Lenovo YUM Repository
Release and Change History
Lenovo YUM Repository
Release and Change History
| Bundle Release Information: |
| Targeted Server Family (Machine Type): Lenovo ThinkSystem SR635 (7Y98, 7Y99) |
| Targeted Operating System: SLES15SP6 |
| YUM Repository Build Date: 2025_03_24 |
| Device: |
| ThinkSystem RAID 730-8i 2GB Flash PCIe 12Gb Adapter |
 Device Product Guide |
Part Number: 4Y37A09722 Feature Code: na |
|||
|---|---|---|---|---|---|
| PCIe Sub Vendor ID: 0x1D49 PCIe Sub Device ID: 0x0608 |
| Release History: |
| Release Change History Documents |
BIOS and Firmware Update for ThinkSystem RAID 730-8i XGB Cache PCIe 12Gb Adapter
Supported Adapters: ThinkSystem RAID 730-8i 1GB Cache PCIe 12Gb Adapter
ThinkSystem RAID 730-8i 2GB Cache PCIe 12Gb Adapter
NOTE TO SERVICE - Reference RETAIN #N/A
Version 24.21.0-0151 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0151
BIOS: 6.36.00.3
UEFI Driver:0x06180205
HII:03.25.05.14
MR NVDATA:3.1705.00-0024
iMR NVDATA - 3.1705.01-0018
MR Firmware - 4.680.00-8561
iMR Firmware - 4.680.01-8560
Version 24.21.0-0140 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0140
BIOS: 6.36.00.3
UEFI Driver:0x06180204
HII: 03.25.05.14
MR NVDATA: 3.1705.00-0024
iMR NVDATA - 3.1705.01-0017
MR Firmware - 4.680.00-8539
iMR Firmware - 4.680.01-8538
Version 24.21.0-0112-1 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0112
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.12
MR NVDATA: 3.1705.00-0020
iMR NVDATA - 3.1705.01-0012
MR Firmware - 4.680.00-8489
iMR Firmware - 4.680.01-8488
Version 24.21.0-0113 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0113
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.10
MR NVDATA: 3.1705.00-0018
iMR NVDATA - 3.1705.01-0012
MR Firmware - 4.680.00-8491
iMR Firmware - 4.680.01-8490
Version 24.21.0-0108 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0108
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.12
MR NVDATA: 3.1705.00-0020
iMR NVDATA - 3.1705.01-0012
MR Firmware - 4.680.00-8480
iMR Firmware - 4.680.01-8481
Version 24.21.0-0097 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0097
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.12
MR NVDATA: 3.1705.00-0018
iMR NVDATA - 3.1705.01-0012
MR Firmware - 4.680.00-8458
iMR Firmware - 4.680.01-845
MR 6.14
defects:
- Release Version - MR_FW_SAS3_6.14 (2)
- GCA Release Version 00.72.00.03 - MR_FW_SAS_Mega_API (2)(SCGCQ01943823)
- Pre-Alpha Release Version 005.028.000.000 - MR_FW_SAS_Mega_API (1)(SCGCQ01851145)
- Alpha Release Version 005.030.000.000 - MR_FW_SAS_Mega_API (1)(SCGCQ01881298)
- ReleaseCandidate Release Version 005.036.000.000 - MR_FW_SAS_Mega_API (1)(SCGCQ01940381)
- Point Release Version 07.0800.0200.0100 - MR_FW_SAS_Mega_API (4)(SCGCQ01963790)
- Pre-Alpha Release Version 0x07100000 - MR_FW_SAS_Mega_API (2)(SCGCQ01957805)
- Alpha Release Version 2.33 - MR_FW_SAS_Mega_API (2)(SCGCQ01916056)
- Pre-Alpha Release Version 4.680.00-8326 - MR_FW_SAS3_6.14_Criteo (1)(SCGCQ01601410)
- Pre-Alpha Release Version 4.680.00-8328 - MR_FW_SAS3_6.14_Criteo (1)(SCGCQ01628338)
- Beta Release Version 4.680.00-8361 - MR_FW_SAS3_6.14_Criteo (1)(SCGCQ01803370)
- Point Release Version 4.680.00-8429 - MR_FW_SAS3_6.14 (1)(SCGCQ01940950)
- Point Release Version 4.680.00-8436 - MR_FW_SAS3_6.14 (4)(SCGCQ01964013)
- Point Release Version 4.680.00-8438 - MR_FW_SAS3_6.14_Point (1)(SCGCQ01990276)
- Beta Release Version 4.680.00-8440 - MR_FW_SAS3_6.14_Criteo (3)(SCGCQ01995309)
- Point Release Version 4.680.00-8442 - MR_FW_SAS3_6.14 (2)(SCGCQ02001171)
- Point Release Version 4.680.00-8444 - MR_FW_SAS3_6.14 (1)(SCGCQ02036836)
- Point Release Version 4.680.00-8446 - MR_FW_SAS3_6.14 (1)(SCGCQ02044956)
- Point Release Version 4.680.00-8450 - MR_FW_SAS3_6.14 (2)(SCGCQ02077217)
- Alpha Release Version 4.680.00-8452 - MR_FW_SAS3_6.14 (1)(SCGCQ02082275)
- Point Release Version 4.680.00-8454 - MR_FW_SAS3_6.14 (2)(SCGCQ02100174)
- Alpha Release Version 4.680.01-8358 - MR_FW_SAS3_6.14_Criteo (1)(SCGCQ01775668)
- Beta Release Version 4.680.01-8359 - MR_FW_SAS3_6.14_Criteo (2)(SCGCQ01789201)
- Point Release Version 4.680.01-8373 - MR_FW_SAS3_6.14_Criteo (1)(SCGCQ01818017)
- Alpha Release Version 4.680.01-8421 - MR_FW_SAS_Mega_API (2)(SCGCQ01927186)
- Alpha Release Version 4.680.01-8424 - MR_FW_SAS3_6.14 (1)(SCGCQ01929242)
- Beta Release Version 4.680.01-8426 - MR_FW_SAS3_6.14 (1)(SCGCQ01934634)
- Beta Release Version 4.680.01-8428 - MR_FW_SAS3_6.14 (2)(SCGCQ01936596)
- Beta Release Version 4.680.01-8441 - MR_FW_SAS3_6.14_Criteo (6)(SCGCQ01995312)
- Point Release Version 4.680.01-8443 - MR_FW_SAS3_6.14 (2)(SCGCQ02001928)
- Point Release Version 4.680.01-8445 - MR_FW_SAS3_6.14 (2)(SCGCQ02036925)
- Point Release Version 4.680.01-8447 - MR_FW_SAS3_6.14 (1)(SCGCQ02045005)
- Point Release Version 4.680.01-8451 - MR_FW_SAS3_6.14 (1)(SCGCQ02077220)
- Alpha Release Version 4.680.01-8453 - MR_FW_SAS3_6.14 (1)(SCGCQ02082278)
- Point Release Version 4.680.01-8455 - MR_FW_SAS3_6.14 (1)(SCGCQ02100177)
- Point Release Version 4.680.01-8459 - MR_FW_SAS3_6.14 (1)(SCGCQ02124527)
- Point Release Version 4.740.00-8432 - MR_FW_SAS_Mega_API (6)(SCGCQ01964017)
- Point Release Version 4.740.00-8433 - MR_FW_SAS3_6.14 (2)(SCGCQ01990295)
- Point Release Version 4.740.00-8434 - MR_FW_SAS3_6.14_Criteo (10)(SCGCQ02047944)
- Point Release Version 4.740.00-8435 - MR_FW_SAS3_6.14 (1)(SCGCQ02112078)
- Beta Release Version 4.740.00-8436 - MR_FW_SAS3_6.14 (2)(SCGCQ02137452)
- Beta Release Version 5.080.02-2362 - MR_FW_SAS_Mega_API (2)(SCGCQ02132036)
- Pre-Alpha Release Version 5.090.00-1810 - MR_FW_SAS_Mega_API (1)(SCGCQ01957200)
- Beta Release Version 5.090.00-1983 - MR_FW_SAS_Mega_API (1)(SCGCQ02018875)
- Pre-Alpha Release Version 5.090.02-1830 - MR_FW_SAS_Mega_API (1)(SCGCQ01964183)
SATA PD does not change to failed state after read medium error detected(SCGCQ01624704)
- Repetitive OOB and LED prints observed in FW logs(SCGCQ01727104)
