ThinkSystem Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter
Device Product Guide
Part Number: 4XC7A08239 Feature Code: AUZX
PCIe Sub Vendor ID: 0x17AA PCIe Sub Device ID: 0x4106
Broadcom NX-1 Ethernet Firmware Update for Linux (For Linux)
Broadcom NX-E Ethernet Firmware Update for Linux (For Linux)
Broadcom NX-1 Ethernet Device Driver for SLES15 (For Sles)
Broadcom NX-E Ethernet Advanced Device Driver Package for SLES15 (For Sles)
Broadcom NX-1 Ethernet Firmware Update for Linux (For Linux)
===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
This package updates the Broadcom Firmware Code to the levels shown under the
"Version" column for the products listed below :
ThinkSystem Adapters ASIC
---------------------------------------- --------
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter 5720
Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter 5719
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484) 5719
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482) 5720
ThinkSystem SR250 V2 / ST250 V2 5720
Firmware Version: 222.0.2.1
---------------------------
Problems Fixed:
- UEFI:
- DCSG01137975: Update controller name strings for certain OEM devices.
- DCSG01127765: Update diagnostics packet test to introduce a small delay when polling for RX packets.
- DCSG01154298: Fix Firmware Management Protocol.CheckImage failure for certain OEM devices.
- DCSG01158497: Support for enabling both RMII and SMBUS at a time
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.2
UEFI Code 21.6.36*
ISCSI Code 214.0.152
NCSI Code 1.5.35
===============================================================================
Change History
===============================================================================
Firmware Version: 221.0.3.1
---------------------------
Problems Fixed:
- UEFI:
- DCSG01129429/CS00012229530: Lenovo Config defaults for LOM design are not consistent
- DCSG01127815/CS00012228772: Bug 248910-NCSI doesn't work, can't switch to shared port, both of NIC "link speed" and "link status" are N/A in XCC WebUI
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.32
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 221.0.2.1
---------------------------
Problems Fixed:
- NCSI:
- CTRL-55381: NX1 FW support for 3-bit NCSI package ID
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.32
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 219.0.3.1
---------------------------
Problems Fixed:
- UEFI:
- CS00012203540/CTRL-55220: Bug 237813 : Broadcom NX1 5720 Sharknado2 shows incorrect UUID on XCC Inventory page
- CTRL-53890: Populate NCSI firmware version in hex format
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.30
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 219.0.2.1
---------------------------
Problems Fixed:
- UEFI:
- CTRL-54780: Add support for new LOM device IDs
- CTRL-54509: Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.25
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.4
---------------------------
Problems Fixed:
- UEFI:
- CS00012183815/CTRL-53571:Bug 229387:Broadcom 5719 NIC card physical port1 and port2 didn’t show correct Burned-in Address under XCC website inventory.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.22*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.3
---------------------------
Problems Fixed:
- UEFI:
- CS00012078093/CTRL-53225:Bug227078-[PA_LNV_AMD1P_Milan]SUT fail to install SLES12.5 OS and stop at "loading complete" with Qtester
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.21*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.2
---------------------------
Problems Fixed:
- UEFI:
- CS00012118110 - Bug 227988 - 5719 OCP - Unable to change settings in HII MBA Configuration menu
- CTRL-53239 - Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.20*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.1
---------------------------
Problems Fixed:
- UEFI:
- CS00011411798/Bug 214966 - [CFB_Milan][UEFI][BDS]A latency of five seconds when setup menus appears
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.17*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.4.1
---------------------------
Problems Fixed:
- APE FW:
- CTRL-51120: Report HW Arbitration implementation capability
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.4
---------------------------
Problems Fixed:
- APE FW:
- CTRL-50770: Side-band Traffic stop observed when running DC cycle stress
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix VersionName string for FMP
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix/update AIM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.7
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.2.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix MBA configuration saving issue
- Fix SN2 AIM data
- Fix various UCM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.6
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.7.1
---------------------------
Problems Fixed:
- Bootcode
- Add Aral port enable feature
- UEFI driver
- Fix port enablement issue
- Update default values
- FWupg tool
- Fix VPD V0 update area issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 21.6.4
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.1.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix iSCSI CHAP secret create issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.29
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix Port Enablement feature
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.25
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.1
---------------------------
Problems Fixed:
- UEFI driver
- Expose Port Enablement feature
- Observe MBA VLAN setting when no system VLAN ID
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.24
