
- APE FW:
- CTRL-50770: Side-band Traffic stop observed when running DC cycle stress
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix VersionName string for FMP
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix/update AIM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.7
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.2.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix MBA configuration saving issue
- Fix SN2 AIM data
- Fix various UCM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.6
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.7.1
---------------------------
Problems Fixed:
- Bootcode
- Add Aral port enable feature
- UEFI driver
- Fix port enablement issue
- Update default values
- FWupg tool
- Fix VPD V0 update area issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 21.6.4
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.1.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix iSCSI CHAP secret create issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.29
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix Port Enablement feature
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.25
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.1
---------------------------
Problems Fixed:
- UEFI driver
- Expose Port Enablement feature
- Observe MBA VLAN setting when no system VLAN ID
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.24
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.5
---------------------------
Problems Fixed:
- Updated UEFI driver with signed version
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.4
---------------------------
Problems Fixed:
- Updated UEFI driver
- To increase MTU size to accomodate VLAN packets
- Updated NCSI firmware
- To add changes to shutdown unused ports.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.3
---------------------------
Problems Fixed:
- Updated NCSI FW
- To support 5720 OCP 3.0 Pkg ID scheme
- Updated MBA Driver
- To remove unused Ctrl-K shortcut from MBA menu
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.17
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.2
---------------------------
Problems Fixed:
- Updated UEFI Driver
- To Fix AIM data
- Update FWUpg tool
- To Fix 5718 FW upgrade issue
- To Fix Error Handling problem
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.14
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.1
---------------------------
Problems Fixed:
- Added new IDs support
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.10
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.4.1
---------------------------
Problems Fixed:
- GA release for 19A. No FW changes.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.4
---------------------------
Problems Fixed:
- Updated legacy PXE ROM: Roll back legacy PXE ROM to work around runtime footprint too large issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.3
---------------------------
Problems Fixed:
- Updated uefi undi with signed driver
- Updated ncsi code to fix:
- only two ports on when AC first applied for 5719
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.2
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Some config options have no default values.
- Update bmapilnx to fix:
- Failed to update FW under SLES 15
- FW update stopped with "file is too big" error
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.8
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.1
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Update Firmware Bundle description.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.6
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.3
---------------------------
Problems Fixed:
- Updated bmapilnx to fix:
- Can't enumerate devices in SLES15.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.2
---------------------------
Problems Fixed:
- Updated UEFI UNDI driver to fix:
- Can't update Port Enablement HII option in ThinkSystem.
- Enhance HII formset title to include MAC address.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.1
---------------------------
Problems Fixed:
- Updated FW Upgrade Utilities to:
- Disable check for Fcode allowing removal if needed.
- Enable logging for command line mode.
- Updated UEFI UNDI driver to fix:
- Bogus "SMASH" entry appears in HII after LOM update.
- Fix for permanent MAC address reporting.
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.1.1
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.12.0
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
Problems Fixed:
Enhancements:
- Combined package for both ThinkSystem and System x products
===============================================================================
===============================================================================
Firmware Version: 20.6.4.3a
---------------------------
Boot Code
ASIC Version
---- -------
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.6.13
PXE Code 20.6.1
ISCSI Code 20.6.2
Problems Fixed:
Enhancements:
- Initial release of ThinkSystem adapters:
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484)
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482)
===============================================================================
===============================================================================
Firmware Version: 17.4.4.8-c
----------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Corrected an issue where the Permanent MAC Address reported via IMM may
be incorrect or duplicated
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.4.7a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.8
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Fixed issue with tx/rx flow control in shared nic mode where connection
to IMM is lost for a period of time after the server is powered off.
- Fixed issue with mac address filtering in shared nic mode where
connection to IMM is lost after a system reboot.
Enhancements:
- Added individual port enable/disable functionality in F1 Setup and
ASU/OneCLI for the following:
Adapters: NetXtreme I Quad Port GbE Adapter
Systems (LOMs): x3650 M5, x3550 M5, x3500 M5
===============================================================================
===============================================================================
Firmware Version: 17.4.4.2a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- Updated the firmware update tool, a bug was found where it would not
attempt to update package version 15.x.x code.
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.3.3a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- ASU or XClarity is not able to restore default ISCSi settings
(such as 0.0.0.0) for adapters 90Y9352 and 90Y9370
- Invalid ISCSI parameters detected with ASU or XClarity on adapter
49Y7900.