- FW Crashes when user tries to fetch SMP PassThru Info using Host SLT(SCGCQ01937319)
- Do not allow RAID config in JBOD-WB mode and prevent change of personality if WB mode is set(SCGCQ01685447)
- dev defect - Setting defaults for JBOD-WB mode and code cleanup(SCGCQ01681100)
- Cannot create or mount xfs filesystem using xfsprogs 4.19.x kernel 4.20(SCGCQ02027889)
- xfs_info command run on an XFS file system created on a VD of strip size 1M shows sunit and swidth as 0(SCGCQ02056038)
- CV going into WT mode during learn after upgrading to versions later than 24.18.0-0021 - FW fault after factory defaults(SCGCQ02060813)
- After using hdparm to lock a SATA SSD JBOD drive the drive fails to be unlocked by the MR FW on reboot(SCGCQ02083536)
- Kill adapter observed while running target reset on JBOD WB(SCGCQ01789188)
- SMp command failure in OOB Path(SCGCQ01927021)
- HDET_MR 6.14: OOB - SCSI PassThru Command fails with error code 0x2E (SCGCQ01936541)
- Once pinnedcache is set to off not able to toggle field value in JBOD WB mode(SCGCQ01671213)
- PL Fault observed while running target reset on JBOD WB(SCGCQ01676164)
- MR 6.14: FW reported incorrect value for max data transfer request size as 4 MB in Storcli app.(SCGCQ02023160)
- Kill Adapter observed while running task management on JBOD-WB with IO's (SCGCQ02009801)
- Max number of PDs for PatrolRead to run concurrently should be in range from 1 to MR controller's max configurable PDs(SCGCQ02008420)
- Some Configured drives may change to JBOD and Unconfigure Good after Set JBOD=on and reboot(SCGCQ02080101)
- MR controller was missing in UEFI after reboot when the bootable JBOD drive was removed(SCGCQ02112533)
- MR API - Incorrect value used for MR_DCMD_CTRL_SNAPDUMP_ONDEMAND (SCGCQ01882581)
- MR 6.14 - PD show all StorCLI command fails for UBAD SAS & SATA drives (SCGCQ01915285)
- With ESXi 6.7 OS or latter, a SATA SSD drive that is configured as EPD will be dropped by OS when driver reload is done(SCGCQ01969605)
- Dev defect: Incorporate the new changes done in MR API(SCGCQ01760667)
- Amber LED not seen for UBAD PD's (SCGCQ01770256)
- Continuous SRAM correctable error prints followed by controller reset(SCGCQ02023839)
- Able to create RAID configuration even after it has been disabled(SCGCQ01670086)
- With a pending personality change, Global hot spares are allowed to be created and should be blocked.(SCGCQ01750315 port of SCGCQ01742187)
- SMP pass through not working when the “PD 0” is BAD drive(SCGCQ01945674 port of SCGCQ01945602)
- (CSETActivity) - MCTP over PCIe discovery(SCGCQ01904092 port of SCGCQ01184923)
- CIT: Same EID assigned to 2 930-8i controllers(SCGCQ01886616 port ofSCGCQ01830180 )
- Controller OCR seen when DM multipathing issues read CDB with zero blocks(SCGCQ01822167 port of SCGCQ01808882)
- Unable to recover config when changing security password before re-inserting drives(SCGCQ01874302 port of SCGCQ01715058)
- 23=Flash programming error while upgrading the Controller FW causes the APP image corruption(SCGCQ02085501 port of SCGCQ02074630)
EnhancementRequest:
- RTTrace Enable/Disable API changes(SCGCQ01830211)
- MR API changes to support EKMS over OOB(SCGCQ01874035)
- API Changes for Driver/FW DCMD HandShake(SCGCQ01841266)
- Added new events for unmap policy change(SCGCQ01871912)
- Add secure boot key update complete event(SCGCQ01928254)
- Including The Time Stamp for every Snap Dump created in the firmware.(SCGCQ01797424)
- Unmap: Define new events for enhanced UNMAP support [MR7.8](SCGCQ01803319)
- Deprecate the snap dump fields that are no longer needed for MR_SNAP_DUMP_PROPERTIES structure(SCGCQ01816724)
- [MR 7.8] API change to return apt failure status for a personality change request(SCGCQ01853480)
- Interrupt coalsecing setting per group of 8 replies queues (h/w VF registers (SCGCQ01886424)
- HDET: Support smp passthrough storeliboob (API changes requirement(SCGCQ01916035)
- Add secure boot support(SCGCQ01792416)
- API change to provide learn complete timestamp(SCGCQ01845269)
- POC in 6.14: WB support and Pinned Cache changes(SCGCQ01581022)
- Aero FW - Reporting SSD wear gauge values for OEM specific customers(SCGCQ01798686)
- Support SC_INQUIRY and SC_LOG_SENSE SCSI Passthrough commands on drives in bad state for a particular OEM(SCGCQ01888257)
- FW changes for the configurable parameters(SCGCQ01609320)
- Add the API to clear all the snap-dumps from firmware.(SCGCQ01824135)
- API Changes - After Vision PSOC FW update, applications should ask the user for power cycle instead of reboot(SCGCQ01765150)
- Add new MFI Status - MFI_STAT_PD_NOT_ELIGIBLE_FOR_LD (SCGCQ01818580)
- HDET: Support smp passthrough in storlib and storeliboob (SCGCQ01799154)
- Fail the drive and do not pin the cache(SCGCQ01584411)
- Integrated Invader PL RO - SCGCQ02000507– phase 14, Version 14.00.11.00 to MR 6.14(SCGCQ02000920)
- [MR 7.8] API change to export "disable least latency mode"(SCGCQ01887495)
- Fix MR_CTRL_INFO to support backward compatibility(SCGCQ01946548)
- Added customer serial number field to MFC Manufacturing 2 structure(SCGCQ01873417)
- Added Support for Triggering SnapDump(SCGCQ01848759)
- Add Board Support Package Image Type to MR_IMAGE_TYPE(SCGCQ01931637)
Version 24.21.0-0084-1 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0084
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.11
NVDATA: 3.1705.00-0018
iMR NVDATA - 3.1705.01-0012
Firmware - 4.680.00-8434
iMR Firmware - 4.680.01-8435
MR 6.14
Defects:
- SATA SSD not discovered by OS during hibernate test.(SCGCQ01949781)
- Intruder and Invader controllers returnning vpd86 error.(SCGCQ01929277)
- FW reports that the board passed BBU Retention test on boards that have a non operational ONFI NAND memory.(SCGCQ01891177 Port Of Defect SCGCQ01934351)
- Invader IMR : PD fails to get marked as foreign on insertion.(SCGCQ01950845 Port Of Defect SCGCQ01955263)
- Preserved Cache doesn't flush back during Foreign Import.(SCGCQ01466831 Port Of Defect SCGCQ01904085)
Version 24.21.0-0076-1 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0076
BIOS: 6.36.00.3
UEFI Driver: 0x06180203
HII: 03.25.05.10
NVDATA: 3.1705.00-0018
iMR NVDATA - 3.1705.01-0012
Firmware - 4.680.00-8417
iMR Firmware - 4.680.01-8406
Defects (8)
- 'CacheVault Flash Size' is showing as 3.0 GB after upgrading FW when it should show 4.0 GB.(SCGCQ01615779)
- criteo: Storcli shows R0 VD as WB in JBOD personality where as FW shows in WT mode.(SCGCQ01714445)
- Revert code changes from CSET SCGCQ01569257.(SCGCQ01717743)
- Customer specific 3108 PCIe add-on card fails to come back while resuming from sleep state S.(SCGCQ01718911)
- FW returns success for enabling encryption when it is failed on the drives.(SCGCQ01830718)
- Line 535 in ../../raid/cachePreserve.c for trying to create Pinned Cache by Cable Pull..(SCGCQ01839662)
- memset the deviceStateLedBitmap properly.(SCGCQ01844264)
- OOB SCSI passthru command (READ DEFECT 12) return without response data.(SCGCQ01793262)
- FW is observing Kill Adapter while CCVD disassociate in progress.(SCGCQ01186806 port of SCGCQ01172369)
- Update the MAXTransferLength properly for Driver enabled 1MB support feature.(SCGCQ01238543 port of SCGCQ01232275)
- FW crashes when FW update(OFU) is done with faluty onfi.(SCGCQ01249569 port of SCGCQ01227115)
- irq handler flooding taskqueue and persistent ID removal corrupting memory.(SCGCQ01399132 port of SCGCQ01299784)
- Firmware allows to add bad blcoks beyond actual number of blocks..(SCGCQ01430024 port of SCGCQ01403292)
- MCTP: Addressing PCIe credirt free issue..(SCGCQ01447186 port of SCGCQ01446811)
- Firmware discovery is not listing all the drives after removal/insert Enclosure Cable with IO.(SCGCQ01579250 port of SCGCQ01555943)
- MR FW memory Leak across driver load/unload.( SCGCQ01579251port of SCGCQ01573393)
- With controller operating in least latency mode, FW hits montask upon running IOs.(SCGCQ01587048 port of SCGCQ01116419)
- Increase the recon BB list entries to align with BBM MAX BAD entries.(SCGCQ01635416 port of SCGCQ01623254)
- Issue: JBOD devices were dropped after unloading driver and reloading driver in linux.(SCGCQ01639846 port of SCGCQ01566087)
- : FW asserts when invalid parameters to set excluded ld for CC is sent to firmware..(SCGCQ01670394 port of SCGCQ01635729)
- Colusa SAS expander reset results in unpredictable performance.(SCGCQ01697517 port of SCGCQ01455811)
- MR 7.6 - "NVCache has gone bad" during POST after flashing the latest package 1226 and rebooted.(SCGCQ01714326 port of SCGCQ01635062)
- When NVRAM value is read from cached address ,primary core reads stale value and skips writing to NVRAM..(SCGCQ01715349 port of SCGCQ01676080)
- F/W Hangs during reboot.(SCGCQ01716602 port of SCGCQ01616551)
- MR7.6: Firmware hit montask running task management reset in loops.(SCGCQ01727364 port of SCGCQ01675742)
- When NVRAM value is read from cached address ,primary core reads stale value and skips writing to NVRAM.(SCGCQ01729680 port of SCGCQ01676080)
- LAS does not show proper state of secured locked drives..(SCGCQ01732045 port of SCGCQ01615781)
- F/W Hangs during reboot.(SCGCQ01758976 port of SCGCQ01616551)
- Pd firmware download timer is calculated accordingly.(SCGCQ01758988 port of SCGCQ01669508)
-.(SCGCQ01763953 port of SCGCQ01749090)
- Smart Return Status passthru command failed on SATA drives.(SCGCQ01806402 port of SCGCQ01555033)
- LAS does not show proper state of secured locked drives..(SCGCQ01807819 port of SCGCQ01615781)
-.(SCGCQ01838484 port of SCGCQ01807938)
- 9460-8i is reporting Chip Temperature of 255 when the ambient temp is about 0 C.(SCGCQ01850339 port of SCGCQ01565568)
- Found invalid event.(SCGCQ01375915 port of SCGCQ01347858)
- 9460-16i disappears from F1 setup after encrypting SED.(SCGCQ01565312 port of SCGCQ01326871)
- Sanitize Support.(SCGCQ01577753 port of SCGCQ01526323)
- Increase the recon BB list entries to align with BBM MAX BAD entries.(SCGCQ01633668 port of SCGCQ01623254)
- Sanitize progress in TTY log showing incorrect elapsed time.(SCGCQ01681594 port of SCGCQ01630577)
- Pd firmware download timer is calculated accordingly.(SCGCQ01682987 port of SCGCQ01669508)
EnhancementRequests (11)
- Integrate phase 12 PL (12.00.13.00) with MR 6.12.(SCGCQ01580766)
- FW change: Request to add NVDATA and PNP IDs for new card introduction.(SCGCQ01826466)
- Integrate Intruder Phase 14 PL - 14.00.10.00 Firmware MR PL Release.(SCGCQ01764776)
- Criteo: API changes reversal.(SCGCQ01760512)
- PL Integration: Integrate Intruder PL phase 13.00.10.00 with MR 6.13 Intruder.(SCGCQ01698033)
- PL Integration : Integrate Invader phase 12.00.14.00 PL with MR 6.12.(SCGCQ01716598)
- RTTrace API Changes.(SCGCQ01745568)
- Mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled..(SCGCQ01757538)
- Unmap: Define new API for enhanced UNMAP support.(SCGCQ01758062)
- Adding API bit to indicate whether forced personality change is supported or not..(SCGCQ01762153)
- PL Integration: Integrate Invader Phase 13.00.10.00 PL with MR 6.13 Invader.(SCGCQ01698045)
Version 24.21.0-0052-1 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0052
BIOS: 6.36.00.2
UEFI Driver: 0x06180202
HII: 03.25.05.04
NVDATA: 3.1705.00-0014
iMR NVDATA - 3.1705.01-0011
Firmware - 4.680.00-8353
iMR Firmware - 4.680.01-8354
Defects (42)
- Intruder Controller Disappear during clean shutdown on OEM server.(SCGCQ01375977)
-.(SCGCQ01753405)
-.(SCGCQ01749090)
- When NVRAM value is read from cached address ,primary core reads stale value and skips writing to NVRAM..(SCGCQ01676080)
- Pd firmware download timer is calculated accordingly.(SCGCQ01669508)
- IO path function accessed by both core is not synchonized..(SCGCQ01640234)
- False alarm of "cache Discarded" when the System, with Invader controller + WT R5 volume, is shutdown normally..(SCGCQ01627751)
-.(SCGCQ01623408)
- Increase the recon BB list entries to align with BBM MAX BAD entries.(SCGCQ01623254)