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.5
---------------------------
Problems Fixed:
- Updated UEFI driver with signed version
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.4
---------------------------
Problems Fixed:
- Updated UEFI driver
- To increase MTU size to accomodate VLAN packets
- Updated NCSI firmware
- To add changes to shutdown unused ports.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.3
---------------------------
Problems Fixed:
- Updated NCSI FW
- To support 5720 OCP 3.0 Pkg ID scheme
- Updated MBA Driver
- To remove unused Ctrl-K shortcut from MBA menu
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.17
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.2
---------------------------
Problems Fixed:
- Updated UEFI Driver
- To Fix AIM data
- Update FWUpg tool
- To Fix 5718 FW upgrade issue
- To Fix Error Handling problem
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.14
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.1
---------------------------
Problems Fixed:
- Added new IDs support
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.10
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.4.1
---------------------------
Problems Fixed:
- GA release for 19A. No FW changes.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.4
---------------------------
Problems Fixed:
- Updated legacy PXE ROM: Roll back legacy PXE ROM to work around runtime footprint too large issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.3
---------------------------
Problems Fixed:
- Updated uefi undi with signed driver
- Updated ncsi code to fix:
- only two ports on when AC first applied for 5719
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.2
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Some config options have no default values.
- Update bmapilnx to fix:
- Failed to update FW under SLES 15
- FW update stopped with "file is too big" error
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.8
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.1
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Update Firmware Bundle description.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.6
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.3
---------------------------
Problems Fixed:
- Updated bmapilnx to fix:
- Can't enumerate devices in SLES15.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.2
---------------------------
Problems Fixed:
- Updated UEFI UNDI driver to fix:
- Can't update Port Enablement HII option in ThinkSystem.
- Enhance HII formset title to include MAC address.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.1
---------------------------
Problems Fixed:
- Updated FW Upgrade Utilities to:
- Disable check for Fcode allowing removal if needed.
- Enable logging for command line mode.
- Updated UEFI UNDI driver to fix:
- Bogus "SMASH" entry appears in HII after LOM update.
- Fix for permanent MAC address reporting.
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.1.1
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.12.0
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
Problems Fixed:
Enhancements:
- Combined package for both ThinkSystem and System x products
===============================================================================
===============================================================================
Firmware Version: 20.6.4.3a
---------------------------
Boot Code
ASIC Version
---- -------
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.6.13
PXE Code 20.6.1
ISCSI Code 20.6.2
Problems Fixed:
Enhancements:
- Initial release of ThinkSystem adapters:
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484)
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482)
===============================================================================
===============================================================================
Firmware Version: 17.4.4.8-c
----------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Corrected an issue where the Permanent MAC Address reported via IMM may
be incorrect or duplicated
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.4.7a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.8
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Fixed issue with tx/rx flow control in shared nic mode where connection
to IMM is lost for a period of time after the server is powered off.
- Fixed issue with mac address filtering in shared nic mode where
connection to IMM is lost after a system reboot.
Enhancements:
- Added individual port enable/disable functionality in F1 Setup and
ASU/OneCLI for the following:
Adapters: NetXtreme I Quad Port GbE Adapter
Systems (LOMs): x3650 M5, x3550 M5, x3500 M5
===============================================================================
===============================================================================
Firmware Version: 17.4.4.2a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- Updated the firmware update tool, a bug was found where it would not
attempt to update package version 15.x.x code.
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.3.3a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- ASU or XClarity is not able to restore default ISCSi settings
(such as 0.0.0.0) for adapters 90Y9352 and 90Y9370
- Invalid ISCSI parameters detected with ASU or XClarity on adapter
49Y7900.
- Flex x220 does not provide correct UUID to BOFM.
- Updated permanent MAC address retrieval logic when reporting the
value to AIM.
- Update permanent MAC address retrieval logic when reporting value to
additional AIM fields.
- Updated driver to modify attribute pattern strings for OEM devices.
- Removed extraneous HII page which was causing OEM parameter
extraction utility to show improper configuration.