- Flex x220 does not provide correct UUID to BOFM.
- Updated permanent MAC address retrieval logic when reporting the
value to AIM.
- Update permanent MAC address retrieval logic when reporting value to
additional AIM fields.
- Updated driver to modify attribute pattern strings for OEM devices.
- Removed extraneous HII page which was causing OEM parameter
extraction utility to show improper configuration.
- Update permanent MAC address retrieval logic when reporting value to
AIM.
Enhancements: Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2022 Lenovo. All rights reserved |
===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
Firmware Version: 219.0.144.0
Problems Fixed:
- CS00012200316: CTRL-55046 NX-E sups change history does not list oldspice 57508 adapter
- CS00012197469:CTRL-54743/Bug 234965 - Broadcom 57454 OCP adapter bandwidth show incorrect under Linux OS
- (CTRL-54577) NVM banks not fully erased during initial creation or a subsequent relocation/resize
- (CTRL-54568) BMC loses MCTP communication after receiving MCTP Prepare For Endpoint Discovery command
- (CTRL-50025) Transmit timeout observed when running RoCE stress test
- (CTRL-54583) Add help text for Flow Offload to indicate it is supported on Linux DPDK only
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 219.0.112.0
PXE Code 219.0.13.0
UEFI Code 219.0.38.0
ISCSI Code 219.0.1.0
NCSI Code 219.0.83.0
RDMA FW 219.0.2.0
===============================================================================
Firmware Version: 219.0.103.0
Problems Fixed:
- CS00012186124:CTRL-54195/Bug 224059 - [PA_Agile_Sprint51 SDV_LXCA 3.2.0-38_SR850P]Fail to deploy sles15.2 by Broadcom NX-E PCIe 25Gb 1-Port adapter with 1G RJ45 SFP
- CS00012186346:CTRL-53895/Bug 226219 - Link issue with 57414 dual port connecting to Arista switch
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 219.0.90.0
PXE Code 219.0.13.0
UEFI Code 219.0.32.0
ISCSI Code 219.0.1.0
NCSI Code 219.0.68.0
RDMA FW 219.0.2.0
===============================================================================
Firmware Version: 218.0.197.6
Problems Fixed:
- CTRL-54073 CS00012187548: Bug 230926 - [PA_Abyss_SIT_IEC_Stress]System lost Broadcom 57508 card randomly during AC cycle via Qtester
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.197.4
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.197.2
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.197.4
Problems Fixed:
- CTRL-53126:CS00011901206-222716-The Qtester prompt failure message:"VPD/FW check failed Diff found"during AC cycle test to 64 loops under RHE8.2 OS
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.197.3
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.137.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.197.3
Problems Fixed:
- (CTRL-52682) Update CuW coredump decoder with the capability to parse a crashdump
- (CTRL-51492) [Thor WHQL] SDDC Premium failed on Windows 2019
- (CTRL-52613) Port 3 and port 4 link LEDs are on, when the ports are disabled from UEFI HII for Posh
- (CTRL-52190) P2100G: Link will not come up when switch is configured with AN+LT in UEFI
- (CTRL-52815) First port legacy iSCSI Boot configuration info used for all ports
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.197.2
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.137.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.182.0
Problems Fixed:
- (CTRL-52209) N2100G: port 0 led is on when switch is configured with AN+LT and there is no cable connected during BMC init
- (CTRL-51975) bnxtnvm install take a long time and can eventually fail
- (CTRL-51617) Allow host tools to modify MAC address
- (CTRL-51842) Exclusive access to specific host for hwrm secure cfg command based on build flag
- (CTRL-51752) FW install causes system crash
- (CTRL-51995) Populate the patch version for FW components in ver_get response
- (CTRL-51662) mismatching mtu setting causing transport timeout
- (CTRL-51067) FW error recovery occurs during FW install
- (CTRL-51699) Not able to link up with customer AoC PAM4 cable with switch port configured in 100G PAM4
- (CTRL-47848) The Temperature GPIOs behaves incorrectly on certain OCP3 NICs
- (CTRL-51476) CFW: Wh+ SUT stuck at boot after firmware upgrade
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.162.0
PXE Code 218.0.33.0
UEFI Code 218.0.70.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.132.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.129.16
Problems Fixed:
- CS00011624756:CTRL-51995:Bug 221573 - [PA_Storage_21A_SDV_Lenovo_BDC_AMD_Steel] The NCSI version& RDMA FW version of Ginger under UEFI HII is different with the .chg file
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.129.14
PXE Code 218.0.26.0
UEFI Code 218.0.129.3*
ISCSI Code 218.0.3.0
NCSI Code 218.0.129.6
RDMA FW 218.0.129.2
===============================================================================
Firmware Version: 218.0.129.15
Problems Fixed:
- CS00011480591:Bug 217731 - [PA_Anarky_SDV_IEC_Storage] Broadcom 57454 10GBASE-T 4-port OCP LED didn’t work after flash FW to 218.0.96.6(OSS:116011)
- CS00011476285:CTRL-51508 - Bug 218520 - [PA_Anarky_SDV_IEC_Storage] Broadcom 57508 100GbE QSFP56 2-port PCIe connector display "Unknown" in XCC Inventory
- CS00011525506:Bug 219322 - [21A BBFV-old spice] 200GbE should not be configurable in UEFI setting menu
- CS00011530447:CTRL-51633 - Bug 219255 - [oldspice bbfv] when npar is enabled, the first partition of each port has rdma disabled, all other ports are enabled
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.129.13
PXE Code 218.0.26.0
UEFI Code 218.0.129.3*
ISCSI Code 218.0.3.0
NCSI Code 218.0.129.6
RDMA FW 218.0.129.2
===============================================================================
Firmware Version: 218.0.120.0
Problems Fixed:
- (CTRL-50980) [218.0 Lenovo] Error recovery not working on Stratus adapter when VFs are created, hwrm errors seen after crashing fw, PF link goes down
- (CTRL-51119) Advertise HW arbitration capability correctly
- (CTRL-50025) Transmit timeout observed when running RoCE stress test
- (CTRL-49821) CS00010924757 - Bug 210132 - [PA_Europa_SDV_LNV_LXCA]Use the pattern change the Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter settings failed
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.109.0
PXE Code 218.0.22.0
UEFI Code 218.0.49.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.91.0
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.96.6
Problems Fixed:
- (CTRL-49547): Bug 211143 - Outage after broadcast storm with Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter
- (CTRL-50695): ESX failed to recover upon mbuf leak
- (CTRL-49888): Add a monitor scheme to check and notify driver if hw has disabled a rx or aggr ring
- (CTRL-48487): Display user friendly cos queue names in ethtool -S
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.96.4
PXE Code 218.0.18.0
UEFI Code 218.0.40.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.96.2
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.120.0
Problems Fixed:
- (CTRL-50980) [218.0 Lenovo] Error recovery not working on Stratus adapter when VFs are created, hwrm errors seen after crashing fw, PF link goes down
- (CTRL-51119) Advertise HW arbitration capability correctly
- (CTRL-50025) Transmit timeout observed when running RoCE stress test
- (CTRL-49821) CS00010924757 - Bug 210132 - [PA_Europa_SDV_LNV_LXCA]Use the pattern change the Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter settings failed
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.109.0
PXE Code 218.0.22.0
UEFI Code 218.0.49.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.91.0
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.96.6
Problems Fixed:
- (CTRL-49547): Bug 211143 - Outage after broadcast storm with Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter
- (CTRL-50695): ESX failed to recover upon mbuf leak
- (CTRL-49888): Add a monitor scheme to check and notify driver if hw has disabled a rx or aggr ring
- (CTRL-48487): Display user friendly cos queue names in ethtool -S
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.96.4
PXE Code 218.0.18.0
UEFI Code 218.0.40.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.96.2
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.81.0
Problems Fixed:
- None ; Adding Thor support into Lenovo 218.0 inital release
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00496) BCM957416M4161L
Broadcom NX-E PCIe 25Gb 1-Port SFP28 Ethernet Adapter (7ZT7A00505) BCM957412A4120L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Code Type Current
-----------------------------
Boot Code 218.0.71.0
PXE Code 218.0.15.0
UEFI Code 218.0.33.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.60.0
RDMA FW 218.0.1.0
__thor_adapter_list__
Code Type Current
-----------------------------
Boot Code 218.0.71.0
PXE Code 218.0.15.0
UEFI Code 218.0.33.0
Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2022 Lenovo. All rights reserved |