- MR FW memory Leak across driver load/unload.(SCGCQ01573393)
- Incorrect Micron NAND Model Number read from flash.(SCGCQ01531136)
- MR_6.14 PACK 23 - On performing a cable pull/push operation during drive is in failed state, result to MonTask.(SCGCQ01529830)
- [Factory issue] MR 3108 controller BIOS stop at 3 different initialization screen.(SCGCQ01497858)
- IO access to iMR FW will fail after sveral powercycle.(SCGCQ01494761)
- iMR Compilation fails even with RELEASE option in 6.12 after taking errata MR workaround SCGCQ01323607 and its child defects.(SCGCQ01494566)
- SED Drive become UBad during secure erase on MegaRAID 9361-8i controller.(SCGCQ01473188)
- 6.14 : Reverting the sysDma changes.(SCGCQ01465727)
- On iMR Invader & for 2 enclosures connected in cascaded multi path , power off and then power on the 1st enclosure, PDs not getting detected.(SCGCQ01455949)
- Firmware upgrade/downgrade operation failing on SKINNY controller.(SCGCQ01455133)
- MCTP: Addressing PCIe credirt free issue..(SCGCQ01446811)
- Parameter Page Invalid, Setting channel count based on DDR Size..(SCGCQ01440768)
- FW breaks into montaks with pinned cache and foreign configuration.(SCGCQ01378970)
- FW reported tmm Date of Manufacture 15/25/6.(SCGCQ01395084)
- Interrupting Offload will Lead to Next offload cycle to fail.(SCGCQ01399701)
- Enable WB support via API.(SCGCQ01405242)
- F/W Hangs during reboot.(SCGCQ01616551)
- iMR compilation breaks, exceeding 1MB flash region allocated.(SCGCQ01520940)
- Extend iMR change of trap related data should be in same module as trap ISR..(SCGCQ01514867)
- Workaround for IO access to iMR FW will fail after sveral powercycle on 3004 controller..(SCGCQ01507504)
- linker error resolved.(SCGCQ01472217)
- Problem with I2C Slave communication with external Masters that don’t support slave clock stretching..(SCGCQ01443277)
- MR : Cache data Lost when Term Log is set to "on" and grown bad blocks are there in the controller.(SCGCQ01394288)
-.(SCGCQ01400707)
- Learn cycle shown as active when Learn cycle fails.(SCGCQ01400807)
- Firmware allows to add bad blcoks beyond actual number of blocks..(SCGCQ01403292)
- OCR getting disabled after NVRAM delete.(SCGCQ01719006)
- MCTP : Porting of firmware download fixes from Ventura.(SCGCQ01439651)
- NVCache state not transitioning from 'Faulty' to 'Ok' until after reboot.(SCGCQ01395724)
- Intermittent: On iMR_Invader & cascaded Enclosures, after power off the enclosure, FW holds the PD info and apps display PDs.(SCGCQ01483727)
- controller VPD info is hidden as per OEM request.(SCGCQ01454973)
- SSD SATA JBOD discovered as 0.0MB after re-loading the same driver..(SCGCQ01446965)
- Firmware discovery is not listing all the drives after removal/insert Enclosure Cable with IO.(SCGCQ01555943)
- Infinite loop in onfiSyncModeEnter.(SCGCQ01259314 port of SCGCQ00329024)
- HW workaround implementation for SCGCQ00830272 and SCGCQ01048567.(SCGCQ01326393 port of SCGCQ01323607)
- MR_6.14: Intruder PCI Trapping ISR incorrect logic for config trap address.(SCGCQ01334364 port of SCGCQ01332947)
- Firmware crashes during medium error recovery and Rebuild.(SCGCQ01348660 port of SCGCQ01304521)
- Resulting R0 VD is showing as not consistent after reconstruction..(SCGCQ01348998 port of SCGCQ01288897)
- Imr Invader FW crashes while upgrading from Pkg 24.18.0-0021 to Pkg 24.21.0-0007..(SCGCQ01351814 port of SCGCQ01342601)
- Intruder 4G DDR tuning value has to be changed in MR FW..(SCGCQ01369344 port of SCGCQ01368845)
- Found invalid event.(SCGCQ01375914 port of SCGCQ01347858)
- Placement of an image checkword at data area of NOR flash leads to controller crash.(SCGCQ01375943 port of SCGCQ01375071)
- Block OCR after Clearing NVRAM.(SCGCQ01392471 port of SCGCQ01386919)
- Block OCR after Clearing NVRAM.(SCGCQ01394920 port of SCGCQ01386919)
- SCS/PL debug logs for "rb", "tb", or "dmdiag pl dbg" are sometimes mangled due to multiple mprintf's overlapping.(SCGCQ01399457 port of SCGCQ01283702)
- RedBrick controller hang at DCR Err Logg Address 29e02..(SCGCQ01412795 port of SCGCQ01375159)
- RedBrick controller hang at DCR Err Logg Address 29e02..(SCGCQ01412827 port of SCGCQ01375159)
- LSA hangs when user try to change drive security key..(SCGCQ01412848 port of SCGCQ01342655)
- B200M4 (Carmel/ 3108 iMR): driver crashed after FW update via UCSM (UCSM bundle 2.2(8fS2)A/B to 3.1(2.163)A/B).(SCGCQ01412896 port of SCGCQ01271186)
- Parameter Page Reads fail during ONFI bringup..(SCGCQ01415428 port of SCGCQ01413557)
- heck Consistency doesn't identify double media errors once aborting and starting CC again.(SCGCQ01421932 port of SCGCQ01411591)
- heck Consistency doesn't identify double media errors once aborting and starting CC again.(SCGCQ01421933 port of SCGCQ01411591)
- heck Consistency doesn't identify double media errors once aborting and starting CC again.(SCGCQ01421934 port of SCGCQ01411591)
- Revert the DDR tuning values back to default value.(SCGCQ01446963 port of SCGCQ01444640)
- PL considers Timer Handle=0 and invalid, MR FW did not..(SCGCQ01446983 port of SCGCQ01399026)
- MCTP: Addressing PCIe credirt free issue..(SCGCQ01447187 port of SCGCQ01446811)
- Parameter Page Invalid, Setting channel count based on DDR Size..(SCGCQ01447901 port of SCGCQ01440768)
- Drives in Enclosure spin up values for OEM board is not initialized correctly.(SCGCQ01466081 port of SCGCQ01450221)
- IOMMU fault at address 0x80360000.(SCGCQ01473355 port of SCGCQ01279547)
- Enable DO_REAL_TIME_ISP and DO_DISABLE_ISP_CLAMP flags while flashing CPLD for Intruder cards.(SCGCQ01503730 port of SCGCQ01452026)
- SED Drive become UBad during secure erase on MegaRAID 9361-8i controller.(SCGCQ01503736 port of SCGCQ01473188)
- [Factory issue] MR 3108 controller BIOS stop at 3 different initialization screen.(SCGCQ01519905 port of SCGCQ01497858)
- MR_6.14 PACK 23 - On performing a cable pull/push operation during drive is in failed state, result to MonTask.(SCGCQ01532358 port of SCGCQ01529830)