- Update permanent MAC address retrieval logic when reporting value to
AIM.
Enhancements:
Broadcom NX-E Ethernet Firmware Update for Linux (For Linux)
===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
Firmware Version: 222.1.73.0
Problems Fixed:
- CS00012250847: NXE 57414 / 57416 temperature monitor (thermal threshold values)
- CS00012250134: Bug 260109 – Ginger fails to UEFI PXE boot when VLAN is enabled and priority is set
- CS00012243272: Baby has intermittent link failure on boot connected to Arista 7050
- DCSG01225043: Getting "Invalid Auto detect Speed exclude mask" error while setting the link speed to 10G on WH+ adapter
- DCSG01218679: Inline reset support for stratus adapaters
- DCSG01210868: [2.22 Lenovo EGS]: selftest failed on Stratus (BCM957454-P425SL) adapter
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Code Type Current
-----------------------------
Boot Code 222.0.153.0
PXE Code 222.0.153.0
UEFI Code 222.0.153.0
ISCSI Code 222.0.153.0
NCSI Code 222.0.153.0
RDMA FW 222.0.153.0
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Code Type Current
-----------------------------
Boot Code 222.0.153.0
PXE Code 222.0.153.0
UEFI Code 222.0.153.0
ISCSI Code 222.0.153.0
NCSI Code 222.0.153.0
RDMA FW 222.0.153.0
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 222.0.153.0
PXE Code 222.0.153.0
UEFI Code 222.0.153.0
ISCSI Code 222.0.153.0
NCSI Code 222.0.153.0
RDMA FW 222.0.153.0
===============================================================================
Firmware Version: 222.1.68.0
Problems Fixed:
- DCSG01142321: when Ethernet Port toggled by changing SPeed Erros " Error (timeout: 500015) msg {0x20 0xc16} len:0" are observed.
- DCSG01224660: Boot Code version number mismatch in HII menu (Firmware Image Menu) ) for Lenovo Wh+, Stratus and Thor
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Code Type Current
-----------------------------
Boot Code 222.0.138.0
PXE Code 222.0.137.0
UEFI Code 222.0.137.0
ISCSI Code 222.0.137.0
NCSI Code 222.0.138.0
RDMA FW 222.0.138.0
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Code Type Current
-----------------------------
Boot Code 222.0.138.0
PXE Code 222.0.137.0
UEFI Code 222.0.137.0
ISCSI Code 222.0.137.0
NCSI Code 222.0.138.0
RDMA FW 222.0.138.0
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 222.0.144.0
PXE Code 222.0.137.0
UEFI Code 222.0.137.0
ISCSI Code 222.0.137.0
NCSI Code 222.0.138.0
RDMA FW 222.0.138.0
===============================================================================
Firmware Version: 222.1.55.0
Problems Fixed:
- DCSG01180009: Update the RXP OOB WOL table with Active MAC
- DCSG01171704: HII: Not able to set flow offload on THOR
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 222.0.123.0
PXE Code 222.0.120.0
UEFI Code 222.0.120.0
ISCSI Code 222.0.120.0
NCSI Code 222.0.123.0
RDMA FW 222.0.123.0
===============================================================================
Firmware Version: 222.1.18.0
Problems Fixed:
- CS00012215295/Bug 241533 - Unable to boot via legacy PXE on Huron 57414 10/25GbE PCIe Adapter
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 222.0.64.0
PXE Code 222.0.64.0
UEFI Code 222.0.64.0
ISCSI Code 222.0.1.0
NCSI Code 222.0.64.0
RDMA FW 222.0.64.0
===============================================================================
Firmware Version: 220.0.45.0
Problems Fixed:
- CTRL-55282: Add support for Broadcom 57504 adapters (WuDang and WuYi ) and 57416 (Madrid LOM)
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 220.0.34.0
PXE Code 220.0.2.0
UEFI Code 220.0.10.0
ISCSI Code 220.0.1.0
NCSI Code 220.0.23.0
RDMA FW 220.0.1.0
===============================================================================
Firmware Version: 219.0.144.0
Problems Fixed:
- CS00012200316: CTRL-55046 NX-E sups change history does not list oldspice 57508 adapter
- CS00012197469:CTRL-54743/Bug 234965 - Broadcom 57454 OCP adapter bandwidth show incorrect under Linux OS
- (CTRL-54577) NVM banks not fully erased during initial creation or a subsequent relocation/resize
