Broadcom NetXtreme (NX1) Networking Adapter/Device Firmware
===============================================================================
Broadcom Netxtreme Firmware Package
===============================================================================
This package updates the Broadcom Firmware Code to the levels shown under the
"Version" column for the products listed below :
ThinkSystem Adapters ASIC
---------------------------------------- --------
Broadcom 57416 10GBASE-T 2-port + 5720 1GbE 2-port OCP Ethernet Adapter 5720
Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter 5719
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484) 5719
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482) 5720
ThinkSystem SR250 V2 / ST250 V2 5720
ThinkSystem SR250 V3 / ST250 V3 / ST50V3 5720
ThinkEdge SE100 5720
Firmware Version: 230.0.3.1-2
---------------------------
Problems Fixed:
- CS00012330613: DCSG01697524: Populate UpdateInterval field for temperature sensor PDR
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.50
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.4
UEFI Code 21.6.72
ISCSI Code 214.0.152
NCSI Code 1.5.54
===============================================================================
Change History
===============================================================================
Firmware Version: 230.0.1.1-1
---------------------------
Problems Fixed:
- Initial release for 2.30 support
- CS00012327282 - Add support for new Zarkon 5720 LOM
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.50
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.4
UEFI Code 21.6.72
ISCSI Code 214.0.152
NCSI Code 1.5.53
Firmware Version: 227.0.3.1-6
---------------------------
Problems Fixed:
- EFI:
- CS00012316935/DCSG01599937 IONG-199:Bug 301521 [MFG] SR250 V2 - Fails to disable options in MBA menu on both 5719 PCIe card and 5720 LOM
- CS00012321991/DCSG01599805 IONG-729: 5719 & 5720 - Can't get NIC card information in HII via OneCli with FW227.0.2.1
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.50
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.3
UEFI Code 21.6.67
ISCSI Code 214.0.152
NCSI Code 1.5.52
Firmware Version: 227.0.2.1-4
---------------------------
Problems Fixed:
- MBA:
- Update copyright year and version
- NCSI:
- DCSG01555181: Add support to NCSI 'get package status' cmd
- 5719 Boot Code:
- DCSG01545246: Add GPIO2 workaround for OEM 5719 4 port card to enable WoL in G3 state
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.50
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.3
UEFI Code 21.6.63
ISCSI Code 214.0.152
NCSI Code 1.5.52
Firmware Version: 227.0.1.1-1
---------------------------
Problems Fixed:
- UEFI:
- DCSG01373442: Fix SCT errors in HII and Firmware Management protocols
- DCSG01352699: Support for AARCH64 driver
- DCSG01400574: Build using new edk2 tools
- DCSG01414027: Fix missing driver version in PCI header field
- DCSG01436318: Fix supported version advertised in Firmware Management Protocol GetImageInfo
- DCSG01493165: Remove support for EFI_DRIVER_CONFIGURATION_PROTOCOL which has been deprecated from UEFI specification
- NCSI:
- DCSG01444228: Adjust reported NCSI max temperature from 125 to 115 degree celcius
- DCSG01404570: Improve MCTP queue handling logic to avoid queue-lockup issue
- DCSG01493253: Fix HW ARB setting for single device designs
- DCSG01478581: Memory optimization for future bug fix and feature additions.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.2
UEFI Code 21.6.63
ISCSI Code 214.0.152
NCSI Code 1.5.51
Firmware Version: 225.2.1
---------------------------
Problems Fixed:
- UEFI:
- DSCG01214559: Add support to write to new flash parts on BCM5719
- DCSG01336266: Fix RSOD due to bad pointer in DRIVER_HEALTH GetStatus()
- NCSI:
- DCSG01240814: Sector protection support in new flash parts
- DCSG01303207: VLAN Tag field is in the wrong location for Get Parameters NCSI command response
- DCSG01313737: MAC address is not listed in Get Parameters NCSI command response
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.2
UEFI Code 21.6.43*
ISCSI Code 214.0.152
NCSI Code 1.5.44
Firmware Version: 222.0.2.1
---------------------------
Problems Fixed:
- UEFI:
- DCSG01137975: Update controller name strings for certain OEM devices.
- DCSG01127765: Update diagnostics packet test to introduce a small delay when polling for RX packets.
- DCSG01154298: Fix Firmware Management Protocol.CheckImage failure for certain OEM devices.