- OCR is disabled by default is RC build, even NVDATA if it is enabled..(SCGCQ01540279 port of SCGCQ01503204)
- MR7.1/7.3 Termlog/UARTlog - messages sometimes missed in Termlog.(SCGCQ01540361 port of SCGCQ01498188)
-.(SCGCQ01569257 port of SCGCQ01097035)
- If an INVALID applicationMsgTag id received, then failed the command with MFI_OOB_STATUS_INVALID_CMD using command id MAX_OOB_COMMANDS..(SCGCQ01575976 port of SCGCQ01337332)
- Sanitize Support.(SCGCQ01577752 port of SCGCQ01526323)
- SATA PassTrough commands with check condition taking long time to complete..(SCGCQ01582512 port of SCGCQ01561887)
- VMware Passthrough Adapter does not sync time on VM power on.(SCGCQ01595865 port of SCGCQ01592800)
- Jbod become Ugood sometimes after reboot.(SCGCQ01616609 port of SCGCQ01508978)
- Colusa SAS expander reset results in unpredictable performance.(SCGCQ01618030 port of SCGCQ01455811)
- 'CacheVault Flash Size' is showing as 3.0 GB after upgrading FW when it should show 4.0 GB.(SCGCQ01640816 port of SCGCQ01615779)
- Drives are reverted back to JBOD after perfoming instant secure erase.(SCGCQ01683366 port of SCGCQ01615777)
- MR7.1/7.3 Termlog/UARTlog - messages sometimes missed in Termlog.(SCGCQ01714377 port of SCGCQ01498188)
- In HII whether entering the correct pass phrase or the wrong pass phrase a secured SED becomes unsecured.(SCGCQ01715297 port of SCGCQ01301947)
- B200 M5 / Carmel (3108 iMR) - VSAN failure during controller reset test.(SCGCQ01760837 port of SCGCQ01397566)
- MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations.(SCGCQ01339329 port of SCGCQ01332706)
- MR : Cache data Lost when Term Log is set to "on" and grown bad blocks are there in the controller.(SCGCQ01403930 port of SCGCQ01394288)
- Interrupting Offload will Lead to Next offload cycle to fail.(SCGCQ01403958 port of SCGCQ01399701)
- SSD SATA JBOD discovered as 0.0MB after re-loading the same driver..(SCGCQ01447007 port of SCGCQ01446965)
- MCTP : Porting of firmware download fixes from Ventura.(SCGCQ01447173 port of SCGCQ01439651)
- Controller crash observed while running OLTP workload (4K and 16K 16QD).(SCGCQ01447780 port of SCGCQ01438216)
- PL considers Timer Handle=0 and invalid, MR FW did not..(SCGCQ01467708 port of SCGCQ01399026)
- [Factory issue] MR 3108 controller BIOS stop at 3 different initialization screen.(SCGCQ01519906 port of SCGCQ01497858)
- Extend iMR change of trap related data should be in same module as trap ISR..(SCGCQ01521684 port of SCGCQ01514867)
- Event Log Corruption..(SCGCQ01532399 port of SCGCQ01451417)
- Rebuild Rate %100 takes much longer time than %30 while running IO. It should take much shorter time..(SCGCQ01540424 port of SCGCQ01336908)
- Controller crash observed while running OLTP workload.(SCGCQ01565253 port of SCGCQ01447773)
- OEM iMR 8i controller fails to complete an OCR.(SCGCQ01565318 port of SCGCQ01330611)
- Snap3 : Drives drops while running transformation operation on R1 to R5 with 900 Medium errors.(SCGCQ01598538 port of SCGCQ01581661)
- LSA shows Stop Erase option for VDs on which Erase operation is not in progress.(SCGCQ01605097 port of SCGCQ01600267)
- Memset the PinnedDataStructure when DRAM dirty signature is zero.(SCGCQ01724925 port of SCGCQ01713149)
- Firmware crashes during medium error recovery and Rebuild.(SCGCQ01348657 port of SCGCQ01304521)
- Firmware crashes during medium error recovery and Rebuild.(SCGCQ01348658 port of SCGCQ01304521)
- FW is not correctly reporting Hide VD operation as not supported.(SCGCQ01348841 port of SCGCQ01274084)
- MR7.3: 4k PD Configuration can't be imported from iMR to MR Controller. However, it can be imported from MR to iMR.(SCGCQ01402828 port of SCGCQ01395842)
- PL considers Timer Handle=0 and invalid, MR FW did not..(SCGCQ01467725 port of SCGCQ01399026)
- Extend iMR change of trap related data should be in same module as trap ISR..(SCGCQ01520788 port of SCGCQ01514867)
- MR 7.6 - "NVCache has gone bad" during POST after flashing the latest package 1226 and rebooted.(SCGCQ01683358 port of SCGCQ01635062)
- Controller hang with FDE Drive (Micron 510DC).(SCGCQ01328038 port of SCGCQ01304133)
- Assertion failure in ../../mros/mem.c : mb->tag==tag.(SCGCQ01539460 port of SCGCQ01515324)
- Parameter Page Reads fail during ONFI bringup..(SCGCQ01415424 port of SCGCQ01413557)
- If an INVALID applicationMsgTag id received, then failed the command with MFI_OOB_STATUS_INVALID_CMD using command id MAX_OOB_COMMANDS..(SCGCQ01512549 port of SCGCQ01337332)
EnhancementRequests (47)
- New events for PR/CC conflicts and sector size mismatch.(SCGCQ01227051)
- Provide customized default smartpollinterval to 30 for iMR3004 product.(SCGCQ01748252)
- RTTrace API Changes.(SCGCQ01745568)
- API changes needed to support eHBA product series.(SCGCQ01727346)
- Create sanitize events.(SCGCQ01713708)
- Memset the PinnedDataStructure when DRAM dirty signature is zero.(SCGCQ01713149)
- Integrate latest phase 14.0 - 14.00.08.00 PL with MR 6.14.(SCGCQ01682170)
- as per customer request enabled FBU02 and 4G TFM support.(SCGCQ01681106)
- Modify event string APIs for MISSING and OFFLINE LDs.(SCGCQ01628177)
- New configuration params added for EPD-PT devices.(SCGCQ01599607)
- MR API change request to Enable/disable the parallel PD FW update feature based on PNP ID’s.(SCGCQ01595347)
- Integrate latest phase 14 PL with MR 6.14.(SCGCQ01593998)
- Integrate Invader Phase 14 PL - 14.00.06.00 Firmware MR PL Release.(SCGCQ01589431)
- Add support to defeature Cached I/O policy.(SCGCQ01581032)
- Implement Snapdump debugging capability.(SCGCQ01567770)
- Integrate Intruder phase 14 PL - 14.00.08.00 with MR 6.14 Intruder.(SCGCQ01459161)
- customer request for GPIO support..(SCGCQ01452102)
- Enable DO_REAL_TIME_ISP and DO_DISABLE_ISP_CLAMP flags while flashing CPLD for Intruder cards.(SCGCQ01452026)
- Fail to Set SSDSmartErEnabled to TRUE when copyback is disabled.(SCGCQ01403999)