- (CTRL-54568) BMC loses MCTP communication after receiving MCTP Prepare For Endpoint Discovery command
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 219.0.112.0
PXE Code 219.0.13.0
UEFI Code 219.0.38.0
ISCSI Code 219.0.1.0
NCSI Code 219.0.83.0
RDMA FW 219.0.2.0
===============================================================================
Firmware Version: 219.0.103.0
Problems Fixed:
- CS00012186124:CTRL-54195/Bug 224059 - [PA_Agile_Sprint51 SDV_LXCA 3.2.0-38_SR850P]Fail to deploy sles15.2 by Broadcom NX-E PCIe 25Gb 1-Port adapter with 1G RJ45 SFP
- CS00012186346:CTRL-53895/Bug 226219 - Link issue with 57414 dual port connecting to Arista switch
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 219.0.90.0
PXE Code 219.0.13.0
UEFI Code 219.0.32.0
ISCSI Code 219.0.1.0
NCSI Code 219.0.68.0
RDMA FW 219.0.2.0
===============================================================================
Firmware Version: 218.0.197.6
Problems Fixed:
- CTRL-54073 CS00012187548: Bug 230926 - [PA_Abyss_SIT_IEC_Stress]System lost Broadcom 57508 card randomly during AC cycle via Qtester
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.197.4
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.197.2
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.197.4
Problems Fixed:
- CTRL-53126:CS00011901206-222716-The Qtester prompt failure message:"VPD/FW check failed Diff found"during AC cycle test to 64 loops under RHE8.2 OS
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.197.3
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.137.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.197.3
Problems Fixed:
- (CTRL-52682) Update CuW coredump decoder with the capability to parse a crashdump
- (CTRL-51492) [Thor WHQL] SDDC Premium failed on Windows 2019
- (CTRL-52613) Port 3 and port 4 link LEDs are on, when the ports are disabled from UEFI HII for Posh
- (CTRL-52190) P2100G: Link will not come up when switch is configured with AN+LT in UEFI
- (CTRL-52815) First port legacy iSCSI Boot configuration info used for all ports
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.197.2
PXE Code 218.0.35.0
UEFI Code 218.0.72.0*
ISCSI Code 218.0.3.0
NCSI Code 218.0.137.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.182.0
Problems Fixed:
- (CTRL-52209) N2100G: port 0 led is on when switch is configured with AN+LT and there is no cable connected during BMC init
- (CTRL-51975) bnxtnvm install take a long time and can eventually fail
- (CTRL-51617) Allow host tools to modify MAC address
- (CTRL-51842) Exclusive access to specific host for hwrm secure cfg command based on build flag
- (CTRL-51752) FW install causes system crash
- (CTRL-51995) Populate the patch version for FW components in ver_get response
- (CTRL-51662) mismatching mtu setting causing transport timeout
- (CTRL-51067) FW error recovery occurs during FW install
- (CTRL-51699) Not able to link up with customer AoC PAM4 cable with switch port configured in 100G PAM4
- (CTRL-47848) The Temperature GPIOs behaves incorrectly on certain OCP3 NICs
- (CTRL-51476) CFW: Wh+ SUT stuck at boot after firmware upgrade
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.162.0
PXE Code 218.0.33.0
UEFI Code 218.0.70.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.132.0
RDMA FW 218.0.5.0
===============================================================================
Firmware Version: 218.0.129.16
Problems Fixed:
- CS00011624756:CTRL-51995:Bug 221573 - [PA_Storage_21A_SDV_Lenovo_BDC_AMD_Steel] The NCSI version& RDMA FW version of Ginger under UEFI HII is different with the .chg file
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.129.14
PXE Code 218.0.26.0
UEFI Code 218.0.129.3*
ISCSI Code 218.0.3.0
NCSI Code 218.0.129.6
RDMA FW 218.0.129.2
===============================================================================
Firmware Version: 218.0.129.15
Problems Fixed:
- CS00011480591:Bug 217731 - [PA_Anarky_SDV_IEC_Storage] Broadcom 57454 10GBASE-T 4-port OCP LED didn’t work after flash FW to 218.0.96.6(OSS:116011)
- CS00011476285:CTRL-51508 - Bug 218520 - [PA_Anarky_SDV_IEC_Storage] Broadcom 57508 100GbE QSFP56 2-port PCIe connector display "Unknown" in XCC Inventory
- CS00011525506:Bug 219322 - [21A BBFV-old spice] 200GbE should not be configurable in UEFI setting menu
- CS00011530447:CTRL-51633 - Bug 219255 - [oldspice bbfv] when npar is enabled, the first partition of each port has rdma disabled, all other ports are enabled
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.129.13
PXE Code 218.0.26.0
UEFI Code 218.0.129.3*
ISCSI Code 218.0.3.0
NCSI Code 218.0.129.6
RDMA FW 218.0.129.2
===============================================================================
Firmware Version: 218.0.120.0
Problems Fixed:
- (CTRL-50980) [218.0 Lenovo] Error recovery not working on Stratus adapter when VFs are created, hwrm errors seen after crashing fw, PF link goes down
- (CTRL-51119) Advertise HW arbitration capability correctly
- (CTRL-50025) Transmit timeout observed when running RoCE stress test
- (CTRL-49821) CS00010924757 - Bug 210132 - [PA_Europa_SDV_LNV_LXCA]Use the pattern change the Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter settings failed
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.109.0
PXE Code 218.0.22.0
UEFI Code 218.0.49.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.91.0
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.96.6
Problems Fixed:
- (CTRL-49547): Bug 211143 - Outage after broadcast storm with Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter
- (CTRL-50695): ESX failed to recover upon mbuf leak
- (CTRL-49888): Add a monitor scheme to check and notify driver if hw has disabled a rx or aggr ring
- (CTRL-48487): Display user friendly cos queue names in ethtool -S
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.96.4
PXE Code 218.0.18.0
UEFI Code 218.0.40.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.96.2
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.120.0
Problems Fixed:
- (CTRL-50980) [218.0 Lenovo] Error recovery not working on Stratus adapter when VFs are created, hwrm errors seen after crashing fw, PF link goes down
- (CTRL-51119) Advertise HW arbitration capability correctly
- (CTRL-50025) Transmit timeout observed when running RoCE stress test
- (CTRL-49821) CS00010924757 - Bug 210132 - [PA_Europa_SDV_LNV_LXCA]Use the pattern change the Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter settings failed
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.109.0
PXE Code 218.0.22.0
UEFI Code 218.0.49.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.91.0
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.96.6
Problems Fixed:
- (CTRL-49547): Bug 211143 - Outage after broadcast storm with Broadcom NX-E PCIe 10Gb 2-Port Base-T Ethernet Adapter
- (CTRL-50695): ESX failed to recover upon mbuf leak
- (CTRL-49888): Add a monitor scheme to check and notify driver if hw has disabled a rx or aggr ring
- (CTRL-48487): Display user friendly cos queue names in ethtool -S
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.96.4
PXE Code 218.0.18.0
UEFI Code 218.0.40.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.96.2
RDMA FW 218.0.2.0
===============================================================================
Firmware Version: 218.0.81.0
Problems Fixed:
- None ; Adding Thor support into Lenovo 218.0 inital release
Incremental Interoperability:
- None
Known Issues:
- None
This package updates the Broadcom Firmware Code to the levels shown under the
"Current" column for the devices listed below :
Broadcom 57454 10GBASE-T 4-Port PCIe Ethernet Adapter BCM957454-P410SLBT
Broadcom 57414 10/25GbE SFP28 2-port PCIe Ethernet Adapter BCM957414A4141LC
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter BCM957416N4161LC
Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957454-P425SL
Broadcom NX-E ML2 10Gb 2-Port Base-T Ethernet Adapter (7ZT7A00497) BCM957416A4160L
Broadcom 57416 10GBASE-T 2-port OCP Ethernet Adapter BCM957416N4160LC
Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapte BCM957454-N410SLBT
Broadcom 57414 10/25GbE SFP28 2-port OCP Ethernet Adapter BCM957414N4140LC
