Lenovo YUM Repository
Release and Change History
Lenovo YUM Repository
Release and Change History
| Bundle Release Information: |
| Targeted Server Family (Machine Type): ThinkSystem SR860 V2 Server (7Z59, 7Z60, 7D42) |
| Targeted Operating System: SLES12SP4 |
| YUM Repository Build Date: 2024_01_16 |
| Device: |
| ThinkSystem 7mm NVMe 2-Bay Rear RAID Enablement Kit (OOB) | Part Number: 4XH7A60928 Feature Code: na |
||||
|---|---|---|---|---|---|
| PCIe Sub Vendor ID: 0x1D49 PCIe Sub Device ID: 0x0307 |
| Release History: |
| Release Change History Documents |
Firmware Update for Lenovo ThinkSystem M.2 with Mirroring Enablement Kit
Supported Adapters: Lenovo ThinkSystem M.2 with Mirroring Enablement Kit
NOTE TO SERVICE - Reference RETAIN #N/A
******************************************************
******************************************************
================================================================================
- Package Version: 20211008
- Changes:
- Modules:
- Firmware: 1.0.20.1052*
- OPROM: 1.0.20.0010
- UEFI: v0.0.20.0009
- Legacy BIOS: v0.0.0.1009
- Management CLI: 1.0.20.1049
- MVF: 0.0.0.0024
- HBA page generate tool: 1003
- Firmware:
1. Fix [Generic] Fix NEVOXFW-697: Backend SSD firmware version info in "info -o pd" is not updated after upgrading backend SSD firmware (CA=3)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================================================
- Package Version: 20210707
- Changes:
- Modules:
- Firmware: 1.0.20.1051*
- MVF: 0.0.0.0024
- Management CLI: 1.0.20.1049
- OPROM: 1.0.20.0010
- HBA page generate tool: 1003
- Firmware:
1. Fix [NEVOXFW-558] System has CPU uncorrectable error during DC cycle with 7mm/M.2 NVMe. (This fix already exists in FW1050)
2. Fix [NEVOXFW-580] hot plug-in PD/VD caused nevox FW hung.
3. Add EP side PHY reset if the Reset done bit(0xE1248158) not set at EP side. Modify Samsung delay function.
4. Fix [FLASHAE-788] ESXi NVMe Driver Offlines NevoX due to Temperature
================================================================================
- Package Version: 20210531
- Changes:
- Modules:
- Firmware: 1.0.20.1050*
- MVF: 0.0.0.0024
- Management CLI: 1.0.20.1049
- OPROM: 1.0.20.0010
- HBA page generate tool: 1003
- Firmware:
1. Fix [NEVOXFW-21] R3_NevoX_Keep_VD_Status_after_updaing_rawbin
- FW update with Oprom using CLI(in-band)
2. Add error handling for Samsung PM983
1. delay reset :
Add PHY reset if the Reset done bit(0xE1248158) not set.
Modify delay from 100ms to 1000ms for samsung SSD.
2. hotplug:
Add a delay timer(1000ms) at hotplug interrupt to wait Samsung PM983 link up.
3. Fix [NEVOXFW-593][NEVOXFW-560]Critical event string show wrong.
4. Fix [NEVOXFW-335] NevoX controller, VD, PD lost by running FIO test
- FIO write command timeout will cause Nevox lost on host.
- Include the WUNC command to IO count.
- Do not write UNC if command timeout.
5. Fix [NEVOXFW-432] The mnv_cli events lost when use very heavy command.
==============================================================================================================
Note:
1. Two firmware images are for ISCO(0x0306) and KERBEROS(0x0307).
2. Two MVF tools are for ISCO(0x0306) and KERBEROS(0x0307)
3. OPROM is sign finished
4. CLI is sign finished
Release history:
- Package Version: 20201224
- Date Release: 12/24/2020
- Author: Hana Hsu
- Changes:
- Modules:
- Firmware: 1.0.20.1049*
- MVF: 0.0.0.0024
- Management CLI: 1.0.20.1049*
- OPROM: 1.0.20.0010*
- HBA page generate tool: 1003
- Firmware:
1. Fix NEVOXFW-392 [MI][Known Issue] NVMe admin command with error, the error status will not be cleared
2. Fix NEVOXFW-107 VD is not rebuilding when autorebuild setting is ON
3. Fix NEVOXFW-106 VD delete failed during IO stress test
4. Fix [MI] Controller Health Status Poll, status code bug
5. Add new event:
MNV_NVME_EVT_PD_DFT_ADD
MNV_NVME_EVT_PD_DFT_REMOVE_FIX
MNV_NVME_EVT_PD_DFT_REMOVE_NOT_FIX
MNV_NVME_EVT_PD_READ_ERROR
MNV_NVME_EVT_PD_WRITE_ERROR
- MVF:
- Management CLI:
1. [NEVOXFW-403] Updated API document about BGA status and Passthrough chapter.