- PL 14.00.07.00 intgration to MR 6.14 intruder..(SCGCQ01401110)
- Integrate phase 14 Intruder PL - 14.00.06.00 with MR 6.14.(SCGCQ01386225)
- Add "Incompatible with Profile" event.(SCGCQ01289924)
- Add MR API bit to indicate the profile is NVMe Only profile.(SCGCQ01216848)
-.(SCGCQ01389581)
- Add Test Link Diagnostic API.(SCGCQ01436268)
- Add a new structure to provide OEMs ability to switch to select either I2C or PCIe as an out of band transport.(SCGCQ01445048)
- Provide OEMs ability to select either I2C or PCIe as an out of band transport.(SCGCQ01450245)
- Update description of MR_DCMD_CTRL_PERSONALITY_SET Dcmd.(SCGCQ01467149)
- Add support for API fields to report SED type of PD.(SCGCQ01587230)
- Add OnOff parameter in Properties2 of Structure MR_CTRL_PROP to enable/disable mix of Enterprise & Opal SED drives.(SCGCQ01593520)
- NVDATA parameter to OPAL SED.(SCGCQ01614689)
- Added a new interface between driver-aops to indicate if 64 bit SGL support is enabled.(SCGCQ01620350)
- Add new MFI Status to block requested operation due to existing controller configuration.(SCGCQ01670135)
- Change the mr.h API comment showing the new return status for the - MR_DCMD_PD_GET_INFO.(SCGCQ01670234)
- API change for Switch attached NVMe HW RAID support for Supermicro backplanes.(SCGCQ01697667)
- Request to enable JBOD for Rambler PNP ID.(SCGCQ01727448)
- Reverted the DDR tuning values.(SCGCQ01625968)
- Porting the changes of NVRAM_Struct from MesaVerde stream to 6.14.(SCGCQ01563144)
- Enhance Messaging Unit error ISR to dump debug information of virtual functions having error.(SCGCQ01553249)
- CacheCade: IO performance need to be improved for WB SVD and WB CCVD combination for specific PnP ID.(SCGCQ01472061)
- FW breaks into montaks with pinned cache and foreign configuration.(SCGCQ01403814)
- Boot message string change for BOOT_MSG_CACHE_DISCARD.(SCGCQ01394348)
- Block OCR after Clearing NVRAM.(SCGCQ01386919)
- PL 14.00.05.00 Integration with Invader MR 6.14.(SCGCQ01384265)
- Added MR_MFC_DEFAULTS.NVMeAbortTO and MR_MFC_DEFAULTS.NVMeMaxControllerResetTO.(SCGCQ01532045)
FW to fail back host command for the wrong value.(SCGCQ01575960)
- Setting DDR flag for ROMB design having new DDR for an OEM.(SCGCQ01466802)
Version 24.21.0-0016 - Moderate Impact/Low Probability of Occurrence
--------------------
PACKAGE: 24.21.0-0016
BIOS: 6.36.00.1_4.19.08.00_0x06180202
UEFI Driver: 0x06180202
HII: 03.25.05.03
NVDT: 3.1705.00-0005
MR FW: 4.680.00-8258
Fixes:
- MR 6.13: Blocked Spin down Pass thru command for configured drives.(SCGCQ01201958)
- In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non(SCGCQ01213915)
- Setting all the ldtoTgtId with 0xff beyond 240 entries.(SCGCQ01215003)
- (SCGCQ01219438)
- MR_EVT_PD_ERROR_STATS events are logged when drive is moved to REBUILD/UNCONFIGURED BAD/ONLINE/OFFLINE. Also correct DCMD(SCGCQ01223284)
- FW crashes when FW update(OFU) is done with faluty onfi(SCGCQ01227115)
- Coverity issues:fixed the coverity defects.(SCGCQ01230560)
- Update the MAXTransferLength properly for Driver enabled 1MB support feature(SCGCQ01232275)
- Assertion failure in ../../dm/mpt2/mptrec.c at line 3139, while performing cable pull/push operation.(SCGCQ01235505)
- corrected the span index(SCGCQ01236287)
- Coverity issue 15748 and 17765(SCGCQ01241568)
- Drive Strength values are incorrect for last 8 phys of Red Brick Controller(SCGCQ01241680)
- Change Slew Rate on dual rank RedBrick Boards to fix ECC Errors.(SCGCQ01242817)
- Cache Data lost if power loss happens during descriptor preparation.(SCGCQ01253076)
- 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.(SCGCQ01256120)
- Assertion failure in ../../raid/2108vI2o.c at line 2398 on flashing firmware(SCGCQ01258563)
- Dev defect to address action items identified during Ventura(SCGCQ01260609)
- Dev defect to handle HW action items identified during Intruder(SCGCQ01261213)
- Cache data Lost when Term Log is set to "on"(SCGCQ01261426)
- 6.13 ONFI_PORT: If power loss occurs after OCR, FW might lose tty log.(SCGCQ01262834)
- 6.13_ONFI_PORT: Program the erase and wait count values during ONFI Initialization.(SCGCQ01262883)
- 6.13 ONFI PORT :Set bit 0 in global Interrupt Register so that host will receive an interrupt.(SCGCQ01262884)
- Flash File System Reads fail after system reset.(SCGCQ01267220)
- FW does not remember user induced bad blocks across boots.(SCGCQ01267700)
- MR 6.13(SCGCQ01268066)
- Unable to access device PD (SSD)(SCGCQ01268412)
- MR_6.13:FW flash pack (SCGCQ01273216)
- Cache Restore fails if supercap is removed while cache offload is in Progress.(SCGCQ01274494)
- Unable to set termlog on/off from storcli intermittently on Intruder Armstrong board.(SCGCQ01278512)
- Storcli Failed to create single PD R0 from UGood drive which has replaced a UBAD foreign drive(SCGCQ01282181)
- Intruder : After Termlog Toggling with power cycle, result to ERROR: Dirty disk cache data has been lost(SCGCQ01282319)
- Modify Read Eye Training Algorithm to make it spec compliant.(SCGCQ01283719)
- High DB and Log write(SCGCQ01285311)
- Coverity reported an uninitialized variable(SCGCQ01285595)
- OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned)(SCGCQ01287286)
- Reboot the system with 240 R0 Volumes and changing the mode(SCGCQ01288297)
- PL Fault 0000601e observed while running multipath on/off script in JBOD mode.(SCGCQ01288781)
- erase types and startSecureEraseNonSED is set accordingly(SCGCQ01289147)
- Modify NVDATA boot message to rename 'NVDATA image' to 'firmware image'(SCGCQ01290201)
- Cache data lost event seen for WT vds(SCGCQ01313607)
- Kill adapater observed while running IO's on 240 Volumes(SCGCQ01313950)
- Coverity: Fixing Coverity defect 16148(SCGCQ01316152)
- Fixing the coverity raised issue(SCGCQ01318465)
- Coverity issue 19341(SCGCQ01319291)
- HW workaround implementation for SCGCQ00830272 and SCGCQ01048567(SCGCQ01323607)
- auto config is not happening in some cases after issuing storcli /cx set autopdcache=r0(SCGCQ01323848)
- MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations(SCGCQ01332706)
- MR_6.14: Intruder PCI Trapping ISR incorrect logic for config trap address(SCGCQ01332947)
- ntruder: Fix the Intruder Boot Block compilation and warning issue.(SCGCQ01334292)
- Imr Invader FW crashes while upgrading from Pkg 24.18.0(SCGCQ01342601)
- No amber LED when a configured disk is removed(SCGCQ01343017)
- Controller fails to boot up when migrated from 6.13 to 6.14 FW for Specific OEM(SCGCQ01348114)
- Value defined for the DDR turning parameter DP_IO_VREF_1_2 is wrong for invader boards(SCGCQ01350295)
- MR_INVADER_WORKAROUND_PCIE_IGNORE_REPLY_PARITY_ERROR macro definition missing(SCGCQ01351483)
- Intruder 4G DDR tuning value has to be changed in MR FW.(SCGCQ01368845)
- Lenovo Sebastian Fatal Firmware error when connecting to straight without Group ID support.(SCGCQ01204592)
- FW does not fail unsupported erase type for a PD(SCGCQ01221549)
- Allow Cyrpto erase on non(SCGCQ01222318)
- Fix coverity reported issue(SCGCQ01227079)
- FW is not updating EPDs list exposed to host after drives removal event is posted which is causing dev nodes are not getting deleted on drive removal(SCGCQ01230441)
- Diagnostics report of iMR Invader contains information about R6 and R60 is set to 0(SCGCQ01235661)
- Enable MR_DCMD_PD_ERROR_STATS and the event MR_EVT_PD_ERROR_STATS only for direct attached drives(SCGCQ01237252)
- DATA TLB ERROR, While connecting controller each Port to Back(SCGCQ01252111)
- MR 6.13.1Alpha:Probable Drive/cable issue Event not printed in firmwarelogs on triggering drive/cable error when connected BP(SCGCQ01256005)
- Handling of DCR errors in MSS core(SCGCQ01263110)
- Controller does not boot up while performing cache offload .(SCGCQ01278480)
- Controller cache discarded due to memory/battery problem(SCGCQ01280181)
- Perf(SCGCQ01283507)
- Code review: turn off the onfi when bbu is bad(SCGCQ01297565)
- Coverity issues 19244, 19245, 19246 and 19248(SCGCQ01299214)
- MR 6.14 Intruder(Vail): Intruder Controller hangs in primary core on reboot in Dell Power Edge T620 server.(SCGCQ01299482)
- Fix coverity issue 19253 Structurally dead code in checkCacheOffloadStatus, raid/1078init.c(SCGCQ01300678)
- coverity defects fixed(SCGCQ01300689)
- To fix coverity issue 17759(SCGCQ01317039)
- Found invalid event(SCGCQ01347858)
- Placement of an image checkword at data area of NOR flash leads to controller crash(SCGCQ01375071)
- (SCGCQ01227044)
- FC: 0 CS: 0 offload meta signature not valid, ffffffff observed in FW logs on a system restart.(SCGCQ01299424)
- MR 6.14 (SCGCQ01300667)
- Coverity issue 15356(SCGCQ01301658)
- update the boundary values in UpdateFeatureSetValues()(SCGCQ01209605)
- FW hang finaly leading to kill adatper with inBox driver(SCGCQ01250342)
- MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs(SCGCQ01229929 Port Of SCGCQ01209394)
- FW crashes when FW update(OFU) is done with faluty onfi(SCGCQ01235056 Port Of SCGCQ01227115)
- Server (Purley): Controller (16i) (SCGCQ01235753 Port Of SCGCQ01200311)
- In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non(SCGCQ01237142 Port Of SCGCQ01213915)
- Storcli failed to stop drives LED locating with a range(SCGCQ01241870 Port Of SCGCQ01051728)
- MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs(SCGCQ01242766 Port Of SCGCQ01209394)
- unable to encrypt disk when using no pass(SCGCQ01245596 Port Of SCGCQ01144752)
- Offline Marked DG (RAID0) appearing in RHEL 7 install(SCGCQ01245782 Port Of SCGCQ00995384)
- SAS2208 card reset in DataCenter due to unknown reason(SCGCQ01247264 Port Of SCGCQ01240574)
- RDM in Use(SCGCQ01255837)
- ONFI: To properly handle the OCR case with RESET Status Register.(SCGCQ01259337 Port Of SCGCQ00665475)
- ONFI BBLIST:ONFI BadBlocks: COL disarmed, VDs remain in WB mode, no Administrative Messages to bad flash part.(SCGCQ01260470 Port Of SCGCQ01235856)
- Firmware halts upon changing controller personality to JBOD mode with MCTP enabled(SCGCQ01260889 Port Of SCGCQ01252243)
- Infinite loop in onfiSyncModeEnter(SCGCQ01260995 Port Of SCGCQ00329024)
- FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash(SCGCQ01261425 Port Of SCGCQ01129530)
- Insertion of the boot messages and the evets for montoring the ONFI backup capacity.(SCGCQ01263212 Port Of SCGCQ00433463)
- 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.(SCGCQ01263800 Port Of SCGCQ01256120)
- Handling of DCR errors in MSS core(SCGCQ01263859 Port Of SCGCQ01263110)
- Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970(SCGCQ01264476 Port Of SCGCQ01152321)
- GetAllLDAllowedOperation call in Storelib is not returning Allowed operations when some LDs are deleted(SCGCQ01265445 Port Of SCGCQ01250559)
- FD33xD issues in VMWare(SCGCQ01266300 Port Of SCGCQ01203008)
- In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non(SCGCQ01274496 Port Of SCGCQ01213915)
- MR_6.13:FW flash pack (SCGCQ01280567 Port Of SCGCQ01273216)
- unable to encrypt disk when using no pass(SCGCQ01287082 Port Of SCGCQ01144752)
- Controller cache discarded due to memory/battery problem(SCGCQ01288848 Port Of SCGCQ01280181)
- RAID10 VD goes to failed state after performing RLM(SCGCQ01289123 Port Of SCGCQ01277951)
- IN FAILED ARRAY bit is not being set when a VD is cleared(SCGCQ01289194 Port Of SCGCQ01137359)
- Storcli Failed to create single PD R0 from UGood drive which has replaced a UBAD foreign drive(SCGCQ01290418 Port Of SCGCQ01282181)
- RAID10 VD goes to failed state after performing RLM(SCGCQ01291340 Port Of SCGCQ01277951)
- Controller cache discarded due to memory/battery problem(SCGCQ01291492 Port Of SCGCQ01280181)
- Cannot stop patrol read on PD with medium errors by the stop cmd(SCGCQ01294884 Port Of SCGCQ01063103)
- Perf(SCGCQ01297497 Port Of SCGCQ01283507)
- Code review: turn off the onfi when bbu is bad(SCGCQ01297666 Port Of SCGCQ01297565)
- Code review: turn off the onfi when bbu is bad(SCGCQ01299260 Port Of SCGCQ01297565)