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57454 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957454-N425SNL
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.71.0
PXE Code 218.0.15.0
UEFI Code 218.0.33.0
ISCSI Code 218.0.3.0
NCSI Code 218.0.60.0
RDMA FW 218.0.1.0
Broadcom 57508 100GbE QSFP56 2-port PCIe 4 Ethernet Adapter BCM957508-P2100L
Broadcom 57508 100GbE QSFP56 2-Port OCP Ethernet Adapter BCM957508-N2100L
Broadcom 57504 10/25GbE SFP28 4-port OCP Ethernet Adapter BCM957504-N425L
Broadcom 57504 10/25GbE SFP28 4-port PCIe Ethernet Adapter BCM957504-P425L
Code Type Current
-----------------------------
Boot Code 218.0.71.0
PXE Code 218.0.15.0
UEFI Code 218.0.33.0
Broadcom NX-1 Ethernet Device Driver for SLES15 (For Sles)
===============================================================================
Broadcom Netxtreme Device Driver for Linux
===============================================================================
Device Driver Version: 3.139e
Problems Fixed:
- tg3: (DCSG01200384) Support tg3 on pre GA RHEL 9
(DCSG01154843) Fix compilation warning in RHEL 8.5
(DCSG01071772) Support RPS by adding queue information into skb
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 3.139b
Problems Fixed:
- tg3: Added new Os support
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 3.139a
Problems Fixed:
- tg3: Fix SLES15.2 build issue
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 3.138b
Problems Fixed:
- tg3: Fix setting MTU issue in RHEL8
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 3.138a
Problems Fixed:
- tg3: Support RHEL 8.1/7.8 and SLES 12.5
Incremental Interoperability:
- None
Known Issues:
- None
Broadcom NX-E Ethernet Advanced Device Driver Package for SLES15 (For Sles)
===============================================================================
Broadcom Netxtreme Device Driver for Linux
===============================================================================
Device Driver Version: 1.10.2-222.0.150.0
RDMA Driver Version: 222.0.150.0
RDMA User Space Library Version: 222.0.150.0
Problems Fixed:
- (DCSG01229551) CSET Port of Defect DCSG01215915: RoCE interface name not created on Ubunu 20.04
- (DCSG01194633) N2100G: rx_total_netpoll_discards increasing during iperf test
- (DCSG01206343) CSET Port of Defect DCSG01191170: DSCP value in CM packets fixed to zero and cannot be changed with bnxt_setupcc.sh / bnxtqos
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.2-222.0.142.0
RDMA Driver Version: 222.0.142.0
RDMA User Space Library Version: 222.0.142.0
Problems Fixed:
- DCSG01194535: bnxt_en: Driver acquires ptp_lock spinlock before it is initialized
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.2-222.0.125.0
RDMA Driver Version: 222.0.125.0
RDMA User Space Library Version: 222.0.125.0
Problems Fixed:
- DCSG01162018: failure observed after running selftest while running ib_write_bw IO with 64kqps and L2 IO
- DCSG01167085: Observing modify HW QP failed while trying to launch 4k ibv_srq_pingpong applications.
- DCSG01168451: Observing system crash when doing ungraceful PCI reset
Incremental Interoperability:
- None
Known Issues:
- None
==============================================================================
Device Driver Version: 1.10.2-222.0.64.0
RDMA Driver Version: 222.0.64.0
RDMA User Space Library Version: 222.0.64.0
Problems Fixed:
- Initial release for 222.0 branch
Incremental Interoperability:
- None
Known Issues:
- None
==============================================================================
Device Driver Version: 1.10.2-220.0.10.0
RDMA Driver Version: 220.0.10.0
RDMA User Space Library Version: 220.0.3.0
Problems Fixed:
- (CTRL-55115) devlink reload action driver_reinit with RoCE driver loaded makes interface down with "tx ring
reservation failure" error
Incremental Interoperability:
- None
Known Issues:
- None
==============================================================================
Device Driver Version: 1.10.2-219.0.55.0
RDMA Driver Version: 219.0.55.0
RDMA User Space Library Version: 219.0.8.0
Problems Fixed:
- (CTRL-55035) Incorrect stored PSID version reported by devlink dev info.