2. Updated command about get BGA status need to query with VD id.
3. Fixed windows return incorrect error code.
- OPROM:
UEFI v0.0.20.0009
1. Fix [NEVOXFW-370][Case:00245711] Bug 218834 - [PA_WST_Milan_SDV_FixConfig32_XCC] Error to get GET "/redfish/v1/schemas/registries/BiosAttributeRegistry.1.0.0.json".
- HBA page generate tool:
Notice:
1) Please using mvf to update raw binary(go.bat -uwholeimage -y).
2) raw.bin is manufacture binary(it will included all data in the SPI/NOR).
3) CLI Version Definition [Major][Minor][OEM][Build Version]
[Minor]
0:Full Version
1:Lite Version
4) VMware Management CLI Known Issue:
Because inbox driver not allow vendor specific command which direction is write with PRP buffer,
So we remove and show these command not support. The effect commands as below:
1. create
2. delete
3. spi -t write
4. passthru -r write
5. oemdata
6. vpdwrite
Use cmd 'vd -a create' and 'vd -a delete' to create and delete VD.
- Limitation and notice:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ===Very imporpant=== !!
!!1. Please use DOS utility and type "go.bat -uwholeimage -y" to flash raw.bin. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================================================
- Package Version: 20200930
- Date Release: 09/30/2020
- Author: Hana Hsu
- Changes:
- Modules:
- Firmware: 1.0.20.1048*
- MVF: 0.0.0.0022
- Management CLI: 1.0.20.1047*
- OPROM: 1.0.20.0009*
- HBA page generate tool: 1003
- Firmware:
1. Add MCTP packet sequence number
- MVF:
- Management CLI:
1. Fixed NEVOXFW-54. The CLI show smart info sometimes no value in windows 2019.
2. Fixed NevoXFW-232. Removed shell mode. Windows and UEFI should not contain shell mode.
3. Fixed command "set" parameter error.
4. Fixed NEVOXFW-86, about OS volume checking issue.
- OPROM:
UEFI v0.0.20.0008
01. Fix [Case:00242477] - After deleting RAID volume and restarting the system to let the Isco kit create RAID0 (JBOD) for each M.2 Drive, there will be 2 RAID0 on the "Create RAID Configuration" page.
02. Update get PCIe slot number that dependt on EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Configuration().
- HBA page generate tool:
Notice:
1) Please using mvf to update raw binary(go.bat -uwholeimage -y).
2) raw.bin is manufacture binary(it will included all data in the SPI/NOR).
3) CLI Version Definition [Major][Minor][OEM][Build Version]
[Minor]
0:Full Version
1:Lite Version
4) VMware Management CLI Known Issue:
Because inbox driver not allow vendor specific command which direction is write with PRP buffer,
So we remove and show these command not support. The effect commands as below:
1. create
2. delete
3. spi -t write
4. passthru -r write
5. oemdata
6. vpdwrite
Use cmd 'vd -a create' and 'vd -a delete' to create and delete VD.
- Limitation and notice:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ===Very imporpant=== !!
!!1. Please use DOS utility and type "go.bat -uwholeimage -y" to flash raw.bin. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
===============================================================================
- Package Version: 20200731
- Date Release: 07/31/2020
- Author: Hana Hsu
- Changes:
- Modules:
- Firmware: 1.0.20.1047*
- MVF: 0.0.0.0022
- Management CLI: 1.0.20.1044*
- OPROM: 1.0.20.0008*
- HBA page generate tool: 1003
- Firmware:
1. [RAID] Fix bugs:
GLC5622-224 CLI hang up after stopping media patrol
GLC5622-225 CLI hang up after stopping VD initialization
- MVF:
- Management CLI:
1. Fixed PD firmware update flow.
2. Fixed nevo firmware update fail issue.
- OPROM:
UEFI v0.0.20.0007
01. Fix VD name can NOT show 16 characters.
02. Update passthru command return EFI_SUCCESS when FW download commit command return
"Firmware Application Requires Conventional Reset".
03. Fix [Case:00240188] - Lenovo RTP / Whitley M.2 Boot: The SSD can not be displayed in
[Physical Device Information] after loading [Load Default Settings].
- HBA page generate tool:
Notice:
1) Please using mvf to update raw binary(go.bat -uwholeimage -y).
2) raw.bin is manufacture binary(it will included all data in the SPI/NOR).
3) CLI Version Definition [Major][Minor][OEM][Build Version]
[Minor]
0:Full Version
1:Lite Version
4) VMware Management CLI Known Issue:
Because inbox driver not allow vendor specific command which direction is write with PRP buffer,
So we remove and show these command not support. The effect commands as below:
1. create
2. delete
3. spi -t write
4. passthru -r write
5. oemdata
6. vpdwrite
Use cmd 'vd -a create' and 'vd -a delete' to create and delete VD.
- Limitation and notice:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ===Very imporpant=== !!
!!1. Please use DOS utility and type "go.bat -uwholeimage -y" to flash raw.bin. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
================================================================================
- Package Version: 20200630
- Date Release: 06/30/2020
- Author: Hana Hsu
- Changes:
- Modules:
- Firmware: 1.0.20.1046*
- MVF: 0.0.0.0022
- Management CLI: 1.0.20.1043*
- OPROM: 1.0.20.0007*
- HBA page generate tool: 1003
- Firmware:
1. Fix BMC/OOB FW update issue - overlap error handle bug
2. fix gpio 17 interrupt bug
3. Fix [GLC5622-210] Cli's event doesn't show percentage during initialization.
4. LED predict fail ?SMART warning LED on
- MVF:
- Management CLI:
1. Fix "info -o hba" error message issue - All host got from identify controller field 'cntlid'.
2. Removed "abort BGA" flow, when delete VD.
- OPROM:
UEFI v0.0.20.0006
01. Follow request, update NS string "Controller Model Name+NS+id".
[1] "M.2 NVMe 2-Bay RAID Kit-NS1" for 0x0306
[2] "7mm NVMe 2-Bay Rear RAID Kit-NS1" for 0x0307
02. Fix UEFI CLI should not show success after update drive FW failed.
03. Fix all VD info disappeared after deleting only 1 JBOD VD in HII.
04. Replace get PCIe slot id method from SMBIOS type 9 to PCI configuration search.
BIOS v0.0.0.1009
01. Fix Post NS information lose last character of controller model name.
02. Adjust string length from "Namespace+id" to "NS+id".
- HBA page generate tool:
Notice:
1) Please using mvf to update raw binary(go.bat -uwholeimage -y).
2) raw.bin is manufacture binary(it will included all data in the SPI/NOR).
3) CLI Version Definition [Major][Minor][OEM][Build Version]
[Minor]
0:Full Version
1:Lite Version
4) VMware Management CLI Known Issue:
Because inbox driver not allow vendor specific command which direction is write with PRP buffer,
So we remove and show these command not support. The effect commands as below:
1. create
2. delete
3. spi -t write
4. passthru -r write
5. oemdata
6. vpdwrite
Use cmd 'vd -a create' and 'vd -a delete' to create and delete VD.
- Limitation and notice:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! ===Very imporpant=== !!
!!1. Please use DOS utility and type "go.bat -uwholeimage -y" to flash raw.bin. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
----------------------
Version 2.3.22.1004
----------------------
Contains:
Firmware UEFI Driver HII Security Driver
2.3.22.1204 1.1.10.1042(MS) 0.0.20.1005(MS) 0.0.22.0005(MS)
Fix:
Firmware:
1. fix firmware does not trigger auto-rebuild when import a foreign VD that in rebuilding state.
2. support SED status.
HII:
1. Add Disk "Encryption State" into Physical Disk Detail Information page for Hodaka only.
Security Management:
1. Support Lenovo OPAL drives.
OPAL drives model: (1) ATPAF120GSTIC-LV2
(2) AF480GSTIC-LV2
2. fix 4xTCG-e issue
3. Reduce waiting and detection devices time.
----------------------
Version 2.3.22.1002(MS)
----------------------
Contains:
Firmware UEFI Driver HII
2.3.22.1203 1.1.10.1041(MS) 0.0.20.1004(MS)
Fix:
FW:
Locate bit of I2C feature. .
Fix PN/SN disappear from inventory issue.
BIOS:
Remove Legacy BIOS support.
UEFI driver:
No change
HII:
Fix ASU create/delete VD can't work issue.
Update ASU table to support Self Encryption option.
Rollback Hodaka Jupiter(0x0300) UCM mriname(M.2 + Mirroring Kit Configuration Utility).
MS Security signed.
Version 2.3.22.1001(MS)
----------------------
Contains:
Firmware UEFI Driver HII
2.3.22.1201 1.1.10.1041(MS) 0.0.20.1003(MS)
Fix:
BIOS:
Remove Legacy BIOS support, due the Option ROM size too large with MS security signed drivers.
UEFI driver:
Update AHCI UEFI Driver with MS Security Signed.
HII:
Update HII Driver with MS Security Signed.
Security Management:
Update Secyurity Management Driver with MS Security Signed.
Version 2.3.22.1001
----------------------
Contains:
Firmware UEFI Driver HII
2.3.22.1201 1.1.10.1041 0.0.20.1003
Fix:
* Support SPI logging feature.
* Fixed drive marked offline issue under the following scenario: Host issues COMRESET to I/O port while outstanding write commands in queue.
Version 2.3.10.1101
----------------------
Contains:
Firmware UEFI Driver HII
2.3.10.1199 1.1.10.1041 0.0.10.1030
Initial Release
******************************************************
******************************************************Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2024 Lenovo. All rights reserved |