- Perf(SCGCQ01300759 Port Of SCGCQ01283507)
- PL Fault 0000601e observed while running multipath on/off script in JBOD mode.(SCGCQ01304919 Port Of SCGCQ01288781)
- Firmware:(SCGCQ01306491 Port Of SCGCQ01258853)
- 6.14 : To fix IOPATH overflow during linking(SCGCQ01311731 Port Of SCGCQ01311464)
- Unable to access device PD (SSD)(SCGCQ01321307 Port Of SCGCQ01268412)
- OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned)(SCGCQ01326069 Port Of SCGCQ01287286)
- HW workaround implementation for SCGCQ00830272 and SCGCQ01048567(SCGCQ01326394 Port Of SCGCQ01323607)
- B200M4 (Carmel/ 3108 iMR): driver crashed after FW update via UCSM (UCSM bundle 2.2(8fS2)A/B to 3.1(2.163)A/B)(SCGCQ01331892 Port Of SCGCQ01271186)
- B200M4 (Carmel/ 3108 iMR): driver crashed after FW update via UCSM (UCSM bundle 2.2(8fS2)A/B to 3.1(2.163)A/B)(SCGCQ01332726 Port Of SCGCQ01271186)
- MR 6.14 Intruder(Vail): Intruder Controller hangs in primary core on reboot in Dell Power Edge T620 server.(SCGCQ01334334 Port Of SCGCQ01299482)
- MR_6.14: Intruder PCI Trapping ISR incorrect logic for config trap address(SCGCQ01334365 Port Of SCGCQ01332947)
- MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations(SCGCQ01339330 Port Of SCGCQ01332706)
- Cache data lost event seen for WT vds(SCGCQ01349420 Port Of SCGCQ01313607)
- Kill adapater observed while running IO's on 240 Volumes(SCGCQ01350347 Port Of SCGCQ01313950)
- No amber LED when a configured disk is removed(SCGCQ01350771 Port Of SCGCQ01343017)
- Firmware hits montask while reconstruction when drive is pulled out(SCGCQ01351442 Port Of SCGCQ01260340)
- MR 6.13: Blocked Spin down Pass thru command for configured drives.(SCGCQ01351559 Port Of SCGCQ01201958)
- IOMMU fault at address 0x80360000(SCGCQ01356192 Port Of SCGCQ01279547)
- LSA hangs when user try to change drive security key.(SCGCQ01367331 Port Of SCGCQ01342655)
- Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970(SCGCQ01241869 Port Of SCGCQ01152321)
- MR6.12 NVRAM Overflow (SCGCQ01248969 Port Of SCGCQ01230749)
- FD33xD issues in VMWare(SCGCQ01261095 Port Of SCGCQ01203008)
- FD33xD issues in VMWare(SCGCQ01263759 Port Of SCGCQ01203008)
- Configuration lost and system crashed on having a stale configuration connected(SCGCQ01273187 Port Of SCGCQ01170701)
- PL Fault 0000601e observed while running multipath on/off script in JBOD mode.(SCGCQ01304921 Port Of SCGCQ01288781)
- FC: 0 CS: 0 offload meta signature not valid, ffffffff observed in FW logs on a system restart.(SCGCQ01351052 Port Of SCGCQ01299424)
- Controller fails to boot up when migrated from 6.13 to 6.14 FW for Specific OEM(SCGCQ01351614)
- SAS2208 card reset in DataCenter due to unknown reason(SCGCQ01311439 Port Of SCGCQ01240574)
- Drive Strength values are incorrect for last 8 phys of Red Brick Controller(SCGCQ01247082 Port Of SCGCQ01241680)
- Firmware hits montask while reconstruction when drive is pulled out(SCGCQ01282285 Port Of SCGCQ01260340)
- Code review: turn off the onfi when bbu is bad(SCGCQ01299219 Port Of SCGCQ01297565)
- Controller does not boot up while performing cache offload .(SCGCQ01288845 Port Of SCGCQ01278480)
Enhancements:
- New fault code for routine synchronous reset(SCGCQ01264142)
- Vail FW not responding to PWR_REQ in time. Request to up the number of TURs sent before timing out drive.(SCGCQ01373161)
- Disable OOB communication via I2C(SCGCQ01369359)
- Integrate Intruder PL 14.00.04.00 with MR 6.14(SCGCQ01341925)
- PL phase 13.0007.00 integration with MR 6.13(SCGCQ01334112)
- PL integration(SCGCQ01330898)
- Integrate PL phase 14.00.02.00 with MR 6.14(SCGCQ01307233)
- Integrate 13.00.06.00 PL to MR 6.13(SCGCQ01304141)
- PL integration 12.00.10.00 with MR 6.12(SCGCQ01276465)
- Integrated PL 12.0.9.0 with MR 6.12(SCGCQ01268897)
- Shift IOPATH code by 4 cache lines to workaround intruder performance issue.(SCGCQ01262698)
- PR State Machine Clean up during Patrol Read/Check Consistency Conflicts(SCGCQ01260431)
- Integrate intruder PL 13.00.04.00 (SCGCQ01237533)(SCGCQ01238286)
- Integrate PL 13.00.04.00 to MR_FW_SAS3_6.13_4G_DDR(SCGCQ01238126)
- Open up MR_DCMD_CFG_AUTOCFG for iMR for GET operation(SCGCQ01228949)
- Customer requesting digitally signed FW packages on their Intruder controller(SCGCQ01215397)
- MPI 2.5 and 2.6: Need IT FW to send new event for expander failing SMP(SCGCQ01180886)
- MPI 2.5: Add two new reason codes to Active Cable Exception Event Data(SCGCQ01208954)
- MPI 2.5 : Add support for reporting Chassis Slot to Enclosure Page 0(SCGCQ01213028)
- MPI 2.6: Add new firmware download type (CBB BACKUP)(SCGCQ01258005)
- MPI 2.6: Device side PCIe SRNS flag(SCGCQ01276256)
- MPI 2.6: Add new firmware download type (CPLD IMAGE)(SCGCQ01305760)
- IN FAILED ARRAY bit is not being set when a VD is cleared(SCGCQ01137359)
- Integrate Intruder PL 13.00.05.00 (RO SCGCQ01263844)(SCGCQ01265401)
- Add additional sense data to firmware tracker list(SCGCQ01254954)
- Method for determining bad ONFI flash via Storcli & SNMP trap upon NAND flash failure for Aspen and Vail (Invader and Intrude(SCGCQ01219862)
- MPI2.6: Mfg7 support for arbitrary starting slot number(SCGCQ01213267)
- MPI 2.6: Add Aero PCI Device IDs(SCGCQ01373008)
- Isolating faulty cable issue from bad drive issue(SCGCQ01215270)
- PL integration(SCGCQ01268896)
Version 24.18.0-0046-1 - Moderate Impact/Low Probability of Occurrence
--------------------
BIOS: 6.34.01.0_4.19.08.00_0x06160201
UEFI Driver: 06160201
HII: E3.23.06.04
NVDT: 3.1611.00-0012
MR FW: 4.670.00-8194
Package: 24.18.0-0046
- Removed support update via ThinkSystem XClarity Control (XCC) web GUI and Lenovo XClarity Essentials OneCLI -imm option
Version 24.18.0-0046 - New Function Only/No fixes
--------------------
BIOS: 6.34.01.0_4.19.08.00_0x06160201
UEFI Driver: 06160201
HII: E3.23.06.04
NVDT: 3.1611.00-0012
MR FW: 4.670.00-8194Lenovo Data Center Group Linux OS Support Home Page |
| linux.lenovo.com |
© 2018-2025 Lenovo. All rights reserved |