Incremental Interoperability:
- None
Known Issues:
- None
Device Driver Version: 1.10.2-219.0.54.0
RDMA Driver Version: 219.0.36.0
RDMA User Space Library Version: 219.0.8.0
Problems Fixed:
- (CTRL-54950) IRQ names displayed in /proc may be truncated for devices with exceptionally long namest
- (CTRL-54943) Error recovery broken after an aborted reset
- (CTRL-54932) NPAR bnxt_en crash during fw reset
- (CTRL-54779) bnxt_en compile errors with strscpy() on some 4.x kernels
- (CTRL-54774) Observing Tx timeouts and host crashes when running RoCE IO with the doorbell rate greater than the
HW supported rate
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.2-219.0.40.0
RDMA Driver Version: 219.0.27.0
RDMA User Space Library Version: 219.0.8.0
Problems Fixed:
Initial 219 release to add new OS kernel support
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.2-218.0.73.0
RDMA Driver Version: 218.0.42.0
RDMA User Space Library Version: 218.0.7.0
Problems Fixed:
(CTRL-46049) Update gitmodules for existing release stream
Incremental Interoperability:
- None
Known Issues:
- None
================================================================================
Device Driver Version: 1.10.2-218.0.72.0
RDMA Driver Version: 218.0.39.0
RDMA User Space Library Version: 218.0.7.0
Problems Fixed:
(CTRL-51412) Attempt recovery after aborted reset
(CTRL-28843) Devlink framework support added
(CTRL-50917) bnxtnvm commands take long time to complete after nitro crash
(CTRL-51007) Support initial push index on if up
(CTRL-51041) Internal development JIRA for TC flower development
(CTRL-51187) Add TX push statistics
(CTRL-51264) Driver fails the reset and brings down the interface during reset
(CTRL-51760) Updated driver printk in dmesg
(CTRL-51855) Port stays up during PF ifdown if there are active VFs
(CTRL-51940) Add a new lock vf_rep_lock to protect VF-rep avoid deadlock
(CTRL-51779) Compat fixes for newer kernels
(CTRL-51752) FW install causes system crash
(CTRL-51662) mismatching mtu setting causing transport timeout
(CTRL-51370) RoCE congestion control config script prints misleading lldpad serivce related message
Incremental Interoperability:
- None
Known Issues:
- None
================================================================================
Device Driver Version: 1.10.1-218.0.129.3*
RDMA Driver Version: 218.0.129.2
RDMA User Space Library Version: 218.0.6.0
Problems Fixed:
- (CTRL-43042) Support PTP for 57500 chips
- (CTRL-50702) Add support to dump stored firmware versions via devlink info_get cb
- (CTRL-51377) ethtool -S tx_bytes and rx_bytes counter values far exceed actual values
Incremental Interoperability:
- None
Known Issues:
- None
==============================================================================
Device Driver Version: 1.10.1-218.0.120.1
RDMA Driver Version: 218.0.120.1
RDMA User Space Library Version: 218.0.6.0
Problems Fixed:
- (CTRL-37565) Add support for PCIE stats, RX stats and FEC stats
- (CTRL-50072) "0.000 Gb/s available PCIe bandwidth (Unknown speed x8 link)" log might be observed on 57414 VFs
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.1-218.0.96.2
RDMA Driver Version: 218.0.96.1
RDMA User Space Library Version: 218.0.5.0
Problems Fixed:
- (CTRL-30332) Add Thor support to Linux L2 driver.
- (CTRL-50812) Host may crash if there is race between async events during driver unload.
- (CTRL-50687) warnings while compiling bnxt_re and upstream kernel
- (CTRL-50659) ibv_devinfo fails with memory corruption on ubuntu 20.04 LTS
Incremental Interoperability:
- None
Known Issues:
- None
===============================================================================
Device Driver Version: 1.10.1-218.0.40.0
RDMA Driver Version: 218.0.20.0
RDMA User Space Library Version: 218.0.3.0
Problems Fixed:
- CS00010945438/CTRL-49886: Bug 209650 - The FW information is blank when Broadcom nxe card uses "ibstat" to view port information
Incremental Interoperability:
- None
Known Issues:
- None