- DCSG01158497: Support for enabling both RMII and SMBUS at a time
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.2
UEFI Code 21.6.36*
ISCSI Code 214.0.152
NCSI Code 1.5.35
Firmware Version: 221.0.3.1
---------------------------
Problems Fixed:
- UEFI:
- DCSG01129429/CS00012229530: Lenovo Config defaults for LOM design are not consistent
- DCSG01127815/CS00012228772: Bug 248910-NCSI doesn't work, can't switch to shared port, both of NIC "link speed" and "link status" are N/A in XCC WebUI
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.32
MGMT_FW Code 1.12
Firmware Version: 221.0.2.1
---------------------------
Problems Fixed:
- NCSI:
- CTRL-55381: NX1 FW support for 3-bit NCSI package ID
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.32
MGMT_FW Code 1.12
Firmware Version: 219.0.3.1
---------------------------
Problems Fixed:
- UEFI:
- CS00012203540/CTRL-55220: Bug 237813 : Broadcom NX1 5720 Sharknado2 shows incorrect UUID on XCC Inventory page
- CTRL-53890: Populate NCSI firmware version in hex format
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.28*
ISCSI Code 214.0.152
NCSI Code 1.5.30
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 219.0.2.1
---------------------------
Problems Fixed:
- UEFI:
- CTRL-54780: Add support for new LOM device IDs
- CTRL-54509: Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.25
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.4
---------------------------
Problems Fixed:
- UEFI:
- CS00012183815/CTRL-53571:Bug 229387:Broadcom 5719 NIC card physical port1 and port2 didn’t show correct Burned-in Address under XCC website inventory.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.22*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.3
---------------------------
Problems Fixed:
- UEFI:
- CS00012078093/CTRL-53225:Bug227078-[PA_LNV_AMD1P_Milan]SUT fail to install SLES12.5 OS and stop at "loading complete" with Qtester
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.21*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.2
---------------------------
Problems Fixed:
- UEFI:
- CS00012118110 - Bug 227988 - 5719 OCP - Unable to change settings in HII MBA Configuration menu
- CTRL-53239 - Register for ExitBootServices event at TPL_CALLBACK for certain devices
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.20*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.5.1
---------------------------
Problems Fixed:
- UEFI:
- CS00011411798/Bug 214966 - [CFB_Milan][UEFI][BDS]A latency of five seconds when setup menus appears
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.17*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 218.0.4.1
---------------------------
Problems Fixed:
- APE FW:
- CTRL-51120: Report HW Arbitration implementation capability
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9*
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.4
---------------------------
Problems Fixed:
- APE FW:
- CTRL-50770: Side-band Traffic stop observed when running DC cycle stress
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.23
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix VersionName string for FMP
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.5.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.4.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix/update AIM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.7
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.2.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix MBA configuration saving issue
- Fix SN2 AIM data
- Fix various UCM data
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 21.6.6
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 21.6.0
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.7.1
---------------------------
Problems Fixed:
- Bootcode
- Add Aral port enable feature
- UEFI driver
- Fix port enablement issue
- Update default values
- FWupg tool
- Fix VPD V0 update area issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.41
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 21.6.4
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.17
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 216.0.1.1
---------------------------
Problems Fixed:
- UEFI driver
- Fix iSCSI CHAP secret create issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.29
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.14
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.2
---------------------------
Problems Fixed:
- UEFI driver
- Fix Port Enablement feature
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.25
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.6.1
---------------------------
Problems Fixed:
- UEFI driver
- Expose Port Enablement feature
- Observe MBA VLAN setting when no system VLAN ID
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 20.14.24
ISCSI Code 214.0.152
NCSI Code 1.05.12
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.2
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.05.12
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.5
---------------------------
Problems Fixed:
- Updated UEFI driver with signed version
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.4
---------------------------
Problems Fixed:
- Updated UEFI driver
- To increase MTU size to accomodate VLAN packets
- Updated NCSI firmware
- To add changes to shutdown unused ports.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.20
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.152
NCSI Code 1.05.09
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.3
---------------------------
Problems Fixed:
- Updated NCSI FW
- To support 5720 OCP 3.0 Pkg ID scheme
- Updated MBA Driver
- To remove unused Ctrl-K shortcut from MBA menu
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 20.14.17
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.14.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.07
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.2
---------------------------
Problems Fixed:
- Updated UEFI Driver
- To Fix AIM data
- Update FWUpg tool
- To Fix 5718 FW upgrade issue
- To Fix Error Handling problem
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.14
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 214.0.151
NCSI Code 1.05.04
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.5.1
---------------------------
Problems Fixed:
- Added new IDs support
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.14.10
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 214.0.4.1
---------------------------
Problems Fixed:
- GA release for 19A. No FW changes.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.4
---------------------------
Problems Fixed:
- Updated legacy PXE ROM: Roll back legacy PXE ROM to work around runtime footprint too large issue
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.1
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.3
---------------------------
Problems Fixed:
- Updated uefi undi with signed driver
- Updated ncsi code to fix:
- only two ports on when AC first applied for 5719
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.26
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.2
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Some config options have no default values.
