Lenovo Mnvcli (Command Line) Boot Device (M.2/U.2) Linux Utility



Mnvcli (Command Line) Utility for Storage Management

Adapters Supported:
                   ThinkSystem M.2 NVMe 2-Bay RAID Enablement Kit
                   ThinkSystem 7mm NVMe 2-Bay Rear RAID Enablement Kit
                
				
				
				
NOTE TO SERVICE - Reference RETAIN #N/A

1.0.20.1048 - Moderate Impact/Low Probability of Occurrence
--------------------
Management CLI:
     1. Fixed [NEVOXFW-245] RAID0 disk cannot be deleted on one NevoX when install OS on another NevoX card
     1. Fixed NEVOXFW-54. The CLI show smart info sometimes no value in windows 2019.
     2. Fixed NevoXFW-232. Removed shell mode. Windows and UEFI should not contain shell mode.
     3. Fixed command "set" parameter error.
     4. Fixed NEVOXFW-86, about OS volume checking issue.


1.0.20.1044  - Moderate Impact/Low Probability of Occurrence
--------------------
 1. Fixed PD firmware update flow.
	 2. Fixed nevo firmware update fail issue.  
 1. Fix "info -o hba" error message issue - All host got from identify controller field 'cntlid'.
	 2. Removed "abort BGA" flow, when delete VD. 
 1. Fixed [NVMe ControllerNVMEC-768]GPIO/PD ID mapping typo in 88NR2241 CLI User
 2. Fixed [GLC5060-1589] CLI should not show success after update drive FW failed 

1.0.20.1040  - Moderate Impact/Low Probability of Occurrence
--------------------
Initial Release