- Update bmapilnx to fix:
- Failed to update FW under SLES 15
- FW update stopped with "file is too big" error
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.8
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.5.1
---------------------------
Problems Fixed:
- Updated uefi undi to fix:
- Update Firmware Bundle description.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.6
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 17.4.9
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.3
---------------------------
Problems Fixed:
- Updated bmapilnx to fix:
- Can't enumerate devices in SLES15.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.2
---------------------------
Problems Fixed:
- Updated UEFI UNDI driver to fix:
- Can't update Port Enablement HII option in ThinkSystem.
- Enhance HII formset title to include MAC address.
Incremental Interoperability:
- None
Known Issues:
- None
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.4
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.4.1
---------------------------
Problems Fixed:
- Updated FW Upgrade Utilities to:
- Disable check for Fcode allowing removal if needed.
- Enable logging for command line mode.
- Updated UEFI UNDI driver to fix:
- Bogus "SMASH" entry appears in HII after LOM update.
- Fix for permanent MAC address reporting.
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
System x Adapters / LOMs
-----------------------------
PXE Code 20.6.50
UEFI Code 20.12.3
ISCSI Code 212.0.12.0
NCSI Code 1.04.22
MGMT_FW Code 1.12
===============================================================================
===============================================================================
Firmware Version: 212.0.1.1
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.12.0
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 20.6.50
ISCSI Code 20.8.100.0
NCSI 1.04.22
MGMT_FW 1.12
Problems Fixed:
Enhancements:
- Combined package for both ThinkSystem and System x products
===============================================================================
===============================================================================
Firmware Version: 20.6.4.3a
---------------------------
Boot Code
ASIC Version
---- -------
5719 1.47
5720 1.39
ThinkSystem Adapters / LOMs
---------------------------
UEFI Code 20.6.13
PXE Code 20.6.1
ISCSI Code 20.6.2
Problems Fixed:
Enhancements:
- Initial release of ThinkSystem adapters:
Broadcom NetXtreme PCIe 1Gb 4-Port RJ45 Ethernet Adapter (7ZT7A00484)
Broadcom NetXtreme PCIe 1Gb 2-Port RJ45 Ethernet Adapter (7ZT7A00482)
===============================================================================
===============================================================================
Firmware Version: 17.4.4.8-c
----------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.9
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Corrected an issue where the Permanent MAC Address reported via IMM may
be incorrect or duplicated
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.4.7a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.47
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.8
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.04.01
Problems Fixed:
- Fixed issue with tx/rx flow control in shared nic mode where connection
to IMM is lost for a period of time after the server is powered off.
- Fixed issue with mac address filtering in shared nic mode where
connection to IMM is lost after a system reboot.
Enhancements:
- Added individual port enable/disable functionality in F1 Setup and
ASU/OneCLI for the following:
Adapters: NetXtreme I Quad Port GbE Adapter
Systems (LOMs): x3650 M5, x3550 M5, x3500 M5
===============================================================================
===============================================================================
Firmware Version: 17.4.4.2a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- Updated the firmware update tool, a bug was found where it would not
attempt to update package version 15.x.x code.
Enhancements:
===============================================================================
===============================================================================
Firmware Version: 17.4.3.3a
---------------------------
Boot Code
ASIC Version
---- -------
5717 1.65
5717_C0 2.10
5718 1.65
5719 1.43
5720 1.39
System x Adapters / LOMs
------------------------
UEFI Code 17.4.0
PXE Code 17.2.1
ISCSI Code 18.0.0
IMFW Code 1.12
NCSI Code 1.03.12
Problems Fixed:
- ASU or XClarity is not able to restore default ISCSi settings
(such as 0.0.0.0) for adapters 90Y9352 and 90Y9370
- Invalid ISCSI parameters detected with ASU or XClarity on adapter
49Y7900.
- Flex x220 does not provide correct UUID to BOFM.
- Updated permanent MAC address retrieval logic when reporting the
value to AIM.
- Update permanent MAC address retrieval logic when reporting value to
additional AIM fields.
- Updated driver to modify attribute pattern strings for OEM devices.
- Removed extraneous HII page which was causing OEM parameter
extraction utility to show improper configuration.
- Update permanent MAC address retrieval logic when reporting value to
AIM.
Enhancements: